Slowlog中小于long_query_time时间设置的query
Mysql Version ：5.1.72
OS Version ：CentOS release 6.4 (Final)
说到慢查询，有点老生常谈了，但是慢查询相关的有个参数可能会被很多人忽略。
log_queries_not_using_indexes
这个参数设置当查询没有使用索引的情况下，是否记录到slowlog中。
模拟情景：
当前long_query_time = 1 && log_queries_not_using_indexes = on
运行一个全表扫描的sql：
当执行当前sql的时候，查看slowlog会发现，虽然long_query_time=1，但是这条sql仍然会被记录在slowlog中
图中看到query_time:0.001311秒
如果你使用的mysql版本大于5.6.5，也可以通过设置
log_throttle_queries_not_using_indexes
这个参数表示每分钟允许记录到slowlog且未使用索引的次数。默认值为0，标识没有限制。
相关文档（摘取Mysql 5.1官方文档）：
5.2.5 The Slow Query Log
The slow query log consists of SQL statements that took more than long_query_time seconds to execute and (as of MySQL 5.1.21) required at least min_examined_row_limit rows to be examined. The default value oflong_query_time is 10. Beginning with MySQL 5.1.21, the minimum is 0, and the value can be specified to a resolution of microseconds. For logging to a file, times are written including the microseconds part. For logging to tables, only integer times are written; the microseconds part is ignored. Prior to MySQL 5.1.21, the minimum value is 1, and the value for this variable must be an integer.
By default, administrative statements are not logged, nor are queries that do not use indexes for lookups. This behavior can be changed using --log-slow-admin-statements and --log-queries-not-using-indexes, as described later.
The time to acquire the initial locks is not counted as execution time. mysqld writes a statement to the slow query log after it has been executed and after all locks have been released, so log order might differ from execution order.
Control the slow query log at server startup as follows:
-
Before 5.1.6, the slow query log destination is always a file. To enable the log, start mysqld with the
--log-slow-queries[=option.file_name] -
As of MySQL 5.1.6, the destination can be a file or a table, or both. Start mysqld with the
--log-slow-queries[=option to enable the slow query log, and optionally usefile_name]--log-outputto specify the log destination (as described in Section 5.2.1, “Selecting General Query and Slow Query Log Output Destinations”). -
As of MySQL 5.1.12, as an alternative to
--log-slow-queries, use--slow_query_log[={0|1}]to specify the initial slow query log state. In this case, the default slow query log file name is used. With no argument or an argument of 1,--slow_query_logenables the log. With an argument of 0, this option disables the log. -
As of MySQL 5.1.29, use
--slow_query_log[={0|1}]to enable or disable the slow query log, and optionally--slow_query_log_file=to specify a log file name. Thefile_name--log-slow-queriesoption is deprecated.
If the slow query log file is enabled but no name is specified, the default name is host_name-slow.log
To disable or enable the slow query log or change the log file name at runtime, use the global slow_query_logand slow_query_log_file system variables. Set slow_query_log to 0 (or OFF) to disable the log or to 1 (or ON) to enable it. Set slow_query_log_file to specify the name of the log file. If a log file already is open, it is closed and the new file is opened.
When the slow query log is enabled, the server writes output to any destinations specified by the --log-outputoption or log_output system variable. If you enable the log, the server opens the log file and writes startup messages to it. However, further logging of queries to the file does not occur unless the FILE log destination is selected. If the destination is NONE, the server writes no queries even if the slow query log is enabled. Setting the log file name has no effect on logging if the log destination value does not contain FILE.
The server writes less information to the slow query log (and binary log) if you use the --log-short-formatoption.
To include slow administrative statements in the statements written to the slow query log, use the --log-slow-admin-statements server option. Administrative statements include ALTER TABLE, ANALYZE TABLE, CHECK TABLE, CREATE INDEX, DROP INDEX, OPTIMIZE TABLE, and REPAIR TABLE.
To include queries that do not use indexes for row lookups in the statements written to the slow query log, use the --log-queries-not-using-indexes server option. See Section 5.1.3, “Server Command Options”. When such queries are logged, the slow query log may grow quickly.
The server uses the controlling parameters in the following order to determine whether to write a query to the slow query log:
-
The query must either not be an administrative statement, or
--log-slow-admin-statementsmust have been specified. -
The query must have taken at least
long_query_timeseconds, or--log-queries-not-using-indexesmust have been specified and the query used no indexes for row lookups. -
The query must have examined at least
min_examined_row_limitrows.
The server does not write queries handled by the query cache to the slow query log, nor queries that would not benefit from the presence of an index because the table has zero rows or one row.
Prior to MySQL 5.1.45, replication slaves did not write replicated queries to the slow query log, even if the same queries were written to the slow query log on the master. (Bug #23300) In MySQL 5.1.45 and later, this behavior can be overridden using the --log-slow-slave-statements option.
The slow query log should be protected because logged statements might contain passwords. See Section 6.1.2.3, “Passwords and Logging”.
The slow query log can be used to find queries that take a long time to execute and are therefore candidates for optimization. However, examining a long slow query log can become a difficult task. To make this easier, you can process a slow query log file using the mysqldumpslow command to summarize the queries that appear in the log. See Section 4.6.8, “mysqldumpslow — Summarize Slow Query Log Files”.