蓝牙L2CAP剖析（二）
关键字：bluetooth 蓝牙协议 HCI剖析 HCI概述 HCI笔记 LMP L2CAP SDP RFCOMM
作者：zhongjun
本着互相学习的目的，来分享此一系列的文章，欢迎转载，请注明作者，尊重版权，谢谢文章有不当处请指正，共同学习
LMP剖析 + 模拟源码：
蓝牙LMP剖析（一）
蓝牙LMP剖析（二）
HCI剖析 + 模拟源码：
蓝牙HCI剖析（一）
蓝牙HCI剖析（二）
蓝牙HCI剖析（三）
L2CAP剖析 + 模拟源码
蓝牙L2CAP剖析（一）
rfcomm剖析 + 模拟源码（未完成）
另外可以从蓝牙栏目访问我的CSDN：http://blog.csdn.net/XiaoXiaoPengBo/article/category/5998687
------------------------------------------------------------------------------------------------------------------------------------
华丽分割线，进入正题
------------------------------------------------------------------------------------------------------------------------------------
一,部分代码没有完成，只是模拟一个面向连接的从建立到断开的过程，另外，L2CAP的重点状态机和拆包重组没有模拟
bt_l2cap.h
/*
* This file is part of the L2CAP protocal.
* Data :20160510
* Author: zhongjun
*
*/
#ifndef BT_L2CAP_H_H
#define BT_L2CAP_H_H
#include "bt_cfg.h"
#ifdef DEBUG_BT_L2CAP
#define DEBUG(x) {printf x;}
#define BT_L2CAP_DEBUG(x) DEBUG(x)
#else
#define BT_L2CAP_DEBUG(x)
#endif
/* L2CAP CHANNEL */
#define L2CAP_SIG_CH 0x0001
#define L2CAP_CONLESS_CH 0x0002
/* L2CAP defaults */
#define L2CAP_DEFAULT_MTU 672
#define L2CAP_DEFAULT_FLUSH_TO 0xFFFF
/* UPPER LAYER PSM */
#define SDP_PSM 0x0001
/* L2CAP command codes */
#define L2CAP_COMMAND_REJ 0x01
#define L2CAP_CONN_REQ 0x02
#define L2CAP_CONN_RSP 0x03
#define L2CAP_CONF_REQ 0x04
#define L2CAP_CONF_RSP 0x05
#define L2CAP_DISCONN_REQ 0x06
#define L2CAP_DISCONN_RSP 0x07
#define L2CAP_ECHO_REQ 0x08
#define L2CAP_ECHO_RSP 0x09
#define L2CAP_INFO_REQ 0x0a
#define L2CAP_INFO_RSP 0x0b
/* connect result */
#define L2CAP_CR_SUCCESS 0x0000
#define L2CAP_CR_PEND 0x0001
#define L2CAP_CR_NOSUP_PSM 0x0002
#define L2CAP_CR_SEC_BLOCK 0x0003
#define L2CAP_CR_NO_RSR 0x0004
/* config result */
#define L2CAP_CONF_SUCCESS 0x0000
#define L2CAP_CONF_UNACCEPT 0x0001
#define L2CAP_CONF_REJECT 0x0002
#define L2CAP_CONF_UNKNOWN 0x0003
/* config option */
#define L2CAP_CONF_MTU 0x01
#define L2CAP_CONF_FLUSH_TO 0x02
#define L2CAP_CONF_QOS 0x03
#define L2CAP_CONF_RFC 0x04
#define L2CAP_CONF_RFC_MODE 0x04
#pragma pack(1)
/* L2CAP structures hdr*/
typedef struct {
uint16_t len;
uint16_t cid;
}L2CAP_PDU_HDR_Format;
typedef struct {
L2CAP_PDU_HDR_Format sig_hdr;
uint8_t code;
uint8_t ident;
uint16_t len;
}L2CAP_SIG_HDR_Format;
/* L2CAP structures detail*/
typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t psm;
uint16_t scid;
}L2CAP_Con_Req;
typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t dst_cid;
uint16_t src_cid;
uint16_t result;
uint16_t status;
}L2CAP_Con_Rsp;
typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t dst_cid;
uint16_t flags;
uint8_t data[0];
}L2CAP_Conf_Req;
typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t src_cid;
uint16_t flags;
uint16_t result;
uint8_t data[0];
}L2CAP_Conf_Rsp;
