cuma2369
cuma2369

如何在Ubuntu 18.04中安装Hyperledger Fabric 2.0

Hyperledger Fabric is a consortium blockchain system. It’s performance is relatively good and its modular architecture enables it to be usable in many scenarios. Hyperledger Fabric itself has rich documents and samples of test networks. For beginners, deploying a new network for trying and testing still consumes quite some time. In this post, we will provide a script specifically for deploying Hyperledger Fabric 2.0.0 on Ubuntu 18.04. The goal is to help beginners quickly set up an environment that is running and usable through running a single scripts instead of configuring a group of tools/packages with many steps.

Hyperledger Fabric是联盟的区块链系统。 它的性能相对较好，并且其模块化体系结构使其可以在许多情况下使用。 Hyperledger Fabric本身具有丰富的文档和测试网络示例。 对于初学者而言，部署新网络进行尝试和测试仍然会花费相当多的时间。 在本文中，我们将提供一个脚本，专门用于在Ubuntu 18.04上部署Hyperledger Fabric 2.0.0。 目的是帮助初学者通过运行单个脚本来快速设置一个可运行且可用的环境，而不是通过许多步骤来配置一组工具/软件包。

在Ubuntu 18.04上安装Hyperledger Fabric 2.0的脚本 (The script to install Hyperledger Fabric 2.0 on Ubuntu 18.04)

You can get the script install-hyperledger-fabric-2-ubuntu-18.04.sh. Another script install-go.sh is needed in the same repository that installs go 1.13.9.

您可以获取脚本install-hyperledger-fabric-2-ubuntu-18.04.sh 。 在安装go 1.13.9的同一存储库中需要另一个脚本install-go.sh 。

安装Hyperledger Fabric 2.0 (Install Hyperledger Fabric 2.0)

Following these steps in a Ubuntu 18.04 Linux under a user that can sudo.

在可以sudo的用户下在Ubuntu 18.04 Linux中执行以下步骤。 

$ git clone https://github.com/zma/usefulscripts
$ cd usefulscripts && git checkout git checkout 0088716ce8b649652150672b8ccdc6beb42d4aa5
$ script/install-hyperledger-fabric-2-ubuntu-18.04.sh

That’s it! It will install the needed packages, deploy Hyperledger Fabric 2.0.0 for you. If you see a message as follows, you have a good and running Hyperledger Fabric 2.0 network.

而已！ 它将安装所需的软件包，并为您部署Hyperledger Fabric 2.0.0。 如果看到以下消息，则说明您的Hyperledger Fabric 2.0网络运行良好。 

**** Congratulations! ****
Your Hyperledger Fabric 2.0.0 test network with channel mychannel and chaincode fabcar is ready. Enjoy.

To shutdown the network, first logout and then login again, then run:
cd /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network && ./network.sh down

(a full STDOUT output is at the later part of this post for reference)

（完整的STDOUT输出在本文的后面，以供参考）

下一步是什么？ (What’s next?)

You can continue the test-network tutorial by trying more Fabric commands/tools.

您可以尝试更多的Fabric命令/工具来继续测试网络教程 。

逐步解释脚本的功能 (Step by step explanation of what the script does)

The script sets up the test-network environment following the fabric-sample tutorial.

该脚本按照fabric-sample教程设置测试网络环境 。

Following are the steps the scripts does.

以下是脚本执行的步骤。

First, it installs Go 1.13.9 using the install-go.sh script.

首先，它使用install-go.sh脚本安装Go 1.13.9。

Then, it adds lines to ~/.bashrc following Fabric’s requirement that the $GOPATH must be set with only one path.

然后，它按照Fabric的要求（必须仅使用一个路径设置$GOPATH向~/.bashrc添加行。 

echo 'export GOPATH=$HOME/go' >> ~/.bashrc
  echo 'export PATH=$GOPATH/bin:$PATH' >> ~/.bashrc

Then, it installs the packages needed.

然后，它将安装所需的软件包。 

sudoapt install git curl wget docker docker-compose nodejs npm
sudo npm install [email protected] -g
sudo usermod -aG docker $USER

Then, it prints the versions out as a reference.

然后，将版本打印出来作为参考。 

docker --version
docker-compose --version
npm --version
go version

Then, it uses the Fabric’s bootstrap.sh script to install the binaries and docker images.

然后，它使用Fabric的bootstrap.sh脚本安装二进制文件和docker映像。 

sg docker -c "curl -sSL https://bit.ly/2ysbOFE | bash -s -- 2.0.0 1.4.6 0.4.18 -s"

Then, it use the test-network scripts from fabric-samples to set up one network.

然后，它使用结构样本中的测试网络脚本来建立一个网络。 

sg docker -c "./network.sh up"

Then, it create a channel named mychannel.

然后，它创建一个名为mychannel的通道。 

sg docker -c "./network.sh createChannel -c mychannel"

Last, it deploys a go chaincode fabcar.

最后，它部署了go chaincode fabcar。 

sg docker -c "./network.sh deployCC -l go"

附录：脚本执行的STDOUT示例 (Appendix: an example of script execution’s STDOUT)

A full execution STDOUT is as follows for reference.

完整的执行STDOUT如下，以供参考。 

ericma@ubuntu18-04:~$ git clone https://github.com/zma/usefulscripts
Cloning into 'usefulscripts'...
remote: Enumerating objects: 142, done.
remote: Counting objects: 100% (142/142), done.
remote: Compressing objects: 100% (98/98), done.
remote: Total 545 (delta 80), reused 78 (delta 44), pack-reused 403
Receiving objects: 100% (545/545), 109.59 KiB | 233.00 KiB/s, done.
Resolving deltas: 100% (306/306), done.
ericma@ubuntu18-04:~$ cd usefulscripts/
ericma@ubuntu18-04:~/usefulscripts$ git checkout 0088716ce8b649652150672b8ccdc6beb42d4aa5
Note: checking out '0088716ce8b649652150672b8ccdc6beb42d4aa5'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b 

HEAD is now at 2fc9fda install-go avoid name collision
ericma@ubuntu18-04:~/usefulscripts$ ./script/install-hyperledger-fabric-2-ubuntu-18.04.sh ^C
ericma@ubuntu18-04:~/usefulscripts$ script/install-hyperledger-fabric-2-ubuntu-18.04.sh

Set up Go 1.13.9 ...
--2020-04-07 17:08:05--  https://dl.google.com/go/go1.13.9.linux-amd64.tar.gz
Resolving dl.google.com (dl.google.com)... 172.217.26.142, 2404:6800:4005:808::200e
Connecting to dl.google.com (dl.google.com)|172.217.26.142|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 120139686 (115M) [application/octet-stream]
Saving to: ‘go1.13.9.linux-amd64.tar.gz’

go1.13.9.linux-amd64.tar.gz         100%[================================================================>] 114.57M  7.13MB/s    in 66s     

2020-04-07 17:09:12 (1.73 MB/s) - ‘go1.13.9.linux-amd64.tar.gz’ saved [120139686/120139686]

[sudo] password for ericma: 
export GOROOT=/usr/local/go-1.13

export PATH=$GOROOT/bin:$PATH
Installed Go 1.13. You can now logout and login again to verify.

