Kafka学习记录及简单上手代码

kafka

为什么需要消息队列?

解耦:允许独立的拓展或修该双方逻辑交互过程程序,只要保证保证双方的遵守同样的接口约束
冗余:保证数据多个副本不至于数据丢失以及数据重复
拓展性:可添加相应的额外处理过程
灵活性&峰值处理能力:突发流量访问激增,仍然能够保证程序稳定运行
可恢复性:消息队列降低了进程间的耦合性,一个消息队列处理进程挂掉,加入队列的消息任然可以在系统恢复后被处理
顺序保证:到部分消息队列都要保证处理消息的顺序性(kafka保证一个partition内的消息的有序性)
缓冲:加快数据处理速度
异步通信:减少程序等待,提高程序处理速度

kafka定义

kafka是一个开源的消息系统,由Scala语言写成,由apache基金会开发
kafka是一个分布式消息队列,kafka对消息保存时根据Topic进行归类,发送消息者称为producer,消息接收者为consumer,kafka集群中存在多个kafka实例,每个实例(server)称为broker
kafka集群依赖zookeeper里面的meta信息

kafka的架构流程

流程中的角色
producer消息生产者,指消息kafka broker发送数据的客户端
consumer消息消费者,向kafka broker 取数据的客户端
topic 主题,可理解为一个队列
cocnsumer group 消费者组,多个消费者共同消费一个topic消息
broker 就是一台kafka服务器,一个集群中有多个broker,一个broker有多个topic
partition 一个topic可以分为多个partition,每个partition是一个有序队列,partition中的消息都有一个有序的id(offset),kafka只保证一个partition中的消息的有序性,不能保证一个topic或者多个partition中消息的有序性
offset 存储文件按照offset.kafka来命名,用offset命名的好处是方便查找

kafka处理流程步奏

producer生产数据到kafuka集群,消息发送到集群中的相应的broker 的topic 以及partition中
其中各个topic 和partition都在不同的broker中存在副本,并且各个broker存在leader,follower两种类型,kafka读写数据只存在于leader服务器上,follow只做副本以及当leader挂掉之后可做为新的leader
consumer消费集群中的数据,当数据量较大的时候就让多个消费者消费数据提高消费能力,就有了cocnsumer group,同一个消费者组数据共享,多个消费者消费部分数据
zookeeper存放kafka的meta集群信息以及消费者消费队列的信息(消费偏移量offset)

kafka下载地址:http://kafka.apache.org/downloads

kafka集群安装

1. 下载kafka安装到指定目录,这里我放在/opt/module/kafka下,解压安装
2. 创建一个logs日志文件夹(因为kafka存储的日志数据可做其他用途)
3. 修改配置文件安装目录下的config/server.properties
4. 配置环境变量profile(为了在任何路径都可执行kafka命令,这一步可省略)

#kafka home 
	export KAFKA_HOME=/opt/module/kafka
	export PATH=$PATH:$KAFKA_HOME/bin

5. 分发安装包xsync
6. 启动集群bin/kafka-server-start.sh config/server.properties &
   后台启动不打日志,守护线程启动 nohup bin/kafka-server-start.sh -daemons config/server.properties &

server.properties配置文件

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# see kafka.server.KafkaConfig for additional details and defaults

############################# Server Basics #############################
 
# The id of the broker. This must be set to a unique integer for each broker.  服务器唯一ID 
broker.id=0

# Switch to enable topic deletion or not, default value is false 	 删除topic功能开关
#delete.topic.enable=true

############################# Socket Server Settings #############################

# The address the socket server listens on. It will get the value returned from 
# java.net.InetAddress.getCanonicalHostName() if not configured.
#   FORMAT:
#     listeners = listener_name://host_name:port
#   EXAMPLE:
#     listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092

# Hostname and port the broker will advertise to producers and consumers. If not set, 
# it uses the value for "listeners" if configured.  Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092

# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL

# The number of threads that the server uses for receiving requests from the network and sending responses to the network 处理网络请求的的线程数
num.network.threads=3

# The number of threads that the server uses for processing requests, which may include disk I/O 处理磁盘io的线程数量
num.io.threads=8

# The send buffer (SO_SNDBUF) used by the socket server  发送套接字的缓冲区大小
socket.send.buffer.bytes=102400

# The receive buffer (SO_RCVBUF) used by the socket server  接收套接字的缓冲区大小
socket.receive.buffer.bytes=102400

# The maximum size of a request that the socket server will accept (protection against OOM)  请求套接字的缓冲区大小
socket.request.max.bytes=104857600


############################# Log Basics #############################

# A comma seperated list of directories under which to store log files kafka运行日志存放的路径
log.dirs=/tmp/kafka-logs

# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across  topic在当前broker上的分区个数
# the brokers.
num.partitions=1

# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.    恢复和清理data下数据的线程数量
num.recovery.threads.per.data.dir=1

############################# Internal Topic Settings  #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1

############################# Log Flush Policy #############################

# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
#    1. Durability: Unflushed data may be lost if you are not using replication.
#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.

# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000

# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000

############################# Log Retention Policy #############################

# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.

