7za 命令说明

来源:http://hi.baidu.com/hongszh/blog/item/dfd94043001822189213c6b2.html
7-Zip Command-Line Examples
http://dotnetperls.com/7-zip-examples  

By Sam Allen - Updated June 13, 2009

Problem. You have 7za.exe and you want to compress, extract, and update files. The 7-Zip compression utility provides superior compression and is open-source, making it easy to obtain and use. Solution. Review this document for ways to use 7-Zip on the Windows console. There are three general parts to the article: tasks, information, and questions. The most common tasks are listed first.

--- Key points on 7-Zip: ---

Get started with 7-Zip on the command line.
Compress, extract, archive and optimize with 7-Zip.
The executable is usually called 7za.exe.

1. Getting started with 7za.exe

First you need to download the 7-Zip command line executable, 7za.exe . This is the exe you will use to run commands on archives. Go to 7-zip.org and get the "command line version. For convenience and so you don't need to change environment paths, put the 7za.exe file in your user directory. Open the Windows console and test the 7za.exe program out with a few commands. Type in the exe name 7za and the first part will look like this.

7-Zip (A)  4.60 beta  Copyright (c) 1999-2008 Igor Pavlov  2008-08-19

Usage: 7za [...] [...]
[<@listfiles...>]

What that means. That's the grammar of the commands you use on 7za.exe. The first part "command" is the main verb. Then you specify optional switches, the archive name (either source or destination archives) and then files. [My user directory is C:/Users/Sam/.]

2. Using the "a" command

Here we look at how you can use the "a" command with the single letter a. This command stands for 'archive' or 'add'. Use it to put files in an archive. You have to specify the destination archive, and the source files (in that order). The directory C:/Users/Sam contains two files (file1.txt and file2.txt). The command puts those two files in an archive, and you need to type it into the command prompt.

C:/Users/Sam>7za a -t7z files.7z *.txt

7-Zip (A) 4.60 beta Copyright (c) 1999-2008 Igor Pavlov 2008-08-19
Scanning

Creating archive files.7z

Compressing file1.txt
Compressing file2.txt

Everything is Ok

C:/Users/Sam>

Description of the screenshot. To open your archive, right click on it in the file manager and select 7-Zip -> Open archive. The screenshot shows the two text files compressed in files.7z.

3. Using the "d" command

Here we see an example of the "d" command in 7-Zip command lines. This stands for 'delete' and is used much less often. It allows you to remove a certain file (or set of files) from inside an archive. You will need this if you use huge archives and need to save time. From the manual:

7z d archive.zip *.bak -r

7z: use executable
d: delete files
archive.zip: delete from this archive
*.bak: only match bak files
-r: traverse all subdirectories

Example uses. You can also remove only a single file from an archive with "d". This is much more useful when you do not have a solid archive. I find d to be of very limited use in normal situations.

4. Using the "e" command

Here we look at how you can use the "e" command in your console window. "e" stands for extract, and it means to 'unzip' or expand an archive. You must specify the source archive always, and may also specify a destination. "e" extracts everything to a specified directory. Another command "x" can preserve directory structures in archives.

7z e archive.zip

7z: executable
e: use extract command
archive.zip: source archive you want to expand

Overwrite prompts. 7-Zip will always prompt you if there is a file it needs to overwrite to extract the new file. This can be problematic if you are scripting or embedding 7za.exe. In that case, see the -y switch.

5. Using the "l" command

Here we see how you can use the single-letter "l" (lowercase letter ell) command. The lowercase L is used to list the contents of archives and you probably will not need to use it often. I thought I would test it and show an example.

