Hyperledger/Fabric-ca:x86_64-1.0.4 docker-compose.yml文件

Copyright IBM Corp All Rights Reserved

SPDX-License-Identifier: Apache-2.0

version: '2'

networks:
basic:

services:
ca.example.com:
image: hyperledger/fabric-ca:x86_64-1.0.4
environment:
- FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
- FABRIC_CA_SERVER_CA_NAME=ca.example.com
- FABRIC_CA_SERVER_CA_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
- FABRIC_CA_SERVER_CA_KEYFILE=/etc/hyperledger/fabric-ca-server-config/4239aa0dcd76daeeb8ba0cda701851d14504d31aad1b2ddddbac6a57365e497c_sk
ports:
- "7054:7054"
command: sh -c 'fabric-ca-server start -b admin:adminpw -d'
volumes:
- ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config
container_name: ca.example.com
networks:
- basic

orderer.example.com:
container_name: orderer.example.com
image: hyperledger/fabric-orderer:x86_64-1.0.5
environment:
- ORDERER_GENERAL_LOGLEVEL=debug
- ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
- ORDERER_GENERAL_GENESISMETHOD=file
- ORDERER_GENERAL_GENESISFILE=/etc/hyperledger/configtx/genesis.block
- ORDERER_GENERAL_LOCALMSPID=OrdererMSP
- ORDERER_GENERAL_LOCALMSPDIR=/etc/hyperledger/msp/orderer/msp
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/orderer
command: orderer
ports:
- 7050:7050
volumes:
- ./config/:/etc/hyperledger/configtx
- ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/:/etc/hyperledger/msp/orderer
- ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/:/etc/hyperledger/msp/peerOrg1
networks:
- basic

peer0.org1.example.com:
container_name: peer0.org1.example.com
image: hyperledger/fabric-peer:x86_64-1.0.4
environment:
- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
- CORE_PEER_ID=peer0.org1.example.com
- CORE_LOGGING_PEER=debug
- CORE_CHAINCODE_LOGGING_LEVEL=DEBUG
- CORE_PEER_LOCALMSPID=Org1MSP
- CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/
- CORE_PEER_ADDRESS=peer0.org1.example.com:7051
# # the following setting starts chaincode containers on the same
# # bridge network as the peers
# # https://docs.docker.com/compose/networking/
- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_basic
- CORE_LEDGER_STATE_STATEDATABASE=CouchDB
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984
# The CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME and CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD
# provide the credentials for ledger to connect to CouchDB. The username and password must
# match the username and password set for the associated CouchDB.
- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
working_dir: /opt/gopath/src/github.com/hyperledger/fabric
command: peer node start
# command: peer node start --peer-chaincodedev=true
ports:
- 7051:7051
- 7053:7053
volumes:
- /var/run/:/host/var/run/
- ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/msp/peer
- ./crypto-config/peerOrganizations/org1.example.com/users:/etc/hyperledger/msp/users
- ./config:/etc/hyperledger/configtx
depends_on:
- orderer.example.com
- couchdb
networks:
- basic

couchdb:
container_name: couchdb
image: hyperledger/fabric-couchdb:x86_64-0.4.5
# Populate the COUCHDB_USER and COUCHDB_PASSWORD to set an admin user and password
# for CouchDB. This will prevent CouchDB from operating in an "Admin Party" mode.
environment:
- COUCHDB_USER=
- COUCHDB_PASSWORD=
ports:
- 5984:5984
networks:
- basic

cli:
container_name: cli
image: hyperledger/fabric-tools:x86_64-1.0.4
tty: true
environment:
- GOPATH=/opt/gopath
- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
- CORE_LOGGING_LEVEL=DEBUG
- CORE_PEER_ID=cli
- CORE_PEER_ADDRESS=peer0.org1.example.com:7051
- CORE_PEER_LOCALMSPID=Org1MSP
- CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/[email protected]/msp
- CORE_CHAINCODE_KEEPALIVE=10
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: /bin/bash
volumes:
- /var/run/:/host/var/run/
- ./../chaincode/:/opt/gopath/src/github.com/
- ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
networks:
- basic
#depends_on:
# - orderer.example.com
# - peer0.org1.example.com
# - couchdb