环境：
| 主机 | IP地址 | 组件 |
|---|---|---|
| ansible | 192.168.175.130 | ansible |
| master | 192.168.175.140 | docker，kubectl，kubeadm，kubelet |
| node | 192.168.175.141 | docker，kubectl，kubeadm，kubelet |
| node | 192.168.175.142 | docker，kubectl，kubeadm，kubelet |
检查及调试相关命令：
$ ansible-playbook -v k8s-time-sync.yaml --syntax-check $ ansible-playbook -v k8s-*.yaml -C $ ansible-playbook -v k8s-yum-cfg.yaml -C --start-at-task="Clean origin dir" --step $ ansible-playbook -v k8s-kernel-cfg.yaml --step
主机inventory文件：
/root/ansible/hosts
[k8s_cluster] master ansible_host=192.168.175.140 node1 ansible_host=192.168.175.141 node2 ansible_host=192.168.175.142 [k8s_cluster:vars] ansible_port=22 ansible_user=root ansible_password=hello123
检查网络：k8s-check.yaml检查k8s各主机的网络是否可达;
检查k8s各主机操作系统版本是否达到要求；
- name: step01_check
hosts: k8s_cluster
gather_facts: no
tasks:
- name: check network
shell:
cmd: "ping -c 3 -m 2 {{ansible_host}}"
delegate_to: localhost
- name: get system version
shell: cat /etc/system-release
register: system_release
- name: check system version
vars:
system_version: "{{ system_release.stdout | regex_search('([7-9].[0-9]+).*?') }}"
suitable_version: 7.5
debug:
msg: "{{ 'The version of the operating system is '+ system_version +', suitable!' if (system_version | float >= suitable_version) else 'The version of the operating system is unsuitable' }}"
调试命令：
$ ansible-playbook --ssh-extra-args '-o StrictHostKeyChecking=no' -v -C k8s-check.yaml $ ANSIBLE_HOST_KEY_CHECKING=False ansible-playbook -v -C k8s-check.yaml $ ANSIBLE_HOST_KEY_CHECKING=False ansible-playbook -v k8s-check.yaml --start-at-task="get system version"
- 连接配置：k8s-conn-cfg.yaml在
ansible服务器的/etc/hosts文件中添加k8s主机名解析配置 - 生成密钥对，配置
ansible免密登录到k8s各主机
- name: step02_conn_cfg
hosts: k8s_cluster
gather_facts: no
vars_prompt:
- name: RSA
prompt: Generate RSA or not(Yes/No)?
default: "no"
private: no
- name: password
prompt: input your login password?
default: "hello123"
tasks:
- name: Add DNS of k8s to ansible
delegate_to: localhost
lineinfile:
path: /etc/hosts
line: "{{ansible_host}} {{inventory_hostname}}"
backup: yes
- name: Generate RSA
run_once: true
shell:
cmd: ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ''
creates: /root/.ssh/id_rsa
when: RSA | bool
- name: Configure password free login
shell: |
/usr/bin/ssh-keyscan {{ ansible_host }} >> /root/.ssh/known_hosts 2> /dev/null
/usr/bin/ssh-keyscan {{ inventory_hostname }} >> /root/.ssh/known_hosts 2> /dev/null
/usr/bin/sshpass -p'{{ password }}' ssh-copy-id root@{{ ansible_host }}
#/usr/bin/sshpass -p'{{ password }}' ssh-copy-id root@{{ inventory_hostname }}
- name: Test ssh
shell: hostname
执行：
$ ansible-playbook k8s-conn-cfg.yaml Generate RSA or not(Yes/No)? [no]: yes input your login password? [hello123]: PLAY [step02_conn_cfg] ********************************************************************************************************** TASK [Add DNS of k8s to ansible] ************************************************************************************************ ok: [master -> localhost] ok: [node1 -> localhost] ok: [node2 -> localhost] TASK [Generate RSA] ************************************************************************************************************* changed: [master -> localhost] TASK [Configure password free login] ******************************************************************************************** changed: [node1 -> localhost] changed: [node2 -> localhost] TASK [Test ssh] ***************************************************************************************************************** changed: [master] changed: [node1] changed: [node2] PLAY RECAP ********************************************************************************************************************** master : ok=4 changed=3 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node1 : ok=3 changed=2 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node2 : ok=3 changed=2 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
