python HTMLTestRunner自动化测试报告美化

由于官方那个太丑了换行输出也会很bug，就没用了，特地整理了下三种类型废话少说：
pyhton 2.x的：

"""
A TestRunner for use with the Python unit testing framework. It
generates a HTML report to show the result at a glance.
The simplest way to use this is to invoke its main method. E.g.
    import unittest
    import HTMLTestRunner
    ... define your tests ...
    if __name__ == '__main__':
        HTMLTestRunner.main()
For more customization options, instantiates a HTMLTestRunner object.
HTMLTestRunner is a counterpart to unittest's TextTestRunner. E.g.
    # output to a file
    fp = file('my_report.html', 'wb')
    runner = HTMLTestRunner.HTMLTestRunner(
                stream=fp,
                title='My unit test',
                description='This demonstrates the report output by HTMLTestRunner.'
                )
    # Use an external stylesheet.
    # See the Template_mixin class for more customizable options
    runner.STYLESHEET_TMPL = ''
    # run the test
    runner.run(my_test_suite)
------------------------------------------------------------------------
Copyright (c) 2004-2007, Wai Yip Tung
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright notice,
  this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
  notice, this list of conditions and the following disclaimer in the
  documentation and/or other materials provided with the distribution.
* Neither the name Wai Yip Tung nor the names of its contributors may be
  used to endorse or promote products derived from this software without
  specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
"""

# URL: http://tungwaiyip.info/software/HTMLTestRunner.html

__author__ = "Wai Yip Tung"
__version__ = "0.8.2"


"""
Change History
Version 0.8.2
* Show output inline instead of popup window (Viorel Lupu).
Version in 0.8.1
* Validated XHTML (Wolfgang Borgert).
* Added description of test classes and test cases.
Version in 0.8.0
* Define Template_mixin class for customization.
* Workaround a IE 6 bug that it does not treat 
%(heading)s
%(report)s
%(ending)s


"""
# variables: (title, generator, stylesheet, heading, report, ending)
# ------------------------------------------------------------------------
# Stylesheet
#
# alternatively use a  for external style sheet, e.g.
# 
STYLESHEET_TMPL = """

"""
# ------------------------------------------------------------------------
# Heading
#
HEADING_TMPL = """



%(title)s
%(parameters)s
%(description)s








""" # variables: (title, parameters, description)
HEADING_ATTRIBUTE_TMPL = """
%(name)s: %(value)s
""" # variables: (name, value)
# ------------------------------------------------------------------------
# Report
#
REPORT_TMPL = """

Show
Summary
Failed
All


%(test_list)s










Test Group/Test case
Count
Pass
Fail
Error
View

Total
%(count)s
%(Pass)s
%(fail)s
%(error)s
 


""" # variables: (test_list, count, Pass, fail, error)
REPORT_CLASS_TMPL = r"""

%(desc)s
%(count)s
%(Pass)s
%(fail)s
%(error)s
Detail

""" # variables: (style, desc, count, Pass, fail, error, cid)
REPORT_TEST_WITH_OUTPUT_TMPL = r"""

%(desc)s



%(status)s



[x]

                %(script)s
                




""" # variables: (tid, Class, style, desc, status)
REPORT_TEST_NO_OUTPUT_TMPL = r"""

%(desc)s
%(status)s

""" # variables: (tid, Class, style, desc, status)
REPORT_TEST_OUTPUT_TMPL = r"""
%(id)s: %(output)s
""" # variables: (id, output)
# ------------------------------------------------------------------------
# ENDING
#
ENDING_TMPL = """
 
