使用docker-compose搭建FastDFS

github下载

下载 libfastcommon https://github.com/happyfish100/libfastcommon/releases
运行FastDFS基础库
下载 FastDFS https://github.com/happyfish100/fastdfs/releases
下载 Nginx http://nginx.org/download/
下载 fastdfs-nginx-module https://github.com/happyfish100/fastdfs-nginx-module/releases

csdn下载

• 我已经将脚本和软件打包成了一个集合，下载地址：https://download.csdn.net/download/tianjia125/12530975
• 下载后
  • 1.先运行 updateIp.py 输入对应的宿主机IP
  • 2.在执行 docker-compose up -d 启动

搭建过程

1. 服务器新建 /usr/local/FastDFS/environment/ 目录

将软件复制进去
nginx-1.19.0.tar.gz
libfastcommon-1.0.43.tar.gz
fastdfs-nginx-module-1.22.tar.gz
fastdfs-6.06.tar.gz

2. 编写 /usr/local/FastDFS/docker-compose.yml

version: '3.1'
services:
  fastdfs:
    build: environment
    restart: always
    container_name: fastdfs
    volumes:
      - ./storage:/fastdfs/storage
      - ./tracker:/fastdfs/tracker
    network_mode: host

3. 编写 /usr/local/FastDFS/environment/tracker.conf 文件

1. port 端口修改
2. base_path 存储路径修改

# is this config file disabled
# false for enabled
# true for disabled
disabled = false

# bind an address of this host
# empty for bind all addresses of this host
bind_addr =

# the tracker server port
port = 22122

# connect timeout in seconds
# default value is 30
# Note: in the intranet network (LAN), 2 seconds is enough.
connect_timeout = 5

# network timeout in seconds for send and recv
# default value is 30
network_timeout = 60

# the base path to store data and log files
base_path = /fastdfs/tracker

# max concurrent connections this server support
# you should set this parameter larger, eg. 10240
# default value is 256
max_connections = 1024

# accept thread count
# default value is 1 which is recommended
# since V4.07
accept_threads = 1

# work thread count
# work threads to deal network io
# default value is 4
# since V2.00
work_threads = 4

# the min network buff size
# default value 8KB
min_buff_size = 8KB

# the max network buff size
# default value 128KB
max_buff_size = 128KB

# the method for selecting group to upload files
# 0: round robin
# 1: specify group
# 2: load balance, select the max free space group to upload file
store_lookup = 2

# which group to upload file
# when store_lookup set to 1, must set store_group to the group name
store_group = group2

# which storage server to upload file
# 0: round robin (default)
# 1: the first server order by ip address
# 2: the first server order by priority (the minimal)
# Note: if use_trunk_file set to true, must set store_server to 1 or 2
store_server = 0

# which path (means disk or mount point) of the storage server to upload file
# 0: round robin
# 2: load balance, select the max free space path to upload file
store_path = 0

# which storage server to download file
# 0: round robin (default)
# 1: the source storage server which the current file uploaded to
download_server = 0

# reserved storage space for system or other applications.
# if the free(available) space of any stoarge server in 
# a group <= reserved_storage_space, no file can be uploaded to this group.
# bytes unit can be one of follows:
### G or g for gigabyte(GB)
### M or m for megabyte(MB)
### K or k for kilobyte(KB)
### no unit for byte(B)
### XX.XX% as ratio such as: reserved_storage_space = 10%
reserved_storage_space = 20%

#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level = info

#unix group name to run this program, 
#not set (empty) means run by the group of current user
run_by_group=

#unix username to run this program,
#not set (empty) means run by current user
run_by_user =

# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" (only one asterisk) means match all ip addresses
# we can use CIDR ips like 192.168.5.64/26
# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
# for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
# allow_hosts=192.168.5.64/26
allow_hosts = *

# sync log buff to disk every interval seconds
# default value is 10 seconds
sync_log_buff_interval = 1

# check storage server alive interval seconds
check_active_interval = 120

# thread stack size, should >= 64KB
# default value is 256KB
thread_stack_size = 256KB

# auto adjust when the ip address of the storage server changed
# default value is true
storage_ip_changed_auto_adjust = true

# storage sync file max delay seconds
# default value is 86400 seconds (one day)
# since V2.00
storage_sync_file_max_delay = 86400

# the max time of storage sync a file
# default value is 300 seconds
# since V2.00
storage_sync_file_max_time = 300

# if use a trunk file to store several small files
# default value is false
# since V3.00
use_trunk_file = false 

# the min slot size, should <= 4KB
# default value is 256 bytes
# since V3.00
slot_min_size = 256

# the max slot size, should > slot_min_size
# store the upload file to trunk file when it's size <=  this value
# default value is 16MB
# since V3.00
slot_max_size = 1MB

