中断处理
在 2.4 内核和 2.6内核中都使用 request_irq() 函数来注册中断服务函数。在 2.4 内核中,需要包含的头文件是 #include ,2.6 内核中需要包含的头文件则是 #include 。函数原型如下:
int request_irq (unsigned int irq, void (*handler)(int, void *, struct pt_regs *), unsigned long frags, const char *device, void *dev_id);
request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *name, void *dev);
在发生对应于第 1个参数 irq 的中断时,则调用第 2 个参数 handler 指定的中断服务函数(也就是把 handler() 中断服务函数注册到内核中 )。
第 3 个参数 flags 指定了快速中断或中断共享等中断处理属性。在 2.6 教新的内核里(我的是 2.6.27 ~ 2.6.31 ),在 linux/interrupt.h 中定义操作这个参数的宏如下:
/*
* These flags used only by the kernel as part of the
* irq handling routines.
*
* IRQF_DISABLED - keep irqs disabled when calling the action handler
* IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
* IRQF_SHARED - allow sharing the irq among several devices
* IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
* IRQF_TIMER - Flag to mark this interrupt as timer interrupt
* IRQF_PERCPU - Interrupt is per cpu
* IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
* IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
* registered first in an shared interrupt is considered for
* performance reasons)
*/
#define IRQF_DISABLED 0x00000020
#define IRQF_SAMPLE_RANDOM 0x00000040
#define IRQF_SHARED 0x00000080
#define IRQF_PROBE_SHARED 0x00000100
#define IRQF_TIMER 0x00000200
#define IRQF_PERCPU 0x00000400
#define IRQF_NOBALANCING 0x00000800
#define IRQF_IRQPOLL 0x00001000
早期一点的 2.6 内核这里一般以 SA_ 前缀开头,如:
SA_INTERRUPT 表示禁止其他中断;(对应于 IRQF_DISABLED )
SA_SHIRQ 表示共享相同的中断号 (对应于 IRQF_SHARED )
SA_SAMPLE_RANDOM 此宏会影响到 RANDOM 的处理( 对应于 IRQF_SAMPLE_RANDOM )。
第 4 个参数 name 通常是设备驱动程序的名称。改值用在 /proc/interrupt 系统 (虚拟) 文件上,或内核发生中断错误时使用。
第 5 个参数 dev_id 可作为共享中断时的中断区别参数,也可以用来指定中断服务函数需要参考的数据地址。
返回值:
函数运行正常时返回 0 ,否则返回对应错误的负值。
示例代码片段:
irqreturn_t
xxx_interrupt (
int
irq
,
void
*
dev_id)
{
...
return (
IRQ_HANDLED);
}
int
xxx_open (
struct
inode
*
inode
,
struct
file
*
filp)
{
if (
!
request_irq (
XXX_IRQ
,
xxx_interruppt
,
IRQF_DISABLED
,
"xxx"
,
NULL))
{
/*正常注册*/
}
return (
0);
}
如果登记成功,返回0,这时在/proc/interrupts文件中可以看你请求的中断。
http://huxiongwei.spaces.eepw.com.cn/articles/article/item/74756
http://blog.sina.com.cn/s/blog_484572870100ckei.html
http://www.groad.net/bbs/read.php?tid-1261.html