15.镜像安全-镜像加密

15.镜像安全-镜像加密_第1张图片

Overview

容器安全可以归纳分类如下:

  • 1、容器(+镜像)是否有病毒——代表项目:clair, IBM Vulnerability Advisor
  • 2、容器(+镜像)是否被篡改——代表项目:Notary
  • 3、容器是否隔离(container runtime security)——代表项目:runc
  • 4、容器(+镜像)是否保密,也即镜像是否被目标用户运行——代表项目:containerd, cri-o

本文主要讨论第四点——镜像保密性。社区目前对于镜像保密性的工作主要由IBM公司的Brandon Lum和Harshal Patil主导进行。由于镜像加密特性会改动OCI标准中的镜像格式部分:the Image Specification image-spec,因此在详细介绍镜像加密原理之前有必要先了解一下OCI

OCI

OCI(Open Container Initiative)由 Docker,CoreOS以及容器行业中的其他领导者在2015年6月启动,致力于围绕容器格式和运行时创建开放的行业标准,主要包含两部分:

  • 1、the Runtime Specification (runtime-spec)——负责容器运行时,contains technologies such as namespaces, cgroups, Linux capabilities, as well as SELinux, AppArmor, and Seccomp profiles
  • 2、the Image Specification (image-spec)——负责容器镜像标准,主要规范镜像存储格式

社区对于OCI规范的实现情况如下:

  • OCI Runtime Spec Implementations: runc(Runtime (Container)), hyperhq/runv(Runtime (Virtual Machine))
  • OCI Image Spec Implementations:Buildah(构建OCI镜像),Skopeo(传输OCI镜像, based on containers/image)

支持OCI Runtime Spec&Image Spec的项目如下:

  • containerd:在runc基础上实现了OCI Image Spec部分
  • cri-o:在runc基础上实现了OCI Image Spec部分(base on containers/image, containers/storage and CNI)
  • Podman:在Buildah基础上实现了OCI Image&Runtime Spec(Buildah and Podman relationship)
  • docker:在containerd基础上包装了docker的API,并计划将底层相关代码都迁移到containerd(moby/moby#38043)
  • rkt(pronounced like a “rocket”)

为此containerdcri-odocker以及rkt也被广义地称为container runtime(High-Level Container Runtimes),如图:

15.镜像安全-镜像加密_第2张图片

详情见An Introduction to Container Runtimes

Encrypted Container Image Principle

由于镜像加密是在OCI镜像格式上的扩展,我们先介绍现存镜像格式,如下:

{
  "schemaVersion": 2,
  "config": {
    "mediaType": "application/vnd.oci.image.config.v1+json",
    "size": 7023,
    "digest": "sha256:b5b2b2c507a0944348e0303114d8d93aaaa081732b86451d9bce1f432a537bc7"
  },
  "layers": [
    {
      "mediaType": "application/vnd.oci.image.layer.v1.tar+gzip",
      "size": 32654,
      "digest": "sha256:9834876dcfb05cb167a5c24953eba58c4ac89b1adf57f28f2f9d09af107ee8f0"
    },
    {
      "mediaType": "application/vnd.oci.image.layer.v1.tar+gzip",
      "size": 16724,
      "digest": "sha256:3c3a4604a545cdc127456d94e421cd355bca5b528f4a9c1905b15da2eb4a4c6b"
    },
    {
      "mediaType": "application/vnd.oci.image.layer.v1.tar+gzip",
      "size": 73109,
      "digest": "sha256:ec4b8955958665577945c89419d1af06b5f7636b4ac3da7f12184802ad867736"
    }
  ],
  "annotations": {
    "com.example.key1": "value1",
    "com.example.key2": "value2"
  }
}

Unlike the image index, which contains information about a set of images that can span a variety of architectures and operating systems, an image manifest provides a configuration and set of layers for a single container image for a specific architecture and operating system.

对该格式说明如下(refers to Image Manifest Property Descriptions):

  • schemaVersion:This REQUIRED property specifies the image manifest schema version
  • config(belongs to descriptor):包含镜像的元文件(配置文件)信息
    • mediaType:标识config文件格式(media type of the referenced content),目前必须实现的格式为application/vnd.oci.image.config.v1+json
    • digest:config文件内容的sha256 hash
    • size:config文件内容大小(in bytes)
  • layers:包含镜像各分层相关信息,内容是由镜像分层(belongs to descriptor)组成的数组
    • mediaType:标识镜像layer文件格式(media type of the referenced content),目前必须实现的格式列表如下:
      • application/vnd.oci.image.layer.v1.tar
      • application/vnd.oci.image.layer.v1.tar+gzip
      • application/vnd.oci.image.layer.nondistributable.v1.tar
      • application/vnd.oci.image.layer.nondistributable.v1.tar+gzip
    • digest: layer文件内容的sha256 hash
    • size:layer文件内容大小(in bytes)
  • annotations(string-string map):This OPTIONAL property contains arbitrary metadata for the image manifest.

而基于Proposal: New Mediatype - Container Image Encryption的讨论,镜像加密原理图(draft of modifications to the OCI spec on Encrypted Container Images)如下:

Encrypted container images are based on the OCI image spec. The changes to the spec is the adding of the encrypted layer mediatype. An image manifest contains some metadata and a list of layers. We introduce a new layer mediatype suffix +encrypted to represent an encrypted layer. For example, a regular layer with mediatype ‘application/vnd.oci.image.layer.v1.tar’ when encrypted would be ‘application/vnd.oci.image.layer.v1.tar+encrypted’. Because there is some metadata involved with the encryption, an encrypted layer will also contain several annotations with the prefix org.opencontainers.image.enc.