C:/Users/Sam>7za l files.7z

7-Zip (A) 4.60 beta Copyright (c) 1999-2008 Igor Pavlov 2008-08-19

Listing archive: files.7z

Method = LZMA
Solid = +
Blocks = 1
Physical Size = 1202
Headers Size = 172

Date Time Attr Size Compressed Name
------------------- ----- ------------ ------------ ------------------------
2008-10-02 15:48:01 ....A 27216 1030 file1.txt
2008-10-02 15:47:45 ....A 3888 file2.txt
------------------- ----- ------------ ------------ ------------------------
31104 1030 2 files, 0 folders

Description of the output. This shows the listing of a solid archive. The original sizes of the files are 27216 bytes and 3888 bytes. They compress down to 1030 bytes.

6. Using the "t" command

Here we use the "t" command in the 7z program. This command allows you to test the integrity of archives. It stands for 'test' and is much less useful than the "-t" switch. Don't confuse the two. This one is used for diagnostics.

7z t archive.zip *.doc -r

7z: use this executable
t: test the specified archive
archive.zip: the archive you want to test
*.doc: test all these files in the archive
-r: recurse all child directories

7. Using the "u" command

Here we look at the "u" command in 7-Zip, which stands for update . This is a very useful command and is great when you want to replace old files in your archive with newer files. This prevents needing to decompress and recompress the entire archive.

7z u archive.zip *.doc

7z: executable name
u: update command
archive.zip: archive you want to update files in
*.doc: only update these files (Word documents)

Problem with "u". The "u" command doesn't work with solid archives. A solid archive is one where all the files are compressed together. This means that you can't update specific files with the "u" command.

8. Using the "x" command

This command is exactly like "e" except it preserves the full paths. If you have an elaborate or important directory structure, use this option. This would be most useful for system backups or really big backups. Here's the example syntax:

7z x archive.zip

7z: executable name
x: use the extract command
archive.zip: the archive you want to extract all the files from

9. Using the -m switch

Here we look at how you can change the optimization settings in 7-Zip on the command line. This is the most important and useful option you can use. It specifies the method of compression. Here I will show a bunch of options, and also some examples both from my own work and from the manual.

--- Table that shows compression options ---


Compression switch: -mx0
What it means: Don't compress at all.
Is called "copy mode."

Compression switch: -mx1
What it means: Very low compression.
It is called "fastest" mode.

Compression switch: -mx3
What it means: Fast compression mode.
Will set various parameters automatically.

Compression switch: -mx5
What it means: Same as above, but "normal."

Compression switch: -mx7
What it means: "maximum" compression.

Compression switch: -mx9
What it means: "ultra" compression.
(You probably want to use this.)

10. More about -m* switches

Here are a bunch more interesting compression method (-m) switches. The first three are of very limited use the vast majority of the time, but you might benefit from tweaking them. The author's experience is that manual optimizations to these options doesn't produce big benefits.

Switch:   -mfb

Function: Specifies # of fast bytes.
Sometimes help with very "sparse" files.
Don't bother.

Switch: -mpass
Function: Number of passes for deflate compression.
Don't bother with this.
Automatically set with levels.

Switch: -md
Function: Specifies dictionary size.
Automatically set, so don't bother.

Switch: -mmt
Function: Enable multithreading.
Use if: you have quad-core and a really huge archive.
Specify "on" or "off".
This may be enabled by default; check the help file.

11. Using the -t type switch

Here I show how you can specify the precise archive type you want to create. Note that you can specify any filename you want for any type. Some extensions are recommended, however.

--- Table that shows compression format switches ---


Type switch: -t7z
Format: [7Z - Wikipedia]
Example filename: archive.7z (default option)

Type switch: -tgzip
Format: [GZIP - Wikipedia]
Example filename: archive.gzip
archive.gz

Type switch: -tzip
Format: [ZIP - Wikipedia]
Example filename: archive.zip (very compatible)

Type switch: -tbzip2
Format: [BZIP2 - Wikipedia]
Example filename: archive.bzip2

Type switch: -ttar
Format: [TAR - Wikipedia]
Example filename: tarball.tar (UNIX and Linux)

Type switch: -tiso
Format: [ISO - Wikipedia]
Example filename: image.iso

Type switch: -tudf
Format: [UDF - Wikipedia]
Example filename: disk.udf

12. About -t switch usage

The 7-Zip manual provides some useful examples for type switches. It shows the -tiso and -tudf switches. These are not the most common. Almost all of the examples in this document (both original ones and the ones from the 7-Zip manual) use -t switches.

