pod lib lint 报错 Unable to find a specification for `AMap2DMap` depended upon by `DingtalkPod

执行 pod验证 报错如下

➜  DingtalkPod git:(2.0.0) ✗ pod lib lint --sources='https://github.com/AloneMonkey/MonkeyDevSpecs' --allow-warnings

 

-> DingtalkPod (2.0.0)

    - WARN  | description: The description is shorter than the summary.

    - ERROR | [iOS] unknown: Encountered an unknown error (Unable to find a specification for `AMap2DMap` depended upon by `DingtalkPod`) during validation.

 

[!] DingtalkPod did not pass validation, due to 1 error.

You can use the `--no-clean` option to inspect any issue.

 

 错误说了，不能找到 AMap2DMap 的验证格式

 原因是因为，我的pod 源是两个。 一个官方的pod 源（https://github.com/CocoaPods/Specs.gi）还有一个私有的pod 源（https://github.com/AloneMonkey/MonkeyDevSpecs）所以，验证时需要加上私有源，

 应该为

 pod lib lint --sources='https://github.com/AloneMonkey/MonkeyDevSpecs,https://github.com/CocoaPods/Specs.git' --use-libraries --allow-warnings

 

 

最后的最后，在上传github时，发现了 guthub 有文件大小限制100M 的限制。。。 坑私我啦

转载于:https://www.cnblogs.com/DafaRan/p/7660332.html