# the alignment size to allocate the trunk space
# default value is 0 (never align)
# since V6.05
# NOTE: the larger the alignment size, the less likely of disk
#       fragmentation, but the more space is wasted.
trunk_alloc_alignment_size = 256

# if merge contiguous free spaces of trunk file
# default value is false
# since V6.05
trunk_free_space_merge = true

# if delete / reclaim the unused trunk files
# default value is false
# since V6.05
delete_unused_trunk_files = false

# the trunk file size, should >= 4MB
# default value is 64MB
# since V3.00
trunk_file_size = 64MB

# if create trunk file advancely
# default value is false
# since V3.06
trunk_create_file_advance = false

# the time base to create trunk file
# the time format: HH:MM
# default value is 02:00
# since V3.06
trunk_create_file_time_base = 02:00

# the interval of create trunk file, unit: second
# default value is 38400 (one day)
# since V3.06
trunk_create_file_interval = 86400

# the threshold to create trunk file
# when the free trunk file size less than the threshold,
# will create he trunk files
# default value is 0
# since V3.06
trunk_create_file_space_threshold = 20G

# if check trunk space occupying when loading trunk free spaces
# the occupied spaces will be ignored
# default value is false
# since V3.09
# NOTICE: set this parameter to true will slow the loading of trunk spaces 
# when startup. you should set this parameter to true when neccessary.
trunk_init_check_occupying = false

# if ignore storage_trunk.dat, reload from trunk binlog
# default value is false
# since V3.10
# set to true once for version upgrade when your version less than V3.10
trunk_init_reload_from_binlog = false

# the min interval for compressing the trunk binlog file
# unit: second, 0 means never compress
# FastDFS compress the trunk binlog when trunk init and trunk destroy
# recommand to set this parameter to 86400 (one day)
# default value is 0
# since V5.01
trunk_compress_binlog_min_interval = 86400

# the interval for compressing the trunk binlog file
# unit: second, 0 means never compress
# recommand to set this parameter to 86400 (one day)
# default value is 0
# since V6.05
trunk_compress_binlog_interval = 86400

# compress the trunk binlog time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 03:00
# since V6.05
trunk_compress_binlog_time_base = 03:00

# max backups for the trunk binlog file
# default value is 0 (never backup)
# since V6.05
trunk_binlog_max_backups = 7

# if use storage server ID instead of IP address
# if you want to use dual IPs for storage server, you MUST set
# this parameter to true, and configure the dual IPs in the file
# configured by following item "storage_ids_filename", such as storage_ids.conf
# default value is false
# since V4.00
use_storage_id = false

# specify storage ids filename, can use relative or absolute path
# this parameter is valid only when use_storage_id set to true
# since V4.00
storage_ids_filename = storage_ids.conf

# id type of the storage server in the filename, values are:
## ip: the ip address of the storage server
## id: the server id of the storage server
# this paramter is valid only when use_storage_id set to true
# default value is ip
# since V4.03
id_type_in_filename = id

# if store slave file use symbol link
# default value is false
# since V4.01
store_slave_file_use_link = false

# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false

# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time = 00:00

# if compress the old error log by gzip
# default value is false
# since V6.04
compress_old_error_log = false

# compress the error log days before
# default value is 1
# since V6.04
compress_error_log_days_before = 7

# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0

# keep days of the log files
# 0 means do not delete old log files
# default value is 0
log_file_keep_days = 0

# if use connection pool
# default value is false
# since V4.05
use_connection_pool = true

# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600

# HTTP port on this tracker server
http.server_port = 8080

# check storage HTTP server alive interval seconds
# <= 0 for never check
# default value is 30
http.check_alive_interval = 30

# check storage HTTP server alive type, values are:
#   tcp : connect to the storge server with HTTP port only, 
#        do not request and get response
#   http: storage check alive url must return http status 200
# default value is tcp
http.check_alive_type = tcp

# check storage HTTP server alive uri/url
# NOTE: storage embed HTTP server support uri: /status.html
http.check_alive_uri = /status.html

4. 编写 /usr/local/FastDFS/environment/storage.conf 文件

1. base_path 存储路径修改
2. store_path0 存储路径修改
3. tracker_server 只保留1个，tracker ip与端口。这里IP填写自己宿主机的IP

# is this config file disabled
# false for enabled
# true for disabled
disabled = false

# the name of the group this storage server belongs to
#
# comment or remove this item for fetching from tracker server,
# in this case, use_storage_id must set to true in tracker.conf,
# and storage_ids.conf must be configured correctly.
group_name = group1

