flag变量分析
尝试降低解码延时:CODEC_FLAG_LOW_DELAY
#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
h264 解码中
int ff_h264_set_parameter_from_sps(H264Context *h)
if (h->flags & CODEC_FLAG_LOW_DELAY ||
(h->sps.bitstream_restriction_flag &&
!h->sps.num_reorder_frames)) {
if (h->avctx->has_b_frames > 1 || h->delayed_pic[0])
av_log(h->avctx, AV_LOG_WARNING, "Delayed frames seen. "
"Reenabling low delay requires a codec flush.\n");
else
h->low_delay = 1;
}
结果
avcodec_decode_video2接收到SPS/PPS，和I帧码流之后，测试显示需要20毫秒之后，解码出图像，跟CODEC_FLAG_LOW_DELAY解码标志位，优化快速解码出图像，没有任何的效果
场景
目前使用2.3.6版本设置AVCodecContext的flags:
flags |= CODEC_FLAG_LOW_DELAY
没有任何的效果
2.3.6版本
avcodec.h (libavcodec) line 744 : #define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
/**
* @deprecated use the flag "naq" in the "mpv_flags" private option of the
* mpegvideo encoders
*/
#define CODEC_FLAG_NORMALIZE_AQP 0x00020000
#endif
#define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< Use interlaced DCT.
#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
4.0.2版本
avcodec.h (libavcodec) line 878 : #define AV_CODEC_FLAG_LOW_DELAY (1 << 19)
/* encoding support
These flags can be passed in AVCodecContext.flags before initialization.
Note: Not everything is supported yet.
*/
/**
* Force low delay.
*/
#define AV_CODEC_FLAG_LOW_DELAY (1 << 19)
debug变量分析
当设置AVCodecContext结构体debug字段为1的时候，将会打印如下的调试信息：1）对每一个分片打印详细记录 2）打印SPS/PPS参数值
这两项参数对于解码来说，相当重要，IDR帧是解码的关键，SPS/PPS记录了解码图像相关参数
代码剖析
1）static int h264_slice_init(H264Context *h, H264SliceContext *sl, const H2645NAL *nal)
if (h->avctx->debug & FF_DEBUG_PICT_INFO) {
av_log(h->avctx, AV_LOG_DEBUG,
"slice:%d %s mb:%d %c%s%s frame:%d poc:%d/%d ref:%d/%d qp:%d loop:%d:%d:%d weight:%d%s %s\n",
sl->slice_num,
(h->picture_structure == PICT_FRAME ? "F" : h->picture_structure == PICT_TOP_FIELD ? "T" : "B"),
sl->mb_y * h->mb_width + sl->mb_x,
av_get_picture_type_char(sl->slice_type),
sl->slice_type_fixed ? " fix" : "",
nal->type == H264_NAL_IDR_SLICE ? " IDR" : "",
h->poc.frame_num,
h->cur_pic_ptr->field_poc[0],
h->cur_pic_ptr->field_poc[1],
sl->ref_count[0], sl->ref_count[1],
sl->qscale,
sl->deblocking_filter,
sl->slice_alpha_c0_offset, sl->slice_beta_offset,
sl->pwt.use_weight,
sl->pwt.use_weight == 1 && sl->pwt.use_weight_chroma ? "c" : "",
sl->slice_type == AV_PICTURE_TYPE_B ? (sl->direct_spatial_mv_pred ? "SPAT" : "TEMP") : "");
}
打印：
slice:1 F mb:0 I IDR frame:0 poc:65536/65536 ref:0/0 qp:25 loop:1:0:0 weight:0
slice:1 F mb:0 P frame:4 poc:65540/65540 ref:1/1 qp:26 loop:1:0:0 weight:0
/* do all the per-slice initialization needed before we can start decoding the
* actual MBs */
2）int ff_h264_decode_picture_parameter_set(GetBitContext *gb, AVCodecContext *avctx, H264ParamSets *ps, int bit_length)
if (avctx->debug & FF_DEBUG_PICT_INFO) {
av_log(avctx, AV_LOG_DEBUG,
"pps:%u sps:%u %s slice_groups:%d ref:%u/%u %s qp:%d/%d/%d/%d %s %s %s %s\n",
pps_id, pps->sps_id,
pps->cabac ? "CABAC" : "CAVLC",
pps->slice_group_count,
pps->ref_count[0], pps->ref_count[1],
pps->weighted_pred ? "weighted" : "",
pps->init_qp, pps->init_qs, pps->chroma_qp_index_offset[0], pps->chroma_qp_index_offset[1],
pps->deblocking_filter_parameters_present ? "LPAR" : "",
pps->constrained_intra_pred ? "CONSTR" : "",
pps->redundant_pic_cnt_present ? "REDU" : "",
pps->transform_8x8_mode ? "8x8DCT" : "");
}
打印
pps:0 sps:0 CAVLC slice_groups:1 ref:1/1 qp:26/26/0/0 LPAR
3）int ff_h264_decode_seq_parameter_set(GetBitContext *gb, AVCodecContext *avctx, H264ParamSets *ps, int ignore_truncation)
if (avctx->debug & FF_DEBUG_PICT_INFO) {
static const char csp[4][5] = { "Gray", "420", "422", "444" };
av_log(avctx, AV_LOG_DEBUG,
"sps:%u profile:%d/%d poc:%d ref:%d %dx%d %s %s crop:%u/%u/%u/%u %s %s %"PRId32"/%"PRId32" b%d reo:%d\n",
sps_id, sps->profile_idc, sps->level_idc,
sps->poc_type,
sps->ref_frame_count,
sps->mb_width, sps->mb_height,
sps->frame_mbs_only_flag ? "FRM" : (sps->mb_aff ? "MB-AFF" : "PIC-AFF"),
sps->direct_8x8_inference_flag ? "8B8" : "",
sps->crop_left, sps->crop_right,
sps->crop_top, sps->crop_bottom,
sps->vui_parameters_present_flag ? "VUI" : "",
csp[sps->chroma_format_idc],
sps->timing_info_present_flag ? sps->num_units_in_tick : 0,
sps->timing_info_present_flag ? sps->time_scale : 0,
sps->bit_depth_luma,
sps->bitstream_restriction_flag ? sps->num_reorder_frames : -1
);
}
打印
sps:0 profile:66/42 poc:0 ref:1 120x68 FRM 8B8 crop:0/0/0/8 VUI 420 1800/90000 b8 reo:-1