"""
# -------------------- The end of the Template class -------------------
TestResult = unittest.TestResult
class _TestResult(TestResult):
# note: _TestResult is a pure representation of results.
# It lacks the output and reporting ability compares to unittest._TextTestResult.
def __init__(self, verbosity=1):
TestResult.__init__(self)
self.stdout0 = None
self.stderr0 = None
self.success_count = 0
self.failure_count = 0
self.error_count = 0
self.verbosity = verbosity
# result is a list of result in 4 tuple
# (
# result code (0: success; 1: fail; 2: error),
# TestCase object,
# Test output (byte string),
# stack trace,
# )
self.result = []
def startTest(self, test):
TestResult.startTest(self, test)
# just one buffer for both stdout and stderr
self.outputBuffer = StringIO.StringIO()
stdout_redirector.fp = self.outputBuffer
stderr_redirector.fp = self.outputBuffer
self.stdout0 = sys.stdout
self.stderr0 = sys.stderr
sys.stdout = stdout_redirector
sys.stderr = stderr_redirector
def complete_output(self):
"""
Disconnect output redirection and return buffer.
Safe to call multiple times.
"""
if self.stdout0:
sys.stdout = self.stdout0
sys.stderr = self.stderr0
self.stdout0 = None
self.stderr0 = None
return self.outputBuffer.getvalue()
def stopTest(self, test):
# Usually one of addSuccess, addError or addFailure would have been called.
# But there are some path in unittest that would bypass this.
# We must disconnect stdout in stopTest(), which is guaranteed to be called.
self.complete_output()
def addSuccess(self, test):
self.success_count += 1
TestResult.addSuccess(self, test)
output = self.complete_output()
self.result.append((0, test, output, ''))
if self.verbosity > 1:
sys.stderr.write('ok ')
sys.stderr.write(str(test))
sys.stderr.write('\n')
else:
sys.stderr.write('.')
def addError(self, test, err):
self.error_count += 1
TestResult.addError(self, test, err)
_, _exc_str = self.errors[-1]
output = self.complete_output()
self.result.append((2, test, output, _exc_str))
if self.verbosity > 1:
sys.stderr.write('E ')
sys.stderr.write(str(test))
sys.stderr.write('\n')
else:
sys.stderr.write('E')
def addFailure(self, test, err):
self.failure_count += 1
TestResult.addFailure(self, test, err)
_, _exc_str = self.failures[-1]
output = self.complete_output()
self.result.append((1, test, output, _exc_str))
if self.verbosity > 1:
sys.stderr.write('F ')
sys.stderr.write(str(test))
sys.stderr.write('\n')
else:
sys.stderr.write('F')
class HTMLTestRunner(Template_mixin):
"""
"""
def __init__(self, stream=sys.stdout, verbosity=1, title=None, description=None):
self.stream = stream
self.verbosity = verbosity
if title is None:
self.title = self.DEFAULT_TITLE
else:
self.title = title
if description is None:
self.description = self.DEFAULT_DESCRIPTION
else:
self.description = description
self.startTime = datetime.datetime.now()
def run(self, test):
"Run the given test case or test suite."
result = _TestResult(self.verbosity)
test(result)
self.stopTime = datetime.datetime.now()
self.generateReport(test, result)
print >>sys.stderr, '\nTime Elapsed: %s' % (self.stopTime-self.startTime)
return result
def sortResult(self, result_list):
# unittest does not seems to run in any particular order.
# Here at least we want to group them together by class.
rmap = {}
classes = []
for n,t,o,e in result_list:
cls = t.__class__
if not rmap.has_key(cls):
rmap[cls] = []
classes.append(cls)
rmap[cls].append((n,t,o,e))
r = [(cls, rmap[cls]) for cls in classes]
return r
def getReportAttributes(self, result):
"""
Return report attributes as a list of (name, value).
Override this to add custom attributes.
"""
startTime = str(self.startTime)[:19]
duration = str(self.stopTime - self.startTime)
status = []
if result.success_count: status.append('Pass %s' % result.success_count)
if result.failure_count: status.append('Failure %s' % result.failure_count)
if result.error_count: status.append('Error %s' % result.error_count )
if status:
status = ' '.join(status)
else:
status = 'none'
return [
('Start Time', startTime),
('Duration', duration),
('Status', status),
]
def generateReport(self, test, result):
report_attrs = self.getReportAttributes(result)
generator = 'HTMLTestRunner %s' % __version__
stylesheet = self._generate_stylesheet()