Installa packages ...
Reading package lists... Done
Building dependency tree       
Reading state information... Done
curl is already the newest version (7.58.0-2ubuntu3.8).
curl set to manually installed.
git is already the newest version (1:2.17.1-1ubuntu0.5).
git set to manually installed.
wget is already the newest version (1.19.4-1ubuntu2.2).
wget set to manually installed.
The following additional packages will be installed:
  binutils binutils-common binutils-x86-64-linux-gnu bridge-utils build-essential cgroupfs-mount containerd cpp cpp-7 docker.io dpkg-dev
  fakeroot g++ g++-7 gcc gcc-7 gcc-7-base golang-docker-credential-helpers gyp javascript-common libalgorithm-diff-perl
  libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan4 libatomic1 libbinutils libc-ares2 libc-dev-bin libc6-dev libcc1-0 libcilkrts5
  libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-7-dev libgomp1 libhttp-parser2.7.1 libisl19 libitm1 libjs-async libjs-inherits
  libjs-jquery libjs-node-uuid libjs-underscore liblsan0 libmpc3 libmpx2 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib
  libquadmath0 libsecret-1-0 libsecret-common libssl1.0-dev libstdc++-7-dev libtsan0 libubsan0 libuv1-dev linux-libc-dev make manpages-dev
  node-abbrev node-ansi node-ansi-color-table node-archy node-async node-balanced-match node-block-stream node-brace-expansion
  node-builtin-modules node-combined-stream node-concat-map node-cookie-jar node-delayed-stream node-forever-agent node-form-data
  node-fs.realpath node-fstream node-fstream-ignore node-github-url-from-git node-glob node-graceful-fs node-gyp node-hosted-git-info
  node-inflight node-inherits node-ini node-is-builtin-module node-isexe node-json-stringify-safe node-lockfile node-lru-cache node-mime
  node-minimatch node-mkdirp node-mute-stream node-node-uuid node-nopt node-normalize-package-data node-npmlog node-once node-osenv
  node-path-is-absolute node-pseudomap node-qs node-read node-read-package-json node-request node-retry node-rimraf node-semver node-sha
  node-slide node-spdx-correct node-spdx-expression-parse node-spdx-license-ids node-tar node-tunnel-agent node-underscore
  node-validate-npm-package-license node-which node-wrappy node-yallist nodejs-dev nodejs-doc pigz python python-asn1crypto
  python-backports.ssl-match-hostname python-cached-property python-certifi python-cffi-backend python-chardet python-cryptography
  python-docker python-dockerpty python-dockerpycreds python-docopt python-enum34 python-funcsigs python-functools32 python-idna
  python-ipaddress python-jsonschema python-minimal python-mock python-openssl python-pbr python-pkg-resources python-requests python-six
  python-texttable python-urllib3 python-websocket python-yaml python2.7 python2.7-minimal runc ubuntu-fan
Suggested packages:
  binutils-doc ifupdown cpp-doc gcc-7-locales aufs-tools debootstrap docker-doc rinse zfs-fuse | zfsutils debian-keyring g++-multilib
  g++-7-multilib gcc-7-doc libstdc++6-7-dbg gcc-multilib autoconf automake libtool flex bison gdb gcc-doc gcc-7-multilib libgcc1-dbg
  libgomp1-dbg libitm1-dbg libatomic1-dbg libasan4-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx2-dbg libquadmath0-dbg
  apache2 | lighttpd | httpd glibc-doc bzr libstdc++-7-doc make-doc node-hawk node-aws-sign node-oauth-sign node-http-signature debhelper
  python-doc python-tk python-cryptography-doc python-cryptography-vectors python-enum34-doc python-funcsigs-doc python-mock-doc
  python-openssl-doc python-openssl-dbg python-setuptools python-socks python-ntlm python2.7-doc binfmt-support
The following NEW packages will be installed:
  binutils binutils-common binutils-x86-64-linux-gnu bridge-utils build-essential cgroupfs-mount containerd cpp cpp-7 docker docker-compose
  docker.io dpkg-dev fakeroot g++ g++-7 gcc gcc-7 gcc-7-base golang-docker-credential-helpers gyp javascript-common libalgorithm-diff-perl
  libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan4 libatomic1 libbinutils libc-ares2 libc-dev-bin libc6-dev libcc1-0 libcilkrts5
  libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-7-dev libgomp1 libhttp-parser2.7.1 libisl19 libitm1 libjs-async libjs-inherits
  libjs-jquery libjs-node-uuid libjs-underscore liblsan0 libmpc3 libmpx2 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib
  libquadmath0 libsecret-1-0 libsecret-common libssl1.0-dev libstdc++-7-dev libtsan0 libubsan0 libuv1-dev linux-libc-dev make manpages-dev
  node-abbrev node-ansi node-ansi-color-table node-archy node-async node-balanced-match node-block-stream node-brace-expansion
  node-builtin-modules node-combined-stream node-concat-map node-cookie-jar node-delayed-stream node-forever-agent node-form-data
  node-fs.realpath node-fstream node-fstream-ignore node-github-url-from-git node-glob node-graceful-fs node-gyp node-hosted-git-info
  node-inflight node-inherits node-ini node-is-builtin-module node-isexe node-json-stringify-safe node-lockfile node-lru-cache node-mime
  node-minimatch node-mkdirp node-mute-stream node-node-uuid node-nopt node-normalize-package-data node-npmlog node-once node-osenv
  node-path-is-absolute node-pseudomap node-qs node-read node-read-package-json node-request node-retry node-rimraf node-semver node-sha
  node-slide node-spdx-correct node-spdx-expression-parse node-spdx-license-ids node-tar node-tunnel-agent node-underscore
  node-validate-npm-package-license node-which node-wrappy node-yallist nodejs nodejs-dev nodejs-doc npm pigz python python-asn1crypto
  python-backports.ssl-match-hostname python-cached-property python-certifi python-cffi-backend python-chardet python-cryptography
  python-docker python-dockerpty python-dockerpycreds python-docopt python-enum34 python-funcsigs python-functools32 python-idna
  python-ipaddress python-jsonschema python-minimal python-mock python-openssl python-pbr python-pkg-resources python-requests python-six
  python-texttable python-urllib3 python-websocket python-yaml python2.7 python2.7-minimal runc ubuntu-fan
0 upgraded, 163 newly installed, 0 to remove and 21 not upgraded.
Need to get 123 MB of archives.
After this operation, 560 MB of additional disk space will be used.
Do you want to continue? [Y/n] 
...
Setting up libquadmath0:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up libgomp1:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up libjs-jquery (3.2.1-1) ...
Setting up libatomic1:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up nodejs-doc (8.10.0~dfsg-2ubuntu0.4) ...
Setting up libsecret-common (0.18.6-1) ...
Setting up libhttp-parser2.7.1:amd64 (2.7.1-2) ...
Setting up libcc1-0:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up make (4.1-9.1ubuntu1) ...
Setting up libjs-node-uuid (1.4.7-5) ...
Setting up libjs-underscore (1.8.3~dfsg-1) ...
Setting up runc (1.0.0~rc10-0ubuntu1~18.04.2) ...
Setting up libjs-inherits (2.0.3-1) ...
Setting up libtsan0:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up linux-libc-dev:amd64 (4.15.0-96.97) ...
Setting up libdpkg-perl (1.19.0.5ubuntu2.3) ...
Setting up libssl1.0-dev:amd64 (1.0.2n-1ubuntu5.3) ...
Setting up cgroupfs-mount (1.4) ...
Setting up containerd (1.3.3-0ubuntu1~18.04.2) ...
Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service.
Setting up bridge-utils (1.5-15ubuntu1) ...
Setting up liblsan0:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up gcc-7-base:amd64 (7.5.0-3ubuntu1~18.04) ...
Setting up binutils-common:amd64 (2.30-21ubuntu1~18.04.2) ...
Setting up libfile-fcntllock-perl (0.22-3build2) ...
Setting up libmpx2:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up ubuntu-fan (0.12.10) ...
Created symlink /etc/systemd/system/multi-user.target.wants/ubuntu-fan.service → /lib/systemd/system/ubuntu-fan.service.
Setting up libfakeroot:amd64 (1.22-2ubuntu1) ...
Setting up libalgorithm-diff-perl (1.19.03-1) ...
Setting up libmpc3:amd64 (1.1.0-1) ...
Setting up libc-dev-bin (2.27-3ubuntu1) ...
Setting up javascript-common (11) ...
Setting up libjs-async (0.8.0-3) ...
Setting up manpages-dev (4.15-1) ...
Setting up libsecret-1-0:amd64 (0.18.6-1) ...
Setting up libc6-dev:amd64 (2.27-3ubuntu1) ...
Setting up docker (1.5-1build1) ...
Setting up pigz (2.4-1) ...
Setting up libc-ares2:amd64 (1.14.0-1) ...
Setting up libitm1:amd64 (8.4.0-1ubuntu1~18.04) ...
Setting up libpython2.7-stdlib:amd64 (2.7.17-1~18.04) ...
Setting up libuv1-dev:amd64 (1.18.0-3) ...
Setting up libisl19:amd64 (0.19-1) ...
Setting up docker.io (19.03.6-0ubuntu1~18.04.1) ...
Adding group `docker' (GID 113) ...
Done.
Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket.
docker.service is a disabled or a static unit, not starting it.
Setting up libasan4:amd64 (7.5.0-3ubuntu1~18.04) ...
Setting up nodejs (8.10.0~dfsg-2ubuntu0.4) ...
update-alternatives: using /usr/bin/nodejs to provide /usr/bin/js (js) in auto mode
Setting up libbinutils:amd64 (2.30-21ubuntu1~18.04.2) ...
Setting up node-balanced-match (0.4.2-1) ...
Setting up libcilkrts5:amd64 (7.5.0-3ubuntu1~18.04) ...
Setting up node-node-uuid (1.4.7-5) ...
Setting up node-yallist (2.0.0-1) ...
Setting up libubsan0:amd64 (7.5.0-3ubuntu1~18.04) ...
Setting up node-slide (1.1.6-1) ...
Setting up node-github-url-from-git (1.4.0-1) ...
Setting up node-pseudomap (1.0.2-1) ...
Setting up python2.7 (2.7.17-1~18.04) ...
Setting up node-spdx-license-ids (1.2.2-1) ...
Setting up node-wrappy (1.0.2-1) ...
Setting up node-mime (1.3.4-1) ...
Setting up fakeroot (1.22-2ubuntu1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up node-abbrev (1.0.9-1) ...
Setting up node-semver (5.4.1-1) ...
Setting up libgcc-7-dev:amd64 (7.5.0-3ubuntu1~18.04) ...
Setting up cpp-7 (7.5.0-3ubuntu1~18.04) ...
Setting up libstdc++-7-dev:amd64 (7.5.0-3ubuntu1~18.04) ...
Setting up node-retry (0.10.1-1) ...
Setting up libpython-stdlib:amd64 (2.7.15~rc1-1) ...
Setting up libalgorithm-merge-perl (0.08-3) ...
Setting up node-forever-agent (0.5.1-1) ...
Setting up node-underscore (1.8.3~dfsg-1) ...
Setting up libalgorithm-diff-xs-perl (0.04-5) ...
Setting up golang-docker-credential-helpers (0.5.0-2) ...
Setting up node-json-stringify-safe (5.0.0-1) ...
Setting up node-inherits (2.0.3-1) ...
Setting up node-graceful-fs (4.1.11-1) ...
Setting up node-archy (1.0.0-1ubuntu1) ...
Setting up node-path-is-absolute (1.0.0-1) ...
Setting up node-builtin-modules (1.1.1-1) ...
Setting up node-isexe (2.0.0-3) ...
Setting up node-spdx-correct (1.0.2-1) ...
Setting up node-async (0.8.0-3) ...
Setting up node-cookie-jar (0.3.1-1) ...
Setting up node-mute-stream (0.0.7-1) ...
Setting up node-concat-map (0.0.1-1) ...
Setting up node-ini (1.3.4-1) ...
Setting up node-mkdirp (0.5.1-1) ...
Setting up node-once (1.4.0-2ubuntu1) ...
Setting up python (2.7.15~rc1-1) ...
Setting up node-sha (1.2.3-1) ...
Setting up node-fs.realpath (1.0.0-1) ...
Setting up binutils-x86-64-linux-gnu (2.30-21ubuntu1~18.04.2) ...
Setting up node-lockfile (0.4.1-1) ...
Setting up node-brace-expansion (1.1.8-1) ...
Setting up python-idna (2.6-1) ...
Setting up node-spdx-expression-parse (1.0.4-1) ...
Setting up cpp (4:7.4.0-1ubuntu2.3) ...
Setting up node-qs (2.2.4-1ubuntu1) ...
Setting up python-texttable (0.9.1-1) ...
Setting up node-osenv (0.1.4-1) ...
Setting up node-ansi (0.3.0-2ubuntu1) ...
Setting up python-functools32 (3.2.3.2-3) ...
Setting up python-yaml (3.12-1build2) ...
Setting up node-is-builtin-module (1.0.0-1) ...
Setting up python-asn1crypto (0.24.0-1) ...
Setting up node-hosted-git-info (2.5.0-1) ...
Setting up node-delayed-stream (0.0.5-1) ...
Setting up node-tunnel-agent (0.3.1-1) ...
Setting up node-nopt (3.0.6-3) ...
Setting up node-which (1.3.0-1) ...
Setting up node-lru-cache (4.1.1-1) ...
Setting up python-certifi (2018.1.18-2) ...
Setting up node-combined-stream (0.0.5-1) ...
Setting up node-block-stream (0.0.9-1ubuntu1) ...
Setting up python-pkg-resources (39.0.1-2) ...
Setting up python-backports.ssl-match-hostname (3.5.0.1-1) ...
Setting up node-validate-npm-package-license (3.0.1-1) ...
Setting up node-inflight (1.0.6-1) ...
Setting up python-cffi-backend (1.11.5-1) ...
Setting up node-read (1.0.7-1) ...
Setting up python-six (1.11.0-2) ...
Setting up python-dockerpty (0.4.1-1) ...
Setting up gyp (0.1+20150913git1f374df9-1ubuntu1) ...
Setting up python-pbr (3.1.1-3ubuntu3) ...
update-alternatives: using /usr/bin/python2-pbr to provide /usr/bin/pbr (pbr) in auto mode
Setting up python-enum34 (1.1.6-2) ...
Setting up python-funcsigs (1.0.2-4) ...
Setting up binutils (2.30-21ubuntu1~18.04.2) ...
Setting up python-docopt (0.6.2-1build1) ...
Setting up python-ipaddress (1.0.17-1) ...
Setting up node-form-data (0.1.0-1) ...
Setting up node-request (2.26.1-1) ...
Setting up node-minimatch (3.0.4-3) ...
Setting up nodejs-dev (8.10.0~dfsg-2ubuntu0.4) ...
Setting up python-cached-property (1.3.1-1) ...
Setting up node-normalize-package-data (2.3.5-2) ...
Setting up node-ansi-color-table (1.0.0-1) ...
Setting up node-npmlog (0.0.4-1) ...
Setting up python-urllib3 (1.22-1ubuntu0.18.04.1) ...
Setting up python-chardet (3.0.4-1) ...
Setting up python-dockerpycreds (0.2.1-1) ...
Setting up gcc-7 (7.5.0-3ubuntu1~18.04) ...
Setting up g++-7 (7.5.0-3ubuntu1~18.04) ...
Setting up python-mock (2.0.0-3) ...
Setting up gcc (4:7.4.0-1ubuntu2.3) ...
Setting up node-glob (7.1.2-4) ...
Setting up python-websocket (0.44.0-0ubuntu2) ...
update-alternatives: using /usr/bin/python2-wsdump to provide /usr/bin/wsdump (wsdump) in auto mode
Setting up dpkg-dev (1.19.0.5ubuntu2.3) ...
Setting up python-cryptography (2.1.4-1ubuntu1.3) ...
Setting up python-requests (2.18.4-2ubuntu0.1) ...
Setting up g++ (4:7.4.0-1ubuntu2.3) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up python-jsonschema (2.6.0-2) ...
update-alternatives: using /usr/bin/python2-jsonschema to provide /usr/bin/jsonschema (jsonschema) in auto mode
Setting up python-openssl (17.5.0-1ubuntu1) ...
Setting up build-essential (12.4ubuntu1) ...
Setting up python-docker (2.5.1-1) ...
Setting up docker-compose (1.17.1-2) ...
Setting up node-rimraf (2.6.2-1) ...
Setting up node-read-package-json (1.2.4-1) ...
Setting up node-fstream (1.0.10-1ubuntu0.18.04.1) ...
Setting up node-fstream-ignore (0.0.6-2) ...
Setting up node-tar (2.2.1-1) ...
Setting up node-gyp (3.6.2-1ubuntu1) ...
Setting up npm (3.5.2-0ubuntu4) ...
...
/usr/local/bin/npm -> /usr/local/lib/node_modules/npm/bin/npm-cli.js
/usr/local/bin/npx -> /usr/local/lib/node_modules/npm/bin/npx-cli.js
/usr/local/lib
...
├─┬ [email protected] 
...