也即在原来格式的基础上添加了一个mediaType类型,表示数据文件被加密;同时在annotation中添加具体加密相关信息

例如,没加密之前数据如下:

"layers":[
  {
    "mediaType":"application/vnd.oci.image.layer.v1.tar+gzip",
    "digest":"sha256:7c9d20b9b6cda1c58bc4f9d6c401386786f584437abbe87e58910f8a9a15386b",
    "size":760770
  }
]

加密之后数据如下:

"layers":[
  {
    "mediaType":"application/vnd.oci.image.layer.v1.tar+gzip+encrypted",
    "digest":"sha256:c72c69b36a886c268e0d7382a7c6d885271b6f0030ff022fda2b6346b2b274ba",
    "size":760770,
    "annotations": {
      "org.opencontainers.image.enc.keys.jwe":"eyJwcm90ZWN0Z...",
      "org.opencontainers.image.enc.pubopts":"eyJjaXBoZXIiOi..."
    }
  }
]

另外,通过将加密粒度细化到镜像层,保留了原有镜像格式的layering and deduplication特性

整个加密体系使用混合加密方案:

  • 1、使用对称加密算法(i.e. AES)加密镜像分层数据——主要为了提高加密解密速度
  • 2、使用非对称加密算法(eg: OpenPGP, JSON Web Encryption (JWE), and PKCS#7)首先用公钥加密上述对称加密的密钥,然后用私钥对加密后的密钥进行解密——主要为了提高密钥管理的灵活性

流程图如下:

15.镜像安全-镜像加密_第3张图片

 

大致可以归纳为如下步骤:

  • 1、产生对称加密密钥(i.e. LEK),用于加密镜像分层
  • 2、利用非对称加密公钥加密LEK,产生Wrapped Key
  • 3、将加密后的镜像(包含Wrapped Key)上传到公开仓库,例如:Docker Hub or quay.io
  • 4、非对称加密私钥持有者下载该镜像,并用该私钥对该镜像进行解密并运行

Encrypted Container Image Build ToolChain——containerd imgcrypt

对于镜像加密工具,社区计划支持:docker CLI(To integrate into docker CLI, we are currently waiting on moby/moby#38043. Tracking with moby/buildkit#714), containerd imgcrypt, skopeo以及buildah,目前已经实现的有containerd imgcryptskopeo

下面我们基于containerd imgcrypt对上述加密流程进行实操:

# Step1: Install containerd imgcrypt
$ git clone https://github.com/containerd/imgcrypt.git github.com/containerd/imgcrypt
$ cd github.com/containerd/imgcrypt && make && make install
install

# Step2: Setting up containerd
$ wget https://github.com/containerd/containerd/releases/download/v1.3.0/containerd-1.3.0.linux-amd64.tar.gz
$ tar -xzf containerd-1.3.0.linux-amd64.tar.gz
$ ls bin/
containerd  containerd-shim  containerd-shim-runc-v1  containerd-shim-runc-v2  containerd-stress  ctr
$ cat < config.toml
disable_plugins = ["cri"]
root = "/tmp/var/lib/containerd"
state = "/tmp/run/containerd"
[grpc]
  address = "/tmp/run/containerd/mycontainerd.sock"
  uid = 0
  gid = 0
[stream_processors]
    [stream_processors."io.containerd.ocicrypt.decoder.v1.tar.gzip"]
        accepts = ["application/vnd.oci.image.layer.v1.tar+gzip+encrypted"]
        returns = "application/vnd.oci.image.layer.v1.tar+gzip"
        path = "/usr/local/bin/ctd-decoder"
    [stream_processors."io.containerd.ocicrypt.decoder.v1.tar"]
        accepts = ["application/vnd.oci.image.layer.v1.tar+encrypted"]
        returns = "application/vnd.oci.image.layer.v1.tar"
        path = "/usr/local/bin/ctd-decoder"
EOF
$ bin/containerd -c config.toml
[... truncated ...]
INFO[2020-02-26T11:16:07.704084989+08:00] containerd successfully booted in 0.047800s

# Step3: Generate some RSA keys with openssl
$ openssl genrsa -out mykey.pem
Generating RSA private key, 2048 bit long modulus
.......................................................................................................+++
.............................+++
e is 65537 (0x10001)
$ openssl rsa -in mykey.pem -pubout -out mypubkey.pem
writing RSA key

# Step4: Pulling an image
$ chmod 0666 /tmp/run/containerd/containerd.sock
$ CTR="/usr/local/bin/ctr-enc -a /tmp/run/containerd/containerd.sock"
$ $CTR images pull --all-platforms docker.io/library/bash:latest
[... truncated ...]
elapsed: 8.7 s                                                                    total:  39.2 M (4.5 MiB/s)                                       
unpacking linux/amd64 sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f...
unpacking linux/arm/v6 sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f...
unpacking linux/arm/v7 sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f...
unpacking linux/arm64/v8 sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f...
unpacking linux/386 sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f...
unpacking linux/ppc64le sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f...
unpacking linux/s390x sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f...
done
$ $CTR images list   
REF                           TYPE                                                      DIGEST                                                                  SIZE    PLATFORMS                                                                                LABELS 
docker.io/library/bash:latest application/vnd.docker.distribution.manifest.list.v2+json sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -   
$ $CTR images layerinfo --platform linux/amd64 docker.io/library/bash:latest
   #                                                                    DIGEST      PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:c9b1b535fdd91a9855fb7f82348177e5f019329a58c53c47272962dd60f71fc9   linux/amd64   2802957                          
   1   sha256:a3698fd3137d820dbb91b5f96e89af64b196dde4ab4c326dd1bd6291bbd771cf   linux/amd64   3186680                          
   2   sha256:2538f4b330c99e67e96803569826ba62f7a3353d27f2a15bcf1e33d1814fa7ad   linux/amd64       340