# bind an address of this host
# empty for bind all addresses of this host
bind_addr =

# if bind an address of this host when connect to other servers 
# (this storage server as a client)
# true for binding the address configured by the above parameter: "bind_addr"
# false for binding any address of this host
client_bind = true

# the storage server port
port = 23000

# connect timeout in seconds
# default value is 30
# Note: in the intranet network (LAN), 2 seconds is enough.
connect_timeout = 5

# network timeout in seconds for send and recv
# default value is 30
network_timeout = 60

# the heart beat interval in seconds
# the storage server send heartbeat to tracker server periodically
# default value is 30
heart_beat_interval = 30

# disk usage report interval in seconds
# the storage server send disk usage report to tracker server periodically
# default value is 300
stat_report_interval = 60

# the base path to store data and log files
# NOTE: the binlog files maybe are large, make sure
#       the base path has enough disk space,
#       eg. the disk free space should > 50GB
base_path = /fastdfs/storage

# max concurrent connections the server supported,
# you should set this parameter larger, eg. 10240
# default value is 256
max_connections = 1024

# the buff size to recv / send data from/to network
# this parameter must more than 8KB
# 256KB or 512KB is recommended
# default value is 64KB
# since V2.00
buff_size = 256KB

# accept thread count
# default value is 1 which is recommended
# since V4.07
accept_threads = 1

# work thread count
# work threads to deal network io
# default value is 4
# since V2.00
work_threads = 4

# if disk read / write separated
##  false for mixed read and write
##  true for separated read and write
# default value is true
# since V2.00
disk_rw_separated = true

# disk reader thread count per store path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_reader_threads = 1

# disk writer thread count per store path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_writer_threads = 1

# when no entry to sync, try read binlog again after X milliseconds
# must > 0, default value is 200ms
sync_wait_msec = 50

# after sync a file, usleep milliseconds
# 0 for sync successively (never call usleep)
sync_interval = 0

# storage sync start time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_start_time = 00:00

# storage sync end time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_end_time = 23:59

# write to the mark file after sync N files
# default value is 500
write_mark_file_freq = 500

# disk recovery thread count
# default value is 1
# since V6.04
disk_recovery_threads = 3

# store path (disk or mount point) count, default value is 1
store_path_count = 1

# store_path#, based on 0, to configure the store paths to store files
# if store_path0 not exists, it's value is base_path (NOT recommended)
# the paths must be exist.
#
# IMPORTANT NOTE:
#       the store paths' order is very important, don't mess up!!!
#       the base_path should be independent (different) of the store paths

store_path0 = /fastdfs/storage
#store_path1 = /home/yuqing/fastdfs2

# subdir_count  * subdir_count directories will be auto created under each 
# store_path (disk), value can be 1 to 256, default value is 256
subdir_count_per_path = 256

# tracker_server can ocur more than once for multi tracker servers.
# the value format of tracker_server is "HOST:PORT",
#   the HOST can be hostname or ip address,
#   and the HOST can be dual IPs or hostnames seperated by comma,
#   the dual IPS must be an inner (intranet) IP and an outer (extranet) IP,
#   or two different types of inner (intranet) IPs.
#   for example: 192.168.2.100,122.244.141.46:22122
#   another eg.: 192.168.1.10,172.17.4.21:22122

tracker_server = 192.168.72.129:22122
#tracker_server = 192.168.209.122:22122

#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level = info

#unix group name to run this program, 
#not set (empty) means run by the group of current user
run_by_group =

#unix username to run this program,
#not set (empty) means run by current user
run_by_user =

# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" (only one asterisk) means match all ip addresses
# we can use CIDR ips like 192.168.5.64/26
# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
# for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
# allow_hosts=192.168.5.64/26
allow_hosts = *

# the mode of the files distributed to the data path
# 0: round robin(default)
# 1: random, distributted by hash code
file_distribute_path_mode = 0

# valid when file_distribute_to_path is set to 0 (round robin).
# when the written file count reaches this number, then rotate to next path.
# rotate to the first path (00/00) after the last path (such as FF/FF).
# default value is 100
file_distribute_rotate_count = 100

# call fsync to disk when write big file
# 0: never call fsync
# other: call fsync when written bytes >= this bytes
# default value is 0 (never call fsync)
fsync_after_written_bytes = 0

