测试环境
写道
A:192.168.0.219 (ubuntu)
B:192.168.0.8 (FreeBsd)
不知道一个unix,一个linux行不行.keepalived好像对linux核心有要求.
二台机器都要做keepalived的配置呀..
keepalived是一个的IPVS包装和健康检查服务.FreeBSD的端口不支持keepalived的VRRP协议栈. :(
B:192.168.0.8 (FreeBsd)
不知道一个unix,一个linux行不行.keepalived好像对linux核心有要求.
二台机器都要做keepalived的配置呀..
keepalived是一个的IPVS包装和健康检查服务.FreeBSD的端口不支持keepalived的VRRP协议栈. :(
用linux双机测试,将来可以布署双linux主机
更改测试环境
写道
A:192.168.0.219 (ubuntu)
B:192.168.0.19 (CentOs)
这二台机已经互为主从
B:192.168.0.19 (CentOs)
这二台机已经互为主从
keepalived安装
写道
现在keepalived的最新版本是1.2.2
wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
tar zxvf keepalived-1.2.2.tar.gz
A(ubuntu)安装keepalived:
xiaofei@xiaofei-desktop:~/keepalived-1.2.2$ ./configure
configure: error:
!!! OpenSSL is not properly installed on your system. !!!
!!! Can not include OpenSSL headers files.
配置出错,提示openssl安装得不正确.
执行:sudo apt-get install libssl-dev 这个错误解决.又出现新的错误.
checking for poptGetContext in -lpopt... no
configure: error: Popt libraries is required
执行:sudo apt-get install libpopt-dev 解决
configure: creating ./config.status
config.status: creating Makefile
config.status: creating genhash/Makefile
config.status: WARNING: 'genhash/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating keepalived/core/Makefile
config.status: creating keepalived/include/config.h
config.status: creating keepalived.spec
config.status: creating keepalived/Makefile
config.status: WARNING: 'keepalived/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating lib/Makefile
config.status: creating keepalived/vrrp/Makefile
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto
Use IPVS Framework : No
IPVS sync daemon support : No
Use VRRP Framework : Yes
Use Debug flags : No
然后:make && sudo make install
xiaofei@xiaofei-desktop:~$ whereis keepalived
keepalived: /usr/local/sbin/keepalived /usr/local/etc/keepalived
B(CentOs)安装keepalived:
由于这台CentOs是台新机,需要安装的东西估计多了.
[root@centos keepalived-1.2.2]# ./configure
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/root/keepalived/keepalived-1.2.2':
configure: error: no acceptable C compiler found in $PATH
GCC错误 yum install gcc 解决
checking openssl/ssl.h usability... no
checking openssl/ssl.h presence... no
checking for openssl/ssl.h... no
configure: error:
!!! OpenSSL is not properly installed on your system. !!!
!!! Can not include OpenSSL headers files. !!!
OpenSSL错误 yum install openssl openssl-devel 解决
checking for poptGetContext in -lpopt... no
configure: error: Popt libraries is required
Popt错误 yum install popt popt-devel 解决
configure: creating ./config.status
config.status: creating Makefile
config.status: creating genhash/Makefile
config.status: WARNING: 'genhash/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating keepalived/core/Makefile
config.status: creating keepalived/include/config.h
config.status: creating keepalived.spec
config.status: creating keepalived/Makefile
config.status: WARNING: 'keepalived/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating lib/Makefile
config.status: creating keepalived/vrrp/Makefile
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto
Use IPVS Framework : No
IPVS sync daemon support : No
Use VRRP Framework : Yes
Use Debug flags : No
然后 make && make install 即可
[root@centos keepalived-1.2.2]# whereis keepalived
keepalived: /usr/local/sbin/keepalived /usr/local/etc/keepalived
wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
tar zxvf keepalived-1.2.2.tar.gz
A(ubuntu)安装keepalived:
xiaofei@xiaofei-desktop:~/keepalived-1.2.2$ ./configure
configure: error:
!!! OpenSSL is not properly installed on your system. !!!
!!! Can not include OpenSSL headers files.
配置出错,提示openssl安装得不正确.