# Step5: Encrypting the image
$ $CTR images encrypt --recipient jwe:mypubkey.pem --platform linux/amd64 docker.io/library/bash:latest bash.enc:latest
Encrypting docker.io/library/bash:latest to bash.enc:latest
# The arguments are:
# --recipient jwe:mypubkey.pem: This indicates that we want to encrypt the image using the public key mypubkey.pem that we just generated, and the prefix jwe: indicates that we want to use the encryption scheme JSON web encryption scheme for our encryption metadata.
# --platform linux/amd64: Encrypt only the linux/amd64 image
# docker.io/library/bash:latest - The image to encrypt
# bash.enc:latest - The tag of the encrypted image to be created
# Optional: it is possible to encrypt just certain layers of the image by using the --layer flag
$ $CTR images list
REF                           TYPE                                                      DIGEST                                                                  SIZE    PLATFORMS                                                                                LABELS 
bash.enc:latest               application/vnd.oci.image.index.v1+json                   sha256:e1cea4c43a0d43bf3fdd6af66509668f6fe16e433085fcc7cf5b8a4ec48c80aa 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
docker.io/library/bash:latest application/vnd.docker.distribution.manifest.list.v2+json sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -   
# We can observe the layerinfo to show the encryption
$ $CTR images layerinfo --platform linux/amd64 bash.enc:latest
   #                                                                    DIGEST      PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:375abe9071e498e57f1cfcf349266948c3760bfb136e051c22a532d38a020e74   linux/amd64   2802957          jwe        [jwe]
   1   sha256:3298803dec193fdd561ea27d0b1469e3f0b5b796962f543f3bcc57cd12ebdf5d   linux/amd64   3186680          jwe        [jwe]
   2   sha256:bdbc04a60398d706a06e5ae88a4cdbfef770c9fe1b12e31fcf5a50532dafad87   linux/amd64       340          jwe        [jwe]
# Strange enough, the layers 'SIZE' of 'bash.enc:latest' is same with the one of 'docker.io/library/bash:latest'
$ $CTR images layerinfo --platform linux/amd64 docker.io/library/bash:latest
   #                                                                    DIGEST      PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:c9b1b535fdd91a9855fb7f82348177e5f019329a58c53c47272962dd60f71fc9   linux/amd64   2802957                          
   1   sha256:a3698fd3137d820dbb91b5f96e89af64b196dde4ab4c326dd1bd6291bbd771cf   linux/amd64   3186680                          
   2   sha256:2538f4b330c99e67e96803569826ba62f7a3353d27f2a15bcf1e33d1814fa7ad   linux/amd64       340

# Compare other platforms
$ $CTR images layerinfo --platform linux/arm64/v8 bash.enc:latest
   #                                                                    DIGEST         PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:8fa90b21c985a6fcfff966bdfbde81cdd088de0aa8af38110057f6ac408f4408   linux/arm64/v8   2723075                          
   1   sha256:4d89eb6b628bc985ffcdcb939bf05a16194be6aed18c2848e1424d01ca0012fd   linux/arm64/v8   3193678                          
   2   sha256:4818fb358d8f64c071010cb05fe59285888a36edbe1a45a5eed80576b08d312c   linux/arm64/v8       344                          
$ $CTR images layerinfo --platform linux/arm64/v8 docker.io/library/bash:latest
   #                                                                    DIGEST         PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:8fa90b21c985a6fcfff966bdfbde81cdd088de0aa8af38110057f6ac408f4408   linux/arm64/v8   2723075                          
   1   sha256:4d89eb6b628bc985ffcdcb939bf05a16194be6aed18c2848e1424d01ca0012fd   linux/arm64/v8   3193678                          
   2   sha256:4818fb358d8f64c071010cb05fe59285888a36edbe1a45a5eed80576b08d312c   linux/arm64/v8       344                          

# Step6: Pushing to registry
# Let us set up a local registry that we can push the encrypted image to. Note that by default, the docker/distribution registry version 2.7.1 and above supports encrypted OCI images out of the box.
$ docker run -d -p 5000:5000 --restart=always --name registry registry:2.7.1
Unable to find image 'registry:2.7.1' locally
2.7.1: Pulling from library/registry
486039affc0a: Pull complete 
ba51a3b098e6: Pull complete 
8bb4c43d6c8e: Pull complete 
6f5f453e5f2d: Pull complete 
42bc10b72f42: Pull complete 
Digest: sha256:7d081088e4bfd632a88e3f3bcd9e007ef44a796fddfe3261407a3f9f04abe1e7
Status: Downloaded newer image for registry:2.7.1
f65eff4accdc64eca42b5aa2c2c36e831c63172472800c835e031ec758a3ccbe
$ docker ps |grep registry
f65eff4accdc        registry:2.7.1                                 "/entrypoint.sh /etc…"   28 seconds ago      Up 27 seconds       0.0.0.0:5000->5000/tcp   registry
$ $CTR images tag bash.enc:latest localhost:5000/bash.enc:latest
localhost:5000/bash.enc:latest
$ $CTR images list
REF                            TYPE                                                      DIGEST                                                                  SIZE    PLATFORMS                                                                                LABELS 
bash.enc:latest                application/vnd.oci.image.index.v1+json                   sha256:e1cea4c43a0d43bf3fdd6af66509668f6fe16e433085fcc7cf5b8a4ec48c80aa 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
docker.io/library/bash:latest  application/vnd.docker.distribution.manifest.list.v2+json sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
localhost:5000/bash.enc:latest application/vnd.oci.image.index.v1+json                   sha256:e1cea4c43a0d43bf3fdd6af66509668f6fe16e433085fcc7cf5b8a4ec48c80aa 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
$ $CTR images push localhost:5000/bash.enc:latest
[... truncated ...]
elapsed: 0.4 s                                                                    total:  39.2 M (97.7 MiB/s)
$ $CTR images rm localhost:5000/bash.enc:latest bash.enc:latest
localhost:5000/bash.enc:latest
bash.enc:latest
$ $CTR images pull localhost:5000/bash.enc:latest
localhost:5000/bash.enc:latest:                                                   resolved       |++++++++++++++++++++++++++++++++++++++| 
index-sha256:e1cea4c43a0d43bf3fdd6af66509668f6fe16e433085fcc7cf5b8a4ec48c80aa:    done           |++++++++++++++++++++++++++++++++++++++| 
manifest-sha256:043e2439dae1a9634be8b3a589c8a2e6048f0f1c0ca9d1516c53cd1ee8a8bdf8: done           |++++++++++++++++++++++++++++++++++++++| 
layer-sha256:bdbc04a60398d706a06e5ae88a4cdbfef770c9fe1b12e31fcf5a50532dafad87:    done           |++++++++++++++++++++++++++++++++++++++| 
layer-sha256:375abe9071e498e57f1cfcf349266948c3760bfb136e051c22a532d38a020e74:    done           |++++++++++++++++++++++++++++++++++++++| 
layer-sha256:3298803dec193fdd561ea27d0b1469e3f0b5b796962f543f3bcc57cd12ebdf5d:    done           |++++++++++++++++++++++++++++++++++++++| 
config-sha256:e155078e7721d0d550b869592482f0e2c9b9c40e6a541fb430ab46a278fde5cd:   exists         |++++++++++++++++++++++++++++++++++++++| 
elapsed: 0.2 s                                                                    total:  3.0 Mi (15.1 MiB/s)                                      
unpacking linux/amd64 sha256:e1cea4c43a0d43bf3fdd6af66509668f6fe16e433085fcc7cf5b8a4ec48c80aa...
done
$ $CTR images list
REF                            TYPE                                                      DIGEST                                                                  SIZE    PLATFORMS                                                                                LABELS 
docker.io/library/bash:latest  application/vnd.docker.distribution.manifest.list.v2+json sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
localhost:5000/bash.enc:latest application/vnd.oci.image.index.v1+json                   sha256:e1cea4c43a0d43bf3fdd6af66509668f6fe16e433085fcc7cf5b8a4ec48c80aa 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -     