typedef struct {
L2CAP_PDU_HDR_Format com_hdr;
uint8_t data[0];
}L2CAP_Upper_Layer_data_Format;
typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t dcid;
uint16_t scid;
}L2CAP_Discon_req;
typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t dcid;
uint16_t scid;
}L2CAP_Discon_rsp;
#pragma pack()
/* API */
/* send pdu */
int L2CAP_Send_SIG_Con_Req(uint8_t ident,uint16_t psm,uint16_t scid);
int L2CAP_Send_SIG_Conf_Req(uint8_t ident,uint16_t dcid,uint16_t flags,uint8_t *conf_opt,uint8_t opt_len);
int L2CAP_Send_Upper_Layer_data(uint16_t cid,uint8_t *data,uint16_t length);
int L2CAP_Send_SIG_Discon_Req(uint8_t ident,uint16_t dcid,uint16_t scid);
int L2CAP_Send_PDU(uint8_t *PDU,uint32_t length);
/* reve pdu */
int L2CAP_Parse_PDU(uint8_t *PDU,uint32_t length);
int L2CAP_Parse_SIG_Con_Rsp_PDU(uint8_t *PDU,uint32_t length);
int L2CAP_Parse_SIG_Conf_Rsp_PDU(uint8_t *PDU,uint32_t length);
int L2CAP_Parse_SIG_Discon_Rsp_PDU(uint8_t *PDU,uint32_t length);
#endifbt_l2cap.c
#include "bt_l2cap.h"
int L2CAP_Send_SIG_Con_Req(uint8_t ident,uint16_t psm,uint16_t scid)
{
L2CAP_Con_Req PDU;
PDU.com_hdr.sig_hdr.cid = L2CAP_SIG_CH;
PDU.com_hdr.sig_hdr.len = sizeof(L2CAP_Con_Req) - sizeof(L2CAP_PDU_HDR_Format);
PDU.com_hdr.code = L2CAP_CONN_REQ;
PDU.com_hdr.ident = ident;
PDU.com_hdr.len = sizeof(L2CAP_Con_Req) - sizeof(L2CAP_SIG_HDR_Format);
PDU.psm = psm;
PDU.scid = scid;
L2CAP_Send_PDU((uint8_t *)&PDU,sizeof(L2CAP_Con_Req));
}
int L2CAP_Send_SIG_Conf_Req(uint8_t ident,uint16_t dcid,uint16_t flags,uint8_t *conf_opt,uint8_t opt_len)
{
L2CAP_Conf_Req *PDU = (L2CAP_Conf_Req *)malloc(sizeof(L2CAP_Conf_Req) + opt_len);
(PDU->com_hdr).sig_hdr.cid = L2CAP_SIG_CH;
(PDU->com_hdr).sig_hdr.len = sizeof(L2CAP_Conf_Req) - sizeof(L2CAP_PDU_HDR_Format) + opt_len;
(PDU->com_hdr).code = L2CAP_CONF_REQ;
(PDU->com_hdr).ident = ident;
(PDU->com_hdr).len = sizeof(L2CAP_Conf_Req) - sizeof(L2CAP_SIG_HDR_Format) + opt_len;
PDU->dst_cid = dcid;
PDU->flags = flags;
memcpy(PDU->data,conf_opt,opt_len);
L2CAP_Send_PDU(PDU,sizeof(L2CAP_Conf_Req) + opt_len);
}
int L2CAP_Send_Upper_Layer_data(uint16_t cid,uint8_t *data,uint16_t length)
{
L2CAP_Upper_Layer_data_Format *PDU = (L2CAP_Upper_Layer_data_Format *)malloc(sizeof(L2CAP_Upper_Layer_data_Format) + length);
(PDU->com_hdr).cid = cid;
(PDU->com_hdr).len = sizeof(L2CAP_Upper_Layer_data_Format) + length;
memcpy(PDU->data,data,length);
L2CAP_Send_PDU(PDU,sizeof(L2CAP_Upper_Layer_data_Format) + length);
}
int L2CAP_Send_SIG_Discon_Req(uint8_t ident,uint16_t dcid,uint16_t scid)
{
L2CAP_Discon_req PDU;
PDU.com_hdr.sig_hdr.cid = L2CAP_SIG_CH;
PDU.com_hdr.sig_hdr.len = sizeof(L2CAP_Discon_req) - sizeof(L2CAP_PDU_HDR_Format);
PDU.com_hdr.code = L2CAP_DISCONN_REQ;
PDU.com_hdr.ident = ident;