7z a -tiso archive.iso
7z a -tudf archive.udf

7z: executable name
a: add to archive
-tiso or -tudf: format of archive to create
archive.iso or archive.udf: name of archive to create

13. Understanding solid archives

7z is the only file format in 7-Zip that you can specify whether the archive is solid or not. Solid means all the files are compressed as one. It makes it impossible to use the "u" command to update individual files, among other commands.

Switch:   -ms=on

Function: Enable solid mode.
This is the default so you won't often need this.

Switch: -ms=off
Function: Disable solid mode.
This is useful when you need to update individual files.
Will reduce compression ratios normally.

14. More about 7z archives

You can change many values and switches on 7z archives, with endless permutations. Some things you can change are dictionary sizes, FastBytes values, MatchFinder values, and filters. Normally you don't need to deal with these.

15. Using PPMd compression algorithms

With the 7z format, you can actually specify the algorithm used. PPMd is a very fast and effective algorithm for compressing plain text files. This is ideal for large collections of Word documents. In many cases, PPMd does not perform as well on files containing binary data.

PPMd switch:  -mmem=24b

-mmem=24k
-mmem=24m
Function: Control the amount of memory you use.
Useful and higher is normally better.

PPMd switch: -mo=2
-mo=32
Function: Specify model order in PPMd.
Not normally useful.

16. Example compression methods

Here I will show the example compression commands from the 7-Zip manual. I demonstrated the most simple ones at the start of this document, and these are more complex.

7z a -tzip archive.zip *.jpg -mx0

7z: name of executable
a: add to archive command
-tzip: specify a ZIP archive (useful for compatibility)
archive.zip: destination archive
*.jpg: only add jpg files to archive
-mx0: don't compress, just copy
useful for already-compressed files

Example of 7z format. This next command line shows how you can create a solid 7z archive of program files (executables). It uses multithreading mode, which means it will be very fast on a dual core machine.

7z a -t7z archive.7z *.exe *.dll -ms -mmt

7z: name of executable
a: archive command specified
-t7z: use 7z file type (less compatible and smaller results)
archive.7z: destination archive file
*.exe: include all *.exe files in directory in new archive
*.dll: include all *.dll files in new archive
-ms: create solid archive (default)
-mmt: multithread the operation (faster)

17. Creating PPMd archive

PPMd is an extraordinary algorithm for compressing text and is relatively new. Here I show a command in the 7-Zip manual that compresses all the text files in the working directory into a PPMd archive. The command is useful because you will normally want to only compress *.txt files with PPMd. (*.html and *.doc are useful too.) You need to use 7z to use PPMd. [PPMd Compression Benchmark in 7-Zip - dotnetperls.com]

7z a -t7z archive.7z *.txt -m0=PPMd

7z: executable name/path
a: add command specified
-t7z: use the 7z format (needed for PPMd)
archive.7z: destination archive file
*.txt: select all text files
-mo=PPMd: compress with this algorithm

18. Using the -o switch

Here we look at the "o" switch on the 7-Zip command line. Sometimes you do not want to extract to the current directory. This is where -o can come in handy. Use this to set the destination directory.

7z x archive.zip -oC:/Doc

7z: executable name
x: extract archive with paths intact
archive.zip: archive to extract files from
-oC:/Doc: extract all files to the Doc folder on the C: drive

19. Using the -p switch

Here we look at how you can use the "-p" switch, which refers to the word "password". This is really helpful when security and encryption is involved. You can specify a password on the command line. The syntax is a bit funky, so the next couple examples might help.