# Step7: Decrypting the image
$ $CTR images decrypt --key mykey.pem --platform linux/amd64 localhost:5000/bash.enc:latest localhost:5000/bash.dec:latest
Decrypting localhost:5000/bash.enc:latest to localhost:5000/bash.dec:latest
$ $CTR images list
REF                            TYPE                                                      DIGEST                                                                  SIZE    PLATFORMS                                                                                LABELS 
docker.io/library/bash:latest  application/vnd.docker.distribution.manifest.list.v2+json sha256:8193ca23afc8e1069bd3d982733df79c68dbcfcd66b4da6b5d65da85987dae2f 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
localhost:5000/bash.dec:latest application/vnd.oci.image.index.v1+json                   sha256:52dbac1ba1464568b2de8c9bc0d1b08d26786365e415c2c3ccb52a23191afc22 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
localhost:5000/bash.enc:latest application/vnd.oci.image.index.v1+json                   sha256:e1cea4c43a0d43bf3fdd6af66509668f6fe16e433085fcc7cf5b8a4ec48c80aa 5.7 MiB linux/386,linux/amd64,linux/arm/v6,linux/arm/v7,linux/arm64/v8,linux/ppc64le,linux/s390x -      
# Notice that the 'DIGEST' of 'localhost:5000/bash.dec:latest' is different with the one of 'docker.io/library/bash:latest' 
# Let's have a look at layerinfos of these images
$ $CTR images layerinfo --platform linux/amd64 docker.io/library/bash:latest
   #                                                                    DIGEST      PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:c9b1b535fdd91a9855fb7f82348177e5f019329a58c53c47272962dd60f71fc9   linux/amd64   2802957                          
   1   sha256:a3698fd3137d820dbb91b5f96e89af64b196dde4ab4c326dd1bd6291bbd771cf   linux/amd64   3186680                          
   2   sha256:2538f4b330c99e67e96803569826ba62f7a3353d27f2a15bcf1e33d1814fa7ad   linux/amd64       340
$ $CTR images layerinfo --platform linux/amd64 localhost:5000/bash.enc:latest
   #                                                                    DIGEST      PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:375abe9071e498e57f1cfcf349266948c3760bfb136e051c22a532d38a020e74   linux/amd64   2802957          jwe        [jwe]
   1   sha256:3298803dec193fdd561ea27d0b1469e3f0b5b796962f543f3bcc57cd12ebdf5d   linux/amd64   3186680          jwe        [jwe]
   2   sha256:bdbc04a60398d706a06e5ae88a4cdbfef770c9fe1b12e31fcf5a50532dafad87   linux/amd64       340          jwe        [jwe]
$ $CTR images layerinfo --platform linux/amd64 localhost:5000/bash.dec:latest
   #                                                                    DIGEST      PLATFORM      SIZE   ENCRYPTION   RECIPIENTS
   0   sha256:c9b1b535fdd91a9855fb7f82348177e5f019329a58c53c47272962dd60f71fc9   linux/amd64   2802957                          
   1   sha256:a3698fd3137d820dbb91b5f96e89af64b196dde4ab4c326dd1bd6291bbd771cf   linux/amd64   3186680                          
   2   sha256:2538f4b330c99e67e96803569826ba62f7a3353d27f2a15bcf1e33d1814fa7ad   linux/amd64       340                          
# layers of 'localhost:5000/bash.dec:latest' is same with 'docker.io/library/bash:latest' but the image 'DIGEST' differs 

# Step8: Running a container
# We can now attempt to run the encrypted container image
$ $CTR run --rm localhost:5000/bash.enc:latest test echo 'Hello World!'
ctr: you are not authorized to use this image: missing private key needed for decryption
# We notice that running the image failed. This is because we did not provide the keys for the encrypted image.We can pass the keys in with the --key flag.
$ $CTR run --rm --key mykey.pem localhost:5000/bash.enc:latest test echo 'Hello World!'
Hello World!