Versions of software:
Docker version 19.03.6, build 369ce74a3c
docker-compose version 1.17.1, build unknown
5.6.0
go version go1.13.9 linux/amd64
package github.com/hyperledger/fabric-samples: no Go files in /home/ericma/go/src/github.com/hyperledger/fabric-samples
Note: checking out 'a026a4ffbfcf69f33a2a25cd71c5a776ca2fdda5'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b 

HEAD is now at a026a4f Fixed typo (#90)

Install Hyperledger Fabric 2.0.0 binaries and coker images ...

Pull Hyperledger Fabric binaries

===> Downloading version 2.0.0 platform specific fabric binaries
===> Downloading:  https://github.com/hyperledger/fabric/releases/download/v2.0.0/hyperledger-fabric-linux-amd64-2.0.0.tar.gz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   633  100   633    0     0    708      0 --:--:-- --:--:-- --:--:--   708
100 72.7M  100 72.7M    0     0  3984k      0  0:00:18  0:00:18 --:--:-- 5100k
==> Done.
===> Downloading version 1.4.6 platform specific fabric-ca-client binary
===> Downloading:  https://github.com/hyperledger/fabric-ca/releases/download/v1.4.6/hyperledger-fabric-ca-linux-amd64-1.4.6.tar.gz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   636  100   636    0     0    711      0 --:--:-- --:--:-- --:--:--   710
100 23.3M  100 23.3M    0     0  3119k      0  0:00:07  0:00:07 --:--:-- 4928k
==> Done.

Pull Hyperledger Fabric docker images

FABRIC_IMAGES: peer orderer ccenv tools nodeenv baseos javaenv
===> Pulling fabric Images
====> hyperledger/fabric-peer:2.0.0
2.0.0: Pulling from hyperledger/fabric-peer
...
===> List out hyperledger docker images
hyperledger/fabric-ca          1.4                 3b96a893c1e4        5 weeks ago         150MB
hyperledger/fabric-ca          1.4.6               3b96a893c1e4        5 weeks ago         150MB
hyperledger/fabric-ca          latest              3b96a893c1e4        5 weeks ago         150MB
hyperledger/fabric-tools       2.0                 639ab50feac9        2 months ago        514MB
hyperledger/fabric-tools       2.0.0               639ab50feac9        2 months ago        514MB
hyperledger/fabric-tools       latest              639ab50feac9        2 months ago        514MB
hyperledger/fabric-peer        2.0                 5f8a6b13db9f        2 months ago        57.2MB
hyperledger/fabric-peer        2.0.0               5f8a6b13db9f        2 months ago        57.2MB
hyperledger/fabric-peer        latest              5f8a6b13db9f        2 months ago        57.2MB
hyperledger/fabric-orderer     2.0                 161632cc3c59        2 months ago        39.7MB
hyperledger/fabric-orderer     2.0.0               161632cc3c59        2 months ago        39.7MB
hyperledger/fabric-orderer     latest              161632cc3c59        2 months ago        39.7MB
hyperledger/fabric-ccenv       2.0                 6514ca872b68        2 months ago        529MB
hyperledger/fabric-ccenv       2.0.0               6514ca872b68        2 months ago        529MB
hyperledger/fabric-ccenv       latest              6514ca872b68        2 months ago        529MB
hyperledger/fabric-baseos      2.0                 50075bc26291        2 months ago        6.9MB
hyperledger/fabric-baseos      2.0.0               50075bc26291        2 months ago        6.9MB
hyperledger/fabric-baseos      latest              50075bc26291        2 months ago        6.9MB
hyperledger/fabric-javaenv     2.0                 ac433f4353e4        2 months ago        507MB
hyperledger/fabric-javaenv     2.0.0               ac433f4353e4        2 months ago        507MB
hyperledger/fabric-javaenv     latest              ac433f4353e4        2 months ago        507MB
hyperledger/fabric-nodeenv     2.0                 c7fe428889ec        2 months ago        274MB
hyperledger/fabric-nodeenv     2.0.0               c7fe428889ec        2 months ago        274MB
hyperledger/fabric-nodeenv     latest              c7fe428889ec        2 months ago        274MB
hyperledger/fabric-zookeeper   0.4                 ede9389347db        5 months ago        276MB
hyperledger/fabric-zookeeper   0.4.18              ede9389347db        5 months ago        276MB
hyperledger/fabric-zookeeper   latest              ede9389347db        5 months ago        276MB
hyperledger/fabric-kafka       0.4                 caaae0474ef2        5 months ago        270MB
hyperledger/fabric-kafka       0.4.18              caaae0474ef2        5 months ago        270MB
hyperledger/fabric-kafka       latest              caaae0474ef2        5 months ago        270MB
hyperledger/fabric-couchdb     0.4                 d369d4eaa0fd        5 months ago        261MB
hyperledger/fabric-couchdb     0.4.18              d369d4eaa0fd        5 months ago        261MB
hyperledger/fabric-couchdb     latest              d369d4eaa0fd        5 months ago        261MB
'bin/configtxgen' -> '/home/ericma/go/bin/configtxgen'
'bin/configtxlator' -> '/home/ericma/go/bin/configtxlator'
'bin/cryptogen' -> '/home/ericma/go/bin/cryptogen'
'bin/discover' -> '/home/ericma/go/bin/discover'
'bin/fabric-ca-client' -> '/home/ericma/go/bin/fabric-ca-client'
'bin/fabric-ca-server' -> '/home/ericma/go/bin/fabric-ca-server'
'bin/idemixgen' -> '/home/ericma/go/bin/idemixgen'
'bin/orderer' -> '/home/ericma/go/bin/orderer'
'bin/peer' -> '/home/ericma/go/bin/peer'

Now start test-network ...
Starting nodes with CLI timeout of '5' tries and CLI delay of '3' seconds and using database 'leveldb' with crypto from 'cryptogen'

LOCAL_VERSION=2.0.0
DOCKER_IMAGE_VERSION=2.0.0
/home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/../bin/cryptogen

##########################################################
##### Generate certificates using cryptogen tool #########
##########################################################

##########################################################
############ Create Org1 Identities ######################
##########################################################
+ cryptogen generate --config=./organizations/cryptogen/crypto-config-org1.yaml --output=organizations
org1.example.com
+ res=0
+ set +x
##########################################################
############ Create Org2 Identities ######################
##########################################################
+ cryptogen generate --config=./organizations/cryptogen/crypto-config-org2.yaml --output=organizations
org2.example.com
+ res=0
+ set +x
##########################################################
############ Create Orderer Org Identities ###############
##########################################################
+ cryptogen generate --config=./organizations/cryptogen/crypto-config-orderer.yaml --output=organizations
+ res=0
+ set +x