# sync log buff to disk every interval seconds
# must > 0, default value is 10 seconds
sync_log_buff_interval = 1

# sync binlog buff / cache to disk every interval seconds
# default value is 60 seconds
sync_binlog_buff_interval = 1

# sync storage stat info to disk every interval seconds
# default value is 300 seconds
sync_stat_file_interval = 300

# thread stack size, should >= 512KB
# default value is 512KB
thread_stack_size = 512KB

# the priority as a source server for uploading file.
# the lower this value, the higher its uploading priority.
# default value is 10
upload_priority = 10

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# default values is empty
if_alias_prefix =

# if check file duplicate, when set to true, use FastDHT to store file indexes
# 1 or yes: need check
# 0 or no: do not check
# default value is 0
check_file_duplicate = 0

# file signature method for check file duplicate
## hash: four 32 bits hash code
## md5: MD5 signature
# default value is hash
# since V4.01
file_signature_method = hash

# namespace for storing file indexes (key-value pairs)
# this item must be set when check_file_duplicate is true / on
key_namespace = FastDFS

# set keep_alive to 1 to enable persistent connection with FastDHT servers
# default value is 0 (short connection)
keep_alive = 0

# you can use "#include filename" (not include double quotes) directive to 
# load FastDHT server list, when the filename is a relative path such as 
# pure filename, the base path is the base path of current/this config file.
# must set FastDHT server list when check_file_duplicate is true / on
# please see INSTALL of FastDHT for detail
##include /home/yuqing/fastdht/conf/fdht_servers.conf

# if log to access log
# default value is false
# since V4.00
use_access_log = false

# if rotate the access log every day
# default value is false
# since V4.00
rotate_access_log = false

# rotate access log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.00
access_log_rotate_time = 00:00

# if compress the old access log by gzip
# default value is false
# since V6.04
compress_old_access_log = false

# compress the access log days before
# default value is 1
# since V6.04
compress_access_log_days_before = 7

# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false

# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time = 00:00

# if compress the old error log by gzip
# default value is false
# since V6.04
compress_old_error_log = false

# compress the error log days before
# default value is 1
# since V6.04
compress_error_log_days_before = 7

# rotate access log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_access_log_size = 0

# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0

# keep days of the log files
# 0 means do not delete old log files
# default value is 0
log_file_keep_days = 0

# if skip the invalid record when sync file
# default value is false
# since V4.02
file_sync_skip_invalid_record = false

# if use connection pool
# default value is false
# since V4.05
use_connection_pool = true

# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600

# if compress the binlog files by gzip
# default value is false
# since V6.01
compress_binlog = true

# try to compress binlog time, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 01:30
# since V6.01
compress_binlog_time = 01:30

# if check the mark of store path to prevent confusion
# recommend to set this parameter to true
# if two storage servers (instances) MUST use a same store path for
# some specific purposes, you should set this parameter to false
# default value is true
# since V6.03
check_store_path_mark = true

# use the ip address of this storage server if domain_name is empty,
# else this domain name will ocur in the url redirected by the tracker server
http.domain_name =

# the port of the web server on this storage server
http.server_port = 8888

5. 编写 /usr/local/FastDFS/environment/mod_fastdfs.conf 文件

1. tracker_server tracker ip与端口
2. url_have_group_name 改 true
3. store_path0 存储路径修改

# connect timeout in seconds
# default value is 30s
connect_timeout=2

# network recv and send timeout in seconds
# default value is 30s
network_timeout=30

# the base path to store log files
base_path=/tmp

# if load FastDFS parameters from tracker server
# since V1.12
# default value is false
load_fdfs_parameters_from_tracker=true

# storage sync file max delay seconds
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# since V1.12
# default value is 86400 seconds (one day)
storage_sync_file_max_delay = 86400

# if use storage ID instead of IP address
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# default value is false
# since V1.13
use_storage_id = false

# specify storage ids filename, can use relative or absolute path
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# since V1.13
storage_ids_filename = storage_ids.conf

# FastDFS tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
# valid only when load_fdfs_parameters_from_tracker is true
tracker_server=192.168.72.129:22122

# the port of the local storage server
# the default value is 23000
storage_server_port=23000

# the group name of the local storage server
group_name=group1

# if the url / uri including the group name
# set to false when uri like /M00/00/00/xxx
# set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx
# default value is false
url_have_group_name = true

# path(disk or mount point) count, default value is 1
# must same as storage.conf
store_path_count=1

# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
# must same as storage.conf
store_path0=/fastdfs/storage
#store_path1=/home/yuqing/fastdfs1

# standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info

# set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log
# empty for output to stderr (apache and nginx error_log file)
log_filename=

# response mode when the file not exist in the local file system
## proxy: get the content from other storage server, then send to client
## redirect: redirect to the original storage server (HTTP Header is Location)
response_mode=proxy

