华三设备开启ssh管理

1)        配置SSH服务器 # 生成RSA密钥对。 

 system-view 
[Switch] public-key local create rsa 
The range of public key size is (512 ~ 2048). NOTES: If the key modulus is greater than 512, It will take a few minutes. Press CTRL+C to abort. 
Input the bits of the modulus[default = 1024]: Generating Keys... ++++++++ ++++++++++++++ +++++ ++++++++ 
# 生成DSA密钥对。 
[Switch] public-key local create dsa 
The range of public key size is (512 ~ 2048). NOTES: If the key modulus is greater than 512, It will take a few minutes. Press CTRL+C to abort. 
Input the bits of the modulus[default = 1024]: Generating Keys... 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 
+++++++++++++++++++++++++++++++++++ 
# 启动SSH服务器。 
[Switch] ssh server enable 
# 配置VLAN接口1的IP地址，客户端将通过该地址连接SSH服务器。 
[Switch] interface vlan-interface 1 
[Switch-Vlan-interface1] ip address 192.168.1.40 255.255.255.0 

[Switch-Vlan-interface1] quit 
# 设置SSH客户端登录用户界面的认证方式为AAA认证。 
[Switch] user-interface vty 0 4 
[Switch-ui-vty0-4] authentication-mode scheme 
# 设置Switch上远程用户登录协议为SSH。 
[Switch-ui-vty0-4] protocol inbound ssh [Switch-ui-vty0-4] quit 
# 创建本地用户client001，并设置用户访问的命令级别为3。 
[Switch] local-user client001 
[Switch-luser-client001] password simple aabbcc [Switch-luser-client001] service-type ssh 
[Switch-luser-client001] authorization-attribute level 3 [Switch-luser-client001] quit 
# 配置SSH用户client001的服务类型为Stelnet，认证方式为password认证。（此步骤可以不配置） 
[Switch] ssh user client001 service-type stelnet authentication-type password