go micro client

micro.newService()中newOptions

func newOptions(opts ...Option) Options {
    opt := Options{
        Auth:      auth.DefaultAuth,
        Broker:    broker.DefaultBroker,
        Cmd:       cmd.DefaultCmd,
        Config:    config.DefaultConfig,
        Client:    client.DefaultClient,
        Server:    server.DefaultServer,
        Store:     store.DefaultStore,
        Registry:  registry.DefaultRegistry,
        Router:    router.DefaultRouter,
        Runtime:   runtime.DefaultRuntime,
        Transport: transport.DefaultTransport,
        Context:   context.Background(),
        Signal:    true,
    }

    for _, o := range opts {
        o(&opt)
    }

    return opt
}

初始化了一堆基础设置，来看看Client, client.DefaultClient,
这里不要直接去看client/client.go中的newRpcClient()，因为在micro/defaults.go中已经初始化了client，默认是grpc
client.DefaultClient = gcli.NewClient()

func newClient(opts ...client.Option) client.Client {
    options := client.NewOptions()
    // default content type for grpc
    options.ContentType = "application/grpc+proto"

    for _, o := range opts {
        o(&options)
    }

    rc := &grpcClient{
        opts: options,
    }
    rc.once.Store(false)

    rc.pool = newPool(options.PoolSize, options.PoolTTL, rc.poolMaxIdle(), rc.poolMaxStreams())

    c := client.Client(rc)

    // wrap in reverse
    for i := len(options.Wrappers); i > 0; i-- {
        c = options.Wrappers[i-1](c)
    }

    return c
}

func NewClient(opts ...client.Option) client.Client {
    return newClient(opts...)
}

这里做了以下事情

1. 初始化并设置options，设置ContentType为"application/grpc+proto"
2. 实例化grpcClient{}
3. 依次调用client Wrapper中间件,注意是倒着调用哦

type grpcClient struct {
    opts client.Options
    pool *pool
    once atomic.Value
}

// Client is the interface used to make requests to services.
// It supports Request/Response via Transport and Publishing via the Broker.
// It also supports bidirectional streaming of requests.
type Client interface {
    Init(...Option) error
    Options() Options
    NewMessage(topic string, msg interface{}, opts ...MessageOption) Message
    NewRequest(service, endpoint string, req interface{}, reqOpts ...RequestOption) Request
    Call(ctx context.Context, req Request, rsp interface{}, opts ...CallOption) error
    Stream(ctx context.Context, req Request, opts ...CallOption) (Stream, error)
    Publish(ctx context.Context, msg Message, opts ...PublishOption) error
    String() string
}

newClient()中的c := client.Client(rc)说明一下,

grpcClient只有3个属性，client.Client(rc)调用一下，让rc变转Client的实例，在grpc.go中也可以看到grpcClient实现了Client定义的全部方法

结合实例看example/client/main.go中call()，发起请求

func call(i int, c client.Client) {
    // Create new request to service go.micro.srv.example, method Example.Call
    req := c.NewRequest("go.micro.srv.example", "Example.Call", &example.Request{
        Name: "John",
    })

    // create context with metadata
    ctx := metadata.NewContext(context.Background(), map[string]string{
        "X-User-Id": "john",
        "X-From-Id": "script",
    })

    rsp := &example.Response{}

    // Call service
    if err := c.Call(ctx, req, rsp); err != nil {
        fmt.Println("call err: ", err, rsp)
        return
    }

    fmt.Println("Call:", i, "rsp:", rsp.Msg)
}

func (g *grpcClient) NewRequest(service, method string, req interface{}, reqOpts ...client.RequestOption) client.Request {
    return newGRPCRequest(service, method, req, g.opts.ContentType, reqOpts...)
}

func newGRPCRequest(service, method string, request interface{}, contentType string, reqOpts ...client.RequestOption) client.Request {
    var opts client.RequestOptions
    for _, o := range reqOpts {
        o(&opts)
    }

    // set the content-type specified
    if len(opts.ContentType) > 0 {
        contentType = opts.ContentType
    }

    return &grpcRequest{
        service:     service,
        method:      method,
        request:     request,
        contentType: contentType,
        opts:        opts,
    }
}

NewRequest()最终得到一个grpcRequest{}实例,然后调用grpcClient.Call()
ctx可以附加信息(放在请求的header中)，在请求周期中都可获取，trace，auth等组件都可以使用

func (g *grpcClient) Call(ctx context.Context, req client.Request, rsp interface{}, opts ...client.CallOption) error {
    if req == nil {
        return errors.InternalServerError("go.micro.client", "req is nil")
    } else if rsp == nil {
        return errors.InternalServerError("go.micro.client", "rsp is nil")
    }
    // make a copy of call opts
    callOpts := g.opts.CallOptions
    for _, opt := range opts {
        opt(&callOpts)
    }