7za a pw.7z *.txt -pSECRET

7za: name and path of 7-Zip executable
a: add to archive
pw.7z: name of destination archive
*.txt: add all text files to destination archive
-pSECRET: specify the password "SECRET"

Opening password-protected archives. This next console output shows what happens when you try to open the password-protected archive. The password here is SECRET, which will allow the archive to be extracted.

C:/Users/Sam>7za x pw.7z

7-Zip (A) 4.60 beta Copyright (c) 1999-2008 Igor Pavlov 2008-08-19

Processing archive: pw.7z


Enter password:

Header encryption. Add -mhe to encrypt headers. The password command will automatically deal with encrypted headers. Remember, encrypted headers will hide the names of the files in your archive.

20. More switches

Here we take a closer look at many switches that are of limited use to most people. They are useful to know, however, in case you ever need to use them. Usually you can do better just by using the defaults that are slightly adjusted for your requirement.

Switch:   -ssc

Function: Specify case-sensitive mode.
Useful for going between Linux and Windows.
Default: -ssc- on Windows (insensitive)
Default: -scc on Linux (sensitive)


Switch: -ssw
Function: Compress locked files.
Use if: you have problems with opening files.

Switch: -w
Function: Set working directory.
Use when you want to specify temp folders.

21. Case-sensitive example

Here we look at how you can use case-insensitive file names in the 7-Zip command line. For those of you who use both Linux and Windows, the case-sensitive option is useful. I will show my own example here with some explanation.

7za.exe a archive.7z Z*.* -ssc

7za.exe: 7-Zip command-line executable path and name
a: archive command
archive.7z: add files to this target archive
Z*.*: select only files whose first letter is a capital Z

22. Using the -v switch and volumes

Here we note how you can use the "v" switch on the command line. In data compression, a volume is a segment of a dataset that is a certain number of bytes long. The volume switch in 7za.exe allows you to specify the exact size in bytes, kilobytes, or megabytes. Additionally, you can specify sequential volumes.

23. Using the -ao switch

Here we look at the "ao" switch, which allows you to specify whether you to to overwrite old files. Be very careful here because you cannot restore an overwritten file normally. It takes another argument. Make sure to back up your data by copying the files in your file manager first.

~~~ Table that shows -ao switches ~~~


Switch: -aoa
Overwrite all destination files.

Switch: -aos
Skip over existing files without overwriting.
Use this for files where the earliest version is most important.

Switch: -aou
Avoid name collisions.
New files extracted will have a number appending to their names.
(You will have to deal with them later.)

Switch: -aot
Rename existing files.
This will not rename the new files, just the old ones already there.
Use when the new files are more important.

~~~ Example of the switches ~~~

7z x test.zip -aoa

7z: use the 7-zip executable
x: use the extract command
test.zip: extract files from this archive
-aoa: overwrite all existing files. risky!

24. Questions

There are many more possibilities and usages of the 7-Zip program on the command line in both Windows and Linux. This section answers some questions the author had when doing this research, and also some questions that you may have.

How do I add many files to one archive? Use the "a" command and the wildcard * symbol. Specify the name of the destination archive file and the source files afterwards. Read more in the section Information: "a" command.

How do I add many files with a specific extension? Use the "a" command and the wildcard * symbol, but specify the extension after the wildcard. *.txt means all text files. You can use the wildcard anywhere, even matching all files of a certain name with any extension.

How can I add many files from an entire subdirectory? Specify just the directory name. You do not need to use a wildcard at all. The 7-Zip manual helpfully shows this example, which specifies an entire directory called "subdir".

7z a -tzip archive.zip subdir/

7z: use executable
a: add to archive
-tzip: use zip compression
archive.zip: create this archive
subdir/: source directory

Why can't I update my archive? It is probably a solid archive. 7z archives are by default solid archives, which mean all the files are compressed together. Change the archive to not be solid if you want to update it. (Search this page for "solid".)

When should I use PPMd? You should use PPMd when you have a large corpus (body) of text. This could include HTML or other formatting, but plain text should dominate. My past research has shown that it can improve ratios by around 30% on some datasets.