Generate CCP files for Org1 and Org2
/home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/../bin/configtxgen
#########  Generating Orderer Genesis block ##############
+ configtxgen -profile TwoOrgsOrdererGenesis -channelID system-channel -outputBlock ./system-genesis-block/genesis.block
2020-04-07 17:36:36.343 UTC [common.tools.configtxgen] main -> INFO 001 Loading configuration
2020-04-07 17:36:36.378 UTC [common.tools.configtxgen.localconfig] completeInitialization -> INFO 002 orderer type: etcdraft
2020-04-07 17:36:36.378 UTC [common.tools.configtxgen.localconfig] completeInitialization -> INFO 003 Orderer.EtcdRaft.Options unset, setting to tick_interval:"500ms" election_tick:10 heartbeat_tick:1 max_inflight_blocks:5 snapshot_interval_size:16777216 
2020-04-07 17:36:36.378 UTC [common.tools.configtxgen.localconfig] Load -> INFO 004 Loaded configuration: /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/configtx/configtx.yaml
2020-04-07 17:36:36.382 UTC [common.tools.configtxgen] doOutputBlock -> INFO 005 Generating genesis block
2020-04-07 17:36:36.383 UTC [common.tools.configtxgen] doOutputBlock -> INFO 006 Writing genesis block
+ res=0
+ set +x
Creating network "net_test" with the default driver
Creating volume "net_peer0.org1.example.com" with default driver
Creating volume "net_peer0.org2.example.com" with default driver
Creating volume "net_orderer.example.com" with default driver
Creating peer0.org1.example.com ... 
Creating orderer.example.com ... 
Creating peer0.org2.example.com ... 
Creating peer0.org1.example.com
Creating peer0.org2.example.com
Creating peer0.org1.example.com ... done
CONTAINER ID        IMAGE                               COMMAND             CREATED             STATUS                  PORTS                              NAMES
4bc71ea46a7b        hyperledger/fabric-orderer:latest   "orderer"           5 seconds ago       Up 1 second             0.0.0.0:7050->7050/tcp             orderer.example.com
7ee825162895        hyperledger/fabric-peer:latest      "peer node start"   5 seconds ago       Up Less than a second   0.0.0.0:7051->7051/tcp             peer0.org1.example.com
b0ab9e02b101        hyperledger/fabric-peer:latest      "peer node start"   5 seconds ago       Up 2 seconds            7051/tcp, 0.0.0.0:9051->9051/tcp   peer0.org2.example.com

Congratulations! Your Hyperledger Fabric 2.0.0 test network is up.

Will create channel and register chaincode after a while...

Creating channel mychannel ...
Creating channel 'mychannel'.

If network is not up, starting nodes with CLI timeout of '5' tries and CLI delay of '3' seconds and using database 'leveldb 

### Generating channel configuration transaction 'mychannel.tx' ###
+ configtxgen -profile TwoOrgsChannel -outputCreateChannelTx ./channel-artifacts/mychannel.tx -channelID mychannel
2020-04-07 17:36:50.013 UTC [common.tools.configtxgen] main -> INFO 001 Loading configuration
2020-04-07 17:36:50.069 UTC [common.tools.configtxgen.localconfig] Load -> INFO 002 Loaded configuration: /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/configtx/configtx.yaml
2020-04-07 17:36:50.069 UTC [common.tools.configtxgen] doOutputChannelCreateTx -> INFO 003 Generating new channel configtx
2020-04-07 17:36:50.081 UTC [common.tools.configtxgen] doOutputChannelCreateTx -> INFO 004 Writing new channel tx
+ res=0
+ set +x

### Generating channel configuration transaction 'mychannel.tx' ###
#######    Generating anchor peer update for Org1MSP  ##########
+ configtxgen -profile TwoOrgsChannel -outputAnchorPeersUpdate ./channel-artifacts/Org1MSPanchors.tx -channelID mychannel -asOrg Org1MSP
2020-04-07 17:36:50.139 UTC [common.tools.configtxgen] main -> INFO 001 Loading configuration
2020-04-07 17:36:50.189 UTC [common.tools.configtxgen.localconfig] Load -> INFO 002 Loaded configuration: /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/configtx/configtx.yaml
2020-04-07 17:36:50.189 UTC [common.tools.configtxgen] doOutputAnchorPeersUpdate -> INFO 003 Generating anchor peer update
2020-04-07 17:36:50.196 UTC [common.tools.configtxgen] doOutputAnchorPeersUpdate -> INFO 004 Writing anchor peer update
+ res=0
+ set +x

#######    Generating anchor peer update for Org2MSP  ##########
+ configtxgen -profile TwoOrgsChannel -outputAnchorPeersUpdate ./channel-artifacts/Org2MSPanchors.tx -channelID mychannel -asOrg Org2MSP
2020-04-07 17:36:50.248 UTC [common.tools.configtxgen] main -> INFO 001 Loading configuration
2020-04-07 17:36:50.290 UTC [common.tools.configtxgen.localconfig] Load -> INFO 002 Loaded configuration: /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/configtx/configtx.yaml
2020-04-07 17:36:50.290 UTC [common.tools.configtxgen] doOutputAnchorPeersUpdate -> INFO 003 Generating anchor peer update
2020-04-07 17:36:50.292 UTC [common.tools.configtxgen] doOutputAnchorPeersUpdate -> INFO 004 Writing anchor peer update
+ res=0
+ set +x

Creating channel mychannel
+ peer channel create -o localhost:7050 -c mychannel --ordererTLSHostnameOverride orderer.example.com -f ./channel-artifacts/mychannel.tx --outputBlock ./channel-artifacts/mychannel.block --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
+ res=0
+ set +x
2020-04-07 17:36:53.581 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2020-04-07 17:36:53.632 UTC [cli.common] readBlock -> INFO 002 Expect block, but got status: &{NOT_FOUND}
2020-04-07 17:36:53.635 UTC [channelCmd] InitCmdFactory -> INFO 003 Endorser and orderer connections initialized
2020-04-07 17:36:53.845 UTC [cli.common] readBlock -> INFO 004 Expect block, but got status: &{SERVICE_UNAVAILABLE}
2020-04-07 17:36:53.852 UTC [channelCmd] InitCmdFactory -> INFO 005 Endorser and orderer connections initialized
2020-04-07 17:36:54.054 UTC [cli.common] readBlock -> INFO 006 Expect block, but got status: &{SERVICE_UNAVAILABLE}
2020-04-07 17:36:54.058 UTC [channelCmd] InitCmdFactory -> INFO 007 Endorser and orderer connections initialized
2020-04-07 17:36:54.261 UTC [cli.common] readBlock -> INFO 008 Expect block, but got status: &{SERVICE_UNAVAILABLE}
2020-04-07 17:36:54.265 UTC [channelCmd] InitCmdFactory -> INFO 009 Endorser and orderer connections initialized
2020-04-07 17:36:54.468 UTC [cli.common] readBlock -> INFO 00a Expect block, but got status: &{SERVICE_UNAVAILABLE}
2020-04-07 17:36:54.473 UTC [channelCmd] InitCmdFactory -> INFO 00b Endorser and orderer connections initialized
2020-04-07 17:36:54.681 UTC [cli.common] readBlock -> INFO 00c Received block: 0
===================== Channel 'mychannel' created ===================== 

Join Org1 peers to the channel...
+ peer channel join -b ./channel-artifacts/mychannel.block
+ res=0
+ set +x
2020-04-07 17:36:57.941 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2020-04-07 17:36:58.058 UTC [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel

Join Org2 peers to the channel...
+ peer channel join -b ./channel-artifacts/mychannel.block
+ res=0
+ set +x
2020-04-07 17:37:01.138 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2020-04-07 17:37:01.232 UTC [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel

Updating anchor peers for org1...
+ peer channel update -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com -c mychannel -f ./channel-artifacts/Org1MSPanchors.tx --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
+ res=0
+ set +x
2020-04-07 17:37:01.293 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2020-04-07 17:37:01.318 UTC [channelCmd] update -> INFO 002 Successfully submitted channel update
===================== Anchor peers updated for org 'Org1MSP' on channel 'mychannel' ===================== 

Updating anchor peers for org2...
+ peer channel update -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com -c mychannel -f ./channel-artifacts/Org2MSPanchors.tx --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
+ res=0
+ set +x
2020-04-07 17:37:04.442 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2020-04-07 17:37:04.456 UTC [channelCmd] update -> INFO 002 Successfully submitted channel update
===================== Anchor peers updated for org 'Org2MSP' on channel 'mychannel' ===================== 

========= Channel successfully joined =========== 

Create a chaincode in go ...
deploying chaincode on channel 'mychannel'