heading = self._generate_heading(report_attrs,result)
report = self._generate_report(result)
ending = self._generate_ending()
output = self.HTML_TMPL % dict(
title = saxutils.escape(self.title),
generator = generator,
stylesheet = stylesheet,
heading = heading,
report = report,
ending = ending,
)
self.stream.write(output.encode('utf8'))
def _generate_stylesheet(self):
return self.STYLESHEET_TMPL
def _generate_heading(self, report_attrs,result):
a_lines = []
for name, value in report_attrs:
line = self.HEADING_ATTRIBUTE_TMPL % dict(
name = saxutils.escape(name),
value = saxutils.escape(value),
)
a_lines.append(line)
heading = self.HEADING_TMPL % dict(
title = saxutils.escape(self.title),
parameters = ''.join(a_lines),
description = saxutils.escape(self.description),
Pass = str(result.success_count),
fail = str(result.failure_count),
error = str(result.error_count),
)
return heading
def _generate_report(self, result):
rows = []
sortedResult = self.sortResult(result.result)
for cid, (cls, cls_results) in enumerate(sortedResult):
# subtotal for a class
np = nf = ne = 0
for n,t,o,e in cls_results:
if n == 0: np += 1
elif n == 1: nf += 1
else: ne += 1
# format class description
if cls.__module__ == "__main__":
name = cls.__name__
else:
name = "%s.%s" % (cls.__module__, cls.__name__)
doc = cls.__doc__ and cls.__doc__.split("\n")[0] or ""
desc = doc and '%s: %s' % (name, doc) or name
row = self.REPORT_CLASS_TMPL % dict(
style = ne > 0 and 'errorClass' or nf > 0 and 'failClass' or 'passClass',
desc = desc,
count = np+nf+ne,
Pass = np,
fail = nf,
error = ne,
cid = 'c%s' % (cid+1),
)
rows.append(row)
for tid, (n,t,o,e) in enumerate(cls_results):
self._generate_report_test(rows, cid, tid, n, t, o, e)
report = self.REPORT_TMPL % dict(
test_list = ''.join(rows),
count = str(result.success_count+result.failure_count+result.error_count),
Pass = str(result.success_count),
fail = str(result.failure_count),
error = str(result.error_count),
)
return report
def _generate_report_test(self, rows, cid, tid, n, t, o, e):
# e.g. 'pt1.1', 'ft1.1', etc
has_output = bool(o or e)
tid = (n == 0 and 'p' or 'f') + 't%s.%s' % (cid+1,tid+1)
name = t.id().split('.')[-1]
doc = t.shortDescription() or ""
desc = doc and ('%s: %s' % (name, doc)) or name
tmpl = has_output and self.REPORT_TEST_WITH_OUTPUT_TMPL or self.REPORT_TEST_NO_OUTPUT_TMPL
# o and e should be byte string because they are collected from stdout and stderr?
if isinstance(o,str):
# TODO: some problem with 'string_escape': it escape \n and mess up formating
# uo = unicode(o.encode('string_escape'))
uo = o.decode('utf-8')
else:
uo = o
if isinstance(e,str):
# TODO: some problem with 'string_escape': it escape \n and mess up formating
# ue = unicode(e.encode('string_escape'))
ue = e.decode('utf-8')
else:
ue = e
script = self.REPORT_TEST_OUTPUT_TMPL % dict(
id = tid,
output = saxutils.escape(uo+ue),
)
row = tmpl % dict(
tid = tid,
Class = (n == 0 and 'hiddenRow' or 'none'),
style = n == 2 and 'errorCase' or (n == 1 and 'failCase' or 'none'),
desc = desc,
script = script,
status = self.STATUS[n],
)
rows.append(row)
if not has_output:
return
def _generate_ending(self):
return self.ENDING_TMPL
##############################################################################
# Facilities for running tests from the command line
##############################################################################
# Note: Reuse unittest.TestProgram to launch test. In the future we may
# build our own launcher to support more specific command line
# parameters like test title, CSS, etc.
class TestProgram(unittest.TestProgram):
"""
A variation of the unittest.TestProgram. Please refer to the base
class for command line parameters.
"""
def runTests(self):
# Pick HTMLTestRunner as the default test runner.
# base class's testRunner parameter is not useful because it means
# we have to instantiate HTMLTestRunner before we know self.verbosity.
if self.testRunner is None:
self.testRunner = HTMLTestRunner(verbosity=self.verbosity)
unittest.TestProgram.runTests(self)
main = TestProgram
##############################################################################
# Executing this module from the command line
##############################################################################
if __name__ == "__main__":
main(module=None)

