单片机常用芯片系列（一）——TFTLCD-R61503B详解（1）——屏幕显示

采用8080通信模式，5个控制引脚，16根数据引脚。

此乃接口时序

一、底层时序

文件
tftlcd.c

开头定义

#include "tftlcd.h"
#include "font.h" 
#include "uart.h"
#include "stdlib.h"



//LCD的画笔颜色和背景色	   
u16 FRONT_COLOR=WHITE;	//画笔颜色
u16 BACK_COLOR=BLACK;  //背景色 

_tftlcd_data tftlcd_data; 

void Delay(unsigned int dly)
{
    unsigned int i,j;

    for(i=0;i<dly;i++)
    	for(j=0;j<255;j++);
}

写命令：

先把CS拉低，选中芯片，把数据准备好，再把RS拉低，选中写命令commend模式，再把RD置1，放入数据，WR置0，设置为写状态，再置1，结束写状态

void LCD_WriteCmd(u16 cmd)
{
#ifdef TFT22_R61503B
unsigned char cmdH, cmdL;
	cmdH = cmd >> 8;
	cmdL = cmd & 0x00FF;
	
	
	TFT_WR = 1;	 		  //初始化WR
	TFT_CS = 0;			  //打开片+选
	
	TFT_RD = 1;           //选择写
	TFT_RS = 0;			  //选择命令
	
	
	TFT_DATAPORTH = cmdH; //放置命令数据
	TFT_WR = 0;			  //写入时序
	
	TFT_WR = 1;
	TFT_DATAPORTH = cmdL;
	TFT_WR = 0;			  //写入时序
	TFT_WR = 1;
	
	TFT_CS = 1;			  //关闭片选 
#endif
}

写数据：

RS为高，其余一样

void LCD_WriteData(u16 dat)
{
	#ifdef TFT22_R61503B
	 unsigned char datH, datL;
	datH = dat >> 8;
	datL = dat & 0xFF;
	
	TFT_WR = 1;	 		  //初始化WR
	TFT_CS = 0;			  //打开片选
		
	TFT_RD = 1;           //选择写
	TFT_RS = 1;			  //选择发送数据
	

	TFT_DATAPORTH = datH;  //放置命令数据
	TFT_WR = 0;			  //写入时序
	TFT_WR = 1;

	TFT_DATAPORTH = datL;	

	TFT_WR = 0;			  //写入时序
	TFT_WR = 1;
	
	 TFT_CS = 1;			  //关闭片选
	#endif
}

写颜色

void LCD_WriteData_Color(u16 color)
{
#ifdef TFT22_R61503B
	 unsigned char datH, datL;
	datH = color >> 8;
	datL = color & 0xFF;
	
	TFT_WR = 1;	 		  //初始化WR
	TFT_CS = 0;			  //打开片选
		
	TFT_RD = 1;           //选择写
	TFT_RS = 1;			  //选择发送数据
	

	TFT_DATAPORTH = datH;  //放置命令数据
	TFT_WR = 0;			  //写入时序
	TFT_WR = 1;

	TFT_DATAPORTH = datL;	

	TFT_WR = 0;			  //写入时序
	TFT_WR = 1;
	
	 TFT_CS = 1;			  //关闭片选
	#endif
	}

写命令然后写数据

void LCD_WriteCmdData(u16 cmd,u16 dat)
{
	LCD_WriteCmd(cmd);
	LCD_WriteData(dat);
}

读数据

先把高八低八置一全部，然后RD为一，RS为0，读。读两次，存在ram变量里，将其返回。

u16 LCD_ReadData(void)
{
	u16 ram;

	TFT_DATAPORTH=0xff;
	TFT_DATAPORTL=0xff;

#ifdef TFT22_R61503B
	
	TFT_CS=0;
	TFT_RS=1;
	TFT_RD=0;
	_nop_();
 	ram=TFT_DATAPORTH;
 	ram<<=8;	

	TFT_RD=1;	
	TFT_RD=0;
	_nop_();
	ram|=TFT_DATAPORTH;
	TFT_RD=1;
 	TFT_CS=1;
	#endif
	return ram;	
}

设置屏幕方向

默认竖屏高为高，设置为横屏宽为高

void LCD_Display_Dir(u8 dir)
{
	
	if(dir==0)  //默认竖屏方向
	{
#ifdef TFT22_R61503B
		LCD_WriteCmdData(0x0001,0x0500); //Output Direct
		LCD_WriteCmdData(0x0003, 0x1030);   //设置彩屏显示方向的寄存器
#endif
		tftlcd_data.height=HEIGHT;
		tftlcd_data.width=WIDTH;

		tftlcd_data.dir=0;	
	}
	else
	{

#ifdef TFT22_R61503B
   		LCD_WriteCmdData(0x0001, 0x0400); //Output Direct
		LCD_WriteCmdData(0x0003, 0x1038);   //设置彩屏显示方向的寄存器#endif
#endif
	   	tftlcd_data.height=WIDTH;
		tftlcd_data.width=HEIGHT;

		tftlcd_data.dir=1;
	}
}

初始化函数

void TFTLCD_Init(void)
{
	TFT_RST=1;  
	delay_ms(100);
	
	TFT_RST=0;
	delay_ms(100);

	TFT_RST=1;
	delay_ms(100);

#ifdef TFT22_R61503B
	LCD_WriteCmd(0X0000);			   	
	tftlcd_data.id=LCD_ReadData(); 
#endif	

printf(" LCD ID:%x\r\n",tftlcd_data.id); //打印LCD ID

#ifdef TFT22_R61503B
	
	  LCD_WriteCmd(0x0000);LCD_WriteData(0x0001);
  delay_10us(10);
  LCD_WriteCmd(0x0007);LCD_WriteCmd(0x0000);
  LCD_WriteCmd(0x0012);LCD_WriteCmd(0x0000);
  LCD_WriteCmd(0x00a4);LCD_WriteCmd(0x0001);
  delay_10us(10);
  LCD_WriteCmd(0x0070);LCD_WriteData(0x9b00);
  LCD_WriteCmd(0x0007);LCD_WriteData(0x0031);
  LCD_WriteCmd(0x0018);LCD_WriteData(0x0001);
  
  LCD_WriteCmd(0x0010);LCD_WriteData(0x11b0); 
  LCD_WriteCmd(0x0011);LCD_WriteData(0x0007);        
  LCD_WriteCmd(0x0012);LCD_WriteData(0x1017);  
  LCD_WriteCmd(0x0013);LCD_WriteData(0x850d); 
  LCD_WriteCmd(0x0014);LCD_WriteData(0x8000); 
  LCD_WriteCmd(0x0012);LCD_WriteData(0x103c);  
  Delay(150);
  
  
  LCD_WriteCmd(0x0001);LCD_WriteData(0x0500);
  LCD_WriteCmd(0x0002);LCD_WriteData(0x0700);
  LCD_WriteCmd(0x0003);LCD_WriteData(0x1030);
  
  LCD_WriteCmd(0x0008);LCD_WriteData(0x0808);
  LCD_WriteCmd(0x000b);LCD_WriteData(0x1100);
  LCD_WriteCmd(0x000c);LCD_WriteData(0x0000);
  LCD_WriteCmd(0x000f);LCD_WriteData(0x1401);
  
  LCD_WriteCmd(0x0015);LCD_WriteData(0x0000);
  LCD_WriteCmd(0x0020);LCD_WriteData(0x0000);
  LCD_WriteCmd(0x0021);LCD_WriteData(0x0000);

//  LCD_WriteCmd(0x0030);LCD_WriteData(0x0f0f);
//  LCD_WriteCmd(0x0031);LCD_WriteData(0x0a0b);
//  LCD_WriteCmd(0x0032);LCD_WriteData(0x0c0e);
//  LCD_WriteCmd(0x0033);LCD_WriteData(0x0d0d);
//  LCD_WriteCmd(0x0034);LCD_WriteData(0x0a0a);
//  LCD_WriteCmd(0x0035);LCD_WriteData(0x0909);
//  LCD_WriteCmd(0x0036);LCD_WriteData(0x0c0c);
//  LCD_WriteCmd(0x0037);LCD_WriteData(0x0f0c);
//  LCD_WriteCmd(0x0038);LCD_WriteData(0x0606);
//  LCD_WriteCmd(0x0039);LCD_WriteData(0x0606);

  LCD_WriteCmd(0x0050);LCD_WriteData(0x0000);
  LCD_WriteCmd(0x0051);LCD_WriteData(0x00af);
  LCD_WriteCmd(0x0052);LCD_WriteData(0x0000);
  LCD_WriteCmd(0x0053);LCD_WriteData(0x00db);
  
  LCD_WriteCmd(0x0070);LCD_WriteData(0x1b00);
  LCD_WriteCmd(0x0071);LCD_WriteData(0x0000);
  
  LCD_WriteCmd(0x0090);LCD_WriteData(0x0000);
  LCD_WriteCmd(0x0091);LCD_WriteData(0x0100);
  LCD_WriteCmd(0x0092);LCD_WriteData(0x0001);
  LCD_WriteCmd(0x0059);LCD_WriteData(0x050c);
  LCD_WriteCmd(0x0090);LCD_WriteData(0x0010);
  LCD_WriteCmd(0x0092);LCD_WriteData(0x0600);

  LCD_WriteCmd(0x0007);LCD_WriteData(0x0233);
  Delay(50);
//  LCD_WriteCmd(0x0007);LCD_WriteData(0x0133);
//  Delay(50);

  LCD_WriteCmd(0x0022);
#endif	
	LCD_Display_Dir(TFTLCD_DIR);		//0：竖屏  1：横屏  默认竖屏
	LCD_Clear(BACK_COLOR);
}

设置窗口

//设置窗口,并自动设置画点坐标到窗口左上角(sx,sy).
//sx,sy:窗口起始坐标(左上角)
//width,height:窗口宽度和高度,必须大于0!!
//窗体大小:width*height. 

void LCD_Set_Window(u16 sx,u16 sy,u16 width,u16 height)
{
#ifdef TFT22_R61503B
if(tftlcd_data.dir==0)	
	{
		LCD_WriteCmd(0x0050);
		LCD_WriteData(sx);     	 
		LCD_WriteCmd(0x0051);
		LCD_WriteData(width);  
		LCD_WriteCmd(0x0052);
		LCD_WriteData(sy);
		LCD_WriteCmd(0x0053);
		LCD_WriteData(height);

		LCD_WriteCmd(0x0020);
		LCD_WriteData(sx);
		LCD_WriteCmd(0x0021);
		LCD_WriteData(sy);

		LCD_WriteCmd(0x0022);
	
	}
	else
	{
		LCD_WriteCmd(0x0052);
		LCD_WriteData(sx);     	 
		LCD_WriteCmd(0x0053);
		LCD_WriteData(width);  
		LCD_WriteCmd(0x0050);
		LCD_WriteData(sy);
		LCD_WriteCmd(0x0051);
		LCD_WriteData(height);

		LCD_WriteCmd(0x0021);
		LCD_WriteData(sx);
		LCD_WriteCmd(0x0020);
		LCD_WriteData(sy);

		LCD_WriteCmd(0x0022);
	}
	#endif
	}

读取个某点的颜色值

//读取个某点的颜色值	 
//x,y:坐标
//返回值:此点的颜色
u16 LCD_ReadPoint(u16 x,u16 y)
{
 u16 r=0,g=0x0001,b=0x0001,dat;
	if(x>=tftlcd_data.width||y>=tftlcd_data.height)
	return 0;	//超过了范围,直接返回		     
	LCD_Set_Window(x, y, x, y);
	
#ifdef TFT22_R61503B
	

	//LCD_Set_Window(x, y, x, y);
	dat=LCD_ReadData();  		//dummy Read
  	dat=LCD_ReadData();

	  //假设dat等于1101 0011 1100 1101
	b=dat>>11;			
//b=0000 0000 0001 1010
	g=(dat>>5)&0x003f;
//g= 0000 0110 1001 1110 & 0000 0000 0011 1111=
//0000 0000 0001 1110
	r=dat&0x001f;  
//r=1101 0011 1100 1101 & 0000 0000 0001 1111=
//0000 0000 0000 1101
	dat=(r<<11)|(g<<5)|(b); 
//dat=0110 1000 0000 0000 | 0000 0011 1100 0000 | 0000 0000 0001 1010
//dat=0110 1011 1101 1010  			
//此处应该是将bgr变为rgb，将r提前	    	   
	r=dat;
	#endif
	return r;
}