How can I stop 7-Zip from prompting me? Use the -y switch. This will assume a yes answer to all prompts. Use this only when you are really confident that you are not going to lose any data.

How can I specify the output directory? By using the "e" command and combining it with the -o switch. The syntax with -o is a bit funny so I will show the example from the 7-Zip help file. Here's how it works.

7z e archive.zip -oC:/soft *.cpp -r

7z: executable
e: use extract command
archive.zip: source archive you want to extract from
-oC:/soft: the destination folder (-o is the switch and C:/soft is the argument)
*.cpp: only extract cpp files (C++)
-r: traverse all subdirectories

How do I use GZip compression? By specifying the "-tgzip" option for the type switch. Note: this makes a really great way to compress files on your web server for HTTP compression. See "Is this document compressed?" section below.

How do I use BZip2? You can use BZip2 by specifying the "-tbzip2" switch. This can be combined with any compression level in the above charts. The different modes in 7-Zip use many different settings, automatically.

How do I use 7z format? By specifying the "-t7z" switch for type. Or you can simply omit the type switch and that will default to 7z. This format offers the greatest compression rations, but it doesn't work in all places.

How can I see what's inside an archive? Use the "l" command as shown above. You might want to use "l" in a utility that you run from a command line to make sure your batch archiving works properly.

How can I exclude certain files? Near the start we saw how to add files based on filters, but sometimes you want to exclude certain files manually. Use the -x switch (followed immediately with an exclamation mark and then the filename). So if you want to exclude "file1.txt", use the switch "-x!file1.txt". It it important to remember to use the exclamation mark as a separator between the -x part and the filename.

How can I replace files already on disk with new files? By using the -ao switch, described above. There are other options, and it is usually a better idea to use one of the renaming options (-aou or -aot).

How can I ignore extracting files already on disk? Specify the -aos option, which means "skip overwriting files." This will cause 7za.exe to not copy the newer files out of the archive. Use if your files don't change over time and overwriting would just be a waste.

How can I change internal settings? Read the 7-Zip manual about compression options. Note that you do not need to do this normally, as they are set automatically. I really recommend just using the -mx=0, -mx=3, -mx=5, -mx=7, and -mx=9 settings. An in-depth study would be fascinating.

What values can I change in the internals? You can change compression filters, which change behaviors on executable files such as *.exe and *.dll. You can enable header compression and encryption (-mhc=on and -mhe=on). Header compression is by default enabled.

How can I embed 7-Zip? You can embed 7-Zip in a Windows .NET program using the tutorial in my article about .NET 7-Zip. This yields the same great compression but in your own GUI. The link shows some compression ratios. [.NET 7-Zip Executable Tutorial - dotnetperls.com]

Can I use AdvanceCOMP to improve compression ratios? Yes, but the improvement is often very small, less than 1%. 7-Zip and AdvanceCOMP use the same Deflate encoder, but AdvanceCOMP has more options and is more fine-grained. [Advance Projects - AdvanceCOMP - advancemame.sourceforge.net]

25. Contributors

This document was written by Sam Allen after he studied the 7-Zip help manual for many hours. See his work with 7za.exe embedded in programs written in the C# language. Corrections have been suggested by Paul Smith and Matthew Bruce Smith. Dot Net Perls thanks all contributors. The last update to this page was made in May, 2009 on the domain dotnetperls.com.

26. Is this document compressed?

Yes, this document is compressed with the 7za.exe executable and uses -mx9 level GZIP compression with some post-processing to remove the file name in the source. Website performance experts sometimes recommend pre-compressing files on web servers manually, which is an excellent thing to do with 7-Zip.

27. Summary

Here we saw ways you can invoke 7-Zip on the command line, providing superior compression with an open-source tool. We saw ways to create new archives, add to existing archives, use different formats for compression, and use various strengths of compression. The author suggests you try the different options, balancing time required for compression and strength of compression.

你可能感兴趣的:(compression,archive,command,wildcard,file,encryption)