基于GLBP协议的医院网络规划与设计 文档+申请表+任务书+开题报告+中期检查+文献综述+PPT+周进展+网络拓扑及配置
目录
基于GLBP协议的医院网络规划与设计
摘要
Hospital network planning and design based on GLBP protocol
Abstract
1.基于GLBP协议的医院网络需求分析
1.1对用户需求进行分析
(1)网络应用需求分析
(2)对网络进行安全需求分析
（3） 对技术需求进行分析
1.2主要设计的目标
(1)开放性
(2)实用性
(3)可扩展性
(4)先进性
(5)可靠性
(6)安全性
(7)可管理性
2.医院网络整体设计
2.1医院网络整个架构
2.2技术的选择
2.2.1 接入层的技术选择方案
2.2.2 汇聚层的技术选择方案
2.2.3 核心层的技术选择方案
2.2.4网络安全技术选择方案
2.3设备的选型
2.3.1 思科SW2960介绍
2.3.2 思科SW3560介绍
2.3.3 思科的Router大概介绍
3.医院网络综合布线
3.1 信息点数量
3.2 设备间布局
3.3 耗材数量
4.医院网络的配置和实施
4.1 划分VLAN
4.2 配置trunk
4.3 配置RSTP
4.4 配置SVI
4.5 配置GLBP
4.6 配置OSPF协议
4.7配置OSPF下的发默认路由
4.8配置NAT
4.9配置出口备份默认路由技术
4.91配置服务器
5医院的网络测试与验收
5.1测试与验收网络效果参数
5.2测试阶段
5.2.1测试门诊楼访问医技大楼
5.2.2测试医院门诊楼访问急诊楼
5.2.3测试医院医技大楼访问化验大楼
5.2.4测试医院行政楼访问医技楼
5.2.5测试医院医技楼访问网络服务器
5.2.6测试医院门诊楼访问服务器
5.2.7测试医院住院楼访问服务器
5.2.8测试医院办公楼访问服务器
5.2.9测试医技楼访问公网
5.2.10测试急诊楼访问公网
5.2.11测试住院楼访问公网
5.2.12测试行政楼访问公网
5.3验收阶段
6.结论
7参考文献
8.致 谢
基于GLBP协议的医院网络规划与设计
摘要
随着经济的快速发展和医院网络规模不断发展，医院网络服务的人群有了很大的变化，业务范围不再只是一个地区或者某一种，其中大部分向着多地域不同的模式发展。传统的医院网络拥有数据交互延迟、安全访问级别不高、实时通信查等诸多问题，这些问题直接影响了医院未来的发展和运作。而伴随着科学技术的发展和应用的推广，特别是计算机技术和网络技术的发展，加之医院网络的应用需求的不断扩大，传统的网络结构和模式已不能满足现有的要求。
本论文以基于GLBP协议对现代化医院网络进行规划与设计，通过对整个医院网络的拓扑结构设计，IP地址进行规划、各交换机和路由器的配置、各部门间VLAN的划分、网关冗余和以太通道的配置、NAT私网地址与公网地址的转换、网络安全和帧中继的配置等搭建了网络系统的硬件平台。在搭建好的网络硬件平台基础上，通过对DNS、DHCP等服务的配置，以及域环境下对用户的控制管理，组策略的应用，网络打印机，软件发布，磁盘文件管理，安全策略的配置，WEB服务器、FTP服务器、MAIL服务器的配置等功能，实现了网络的整体规划和设计。
关键词：负载均衡，网关冗余，链路聚合，帧中继，双出口
Hospital network planning and design based on GLBP protocol
Abstract
With the rapid development of economy and the continuous development of the scale of hospital network, the population of hospital network service has changed a lot, and the business scope is no longer just a region or a certain kind, the medical service of the hospital network to serve the people is no longer limited to a certain region, nor to a certain kind, but to a multi-regional and diverse mode of development. Traditional hospital network has many problems, such as delay of data interaction, low level of security access, real-time communication check and so on.
These problems have a direct impact on the development and operation of the hospital. However, with the development and popularization of modern network technology, especially the development of modern computer technology and Internet technology, the application market demand of large-scale hospital network continues to expand. The traditional network structure and mode of the hospital can no longer meet the needs of the current business.
In this paper, the GLBP protocol is used to plan and design the modern hospital network. Through the topological structure design of the whole hospital network, the IP address is planned, the configuration of switches and routers, the division of VLAN between departments, the redundancy of gateway and the configuration of Ethernet channel, the conversion of NAT private network address and network address, the configuration of network security and frame relay, the hardware platform of the network system is built. On the basis of the network hardware platform, through the configuration of DNS, DHCP and other services, as well as the control and management of users in the domain environment, the application of group strategy, network printer, software release, disk file management, security policy configuration, WEB server, FTP server, MAIL server configuration and other functions, the overall planning and design of the network is realized.
Key word:：Load Balancing Gateway Redundant Link Aggregated Frame Relay Dual-Exit
本文转载自：http://www.biyezuopin.vip/onews.asp?id=14328