配置k8s集群dns解析： k8s-hosts-cfg.yaml
设置主机名
/etc/hosts文件中互相添加dns解析
- name: step03_cfg_host
hosts: k8s_cluster
gather_facts: no
tasks:
- name: set hostname
hostname:
name: "{{ inventory_hostname }}"
use: systemd
- name: Add dns to each other
lineinfile:
path: /etc/hosts
backup: yes
line: "{{item.value.ansible_host}} {{item.key}}"
loop: "{{ hostvars | dict2items }}"
loop_control:
label: "{{ item.key }} {{ item.value.ansible_host }}"
执行：
$ ansible-playbook k8s-hosts-cfg.yaml PLAY [step03_cfg_host] ********************************************************************************************************** TASK [set hostname] ************************************************************************************************************* ok: [master] ok: [node1] ok: [node2] TASK [Add dns to each other] **************************************************************************************************** ok: [node2] => (item=node1 192.168.175.141) ok: [master] => (item=node1 192.168.175.141) ok: [node1] => (item=node1 192.168.175.141) ok: [node2] => (item=node2 192.168.175.142) ok: [master] => (item=node2 192.168.175.142) ok: [node1] => (item=node2 192.168.175.142) ok: [node2] => (item=master 192.168.175.140) ok: [master] => (item=master 192.168.175.140) ok: [node1] => (item=master 192.168.175.140) PLAY RECAP ********************************************************************************************************************** master : ok=2 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node1 : ok=2 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node2 : ok=2 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
配置yum源：k8s-yum-cfg.yaml
- name: step04_yum_cfg
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Create back-up directory
file:
path: /etc/yum.repos.d/org/
state: directory
- name: Back-up old Yum files
shell:
cmd: mv -f /etc/yum.repos.d/*.repo /etc/yum.repos.d/org/
removes: /etc/yum.repos.d/org/
- name: Add new Yum files
copy:
src: ./files_yum/
dest: /etc/yum.repos.d/
- name: Check yum.repos.d
cmd: ls /etc/yum.repos.d/*
时钟同步：k8s-time-sync.yaml
- name: step05_time_sync
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Start chronyd.service
systemd:
name: chronyd.service
state: started
enabled: yes
- name: Modify time zone & clock
shell: |
cp -f /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
clock -w
hwclock -w
- name: Check time now
command: date
禁用iptable、firewalld、NetworkManager服务
- name: step06_net_service
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Stop some services for net
systemd:
name: "{{ item }}"
state: stopped
enabled: no
loop:
- firewalld
- iptables
- NetworkManager
执行：
$ ansible-playbook -v k8s-net-service.yaml
... ...
failed: [master] (item=iptables) => {
"ansible_loop_var": "item",
"changed": false,
"item": "iptables"
}
MSG:
Could not find the requested service iptables: host
PLAY RECAP **********************************************************************************************************************
master : ok=0 changed=0 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0
node1 : ok=0 changed=0 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0
node2 : ok=0 changed=0 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0