    // check if we already have a deadline
    d, ok := ctx.Deadline()
    if !ok {
        // no deadline so we create a new one
        var cancel context.CancelFunc
        ctx, cancel = context.WithTimeout(ctx, callOpts.RequestTimeout)
        defer cancel()
    } else {
        // got a deadline so no need to setup context
        // but we need to set the timeout we pass along
        opt := client.WithRequestTimeout(time.Until(d))
        opt(&callOpts)
    }

    // should we noop right here?
    select {
    case <-ctx.Done():
        return errors.New("go.micro.client", fmt.Sprintf("%v", ctx.Err()), 408)
    default:
    }

    // make copy of call method
    gcall := g.call

    // wrap the call in reverse
    for i := len(callOpts.CallWrappers); i > 0; i-- {
        gcall = callOpts.CallWrappers[i-1](gcall)
    }

    // return errors.New("go.micro.client", "request timeout", 408)
    call := func(i int) error {
        // call backoff first. Someone may want an initial start delay
        t, err := callOpts.Backoff(ctx, req, i)
        if err != nil {
            return errors.InternalServerError("go.micro.client", err.Error())
        }

        // only sleep if greater than 0
        if t.Seconds() > 0 {
            time.Sleep(t)
        }

        // lookup the route to send the reques to
        route, err := g.lookupRoute(req, callOpts)
        if err != nil {
            return err
        }

        // pass a node to enable backwards compatability as changing the
        // call func would be a breaking change.
        // todo v3: change the call func to accept a route
        node := ®istry.Node{Address: route.Address}

        // make the call
        err = gcall(ctx, node, req, rsp, callOpts)

        // record the result of the call to inform future routing decisions
        g.opts.Selector.Record(*route, err)

        // try and transform the error to a go-micro error
        if verr, ok := err.(*errors.Error); ok {
            return verr
        }

        return err
    }

    ch := make(chan error, callOpts.Retries+1)
    var gerr error

    for i := 0; i <= callOpts.Retries; i++ {
        go func(i int) {
            ch <- call(i)
        }(i)

        select {
        case <-ctx.Done():
            return errors.New("go.micro.client", fmt.Sprintf("%v", ctx.Err()), 408)
        case err := <-ch:
            // if the call succeeded lets bail early
            if err == nil {
                return nil
            }

            retry, rerr := callOpts.Retry(ctx, req, i, err)
            if rerr != nil {
                return rerr
            }

            if !retry {
                return err
            }

            gerr = err
        }
    }

    return gerr
}

这里做了以下事情

1. 设置g.opts.CallOptions
2. 设置ctx超时，超时返回错误408
3. 复制了grpcClient.call()给变量gcall
4. 依次调用callOpts.CallWrappers 中间件，注意这里，前面是client中间件，这里是call中间件，具体在中间件文章讲

5. 声明call()函数，

   1. 设置delay 机制

   2. 调用g.lookupRoute(),返回router.Route{}

      1. 初始化router.QueryOption

      2. opts.Router.Lookup(query...) ->query()（router/default.go）

         1. 从缓存查t.routes[opts.Service]，查不到就调用t.fetchRoutes(opts.Service)获取路由表后再取，这里的fetchRoutes()并不是router/table.go中的函数，而是router/default.go中router.fetchRoutes(),在router/default.go中的newRouter()里r.table = newTable(r.fetchRoutes)设置了table.fetchRoutes。
      3. 设置opts.Selector，默认random
      4. opts.Selector.Select(routes, opts.SelectOptions...)选择合适的route发起请求,只有一个就直接返回，多个就随机返回一个，selector可以有其他实现方式实现，具体看实际业务了

   3. 定义registry.Node，调用gcall(),即grpcClient.call()

      1. 定义header，加入timeout，x-content-type，放入ctx
      2. 设置grpc.DialOption{}等参数，然后调用g.pool.getConn()，使用连接池发起连接
      3. 开协程，设置grpc.CallOption{},发起远程调用cc.Invoke()(google.golang.org/grpc/call.go),完成后发出通知给ch chan
      4. 监听调用完成ch chan,ctx超时chan
   4. 记录调用结果，用于优化选择，然而random的Selector里面啥也没干

6. 定义重试次数（默认1），调用第5步的call()

   1. 接受ctx超时信号(返回408错误)，
   2. call()中完成的信号，成功完成就返回nill，不然就调用Retry()

这就是一次call请求的流程，这里没有深入底层grpc是如何发起请求的，感兴趣的同学可以查阅下代码

如有错漏，请留言告知，Thanks♪(･ω･)ﾉ

go micro 分析系列文章
go micro server 启动分析
go micro client
go micro broker
go micro cmd
go micro config
go micro store
go micro registry
go micro router
go micro runtime
go micro transport
go micro web
go micro registry 插件consul
go micro plugin
go micro jwt 网关鉴权
go micro 链路追踪
go micro 熔断与限流
go micro wrapper 中间件
go micro metrics 接入Prometheus、Grafana