执行:sudo apt-get install libssl-dev 这个错误解决.又出现新的错误.
checking for poptGetContext in -lpopt... no
configure: error: Popt libraries is required
执行:sudo apt-get install libpopt-dev 解决
configure: creating ./config.status
config.status: creating Makefile
config.status: creating genhash/Makefile
config.status: WARNING: 'genhash/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating keepalived/core/Makefile
config.status: creating keepalived/include/config.h
config.status: creating keepalived.spec
config.status: creating keepalived/Makefile
config.status: WARNING: 'keepalived/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating lib/Makefile
config.status: creating keepalived/vrrp/Makefile
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto
Use IPVS Framework : No
IPVS sync daemon support : No
Use VRRP Framework : Yes
Use Debug flags : No
然后:make && sudo make install
xiaofei@xiaofei-desktop:~$ whereis keepalived
keepalived: /usr/local/sbin/keepalived /usr/local/etc/keepalived
B(CentOs)安装keepalived:
由于这台CentOs是台新机,需要安装的东西估计多了.
[root@centos keepalived-1.2.2]# ./configure
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/root/keepalived/keepalived-1.2.2':
configure: error: no acceptable C compiler found in $PATH
GCC错误 yum install gcc 解决
checking openssl/ssl.h usability... no
checking openssl/ssl.h presence... no
checking for openssl/ssl.h... no
configure: error:
!!! OpenSSL is not properly installed on your system. !!!
!!! Can not include OpenSSL headers files. !!!
OpenSSL错误 yum install openssl openssl-devel 解决
checking for poptGetContext in -lpopt... no
configure: error: Popt libraries is required
Popt错误 yum install popt popt-devel 解决
configure: creating ./config.status
config.status: creating Makefile
config.status: creating genhash/Makefile
config.status: WARNING: 'genhash/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating keepalived/core/Makefile
config.status: creating keepalived/include/config.h
config.status: creating keepalived.spec
config.status: creating keepalived/Makefile
config.status: WARNING: 'keepalived/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating lib/Makefile
config.status: creating keepalived/vrrp/Makefile
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto
Use IPVS Framework : No
IPVS sync daemon support : No
Use VRRP Framework : Yes
Use Debug flags : No
然后 make && make install 即可
[root@centos keepalived-1.2.2]# whereis keepalived
keepalived: /usr/local/sbin/keepalived /usr/local/etc/keepalived
keepalived再次安装
写道
从先前安装keepalived我们看到,Use IPVS Framework:NO 应该要安装lvs
A:sudo apt-get install ipvsadm
B:yum install ipvsadm
A:
./configure --with-kernel-dir=/usr/src/linux-headers-2.6.32-41-generic
发现还有一个警告:
checking for nl_handle_alloc in -lnl... no
configure: WARNING: keepalived will be built without libnl support.
sudo apt-get install libnl-dev
重新编译了一次 包括make && make install
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use Debug flags : No
不知道有没有效..
B:
./configure --with-kernel-dir=/usr/src/kernels/2.6.32-220.el6.x86_64
checking for nl_handle_alloc in -lnl... no
configure: WARNING: keepalived will be built without libnl support.
yum install libnl-devel
还有错误
checking net/ip_vs.h usability... no
checking net/ip_vs.h presence... no
checking for net/ip_vs.h... no
configure: WARNING: keepalived will be built without LVS support.
yum install kernel-devel
安装完后kernel也变了 : 2.6.32-220.17.1.el6.x86_64
./configure --with-kernel-dir=/usr/src/kernels/2.6.32-220.17.1.el6.x86_64
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use Debug flags : No
接着make && make install
A:sudo apt-get install ipvsadm
B:yum install ipvsadm
A:
./configure --with-kernel-dir=/usr/src/linux-headers-2.6.32-41-generic
发现还有一个警告:
checking for nl_handle_alloc in -lnl... no
configure: WARNING: keepalived will be built without libnl support.
sudo apt-get install libnl-dev
重新编译了一次 包括make && make install
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use Debug flags : No
不知道有没有效..