Kubernetes Image Encryption Support

目前社区计划对Kubernetes支持两种镜像加密模式:

  • Node Key Model:将密钥放在Kubernetes工作节点上,以节点为解密粒度(已实现)
  • Multitenant Key Model:多租户模型,支持解密粒度为集群和用户(还未实现,based on this KEP)

本文主要探讨第一种模型,如图所示:

15.镜像安全-镜像加密_第4张图片

 

原理很清晰:

  • 1、产生加密公钥和私钥,将密钥放在Kubernetes集群Worker节点指定路径下
  • 2、用公钥加密镜像并上传到镜像仓库
  • 3、用加密镜像在Kubernetes集群创建服务
  • 4、Worker节点Kubelet会调用container runtime拉取加密镜像,利用私钥对该镜像进行解密,最终成功运行解密后的镜像

在了解大致流程后,我们进一步探讨一下Worker节点上container runtime对镜像加密的支持情况

首先,Kubernetes使用CRI来对接container runtime,如图:15.镜像安全-镜像加密_第5张图片

 

而对于镜像加密特性,社区计划对container-runtime支持:containerd(+CRI-Containerd)以及cri-o,目前已经实现的有containerd(CRI-Containerd目前正在合并PR)以及cri-o。因此这里我们主要讨论containerd以及cri-o等计划支持镜像加密特性的container runtime实现

这里给出cri结合cri-ocontainerd以及docker的使用图示:15.镜像安全-镜像加密_第6张图片

通过上述图示,我们可以更加直观地看出Kubernetes对以上container runtime在使用上的细节

Kubernetes Image Encryption Support-CRIO

本章给出Kubernetes结合CRIO基于Node Key Model镜像加密模式的使用示例:

# Step1: Install cri-o from source code
# Install Runtime dependencies
$ yum install -y \
  containers-common \
  device-mapper-devel \
  git \
  glib2-devel \
  glibc-devel \
  glibc-static \
  go \
  gpgme-devel \
  libassuan-devel \
  libgpg-error-devel \
  libseccomp-devel \
  libselinux-devel \
  pkgconfig \
  make \
  runc

# Compile cri-o from source code
$ git clone https://github.com/cri-o/cri-o go/src/github.com/cri-o/cri-o
$ cd go/src/github.com/cri-o/cri-o && make
mkdir -p "/root/go/src/github.com/cri-o/cri-o/_output/src/github.com/cri-o"
ln -s "/root/go/src/github.com/cri-o/cri-o" "/root/go/src/github.com/cri-o/cri-o/_output/src/github.com/cri-o/cri-o"
touch "/root/go/src/github.com/cri-o/cri-o/_output/.gopathok"
GO111MODULE=on go build --mod=vendor -ldflags '-s -w -X main.gitCommit="186c23056ac25396e9ea9e49c5e5bfbe271b7751" -X main.buildInfo=1582724503' -tags "containers_image_ostree_stub  exclude_graphdriver_btrfs btrfs_noversion    seccomp selinux" -o bin/crio github.com/cri-o/cri-o/cmd/crio
GO111MODULE=on go build --mod=vendor -ldflags '-s -w -X main.gitCommit="186c23056ac25396e9ea9e49c5e5bfbe271b7751" -X main.buildInfo=1582724526' -tags "containers_image_ostree_stub  exclude_graphdriver_btrfs btrfs_noversion    seccomp selinux" -o bin/crio-status github.com/cri-o/cri-o/cmd/crio-status
make -C pinns
make[1]: Entering directory `/root/go/src/github.com/cri-o/cri-o/pinns'
cc -std=c99 -Os -Wall -Wextra -static   -c -o pinns.o pinns.c
cc -o ../bin/pinns pinns.o -std=c99 -Os -Wall -Wextra -static 
make[1]: Leaving directory `/root/go/src/github.com/cri-o/cri-o/pinns'
./bin/crio --config=""  config  > crio.conf
(/root/go/src/github.com/cri-o/cri-o/build/bin/go-md2man -in docs/crio-status.8.md -out docs/crio-status.8.tmp && touch docs/crio-status.8.tmp && mv docs/crio-status.8.tmp docs/crio-status.8) || \
        (/root/go/src/github.com/cri-o/cri-o/build/bin/go-md2man -in docs/crio-status.8.md -out docs/crio-status.8.tmp && touch docs/crio-status.8.tmp && mv docs/crio-status.8.tmp docs/crio-status.8)
(/root/go/src/github.com/cri-o/cri-o/build/bin/go-md2man -in docs/crio.conf.5.md -out docs/crio.conf.5.tmp && touch docs/crio.conf.5.tmp && mv docs/crio.conf.5.tmp docs/crio.conf.5) || \
        (/root/go/src/github.com/cri-o/cri-o/build/bin/go-md2man -in docs/crio.conf.5.md -out docs/crio.conf.5.tmp && touch docs/crio.conf.5.tmp && mv docs/crio.conf.5.tmp docs/crio.conf.5)
(/root/go/src/github.com/cri-o/cri-o/build/bin/go-md2man -in docs/crio.8.md -out docs/crio.8.tmp && touch docs/crio.8.tmp && mv docs/crio.8.tmp docs/crio.8) || \
        (/root/go/src/github.com/cri-o/cri-o/build/bin/go-md2man -in docs/crio.8.md -out docs/crio.8.tmp && touch docs/crio.8.tmp && mv docs/crio.8.tmp docs/crio.8)
$ make install  
install  -D -m 755 bin/crio /usr/local/bin/crio
install  -D -m 755 bin/crio-status /usr/local/bin/crio-status
install  -D -m 755 bin/pinns /usr/local/bin/pinns
install  -d -m 755 /usr/local/share/man/man5
install  -d -m 755 /usr/local/share/man/man8
install  -m 644 docs/crio.conf.5 -t /usr/local/share/man/man5
install  -m 644 docs/crio-status.8 docs/crio.8 -t /usr/local/share/man/man8
install  -d -m 755 /usr/local/share/bash-completion/completions
install  -d -m 755 /usr/local/share/fish/completions
install  -d -m 755 /usr/local/share/zsh/site-functions
install  -D -m 644 -t /usr/local/share/bash-completion/completions completions/bash/crio
install  -D -m 644 -t /usr/local/share/fish/completions completions/fish/crio.fish
install  -D -m 644 -t /usr/local/share/zsh/site-functions  completions/zsh/_crio
install  -D -m 644 -t /usr/local/share/bash-completion/completions completions/bash/crio-status
install  -D -m 644 -t /usr/local/share/fish/completions completions/fish/crio-status.fish
install  -D -m 644 -t /usr/local/share/zsh/site-functions  completions/zsh/_crio-status