应用层

清屏函数

//清屏函数
//color:要清屏的填充色
void LCD_Clear(u16 color)
{
	u16 i=0, j=0 ;

	LCD_Set_Window(0, 0, tftlcd_data.width-1, tftlcd_data.height-1);	 //作用区域
  	for(i=0; i<tftlcd_data.width; i++)
	{
		for (j=0; j<tftlcd_data.height; j++)
		{
			LCD_WriteData_Color(color);
		}
	} 
}

在指定区域内填充单个颜色

//在指定区域内填充单个颜色
//(sx,sy),(ex,ey):填充矩形对角坐标,区域大小为:(ex-sx+1)*(ey-sy+1)   
//color:要填充的颜色
void LCD_Fill(u16 xState,u16 yState,u16 xEnd,u16 yEnd,u16 color)
{          
	u16 temp=0;

    if((xState > xEnd) || (yState > yEnd))
    {
        return;
    }   
	LCD_Set_Window(xState, yState, xEnd, yEnd); 
    xState = xEnd - xState + 1;
	yState = yEnd - yState + 1;

	while(xState--)
	{
	 	temp = yState;
		while (temp--)
	 	{			
			LCD_WriteData_Color(color);	
		}
	}	
} 

在指定区域内填充指定颜色块

//在指定区域内填充指定颜色块			 
//(sx,sy),(ex,ey):填充矩形对角坐标,区域大小为:(ex-sx+1)*(ey-sy+1)   
//color:要填充的颜色
void LCD_Color_Fill(u16 sx,u16 sy,u16 ex,u16 ey,u16 *color)
{  
	u16 height,width;
	u16 i,j;
	width=ex-sx+1; 			//得到填充的宽度
	height=ey-sy+1;			//高度
	LCD_Set_Window(sx, sy,ex, ey);
 	for(i=0;i<height;i++)
	{
		for(j=0;j<width;j++)
		{
			LCD_WriteData_Color(color[i*width+j]);
			//i等于0，引用的是第一行的，i等于1，引用第二行
		}
	}		    
}

画点

//x,y:坐标
//FRONT_COLOR:此点的颜色
void LCD_DrawPoint(u16 x,u16 y)
{
	LCD_Set_Window(x, y, x, y);  //设置点的位置
	LCD_WriteData_Color(FRONT_COLOR);	
}

快速画点

//快速画点
//x,y:坐标
//color:颜色
void LCD_DrawFRONT_COLOR(u16 x,u16 y,u16 color)
{	   
	LCD_Set_Window(x, y, x, y);
	LCD_WriteData_Color(color);	
} 

画一个大点

//画一个大点
//2*2的点			   
void LCD_DrawBigPoint(u16 x,u16 y,u16 color)
{	    
	LCD_DrawFRONT_COLOR(x,y,color);//中心点 
	LCD_DrawFRONT_COLOR(x+1,y,color);
	LCD_DrawFRONT_COLOR(x,y+1,color);
	LCD_DrawFRONT_COLOR(x+1,y+1,color);	 	  	
}

画线

//画线
//x1,y1:起点坐标
//x2,y2:终点坐标  
void LCD_DrawLine(u16 x1, u16 y1, u16 x2, u16 y2)
{
	u16 t=0; 
	int xerr=0,yerr=0,delta_x,delta_y,distance; 
	int incx,incy,uRow,uCol; 
	delta_x=x2-x1; //计算坐标增量 
	delta_y=y2-y1; //少加的那个1再后边的for循环里加进去了
	uRow=x1; //x轴
	uCol=y1; //y轴
	if(delta_x>0)incx=1; //设置单步方向，从左往右 
	else if(delta_x==0)incx=0;//垂直线 
	else {incx=-1;delta_x=-delta_x;} //从右往左
	if(delta_y>0)incy=1; //从上到下
	else if(delta_y==0)incy=0;//水平线 
	else{incy=-1;delta_y=-delta_y;} //从下到上
	if( delta_x>delta_y)distance=delta_x; //选取基本增量坐标轴 朝着x方向增长
	else distance=delta_y; 
	for(t=0;t<=distance+1;t++ )//画线输出 
	{  
//假设传进来的参数为void LCD_DrawLine(10, 10, 20,30)长方形
//所以delta_x=10,delta_y=20,distance=20,incx=1,incy=1
		LCD_DrawPoint(uRow,uCol);//画点 
	//void LCD_DrawLine_Color(u16 x1, u16 y1, u16 x2, u16 y2,u16 color)
	//{
	//。。。。
	//		LCD_DrawFRONT_COLOR(uRow,uCol,color);//画点 
	//。。。。
	//}
	//画彩色的线的时候，其余的一样，把画点的改成这个就行，其实就是把每个点设置了个颜色

		xerr+=delta_x ; 
		yerr+=delta_y ; 


		if(xerr>distance) 
		{ 
			xerr-=distance; 
			uRow+=incx; 
		} 
		if(yerr>distance) 
		{
			yerr-=distance; 
			uCol+=incy;
		} 
	}  
} 

这就是画直线的原理，非常巧妙的算法。给x和y每次加各自的长度，大于最长distance时就清零。
但是注意，他这个代码在第一个点处画了两回，因为是这样的，第一次开始，先画点，（10，10）处。加的时候x是10，y是20，然后开始第二次for循环，先画点，还是在（10，10）处又画了一次。
是这样的一个顺序执行。如果yend设置的过大，则会自动换行，就是在一个屏幕上出现好几条平行线。

画一个十字的标记

// 画一个十字的标记
// x：标记的X坐标
// y：标记的Y坐标
// color：标记的颜色
void LCD_DrowSign(u16 x, u16 y, u16 color)
{
    u8 i;

    /* 画点 */
    LCD_Set_Window(x-1, y-1, x+1, y+1);
    for(i=0; i<9; i++)
    {
		LCD_WriteData_Color(color);   
    }
//中心点如果画的太大就是一个方块，因为他把两边挡住了。
    /* 画横 */
    LCD_Set_Window(x-4, y, x+4, y);
    for(i=0; i<9; i++)
    {
		LCD_WriteData_Color(color); 
    }

    /* 画竖 */
    LCD_Set_Window(x, y-4, x, y+4);
    for(i=0; i<9; i++)
    {
		LCD_WriteData_Color(color); 
    }
}

画矩形

//(x1,y1),(x2,y2):矩形的对角坐标
void LCD_DrawRectangle(u16 x1, u16 y1, u16 x2, u16 y2)
{
	LCD_DrawLine(x1,y1,x2,y1);
	LCD_DrawLine(x1,y1,x1,y2);
	LCD_DrawLine(x1,y2,x2,y2);
	LCD_DrawLine(x2,y1,x2,y2);
}

画园

{
	int a,b;
	int di;
	a=0;b=r;	  
	di=3-(r<<1);             //判断下个点位置的标志
	while(a<=b)
	{
		LCD_DrawPoint(x0+a,y0-b);             //5
 		LCD_DrawPoint(x0+b,y0-a);             //0           
		LCD_DrawPoint(x0+b,y0+a);             //4               
		LCD_DrawPoint(x0+a,y0+b);             //6 
		LCD_DrawPoint(x0-a,y0+b);             //1       
 		LCD_DrawPoint(x0-b,y0+a);             
		LCD_DrawPoint(x0-a,y0-b);             //2             
  		LCD_DrawPoint(x0-b,y0-a);             //7     	         
		a++;
		//使用Bresenham算法画圆     
		if(di<0)di +=4*a+6;	  
		else
		{
			di+=10+4*(a-b);   
			b--;
		} 						    
	}
} 

在指定位置显示一个字符

//在指定位置显示一个字符
//x,y:起始坐标
//num:要显示的字符:" "--->"~"
//size:字体大小 12/16/24
//mode:叠加方式(1)还是非叠加方式(0)
void LCD_ShowChar(u16 x,u16 y,u8 num,u8 size,u8 mode)
{  							  
    u8 temp,t1,t;
	u16 y0=y;
	u8 csize=(size/8+((size%8)?1:0))*(size/2);		//得到字体一个字符对应点阵集所占的字节数	
	//（12/8+12%8）*12/2=（1+1）*6=12
	//12*12/8=18，16*16/8=32所以应该不是方块字，是长方形的字
	//16/8*16/2=2*8=16
 	num=num-' ';//得到偏移后的值（ASCII字库是从空格开始取模，所以-' '就是对应字符的字库）
	for(t=0;t<csize;t++)
	{   
		if(size==12)temp=ascii_1206[num][t]; 	 	//调用1206字体
		else if(size==16)temp=ascii_1608[num][t];	//调用1608字体
		else if(size==24)temp=ascii_2412[num][t];	//调用2412字体
		else return;								//没有的字库
		for(t1=0;t1<8;t1++)
		{			    //一个位一个位发
			if(temp&0x80)LCD_DrawFRONT_COLOR(x,y,FRONT_COLOR);
			else if(mode==0)LCD_DrawFRONT_COLOR(x,y,BACK_COLOR);
			temp<<=1;
			y++;
			if(y>=tftlcd_data.height)return;		//超区域了
			if((y-y0)==size)
			{
				y=y0;//从上到下八个一页，然后第二列。
				x++;
				if(x>=tftlcd_data.width)return;	//超区域了
				break;
			}
		}  	 
	}  	    	   	 	  
}  

出现溢出警告，右键target设置成这样即可。否则编译不通过

m^n函数

//m^n函数
//返回值:m^n次方.
u32 LCD_Pow(u8 m,u8 n)
{
	u32 result=1;	 
	while(n--)result*=m;    
	return result;
}	

显示数字

//显示数字,高位为0,则不显示
//x,y :起点坐标	 
//len :数字的位数
//size:字体大小
//color:颜色 
//num:数值(0~4294967295);	 
void LCD_ShowNum(u16 x,u16 y,u32 num,u8 len,u8 size)
{         	
	u8 t,temp;
	u8 enshow=0;						   
	for(t=0;t<len;t++)
	{
		//输入num=250，x=50，y=50，len=3，size=12；
		temp=(num/LCD_Pow(10,len-t-1))%10;
		//temp=250/10^2%10=2
		if(enshow==0&&t<(len-1))//0和1两次
//第一次的时候执行这个，如果是0就不显示，然后看第二位，如
//果第二位还是0就还不显示，一直到不为0，就把enshow变为1，告诉程序
//开始正常显示，高位0检测完毕
		{
			//1 temp=2,enshow=1,showchar(x,y,'2',12,0)
			//2 temp=5,enshow=1,showchar(x+6,y,'5',12,0)
		//3 temp=0, enshow=1,showchar(x+6,y,'0',12,0)
			if(temp==0)
			{
				LCD_ShowChar(x+(size/2)*t,y,' ',size,0);
				continue;
			}else enshow=1; 
		 	 
		}
	 	LCD_ShowChar(x+(size/2)*t,y,temp+'0',size,0); 
	}
} 

显示字符串

//显示字符串
//x,y:起点坐标
//width,height:区域大小  
//size:字体大小
//*p:字符串起始地址		  
void LCD_ShowString(u16 x,u16 y,u16 width,u16 height,u8 size,u8 *p)
{         
	u8 x0=x;
	width+=x;
	height+=y;
    while((*p<='~')&&(*p>=' '))//判断是不是非法字符!
    {       
        if(x>=width){x=x0;y+=size;}
        if(y>=height)break;//退出
        LCD_ShowChar(x,y,*p,size,0);
        x+=size/2;
        p++;
    }  
}

