High-Tech Made Easy
The new universal controller eCONTROL Type 8611 brings an essential advantage
for for control variables like flow, temperature, pressure, pH value, conductivity and
level in both pneumatic and electric systems: installation at its easiest. And this with
the highest functional reliability in the system. It saves money, as it is optimally
matched to the sensors and control valves supplied by Bürkert. Installation and
commissioning can be completed at lower costs, while at the same time a higher
product quality is achieved, thanks to the use of components all produced by the
same company.
Line/线芯:
That’s What We Call Versatility
Innovation is introducing something unique. With the
universal controller Type 8611, this uniqueness is versatility.
• For Assembly:
Direct mounting onto the flow sensor, onto a wall
or a DIN rail, onto a solenoid control valve or onto a
control cabinet.
• For the Sensor Inputs:
PT 100, frequency, 4 to 20 mA or 0-10V
• For the Valve Variants:
Solenoid proportional valve, process control valve or
motorized actuators with a 4 to 20mA control signal
Technical Data
ConTrol STrUCTUreS
Continuous control, 2-state control, 3-state control
SenSor InPUTS
4 to 20 mA, 0-10V, PT 100, frequency
ProCeSS VAlUe oUTPUT
4 to 20 mA, 0-10V
ConTInUoUS ConTrol
4 to 20 mA, 0-10V, PWM
QUASI-ConTInUoUS, on/oFF ConTrol
PTM, On/Off
MISCellAneoUS
• Dual temperature/flow rate display
• Binary input for Start/Stop/Open/Close/Safe Position
• Binary outputs for alarms, status messages or 2-state
control
中文翻译参考”:
8611 型通用调节器具有紧凑型的结构方式,非常适合同样采用紧凑型设计的调节系统。这种调节器经测试可兼容与所有 Bürkert 比例阀和传感器,在使用标准信号(4-20 mA、0-10 V 或 PWM 输出信号)的前提下,可以与各种非 Bürkert 调节阀相组合。这种具有 PI 特性的过程调节阀,配备了大量的附加功能。通过 3 个模拟输入端,可以将工艺实际值作为标准信号 (4-20mA / 0-10V)、电阻信号 (PT100) 或频率信号读入。通过电流或电压标准信号或者键盘,可以规定工艺额定值。特别适合温度调节任务,可以设计其下方安装有流量调节装置的级联式结构。通过控制比例阀和过程阀,可以在流体技术领域中完成各种各样的调节任务,也可将其应用于液态的或气态的介质。
BTW:
SAP基本了解
电磁阀原理和应用
过程阀原理及应用
MFC原理及应用
仪表介绍