禁用SElinux、swap：k8s-SE-swap-disable.yaml
- name: step07_net_service
hosts: k8s_cluster
gather_facts: no
tasks:
- name: SElinux disabled
lineinfile:
path: /etc/selinux/config
line: SELINUX=disabled
regexp: ^SELINUX=
state: present
backup: yes
- name: Swap disabled
path: /etc/fstab
line: '#\1'
regexp: '(^/dev/mapper/centos-swap.*$)'
backrefs: yes
修改内核：k8s-kernel-cfg.yaml
- name: step08_kernel_cfg
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Create /etc/sysctl.d/kubernetes.conf
copy:
content: ''
dest: /etc/sysctl.d/kubernetes.conf
force: yes
- name: Cfg bridge and ip_forward
lineinfile:
path: /etc/sysctl.d/kubernetes.conf
line: "{{ item }}"
state: present
loop:
- 'net.bridge.bridge-nf-call-ip6tables = 1'
- 'net.bridge.bridge-nf-call-iptables = 1'
- 'net.ipv4.ip_forward = 1'
- name: Load cfg
shell:
cmd: |
sysctl -p
modprobe br_netfilter
removes: /etc/sysctl.d/kubernetes.conf
- name: Check cfg
cmd: '[ $(lsmod | grep br_netfilter | wc -l) -ge 2 ] && exit 0 || exit 3'
执行：
$ ansible-playbook -v k8s-kernel-cfg.yaml --step
TASK [Check cfg] ****************************************************************************************************************
changed: [master] => {
"changed": true,
"cmd": "[ $(lsmod | grep br_netfilter | wc -l) -ge 2 ] && exit 0 || exit 3",
"delta": "0:00:00.011574",
"end": "2022-02-27 04:26:01.332896",
"rc": 0,
"start": "2022-02-27 04:26:01.321322"
}
changed: [node2] => {
"delta": "0:00:00.016331",
"end": "2022-02-27 04:26:01.351208",
"start": "2022-02-27 04:26:01.334877"
changed: [node1] => {
"delta": "0:00:00.016923",
"end": "2022-02-27 04:26:01.355983",
"start": "2022-02-27 04:26:01.339060"
PLAY RECAP **********************************************************************************************************************
master : ok=4 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
node1 : ok=4 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
node2 : ok=4 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
配置ipvs：k8s-ipvs-cfg.yaml
- name: step09_ipvs_cfg
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Install ipset and ipvsadm
yum:
name: "{{ item }}"
state: present
loop:
- ipset
- ipvsadm
- name: Load modules
shell: |
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
- name: Check cfg
shell:
cmd: '[ $(lsmod | grep -e -ip_vs -e nf_conntrack_ipv4 | wc -l) -ge 2 ] && exit 0 || exit 3'
安装docker：k8s-docker-install.yaml
- name: step10_docker_install
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Install docker-ce
yum:
name: docker-ce-18.06.3.ce-3.el7
state: present
- name: Cfg docker
copy:
src: ./files_docker/daemon.json
dest: /etc/docker/
- name: Start docker
systemd:
name: docker.service
state: started
enabled: yes
- name: Check docker version
shell:
cmd: docker --version
安装k8s组件[kubeadm\kubelet\kubectl]：k8s-install-kubepkgs.yaml
- name: step11_k8s_install_kubepkgs
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Install k8s components
yum:
name: "{{ item }}"
state: present
loop:
- kubeadm-1.17.4-0
- kubelet-1.17.4-0
- kubectl-1.17.4-0
- name: Cfg k8s
copy:
src: ./files_k8s/kubelet
dest: /etc/sysconfig/
force: no
backup: yes
- name: Start kubelet
systemd:
name: kubelet.service
state: started
enabled: yes
安装集群镜像：k8s-apps-images.yaml
- name: step12_apps_images
hosts: k8s_cluster
gather_facts: no
vars:
apps:
- kube-apiserver:v1.17.4
- kube-controller-manager:v1.17.4
- kube-scheduler:v1.17.4
- kube-proxy:v1.17.4
- pause:3.1
- etcd:3.4.3-0
- coredns:1.6.5
vars_prompt:
- name: cfg_python
prompt: Do you need to install docker pkg for python(Yes/No)?
