这篇文章描述了如何创建一个IoT项目,该项目使用Arduino通过Temboo和Parse.com将推送消息发送到Android智能手机 。 例如,我们将构建一个基于Arduino和Android的警报系统,这是一个有趣的物联网(IoT)示例,并且该项目的目的是使用连接到Arduino板上 的红外传感器(PIR)来构建警报 将消息推送到Android智能手机 。 该项目融合了不同的技术和平台,我们使它们一起工作!
警报系统使用两个平台来简化项目:
- 滕博
- Parse.com
物联网项目概述
在深入研究该项目之前,描述这两个平台非常有用。
Temboo是一个平台,具有一组“连接器”,可用于与其他平台或服务提供商(例如eBay,Yahoo!Weather,Google等)交换数据。 Temboo有趣的部分是它与
Arduino开发板 ,以便这些连接器可以在Arduino上导出。
Parse.com是我们在上一篇文章中使用的平台,用于发送android push消息 。
物联网项目的主要概述如下所示:
显而易见,构建物联网项目由多个部分组成。 第一部分是带有PIR传感器的Arduino板,用于检测运动 。 Arduino运行一个Temboo代理 ,该代理将数据发送到Parse平台 。 当Arduino数字输入之一变高时触发此代理。 Temboo平台用于创建代理,而无需编写过多的代码行。 借助Temboo choreo ,Arduino可以将JSON数据直接发送到Parse.com,后者再将推送消息发送到我们的智能手机。
Arduino素描
第一步是设置使用PIR传感器的Arduino草图并对其进行测试。 此步骤非常简单,我们必须使用三根电线将传感器连接到Arduino板:电源,接地和信号。
传感器非常简单 ,检测到运动时输出就很高。 对于此示例,我们可以假设它连接在数字引脚8上 。
要检查我们的传感器是否正常工作,并以正确的方式将其连接到Arduino板,以便它检测到运动,请尝试将此代码加载到arduino中:
int stato = 0;
void setup() {
// put your setup code here, to run once:
Serial.begin(9600);
pinMode(8, INPUT);
}
void loop() {
// put your main code here, to run repeatedly:
stato = digitalRead(8);
Serial.println(stato);
delay(500);
}
现在运行代码,将手移到传感器前面,看一下串行监视器以检查其是否有效!
现在,Arduino组件已准备就绪!
Temboo choreo
下一步是设置将Arduino开发板连接到Parse.com的代理。 在这种情况下,我们需要一个以太网屏蔽将Arduino连接到互联网 。 我用过Wiznet W5500 。 创建帐户后,就可以配置Temboo杂务了 。 我们想将Arduino连接到Parse,所以我们检查Parse-> Push Notification 。 解析杂项需要一些信息,然后再使用:
- 申请编号
- RestAPI密钥
这两个参数用于将代理连接到Parse.com。 您可以在Parse.com中找到以下信息:
您必须将所需的密钥复制到Temboo中:
好,我们准备好了。 如果您愿意,可以尝试从Temboo发送通知到Parse.com。
现在设置控制代理的触发器:
最后, Temboo将创建可立即使用的Arduino代码 !! 最后将代码复制并粘贴到您的Arduino IDE中。
Temboo生成的代码如下所示:
#include
#include
#include
#include
#include
#include
#include "TembooAccount.h" // Contains Temboo account information
byte ethernetMACAddress[] = ETHERNET_SHIELD_MAC;
EthernetClient client;
// The number of times to trigger the action if the condition is met
// We limit this so you won't use all of your Temboo calls while testing
int maxCalls = 10;
// The number of times this Choreo has been run so far in this sketch
int calls = 0;
int inputPin = 8;
IPAddress ip(192, 168, 1, 130); // Arduino IP Add
void setup() {
Serial.begin(9600);
// For debugging, wait until the serial console is connected
delay(4000);
while(!Serial);
Ethernet.begin(ethernetMACAddress, ip) ;
Serial.println("OK");
delay(5000);
// Initialize pins
pinMode(inputPin, INPUT);
Serial.println("Setup complete.\n");
}
void loop() {
int sensorValue = digitalRead(inputPin);
Serial.println("Sensor: " + String(sensorValue));
if (sensorValue == HIGH) {
if (calls < maxCalls) {
Serial.println("\nTriggered! Calling SendNotification Choreo...");
runSendNotification(sensorValue);
calls++;
} else {
Serial.println("\nTriggered! Skipping to save Temboo calls. Adjust maxCalls as required.");
}
}
delay(250);
}
void runSendNotification(int sensorValue) {
TembooChoreo SendNotificationChoreo(client);
// Set Temboo account credentials
SendNotificationChoreo.setAccountName(TEMBOO_ACCOUNT);
SendNotificationChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
SendNotificationChoreo.setAppKey(TEMBOO_APP_KEY);
// Set profile to use for execution
SendNotificationChoreo.setProfile("ParseAccount");
// Set Choreo inputs
String NotificationValue = "{\"channel\": \"temboo\", \"type\": \"android\", \"data\": {\"message\": \"This is a test alert!\"}}";
SendNotificationChoreo.addInput("Notification", NotificationValue);
// Identify the Choreo to run
SendNotificationChoreo.setChoreo("/Library/Parse/PushNotifications/SendNotification");
// Run the Choreo
unsigned int returnCode = SendNotificationChoreo.run();
// Read and print the error message
while (SendNotificationChoreo.available()) {
char c = SendNotificationChoreo.read();
Serial.print(c);
}
Serial.println();
SendNotificationChoreo.close();
}
配置Parse.com频道并构建Android应用
Temboo要求我们使用“ 解析”通道发送通知 。 然后,我们必须修改我们的Android应用程序,以使用频道来监听传入的通知。 如果您不知道如何编写处理推送消息的android应用程序,则可以阅读我以前的文章,其中介绍了如何通过Parse.com发送android推送消息 。
以这种方式稍微修改ParseTutorialApplication.java
:
@Override
public void onCreate() {
super.onCreate();
System.out.println("Application");
Parse.initialize(this, "sfFzOxotpsdOHWJE3nMmD0erLgFoecttKvC9CzIc", "nwbMEy7l4STpyNrABdrQxpEjdKIynSbuec56QbEz");
ParseInstallation.getCurrentInstallation().saveInBackground();
ParsePush.subscribeInBackground("temboo");
}
其中temboo
是通道。
我们准备好了!! 运行该应用程序并将您的手移到传感器附近, Arduino将向Android智能手机发送推送消息 !
最终结果如下所示:
在本文的最后,您将了解如何使用Arduino和Android构建IoT项目,以及如何通过Temboo和Parse.com整合这两个生态系统 。
翻译自: https://www.javacodegeeks.com/2015/09/iot-project-arduino-sends-push-notification-to-android-using-temboo-parse-com.html