写二号楷体汉字

/****************************************************************************
*函数名：LCD_ShowFontHZ
*输  入：x：汉字显示的X坐标
*      * y：汉字显示的Y坐标
*      * cn：要显示的汉字
*      * wordColor：文字的颜色
*      * backColor：背景颜色
*输  出：
*功  能：写二号楷体汉字
****************************************************************************/
#if 1
void LCD_ShowFontHZ(u16 x, u16 y, u8 *cn)	 
{  
	u8 i, j, wordNum;
	u16 color;
	while (*cn != '\0')
	{
		LCD_Set_Window(x, y, x+31, y+28);
		for (wordNum=0; wordNum<20; wordNum++)
		{	//wordNum扫描字库的字数
			if ((CnChar32x29[wordNum].Index[0]==*cn)
			     &&(CnChar32x29[wordNum].Index[1]==*(cn+1)))
			{
				
				for(i=0; i<116; i++) 
				{	//MSK的位数
					color=CnChar32x29[wordNum].Msk[i];
					for(j=0;j<8;j++) 
					{
						if((color&0x80)==0x80)
						{
							LCD_WriteData_Color(FRONT_COLOR); 						
						} 						
						else
						{
							LCD_WriteData_Color(BACK_COLOR); 
						} 
						color<<=1;
					}//for(j=0;j<8;j++)结束
				}    
			}
		} //for (wordNum=0; wordNum<20; wordNum++)结束 	
		cn += 2;
		x += 32;
	}
}
#endif


#if 0
void LCD_ShowFontHZ(u16 x, u16 y, u8 *cn)
{
	u8 i, j, wordNum;
	u16 color;
	u16 x0=x; 
	u16 y0=y; 
	while (*cn != '\0')
	{
		for (wordNum=0; wordNum<20; wordNum++)
		{	//wordNum扫描字库的字数
			if ((CnChar32x29[wordNum].Index[0]==*cn)
			     &&(CnChar32x29[wordNum].Index[1]==*(cn+1)))
			{
				for(i=0; i<116; i++) 
				{	//MSK的位数
					color=CnChar32x29[wordNum].Msk[i];
					for(j=0;j<8;j++) 
					{
						if((color&0x80)==0x80)
						{
							LCD_DrawFRONT_COLOR(x,y,FRONT_COLOR);
						} 						
						else
						{
							LCD_DrawFRONT_COLOR(x,y,BACK_COLOR);
						} 
						color<<=1;
						x++;
						if((x-x0)==32)
						{
							x=x0;
							y++;
							if((y-y0)==29)
							{
								y=y0;
							}
						}
					}//for(j=0;j<8;j++)结束
				}	
			}
			
		} //for (wordNum=0; wordNum<20; wordNum++)结束 	
		cn += 2;
		x += 32;
		x0=x;
	}
}	
#endif

#if 1 ,#if 0 的作用
#if 后面的参数为真（非0）则执行#if 后面的模块
#if 后面的参数为假，则不执行#if 后面的模块
在调试的时候，有段代码自己不想删除，怕后面用到所以用 #if 0 来暂时注释掉，如果想用的话就 用#if 1 来开启；

#if 1
执行
#endif
#if 0
跳过
#endif

显示图片

void LCD_ShowPicture(u16 x, u16 y, u16 wide, u16 high,u8 *pic)
{
	u16 temp = 0;
	long tmp=0,num=0;
	LCD_Set_Window(x, y, x+wide-1, y+high-1);
	num = wide * high*2 ;
	do
	{  
		temp = pic[tmp + 1];
		temp = temp << 8;
		temp = temp | pic[tmp];
		LCD_WriteData_Color(temp);//逐点显示
		tmp += 2;
	}
	while(tmp < num);	
}

记得别太大，太大了放不下，最大64kb我的是。

main.c

#include "public.h"  
#include "tftlcd.h"


void main()
{
	//u16 i;
	TFTLCD_Init();
	LCD_Clear(BACK_COLOR);
	//LCD_Fill(0,0,999,999,RED);
	/*i=LCD_ReadPoint(10,10);
		LCD_Clear(BLUE);
	LCD_Clear(i);*/
//	LCD_DrawLine(10,10,20,30);
	//LCD_DrawLine_Color(0,0,200,1000,BLUE);
	//LCD_DrowSign(100,100,RED);
	
	//LCD_DrawRectangle(50, 50, 100,100);
//LCD_Draw_Circle(20,20,50);
	 //LCD_ShowChar(50,50,'a',12,0);
	//LCD_ShowNum(50,50,123456,4,12);
 //LCD_ShowString(50,50,50,50,12,"abcdefgasasasasasasasasasas");
//LCD_ShowFontHZ(50, 50, "普")	; 
 LCD_ShowPicture(50,50,70,100);

	while(1)
	{
		
	}					
}

tftlcd.h

#ifndef _tftlcd_H
#define _tftlcd_H

#include "public.h"
#define TFT22_R61503B
#define TFTLCD_DIR	0	//0：竖屏  1：横屏  默认竖屏	
//分辨率
#ifdef TFT22_R61503B
	#define	WIDTH	176
	#define	HEIGHT	220
#endif

//TFTLCD彩屏数据控制端口定义
#define TFT_DATAPORTH P1
#define TFT_DATAPORTL P0

sbit	TFT_CS  = P2^7;
sbit	TFT_RST = P3^3;
sbit	TFT_RS  = P2^6;
sbit	TFT_WR  = P2^5;
sbit	TFT_RD  = P3^2;

typedef struct  
{										    
	u16 width;			//LCD 宽度
	u16 height;			//LCD 高度
	u16 id;				//LCD ID
	u8  dir;            //LCD 方向
}_tftlcd_data;


//LCD参数
extern _tftlcd_data tftlcd_data;	//管理LCD重要参数
//LCD的前端颜色和背景色	   
extern u16  FRONT_COLOR;//前端颜色 默认红色    
extern u16  BACK_COLOR; //背景颜色.默认为白色


//画笔颜色
#define WHITE         	 0xFFFF
#define BLACK         	 0x0000	  
#define BLUE         	 0x001F
#define BRED             0XF81F
#define GRED 			 0XFFE0
#define GBLUE			 0X07FF
#define RED           	 0xF800
#define MAGENTA       	 0xF81F
#define GREEN         	 0x07E0
#define CYAN          	 0x7FFF
#define YELLOW        	 0xFFE0
#define BROWN 			 0XBC40 //棕色
#define BRRED 			 0XFC07 //棕红色
#define GRAY  			 0X8430 //灰色



void LCD_WriteCmd(u16 cmd);
void LCD_WriteData(u16 dat);
void LCD_WriteCmdData(u16 cmd,u16 dat);
void LCD_WriteData_Color(u16 color);
u16 LCD_ReadPoint(u16 x,u16 y);

void TFTLCD_Init(void);           //初始化
void LCD_Set_Window(u16 sx,u16 sy,u16 width,u16 height);
void LCD_Clear(u16 Color);	 												//清屏
void LCD_Fill(u16 xState,u16 yState,u16 xEnd,u16 yEnd,u16 color);
void LCD_DrawLine(u16 x1, u16 y1, u16 x2, u16 y2);
void LCD_DrawLine_Color(u16 x1, u16 y1, u16 x2, u16 y2,u16 color);
void LCD_DrawFRONT_COLOR(u16 x,u16 y,u16 color);
void LCD_DrowSign(u16 x, u16 y, u16 color);
void LCD_DrawRectangle(u16 x1, u16 y1, u16 x2, u16 y2);
void LCD_Draw_Circle(u16 x0,u16 y0,u8 r);
void LCD_ShowChar(u16 x,u16 y,u8 num,u8 size,u8 mode);
u32 LCD_Pow(u8 m,u8 n);
void LCD_ShowNum(u16 x,u16 y,u32 num,u8 len,u8 size);

void LCD_ShowString(u16 x,u16 y,u16 width,u16 height,u8 size,u8 *p);
void LCD_ShowFontHZ(u16 x, u16 y, u8 *cn)	 ;
void LCD_ShowPicture(u16 x, u16 y, u16 wide, u16 high);


#endif

public.h

#ifndef _public_H
#define _public_H

#include "reg52.h" 
#include "intrins.h"

typedef unsigned char u8;
typedef unsigned int u16;
typedef unsigned long u32;


typedef enum 
{
	DISABLE = 0, ENABLE = !DISABLE
}FunctionalState;


void delay_10us(u16 us);
void delay_ms(u16 ms);


#endif

public.c

#include "public.h"




void delay_10us(u16 us)
{
	while(us--);
}

void delay_ms(u16 ms)
{
	u16 i,j;
	for(i=ms;i>0;i--)
		for(j=110;j>0;j--);
}

font.h

#ifndef __FONT_H
#define __FONT_H 	   
//常用ASCII表
//偏移量32 
//ASCII字符集: !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
//PC2LCD2002取模方式设置：阴码+逐列式+顺向+C51格式
//总共：3个字符集（12*12、16*16和24*24），用户可以自行新增其他分辨率的字符集。
//每个字符所占用的字节数为:(size/8+((size%8)?1:0))*(size/2),其中size:是字库生成时的点阵大小(12/16/24...)
 