Vendoring Go dependencies ...
~/go/src/github.com/hyperledger/fabric-samples/chaincode/fabcar/go ~/go/src/github.com/hyperledger/fabric-samples/test-network
go: downloading github.com/hyperledger/fabric-contract-api-go v0.0.0-20191118113407-4c6ff12b4f96
go: extracting github.com/hyperledger/fabric-contract-api-go v0.0.0-20191118113407-4c6ff12b4f96
go: downloading github.com/xeipuuv/gojsonschema v1.2.0
go: downloading github.com/hyperledger/fabric-protos-go v0.0.0-20191114160927-6bee4929a99f
go: downloading github.com/hyperledger/fabric-chaincode-go v0.0.0-20191108205148-17c4b2760b56
go: downloading github.com/go-openapi/spec v0.19.4
go: downloading github.com/gobuffalo/packr v1.30.1
go: extracting github.com/xeipuuv/gojsonschema v1.2.0
go: extracting github.com/hyperledger/fabric-chaincode-go v0.0.0-20191108205148-17c4b2760b56
go: extracting github.com/gobuffalo/packr v1.30.1
go: extracting github.com/hyperledger/fabric-protos-go v0.0.0-20191114160927-6bee4929a99f
go: downloading google.golang.org/grpc v1.23.0
go: extracting github.com/go-openapi/spec v0.19.4
go: downloading github.com/gobuffalo/packd v0.3.0
go: downloading github.com/golang/protobuf v1.3.2
go: extracting github.com/gobuffalo/packd v0.3.0
go: extracting github.com/golang/protobuf v1.3.2
go: extracting google.golang.org/grpc v1.23.0
go: downloading golang.org/x/net v0.0.0-20190827160401-ba9fcec4b297
go: downloading github.com/go-openapi/swag v0.19.5
go: downloading github.com/xeipuuv/gojsonreference v0.0.0-20180127040603-bd5ef7bd5415
go: extracting github.com/go-openapi/swag v0.19.5
go: downloading google.golang.org/genproto v0.0.0-20180831171423-11092d34479b
go: extracting github.com/xeipuuv/gojsonreference v0.0.0-20180127040603-bd5ef7bd5415
go: downloading github.com/gobuffalo/envy v1.7.0
go: downloading github.com/go-openapi/jsonreference v0.19.2
go: downloading golang.org/x/sys v0.0.0-20190710143415-6ec70d6a5542
go: downloading github.com/xeipuuv/gojsonpointer v0.0.0-20180127040702-4e3ac2762d5f
go: downloading github.com/mailru/easyjson v0.0.0-20190626092158-b2ccc519800e
go: extracting golang.org/x/net v0.0.0-20190827160401-ba9fcec4b297
go: downloading gopkg.in/yaml.v2 v2.2.2
go: downloading github.com/go-openapi/jsonpointer v0.19.3
go: extracting github.com/go-openapi/jsonreference v0.19.2
go: extracting github.com/gobuffalo/envy v1.7.0
go: downloading github.com/rogpeppe/go-internal v1.3.0
go: downloading github.com/joho/godotenv v1.3.0
go: downloading golang.org/x/text v0.3.2
go: extracting github.com/xeipuuv/gojsonpointer v0.0.0-20180127040702-4e3ac2762d5f
go: extracting google.golang.org/genproto v0.0.0-20180831171423-11092d34479b
go: extracting github.com/go-openapi/jsonpointer v0.19.3
go: extracting gopkg.in/yaml.v2 v2.2.2
go: downloading github.com/PuerkitoBio/purell v1.1.1
go: extracting github.com/mailru/easyjson v0.0.0-20190626092158-b2ccc519800e
go: extracting github.com/joho/godotenv v1.3.0
go: extracting github.com/rogpeppe/go-internal v1.3.0
go: extracting golang.org/x/sys v0.0.0-20190710143415-6ec70d6a5542
go: extracting github.com/PuerkitoBio/purell v1.1.1
go: downloading github.com/PuerkitoBio/urlesc v0.0.0-20170810143723-de5bf2ad4578
go: extracting github.com/PuerkitoBio/urlesc v0.0.0-20170810143723-de5bf2ad4578
go: extracting golang.org/x/text v0.3.2
~/go/src/github.com/hyperledger/fabric-samples/test-network
Finished vendoring Go dependencies
++ peer lifecycle chaincode package fabcar.tar.gz --path ../chaincode/fabcar/go/ --lang golang --label fabcar_1
++ res=0
++ set +x
===================== Chaincode is packaged on peer0.org1 ===================== 

Installing chaincode on peer0.org1...
++ peer lifecycle chaincode install fabcar.tar.gz
++ res=0
++ set +x
2020-04-07 17:37:42.393 UTC [cli.lifecycle.chaincode] submitInstallProposal -> INFO 001 Installed remotely: response: 
2020-04-07 17:37:42.393 UTC [cli.lifecycle.chaincode] submitInstallProposal -> INFO 002 Chaincode code package identifier: fabcar_1:8b2412113ee33b4615f83b24636f442913c033049a2dc36f46fe4614b96ab1d3
===================== Chaincode is installed on peer0.org1 ===================== 

Install chaincode on peer0.org2...
++ peer lifecycle chaincode install fabcar.tar.gz
++ res=0
++ set +x
2020-04-07 17:37:59.033 UTC [cli.lifecycle.chaincode] submitInstallProposal -> INFO 001 Installed remotely: response: 
2020-04-07 17:37:59.033 UTC [cli.lifecycle.chaincode] submitInstallProposal -> INFO 002 Chaincode code package identifier: fabcar_1:8b2412113ee33b4615f83b24636f442913c033049a2dc36f46fe4614b96ab1d3
===================== Chaincode is installed on peer0.org2 ===================== 

++ peer lifecycle chaincode queryinstalled
++ res=0
++ set +x
Installed chaincodes on peer:
Package ID: fabcar_1:8b2412113ee33b4615f83b24636f442913c033049a2dc36f46fe4614b96ab1d3, Label: fabcar_1
PackageID is fabcar_1:8b2412113ee33b4615f83b24636f442913c033049a2dc36f46fe4614b96ab1d3
===================== Query installed successful on peer0.org1 on channel ===================== 

++ peer lifecycle chaincode approveformyorg -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --name fabcar --version 1 --init-required --package-id fabcar_1:8b2412113ee33b4615f83b24636f442913c033049a2dc36f46fe4614b96ab1d3 --sequence 1
++ set +x
2020-04-07 17:38:01.388 UTC [chaincodeCmd] ClientWait -> INFO 001 txid [28c997c2a6ba807117328c99abf86ba30cc644ac4b2fa13dc518a38de5e3e388] committed with status (VALID) at 
===================== Chaincode definition approved on peer0.org1 on channel 'mychannel' ===================== 

===================== Checking the commit readiness of the chaincode definition on peer0.org1 on channel 'mychannel'... ===================== 
Attempting to check the commit readiness of the chaincode definition on peer0.org1 secs
++ peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name fabcar --version 1 --sequence 1 --output json --init-required
++ res=0
++ set +x

{
    "approvals": {
        "Org1MSP": true,
        "Org2MSP": false
    }
}
===================== Checking the commit readiness of the chaincode definition successful on peer0.org1 on channel 'mychannel' ===================== 
===================== Checking the commit readiness of the chaincode definition on peer0.org2 on channel 'mychannel'... ===================== 
Attempting to check the commit readiness of the chaincode definition on peer0.org2 secs
++ peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name fabcar --version 1 --sequence 1 --output json --init-required
++ res=0
++ set +x

{
    "approvals": {
        "Org1MSP": true,
        "Org2MSP": false
    }
}
===================== Checking the commit readiness of the chaincode definition successful on peer0.org2 on channel 'mychannel' ===================== 
++ peer lifecycle chaincode approveformyorg -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --name fabcar --version 1 --init-required --package-id fabcar_1:8b2412113ee33b4615f83b24636f442913c033049a2dc36f46fe4614b96ab1d3 --sequence 1
++ set +x
2020-04-07 17:38:09.805 UTC [chaincodeCmd] ClientWait -> INFO 001 txid [bd1cecbf598eb9b0f49d170d6ef095b99107b6ca7983e53a2b37f5a56e50d22e] committed with status (VALID) at 
===================== Chaincode definition approved on peer0.org2 on channel 'mychannel' ===================== 

===================== Checking the commit readiness of the chaincode definition on peer0.org1 on channel 'mychannel'... ===================== 
Attempting to check the commit readiness of the chaincode definition on peer0.org1 secs
++ peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name fabcar --version 1 --sequence 1 --output json --init-required
++ res=0
++ set +x

{
    "approvals": {
        "Org1MSP": true,
        "Org2MSP": true
    }
}
===================== Checking the commit readiness of the chaincode definition successful on peer0.org1 on channel 'mychannel' ===================== 
===================== Checking the commit readiness of the chaincode definition on peer0.org2 on channel 'mychannel'... ===================== 
Attempting to check the commit readiness of the chaincode definition on peer0.org2 secs
++ peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name fabcar --version 1 --sequence 1 --output json --init-required
++ res=0
++ set +x

{
    "approvals": {
        "Org1MSP": true,
        "Org2MSP": true
    }
}
===================== Checking the commit readiness of the chaincode definition successful on peer0.org2 on channel 'mychannel' ===================== 
++ peer lifecycle chaincode commit -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --name fabcar --peerAddresses localhost:7051 --tlsRootCertFiles /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses localhost:9051 --tlsRootCertFiles /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt --version 1 --sequence 1 --init-required
++ res=0
++ set +x
2020-04-07 17:38:18.265 UTC [chaincodeCmd] ClientWait -> INFO 001 txid [8e85e8ab6040469007adbd73ba26a95c52697b51441248502051bb47af6d276b] committed with status (VALID) at localhost:7051
2020-04-07 17:38:18.294 UTC [chaincodeCmd] ClientWait -> INFO 002 txid [8e85e8ab6040469007adbd73ba26a95c52697b51441248502051bb47af6d276b] committed with status (VALID) at localhost:9051
===================== Chaincode definition committed on channel 'mychannel' ===================== 

===================== Querying chaincode definition on peer0.org1 on channel 'mychannel'... ===================== 

2020-04-07 17:38:18.265 UTC [chaincodeCmd] ClientWait -> INFO 001 txid [8e85e8ab6040469007adbd73ba26a95c52697b51441248502051bb47af6d276b] committed with status (VALID) at localhost:7051
2020-04-07 17:38:18.294 UTC [chaincodeCmd] ClientWait -> INFO 002 txid [8e85e8ab6040469007adbd73ba26a95c52697b51441248502051bb47af6d276b] committed with status (VALID) at localhost:9051
===================== Query chaincode definition successful on peer0.org1 on channel 'mychannel' ===================== 
===================== Querying chaincode definition on peer0.org2 on channel 'mychannel'... ===================== 
Attempting to Query committed status on peer0.org2, Retry after 3 seconds.
++ peer lifecycle chaincode querycommitted --channelID mychannel --name fabcar
++ res=0
++ set +x

Committed chaincode definition for chaincode 'fabcar' on channel 'mychannel':
Version: 1, Sequence: 1, Endorsement Plugin: escc, Validation Plugin: vscc, Approvals: [Org1MSP: true, Org2MSP: true]
===================== Query chaincode definition successful on peer0.org2 on channel 'mychannel' ===================== 
++ peer chaincode invoke -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -n fabcar --peerAddresses localhost:7051 --tlsRootCertFiles /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses localhost:9051 --tlsRootCertFiles /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt --isInit -c '{"function":"initLedger","Args":[]}'
++ res=0
++ set +x
2020-04-07 17:38:21.498 UTC [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200 
===================== Invoke transaction successful on peer0.org1 peer0.org2 on channel 'mychannel' ===================== 