# Download conmon
$ git clone https://github.com/containers/conmon ~/go/src/github.com/containers/conmon
$ cd ~/go/src/github.com/containers/conmon
$ make  
mkdir -p bin
cc -std=c99 -Os -Wall -Wextra -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include   -DVERSION=\"2.0.11-dev\" -DGIT_COMMIT=\""86aa80b908d7532ab9b6edd6f4f27ba4bf6ba17b"\"   -D USE_JOURNALD=0 -o src/conmon.o -c src/conmon.c
cc -std=c99 -Os -Wall -Wextra -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include   -DVERSION=\"2.0.11-dev\" -DGIT_COMMIT=\""86aa80b908d7532ab9b6edd6f4f27ba4bf6ba17b"\"   -D USE_JOURNALD=0 -o src/cmsg.o -c src/cmsg.c
cc -std=c99 -Os -Wall -Wextra -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include   -DVERSION=\"2.0.11-dev\" -DGIT_COMMIT=\""86aa80b908d7532ab9b6edd6f4f27ba4bf6ba17b"\"   -D USE_JOURNALD=0 -o src/ctr_logging.o -c src/ctr_logging.c
cc -std=c99 -Os -Wall -Wextra -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include   -DVERSION=\"2.0.11-dev\" -DGIT_COMMIT=\""86aa80b908d7532ab9b6edd6f4f27ba4bf6ba17b"\"   -D USE_JOURNALD=0 -o src/utils.o -c src/utils.c
cc  -o bin/conmon src/conmon.o src/cmsg.o src/ctr_logging.o src/utils.o -lglib-2.0   -lsystemd 
$ make install
install  -D -m 755 bin/conmon /usr/local/bin/conmon

# Setup CNI networking
# Set CNI network configurations
$ cd /root/go/src/github.com/cri-o/cri-o && mkdir -p /etc/cni/net.d
$ cp contrib/cni/*.conf /etc/cni/net.d/
$ ls /etc/cni/net.d/
10-crio-bridge.conf  99-loopback.conf
# Install the CNI plugins
$ git clone https://github.com/containernetworking/plugins ~/go/src/github.com/containernetworking/plugins
$ cd ~/go/src/github.com/containernetworking/plugins && git checkout v0.8.5
$ ./build_linux.sh
Building plugins 
  bandwidth
  firewall
  flannel
  portmap
  sbr
  tuning
  bridge
  host-device
  ipvlan
  loopback
  macvlan
  ptp
  vlan
  dhcp
  host-local
  static
$ mkdir -p /opt/cni/bin
$ cp bin/* /opt/cni/bin/

# Generating CRI-O configuration
$ cd ~/go/src/github.com/cri-o/cri-o/ && make install.config
install  -d /usr/local/share/containers/oci/hooks.d
install  -D -m 644 crio.conf /etc/crio/crio.conf
install  -D -m 644 crio-umount.conf /usr/local/share/oci-umount/oci-umount.d/crio-umount.conf
install  -D -m 644 crictl.yaml /etc
# Path to OCI hooks directories for automatically executed hooks.
hooks_dir = [
        "/usr/local/share/containers/oci/hooks.d",
]

# Validate registries in registries.conf
# Edit /etc/containers/registries.conf and verify that the registries option has valid values in it.
$ cat /etc/containers/registries.conf
[... truncated ...]
[registries.search]
registries = ['registry.access.redhat.com', 'docker.io', 'registry.fedoraproject.org', 'quay.io', 'registry.centos.org']

[registries.insecure]
registries = []

[registries.block]
registries = []

# Recommended - Use systemd cgroups.
# By default, CRI-O uses cgroupfs as a cgroup manager. However, we recommend using systemd as a cgroup manager. You can change your cgroup manager in crio.conf:
cgroup_manager = "systemd"

# Optional - Modify verbosity of logs in /etc/crio/crio.conf
# Users can modify the log_level field in /etc/crio/crio.conf to change the verbosity of the logs. Options are fatal, panic, error (default), warn, info, and debug.
log_level = "info"

# Starting CRI-O
$ make install.systemd
install  -D -m 644 contrib/systemd/crio.service /usr/local/lib/systemd/system/crio.service
ln -sf crio.service /usr/local/lib/systemd/system/cri-o.service
install  -D -m 644 contrib/systemd/crio-shutdown.service /usr/local/lib/systemd/system/crio-shutdown.service
install  -D -m 644 contrib/systemd/crio-wipe.service /usr/local/lib/systemd/system/crio-wipe.service
$ systemctl daemon-reload
$ systemctl enable crio
Created symlink from /etc/systemd/system/multi-user.target.wants/crio.service to /usr/local/lib/systemd/system/crio.service.
# enable crio proxy(pulling image)
$ cat /usr/local/lib/systemd/system/crio.service
[... truncated ...]
[Service]
Environment="GOTRACEBACK=crash" "HTTP_PROXY=x.x.x.x" "HTTPS_PROXY=x.x.x.x" "NO_PROXY=localhost,127.0.0.1"
$ systemctl start crio
$ systemctl status crio
* crio.service - Container Runtime Interface for OCI (CRI-O)
   Loaded: loaded (/usr/local/lib/systemd/system/crio.service; enabled; vendor preset: disabled)
   Active: active (running) since Wed 2020-02-26 22:27:38 CST; 1min 11s ago
     Docs: https://github.com/cri-o/cri-o
 Main PID: 16267 (crio)
   CGroup: /system.slice/crio.service
           `-16267 /usr/local/bin/crio

Feb 26 22:27:37 vm-xxx-centos systemd[1]: Starting Container Runtime Interface for OCI (CRI-O)...
Feb 26 22:27:37 vm-xxx-centos crio[16267]: time="2020-02-26 22:27:37.855228868+08:00" level=warning msg="Not using nat...o fix"
Feb 26 22:27:37 vm-xxx-centos crio[16267]: time="2020-02-26 22:27:37.855645605+08:00" level=info msg="Found CNI networ....conf"
Feb 26 22:27:37 vm-xxx-centos crio[16267]: time="2020-02-26 22:27:37.855703783+08:00" level=info msg="Found CNI networ....conf"
Feb 26 22:27:38 vm-xxx-centos crio[16267]: W0226 22:27:38.114732   16267 hostport_manager.go:69] The binary conntrack ...eanup.
Feb 26 22:27:38 vm-xxx-centos crio[16267]: time="2020-02-26 22:27:38.114771405+08:00" level=info msg="no seccomp profi...fault"
Feb 26 22:27:38 vm-xxx-centos systemd[1]: Started Container Runtime Interface for OCI (CRI-O).  