//12*12 ASCII字符集点阵
code const unsigned char ascii_1206[95][12]={
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
{0x00,0x00,0x00,0x00,0x3F,0x40,0x00,0x00,0x00,0x00,0x00,0x00},/*"!",1*/
{0x00,0x00,0x30,0x00,0x40,0x00,0x30,0x00,0x40,0x00,0x00,0x00},/*""",2*/
{0x09,0x00,0x0B,0xC0,0x3D,0x00,0x0B,0xC0,0x3D,0x00,0x09,0x00},/*"#",3*/
{0x18,0xC0,0x24,0x40,0x7F,0xE0,0x22,0x40,0x31,0x80,0x00,0x00},/*"$",4*/
{0x18,0x00,0x24,0xC0,0x1B,0x00,0x0D,0x80,0x32,0x40,0x01,0x80},/*"%",5*/
{0x03,0x80,0x1C,0x40,0x27,0x40,0x1C,0x80,0x07,0x40,0x00,0x40},/*"&",6*/
{0x10,0x00,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x80,0x20,0x40,0x40,0x20},/*"(",8*/
{0x00,0x00,0x40,0x20,0x20,0x40,0x1F,0x80,0x00,0x00,0x00,0x00},/*")",9*/
{0x09,0x00,0x06,0x00,0x1F,0x80,0x06,0x00,0x09,0x00,0x00,0x00},/*"*",10*/
{0x04,0x00,0x04,0x00,0x3F,0x80,0x04,0x00,0x04,0x00,0x00,0x00},/*"+",11*/
{0x00,0x10,0x00,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*",",12*/
{0x04,0x00,0x04,0x00,0x04,0x00,0x04,0x00,0x04,0x00,0x00,0x00},/*"-",13*/
{0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*".",14*/
{0x00,0x20,0x01,0xC0,0x06,0x00,0x38,0x00,0x40,0x00,0x00,0x00},/*"/",15*/
{0x1F,0x80,0x20,0x40,0x20,0x40,0x20,0x40,0x1F,0x80,0x00,0x00},/*"0",16*/
{0x00,0x00,0x10,0x40,0x3F,0xC0,0x00,0x40,0x00,0x00,0x00,0x00},/*"1",17*/
{0x18,0xC0,0x21,0x40,0x22,0x40,0x24,0x40,0x18,0x40,0x00,0x00},/*"2",18*/
{0x10,0x80,0x20,0x40,0x24,0x40,0x24,0x40,0x1B,0x80,0x00,0x00},/*"3",19*/
{0x02,0x00,0x0D,0x00,0x11,0x00,0x3F,0xC0,0x01,0x40,0x00,0x00},/*"4",20*/
{0x3C,0x80,0x24,0x40,0x24,0x40,0x24,0x40,0x23,0x80,0x00,0x00},/*"5",21*/
{0x1F,0x80,0x24,0x40,0x24,0x40,0x34,0x40,0x03,0x80,0x00,0x00},/*"6",22*/
{0x30,0x00,0x20,0x00,0x27,0xC0,0x38,0x00,0x20,0x00,0x00,0x00},/*"7",23*/
{0x1B,0x80,0x24,0x40,0x24,0x40,0x24,0x40,0x1B,0x80,0x00,0x00},/*"8",24*/
{0x1C,0x00,0x22,0xC0,0x22,0x40,0x22,0x40,0x1F,0x80,0x00,0x00},/*"9",25*/
{0x00,0x00,0x00,0x00,0x08,0x40,0x00,0x00,0x00,0x00,0x00,0x00},/*":",26*/
{0x00,0x00,0x00,0x00,0x04,0x60,0x00,0x00,0x00,0x00,0x00,0x00},/*";",27*/
{0x00,0x00,0x04,0x00,0x0A,0x00,0x11,0x00,0x20,0x80,0x40,0x40},/*"<",28*/
{0x09,0x00,0x09,0x00,0x09,0x00,0x09,0x00,0x09,0x00,0x00,0x00},/*"=",29*/
{0x00,0x00,0x40,0x40,0x20,0x80,0x11,0x00,0x0A,0x00,0x04,0x00},/*">",30*/
{0x18,0x00,0x20,0x00,0x23,0x40,0x24,0x00,0x18,0x00,0x00,0x00},/*"?",31*/
{0x1F,0x80,0x20,0x40,0x27,0x40,0x29,0x40,0x1F,0x40,0x00,0x00},/*"@",32*/
{0x00,0x40,0x07,0xC0,0x39,0x00,0x0F,0x00,0x01,0xC0,0x00,0x40},/*"A",33*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x24,0x40,0x1B,0x80,0x00,0x00},/*"B",34*/
{0x1F,0x80,0x20,0x40,0x20,0x40,0x20,0x40,0x30,0x80,0x00,0x00},/*"C",35*/
{0x20,0x40,0x3F,0xC0,0x20,0x40,0x20,0x40,0x1F,0x80,0x00,0x00},/*"D",36*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x2E,0x40,0x30,0xC0,0x00,0x00},/*"E",37*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x2E,0x00,0x30,0x00,0x00,0x00},/*"F",38*/
{0x0F,0x00,0x10,0x80,0x20,0x40,0x22,0x40,0x33,0x80,0x02,0x00},/*"G",39*/
{0x20,0x40,0x3F,0xC0,0x04,0x00,0x04,0x00,0x3F,0xC0,0x20,0x40},/*"H",40*/
{0x20,0x40,0x20,0x40,0x3F,0xC0,0x20,0x40,0x20,0x40,0x00,0x00},/*"I",41*/
{0x00,0x60,0x20,0x20,0x20,0x20,0x3F,0xC0,0x20,0x00,0x20,0x00},/*"J",42*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x0B,0x00,0x30,0xC0,0x20,0x40},/*"K",43*/
{0x20,0x40,0x3F,0xC0,0x20,0x40,0x00,0x40,0x00,0x40,0x00,0xC0},/*"L",44*/
{0x3F,0xC0,0x3C,0x00,0x03,0xC0,0x3C,0x00,0x3F,0xC0,0x00,0x00},/*"M",45*/
{0x20,0x40,0x3F,0xC0,0x0C,0x40,0x23,0x00,0x3F,0xC0,0x20,0x00},/*"N",46*/
{0x1F,0x80,0x20,0x40,0x20,0x40,0x20,0x40,0x1F,0x80,0x00,0x00},/*"O",47*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x24,0x00,0x18,0x00,0x00,0x00},/*"P",48*/
{0x1F,0x80,0x21,0x40,0x21,0x40,0x20,0xE0,0x1F,0xA0,0x00,0x00},/*"Q",49*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x26,0x00,0x19,0xC0,0x00,0x40},/*"R",50*/
{0x18,0xC0,0x24,0x40,0x24,0x40,0x22,0x40,0x31,0x80,0x00,0x00},/*"S",51*/
{0x30,0x00,0x20,0x40,0x3F,0xC0,0x20,0x40,0x30,0x00,0x00,0x00},/*"T",52*/
{0x20,0x00,0x3F,0x80,0x00,0x40,0x00,0x40,0x3F,0x80,0x20,0x00},/*"U",53*/
{0x20,0x00,0x3E,0x00,0x01,0xC0,0x07,0x00,0x38,0x00,0x20,0x00},/*"V",54*/
{0x38,0x00,0x07,0xC0,0x3C,0x00,0x07,0xC0,0x38,0x00,0x00,0x00},/*"W",55*/
{0x20,0x40,0x39,0xC0,0x06,0x00,0x39,0xC0,0x20,0x40,0x00,0x00},/*"X",56*/
{0x20,0x00,0x38,0x40,0x07,0xC0,0x38,0x40,0x20,0x00,0x00,0x00},/*"Y",57*/
{0x30,0x40,0x21,0xC0,0x26,0x40,0x38,0x40,0x20,0xC0,0x00,0x00},/*"Z",58*/
{0x00,0x00,0x00,0x00,0x7F,0xE0,0x40,0x20,0x40,0x20,0x00,0x00},/*"[",59*/
{0x00,0x00,0x70,0x00,0x0C,0x00,0x03,0x80,0x00,0x40,0x00,0x00},/*"\",60*/
{0x00,0x00,0x40,0x20,0x40,0x20,0x7F,0xE0,0x00,0x00,0x00,0x00},/*"]",61*/
{0x00,0x00,0x20,0x00,0x40,0x00,0x20,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
{0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10},/*"_",63*/
{0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
{0x00,0x00,0x02,0x80,0x05,0x40,0x05,0x40,0x03,0xC0,0x00,0x40},/*"a",65*/
{0x20,0x00,0x3F,0xC0,0x04,0x40,0x04,0x40,0x03,0x80,0x00,0x00},/*"b",66*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x04,0x40,0x06,0x40,0x00,0x00},/*"c",67*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x24,0x40,0x3F,0xC0,0x00,0x40},/*"d",68*/
{0x00,0x00,0x03,0x80,0x05,0x40,0x05,0x40,0x03,0x40,0x00,0x00},/*"e",69*/
{0x00,0x00,0x04,0x40,0x1F,0xC0,0x24,0x40,0x24,0x40,0x20,0x00},/*"f",70*/
{0x00,0x00,0x02,0xE0,0x05,0x50,0x05,0x50,0x06,0x50,0x04,0x20},/*"g",71*/
{0x20,0x40,0x3F,0xC0,0x04,0x40,0x04,0x00,0x03,0xC0,0x00,0x40},/*"h",72*/
{0x00,0x00,0x04,0x40,0x27,0xC0,0x00,0x40,0x00,0x00,0x00,0x00},/*"i",73*/
{0x00,0x10,0x00,0x10,0x04,0x10,0x27,0xE0,0x00,0x00,0x00,0x00},/*"j",74*/
{0x20,0x40,0x3F,0xC0,0x01,0x40,0x07,0x00,0x04,0xC0,0x04,0x40},/*"k",75*/
{0x20,0x40,0x20,0x40,0x3F,0xC0,0x00,0x40,0x00,0x40,0x00,0x00},/*"l",76*/
{0x07,0xC0,0x04,0x00,0x07,0xC0,0x04,0x00,0x03,0xC0,0x00,0x00},/*"m",77*/
{0x04,0x40,0x07,0xC0,0x04,0x40,0x04,0x00,0x03,0xC0,0x00,0x40},/*"n",78*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x04,0x40,0x03,0x80,0x00,0x00},/*"o",79*/
{0x04,0x10,0x07,0xF0,0x04,0x50,0x04,0x40,0x03,0x80,0x00,0x00},/*"p",80*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x04,0x50,0x07,0xF0,0x00,0x10},/*"q",81*/
{0x04,0x40,0x07,0xC0,0x02,0x40,0x04,0x00,0x04,0x00,0x00,0x00},/*"r",82*/
{0x00,0x00,0x06,0x40,0x05,0x40,0x05,0x40,0x04,0xC0,0x00,0x00},/*"s",83*/
{0x00,0x00,0x04,0x00,0x1F,0x80,0x04,0x40,0x00,0x40,0x00,0x00},/*"t",84*/
{0x04,0x00,0x07,0x80,0x00,0x40,0x04,0x40,0x07,0xC0,0x00,0x40},/*"u",85*/
{0x04,0x00,0x07,0x00,0x04,0xC0,0x01,0x80,0x06,0x00,0x04,0x00},/*"v",86*/
{0x06,0x00,0x01,0xC0,0x07,0x00,0x01,0xC0,0x06,0x00,0x00,0x00},/*"w",87*/
{0x04,0x40,0x06,0xC0,0x01,0x00,0x06,0xC0,0x04,0x40,0x00,0x00},/*"x",88*/
{0x04,0x10,0x07,0x10,0x04,0xE0,0x01,0x80,0x06,0x00,0x04,0x00},/*"y",89*/
{0x00,0x00,0x04,0x40,0x05,0xC0,0x06,0x40,0x04,0x40,0x00,0x00},/*"z",90*/
{0x00,0x00,0x00,0x00,0x04,0x00,0x7B,0xE0,0x40,0x20,0x00,0x00},/*"{",91*/
{0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00},/*"|",92*/
{0x00,0x00,0x40,0x20,0x7B,0xE0,0x04,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
{0x40,0x00,0x80,0x00,0x40,0x00,0x20,0x00,0x20,0x00,0x40,0x00},/*"~",94*/
};  
//16*16 ASCII字符集点阵
code const unsigned char ascii_1608[95][16]={	  
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xCC,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00},/*"!",1*/
{0x00,0x00,0x08,0x00,0x30,0x00,0x60,0x00,0x08,0x00,0x30,0x00,0x60,0x00,0x00,0x00},/*""",2*/
{0x02,0x20,0x03,0xFC,0x1E,0x20,0x02,0x20,0x03,0xFC,0x1E,0x20,0x02,0x20,0x00,0x00},/*"#",3*/
{0x00,0x00,0x0E,0x18,0x11,0x04,0x3F,0xFF,0x10,0x84,0x0C,0x78,0x00,0x00,0x00,0x00},/*"$",4*/
{0x0F,0x00,0x10,0x84,0x0F,0x38,0x00,0xC0,0x07,0x78,0x18,0x84,0x00,0x78,0x00,0x00},/*"%",5*/
{0x00,0x78,0x0F,0x84,0x10,0xC4,0x11,0x24,0x0E,0x98,0x00,0xE4,0x00,0x84,0x00,0x08},/*"&",6*/
{0x08,0x00,0x68,0x00,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xE0,0x18,0x18,0x20,0x04,0x40,0x02,0x00,0x00},/*"(",8*/
{0x00,0x00,0x40,0x02,0x20,0x04,0x18,0x18,0x07,0xE0,0x00,0x00,0x00,0x00,0x00,0x00},/*")",9*/
{0x02,0x40,0x02,0x40,0x01,0x80,0x0F,0xF0,0x01,0x80,0x02,0x40,0x02,0x40,0x00,0x00},/*"*",10*/
{0x00,0x80,0x00,0x80,0x00,0x80,0x0F,0xF8,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x00},/*"+",11*/
{0x00,0x01,0x00,0x0D,0x00,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*",",12*/
{0x00,0x00,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80},/*"-",13*/
{0x00,0x00,0x00,0x0C,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*".",14*/
{0x00,0x00,0x00,0x06,0x00,0x18,0x00,0x60,0x01,0x80,0x06,0x00,0x18,0x00,0x20,0x00},/*"/",15*/
{0x00,0x00,0x07,0xF0,0x08,0x08,0x10,0x04,0x10,0x04,0x08,0x08,0x07,0xF0,0x00,0x00},/*"0",16*/
{0x00,0x00,0x08,0x04,0x08,0x04,0x1F,0xFC,0x00,0x04,0x00,0x04,0x00,0x00,0x00,0x00},/*"1",17*/
{0x00,0x00,0x0E,0x0C,0x10,0x14,0x10,0x24,0x10,0x44,0x11,0x84,0x0E,0x0C,0x00,0x00},/*"2",18*/
{0x00,0x00,0x0C,0x18,0x10,0x04,0x11,0x04,0x11,0x04,0x12,0x88,0x0C,0x70,0x00,0x00},/*"3",19*/
{0x00,0x00,0x00,0xE0,0x03,0x20,0x04,0x24,0x08,0x24,0x1F,0xFC,0x00,0x24,0x00,0x00},/*"4",20*/
{0x00,0x00,0x1F,0x98,0x10,0x84,0x11,0x04,0x11,0x04,0x10,0x88,0x10,0x70,0x00,0x00},/*"5",21*/
{0x00,0x00,0x07,0xF0,0x08,0x88,0x11,0x04,0x11,0x04,0x18,0x88,0x00,0x70,0x00,0x00},/*"6",22*/
{0x00,0x00,0x1C,0x00,0x10,0x00,0x10,0xFC,0x13,0x00,0x1C,0x00,0x10,0x00,0x00,0x00},/*"7",23*/
{0x00,0x00,0x0E,0x38,0x11,0x44,0x10,0x84,0x10,0x84,0x11,0x44,0x0E,0x38,0x00,0x00},/*"8",24*/
{0x00,0x00,0x07,0x00,0x08,0x8C,0x10,0x44,0x10,0x44,0x08,0x88,0x07,0xF0,0x00,0x00},/*"9",25*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0C,0x03,0x0C,0x00,0x00,0x00,0x00,0x00,0x00},/*":",26*/
{0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*";",27*/
{0x00,0x00,0x00,0x80,0x01,0x40,0x02,0x20,0x04,0x10,0x08,0x08,0x10,0x04,0x00,0x00},/*"<",28*/
{0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x00,0x00},/*"=",29*/
{0x00,0x00,0x10,0x04,0x08,0x08,0x04,0x10,0x02,0x20,0x01,0x40,0x00,0x80,0x00,0x00},/*">",30*/
{0x00,0x00,0x0E,0x00,0x12,0x00,0x10,0x0C,0x10,0x6C,0x10,0x80,0x0F,0x00,0x00,0x00},/*"?",31*/
{0x03,0xE0,0x0C,0x18,0x13,0xE4,0x14,0x24,0x17,0xC4,0x08,0x28,0x07,0xD0,0x00,0x00},/*"@",32*/
{0x00,0x04,0x00,0x3C,0x03,0xC4,0x1C,0x40,0x07,0x40,0x00,0xE4,0x00,0x1C,0x00,0x04},/*"A",33*/
{0x10,0x04,0x1F,0xFC,0x11,0x04,0x11,0x04,0x11,0x04,0x0E,0x88,0x00,0x70,0x00,0x00},/*"B",34*/
{0x03,0xE0,0x0C,0x18,0x10,0x04,0x10,0x04,0x10,0x04,0x10,0x08,0x1C,0x10,0x00,0x00},/*"C",35*/
{0x10,0x04,0x1F,0xFC,0x10,0x04,0x10,0x04,0x10,0x04,0x08,0x08,0x07,0xF0,0x00,0x00},/*"D",36*/
{0x10,0x04,0x1F,0xFC,0x11,0x04,0x11,0x04,0x17,0xC4,0x10,0x04,0x08,0x18,0x00,0x00},/*"E",37*/
{0x10,0x04,0x1F,0xFC,0x11,0x04,0x11,0x00,0x17,0xC0,0x10,0x00,0x08,0x00,0x00,0x00},/*"F",38*/
{0x03,0xE0,0x0C,0x18,0x10,0x04,0x10,0x04,0x10,0x44,0x1C,0x78,0x00,0x40,0x00,0x00},/*"G",39*/
{0x10,0x04,0x1F,0xFC,0x10,0x84,0x00,0x80,0x00,0x80,0x10,0x84,0x1F,0xFC,0x10,0x04},/*"H",40*/
{0x00,0x00,0x10,0x04,0x10,0x04,0x1F,0xFC,0x10,0x04,0x10,0x04,0x00,0x00,0x00,0x00},/*"I",41*/
{0x00,0x03,0x00,0x01,0x10,0x01,0x10,0x01,0x1F,0xFE,0x10,0x00,0x10,0x00,0x00,0x00},/*"J",42*/
{0x10,0x04,0x1F,0xFC,0x11,0x04,0x03,0x80,0x14,0x64,0x18,0x1C,0x10,0x04,0x00,0x00},/*"K",43*/
{0x10,0x04,0x1F,0xFC,0x10,0x04,0x00,0x04,0x00,0x04,0x00,0x04,0x00,0x0C,0x00,0x00},/*"L",44*/
{0x10,0x04,0x1F,0xFC,0x1F,0x00,0x00,0xFC,0x1F,0x00,0x1F,0xFC,0x10,0x04,0x00,0x00},/*"M",45*/
{0x10,0x04,0x1F,0xFC,0x0C,0x04,0x03,0x00,0x00,0xE0,0x10,0x18,0x1F,0xFC,0x10,0x00},/*"N",46*/
{0x07,0xF0,0x08,0x08,0x10,0x04,0x10,0x04,0x10,0x04,0x08,0x08,0x07,0xF0,0x00,0x00},/*"O",47*/
{0x10,0x04,0x1F,0xFC,0x10,0x84,0x10,0x80,0x10,0x80,0x10,0x80,0x0F,0x00,0x00,0x00},/*"P",48*/
{0x07,0xF0,0x08,0x18,0x10,0x24,0x10,0x24,0x10,0x1C,0x08,0x0A,0x07,0xF2,0x00,0x00},/*"Q",49*/
{0x10,0x04,0x1F,0xFC,0x11,0x04,0x11,0x00,0x11,0xC0,0x11,0x30,0x0E,0x0C,0x00,0x04},/*"R",50*/
{0x00,0x00,0x0E,0x1C,0x11,0x04,0x10,0x84,0x10,0x84,0x10,0x44,0x1C,0x38,0x00,0x00},/*"S",51*/
{0x18,0x00,0x10,0x00,0x10,0x04,0x1F,0xFC,0x10,0x04,0x10,0x00,0x18,0x00,0x00,0x00},/*"T",52*/
{0x10,0x00,0x1F,0xF8,0x10,0x04,0x00,0x04,0x00,0x04,0x10,0x04,0x1F,0xF8,0x10,0x00},/*"U",53*/
{0x10,0x00,0x1E,0x00,0x11,0xE0,0x00,0x1C,0x00,0x70,0x13,0x80,0x1C,0x00,0x10,0x00},/*"V",54*/
{0x1F,0xC0,0x10,0x3C,0x00,0xE0,0x1F,0x00,0x00,0xE0,0x10,0x3C,0x1F,0xC0,0x00,0x00},/*"W",55*/
{0x10,0x04,0x18,0x0C,0x16,0x34,0x01,0xC0,0x01,0xC0,0x16,0x34,0x18,0x0C,0x10,0x04},/*"X",56*/
{0x10,0x00,0x1C,0x00,0x13,0x04,0x00,0xFC,0x13,0x04,0x1C,0x00,0x10,0x00,0x00,0x00},/*"Y",57*/
{0x08,0x04,0x10,0x1C,0x10,0x64,0x10,0x84,0x13,0x04,0x1C,0x04,0x10,0x18,0x00,0x00},/*"Z",58*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFE,0x40,0x02,0x40,0x02,0x40,0x02,0x00,0x00},/*"[",59*/
{0x00,0x00,0x30,0x00,0x0C,0x00,0x03,0x80,0x00,0x60,0x00,0x1C,0x00,0x03,0x00,0x00},/*"\",60*/
{0x00,0x00,0x40,0x02,0x40,0x02,0x40,0x02,0x7F,0xFE,0x00,0x00,0x00,0x00,0x00,0x00},/*"]",61*/
{0x00,0x00,0x00,0x00,0x20,0x00,0x40,0x00,0x40,0x00,0x40,0x00,0x20,0x00,0x00,0x00},/*"^",62*/
{0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01},/*"_",63*/
{0x00,0x00,0x40,0x00,0x40,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
{0x00,0x00,0x00,0x98,0x01,0x24,0x01,0x44,0x01,0x44,0x01,0x44,0x00,0xFC,0x00,0x04},/*"a",65*/
{0x10,0x00,0x1F,0xFC,0x00,0x88,0x01,0x04,0x01,0x04,0x00,0x88,0x00,0x70,0x00,0x00},/*"b",66*/
{0x00,0x00,0x00,0x70,0x00,0x88,0x01,0x04,0x01,0x04,0x01,0x04,0x00,0x88,0x00,0x00},/*"c",67*/
{0x00,0x00,0x00,0x70,0x00,0x88,0x01,0x04,0x01,0x04,0x11,0x08,0x1F,0xFC,0x00,0x04},/*"d",68*/
{0x00,0x00,0x00,0xF8,0x01,0x44,0x01,0x44,0x01,0x44,0x01,0x44,0x00,0xC8,0x00,0x00},/*"e",69*/
{0x00,0x00,0x01,0x04,0x01,0x04,0x0F,0xFC,0x11,0x04,0x11,0x04,0x11,0x00,0x18,0x00},/*"f",70*/
{0x00,0x00,0x00,0xD6,0x01,0x29,0x01,0x29,0x01,0x29,0x01,0xC9,0x01,0x06,0x00,0x00},/*"g",71*/
{0x10,0x04,0x1F,0xFC,0x00,0x84,0x01,0x00,0x01,0x00,0x01,0x04,0x00,0xFC,0x00,0x04},/*"h",72*/
{0x00,0x00,0x01,0x04,0x19,0x04,0x19,0xFC,0x00,0x04,0x00,0x04,0x00,0x00,0x00,0x00},/*"i",73*/
{0x00,0x00,0x00,0x03,0x00,0x01,0x01,0x01,0x19,0x01,0x19,0xFE,0x00,0x00,0x00,0x00},/*"j",74*/
{0x10,0x04,0x1F,0xFC,0x00,0x24,0x00,0x40,0x01,0xB4,0x01,0x0C,0x01,0x04,0x00,0x00},/*"k",75*/
{0x00,0x00,0x10,0x04,0x10,0x04,0x1F,0xFC,0x00,0x04,0x00,0x04,0x00,0x00,0x00,0x00},/*"l",76*/
{0x01,0x04,0x01,0xFC,0x01,0x04,0x01,0x00,0x01,0xFC,0x01,0x04,0x01,0x00,0x00,0xFC},/*"m",77*/
{0x01,0x04,0x01,0xFC,0x00,0x84,0x01,0x00,0x01,0x00,0x01,0x04,0x00,0xFC,0x00,0x04},/*"n",78*/
{0x00,0x00,0x00,0xF8,0x01,0x04,0x01,0x04,0x01,0x04,0x01,0x04,0x00,0xF8,0x00,0x00},/*"o",79*/
{0x01,0x01,0x01,0xFF,0x00,0x85,0x01,0x04,0x01,0x04,0x00,0x88,0x00,0x70,0x00,0x00},/*"p",80*/
{0x00,0x00,0x00,0x70,0x00,0x88,0x01,0x04,0x01,0x04,0x01,0x05,0x01,0xFF,0x00,0x01},/*"q",81*/
{0x01,0x04,0x01,0x04,0x01,0xFC,0x00,0x84,0x01,0x04,0x01,0x00,0x01,0x80,0x00,0x00},/*"r",82*/
{0x00,0x00,0x00,0xCC,0x01,0x24,0x01,0x24,0x01,0x24,0x01,0x24,0x01,0x98,0x00,0x00},/*"s",83*/
{0x00,0x00,0x01,0x00,0x01,0x00,0x07,0xF8,0x01,0x04,0x01,0x04,0x00,0x00,0x00,0x00},/*"t",84*/
{0x01,0x00,0x01,0xF8,0x00,0x04,0x00,0x04,0x00,0x04,0x01,0x08,0x01,0xFC,0x00,0x04},/*"u",85*/
{0x01,0x00,0x01,0x80,0x01,0x70,0x00,0x0C,0x00,0x10,0x01,0x60,0x01,0x80,0x01,0x00},/*"v",86*/
{0x01,0xF0,0x01,0x0C,0x00,0x30,0x01,0xC0,0x00,0x30,0x01,0x0C,0x01,0xF0,0x01,0x00},/*"w",87*/
{0x00,0x00,0x01,0x04,0x01,0x8C,0x00,0x74,0x01,0x70,0x01,0x8C,0x01,0x04,0x00,0x00},/*"x",88*/
{0x01,0x01,0x01,0x81,0x01,0x71,0x00,0x0E,0x00,0x18,0x01,0x60,0x01,0x80,0x01,0x00},/*"y",89*/
{0x00,0x00,0x01,0x84,0x01,0x0C,0x01,0x34,0x01,0x44,0x01,0x84,0x01,0x0C,0x00,0x00},/*"z",90*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x3E,0xFC,0x40,0x02,0x40,0x02},/*"{",91*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00},/*"|",92*/
{0x00,0x00,0x40,0x02,0x40,0x02,0x3E,0xFC,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
{0x00,0x00,0x60,0x00,0x80,0x00,0x80,0x00,0x40,0x00,0x40,0x00,0x20,0x00,0x20,0x00},/*"~",94*/
};  
//24*24 ASICII字符集点阵
code const unsigned char ascii_2412[95][36]={	  
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x80,0x38,0x0F,0xFE,0x38,0x0F,0x80,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"!",1*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x06,0x00,0x00,0x0C,0x00,0x00,0x38,0x00,0x00,0x31,0x00,0x00,0x06,0x00,0x00,0x0C,0x00,0x00,0x38,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00},/*""",2*/
{0x00,0x00,0x00,0x00,0x61,0x80,0x00,0x67,0xF8,0x07,0xF9,0x80,0x00,0x61,0x80,0x00,0x61,0x80,0x00,0x61,0x80,0x00,0x61,0x80,0x00,0x67,0xF8,0x07,0xF9,0x80,0x00,0x61,0x80,0x00,0x00,0x00},/*"#",3*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xC0,0xE0,0x03,0xE0,0xF0,0x06,0x30,0x08,0x04,0x18,0x08,0x1F,0xFF,0xFE,0x04,0x0E,0x08,0x07,0x87,0xF0,0x03,0x81,0xE0,0x00,0x00,0x00,0x00,0x00,0x00},/*"$",4*/