++ peer chaincode invoke -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls true --cafile /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -n fabcar --peerAddresses localhost:7051 --tlsRootCertFiles /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses localhost:9051 --tlsRootCertFiles /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt -c '{"function":"initLedger","Args":[]}'
++ res=0
++ set +x
2020-04-07 17:38:31.615 UTC [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200 
===================== Invoke transaction successful on peer0.org1 peer0.org2 on channel 'mychannel' ===================== 

Querying chaincode on peer0.org1...
===================== Querying on peer0.org1 on channel 'mychannel'... ===================== 
Attempting to Query peer0.org1 ...1586281114 secs
++ peer chaincode query -C mychannel -n fabcar -c '{"Args":["queryAllCars"]}'
++ res=0
++ set +x

[{"Key":"CAR0","Record":{"make":"Toyota","model":"Prius","colour":"blue","owner":"Tomoko"}},{"Key":"CAR1","Record":{"make":"Ford","model":"Mustang","colour":"red","owner":"Brad"}},{"Key":"CAR2","Record":{"make":"Hyundai","model":"Tucson","colour":"green","owner":"Jin Soo"}},{"Key":"CAR3","Record":{"make":"Volkswagen","model":"Passat","colour":"yellow","owner":"Max"}},{"Key":"CAR4","Record":{"make":"Tesla","model":"S","colour":"black","owner":"Adriana"}},{"Key":"CAR5","Record":{"make":"Peugeot","model":"205","colour":"purple","owner":"Michel"}},{"Key":"CAR6","Record":{"make":"Chery","model":"S22L","colour":"white","owner":"Aarav"}},{"Key":"CAR7","Record":{"make":"Fiat","model":"Punto","colour":"violet","owner":"Pari"}},{"Key":"CAR8","Record":{"make":"Tata","model":"Nano","colour":"indigo","owner":"Valeria"}},{"Key":"CAR9","Record":{"make":"Holden","model":"Barina","colour":"brown","owner":"Shotaro"}}]
===================== Query successful on peer0.org1 on channel 'mychannel' ===================== 

**** Congratulations! ****
Your Hyperledger Fabric 2.0.0 test network with channel mychannel and chaincode fabcar is ready. Enjoy.

To shutdown the network, first logout and then login again, then run:
cd /home/ericma/go/src/github.com/hyperledger/fabric-samples/test-network && ./network.sh down

翻译自: https://www.systutorials.com/how-to-install-hyperledger-fabric-2-0-in-ubuntu-18-04/

你可能感兴趣的:(docker,ubuntu,linux,vnc,windbg)

