newlib 中的 crt0 流程分析

最近对 newlib 中的启动代码 crt0 产生了兴趣,于是就分析了下其代码。crt0 的源码位于 libgloss/arm/crt0.S,为了兼容各种 ARM 架构,crt0.S 中有大量的条件判断宏定义,对于只关心 ARMv7e-M 的我来说很是痛苦。刚好手上有个基于 STM32F412 的 mbed 工程用的是 crt0 的启动方式,参考 crt0.o 的反汇编我可以提炼出 crt0.S 中和 ARMv7e-M 相关的部分代码。

crt0.o 的反汇编如下:

08008220 <_mainCRTStartup>:
 8008220:    4b15          ldr    r3, [pc, #84]    ; (8008278 <_mainCRTStartup+0x58>)
 8008222:    2b00          cmp    r3, #0
 8008224:    bf08          it    eq
 8008226:    4b13          ldreq    r3, [pc, #76]    ; (8008274 <_mainCRTStartup+0x54>)
 8008228:    469d          mov    sp, r3
 800822a:    f5a3 3a80     sub.w    sl, r3, #65536    ; 0x10000
 800822e:    2100          movs    r1, #0
 8008230:    468b          mov    fp, r1
 8008232:    460f          mov    r7, r1
 8008234:    4813          ldr    r0, [pc, #76]    ; (8008284 <_mainCRTStartup+0x64>)
 8008236:    4a14          ldr    r2, [pc, #80]    ; (8008288 <_mainCRTStartup+0x68>)
 8008238:    1a12          subs    r2, r2, r0
 800823a:    f01c fcd7     bl    8024bec 
 800823e:    4b0f          ldr    r3, [pc, #60]    ; (800827c <_mainCRTStartup+0x5c>)
 8008240:    2b00          cmp    r3, #0
 8008242:    d000          beq.n    8008246 <_mainCRTStartup+0x26>
 8008244:    4798          blx    r3
 8008246:    4b0e          ldr    r3, [pc, #56]    ; (8008280 <_mainCRTStartup+0x60>)
 8008248:    2b00          cmp    r3, #0
 800824a:    d000          beq.n    800824e <_mainCRTStartup+0x2e>
 800824c:    4798          blx    r3
 800824e:    2000          movs    r0, #0
 8008250:    2100          movs    r1, #0
 8008252:    0004          movs    r4, r0
 8008254:    000d          movs    r5, r1
 8008256:    480d          ldr    r0, [pc, #52]    ; (800828c <_mainCRTStartup+0x6c>)
 8008258:    2800          cmp    r0, #0
 800825a:    d002          beq.n    8008262 <_mainCRTStartup+0x42>
 800825c:    480c          ldr    r0, [pc, #48]    ; (8008290 <_mainCRTStartup+0x70>)
 800825e:    f00f f868     bl    8017332 <__wrap_atexit>
 8008262:    f01c f805     bl    8024270 <__libc_init_array>
 8008266:    0020          movs    r0, r4
 8008268:    0029          movs    r1, r5
 800826a:    f00f f821     bl    80172b0 <__wrap_main>
 800826e:    f00f f85d     bl    801732c <__wrap_exit>
 8008272:    bf00          nop
 8008274:    00080000     .word    0x00080000
 8008278:    20040000     .word    0x20040000
 800827c:    00000000     .word    0x00000000
 8008280:    080172a3     .word    0x080172a3
 8008284:    20000c00     .word    0x20000c00
 8008288:    2000ac58     .word    0x2000ac58
 800828c:    08017333     .word    0x08017333
 8008290:    00000000     .word    0x00000000

提炼后的 crt0.S 代码如下:

    FUNC_START  _mainCRTStartup
    FUNC_START  _start
/* Start by setting up a stack */

    /*  Set up the stack pointer to a fixed value */
    /*  Changes by toralf:
        - Allow linker script to provide stack via __stack symbol - see
          defintion of .Lstack
        - Provide "hooks" that may be used by the application to add
          custom init code - see .Lhwinit and .Lswinit  
        - Go through all execution modes and set up stack for each of them.
          Loosely based on init.s from ARM/Motorola example code.
              Note: Mode switch via CPSR is not allowed once in non-privileged
            mode, so we take care not to enter "User" to set up its sp,
            and also skip most operations if already in that mode. */

    ldr r3, .Lstack
    cmp r3, #0

    it  eq

    ldreq   r3, .LC0
    /* Note: This 'mov' is essential when starting in User, and ensures we
         always get *some* sp value for the initial mode, even if we 
         have somehow missed it below (in which case it gets the same
         value as FIQ - not ideal, but better than nothing.) */
    mov sp, r3