{0x01,0xF0,0x00,0x06,0x0C,0x00,0x04,0x04,0x08,0x06,0x0C,0x70,0x01,0xF9,0xC0,0x00,0x0E,0x00,0x00,0x3B,0xE0,0x00,0xEC,0x18,0x07,0x08,0x08,0x04,0x0C,0x18,0x00,0x03,0xE0,0x00,0x00,0x00},/*"%",5*/
{0x00,0x01,0xE0,0x00,0x07,0xF0,0x03,0xF8,0x18,0x04,0x1C,0x08,0x04,0x17,0x08,0x07,0xE1,0xD0,0x03,0xC0,0xE0,0x00,0x23,0xB0,0x00,0x3C,0x08,0x00,0x20,0x08,0x00,0x00,0x10,0x00,0x00,0x00},/*"&",6*/
{0x00,0x00,0x00,0x01,0x00,0x00,0x31,0x00,0x00,0x32,0x00,0x00,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x01,0xFF,0xC0,0x07,0x80,0xF0,0x0C,0x00,0x18,0x10,0x00,0x04,0x20,0x00,0x02,0x00,0x00,0x00},/*"(",8*/
{0x00,0x00,0x00,0x20,0x00,0x02,0x10,0x00,0x04,0x0C,0x00,0x18,0x07,0x80,0xF0,0x01,0xFF,0xC0,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*")",9*/
{0x00,0x00,0x00,0x00,0x42,0x00,0x00,0x66,0x00,0x00,0x66,0x00,0x00,0x3C,0x00,0x00,0x18,0x00,0x03,0xFF,0xC0,0x00,0x18,0x00,0x00,0x3C,0x00,0x00,0x66,0x00,0x00,0x66,0x00,0x00,0x42,0x00},/*"*",10*/
{0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x01,0xFF,0xC0,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00},/*"+",11*/
{0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x31,0x00,0x00,0x32,0x00,0x00,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*",",12*/
{0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x00,0x00},/*"-",13*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x00,0x38,0x00,0x00,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*".",14*/
{0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x1C,0x00,0x00,0x70,0x00,0x01,0x80,0x00,0x0E,0x00,0x00,0x38,0x00,0x00,0xC0,0x00,0x07,0x00,0x00,0x1C,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00},/*"/",15*/
{0x00,0x00,0x00,0x00,0x7F,0x80,0x01,0xFF,0xE0,0x03,0x80,0x70,0x06,0x00,0x18,0x04,0x00,0x08,0x04,0x00,0x08,0x06,0x00,0x18,0x03,0x80,0x70,0x01,0xFF,0xE0,0x00,0x7F,0x80,0x00,0x00,0x00},/*"0",16*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x08,0x01,0x00,0x08,0x01,0x00,0x08,0x03,0xFF,0xF8,0x07,0xFF,0xF8,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00},/*"1",17*/
{0x00,0x00,0x00,0x01,0xC0,0x38,0x02,0xC0,0x58,0x04,0x00,0x98,0x04,0x01,0x18,0x04,0x02,0x18,0x04,0x04,0x18,0x06,0x1C,0x18,0x03,0xF8,0x18,0x01,0xE0,0xF8,0x00,0x00,0x00,0x00,0x00,0x00},/*"2",18*/
{0x00,0x00,0x00,0x01,0xC0,0xE0,0x03,0xC0,0xF0,0x04,0x00,0x08,0x04,0x08,0x08,0x04,0x08,0x08,0x06,0x18,0x08,0x03,0xF4,0x18,0x01,0xE7,0xF0,0x00,0x01,0xE0,0x00,0x00,0x00,0x00,0x00,0x00},/*"3",19*/
{0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x0D,0x00,0x00,0x11,0x00,0x00,0x61,0x00,0x00,0x81,0x08,0x03,0x01,0x08,0x07,0xFF,0xF8,0x0F,0xFF,0xF8,0x00,0x01,0x08,0x00,0x01,0x08,0x00,0x00,0x00},/*"4",20*/
{0x00,0x00,0x00,0x00,0x00,0xE0,0x07,0xFC,0xD0,0x06,0x08,0x08,0x06,0x10,0x08,0x06,0x10,0x08,0x06,0x10,0x08,0x06,0x18,0x38,0x06,0x0F,0xF0,0x06,0x07,0xC0,0x00,0x00,0x00,0x00,0x00,0x00},/*"5",21*/
{0x00,0x00,0x00,0x00,0x3F,0x80,0x01,0xFF,0xE0,0x03,0x84,0x30,0x02,0x08,0x18,0x04,0x10,0x08,0x04,0x10,0x08,0x04,0x10,0x08,0x07,0x18,0x10,0x03,0x0F,0xF0,0x00,0x07,0xC0,0x00,0x00,0x00},/*"6",22*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x07,0x00,0x00,0x06,0x00,0x00,0x06,0x00,0xF8,0x06,0x07,0xF8,0x06,0x18,0x00,0x06,0xE0,0x00,0x07,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00},/*"7",23*/
{0x00,0x00,0x00,0x01,0xE1,0xE0,0x03,0xF7,0xF0,0x06,0x34,0x10,0x04,0x18,0x08,0x04,0x18,0x08,0x04,0x0C,0x08,0x04,0x0C,0x08,0x06,0x16,0x18,0x03,0xF3,0xF0,0x01,0xC1,0xE0,0x00,0x00,0x00},/*"8",24*/
{0x00,0x00,0x00,0x00,0xF8,0x00,0x03,0xFC,0x30,0x03,0x06,0x38,0x04,0x02,0x08,0x04,0x02,0x08,0x04,0x02,0x08,0x04,0x04,0x10,0x03,0x08,0xF0,0x01,0xFF,0xC0,0x00,0x7F,0x00,0x00,0x00,0x00},/*"9",25*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x38,0x00,0x70,0x38,0x00,0x70,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*":",26*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x1A,0x00,0x30,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*";",27*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x14,0x00,0x00,0x22,0x00,0x00,0x41,0x00,0x00,0x80,0x80,0x01,0x00,0x40,0x02,0x00,0x20,0x04,0x00,0x10,0x08,0x00,0x08,0x00,0x00,0x00},/*"<",28*/
{0x00,0x00,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x21,0x00,0x00,0x00,0x00},/*"=",29*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x08,0x04,0x00,0x10,0x02,0x00,0x20,0x01,0x00,0x40,0x00,0x80,0x80,0x00,0x41,0x00,0x00,0x22,0x00,0x00,0x14,0x00,0x00,0x08,0x00,0x00,0x00,0x00},/*">",30*/
{0x00,0x00,0x00,0x03,0xC0,0x00,0x04,0xC0,0x00,0x04,0x00,0x00,0x08,0x00,0x38,0x08,0x0F,0x38,0x08,0x08,0x38,0x08,0x10,0x00,0x0C,0x30,0x00,0x07,0xE0,0x00,0x03,0xC0,0x00,0x00,0x00,0x00},/*"?",31*/
{0x00,0x00,0x00,0x00,0x3F,0x80,0x00,0xFF,0xE0,0x03,0x80,0x70,0x02,0x0F,0x10,0x06,0x70,0x88,0x04,0xC0,0x88,0x04,0x83,0x08,0x04,0x7F,0x88,0x02,0xC0,0x90,0x03,0x01,0x20,0x00,0xFE,0x40},/*"@",32*/
{0x00,0x00,0x08,0x00,0x00,0x18,0x00,0x01,0xF8,0x00,0x3E,0x08,0x01,0xC2,0x00,0x07,0x02,0x00,0x07,0xE2,0x00,0x00,0xFE,0x00,0x00,0x1F,0xC8,0x00,0x01,0xF8,0x00,0x00,0x38,0x00,0x00,0x08},/*"A",33*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x08,0x08,0x04,0x08,0x08,0x04,0x08,0x08,0x04,0x08,0x08,0x06,0x18,0x08,0x03,0xF4,0x18,0x01,0xE7,0xF0,0x00,0x01,0xE0,0x00,0x00,0x00},/*"B",34*/
{0x00,0x00,0x00,0x00,0x3F,0x80,0x01,0xFF,0xE0,0x03,0x80,0x70,0x02,0x00,0x18,0x04,0x00,0x08,0x04,0x00,0x08,0x04,0x00,0x08,0x04,0x00,0x10,0x06,0x00,0x20,0x07,0x80,0xC0,0x00,0x00,0x00},/*"C",35*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x00,0x08,0x04,0x00,0x08,0x04,0x00,0x08,0x04,0x00,0x18,0x02,0x00,0x10,0x03,0x80,0x70,0x01,0xFF,0xE0,0x00,0x7F,0x80,0x00,0x00,0x00},/*"D",36*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x08,0x08,0x04,0x08,0x08,0x04,0x08,0x08,0x04,0x08,0x08,0x04,0x3E,0x08,0x04,0x00,0x08,0x06,0x00,0x18,0x01,0x00,0x60,0x00,0x00,0x00},/*"E",37*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x08,0x08,0x04,0x08,0x00,0x04,0x08,0x00,0x04,0x08,0x00,0x04,0x3E,0x00,0x06,0x00,0x00,0x06,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00},/*"F",38*/
{0x00,0x00,0x00,0x00,0x3F,0x80,0x01,0xFF,0xE0,0x03,0x80,0x70,0x06,0x00,0x18,0x04,0x00,0x08,0x04,0x02,0x08,0x04,0x02,0x08,0x02,0x03,0xF0,0x07,0x83,0xF0,0x00,0x02,0x00,0x00,0x02,0x00},/*"G",39*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x08,0x08,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x04,0x08,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x00,0x08},/*"H",40*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x08,0x04,0x00,0x08,0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x00,0x08,0x04,0x00,0x08,0x04,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00},/*"I",41*/
{0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x07,0x00,0x00,0x01,0x04,0x00,0x01,0x04,0x00,0x01,0x04,0x00,0x03,0x07,0xFF,0xFE,0x07,0xFF,0xFC,0x04,0x00,0x00,0x04,0x00,0x00,0x04,0x00,0x00},/*"J",42*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x0C,0x08,0x00,0x18,0x00,0x00,0x3E,0x00,0x04,0xC7,0x80,0x05,0x03,0xC8,0x06,0x00,0xF8,0x04,0x00,0x38,0x04,0x00,0x18,0x00,0x00,0x08},/*"K",43*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x18,0x00,0x00,0x60,0x00,0x00,0x00},/*"L",44*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0x80,0x08,0x07,0xFC,0x00,0x00,0x7F,0xC0,0x00,0x03,0xF8,0x00,0x07,0xC0,0x00,0x78,0x00,0x07,0x80,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x00,0x08},/*"M",45*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0x00,0x08,0x03,0xC0,0x00,0x00,0xE0,0x00,0x00,0x38,0x00,0x00,0x1E,0x00,0x00,0x07,0x00,0x00,0x01,0xC0,0x04,0x00,0xF0,0x07,0xFF,0xF8,0x04,0x00,0x00},/*"N",46*/
{0x00,0x00,0x00,0x00,0x7F,0x80,0x01,0xFF,0xE0,0x03,0x80,0x70,0x06,0x00,0x18,0x04,0x00,0x08,0x04,0x00,0x08,0x06,0x00,0x18,0x03,0x00,0x30,0x01,0xFF,0xE0,0x00,0x7F,0x80,0x00,0x00,0x00},/*"O",47*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x04,0x08,0x04,0x04,0x00,0x04,0x04,0x00,0x04,0x04,0x00,0x04,0x04,0x00,0x06,0x0C,0x00,0x03,0xF8,0x00,0x01,0xF0,0x00,0x00,0x00,0x00},/*"P",48*/
{0x00,0x00,0x00,0x00,0x7F,0x80,0x01,0xFF,0xE0,0x03,0x80,0x70,0x06,0x00,0x88,0x04,0x00,0x88,0x04,0x00,0xC8,0x06,0x00,0x3C,0x03,0x00,0x3E,0x01,0xFF,0xE6,0x00,0x7F,0x84,0x00,0x00,0x00},/*"Q",49*/
{0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x08,0x08,0x04,0x08,0x00,0x04,0x0C,0x00,0x04,0x0F,0x00,0x04,0x0B,0xC0,0x06,0x10,0xF0,0x03,0xF0,0x38,0x01,0xE0,0x08,0x00,0x00,0x08},/*"R",50*/
{0x00,0x00,0x00,0x01,0xE0,0xF8,0x03,0xF0,0x30,0x06,0x30,0x10,0x04,0x18,0x08,0x04,0x18,0x08,0x04,0x0C,0x08,0x04,0x0C,0x08,0x02,0x06,0x18,0x02,0x07,0xF0,0x07,0x81,0xE0,0x00,0x00,0x00},/*"S",51*/
{0x01,0x80,0x00,0x06,0x00,0x00,0x04,0x00,0x00,0x04,0x00,0x00,0x04,0x00,0x08,0x07,0xFF,0xF8,0x07,0xFF,0xF8,0x04,0x00,0x08,0x04,0x00,0x00,0x04,0x00,0x00,0x06,0x00,0x00,0x01,0x80,0x00},/*"T",52*/
{0x04,0x00,0x00,0x07,0xFF,0xE0,0x07,0xFF,0xF0,0x04,0x00,0x18,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x04,0x00,0x10,0x07,0xFF,0xE0,0x04,0x00,0x00},/*"U",53*/
{0x04,0x00,0x00,0x06,0x00,0x00,0x07,0xE0,0x00,0x07,0xFE,0x00,0x04,0x1F,0xE0,0x00,0x01,0xF8,0x00,0x00,0x38,0x00,0x01,0xE0,0x04,0x3E,0x00,0x07,0xC0,0x00,0x06,0x00,0x00,0x04,0x00,0x00},/*"V",54*/
{0x04,0x00,0x00,0x07,0xE0,0x00,0x07,0xFF,0xC0,0x04,0x1F,0xF8,0x00,0x07,0xC0,0x07,0xF8,0x00,0x07,0xFF,0x80,0x04,0x3F,0xF8,0x00,0x07,0xC0,0x04,0xF8,0x00,0x07,0x00,0x00,0x04,0x00,0x00},/*"W",55*/
{0x00,0x00,0x00,0x04,0x00,0x08,0x06,0x00,0x18,0x07,0xC0,0x78,0x05,0xF1,0xC8,0x00,0x3E,0x00,0x00,0x1F,0x80,0x04,0x63,0xE8,0x07,0x80,0xF8,0x06,0x00,0x18,0x04,0x00,0x08,0x00,0x00,0x00},/*"X",56*/
{0x04,0x00,0x00,0x06,0x00,0x00,0x07,0x80,0x00,0x07,0xE0,0x08,0x04,0x7C,0x08,0x00,0x1F,0xF8,0x00,0x07,0xF8,0x00,0x18,0x08,0x04,0xE0,0x08,0x07,0x00,0x00,0x06,0x00,0x00,0x04,0x00,0x00},/*"Y",57*/
{0x00,0x00,0x00,0x01,0x00,0x08,0x06,0x00,0x38,0x04,0x00,0xF8,0x04,0x03,0xE8,0x04,0x0F,0x08,0x04,0x7C,0x08,0x05,0xF0,0x08,0x07,0xC0,0x08,0x07,0x00,0x18,0x04,0x00,0x60,0x00,0x00,0x00},/*"Z",58*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xFE,0x20,0x00,0x02,0x20,0x00,0x02,0x20,0x00,0x02,0x20,0x00,0x02,0x20,0x00,0x02,0x00,0x00,0x00},/*"[",59*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x07,0x00,0x00,0x00,0xC0,0x00,0x00,0x38,0x00,0x00,0x06,0x00,0x00,0x01,0xC0,0x00,0x00,0x30,0x00,0x00,0x0E,0x00,0x00,0x01,0x00,0x00,0x00},/*"\",60*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x02,0x20,0x00,0x02,0x20,0x00,0x02,0x20,0x00,0x02,0x20,0x00,0x02,0x3F,0xFF,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"]",61*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x10,0x00,0x00,0x30,0x00,0x00,0x20,0x00,0x00,0x30,0x00,0x00,0x10,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
{0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01},/*"_",63*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x20,0x00,0x00,0x10,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
{0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x19,0xF8,0x00,0x1B,0x18,0x00,0x22,0x08,0x00,0x26,0x08,0x00,0x24,0x08,0x00,0x24,0x10,0x00,0x3F,0xF8,0x00,0x1F,0xF8,0x00,0x00,0x08,0x00,0x00,0x18},/*"a",65*/
{0x00,0x00,0x00,0x04,0x00,0x00,0x07,0xFF,0xF8,0x0F,0xFF,0xF0,0x00,0x18,0x18,0x00,0x10,0x08,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x30,0x18,0x00,0x1F,0xF0,0x00,0x0F,0xC0,0x00,0x00,0x00},/*"b",66*/
{0x00,0x00,0x00,0x00,0x07,0xC0,0x00,0x1F,0xF0,0x00,0x18,0x30,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x3C,0x08,0x00,0x1C,0x10,0x00,0x00,0x60,0x00,0x00,0x00,0x00,0x00,0x00},/*"c",67*/
{0x00,0x00,0x00,0x00,0x07,0xC0,0x00,0x1F,0xF0,0x00,0x38,0x18,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x20,0x08,0x04,0x10,0x10,0x07,0xFF,0xF8,0x0F,0xFF,0xF0,0x00,0x00,0x10,0x00,0x00,0x00},/*"d",68*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xC0,0x00,0x1F,0xF0,0x00,0x12,0x30,0x00,0x22,0x18,0x00,0x22,0x08,0x00,0x22,0x08,0x00,0x32,0x08,0x00,0x1E,0x10,0x00,0x0E,0x20,0x00,0x00,0x00},/*"e",69*/
{0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x20,0x08,0x00,0x20,0x08,0x01,0xFF,0xF8,0x03,0xFF,0xF8,0x06,0x20,0x08,0x04,0x20,0x08,0x04,0x20,0x08,0x07,0x20,0x00,0x03,0x00,0x00,0x00,0x00,0x00},/*"f",70*/
{0x00,0x00,0x00,0x00,0x00,0x0E,0x00,0x0E,0x6E,0x00,0x1F,0xF3,0x00,0x31,0xB1,0x00,0x20,0xB1,0x00,0x20,0xB1,0x00,0x31,0x91,0x00,0x1F,0x13,0x00,0x2E,0x1E,0x00,0x20,0x0E,0x00,0x30,0x00},/*"g",71*/
{0x00,0x00,0x00,0x04,0x00,0x08,0x07,0xFF,0xF8,0x0F,0xFF,0xF8,0x00,0x10,0x08,0x00,0x20,0x00,0x00,0x20,0x00,0x00,0x20,0x08,0x00,0x3F,0xF8,0x00,0x1F,0xF8,0x00,0x00,0x08,0x00,0x00,0x00},/*"h",72*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x20,0x08,0x06,0x3F,0xF8,0x06,0x3F,0xF8,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00},/*"i",73*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x03,0x00,0x20,0x01,0x00,0x20,0x01,0x00,0x20,0x03,0x06,0x3F,0xFE,0x06,0x3F,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"j",74*/
{0x00,0x00,0x00,0x04,0x00,0x08,0x07,0xFF,0xF8,0x0F,0xFF,0xF8,0x00,0x01,0x88,0x00,0x03,0x00,0x00,0x2F,0xC0,0x00,0x38,0xF8,0x00,0x20,0x38,0x00,0x20,0x08,0x00,0x00,0x08,0x00,0x00,0x00},/*"k",75*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x08,0x04,0x00,0x08,0x04,0x00,0x08,0x07,0xFF,0xF8,0x0F,0xFF,0xF8,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00},/*"l",76*/
{0x00,0x20,0x08,0x00,0x3F,0xF8,0x00,0x3F,0xF8,0x00,0x10,0x08,0x00,0x20,0x00,0x00,0x3F,0xF8,0x00,0x3F,0xF8,0x00,0x10,0x08,0x00,0x20,0x00,0x00,0x3F,0xF8,0x00,0x3F,0xF8,0x00,0x00,0x08},/*"m",77*/
{0x00,0x00,0x00,0x00,0x20,0x08,0x00,0x3F,0xF8,0x00,0x3F,0xF8,0x00,0x10,0x08,0x00,0x10,0x00,0x00,0x20,0x00,0x00,0x20,0x08,0x00,0x3F,0xF8,0x00,0x1F,0xF8,0x00,0x00,0x08,0x00,0x00,0x00},/*"n",78*/
{0x00,0x00,0x00,0x00,0x07,0xC0,0x00,0x0F,0xF0,0x00,0x18,0x30,0x00,0x30,0x08,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x30,0x08,0x00,0x18,0x30,0x00,0x0F,0xF0,0x00,0x07,0xC0,0x00,0x00,0x00},/*"o",79*/
{0x00,0x00,0x00,0x00,0x20,0x01,0x00,0x3F,0xFF,0x00,0x3F,0xFF,0x00,0x10,0x11,0x00,0x20,0x09,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x30,0x38,0x00,0x1F,0xF0,0x00,0x0F,0xC0,0x00,0x00,0x00},/*"p",80*/
{0x00,0x00,0x00,0x00,0x07,0xC0,0x00,0x1F,0xF0,0x00,0x38,0x18,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x20,0x09,0x00,0x10,0x11,0x00,0x1F,0xFF,0x00,0x3F,0xFF,0x00,0x00,0x01,0x00,0x00,0x00},/*"q",81*/
{0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x3F,0xF8,0x00,0x3F,0xF8,0x00,0x08,0x08,0x00,0x10,0x08,0x00,0x20,0x08,0x00,0x20,0x00,0x00,0x30,0x00,0x00,0x30,0x00,0x00,0x00,0x00},/*"r",82*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x78,0x00,0x1E,0x18,0x00,0x33,0x08,0x00,0x23,0x08,0x00,0x21,0x08,0x00,0x21,0x88,0x00,0x21,0x98,0x00,0x30,0xF0,0x00,0x38,0x60,0x00,0x00,0x00},/*"s",83*/
{0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x20,0x00,0x00,0x20,0x00,0x00,0xFF,0xF0,0x03,0xFF,0xF8,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00},/*"t",84*/
{0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x3F,0xF0,0x00,0x7F,0xF8,0x00,0x00,0x18,0x00,0x00,0x08,0x00,0x00,0x08,0x00,0x20,0x10,0x00,0x3F,0xF8,0x00,0x7F,0xF0,0x00,0x00,0x10,0x00,0x00,0x00},/*"u",85*/
{0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x30,0x00,0x00,0x3C,0x00,0x00,0x3F,0x80,0x00,0x23,0xF0,0x00,0x00,0x78,0x00,0x00,0x70,0x00,0x23,0x80,0x00,0x3C,0x00,0x00,0x30,0x00,0x00,0x20,0x00},/*"v",86*/
{0x00,0x20,0x00,0x00,0x3C,0x00,0x00,0x3F,0xE0,0x00,0x23,0xF8,0x00,0x00,0xE0,0x00,0x27,0x00,0x00,0x3E,0x00,0x00,0x3F,0xE0,0x00,0x21,0xF8,0x00,0x01,0xE0,0x00,0x3E,0x00,0x00,0x20,0x00},/*"w",87*/
{0x00,0x00,0x00,0x00,0x20,0x08,0x00,0x20,0x08,0x00,0x38,0x38,0x00,0x3E,0x68,0x00,0x27,0x80,0x00,0x03,0xC8,0x00,0x2C,0xF8,0x00,0x38,0x38,0x00,0x20,0x18,0x00,0x20,0x08,0x00,0x00,0x00},/*"x",88*/
{0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x30,0x03,0x00,0x3C,0x01,0x00,0x3F,0x83,0x00,0x23,0xEC,0x00,0x00,0x70,0x00,0x23,0x80,0x00,0x3C,0x00,0x00,0x20,0x00,0x00,0x20,0x00,0x00,0x00,0x00},/*"y",89*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x08,0x00,0x20,0x38,0x00,0x20,0xF8,0x00,0x23,0xE8,0x00,0x2F,0x88,0x00,0x3E,0x08,0x00,0x38,0x08,0x00,0x20,0x18,0x00,0x00,0x70,0x00,0x00,0x00},/*"z",90*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x14,0x00,0x1F,0xF7,0xFC,0x30,0x00,0x06,0x20,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00},/*"{",91*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"|",92*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x02,0x30,0x00,0x06,0x1F,0xF7,0xFC,0x00,0x14,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
{0x00,0x00,0x00,0x18,0x00,0x00,0x60,0x00,0x00,0x40,0x00,0x00,0x40,0x00,0x00,0x20,0x00,0x00,0x10,0x00,0x00,0x08,0x00,0x00,0x04,0x00,0x00,0x04,0x00,0x00,0x0C,0x00,0x00,0x10,0x00,0x00},/*"~",94*/
};  