  • android系统selinux中添加新属性property 辉色投像
    1.定位/android/system/sepolicy/private/property_contexts声明属性开头：persist.charge声明属性类型：u:object_r:system_prop:s0图12.定位到android/system/sepolicy/public/domain.te删除neverallow{domain-init}default_prop:property
  • Linux下QT开发的动态库界面弹出操作（SDL2） 13jjyao QT类qt开发语言sdl2linux
    需求：操作系统为linux，开发框架为qt，做成需带界面的qt动态库，调用方为java等非qt程序难点：调用方为java等非qt程序，也就是说调用方肯定不带QApplication::exec()，缺少了这个，QTimer等事件和QT创建的窗口将不能弹出(包括opencv也是不能弹出)；这与qt调用本身qt库是有本质的区别的思路：1.调用方缺QApplication::exec()，那么我们在接口
  • linux sdl windows.h,Windows下的SDL安装 奔跑吧linux内核 linuxsdlwindows.h
    首先你要下载并安装SDL开发包。如果装在C盘下，路径为C:\SDL1.2.5如果在WINDOWS下。你可以按以下步骤：1.打开VC++，点击"Tools",Options2,点击directories选项3.选择"Includefiles"增加一个新的路径。"C:\SDL1.2.5\include"4，现在选择"Libaryfiles“增加"C:\SDL1.2.5\lib"现在你可以开始编写你的第
  • linux中sdl的使用教程,sdl使用入门 Melissa Corvinus linux中sdl的使用教程
    本文通过一个简单示例讲解SDL的基本使用流程。示例中展示一个窗口，窗口里面有个随机颜色快随机移动。当我们鼠标点击关闭按钮时间窗口关闭。基本步骤如下：1.初始化SDL并创建一个窗口。SDL_Init()初始化SDL_CreateWindow()创建窗口2.纹理渲染存储RGB和存储纹理的区别：比如一个从左到右由红色渐变到蓝色的矩形，用存储RGB的话就需要把矩形中每个点的具体颜色值存储下来；而纹理只是一
  • PHP环境搭建详细教程 好看资源平台 前端php
    PHP是一个流行的服务器端脚本语言，广泛用于Web开发。为了使PHP能够在本地或服务器上运行，我们需要搭建一个合适的PHP环境。本教程将结合最新资料，介绍在不同操作系统上搭建PHP开发环境的多种方法，包括Windows、macOS和Linux系统的安装步骤，以及本地和Docker环境的配置。1.PHP环境搭建概述PHP环境的搭建主要分为以下几类：集成开发环境：例如XAMPP、WAMP、MAMP，这
  • 使用 FinalShell 进行远程连接（ssh 远程连接 Linux 服务器） 编程经验分享 开发工具服务器sshlinux
    目录前言基本使用教程新建远程连接连接主机自定义命令路由追踪前言后端开发，必然需要和服务器打交道，部署应用，排查问题，查看运行日志等等。一般服务器都是集中部署在机房中，也有一些直接是云服务器，总而言之，程序员不可能直接和服务器直接操作，一般都是通过ssh连接来登录服务器。刚接触远程连接时，使用的是XSHELL来远程连接服务器，连接上就能够操作远程服务器了，但是仅用XSHELL并没有上传下载文件的功能
  • 在一台Ubuntu计算机上构建Hyperledger Fabric网络 落叶无声9 区块链超级账本Hyperledgerfabric区块链ubuntu构建hyperledgerfabric
    在一台Ubuntu计算机上构建HyperledgerFabric网络Hyperledgerfabric是一个开源的区块链应用程序平台，为开发基于区块链的应用程序提供了一个起点。当我们提到HyperledgerFabric网络时，我们指的是使用HyperledgerFabric的正在运行的系统。即使只使用最少数量的组件，部署Fabric网络也不是一件容易的事。Fabric社区创建了一个名为Cello
  • libyuv之linux编译 jaronho Linuxlinux运维服务器
    文章目录一、下载源码二、编译源码三、注意事项1、银河麒麟系统（aarch64）（1）解决armv8-a+dotprod+i8mm指令集支持问题（2）解决armv9-a+sve2指令集支持问题一、下载源码到GitHub网站下载https://github.com/lemenkov/libyuv源码，或者用直接用git克隆到本地，如：gitclonehttps://github.com/lemenko
  • ARM驱动学习之5 LEDS驱动 JT灬新一 嵌入式C底层arm开发学习单片机
    ARM驱动学习之5LEDS驱动知识点：•linuxGPIO申请函数和赋值函数–gpio_request–gpio_set_value•三星平台配置GPIO函数–s3c_gpio_cfgpin•GPIO配置输出模式的宏变量–S3C_GPIO_OUTPUT注意点：DRIVER_NAME和DEVICE_NAME匹配。实现步骤：1.加入需要的头文件：//Linux平台的gpio头文件#include//三
  • 【华为OD技术面试真题精选 - 非技术题】 -HR面，综合面_华为od hr面 一个射手座的程序媛 程序员华为od面试职场和发展
    最后的话最近很多小伙伴找我要Linux学习资料，于是我翻箱倒柜，整理了一些优质资源，涵盖视频、电子书、PPT等共享给大家！资料预览给大家整理的视频资料：给大家整理的电子书资料：如果本文对你有帮助，欢迎点赞、收藏、转发给朋友，让我有持续创作的动力！网上学习资料一大堆，但如果学到的知识不成体系，遇到问题时只是浅尝辄止，不再深入研究，那么很难做到真正的技术提升。需要这份系统化的资料的朋友，可以点击这里获
  • docker igotyback eureka云原生
    Docker容器的文件系统是隔离的，但是可以通过挂载卷（Volumes）或绑定挂载（BindMounts）将宿主机的文件系统目录映射到容器内部。要查看Docker容器的映射路径，可以使用以下方法：查看容器配置：使用dockerinspect命令可以查看容器的详细配置信息，包括挂载的卷。例如：bashdockerinspect在输出的JSON格式中，查找"Mounts"部分，这里会列出所有的挂载信息
  • 简介Shell、zsh、bash zhaosuningsn Shellzshbashshelllinuxbash
    Shell是Linux和Unix的外壳，类似衣服，负责外界与Linux和Unix内核的交互联系。例如接收终端用户及各种应用程序的命令，把接收的命令翻译成内核能理解的语言，传递给内核，并把内核处理接收的命令的结果返回给外界，即Shell是外界和内核沟通的桥梁或大门。Linux和Unix提供了多种Shell，其中有种bash，当然还有其他好多种。Mac电脑中不但有bash，还有一个zsh，预装的，据说
  • 在Ubuntu中编译含有JSON的文件出现报错 芝麻糊76 Linuxkill_buglinuxubuntujson
    在ubuntu中进行JSON相关学习的时候，我发现了一些小问题，决定与大家进行分享，减少踩坑时候出现不必要的时间耗费截取部分含有JSON部分的代码进行展示char*str="{\"title\":\"JSONExample\",\"author\":{\"name\":\"JohnDoe\",\"age\":35,\"isVerified\":true},\"tags\":[\"json\",\"
  • Linux MariaDB使用OpenSSL安装SSL证书 Meta39 MySQLOracleMariaDBLinuxWindowsssllinuxmariadb
    进入到证书存放目录，批量删除.pem证书警告：确保已经进入到证书存放目录find.-typef-iname\*.pem-delete查看是否安装OpenSSLopensslversion没有则安装yuminstallopensslopenssl-devel开启SSL编辑/etc/my.cnf文件（没有的话就创建，但是要注意，在/etc/my.cnf.d/server.cnf配置了datadir的，
  • ExpRe[25] bash外的其它shell：zsh和fish tritone ExpRebashlinuxubuntushell
    文章目录zsh基础配置实用特性插件`autojump`语法高亮自动补全fish优点缺点时效性本篇撰写时间为2021.12.15，由于计算机技术日新月异，博客中所有内容都有时效和版本限制，具体做法不一定总行得通，链接可能改动失效，各种软件的用法可能有修改。但是其中透露的思想往往是值得学习的。本篇前置：ExpRe[10]Ubuntu[2]准备神秘软件、备份恢复软件https://www.cnblogs
  • 【从浅识到熟知Linux】Linux发展史 Jammingpro 从浅学到熟知Linuxlinux运维服务器
    归属专栏：从浅学到熟知Linux个人主页：Jammingpro每日努力一点点，技术变化看得见文章前言：本篇文章记录Linux发展的历史，因在介绍Linux过程中涉及的其他操作系统及人物，本文对相关内容也有所介绍。文章目录Unix发展史Linux发展史开源Linux官网企业应用情况发行版本在学习Linux前，我们可能都会问Linux从哪里来？它是如何发展的。但在介绍Linux之前，需要先介绍一下Un
  • linux 发展史 种树的猴子 内核java操作系统linux大数据
    linux发展史说明此前对linux认识模糊一知半解，近期通过学习将自己对于linux的发展总结一下方便大家日后的学习。那Linux是目前一款非常火热的开源操作系统，可是linux是什么时候出现的，又是因为什么样的原因被开发出来的呢。以下将对linux的发展历程进行详细的讲解。目录一、Linux发展背景二、UINIX的诞生三、UNIX的重要分支-BSD的诞生四、Minix的诞生五、GNU与Free
  • Linux sh命令 fengyehongWorld Linuxlinux
    目录一.基本语法二.选项2.1-c字符串中读取内容，并执行2.1.1基本用法2.1.2获取当前目录下失效的超链接2.2-x每个命令执行之前，将其打印出来2.3结合Here文档使用一.基本语法⏹Linux和Unix系统中用于执行shell脚本或运行命令的命令。sh[选项][脚本文件][参数...]⏹选项-c：从字符串中读取内容，并执行。-x：在每个命令执行之前，将其打印出来。-s：从标准流中读取内容
  • Linux vi常用命令 fengyehongWorld Linuxlinux
    参考资料viコマンド（vimコマンド）リファレンス目录一.保存系命令二.删除系命令三.移动系命令四.复制粘贴系命令一.保存系命令⏹保存并退出:wq⏹强制保存并退出:wq!⏹退出(文件未编辑):q⏹强制退出(忽略已编辑内容):q!⏹另存为:w新文件名二.删除系命令⏹删除当前行dd⏹清空整个文档gg：移动到文档顶部dG：删除到最后一行ggdG三.移动系命令⏹移动到文档顶部gg⏹移动到文档底部#方式1G
  • Linux查看服务器日志 TPBoreas 运维linux运维
    一、tail这个是我最常用的一种查看方式用法如下：tail-n10test.log查询日志尾部最后10行的日志;tail-n+10test.log查询10行之后的所有日志;tail-fn10test.log循环实时查看最后1000行记录(最常用的)一般还会配合着grep用，(实时抓包)例如:tail-fn1000test.log|grep'关键字'（动态抓包）tail-fn1000test.log
  • 06选课支付模块之基于消息队列发送支付通知消息 echo 云清 学成在线javarabbitmq消息队列支付通知学成在线
    消息队列发送支付通知消息需求分析订单服务作为通用服务，在订单支付成功后需要将支付结果异步通知给其他对接的微服务，微服务收到支付结果根据订单的类型去更新自己的业务数据技术方案使用消息队列进行异步通知需要保证消息的可靠性即生产端将消息成功通知到服务端：消息发送到交换机-->由交换机发送到队列-->消费者监听队列，收到消息进行处理，参考文章02-使用Docker安装RabbitMQ-CSDN博客生产者确
  • 笋丁网页自动回复机器人V3.0.0免授权版源码 希希分享 软希网58soho_cn源码资源笋丁网页自动回复机器人
    笋丁网页机器人一款可设置自动回复，默认消息，调用自定义api接口的网页机器人。此程序后端语言使用Golang，内存占用最高不超过30MB，1H1G服务器流畅运行。仅支持Linux服务器部署，不支持虚拟主机，请悉知！使用自定义api功能需要有一定的建站基础。源码下载：https://download.csdn.net/download/m0_66047725/89754250更多资源下载：关注我。安
  • ubuntu安装wordpress lissettecarlr
    1安装nginx网上安装方式很多，这就就直接用apt-get了apt-getinstallnginx不用启动啥，然后直接在浏览器里面输入IP:80就能看到nginx的主页了。如果修改了一些配置可以使用下列命令重启一下systemctlrestartnginx.service2安装mysql输入安装前也可以更新一下软件源，在安装过程中将会让你输入数据库的密码。sudoapt-getinstallmy
  • Linux CTF逆向入门 蚁景网络安全 linux运维CTF
    1.ELF格式我们先来看看ELF文件头，如果想详细了解，可以查看ELF的manpage文档。关于ELF更详细的说明：e_shoff：节头表的文件偏移量（字节）。如果文件没有节头表，则此成员值为零。sh_offset：表示了该section（节）离开文件头部位置的距离+-------------------+|ELFheader|---++--------->+-------------------
  • NPM私库搭建-verdaccio（Linux） Beam007 npmlinux前端
    1、安装nodelinux服务器安装nodea)、官网下载所需的node版本https://nodejs.org/dist/v14.21.0/b)、解压安装包若下载的是xxx.tar.xz文件，解压命令为tar-xvfxxx.tar.xzc)、修改环境变量修改：/etc/profile文件#SETPATHFORNODEJSexportNODE_HOME=NODEJS解压安装的路径exportPAT
  • Ubuntu18.04 Docker部署Kinship(Django)项目过程 Dante617
    1Docker的安装https://blog.csdn.net/weixin_41735055/article/details/1003551792下载镜像dockerpullprogramize/python3.6.8-dlib下载的镜像里包含python3.6.8和dlib19.17.03启动镜像dockerrun-it--namekinship-p7777:80-p3307:3306-p55
  • C++常见知识掌握 nfgo c++开发语言
    1.Linux软件开发、调试与维护内核与系统结构Linux内核是操作系统的核心，负责管理硬件资源，提供系统服务，它是系统软件与硬件之间的桥梁。主要组成部分包括：进程管理：内核通过调度器分配CPU时间给各个进程，实现进程的创建、调度、终止等操作。使用进程描述符（task_struct）来存储进程信息，包括状态（就绪、运行、阻塞等）、优先级、内存映射等。内存管理：包括物理内存和虚拟内存管理。通过页表映
  • docker from指令的含义_多个FROM-含义 weixin_39722188 dockerfrom指令的含义
    小编典典什么是基本图片？一组文件，加上EXPOSE端口ENTRYPOINT和CMD。您可以添加文件并基于该基础图像构建新图像，Dockerfile并以FROM指令开头：后面提到的图像FROM是新图像的“基础图像”。这是否意味着如果我neo4j/neo4j在FROM指令中声明，则在运行映像时，neo数据库将自动运行并且可在端口7474的容器中使用？仅当您不覆盖CMD和时ENTRYPOINT。但是图像
