我看了很多DMA2D教程都是用阻塞方式来刷新屏, 这样就消耗了性能 相当于没用DMA, 所以我使用DMA2D中断来传输数据
stm32f429 + 正点原子7寸1024x600液晶屏 45MHZ刷新率 + LVGL
公有条件:
LTDC刷新率45MHZ, 开启SDRAM 突发传输, LVGL 2个全尺寸缓冲区
LVGL配置
#define LV_USE_GPU 1 /*Only enables `gpu_fill_cb` and `gpu_blend_cb` in the disp. drv- */
#define LV_USE_GPU_STM32_DMA2D 0
/*If enabling LV_USE_GPU_STM32_DMA2D, LV_GPU_DMA2D_CMSIS_INCLUDE must be defined to include path of CMSIS header of target processor
e.g. "stm32f769xx.h" or "stm32f429xx.h" */
#define LV_GPU_DMA2D_CMSIS_INCLUDE "stm32f429xx.h"
LVGL port配置
static void disp_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p)
{
/*The most simple case (but also the slowest) to put all pixels to the screen one-by-one*/
//LTDC_Color_Fill(area->x1,area->y1,area->x2,area->y2,(uint16_t*)(color_p));
uint32_t h = area->y2 - area->y1;
uint32_t w = area->x2 - area->x1;
uint32_t OffLineSrc = 1024 - (area->x2 - area->x1 +1);
uint32_t addr = LCD_FRAME_BUF_ADDR + 2*(1024*area->y1 + area->x1);
// --- 阻塞传输---
// 模式
DMA2D->CR = 0x00000000UL | (1 << 9);
// 源地址
DMA2D->FGMAR = (uint32_t)(uint16_t*)(color_p);
// 目标地址
DMA2D->OMAR = (uint32_t)addr;
// 输入偏移
DMA2D->FGOR = 0;
// 输出偏移
DMA2D->OOR = OffLineSrc;
/* 前景层和输出区域都采用的RGB565颜色格式 */
DMA2D->FGPFCCR = LTDC_PIXEL_FORMAT_RGB565;
DMA2D->OPFCCR = LTDC_PIXEL_FORMAT_RGB565;
DMA2D->NLR = (area->y2-area->y1+1) | ((area->x2 -area->x1 +1) << 16);
/* 启动传输 */
DMA2D->CR |= DMA2D_CR_START;
/* 等待DMA2D传输完成 */
while (DMA2D->CR & DMA2D_CR_START) {}
lv_disp_flush_ready(disp_drv);
}
跑benckmark大概是11fps
#define LV_USE_GPU 0 /*Only enables `gpu_fill_cb` and `gpu_blend_cb` in the disp. drv- */
#define LV_USE_GPU_STM32_DMA2D 1
/*If enabling LV_USE_GPU_STM32_DMA2D, LV_GPU_DMA2D_CMSIS_INCLUDE must be defined to include path of CMSIS header of target processor
e.g. "stm32f769xx.h" or "stm32f429xx.h" */
#define LV_GPU_DMA2D_CMSIS_INCLUDE "stm32f429xx.h"
加入宏定义STM32F4
因为如果LVGL开启DMA2D之后, 会进入到DMA2D中断,所以要判断是LVGL内部中断,还是自己的刷图中断, 用volatile uint8_t g_gpu_state = 0; 这个来判断
#define LV_USE_GPU 1 /*Only enables `gpu_fill_cb` and `gpu_blend_cb` in the disp. drv- */
#define LV_USE_GPU_STM32_DMA2D 0
/*If enabling LV_USE_GPU_STM32_DMA2D, LV_GPU_DMA2D_CMSIS_INCLUDE must be defined to include path of CMSIS header of target processor
e.g. "stm32f769xx.h" or "stm32f429xx.h" */
#define LV_GPU_DMA2D_CMSIS_INCLUDE "stm32f429xx.h"
volatile uint8_t g_gpu_state = 0;
// DMA2D传输完成回调
static void mDMA2Dcallvack(DMA2D_HandleTypeDef *hdma2d)
{
if(g_gpu_state==1){
g_gpu_state = 0;
lv_disp_flush_ready(&g_disp_drv);
}
}
// dma2D采用HAL初始化
static void dma2d_use_hal_init(void)
{
hdma2d.Instance = DMA2D;
hdma2d.XferCpltCallback = mDMA2Dcallvack;
if (HAL_DMA2D_Init(&hdma2d) != HAL_OK)
{
}
}
/* Initialize your display and the required peripherals. */
static void disp_init(void)
{
dma2d_use_reg_init();
}
static void disp_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p)
{
/*The most simple case (but also the slowest) to put all pixels to the screen one-by-one*/
//LTDC_Color_Fill(area->x1,area->y1,area->x2,area->y2,(uint16_t*)(color_p));