B:
./configure --with-kernel-dir=/usr/src/kernels/2.6.32-220.el6.x86_64
checking for nl_handle_alloc in -lnl... no
configure: WARNING: keepalived will be built without libnl support.
yum install libnl-devel
还有错误
checking net/ip_vs.h usability... no
checking net/ip_vs.h presence... no
checking for net/ip_vs.h... no
configure: WARNING: keepalived will be built without LVS support.
yum install kernel-devel
安装完后kernel也变了 : 2.6.32-220.17.1.el6.x86_64
./configure --with-kernel-dir=/usr/src/kernels/2.6.32-220.17.1.el6.x86_64
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use Debug flags : No
接着make && make install
keepalived配置
我们自己在新建一个配置文件,默认情况下keepalived启动时会去/etc/keepalived目录下找配置文件
A:
cd /etc/keepalived
sudo vim keepalived.conf
我的内容:
!Configuration File for keepalived
global_defs {
notification_email {
[email protected]
}
notification_email_from [email protected]
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id MySQL-ha
}
vrrp_instance VI_1 {
state BACKUP #两台配置此处均是BACKUP
interface eth0
virtual_router_id 51
priority 100 #优先级,另一台改为90
advert_int 1
nopreempt #不抢占,只在优先级高的机器上设置即可,优先级低的机器不设置
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.200
}
}
virtual_server 192.168.0.200 3306 {
delay_loop 2 #每个2秒检查一次real_server状态
lb_algo wrr #LVS算法
lb_kind DR #LVS模式
persistence_timeout 60 #会话保持时间
protocol TCP
real_server 192.168.0.219 3306 {
weight 3
notify_down /usr/local/MySQL/bin/MySQL.sh #检测到服务down后执行的脚本
TCP_CHECK {
connect_timeout 10 #连接超时时间
nb_get_retry 3 #重连次数
delay_before_retry 3 #重连间隔时间
connect_port 3306 #健康检查端口
}
}
}
编写检测服务down后所要执行的脚本
cd /usr/local
mkdir MySQL
cd MySQL
mkdir bin
#sudo vim /usr/local/MySQL/bin/MySQL.sh
内容:
#!/bin/sh
pkill keepalived
放开权限:
#chmod +x /usr/local/MySQL/bin/MySQL.sh
注:此脚本是上面配置文件notify_down选项所用到的,keepalived使用notify_down选项来检查real_server的服务状态,当发现real_server服务故障时,便触发此脚本;
我们可以看到,脚本就一个命令,通过pkill keepalived强制杀死keepalived进程,从而实现了MySQL故障自动转移。
启动keepalived
#sudo /usr/local/sbin/keepalived –D
接着我们来ping一下我们设置的虚拟ip(192.168.0.200)
[root@centos etc]# ping 192.168.0.200
PING 192.168.0.200 (192.168.0.200) 56(84) bytes of data.
64 bytes from 192.168.0.200: icmp_seq=1 ttl=64 time=0.951 ms
64 bytes from 192.168.0.200: icmp_seq=2 ttl=64 time=0.173 ms
64 bytes from 192.168.0.200: icmp_seq=3 ttl=64 time=0.204 ms
64 bytes from 192.168.0.200: icmp_seq=4 ttl=64 time=0.175 ms
64 bytes from 192.168.0.200: icmp_seq=5 ttl=64 time=0.138 ms
此时keepalived状态是正在运行中
xiaofei@xiaofei-desktop:~$ ps ax | grep keepalived
17617 ? Ss 0:00 /usr/local/sbin/keepalived -D
17618 ? S 0:00 /usr/local/sbin/keepalived -D
17619 ? S 0:00 /usr/local/sbin/keepalived -D
17622 pts/1 S+ 0:00 grep --color=auto keepalived
我停掉该机的mysql服务: sudo /etc/init.d/mysql stop
再来看看keepallived的状态
xiaofei@xiaofei-desktop:~$ ps ax | grep keepalived
17669 pts/1 S+ 0:00 grep --color=auto keepalived
我们发现当keepalived发现服务不响应时,自动杀死了keepalived进程...
B: B的配置跟A一样,只是keepalived.conf文件有三个地方与A不同 : 优先级为90、无抢占设置、real_server为本机IP
测试一下
一直不成功,查看日志 tail -f /var/log/message
Jun 6 16:15:59 centos Keepalived_healthcheckers: Opening file '/etc/keepalived/keepalived.conf'.