  • Dockerfile FROM 两个 redDelta
    Docker相关视频讲解：什么是容器Docker介绍实现"DockerfileFROM两个"的步骤步骤表格步骤操作1创建一个Dockerfile文件2写入FROM指令3构建第一个镜像4创建第二个Dockerfile文件5写入FROM指令6构建第二个镜像7合并两个镜像操作步骤说明步骤1：创建一个Dockerfile文件使用任意文本编辑器创建一个名为Dockerfile的文件。登录后复制#Docker
  • linux脚本sed替换变量,sed 命令中替换值为shell变量 诺坎普之约 linux脚本sed替换变量
    文章目录sed命令中替换值为shell变量替换基本语法sed中替换使用shell变量总结参考文档sed命令中替换值为shell变量替换基本语法大家都是sed有很多用法，最多就应该是替换一些值了。让我们先回忆sed的替换语法。在sed进行替换的时候sed-i's/old/new/g'1.txtecho"hellooldfrank"|sed's/old/new/g'结果如下：hellonewfrank
  • 项目中 枚举与注解的结合使用 飞翔的马甲 javaenumannotation
    前言：版本兼容，一直是迭代开发头疼的事，最近新版本加上了支持新题型，如果新创建一份问卷包含了新题型，那旧版本客户端就不支持，如果新创建的问卷不包含新题型，那么新旧客户端都支持。这里面我们通过给问卷类型枚举增加自定义注解的方式完成。顺便巩固下枚举与注解。 一、枚举 1.在创建枚举类的时候，该类已继承java.lang.Enum类，所以自定义枚举类无法继承别的类，但可以实现接口。
  • 【Scala十七】Scala核心十一：下划线_的用法 bit1129 scala
    下划线_在Scala中广泛应用，_的基本含义是作为占位符使用。_在使用时是出问题非常多的地方，本文将不断完善_的使用场景以及所表达的含义   1. 在高阶函数中使用 scala> val list = List(-3,8,7,9) list: List[Int] = List(-3, 8, 7, 9) scala> list.filter(_ > 7) r
  • web缓存基础：术语、http报头和缓存策略 dalan_123 Web
    对于很多人来说，去访问某一个站点，若是该站点能够提供智能化的内容缓存来提高用户体验，那么最终该站点的访问者将络绎不绝。缓存或者对之前的请求临时存储，是http协议实现中最核心的内容分发策略之一。分发路径中的组件均可以缓存内容来加速后续的请求，这是受控于对该内容所声明的缓存策略。接下来将讨web内容缓存策略的基本概念，具体包括如如何选择缓存策略以保证互联网范围内的缓存能够正确处理的您的内容，并谈论下
  • crontab 问题 周凡杨 linuxcrontabunix
      一： 0481-079   Reached   a   symbol   that   is   not   expected.   背景： */5   *   *   *   *  /usr/IBMIHS/rsync.sh 
  • 让tomcat支持2级域名共享session g21121 session
    tomcat默认情况下是不支持2级域名共享session的，所有有些情况下登陆后从主域名跳转到子域名会发生链接session不相同的情况，但是只需修改几处配置就可以了。 打开tomcat下conf下context.xml文件 找到Context标签,修改为如下内容 如果你的域名是www.test.com <Context sessionCookiePath="/path&q
  • web报表工具FineReport常用函数的用法总结（数学和三角函数） 老A不折腾 Webfinereport总结
      ABS ABS(number):返回指定数字的绝对值。绝对值是指没有正负符号的数值。 Number:需要求出绝对值的任意实数。 示例: ABS(-1.5)等于1.5。 ABS(0)等于0。 ABS(2.5)等于2.5。   ACOS ACOS(number):返回指定数值的反余弦值。反余弦值为一个角度，返回角度以弧度形式表示。 Number:需要返回角
  • linux 启动java进程 sh文件 墙头上一根草 linuxshelljar
    #!/bin/bash #初始化服务器的进程PId变量 user_pid=0; robot_pid=0; loadlort_pid=0; gateway_pid=0; ######### #检查相关服务器是否启动成功 #说明： #使用JDK自带的JPS命令及grep命令组合，准确查找pid #jps 加 l 参数，表示显示java的完整包路径 #使用awk，分割出pid
  • 我的spring学习笔记5-如何使用ApplicationContext替换BeanFactory aijuans Spring 3 系列
    如何使用ApplicationContext替换BeanFactory？ package onlyfun.caterpillar.device; import org.springframework.beans.factory.BeanFactory; import org.springframework.beans.factory.xml.XmlBeanFactory; import
  • Linux 内存使用方法详细解析 annan211 linux内存Linux内存解析
    来源 http://blog.jobbole.com/45748/ 我是一名程序员，那么我在这里以一个程序员的角度来讲解Linux内存的使用。 一提到内存管理，我们头脑中闪出的两个概念，就是虚拟内存，与物理内存。这两个概念主要来自于linux内核的支持。 Linux在内存管理上份为两级，一级是线性区，类似于00c73000-00c88000，对应于虚拟内存，它实际上不占用
  • 数据库的单表查询常用命令及使用方法(-) 百合不是茶 oracle函数单表查询
        创建数据库;       --建表 create table bloguser(username varchar2(20),userage number(10),usersex char(2));       创建bloguser表,里面有三个字段     &nbs
  • 多线程基础知识 bijian1013 java多线程threadjava多线程
    一．进程和线程 进程就是一个在内存中独立运行的程序，有自己的地址空间。如正在运行的写字板程序就是一个进程。 “多任务”：指操作系统能同时运行多个进程（程序）。如WINDOWS系统可以同时运行写字板程序、画图程序、WORD、Eclipse等。 线程：是进程内部单一的一个顺序控制流。 线程和进程 a.       每个进程都有独立的
  • fastjson简单使用实例 bijian1013 fastjson
    一.简介         阿里巴巴fastjson是一个Java语言编写的高性能功能完善的JSON库。它采用一种“假定有序快速匹配”的算法，把JSON Parse的性能提升到极致，是目前Java语言中最快的JSON库；包括“序列化”和“反序列化”两部分，它具备如下特征：     
  • 【RPC框架Burlap】Spring集成Burlap bit1129 spring
    Burlap和Hessian同属于codehaus的RPC调用框架，但是Burlap已经几年不更新，所以Spring在4.0里已经将Burlap的支持置为Deprecated,所以在选择RPC框架时，不应该考虑Burlap了。 这篇文章还是记录下Burlap的用法吧，主要是复制粘贴了Hessian与Spring集成一文，【RPC框架Hessian四】Hessian与Spring集成  
  • 【Mahout一】基于Mahout 命令参数含义 bit1129 Mahout
    1. mahout seqdirectory   $ mahout seqdirectory --input (-i) input Path to job input directory(原始文本文件). --output (-o) output The directory pathna
  • linux使用flock文件锁解决脚本重复执行问题 ronin47 linux lock　重复执行
    linux的crontab命令，可以定时执行操作，最小周期是每分钟执行一次。关于crontab实现每秒执行可参考我之前的文章《linux crontab 实现每秒执行》现在有个问题，如果设定了任务每分钟执行一次，但有可能一分钟内任务并没有执行完成，这时系统会再执行任务。导致两个相同的任务在执行。 例如： <? //  test .php
  • java-74-数组中有一个数字出现的次数超过了数组长度的一半，找出这个数字 bylijinnan java
    public class OcuppyMoreThanHalf { /** * Q74 数组中有一个数字出现的次数超过了数组长度的一半，找出这个数字 * two solutions: * 1.O(n) * see <beauty of coding>--每次删除两个不同的数字，不改变数组的特性 * 2.O(nlogn) * 排序。中间
  • linux 系统相关命令 candiio linux
    系统参数 cat /proc/cpuinfo  cpu相关参数 cat /proc/meminfo 内存相关参数 cat /proc/loadavg 负载情况 性能参数 1）top M：按内存使用排序 P：按CPU占用排序 1：显示各CPU的使用情况 k：kill进程 o：更多排序规则 回车：刷新数据 2）ulimit ulimit -a：显示本用户的系统限制参
  • [经营与资产]保持独立性和稳定性对于软件开发的重要意义 comsci 软件开发
         一个软件的架构从诞生到成熟，中间要经过很多次的修正和改造       如果在这个过程中，外界的其它行业的资本不断的介入这种软件架构的升级过程中           那么软件开发者原有的设计思想和开发路线
  • 在CentOS5.5上编译OpenJDK6 Cwind linuxOpenJDK
    几番周折终于在自己的CentOS5.5上编译成功了OpenJDK6，将编译过程和遇到的问题作一简要记录，备查。 0. OpenJDK介绍 OpenJDK是Sun（现Oracle）公司发布的基于GPL许可的Java平台的实现。其优点： 1、它的核心代码与同时期Sun（-> Oracle）的产品版基本上是一样的，血统纯正，不用担心性能问题，也基本上没什么兼容性问题；（代码上最主要的差异是
  • java乱码问题 dashuaifu java乱码问题js中文乱码
    swfupload上传文件参数值为中文传递到后台接收中文乱码     在js中用setPostParams（{"tag" : encodeURI( document.getElementByIdx_x("filetag").value，"utf-8")}）; 然后在servlet中String t
  • cygwin很多命令显示command not found的解决办法 dcj3sjt126com cygwin
    cygwin很多命令显示command not found的解决办法   修改cygwin.BAT文件如下 @echo off D: set CYGWIN=tty notitle glob set PATH=%PATH%;d:\cygwin\bin;d:\cygwin\sbin;d:\cygwin\usr\bin;d:\cygwin\usr\sbin;d:\cygwin\us
  • [介绍]从 Yii 1.1 升级 dcj3sjt126com PHPyii2
    2.0 版框架是完全重写的，在 1.1 和 2.0 两个版本之间存在相当多差异。因此从 1.1 版升级并不像小版本间的跨越那么简单，通过本指南你将会了解两个版本间主要的不同之处。 如果你之前没有用过 Yii 1.1，可以跳过本章，直接从"入门篇"开始读起。 请注意，Yii 2.0 引入了很多本章并没有涉及到的新功能。强烈建议你通读整部权威指南来了解所有新特性。这样有可能会发
  • Linux SSH免登录配置总结 eksliang ssh-keygenLinux SSH免登录认证Linux SSH互信
    转载请出自出处：http://eksliang.iteye.com/blog/2187265 一、原理      我们使用ssh-keygen在ServerA上生成私钥跟公钥，将生成的公钥拷贝到远程机器ServerB上后,就可以使用ssh命令无需密码登录到另外一台机器ServerB上。      生成公钥与私钥有两种加密方式，第一种是
  • 手势滑动销毁Activity gundumw100 android
    老是效仿ios，做android的真悲催！ 有需求：需要手势滑动销毁一个Activity 怎么办尼？自己写？ 不用~，网上先问一下百度。 结果： http://blog.csdn.net/xiaanming/article/details/20934541 首先将你需要的Activity继承SwipeBackActivity，它会在你的布局根目录新增一层SwipeBackLay
  • JavaScript变换表格边框颜色 ini JavaScripthtmlWebhtml5css
    效果查看：http://hovertree.com/texiao/js/2.htm代码如下，保存到HTML文件也可以查看效果： <html> <head> <meta charset="utf-8"> <title>表格边框变换颜色代码-何问起</title> </head> <body&
  • Kafka Rest : Confluent kane_xie kafkaRESTconfluent
    最近拿到一个kafka rest的需求，但kafka暂时还没有提供rest api（应该是有在开发中，毕竟rest这么火），上网搜了一下，找到一个Confluent Platform，本文简单介绍一下安装。 这里插一句，给大家推荐一个九尾搜索，原名叫谷粉SOSO，不想fanqiang谷歌的可以用这个。以前在外企用谷歌用习惯了，出来之后用度娘搜技术问题，那匹配度简直感人。 环境声明：Ubu
  • Calender不是单例 men4661273 单例Calender
             在我们使用Calender的时候，使用过Calendar.getInstance()来获取一个日期类的对象，这种方式跟单例的获取方式一样，那么它到底是不是单例呢，如果是单例的话，一个对象修改内容之后，另外一个线程中的数据不久乱套了吗？从试验以及源码中可以得出，Calendar不是单例。 测试： Calendar c1 =
  • 线程内存和主内存之间联系 qifeifei java thread
    1， java多线程共享主内存中变量的时候，一共会经过几个阶段，    lock:将主内存中的变量锁定，为一个线程所独占。   unclock:将lock加的锁定解除，此时其它的线程可以有机会访问此变量。   read:将主内存中的变量值读到工作内存当中。   load:将read读取的值保存到工作内存中的变量副本中。  
  • schedule和scheduleAtFixedRate tangqi609567707 javatimerschedule
    原文地址：http://blog.csdn.net/weidan1121/article/details/527307 import java.util.Timer;import java.util.TimerTask;import java.util.Date; /** * @author vincent */public class TimerTest {  
  • erlang 部署 wudixiaotie erlang
    1.如果在启动节点的时候报这个错 ： {"init terminating in do_boot",{'cannot load',elf_format,get_files}} 则需要在reltool.config中加入 {app, hipe, [{incl_cond, exclude}]},     2.当generate时，遇到： ERROR
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他