# Step2: Install crictl
$ VERSION="v1.17.0"
$ wget https://github.com/kubernetes-sigs/cri-tools/releases/download/$VERSION/crictl-$VERSION-linux-amd64.tar.gz
$ tar zxvf crictl-$VERSION-linux-amd64.tar.gz -C /usr/local/bin
crictl
$ rm -f crictl-$VERSION-linux-amd64.tar.gz
# To ensure that we’ve setup CRI-O correctly, we will install crictl to verify our setup.
$ crictl -r unix:///run/crio/crio.sock info 
{
  "status": {
    "conditions": [
      {
        "type": "RuntimeReady",
        "status": true,
        "reason": "",
        "message": ""
      },
      {
        "type": "NetworkReady",
        "status": true,
        "reason": "",
        "message": ""
      }
    ]
  }
}

# Step3: Setting up a single node k8s cluster
$ wget https://github.com/kubernetes/kubernetes/archive/v1.17.1.tar.gz
$ tar -xzf v1.17.1.tar.gz && cd kubernetes-1.17.1
$ hack/install-etcd.sh   
Downloading https://github.com/coreos/etcd/releases/download/v3.4.3/etcd-v3.4.3-linux-amd64.tar.gz succeed
etcd v3.4.3 installed. To use:
export PATH="/root/go/src/github.com/kubernetes-1.17.1/third_party/etcd:${PATH}"
$ export PATH="/root/go/src/github.com/kubernetes-1.17.1/third_party/etcd:${PATH}"
$ CGROUP_DRIVER=systemd \
CONTAINER_RUNTIME=remote \
CONTAINER_RUNTIME_ENDPOINT='unix:///var/run/crio/crio.sock' \
./hack/local-up-cluster.sh
[... truncated ...]
To start using your cluster, you can open up another terminal/tab and run:

  export KUBECONFIG=/var/run/kubernetes/admin.kubeconfig
  cluster/kubectl.sh

Alternatively, you can write to the default kubeconfig:

  export KUBERNETES_PROVIDER=local

  cluster/kubectl.sh config set-cluster local --server=https://localhost:6443 --certificate-authority=/var/run/kubernetes/server-ca.crt
  cluster/kubectl.sh config set-credentials myself --client-key=/var/run/kubernetes/client-admin.key --client-certificate=/var/run/kubernetes/client-admin.crt
  cluster/kubectl.sh config set-context local --cluster=local --user=myself
  cluster/kubectl.sh config use-context local
  cluster/kubectl.sh
$ cluster/kubectl.sh get nodes
NAME        STATUS   ROLES    AGE   VERSION
127.0.0.1   Ready       21m   v1.17.1

# Step4: Generating encrypted image with skopeo
# Install skopeo
$ yum install libgpgme-devel device-mapper-devel libbtrfs-devel glib2-devel libassuan-devel
$ git clone https://github.com/containers/skopeo $GOPATH/src/github.com/containers/skopeo
$ cd $GOPATH/src/github.com/containers/skopeo && make binary-local
$ make install
$ mkdir /etc/containers
$ cp default-policy.json /etc/containers/policy.json
# Pull image
$ skopeo copy docker://docker.io/library/nginx:1.15 oci:local_nginx:1.15
Getting image source signatures
Copying blob 743f2d6c1f65 done  
Copying blob 6bfc4ec4420a done  
Copying blob 688a776db95f done  
Copying config 0fb15759be done  
Writing manifest to image destination
Storing signatures
# Encrypt image
$ skopeo  copy --encryption-key jwe:./mypubkey.pem oci:local_nginx:1.15 oci:nginx_encrypted:1.15
Getting image source signatures
Copying blob 743f2d6c1f65 done  
Copying blob 6bfc4ec4420a done  
Copying blob 688a776db95f done  
Copying config 0fb15759be done  
Writing manifest to image destination
Storing signatures
# Push image
$ skopeo  copy --dest-tls-verify=false oci:nginx_encrypted:1.15 docker://x.x.x.x/nginx_encrypted:1.15  
Getting image source signatures
Copying blob cd2a4504255e done  
Copying blob 8df8b398a84d done  
Copying blob 663a05dac0ac done  
Copying config 0fb15759be done  
Writing manifest to image destination
Storing signatures

