OCC+ QT+VS、OCC+QtCreator 环境配置

OCC配置

OCC+ QT+VS 环境配置

1. 在VS中创建QtWidget项目
2. 将env.bat和msvc.bat拷贝到与项目名.sln同级目录下
3. 修改msvc.bat

@echo off

Setlocal EnableDelayedExpansion

rem Setup environment
rem 配置相应参数，%3默认是release 可手动修改为debug
call "%~dp0env.bat" vc141 win64 %3 

rem Define path to project file
rem 修改项目名称
set "PRJFILE=QtWidgetsApplication1.sln" 

rem Launch Visual Studio - either professional (devenv) or Express, as available
if exist "%DevEnvDir%\devenv.exe"  (
  start "" "%DevEnvDir%\devenv.exe" "%PRJFILE%"
) else if exist "%DevEnvDir%\%VisualStudioExpressName%.exe"  (
  start "" "%DevEnvDir%\%VisualStudioExpressName%.exe" "%PRJFILE%"
) else (
  echo Error: Could not find MS Visual Studio ^(%VCFMT%^)
  echo Check relevant environment variable ^(e.g. VS100COMNTOOLS for vc10^)
)

4. 修改env.bat

rem 定义变量，指向occ安装路径
SET "OCC_PATH=F:\OpenCASCADE-7.4.0-vc14-64\opencascade-7.4.0" 

rem 使用变量
call "%OCC_PATH%\env.bat" %1 %2 %3 

set "BIN_DIR=win%ARCH%\%VCVER%\bind"
set "LIB_DIR=win%ARCH%\%VCVER%\libd"

if ["%CASDEB%"] == [""] (
  set "BIN_DIR=win%ARCH%\%VCVER%\bin"
  set "LIB_DIR=win%ARCH%\%VCVER%\lib"
)

set "PATH=%~dp0%LIB_DIR%;%~dp0%BIN_DIR%;%PATH%"

这一步可能会失败，失败的话将echo %OCC_PATH%\env.bat 加到call下面，结尾用pause

确认是否成功：项目属性>c/c++>附加包含目录>宏 里面有大量以CSF为前缀的宏，这些宏其实对应的就是各种OCC的路径，之后直接引用宏即可，不必再去写路径

5. 添加属性表。设置属性表的属性
   • 附加包含目录：$(CSF_OCCTIncludePath)
   • 附加库目录：$(CSF_OCCTLibPath)
   • 附加依赖项：将路径opencascade-7.4.0\win64\vc14\lib下的lib文件全部加入

OCC+QT Create环境配置

1. 使用qt创建一个工程
2. QT Create也有类似于VS属性表的一个文件***.pri，创建一个该文件，并设置OCC路径，并引用下面的LIB库

#OCC路径设置
OCCPath = F:\OpenCASCADE-7.4.0-vc14-64\opencascade-7.4.0
OCCIncludePath = $$OCCPath/inc
win32:CONFIG(release,debug|release):OCCLibPath = $$OCCPath\win64\vc14\lib
else:CONFIG(debug,debug|release):OCCLibPath = $$OCCPath\win64\vc14\libd
INCLUDEPATH += $$OCCIncludePath