# The minimum age of a log file to be eligible for deletion due to age    segment文件保留的最长时间,超时将删除	
log.retention.hours=168

# A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824

# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824

# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000

############################# Zookeeper #############################

# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.   配置链接zookeeper集群地址
zookeeper.connect=localhost:2181

# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=6000


############################# Group Coordinator Settings #############################

# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0

kafka命令行操作

关闭集群

bin/kafka-server-stop.sh stop 

查看当前服务中的所有topic

bin/kafka-topics.sh --zookeeper hadoop1:2181 --list

创建topics

bin/kafka-topics.sh --zookeeper hadoop1:2181 --create --topic hadoop1 --partitions 3 --replication-factor 3
参数说明
--topic 定义topic名
--replication-factor 定义副本数
--partitions 定义分区数

查看topic信息

bin/kafka-topics.sh --zookeeper hadoop1:2181 --describe --topic hadoop1

删除topic

bin/kafka-topics.sh --zookeeper hadoop1:2181 --delete --topic hadoop1

发送消息

bin/kafka-console-producer.sh --broker-list hadoop1:9092 --topic hadoop1

单个消费者启动

bin/kafka-console-consumer.sh --zookeeper hadoop1:2181 --from-beginning --topic hadoop1
配置消费者组的模式(修改consumer.properties文件,group.id=test-consumer-group)
bin/kafka-console-consumer.sh --zookeeper hadoop1:2181  --topic hadoop1 --consumer.config config/consumer.properties
bin/kafka-console-consumer.sh --bootstrap-server hadoop1:2181  --topic hadoop1 --consumer.config config/consumer.properties

查看消费者组信息

bin/kafka-consumer-offset-checker.sh --zookeeper hadoop1:2181 --group kafka-group

副本再平衡

bin/kafka-preferred-replica-election.sh --zookeeper hadoop1:2181

kafka生产过程分析

producer采用推(push)模式将消息发布到broker,每条消息都被追加(append)到分区(patition)中,属于顺序写磁盘(顺序写磁盘效率比随机写内存高,零拷贝,kafka分段日志(segment),kafka预读(read ahead),后写(Write behind)保障kafka吞吐率)

分区(partition)消息发送时都被发送到一个topic,其本质就是一个目录,而topic是由一些partition logs(分区日志)组成,每个partition中俄消息都是有序的,生产的消息被不断追加到partition log 上,其中每一个消息都被赋予一个offset

分区的原因
方便集群拓展;
提高并发以partition 为单位读写
分区的原则
指定partition;
未指定partition但指定key,通过key的value进行hash出一个partition;
partition和key都未指定,使用轮询选出一个partition

副本(replication)
同一个partition可以有多个副本,如果没有副本,一旦broker宕机,其上所有partition的数据都不能被消费同时producer也不能将数据存储在其partition,引入replication,同一个partition可能会有多个副本,而这时需要在其副本中选出leader,生产者和消费者
只与leader交互,其他replication作为follower从leader中复制数据
ack应答机制
0:producer发送数据给leader,不管是否leader收到,效率最高
1(kafka默认):producer发送数据给leader,leader存放在log之后,producer就发送新的数据,这一段时间不管follower是否向leader同步成功,数据较为安全
-1(all):producer发送数据给leader,leader存放在log之后,等待所有follower同步成功之后,producer才能发送下一条数据,数据最安全,性能非常差

kafka消费过程分析

consumer链接zookeeper获取kafka集群的相关信息(主要是消费数据的offset值保存在zookeeper,在后期版本之后offset可放在集群中不用放在zookeeper)
消费者pull拉取kafka集群中指定的topic分区的信息消费,分批次取数据(缓冲数据多条数据),一个分区只能一个消费者消费,但是一个消费者可以消费多个分区,group consumer(消费者组)中包含的多个消费者里面的offset统一管理同组消费者成员消费
后期添加消费者消费,集群可做再平衡,消费者组从新从zookeeper获取集群信息,再平衡在kafka集群中进行

zookeeper存储kafka主要节点属性
cluster kafka集群信息(集群id)
controller 集群控制器(leader broker作为整个集群的控制器)
controller_epoch 轮值(leader竞选次数)
brokers 单个服务器信息(ids,topics,seqid)
consumers 消费者组信息(ids,owners)

kafka面试要点

1. kafka的吞吐量高的原因:顺写日志,零拷贝(zero-cooy),kafka分段日志(segment),kafka预读(read ahead),后写(Write behind),批处理,压缩(byte)保障kafka吞吐率
2. kafka的偏移量offset存放位置:早前版本zookeeper,后期版本放在cluster版本中(_consumer_offset),自定义维护offset(eg:redis里面,数据库都可以)
3. kafka消费方式:poll,拉取方式
4. 防止kafka数据丢失的的措施:同步发送数据,ack=-1(all)
5. 重复消费:维护offset避免重复消费(低级api)
6. kafka元数据存放:zookeeper(/cluster,/controller,/controller_epoch,/brokers,/consumers)
7. kafka选举机制:/controller 不同机器同时去zookeeper注册/controller节点,先到先得,成功之后从isr列表选取leader,全挂等待副本
8. kafka的消费速度:增加分区和消费者,增加poll数量,增大批处理大小

上手代码地址:https://gitee.com/ArnoldSu/kafka