.LC23:
    /* Setup a default stack-limit in-case the code has been
       compiled with "-mapcs-stack-check".  Hard-wiring this value
       is not ideal, since there is currently no support for
       checking that the heap and stack have not collided, or that
       this default 64k is enough for the program being executed.
       However, it ensures that this simple crt0 world will not
       immediately cause an overflow event:  */
    sub sl, r3, #64 << 10   /* Still assumes 256bytes below sl */

    /* Zero the memory in the .bss section.  */
    movs    a2, #0          /* Second arg: fill value */
    mov fp, a2          /* Null frame pointer */
    mov r7, a2          /* Null frame pointer for Thumb */
    
    ldr a1, .LC1        /* First arg: start of memory block */
    ldr a3, .LC2    
    subs    a3, a3, a1      /* Third arg: length of block */
    
    bl  memset

/* Changes by toralf: Taken from libgloss/m68k/crt0.S
 * initialize target specific stuff. Only execute these
 * functions it they exist.
 */
    ldr r3, .Lhwinit
    cmp r3, #0
    beq .LC24
    indirect_call r3
.LC24:  
    ldr r3, .Lswinit
    cmp r3, #0
    beq .LC25
    indirect_call r3

.LC25:  
    movs    r0, #0      /*  no arguments  */
    movs    r1, #0      /*  no argv either */

    /* Some arm/elf targets use the .init and .fini sections
       to create constructors and destructors, and for these
       targets we need to call the _init function and arrange
       for _fini to be called at program exit.  */
    movs    r4, r0
    movs    r5, r1e

    /* Make reference to atexit weak to avoid unconditionally pulling in
       support code.  Refer to comments in __atexit.c for more details.  */
    ldr r0, .Latexit
    cmp r0, #0
    beq .Lweak_atexit

    ldr r0, .Lfini
    bl  atexit
.Lweak_atexit:
    bl  _init
    movs    r0, r4
    movs    r1, r5

    bl  main

    bl  exit        /* Should not return.  */
    
    /* For Thumb, constants must be after the code since only 
       positive offsets are supported for PC relative addresses.  */
.LC0:
    .word   0x80000         /* Top of RAM on the PIE board.  */
.Lstack:    
    .word   __stack
.Lhwinit:   
    .word   ardware_init_hook
.Lswinit:
    .word   software_init_hook

    /* Set up defaults for the above variables in the form of weak symbols
       - so that application will link correctly, and get value 0 in
       runtime (meaning "ignore setting") for the variables, when the user
       does not provide the symbols. (The linker uses a weak symbol if,
       and only if, a normal version of the same symbol isn't provided
       e.g. by a linker script or another object file.) */  

    .weak __stack
    .weak hardware_init_hook
    .weak software_init_hook

.LC1:
  .word __bss_start__
.LC2:
  .word __bss_end__

  .weak atexit
.Latexit:
  .word atexit

  /* Weak reference _fini in case of lite exit.  */
  .weak _fini
.Lfini:
  .word _fini

crt0 启动流程如下:

  1. 设置 SP 为 __stack,若 __stack 未被用户定义,则使用默认的值(0x80000处的值)。
  2. 清空 .bss 段,起始地址为 __bss_start__,结束地址为 __bss_end__ 。
  3. 若用户定义了 hardware_init_hook 和 software_init_hook ,则调用它们。
  4. 若用户定义了 atexit,则调用它,并将传递参数 _fini(_fini 被宏定义为 __libc_fini_array)。
  5. 调用 _init(_ini 被宏定义为 __libc_ini_array)。
  6. 调用 main(argc 和 argv 都等于 0)。
  7. 调用 exit。

其中 __stack,__bss_start__ 和 __bss_end__ 必须被定义。

hardware_init_hook 和 software_init_hook 可以实现一些需要在 main 之前的功能。

aiexit,exit,_init 和 _fini 一般是和 C++ 的全局构造和析构有关,这个放在下一节来分析。

转载于:https://www.cnblogs.com/swyang/p/6870226.html

你可能感兴趣的:(newlib 中的 crt0 流程分析)