接下里介绍python3.x的：

# FileName : MyHTMLTestRunner.py
# Author   : walkpython
# DateTime : 2018/10/9 21:04
# SoftWare : PyCharm
"""
A TestRunner for use with the Python unit testing framework. It
generates a HTML report to show the result at a glance.

The simplest way to use this is to invoke its main method. E.g.

    import unittest
    import HTMLTestRunner

    ... define your tests ...

    if __name__ == '__main__':
        HTMLTestRunner.main()


For more customization options, instantiates a HTMLTestRunner object.
HTMLTestRunner is a counterpart to unittest's TextTestRunner. E.g.

    # output to a file
    fp = file('my_report.html', 'wb')
    runner = HTMLTestRunner.HTMLTestRunner(
                stream=fp,
                title='My unit test',
                description='This demonstrates the report output by HTMLTestRunner.'
                )

    # Use an external stylesheet.
    # See the Template_mixin class for more customizable options
    runner.STYLESHEET_TMPL = ''

    # run the test
    runner.run(my_test_suite)


------------------------------------------------------------------------
Copyright (c) 2004-2007, Wai Yip Tung
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

* Redistributions of source code must retain the above copyright notice,
  this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
  notice, this list of conditions and the following disclaimer in the
  documentation and/or other materials provided with the distribution.
* Neither the name Wai Yip Tung nor the names of its contributors may be
  used to endorse or promote products derived from this software without
  specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
"""

# URL: http://tungwaiyip.info/software/HTMLTestRunner.html

__author__ = "Wai Yip Tung,  Findyou，Adil"
__version__ = "0.8.2.3"


"""
Change History
Version 0.8.2.1 -Findyou
* 改为支持python3

Version 0.8.2.1 -Findyou
* 支持中文，汉化
* 调整样式，美化（需要连入网络，使用的百度的Bootstrap.js）
* 增加 通过分类显示、测试人员、通过率的展示
* 优化“详细”与“收起”状态的变换
* 增加返回顶部的锚点

Version 0.8.2
* Show output inline instead of popup window (Viorel Lupu).

Version in 0.8.1
* Validated XHTML (Wolfgang Borgert).
* Added description of test classes and test cases.

Version in 0.8.0
* Define Template_mixin class for customization.
* Workaround a IE 6 bug that it does not treat 
    
    %(stylesheet)s



%(heading)s
%(report)s
%(ending)s



"""
    # variables: (title, generator, stylesheet, heading, report, ending)


    # ------------------------------------------------------------------------
    # Stylesheet
    #
    # alternatively use a  for external style sheet, e.g.
    #   

    STYLESHEET_TMPL = """

"""

    # ------------------------------------------------------------------------
    # Heading
    #

    HEADING_TMPL = """

%(title)s
%(parameters)s
%(description)s


""" # variables: (title, parameters, description)

    HEADING_ATTRIBUTE_TMPL = """
%(name)s :  %(value)s
""" # variables: (name, value)



    # ------------------------------------------------------------------------
    # Report
    #
    # 汉化,加美化效果 --Yang Yao Jun
    #
    # 这里涉及到了 Bootstrap 前端技术，Bootstrap 按钮 资料介绍详见：http://www.runoob.com/bootstrap/bootstrap-buttons.html
    #
    REPORT_TMPL = """
    