default: "no"
private: no
tasks:
- block:
- name: Install python-pip
yum:
name: python-pip
state: present
- name: Install docker pkg for python
shell:
cmd: |
pip install docker==4.4.4
pip install websocket-client==0.32.0
creates: /usr/lib/python2.7/site-packages/docker/
when: cfg_python | bool
- name: Pull images
community.docker.docker_image:
name: "registry.cn-hangzhou.aliyuncs.com/google_containers/{{ item }}"
source: pull
loop: "{{ apps }}"
- name: Tag images
repository: "k8s.gcr.io/{{ item }}"
force_tag: yes
source: local
- name: Remove images for ali
state: absent
执行：
$ ansible-playbook k8s-apps-images.yaml Do you need to install docker pkg for python(Yes/No)? [no]: PLAY [step12_apps_images] ******************************************************************************************************* TASK [Install python-pip] ******************************************************************************************************* skipping: [node1] skipping: [master] skipping: [node2] TASK [Install docker pkg for python] ******************************************************************************************** TASK [Pull images] ************************************************************************************************************** changed: [node1] => (item=kube-apiserver:v1.17.4) changed: [node2] => (item=kube-apiserver:v1.17.4) changed: [master] => (item=kube-apiserver:v1.17.4) changed: [node1] => (item=kube-controller-manager:v1.17.4) changed: [master] => (item=kube-controller-manager:v1.17.4) changed: [node1] => (item=kube-scheduler:v1.17.4) changed: [master] => (item=kube-scheduler:v1.17.4) changed: [node1] => (item=kube-proxy:v1.17.4) changed: [node2] => (item=kube-controller-manager:v1.17.4) changed: [master] => (item=kube-proxy:v1.17.4) changed: [node1] => (item=pause:3.1) changed: [master] => (item=pause:3.1) changed: [node2] => (item=kube-scheduler:v1.17.4) changed: [node1] => (item=etcd:3.4.3-0) changed: [master] => (item=etcd:3.4.3-0) changed: [node2] => (item=kube-proxy:v1.17.4) changed: [node1] => (item=coredns:1.6.5) changed: [master] => (item=coredns:1.6.5) changed: [node2] => (item=pause:3.1) changed: [node2] => (item=etcd:3.4.3-0) changed: [node2] => (item=coredns:1.6.5) TASK [Tag images] *************************************************************************************************************** ok: [node1] => (item=kube-apiserver:v1.17.4) ok: [master] => (item=kube-apiserver:v1.17.4) ok: [node2] => (item=kube-apiserver:v1.17.4) ok: [node1] => (item=kube-controller-manager:v1.17.4) ok: [master] => (item=kube-controller-manager:v1.17.4) ok: [node2] => (item=kube-controller-manager:v1.17.4) ok: [master] => (item=kube-scheduler:v1.17.4) ok: [node1] => (item=kube-scheduler:v1.17.4) ok: [node2] => (item=kube-scheduler:v1.17.4) ok: [master] => (item=kube-proxy:v1.17.4) ok: [node1] => (item=kube-proxy:v1.17.4) ok: [node2] => (item=kube-proxy:v1.17.4) ok: [master] => (item=pause:3.1) ok: [node1] => (item=pause:3.1) ok: [node2] => (item=pause:3.1) ok: [master] => (item=etcd:3.4.3-0) ok: [node1] => (item=etcd:3.4.3-0) ok: [node2] => (item=etcd:3.4.3-0) ok: [master] => (item=coredns:1.6.5) ok: [node1] => (item=coredns:1.6.5) ok: [node2] => (item=coredns:1.6.5) TASK [Remove images for ali] **************************************************************************************************** PLAY RECAP ********************************************************************************************************************** master : ok=3 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 node1 : ok=3 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 node2 : ok=3 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0
k8s集群初始化：k8s-cluster-init.yaml
- name: step13_cluster_init
hosts: master
gather_facts: no
tasks:
- block:
- name: Kubeadm init
shell:
cmd:
kubeadm init
--apiserver-advertise-address={{ ansible_host }}
--kubernetes-version=v1.17.4
--service-cidr=10.96.0.0/12
--pod-network-cidr=10.244.0.0/16
--image-repository registry.aliyuncs.com/google_containers
- name: Create /root/.kube
file:
path: /root/.kube/
state: directory
owner: root
group: root
- name: Copy /root/.kube/config
copy:
src: /etc/kubernetes/admin.conf
dest: /root/.kube/config
remote_src: yes
backup: yes
- name: Copy kube-flannel
src: ./files_k8s/kube-flannel.yml
dest: /root/
- name: Apply kube-flannel
cmd: kubectl apply -f /root/kube-flannel.yml
- name: Get token
cmd: kubeadm token create --print-join-command
register: join_token
- name: debug join_token
debug:
var: join_token.stdout
到此这篇关于Ansible部署K8s集群的文章就介绍到这了,更多相关Ansible部署K8s集群内容请搜索脚本之家以前的文章或继续浏览下面的相关文章希望大家以后多多支持脚本之家！