Jun 6 16:15:59 centos Keepalived_healthcheckers: Configuration is using : 11671 Bytes
Jun 6 16:15:59 centos Keepalived: Healthcheck child process(20866) died: Respawning
Jun 6 16:15:59 centos Keepalived: Starting Healthcheck child process, pid=20868
Jun 6 16:15:59 centos Keepalived_healthcheckers: IPVS: Can't initialize ipvs: Protocol not available
Jun 6 16:15:59 centos Keepalived_healthcheckers: Registering Kernel netlink reflector
Jun 6 16:15:59 centos Keepalived_healthcheckers: Registering Kernel netlink command channel
A服务器中的日志是这样:
Jun 6 16:18:02 xiaofei-desktop Keepalived_vrrp: VRRP_Instance(VI_1) Received lower prio advert, forcing new election
Jun 6 16:18:02 xiaofei-desktop Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
Jun 6 16:18:03 xiaofei-desktop Keepalived_vrrp: VRRP_Instance(VI_1) Received lower prio advert, forcing new election
Jun 6 16:18:03 xiaofei-desktop Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
IPVS: Can't initialize ipvs: Protocol not available,应该是这个原因...
GG一下:打个补丁 modprobe -q ip_vs||true
再看日志:
Jun 6 16:30:30 centos Keepalived_healthcheckers: Configuration is using : 11651 Bytes
Jun 6 16:30:30 centos Keepalived_vrrp: VRRP_Instance(VI_1) Entering BACKUP STATE
Jun 6 16:30:30 centos Keepalived_vrrp: VRRP sockpool: [ifindex(2), proto(112), fd(10,11)]
Jun 6 16:30:30 centos Keepalived_healthcheckers: Using LinkWatch kernel netlink reflector...
Jun 6 16:30:30 centos Keepalived_healthcheckers: Activating healtchecker for service [192.168.0.19]:3306
Jun 6 16:30:34 centos Keepalived_vrrp: VRRP_Instance(VI_1) Transition to MASTER STATE
Jun 6 16:30:35 centos Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Jun 6 16:30:35 centos Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Jun 6 16:30:35 centos Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
Jun 6 16:30:35 centos avahi-daemon[1417]: Registering new address record for 192.168.0.200 on eth0.IPv4.
Jun 6 16:30:40 centos Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
好像没提示错误了.
停掉B服务器的mysql服务之后,也自动杀死了keepalived进程...
keepalived测试
写道
测试一:
当我停掉A服务器的mysql服务之后,ping 192.168.0.200还是正常的;
当我再停B服务器的mysql服务之后,ping 192.2168.0.200就不通了;
当我打开B服务器的mysql服务之后,又通了;
测试二:
用第三台机(192.168.0.6)mysql远程登陆192.168.0.200
首先还是得在219及19的机器上设置允许远程登陆;
grant select on *.* to 'remote_guest'@'%' identified by '123456';
暂时先在这二台机器上创建remote_guest这个帐号,给select权限测试;
ssh 192.168.0.6
> mysql -h192.168.0.200 -uremote_guest -p123456
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2271
Server version: 5.5.24-log MySQL Community Server (GPL)
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
通过查看我知道这时进的mysql是192.168.0.219的..
接着我们来进行故障测试,停掉A的mysql服务
mysql -h192.168.0.200 -uremote_guest -p123456
ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.0.200' (60)
有错误,没能连到19的服务器
直接通过 mysql -h192.168.0.19 -uremote_guest -p123456 -P3306
是可以连到19的mysql的,帐号建立的是没有问题.
A当掉后,B没有接管
[root@centos ~]# tail -f /var/log/messages
Jun 6 17:30:41 centos Keepalived_healthcheckers: Using LinkWatch kernel netlink reflector...
Jun 6 17:30:41 centos Keepalived_healthcheckers: Activating healtchecker for service [192.168.0.19]:3306
Jun 6 17:30:45 centos Keepalived_vrrp: VRRP_Instance(VI_1) Transition to MASTER STATE
Jun 6 17:30:46 centos Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Jun 6 17:30:46 centos Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Jun 6 17:30:46 centos Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
Jun 6 17:30:46 centos avahi-daemon[1417]: Registering new address record for 192.168.0.200 on eth0.IPv4.