# Step5: Getting and running an encrypted image
$ cat < enc-dply.yaml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: enc-nginx
  labels:
    app: nginx
spec:
  replicas: 3
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: x.x.x.x/nginx_encrypted:1.15
        ports:
        - containerPort: 80
EOF
$ cluster/kubectl.sh create -f enc-dply.yaml
deployment.apps/enc-nginx created
$ cluster/kubectl.sh get pods
NAME                         READY   STATUS             RESTARTS   AGE
enc-nginx-7fb4578896-9qhtr   0/1     ImagePullBackOff   0          12s
enc-nginx-7fb4578896-cdrdq   0/1     ErrImagePull       0          12s
enc-nginx-7fb4578896-j94rj   0/1     ErrImagePull       0          12s
# We notice that our pods failed to run due to failure in the image pull process. Let’s describe the pod to find out more.
$ cluster/kubectl.sh describe pods/enc-nginx-7fb4578896-9qhtr
[... truncated ...]
Events:
  Type     Reason     Age                From                Message
  ----     ------     ----               ----                -------
  Normal   Scheduled            default-scheduler   Successfully assigned default/enc-nginx-7fb4578896-9qhtr to 127.0.0.1
  Normal   Pulling    25s (x2 over 36s)  kubelet, 127.0.0.1  Pulling image "x.x.x.x/nginx_encrypted:1.15"
  Warning  Failed     25s (x2 over 36s)  kubelet, 127.0.0.1  Failed to pull image "x.x.x.x/nginx_encrypted:1.15": rpc error: code = Unknown desc = Error decrypting layer sha256:cd2a4504255eaf69fb1ee6c5961625854cd69597a1c5722e86062fb4ab688cf8: missing private key needed for decryption
  Warning  Failed     25s (x2 over 36s)  kubelet, 127.0.0.1  Error: ErrImagePull
  Normal   BackOff    13s (x2 over 36s)  kubelet, 127.0.0.1  Back-off pulling image "x.x.x.x/nginx_encrypted:1.15"
  Warning  Failed     13s (x2 over 36s)  kubelet, 127.0.0.1  Error: ImagePullBackOff
# Configuring decryption keys for CRI-O
$ mkdir -p /etc/crio/keys
$ cat << EOF > /etc/crio/keys/mykey.pem
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
EOF
$ cluster/kubectl.sh delete -f enc-dply.yaml
deployment.apps "enc-nginx" deleted
$ cluster/kubectl.sh create -f enc-dply.yaml
deployment.apps/enc-nginx created
$ cluster/kubectl.sh get pods -o wide
NAME                         READY   STATUS    RESTARTS   AGE   IP            NODE        NOMINATED NODE   READINESS GATES
enc-nginx-7fb4578896-8grjd   1/1     Running   0          61s   10.88.0.102   127.0.0.1              
enc-nginx-7fb4578896-jjhz4   1/1     Running   0          61s   10.88.0.100   127.0.0.1              
enc-nginx-7fb4578896-jv9n5   1/1     Running   0          61s   10.88.0.101   127.0.0.1              
# test with curl
$ curl -v 10.88.0.92
< HTTP/1.1 200 OK
< Server: nginx/1.15.12
< Date: Thu, 27 Feb 2020 09:47:44 GMT
< Content-Type: text/html
< Content-Length: 612
< Last-Modified: Tue, 16 Apr 2019 13:08:19 GMT
< Connection: keep-alive
< ETag: "5cb5d3c3-264"
< Accept-Ranges: bytes
< 



Welcome to nginx!



Welcome to nginx!

If you see this page, the nginx web server is successfully installed and working. Further configuration is required.

For online documentation and support please refer to nginx.org.
Commercial support is available at nginx.com.

Thank you for using nginx.

The main integration points for Encrypted Container Images

镜像加密工具

对于镜像加密工具,社区计划支持:docker CLI(To integrate into docker CLI, we are currently waiting on moby/moby#38043. Tracking with moby/buildkit#714), containerd imgcrypt, skopeo以及buildah,目前已经实现的有containerd imgcryptskopeo

镜像仓库

Docker Distribution >= v2.7.1 支持镜像加密OCI格式

Container Runtime

于Container Runtime,社区计划支持:containerd(+CRI-Containerd)以及cri-o(暂不支持Docker),目前已经实现的有containerd(CRI-Containerd目前正在合并PR)以及cri-o

Kubernetes

目前社区计划对Kubernetes支持两种镜像加密模式:

  • Node Key Model:将密钥放在Kubernetes工作节点上,以节点为解密粒度(CRIO已经实现,CRI-Containerd待合并PR)
  • Multitenant Key Model:多租户模型,支持解密粒度为集群和用户(还未实现,based on this KEP)

另外,对于Node Key Model模式,测试加密流程可行,并对性能评估如下:

  • 1、目前社区对镜像加密这块并没有性能测试数据
  • 2、利用对称加密算法(i.e. AES)加密镜像Layer,加密后数据长度不变——对镜像pull影响不大&解密速度快,耗费时间少
  • 3、Memory would not be that bad since we are using a stream cipher

补充:目前社区对于Docker的支持计划参考如下(我的思考):应该是等到Docker底层代码切换到Containerd(moby/moby#38043),然后修改docker-shim支持镜像加密,所以目前是阻塞的状态

Conclusion

​在容器安全涉及的内容中,目前还不十分成熟的部分是镜像加密镜像加密在数据保密性要求较强的领域中会显得十分重要,例如:金融、银行以及国企等

本文首先介绍了镜像加密涉及的OCI规范,在此基础上对镜像加密原理以及流程进行了说明,并利用containerd imgcrypt工具对加密流程进行了实操。而Kubernetes对镜像加密特性支持Node Key Model以及Multitenant Key Model这两种使用模式,本文详细讲解了Kubernetes基于Node Key Model使用模式的原理&流程,并结合CRIO演示了镜像加密Kubernetes-Native的用法

虽然目前基于社区的工作可以在Kubernetes上使用镜像加密特性,但是该特性的支持还并不完善,比如:对于加密工具,还需要支持docker CLI(To integrate into docker CLI, we are currently waiting on moby/moby#38043. Tracking with moby/buildkit#714);对于容器运行时,还需要支持CRI-Containerd以及Docker等;对于云原生生态系统,还需要更多地与镜像相关的项目(such as Notary, Clair and so on)进行合作;对于Kubernetes,还需要支持更多Key Models

Refs

  • Encrypting container images with containerd imgcrypt!
  • The main integration points for Encrypted Container Images
  • current process
  • How Encrypted Images brings about compliance in Kubernetes (via CRI-O)
  • Support for Encrypted Images in Kubernetes
  • Add Image Decryption KEP
  • What’s the difference between runc, containerd, docker? Well, I asked myself the exact same question…
  • Container Runtimes Part 1: An Introduction to Container Runtimes
  • Encrypted container images for container image security at rest
  • Running CRI-O on kubernetes cluster
  • Encrypting container images with skopeo
  • OCI Container Tools Guide
  • OCI Image Implementations
  • OCI Runtime Implementations
  • OCI Image Manifest Specification
  • CRI: the Container Runtime Interface

你可能感兴趣的:(Docker,安全)