定时器0的方式1 定时器1的方式1 数码管和led

#include
#define uchar unsigned char
#define uint unsigned int
sbit dula=P2^6;
sbit wela=P2^7;
sbit led1=P1^0;
uchar code table[]=
{
0x3f,0x06,0x5b,0x4f,0x66,
  0x6d,0x7d,0x07,0x7f,0x6f,
0x77,0x7c,0x39,0x5e,0x79,0x71
};
void delayms(uint);
void display(uchar,uchar);
uchar num,num1,num2,shi,ge;
void main()
{
 TMOD=0x01; //设置定时器0和1为工作方式1（00010001）
TH0=(65536-45872)/256; //装初值
TL0=(65536-45872)%256;
TH1=(65536-45872)/256; //装初值
TL1=(65536-45872)%256;
EA=1;
ET0=1;
ET1=1;
TR0=1;
TR1=1;
while(1)
{
display(shi,ge);
}
}


void display(uchar shi,uc