// ------------------  汉字字模的数据结构定义 ------------------------ //
struct  Cn32CharTypeDef                   // 汉字字模数据结构 
{
	unsigned char  Index[2];            // 汉字内码索引,一个汉字占两个字节	
	unsigned char   Msk[116];            // 点阵码数据(32*29/8) 
};
/////////////////////////////////////////////////////////////////////////
// 汉字字模表,大小为：32*29                                                          //
// 汉字库: 宋体二号,横向取模左高位,数据排列:从左到右从上到下           //
/////////////////////////////////////////////////////////////////////////
code struct  Cn32CharTypeDef const CnChar32x29[]=
{
/*--  文字:  普  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"普",0x00,0x00,0x00,0x00,0x00,0xE0,0x38,0x00,0x00,0x78,0x3C,0x00,0x00,0x3C,0x78,0x00,
0x00,0x3C,0x70,0xC0,0x00,0x1C,0xE1,0xE0,0x1F,0xFF,0xFF,0xF0,0x00,0x1C,0xE3,0x00,
0x0E,0x1C,0xE7,0xC0,0x07,0x9C,0xE7,0x80,0x03,0xDC,0xEF,0x00,0x03,0xDC,0xEE,0x00,
0x01,0xDC,0xFC,0x60,0x00,0x9C,0xF9,0xF0,0x7F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x00,
0x01,0xC0,0x0E,0x00,0x01,0xFF,0xFF,0x00,0x01,0xC0,0x0E,0x00,0x01,0xC0,0x0E,0x00,
0x01,0xC0,0x0E,0x00,0x01,0xFF,0xFE,0x00,0x01,0xC0,0x0E,0x00,0x01,0xC0,0x0E,0x00,
0x01,0xC0,0x0E,0x00,0x01,0xFF,0xFE,0x00,0x01,0xC0,0x0E,0x00,0x01,0xC0,0x0E,0x00,
0x00,0x00,0x00,0x00,
	