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# this paramter used to get all ip address of the local host
# default values is empty
if_alias_prefix=

# use "#include" directive to include HTTP config file
# NOTE: #include is an include directive, do NOT remove the # before include
#include http.conf


# if support flv
# default value is false
# since v1.15
flv_support = true

# flv file extension name
# default value is flv
# since v1.15
flv_extension = flv


# set the group count
# set to none zero to support multi-group on this storage server
# set to 0  for single group only
# groups settings section as [group1], [group2], ..., [groupN]
# default value is 0
# since v1.14
group_count = 0

# group settings for group #1
# since v1.14
# when support multi-group on this storage server, uncomment following section
#[group1]
#group_name=group1
#storage_server_port=23000
#store_path_count=2
#store_path0=/home/yuqing/fastdfs
#store_path1=/home/yuqing/fastdfs1

# group settings for group #2
# since v1.14
# when support multi-group, uncomment following section as neccessary
#[group2]
#group_name=group2
#storage_server_port=23000
#store_path_count=1
#store_path0=/home/yuqing/fastdfs

6. 编写 /usr/local/FastDFS/environment/entrypoint.sh 文件

1. 用来运行程序的命令

#!/bin/sh
/etc/init.d/fdfs_trackerd start
/etc/init.d/fdfs_storaged start
/usr/local/nginx/sbin/nginx -g 'daemon off;'
#ping baidu.com

7. 编写 /usr/local/FastDFS/environment/Dockerfile 文件

# 基础镜像
FROM ubuntu:xenial

# 更新数据源
WORKDIR /etc/apt
RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse' > sources.list
RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse' >> sources.list
RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse' >> sources.list
RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse' >> sources.list
RUN apt-get update

# 安装依赖
RUN apt-get install make gcc libpcre3-dev zlib1g-dev libevent-dev openssl libssl-dev --assume-yes
# 安装 ping 命令常占容器，方便进入最终
#RUN apt-get install iputils-ping --assume-yes

# 复制工具包
ADD fastdfs-6.06.tar.gz /usr/local/fastdfs
ADD fastdfs-nginx-module-1.22.tar.gz /usr/local/fastdfs
ADD libfastcommon-1.0.43.tar.gz /usr/local/fastdfs
ADD nginx-1.19.0.tar.gz /usr/local/fastdfs

# 安装 libfastcommon
WORKDIR /usr/local/fastdfs/libfastcommon-1.0.43
RUN ./make.sh && ./make.sh install

# 安装 FastDFS
WORKDIR /usr/local/fastdfs/fastdfs-6.06
RUN ./make.sh && ./make.sh install

# 配置 FastDFS 跟踪器
ADD tracker.conf /etc/fdfs
RUN mkdir -p /fastdfs/tracker

# 配置 FastDFS 存储
ADD storage.conf /etc/fdfs
RUN mkdir -p /fastdfs/storage

# FastDFS 与 Nginx 集成
WORKDIR /usr/local/fastdfs/nginx-1.19.0
RUN ./configure --add-module=/usr/local/fastdfs/fastdfs-nginx-module-1.22/src
RUN make && make install
ADD mod_fastdfs.conf /etc/fdfs

# 配置 Nginx
ADD nginx.conf /usr/local/nginx/conf

COPY entrypoint.sh /usr/local/bin/
RUN chmod +x /usr/local/bin/entrypoint.sh
ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]

WORKDIR /
EXPOSE 80
EXPOSE 22122
CMD ["/bin/bash"]

8. 编写 /usr/local/FastDFS/updateIp.py 初始化脚本

import os
import socket
from string import Template

ip = price_str = input("输入宿主机的IP地址：")
print(ip)

key = {'ip': ip, 'group_name': '${group_name}'}

modFile = open(os.getcwd() + '/environment/mod_fastdfs.conf', 'r')
modFileTem = Template(modFile.read())
modFastdfsResult = modFileTem.substitute(key)
modFastdfsWrite = open(os.getcwd() + '/environment/mod_fastdfs.conf', 'w+')
modFastdfsWrite.write(modFastdfsResult);
print("修改 /environment/mod_fastdfs.conf tracker_server 属性IP地址为=" + ip)

storageFile = open(os.getcwd() + '/environment/storage.conf', 'r')
storageFileTem = Template(storageFile.read())
storageFastdfsResult = storageFileTem.substitute(key)
storageFastdfsWrite = open(os.getcwd() + '/environment/storage.conf', 'w+')
storageFastdfsWrite.write(storageFastdfsResult);
print("修改 /environment/storage.conf tracker_server 属性IP地址为=" + ip)