Flume 企业案例之负载均衡和故障转移

案例使用Flume1监控一个端口，其sink组中的sink分别对接Flume2和Flume3，采用FailoverSinkProcessor，实现故障转移的功能。

）实现步骤
0.准备工作
在/opt/module/flume/job目录下创建group2文件夹
[@hadoop102 job]$ cd group2/
1.创建flume-netcat-flume.conf
配置1个netcat source和1个channel、1个sink group（2个sink），分别输送给flume-flume-console1和flume-flume-console2。
编辑配置文件
[@hadoop102 group2]$ vim flume-netcat-flume.conf
添加如下内容

# Name the components on this agent
a1.sources = r1
a1.channels = c1
a1.sinkgroups = g1
a1.sinks = k1 k2

# Describe/configure the source
a1.sources.r1.type = netcat
a1.sources.r1.bind = localhost
a1.sources.r1.port = 44444

a1.sinkgroups.g1.processor.type = failover
a1.sinkgroups.g1.processor.priority.k1 = 5
a1.sinkgroups.g1.processor.priority.k2 = 10
a1.sinkgroups.g1.processor.maxpenalty = 10000

# Describe the sink
a1.sinks.k1.type = avro
a1.sinks.k1.hostname = hadoop102
a1.sinks.k1.port = 4141

a1.sinks.k2.type = avro
a1.sinks.k2.hostname = hadoop102
a1.sinks.k2.port = 4142

# Describe the channel
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

# Bind the source and sink to the channel
a1.sources.r1.channels = c1
a1.sinkgroups.g1.sinks = k1 k2
a1.sinks.k1.channel = c1
a1.sinks.k2.channel = c1

2.创建flume-flume-console1.conf
配置上级Flume输出的Source，输出是到本地控制台。
编辑配置文件
[*****@hadoop102 group2]$ vim flume-flume-console1.conf
添加如下内容

# Name the components on this agent
a2.sources = r1
a2.sinks = k1
a2.channels = c1

# Describe/configure the source
a2.sources.r1.type = avro
a2.sources.r1.bind = hadoop102
a2.sources.r1.port = 4141

# Describe the sink
a2.sinks.k1.type = logger

# Describe the channel
a2.channels.c1.type = memory
a2.channels.c1.capacity = 1000
a2.channels.c1.transactionCapacity = 100

# Bind the source and sink to the channel
a2.sources.r1.channels = c1
a2.sinks.k1.channel = c1

3.创建flume-flume-console2.conf
配置上级Flume输出的Source，输出是到本地控制台。
编辑配置文件
[*****@hadoop102 group2]$ vim flume-flume-console2.conf
添加如下内容

# Name the components on this agent
a3.sources = r1
a3.sinks = k1
a3.channels = c2

# Describe/configure the source
a3.sources.r1.type = avro
a3.sources.r1.bind = hadoop102
a3.sources.r1.port = 4142

# Describe the sink
a3.sinks.k1.type = logger

# Describe the channel
a3.channels.c2.type = memory
a3.channels.c2.capacity = 1000
a3.channels.c2.transactionCapacity = 100

# Bind the source and sink to the channel
a3.sources.r1.channels = c2
a3.sinks.k1.channel = c2

4.执行配置文件
分别开启对应配置文件：flume-flume-console2，flume-flume-console1，flume-netcat-flume。
[*****@hadoop102 flume]$ bin/flume-ng agent --conf conf/ --name a3 --conf-file job/group2/flume-flume-console2.conf -Dflume.root.logger=INFO,console

[*****@hadoop102 flume]$ bin/flume-ng agent --conf conf/ --name a2 --conf-file job/group2/flume-flume-console1.conf -Dflume.root.logger=INFO,console

[*****@hadoop102 flume]$ bin/flume-ng agent --conf conf/ --name a1 --conf-file job/group2/flume-netcat-flume.conf
5.使用netcat工具向本机的44444端口发送内容
$ nc localhost 44444
6.查看Flume2及Flume3的控制台打印日志
7.将Flume2 kill，观察Flume3的控制台打印情况。