    通过率 [%(passrate)s ]
    通过[ %(Pass)s ]
    错误[ %(error)s ]
    失败[ %(fail)s ]
    所有[ %(count)s ]
    

%(test_list)s










    
用例集/测试用例
    
总计
    
通过
    
错误
    
失败
    
详细

    
总计
    
%(count)s
    
%(Pass)s
    
%(error)s
    
%(fail)s
    
通过率：%(passrate)s


""" # variables: (test_list, count, Pass, fail, error ,passrate)

    REPORT_CLASS_TMPL = r"""

    %(desc)s
    %(count)s
    %(Pass)s
    %(error)s
    %(fail)s
    详细

""" # variables: (style, desc, count, Pass, fail, error, cid)

    #失败 的样式，去掉原来JS效果，美化展示效果  -Findyou
    REPORT_TEST_WITH_OUTPUT_TMPL = r"""

    
%(desc)s
    
    

    
    %(status)s
    

    
    %(script)s
    
    
    

""" # variables: (tid, Class, style, desc, status)

    # 通过 的样式，加标签效果  -Findyou
    REPORT_TEST_NO_OUTPUT_TMPL = r"""

    
%(desc)s
    %(status)s

""" # variables: (tid, Class, style, desc, status)

    REPORT_TEST_OUTPUT_TMPL = r"""
%(id)s: %(output)s
""" # variables: (id, output)

    # ------------------------------------------------------------------------
    # ENDING
    #
    # 增加返回顶部按钮  --Findyou
    ENDING_TMPL = """
 
    

    
    
    """

# -------------------- The end of the Template class -------------------


TestResult = unittest.TestResult

class _TestResult(TestResult):
    # note: _TestResult is a pure representation of results.
    # It lacks the output and reporting ability compares to unittest._TextTestResult.

    def __init__(self, verbosity=1):
        TestResult.__init__(self)
        self.stdout0 = None
        self.stderr0 = None
        self.success_count = 0
        self.failure_count = 0
        self.error_count = 0
        self.verbosity = verbosity

        # result is a list of result in 4 tuple
        # (
        #   result code (0: success; 1: fail; 2: error),
        #   TestCase object,
        #   Test output (byte string),
        #   stack trace,
        # )
        self.result = []
        #增加一个测试通过率 --Findyou
        self.passrate=float(0)


    def startTest(self, test):
        TestResult.startTest(self, test)
        # just one buffer for both stdout and stderr
        self.outputBuffer = io.StringIO()
        stdout_redirector.fp = self.outputBuffer
        stderr_redirector.fp = self.outputBuffer
        self.stdout0 = sys.stdout
        self.stderr0 = sys.stderr
        sys.stdout = stdout_redirector
        sys.stderr = stderr_redirector


    def complete_output(self):
        """
        Disconnect output redirection and return buffer.
        Safe to call multiple times.
        """
        if self.stdout0:
            sys.stdout = self.stdout0
            sys.stderr = self.stderr0
            self.stdout0 = None
            self.stderr0 = None
        return self.outputBuffer.getvalue()


    def stopTest(self, test):
        # Usually one of addSuccess, addError or addFailure would have been called.
        # But there are some path in unittest that would bypass this.
        # We must disconnect stdout in stopTest(), which is guaranteed to be called.
        self.complete_output()


    def addSuccess(self, test):
        self.success_count += 1
        TestResult.addSuccess(self, test)
        output = self.complete_output()
        self.result.append((0, test, output, ''))
        if self.verbosity > 1:
            sys.stderr.write('ok ')
            sys.stderr.write(str(test))
            sys.stderr.write('\n')
        else:
            sys.stderr.write('.')