win32:LIBS+= -L$$OCCLibPath -lTKBin 
win32:LIBS+= -L$$OCCLibPath -lTKBinL 
win32:LIBS+= -L$$OCCLibPath -lTKBinTObj 
win32:LIBS+= -L$$OCCLibPath -lTKBinXCAF 
win32:LIBS+= -L$$OCCLibPath -lTKBO 
win32:LIBS+= -L$$OCCLibPath -lTKBool 
win32:LIBS+= -L$$OCCLibPath -lTKBRep 
win32:LIBS+= -L$$OCCLibPath -lTKCAF 
win32:LIBS+= -L$$OCCLibPath -lTKCDF 
win32:LIBS+= -L$$OCCLibPath -lTKD3DHost 
win32:LIBS+= -L$$OCCLibPath -lTKDCAF 
win32:LIBS+= -L$$OCCLibPath -lTKDFBrowser 
win32:LIBS+= -L$$OCCLibPath -lTKDraw 
win32:LIBS+= -L$$OCCLibPath -lTKernel 
win32:LIBS+= -L$$OCCLibPath -lTKFeat 
win32:LIBS+= -L$$OCCLibPath -lTKFillet 
win32:LIBS+= -L$$OCCLibPath -lTKG2d 
win32:LIBS+= -L$$OCCLibPath -lTKG3d 
win32:LIBS+= -L$$OCCLibPath -lTKGeomAlgo 
win32:LIBS+= -L$$OCCLibPath -lTKGeomBase 
win32:LIBS+= -L$$OCCLibPath -lTKHLR 
win32:LIBS+= -L$$OCCLibPath -lTKIGES 
win32:LIBS+= -L$$OCCLibPath -lTKIVtk 
win32:LIBS+= -L$$OCCLibPath -lTKIVtkDraw 
win32:LIBS+= -L$$OCCLibPath -lTKLCAF 
win32:LIBS+= -L$$OCCLibPath -lTKMath 
win32:LIBS+= -L$$OCCLibPath -lTKMesh 
win32:LIBS+= -L$$OCCLibPath -lTKMeshVS 
win32:LIBS+= -L$$OCCLibPath -lTKOffset 
win32:LIBS+= -L$$OCCLibPath -lTKOpenGl 
win32:LIBS+= -L$$OCCLibPath -lTKPrim 
win32:LIBS+= -L$$OCCLibPath -lTKQADraw 
win32:LIBS+= -L$$OCCLibPath -lTKRWMesh 
win32:LIBS+= -L$$OCCLibPath -lTKService 
win32:LIBS+= -L$$OCCLibPath -lTKShapeView 
win32:LIBS+= -L$$OCCLibPath -lTKShHealing 
win32:LIBS+= -L$$OCCLibPath -lTKStd 
win32:LIBS+= -L$$OCCLibPath -lTKStdL 
win32:LIBS+= -L$$OCCLibPath -lTKSTEP 
win32:LIBS+= -L$$OCCLibPath -lTKSTEP209 
win32:LIBS+= -L$$OCCLibPath -lTKSTEPAttr 
win32:LIBS+= -L$$OCCLibPath -lTKSTEPBase 
win32:LIBS+= -L$$OCCLibPath -lTKSTL 
win32:LIBS+= -L$$OCCLibPath -lTKTInspector 
win32:LIBS+= -L$$OCCLibPath -lTKTInspectorAPI 
win32:LIBS+= -L$$OCCLibPath -lTKTObj 
win32:LIBS+= -L$$OCCLibPath -lTKTObjDRAW 
win32:LIBS+= -L$$OCCLibPath -lTKToolsDraw 
win32:LIBS+= -L$$OCCLibPath -lTKTopAlgo 
win32:LIBS+= -L$$OCCLibPath -lTKTopTest 
win32:LIBS+= -L$$OCCLibPath -lTKTreeModel 
win32:LIBS+= -L$$OCCLibPath -lTKV3d 
win32:LIBS+= -L$$OCCLibPath -lTKVCAF 
win32:LIBS+= -L$$OCCLibPath -lTKView 
win32:LIBS+= -L$$OCCLibPath -lTKViewerTest 
win32:LIBS+= -L$$OCCLibPath -lTKVInspector 
win32:LIBS+= -L$$OCCLibPath -lTKVRML 
win32:LIBS+= -L$$OCCLibPath -lTKXCAF 
win32:LIBS+= -L$$OCCLibPath -lTKXDEDRAW 
win32:LIBS+= -L$$OCCLibPath -lTKXDEIGES 
win32:LIBS+= -L$$OCCLibPath -lTKXDESTEP 
win32:LIBS+= -L$$OCCLibPath -lTKXMesh 
win32:LIBS+= -L$$OCCLibPath -lTKXml 
win32:LIBS+= -L$$OCCLibPath -lTKXmlL 
win32:LIBS+= -L$$OCCLibPath -lTKXmlTObj 
win32:LIBS+= -L$$OCCLibPath -lTKXmlXCAF 
win32:LIBS+= -L$$OCCLibPath -lTKXSBase 
win32:LIBS+= -L$$OCCLibPath -lTKXSDRAW 

3. 在*.pro文件中增加RESOURCES += *.pri
4. 将env.bat拷贝到与项目名.sln同级目录下，env.bat设置与上一章节VS+Qt设置相同
5. 新建qt.bat

@echo off

Setlocal EnableDelayedExpansion

rem Setup environment
rem 配置相应参数，%3默认是release 可手动修改为debug
call "%~dp0env.bat" vc141 win64 %3 

rem 修改项目名称
call "%~dp0ProjectName.pro"