/*--  文字:  中  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"中",0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0x07,0x00,0x00,
0x00,0x07,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x07,0x01,0x80,0x1F,0xFF,0xFF,0xE0,
0x1F,0xFF,0xFF,0xE0,0x1E,0x07,0x01,0xC0,0x1E,0x07,0x01,0xC0,0x1E,0x07,0x01,0xC0,
0x1E,0x07,0x01,0xC0,0x1E,0x07,0x01,0xC0,0x1E,0x07,0x01,0xC0,0x1F,0xFF,0xFF,0xC0,
0x1F,0xFF,0xFF,0xC0,0x1E,0x07,0x01,0xC0,0x1C,0x07,0x01,0x80,0x00,0x07,0x00,0x00,
0x00,0x07,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x07,0x00,0x00,
0x00,0x07,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x07,0x00,0x00,
0x00,0x00,0x00,0x00,

/*--  文字:  科  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"科",0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x3C,0x07,0xC0,0x01,0xFC,0x07,0x80,
0x3F,0xE0,0x07,0x80,0x39,0xC1,0xC7,0x80,0x01,0xC0,0xE7,0x80,0x01,0xC0,0xF7,0x80,
0x01,0xC0,0x77,0x80,0x01,0xDE,0x77,0x80,0x7F,0xFE,0x07,0x80,0x01,0xC0,0x07,0x80,
0x03,0xC3,0xC7,0x80,0x03,0xE1,0xE7,0x80,0x03,0xF8,0xF7,0x80,0x07,0xFC,0xE7,0xF0,
0x0F,0xDE,0x67,0xF8,0x0F,0xDC,0x07,0xF8,0x1F,0xC0,0xFF,0x80,0x1D,0xDF,0xE7,0x80,
0x39,0xCC,0x07,0x80,0x71,0xC0,0x07,0x80,0x61,0xC0,0x07,0x80,0x01,0xC0,0x07,0x80,
0x01,0xC0,0x07,0x80,0x01,0xE0,0x07,0x80,0x01,0xE0,0x07,0x80,0x01,0xC0,0x07,0x00,
0x00,0x00,0x00,0x00,