PDU.com_hdr.len = sizeof(L2CAP_Con_Req) - sizeof(L2CAP_SIG_HDR_Format);
PDU.dcid = dcid;
PDU.scid = scid;
L2CAP_Send_PDU((uint8_t *)&PDU,sizeof(L2CAP_Con_Req));
}
int L2CAP_Send_PDU(uint8_t *PDU,uint32_t length)
{
int index = 0;
BT_L2CAP_DEBUG((" >> Send L2CAP REQ PDU:"));
for(index = 0; index < length; index++)
{
BT_L2CAP_DEBUG(("0x%02x ",PDU[index]));
}
BT_L2CAP_DEBUG(("\n"));
}
int L2CAP_Parse_PDU(uint8_t *PDU,uint32_t length)
{
L2CAP_PDU_HDR_Format *TMP_PDU = (L2CAP_PDU_HDR_Format *)PDU;
if((TMP_PDU->cid) == L2CAP_SIG_CH)
{
uint8_t tmp_code;
L2CAP_SIG_HDR_Format *pdu = (L2CAP_SIG_HDR_Format *)PDU;
BT_L2CAP_DEBUG(("SIG PDU\n"));
tmp_code = pdu->code;
switch(tmp_code)
{
case L2CAP_CONN_RSP:
{
BT_L2CAP_DEBUG(("L2CAP_CONN_RSP\n"));
L2CAP_Parse_SIG_Con_Rsp_PDU(PDU,length);
break;
}
case L2CAP_CONF_RSP:
{
BT_L2CAP_DEBUG(("L2CAP_CONF_RSP\n"));
L2CAP_Parse_SIG_Conf_Rsp_PDU(PDU,length);
break;
}
case L2CAP_DISCONN_RSP:
{
BT_L2CAP_DEBUG(("L2CAP_DISCONN_RSP\n"));
L2CAP_Parse_SIG_Discon_Rsp_PDU(PDU,length);
break;
}
default:
{
break;
}
}
}
else
{
//TODO
}
}
int L2CAP_Parse_SIG_Con_Rsp_PDU(uint8_t *PDU,uint32_t length)
{
L2CAP_Con_Rsp *tmp_pdu = (L2CAP_Con_Rsp *)PDU;
if(tmp_pdu->result == L2CAP_CR_SUCCESS)
{
BT_L2CAP_DEBUG(("connect successful\n"));
}
else if(tmp_pdu->result == L2CAP_CR_PEND)
{
BT_L2CAP_DEBUG(("connect pending\n"));
}
}
int L2CAP_Parse_SIG_Conf_Rsp_PDU(uint8_t *PDU,uint32_t length)
{
L2CAP_Conf_Rsp *tmp_pdu = (L2CAP_Conf_Rsp *)PDU;
if(tmp_pdu->result == L2CAP_CONF_SUCCESS)
{
BT_L2CAP_DEBUG(("config successful\n"));
}
else if(tmp_pdu->result == L2CAP_CONF_UNACCEPT)
{
BT_L2CAP_DEBUG(("config unaccept\n"));
}
}
int L2CAP_Parse_SIG_Discon_Rsp_PDU(uint8_t *PDU,uint32_t length)
{
}bt_cfg.h
#ifndef BT_LMP_CFG_H
#define BT_LMP_CFG_H
#include
#include
#include
#define DEBUG_BT_L2CAP
typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;
typedef char int8_t;
typedef short int16_t;
typedef int int32_t;
#undef NULL
#if defined(__cplusplus)
#define NULL 0
#else
#define NULL ((void *)0)
#endif
#endif
main.c
#include
#include "bt_l2cap.h"
int main()
{
uint8_t con_rsp_pdu[] = {0x0C,0x00,0x01,0x00,0x03,0x79,0x08,0x00,0x06,0x08,0x40,0x00,0x00,0x00,0x00,0x00};
uint8_t conf_option[] = {0x01,0x02,0xF4,0x01,0x02,0x02,0xFF,0xFF};
uint8_t conf_rsp_pdu[] = {0x0E,0x00,0x01,0x00,0x05,0x7A,0x0A,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0xF4,0x01};
uint8_t upper_layer_data[] = {0x1,0x1,0x1,0x1,0x1,0x1};
L2CAP_Send_SIG_Con_Req(0x79,SDP_PSM,0x40);
L2CAP_Parse_PDU(con_rsp_pdu,sizeof(con_rsp_pdu));
L2CAP_Send_SIG_Conf_Req(0x79,0x0806,0x0,conf_option,sizeof(conf_option));
L2CAP_Parse_PDU(conf_rsp_pdu,sizeof(conf_rsp_pdu));
L2CAP_Send_Upper_Layer_data(0x40,upper_layer_data,sizeof(upper_layer_data));
L2CAP_Send_SIG_Discon_Req(0x79,0x40,0x0806);
}