Jun 6 17:30:51 centos Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
Jun 6 17:57:45 centos dmeventd[20127]: dmeventd ready for processing.
Jun 6 17:57:45 centos lvm[20127]: Monitoring snapshot 2wd1gdisk-vm--snapshot
什么lvm,不会是你也在这台机上搞,搞得我搞坏了吧 跟我先前的日志都不一样了
今天又试了一下 在192.168.0.6 上 mysql -h192.168.0.200 -uremote_guest -p123456
居然连上了,进的就是19的mysql
我再接着把A服务器的mysql服务启用,这个时候应该还是只会一直连接B数据库....... OK
接着再断掉B服务器,看能不能自动切到A服务器.......OK
-------
虽然A,B是互为主从,但还是以A为主,只是这种方式切换,当切换到B后,A恢复正常后不能再自动切回A.
keepalived只能做到对3306的健康检查,但是做不到比如像MySQL复制中的slave-SQL、slave-IO进程的检查。
所以要想做到一些细致的健康检查,还得需要借助额外的监控工具,比如nagios,然后用nagios实现短信、邮件报警,从而能够有效地解决问题。
当我停掉A服务器的mysql服务之后,ping 192.168.0.200还是正常的;
当我再停B服务器的mysql服务之后,ping 192.2168.0.200就不通了;
当我打开B服务器的mysql服务之后,又通了;
测试二:
用第三台机(192.168.0.6)mysql远程登陆192.168.0.200
首先还是得在219及19的机器上设置允许远程登陆;
grant select on *.* to 'remote_guest'@'%' identified by '123456';
暂时先在这二台机器上创建remote_guest这个帐号,给select权限测试;
ssh 192.168.0.6
> mysql -h192.168.0.200 -uremote_guest -p123456
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2271
Server version: 5.5.24-log MySQL Community Server (GPL)
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
通过查看我知道这时进的mysql是192.168.0.219的..
接着我们来进行故障测试,停掉A的mysql服务
mysql -h192.168.0.200 -uremote_guest -p123456
ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.0.200' (60)
有错误,没能连到19的服务器
直接通过 mysql -h192.168.0.19 -uremote_guest -p123456 -P3306
是可以连到19的mysql的,帐号建立的是没有问题.
A当掉后,B没有接管
[root@centos ~]# tail -f /var/log/messages
Jun 6 17:30:41 centos Keepalived_healthcheckers: Using LinkWatch kernel netlink reflector...
Jun 6 17:30:41 centos Keepalived_healthcheckers: Activating healtchecker for service [192.168.0.19]:3306
Jun 6 17:30:45 centos Keepalived_vrrp: VRRP_Instance(VI_1) Transition to MASTER STATE
Jun 6 17:30:46 centos Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Jun 6 17:30:46 centos Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Jun 6 17:30:46 centos Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
Jun 6 17:30:46 centos avahi-daemon[1417]: Registering new address record for 192.168.0.200 on eth0.IPv4.
Jun 6 17:30:51 centos Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.0.200
Jun 6 17:57:45 centos dmeventd[20127]: dmeventd ready for processing.
Jun 6 17:57:45 centos lvm[20127]: Monitoring snapshot 2wd1gdisk-vm--snapshot
什么lvm,不会是你也在这台机上搞,搞得我搞坏了吧 跟我先前的日志都不一样了
今天又试了一下 在192.168.0.6 上 mysql -h192.168.0.200 -uremote_guest -p123456
居然连上了,进的就是19的mysql
我再接着把A服务器的mysql服务启用,这个时候应该还是只会一直连接B数据库....... OK
接着再断掉B服务器,看能不能自动切到A服务器.......OK
-------
虽然A,B是互为主从,但还是以A为主,只是这种方式切换,当切换到B后,A恢复正常后不能再自动切回A.
keepalived只能做到对3306的健康检查,但是做不到比如像MySQL复制中的slave-SQL、slave-IO进程的检查。
所以要想做到一些细致的健康检查,还得需要借助额外的监控工具,比如nagios,然后用nagios实现短信、邮件报警,从而能够有效地解决问题。