SIM300 基本命令集

//基本命令集 //------------------------------------------------------------------ const romchar AT_AT[] = {"AT/r/n"}; const romchar AT_CBC[] ={"AT+CBC/r/n"};   //检查充电状态，以及电池电量占容量的百分比+CBC: 0,97,4164 const romchar AT_CREG[] = {"AT+CREG?/r/n"}; //查询网络注册状态 const romchar AT_CREGINIT[] = {"AT+CREG=1/r/n"}; //初始化网络注册状态 const romchar AT_ATE[] = {"ATE0/r/n"};   //存储当前的设置参数 const romchar AT_Save[] = {"AT&W/r/n"};   //存储当前的参数 //0 disable slow clock   1 enable slow clock const romchar AT_CSCLK[] = {"AT+CSCLK=1/r/n"}; //enable slow clock //0 minimum functionality 1 full functionality (Default) 4 disable phone both transmit and receive RF circuits const romchar AT_CFUN[] = {"AT+CFUN=1/r/n"}; //使模块在重启后电源进入功能性的电平 const romchar AT_CGMR[] = {"AT+CGMR/r/n"}; //软件版本标识 const romchar AT_CCID[] = {"AT+CCID/r/n"}; //获得SIM卡标识 const romchar AT_CGSN[]={"AT+CGSN/r/n"}; //IMEI const romchar AT_CSQ[]={"AT+CSQ/r/n"}; //信号强度 const romchar AT_CSMINS[]={"AT+CSMINS?/r/n"}; //检测SIM卡是否插入+CSMINS: 0,1 const romchar AT_COPS[]={"AT+COPS?/r/n"}; const romchar AT_CPOL[]={"AT+CPOL?/r/n"}; const romchar AT_REG_COPS[]={"AT+CPOL=1,2,/""}; //****************************************************************************** //SMS命令集 //------------------------------------------------------------------ const romchar AT_CMGF[] = {"AT+CMGF=1/r/n"}; //指定信息的输入输出格式为文本格式 const romchar AT_CMGFNMEA[] = {"AT+CMGF=0/r/n"}; //指定信息的输入输出格式为PDU格式 const romchar AT_CSCS[] = {"AT+CSCS=/"GSM/"/r/n"}; //AT+CSCS=“GSM”设置什么样的字体让模块接受 const romchar AT_CMGS[] = {"AT+CMGS=/""}; //发短信 const romchar AT_CMGR[] = {"/r/nAT+CMGR="}; //读短信 const romchar AT_CMGD1[] = {"AT+CMGD=1/r/n"};    //删除短信 const romchar AT_CMGD2[] = {"AT+CMGD=2/r/n"};    //删除短信 const romchar AT_CMGD3[] = {"AT+CMGD=3/r/n"};    //删除短信 const romchar AT_CMGD4[] = {"AT+CMGD=4/r/n"};    //删除短信 const romchar AT_CMGD5[] = {"AT+CMGD=5/r/n"};    //删除短信 const romchar AT_CMGD6[] = {"AT+CMGD=6/r/n"};    //删除短信 const romchar AT_CMGD7[] = {"AT+CMGD=7/r/n"};    //删除短信 const romchar AT_CMGD8[] = {"AT+CMGD=8/r/n"};    //删除短信 const romchar AT_CMGD9[] = {"AT+CMGD=9/r/n"};    //删除短信 const romchar AT_CNMI[] = {"AT+CNMI=2,1/r/n"};   // ？    初始化AT指令时要用上 const romchar AT_CMGL[] = {"AT+CMGL=/"REC UNREAD/"/r/n"}; //接收没有读的信息 //const romchar AT_CSMP[] = {"AT+CSMP=17，167，0，240 /r/n"}; //const romchar AT_IFC[] = {"AT+IFC=2，2 /r/n"}; //建立数据呼叫，通过RTS和CTS控制 //const romchar AT_CBST[] = {"AT+CBST=0，0, 1 /r/n"}; //------------------------------------------------------------------ //GPRS命令集 //------------------------------------------------------------------ const romchar Gprs_class[] = {"AT+CGCLASS=/"B/"/r/n"}; //length = 16B 显示GPRS信息移动的类型   const romchar Gprs_apn[] = {"AT+CSTT=/""};     //GPRS通用的名字 const romchar Gprs_CSTT[]={"AT+CIPCSGP=1,/""}; //设置GPRS为无线连接的模式 const romchar Gprs_cgatt[] = {"AT+CGATT=1/r/n"}; //length = 12B显示GPRS配置是附加的 const romchar Gprs_cgreg[] = {"AT+CGREG?/r/n"}; //查询GPRS网络注册状态 const romchar Gprs_cgreginit[] = {"AT+CGREG=1/r/n"}; //初始化GPRS网络注册状态 const romchar Gprs_T_S[] = {"AT+CIPSTART=/"TCP/",/""}; //建立TCP连接;连接成功反馈CONNECT OK const romchar Gprs_U_S[] = {"AT+CIPSTART=/"UDP/",/""}; //建立UDP连接 const romchar Gprs_ipshut[] = {"AT+CIPSHUT/r/n"}; //   //使GPRS的PDP失效 const romchar Gprs_send[] = {"AT+CIPSEND/r/n"}; //发送数据； const romchar Gprs_dpdp[] = {"AT+CIPDPDP=1,60,3/r/n"}; //自动检测GPRS是否为附着状态；60毫秒，检测3次 const romchar SetBand[]= "AT+IPR=9600/r/n";     //设置与终端设备通信的波特率为9600 //------------------------------------------------------------------ //通话命令集 //------------------------------------------------------------------ const romchar Gsm_cmd_call_view[] = {"AT+CLIP=1/r/n"}; //使能来电显示 const romchar Gsm_P_ATD[] = {"/r/nATD"}; //拨号 const romchar Gsm_cmd_call_ack[] = {"ATA/r/n"}; //接通 const romchar Gsm_call_connect[] = {"AT+CLCC/r/n"}; //查询是否接通 const romchar Gsm_cmd_call_noack[] = {"ATH/r/n"}; //挂断 const romchar Gsm_cmd_call_sel[] = {"AT+CHFA=0/r/n"}; //选主通道 const romchar Gsm_cmd_call_CMIC[] = {"AT+CMIC=0,9/r/n"}; //MIC增益+13.5dB,选择主麦克风 const romchar Gsm_cmd_call_CLVL[] = {"AT+CLVL=90/r/n"}; //受话器音量级别 const romchar Gsm_cmd_Voice_num1[] = {"AT+VTS=1/r/n"}; //拨号键3 const romchar Gsm_cmd_Voice_num2[] = {"AT+VTS=2/r/n"}; //拨号键3 const romchar Gsm_cmd_Voice_num3[] = {"AT+VTS=3/r/n"}; //拨号键3 const romchar Gsm_cmd_Voice_num4[] = {"AT+VTS=4/r/n"}; //拨号键3 const romchar Gsm_cmd_Voice_num5[] = {"AT+VTS=5/r/n"}; //拨号键3 const romchar Gsm_cmd_Voice_num6[] = {"AT+VTS=6/r/n"}; //拨号键3 const romchar AT_VTS[] = {"AT+VTS=/r/n"}; //Send DTMF const romchar ATMicOn[]="AT+CMUT=0/r/n";   const romchar ATMicOff[]="AT+CMUT=1/r/n"; const romchar Gsm_cmd_Turn_Off[] = {"AT+CPOWD=1/r/n"}; //关模块命令