    def addError(self, test, err):
        self.error_count += 1
        TestResult.addError(self, test, err)
        _, _exc_str = self.errors[-1]
        output = self.complete_output()
        self.result.append((2, test, output, _exc_str))
        if self.verbosity > 1:
            sys.stderr.write('E  ')
            sys.stderr.write(str(test))
            sys.stderr.write('\n')
        else:
            sys.stderr.write('E')

    def addFailure(self, test, err):
        self.failure_count += 1
        TestResult.addFailure(self, test, err)
        _, _exc_str = self.failures[-1]
        output = self.complete_output()
        self.result.append((1, test, output, _exc_str))
        if self.verbosity > 1:
            sys.stderr.write('F  ')
            sys.stderr.write(str(test))
            sys.stderr.write('\n')
        else:
            sys.stderr.write('F')


class HTMLTestRunner(Template_mixin):
    """
    """
    def __init__(self, stream=sys.stdout, verbosity=1,title=None,description=None,tester=None):
        self.stream = stream
        self.verbosity = verbosity
        if title is None:
            self.title = self.DEFAULT_TITLE
        else:
            self.title = title
        if description is None:
            self.description = self.DEFAULT_DESCRIPTION
        else:
            self.description = description
        if tester is None:
            self.tester = self.DEFAULT_TESTER
        else:
            self.tester = tester

        self.startTime = datetime.datetime.now()


    def run(self, test):
        "Run the given test case or test suite."
        result = _TestResult(self.verbosity)
        test(result)
        self.stopTime = datetime.datetime.now()
        self.generateReport(test, result)
        print('\nTime Elapsed: %s' % (self.stopTime-self.startTime), file=sys.stderr)
        return result


    def sortResult(self, result_list):
        # unittest does not seems to run in any particular order.
        # Here at least we want to group them together by class.
        rmap = {}
        classes = []
        for n,t,o,e in result_list:
            cls = t.__class__
            if cls not in rmap:
                rmap[cls] = []
                classes.append(cls)
            rmap[cls].append((n,t,o,e))
        r = [(cls, rmap[cls]) for cls in classes]
        return r

    #替换测试结果status为通过率 --Findyou
    def getReportAttributes(self, result):
        """
        Return report attributes as a list of (name, value).
        Override this to add custom attributes.
        """
        startTime = str(self.startTime)[:19]
        duration = str(self.stopTime - self.startTime)
        status = []
        status.append('共 %s' % (result.success_count + result.failure_count + result.error_count))
        if result.success_count: status.append('通过 %s'    % result.success_count)
        if result.failure_count: status.append('失败 %s' % result.failure_count)
        if result.error_count:   status.append('错误 %s'   % result.error_count  )
        if status:
            status = '，'.join(status)
            self.passrate = str("%.2f%%" % (float(result.success_count) / float(result.success_count + result.failure_count + result.error_count) * 100))
        else:
            status = 'none'
        return [
            ('测试人员', self.tester),
            ('开始时间',startTime),
            ('合计耗时',duration),
            ('测试结果',status + "，通过率= "+self.passrate),
        ]


    def generateReport(self, test, result):
        report_attrs = self.getReportAttributes(result)
        generator = 'HTMLTestRunner %s' % __version__
        stylesheet = self._generate_stylesheet()
        heading = self._generate_heading(report_attrs)
        report = self._generate_report(result)
        ending = self._generate_ending()
        output = self.HTML_TMPL % dict(
            title = saxutils.escape(self.title),
            generator = generator,
            stylesheet = stylesheet,
            heading = heading,
            report = report,
            ending = ending,
        )
        self.stream.write(output.encode('utf8'))


    def _generate_stylesheet(self):
        return self.STYLESHEET_TMPL

    #增加Tester显示 -Findyou
    def _generate_heading(self, report_attrs):
        a_lines = []
        for name, value in report_attrs:
            line = self.HEADING_ATTRIBUTE_TMPL % dict(
                    name = saxutils.escape(name),
                    value = saxutils.escape(value),
                )
            a_lines.append(line)
        heading = self.HEADING_TMPL % dict(
            title = saxutils.escape(self.title),
            parameters = ''.join(a_lines),
            description = saxutils.escape(self.description),
            tester= saxutils.escape(self.tester),
        )
        return heading

