光纤接口缩写及全称(zt)
今天看到接头光纤的种类，有ST FC SC LC MT—RJ，为了便于记忆想查一下他们的全称是啥？网上好容易查到了，竟然有这么多接口，顺便共享一下。
ST Straight Tip
FC Ferrul Connector
SC Subscriber Connector
LC LUCENT Connector
MT-RJ Mechanical Transfer Registred Jack
记忆方法
- LC接头有时候称为小(Little)接头。
- MT-RJ接头看起来像比较小的8P8C接头。
- ST接头可用"刺入及旋转"(Stab and Twist)来记忆，刺入及旋转就是它的连接方法(将线插入插座，然后旋转外面的卡榫将之锁住)。
- SC接头可用"方形接头"(Square Connector)来记忆，并且有人认为这才是它的正确名称，因为接头本身是方形的。另一记忆方法是(Stick and Click)。
- FC的金属接头对光纤芯提供良好的保护，但它是用旋转的方式，对光纤芯容易造成刮伤。
- SC接头提供良好的包装强度，而且它的先推后拉的连接方式让光纤芯在连接过程中比较有保护。
- LC接头主要应用企业网络环境中，用来取代SC接头的，它的尺寸比较小。它也常见于SFP。
- ST接头有卡榫避免接头损毁，类似BNC接头。
- 对于所有接头，在连接前先清洁有助于保护光纤芯断面不受异物刮伤，延长接头寿命，且避免断面因受污染而影响信号强度。
Fiber connector types
Short name Long form Coupling type Ferrule diameter Standard Typical applications Avio (Avim) Screw Aerospace and avionics ADT-UNI Screw 2.5 mm Measurement equipment Biconic Screw 2.5 mm Obsolete D4 Screw 2.0 mm Telecom in the 1970s and 1980s, obsolete Deutsch 1000 Screw Telecom, obsolete DIN (LSA) Screw IEC 61754-3 Telecom in Germany in 1990s; measurement equipment; obsolete DMI Clip 2.5 mm Printed circuit boards E-2000 (AKA LSH) Snap, with light and dust-cap 2.5 mm IEC 61754-15 Telecom, DWDM systems; EC push-pull type IEC 1754-8 Telecom & CATV networks ESCON Enterprise Systems Connection Snap (duplex) 2.5 mm IBM mainframe computers and peripherals F-3000 Snap, with light and dust-cap 1.25 mm IEC 61754-20 Fiber To The Home (LC Compatible) FC Ferrule Connector or Fiber Channel [1] Screw 2.5 mm IEC 61754-13 Datacom, telecom, measurement equipment, single mode lasers; becoming less common Fibergate Snap, with dust-cap 1.25 mm Backplane connector FSMA Screw 3.175 mm IEC 60874-2 Datacom, telecom, test and measurement LC Lucent Connector [1] orLocal Connector [citation needed] Snap 1.25 mm IEC 61754-20 High-density connections, SFP transceivers LuxCis 1.25 mm ARINC 801 PC or APC configurations (note 3) LX-5 Snap, with light- and dust-cap IEC 61754-23 High-density connections; rarely used MIC Media Interface Connector Snap 2.5 mm Fiber distributed data interface (FDDI) MPO / MTP Multiple-Fibre Push-On/Pull-off [1] Snap (multiplex push-pull coupling) 2.5×6.4 mm [2] IEC-61754-7; EIA/TIA-604-5 (FOCIS 5) SM or MM multi-fiber ribbon. Same ferrule as MT, but more easily reconnectable. [2] Used for indoor cabling and device interconnections. MTP is a brand name for an improved connector, which intermates with MPO. [3] MT Mechanical Transfer Snap (multiplex) 2.5×6.4 mm Pre-terminated cable assemblies; outdoor applications [2] MT-RJ Mechanical Transfer Registered Jack or Media Termination - recommended jack [1] Snap (duplex) 2.45×4.4 mm IEC 61754-18 Duplex multimode connections MU Miniature unit [1] Snap 1.25 mm IEC 61754-6 Common in Japan NEC D4 Screw 2.0 mm Common in Japan telecom in 1980s Opti-Jack Snap (duplex) OPTIMATE Screw Plastic fiber, obsolete SC Subscriber Connector [1] or
square connector [1] or
Standard Connector Snap (push-pull coupling) 2.5 mm IEC 61754-4 Datacom and telcom; extremely common SMA 905 Sub Miniature A Screw typ. 3.14 mm Industrial lasers, military; telecom multimode SMA 906 Sub Miniature A Screw Stepped; typ. 0.118", then .089" [citation needed] Industrial lasers, military; telecom multimode SMC Sub Miniature C Snap 2.5 mm ST / BFOC Straight Tip [1] / Bayonet Fiber Optic Connector Bayonet 2.5 mm IEC 61754-2 Multimode, rarely singlemode; APC not possible (note 3) TOSLINK Toshiba Link Snap Digital audio VF-45 Snap Datacom V-PIN V-System Snap (Duplex) Push-pull coupling Industrial and electric utility networking; multimode 200 μm, 400 μm, 1 mm, 2.2 mm fibers