uint32_t h = area->y2 - area->y1;
uint32_t w = area->x2 - area->x1;
uint32_t OffLineSrc = 1024 - (area->x2 - area->x1 +1);
uint32_t addr = LCD_FRAME_BUF_ADDR + 2*(1024*area->y1 + area->x1);
// -- 中断传输
// 模式
DMA2D->CR = 0x00000000UL | (1 << 9);
// 源地址
DMA2D->FGMAR = (uint32_t)(uint16_t*)(color_p);
// 目标地址
DMA2D->OMAR = (uint32_t)addr;
// 输入偏移
DMA2D->FGOR = 0;
// 输出偏移
DMA2D->OOR = OffLineSrc;
/* 前景层和输出区域都采用的RGB565颜色格式 */
DMA2D->FGPFCCR = DMA2D_OUTPUT_RGB565;
DMA2D->OPFCCR = DMA2D_OUTPUT_RGB565;
// 多少行
DMA2D->NLR = (area->y2-area->y1+1) | ((area->x2 -area->x1 +1) << 16);
// 开启中断
DMA2D->CR |= DMA2D_IT_TC|DMA2D_IT_TE|DMA2D_IT_CE;
/* 启动传输 */
DMA2D->CR |= DMA2D_CR_START;
g_gpu_state = 1;
}
#define LV_USE_GPU 0 /*Only enables `gpu_fill_cb` and `gpu_blend_cb` in the disp. drv- */
#define LV_USE_GPU_STM32_DMA2D 1
/*If enabling LV_USE_GPU_STM32_DMA2D, LV_GPU_DMA2D_CMSIS_INCLUDE must be defined to include path of CMSIS header of target processor
e.g. "stm32f769xx.h" or "stm32f429xx.h" */
#define LV_GPU_DMA2D_CMSIS_INCLUDE "stm32f429xx.h"
volatile uint8_t g_gpu_state = 0;
// DMA2D传输完成回调
static void mDMA2Dcallvack(DMA2D_HandleTypeDef *hdma2d)
{
if(g_gpu_state==1){
g_gpu_state = 0;
lv_disp_flush_ready(&g_disp_drv);
}
}
// dma2D采用HAL初始化
static void dma2d_use_hal_init(void)
{
hdma2d.Instance = DMA2D;
hdma2d.XferCpltCallback = mDMA2Dcallvack;
if (HAL_DMA2D_Init(&hdma2d) != HAL_OK)
{
}
}
/* Initialize your display and the required peripherals. */
static void disp_init(void)
{
dma2d_use_reg_init();
}
static void disp_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p)
{
/*The most simple case (but also the slowest) to put all pixels to the screen one-by-one*/
//LTDC_Color_Fill(area->x1,area->y1,area->x2,area->y2,(uint16_t*)(color_p));
uint32_t h = area->y2 - area->y1;
uint32_t w = area->x2 - area->x1;
uint32_t OffLineSrc = 1024 - (area->x2 - area->x1 +1);
uint32_t addr = LCD_FRAME_BUF_ADDR + 2*(1024*area->y1 + area->x1);
// -- 中断传输
// 模式
DMA2D->CR = 0x00000000UL | (1 << 9);
// 源地址
DMA2D->FGMAR = (uint32_t)(uint16_t*)(color_p);
// 目标地址
DMA2D->OMAR = (uint32_t)addr;
// 输入偏移
DMA2D->FGOR = 0;
// 输出偏移
DMA2D->OOR = OffLineSrc;
/* 前景层和输出区域都采用的RGB565颜色格式 */
DMA2D->FGPFCCR = DMA2D_OUTPUT_RGB565;
DMA2D->OPFCCR = DMA2D_OUTPUT_RGB565;
// 多少行
DMA2D->NLR = (area->y2-area->y1+1) | ((area->x2 -area->x1 +1) << 16);
// 开启中断
DMA2D->CR |= DMA2D_IT_TC|DMA2D_IT_TE|DMA2D_IT_CE;
/* 启动传输 */
DMA2D->CR |= DMA2D_CR_START;
g_gpu_state = 1;
}
对比:
1 不使用GPU,使用寄存器DMA2D,11fps
2 使用GPU,使用寄存器DMA2D, 23fps
3 不使用GPU,使用寄存器DMA2D中断传输, 11fps
4 使用GPU,中断传输, 30fps
另外我发现开单缓冲比双缓冲快很多, 这个bug估计未来会优化
因为1和3, fps相等是因为在颜色转换消耗了太多时间, 所以中断和阻塞方式基本上差不
听说打开优化等级和编译器等级会更快, 可以试试这个
另外自己写DMA2D中断和采用HAL的回调基本参没什么差距, 所以建议直接采用HAL库的回调
void DMA2D_IRQHandler(void)
{
if ((DMA2D->ISR & DMA2D_FLAG_TC) != 0U)
{
if ((DMA2D->CR & DMA2D_IT_TC) != 0U)
{
DMA2D->CR &= ~DMA2D_IT_TC;
DMA2D->IFCR =DMA2D_FLAG_TC;
if(g_gpu_state==1){
g_gpu_state = 0;
lv_disp_flush_ready(&g_disp_drv);
}
}
}
}