    #生成报告  --Findyou添加注释
    def _generate_report(self, result):
        rows = []
        sortedResult = self.sortResult(result.result)
        for cid, (cls, cls_results) in enumerate(sortedResult):
            # subtotal for a class
            np = nf = ne = 0
            for n,t,o,e in cls_results:
                if n == 0: np += 1
                elif n == 1: nf += 1
                else: ne += 1

            # format class description
            if cls.__module__ == "__main__":
                name = cls.__name__
            else:
                name = "%s.%s" % (cls.__module__, cls.__name__)
            doc = cls.__doc__ and cls.__doc__.split("\n")[0] or ""
            desc = doc and '%s: %s' % (name, doc) or name

            row = self.REPORT_CLASS_TMPL % dict(
                style = ne > 0 and 'errorClass' or nf > 0 and 'failClass' or 'passClass',
                desc = desc,
                count = np+nf+ne,
                Pass = np,
                fail = nf,
                error = ne,
                cid = 'c%s' % (cid+1),
            )
            rows.append(row)

            for tid, (n,t,o,e) in enumerate(cls_results):
                self._generate_report_test(rows, cid, tid, n, t, o, e)

        report = self.REPORT_TMPL % dict(
            test_list = ''.join(rows),
            count = str(result.success_count+result.failure_count+result.error_count),
            Pass = str(result.success_count),
            fail = str(result.failure_count),
            error = str(result.error_count),
            passrate =self.passrate,
        )
        return report


    def _generate_report_test(self, rows, cid, tid, n, t, o, e):
        # e.g. 'pt1.1', 'ft1.1', etc
        has_output = bool(o or e)
        # ID修改点为下划线,支持Bootstrap折叠展开特效 - Findyou
        tid = (n == 0 and 'p' or 'f') + 't%s_%s' % (cid+1,tid+1)
        name = t.id().split('.')[-1]
        doc = t.shortDescription() or ""
        desc = doc and ('%s: %s' % (name, doc)) or name
        tmpl = has_output and self.REPORT_TEST_WITH_OUTPUT_TMPL or self.REPORT_TEST_NO_OUTPUT_TMPL

        # utf-8 支持中文 - Findyou
         # o and e should be byte string because they are collected from stdout and stderr?
        if isinstance(o, str):
            # TODO: some problem with 'string_escape': it escape \n and mess up formating
            # uo = unicode(o.encode('string_escape'))
            # uo = o.decode('latin-1')
            uo = o
        else:
            uo = o
        if isinstance(e, str):
            # TODO: some problem with 'string_escape': it escape \n and mess up formating
            # ue = unicode(e.encode('string_escape'))
            # ue = e.decode('latin-1')
            ue = e
        else:
            ue = e

        script = self.REPORT_TEST_OUTPUT_TMPL % dict(
            id = tid,
            output = saxutils.escape(uo+ue),
        )

        row = tmpl % dict(
            tid = tid,
            Class = (n == 0 and 'hiddenRow' or 'none'),
            style = n == 2 and 'errorCase' or (n == 1 and 'failCase' or 'passCase'),
            desc = desc,
            script = script,
            status = self.STATUS[n],
        )
        rows.append(row)
        if not has_output:
            return

    def _generate_ending(self):
        return self.ENDING_TMPL


##############################################################################
# Facilities for running tests from the command line
##############################################################################

# Note: Reuse unittest.TestProgram to launch test. In the future we may
# build our own launcher to support more specific command line
# parameters like test title, CSS, etc.
class TestProgram(unittest.TestProgram):
    """
    A variation of the unittest.TestProgram. Please refer to the base
    class for command line parameters.
    """
    def runTests(self):
        # Pick HTMLTestRunner as the default test runner.
        # base class's testRunner parameter is not useful because it means
        # we have to instantiate HTMLTestRunner before we know self.verbosity.
        if self.testRunner is None:
            self.testRunner = HTMLTestRunner(verbosity=self.verbosity)
        unittest.TestProgram.runTests(self)

main = TestProgram

##############################################################################
# Executing this module from the command line
##############################################################################

if __name__ == "__main__":
    main(module=None)