/*--  文字:  技  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"技",0x00,0x00,0x00,0x00,0x03,0x80,0x30,0x00,0x03,0xC0,0x3C,0x00,0x03,0xC0,0x3C,0x00,
0x03,0xC0,0x38,0x00,0x03,0xC0,0x38,0x00,0x03,0xC0,0x38,0x60,0x03,0xF8,0x38,0xF0,
0x7F,0xFF,0xFF,0xF0,0x03,0xC0,0x38,0x00,0x03,0xC0,0x38,0x00,0x03,0xC0,0x38,0x00,
0x03,0xDC,0x39,0xC0,0x03,0xFF,0xFF,0xE0,0x07,0xE3,0x83,0xC0,0x3F,0xC1,0x83,0xC0,
0x7F,0xC1,0xC3,0x80,0x3B,0xC1,0xC7,0x80,0x03,0xC0,0xEF,0x00,0x03,0xC0,0xEF,0x00,
0x03,0xC0,0x7E,0x00,0x03,0xC0,0x7C,0x00,0x03,0xC0,0x7C,0x00,0x03,0xC0,0xFE,0x00,
0x3B,0xC3,0xEF,0x80,0x3F,0x87,0x87,0xF8,0x0F,0xBF,0x03,0xF8,0x07,0x78,0x00,0xE0,
0x00,0x00,0x00,0x00,
/*--  文字:  年  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"年",0x00,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,0x01,0xF0,0x00,0x00,0x01,0xE0,0x00,0x00,
0x03,0xC0,0x00,0xC0,0x03,0xC0,0x01,0xE0,0x07,0xFF,0xFF,0xF0,0x07,0x03,0xC0,0x00,
0x0E,0x03,0xC0,0x00,0x1E,0x03,0xC0,0x00,0x3C,0x03,0xC3,0x00,0x73,0x03,0xC7,0x80,
0x63,0xFF,0xFF,0xC0,0x03,0x83,0xC0,0x00,0x03,0x83,0xC0,0x00,0x03,0x83,0xC0,0x00,
0x03,0x83,0xC0,0x00,0x03,0x83,0xC0,0x60,0x03,0x83,0xC0,0xF0,0x7F,0xFF,0xFF,0xF8,
0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
0x00,0x00,0x00,0x00,

/*--  文字:  月  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"月",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0x07,0x00,0x00,0xFF,0xFF,0x80,
0x00,0xF0,0x07,0x80,0x00,0xF0,0x07,0x00,0x00,0xF0,0x07,0x00,0x00,0xF0,0x07,0x00,
0x00,0xF0,0x07,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0xF0,0x07,0x00,
0x00,0xF0,0x07,0x00,0x00,0xF0,0x07,0x00,0x00,0xF0,0x07,0x00,0x00,0xE0,0x07,0x00,
0x00,0xFF,0xFF,0x00,0x00,0xE0,0x07,0x00,0x00,0xE0,0x07,0x00,0x00,0xE0,0x07,0x00,
0x01,0xE0,0x07,0x00,0x01,0xC0,0x07,0x00,0x01,0xC0,0x07,0x00,0x03,0x80,0x07,0x00,
0x07,0x80,0xF7,0x00,0x0F,0x00,0x7F,0x00,0x1E,0x00,0x1F,0x00,0x38,0x00,0x1C,0x00,
0x00,0x00,0x00,0x00,

/*--  文字:  日  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"日",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x03,0x00,0x03,0xFF,0xFF,0x80,
0x03,0xFF,0xFF,0x80,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,
0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,
0x03,0x80,0x07,0x00,0x03,0xFF,0xFF,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,
0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,
0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0xFF,0xFF,0x00,
0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,

/*--  文字:  星  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"星",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x07,0x00,0x03,0xFF,0xFF,0x80,
0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0xFF,0xFF,0x00,
0x03,0x80,0x07,0x00,0x03,0x80,0x07,0x00,0x03,0xFF,0xFF,0x00,0x03,0xFF,0xFF,0x00,
0x03,0x87,0x07,0x00,0x03,0x87,0xC0,0x00,0x03,0xC7,0x81,0x00,0x03,0xC7,0x83,0x80,
0x07,0xFF,0xFF,0xC0,0x07,0x07,0x80,0x00,0x0F,0x07,0x80,0x00,0x1E,0x07,0x86,0x00,
0x1C,0x07,0x8F,0x00,0x3B,0xFF,0xFF,0x80,0x70,0x07,0x80,0x00,0x00,0x07,0x80,0x00,
0x00,0x07,0x80,0xE0,0x00,0x07,0x81,0xF0,0x7F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,

/*--  文字:  期  --*/
/*--  宋体22;  此字体下对应的点阵为：宽x高=30x29   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=32x29  --*/
"期",0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x07,0x9E,0x00,0x00,0x07,0x9E,0x7F,0xF0,
0x07,0x9E,0x7F,0xF0,0x07,0x9F,0xF8,0xF0,0x3F,0xFF,0xF8,0xF0,0x1F,0x9E,0x78,0xF0,
0x07,0x9E,0x78,0xF0,0x07,0x9E,0x78,0xF0,0x07,0xFE,0x7F,0xF0,0x07,0x9E,0x78,0xF0,
0x07,0x9E,0x78,0xF0,0x07,0x9E,0x70,0xF0,0x07,0xFE,0x70,0xF0,0x07,0x9E,0x70,0xF0,
0x07,0x9E,0x7F,0xF0,0x07,0x9F,0xFF,0xF0,0x3F,0xFF,0xF0,0xF0,0x11,0x90,0x70,0xF0,
0x03,0xDC,0xF0,0xF0,0x03,0xDE,0xE0,0xF0,0x07,0x8F,0xE0,0xF0,0x0F,0x0F,0xE0,0xF0,
0x0E,0x07,0xC0,0xF0,0x1C,0x03,0x8F,0xF0,0x38,0x0F,0x03,0xE0,0x20,0x1C,0x01,0xC0,
0x00,0x00,0x00,0x00,

};
	




#endif