Android系统移植之arm移植步骤

Android Porting Steps for ARM

he following are the porting steps.

0. Setting Compiler
- Environment variables for ARM compiler
- export ARCH=arm
- export CROSS_COMPLIE=arm-eabi-

- export PATH=$PATH:(Android Source Directory)/prebuilt/linux-x86/toolchain/arm-eabi-4.3.1/bin

1. Kernel Compile : Android kernel for 6410
- Get Android sources.
- Use patch with this diff file (Should use 2.6.29 kernel version)

- make zImage

2. Android
- Should fix battery and AC power logic with attached source codes.
/hardware/libhardware_legacy/power/power.c
/frameworks/base/services/jni/com_android_server_BatteryService.cpp

- Just make!

3. Sound Driver
- ALSA interface does not recognized in original android source.
So need to fix up followings,
- Apply alsa library , audio interface
- git clone git://android.git.kernel.org/platform/external/alsa-lib.git
- git checkout origin/master ==> copy alsa-lib directory to external directory (cp -a)
- git clone git://android.git.kernel.org/platform/hardware/alsa_sound.git
- git checkout origin/master ==> copy alsa_sound directory to hardware directory (cp -a)
- Modify file "build/target/board/generic/BoardConfig.mk"
- BOARD_USES_GENERIC_AUDIO := false
- BOARD_USES_ALSA_AUDIO := true

- make!

Android Porting Notes

Here goes the porting guide of Android to real ARM device.

1) Frame Buffer
Android using "fb0" in following order.
1. /dev/graphics/fb0
2. /dev/fb0
You need to tune following factors
* frame buffer size
* use double buffer to "memory mapped files"
* you have to span virtual resolution 2x times in driver inside.
* xres_virtual = xres
* yres_virtual = yres * 2
* double buffering

* using IOCTL command, exchange coordination of yres to y 0

2) Touch Screen
* Android opens input device directly, and returns the absolute coordination of the screen.
* Porting TS-lib to driver and do normarlization of the coordination.

* Do auto calibration using "sysfs" in booting procedure

3) Network
* Android using OS (eg, Linux) network directly, but handle DNS directly.
* DNS lookup order follows
1. /system/etc/hosts lookup
2. system_property [net.eth0.dns1]
* system_property is provided android init process using unix domain socket @property_service
* You should run "init" process for network management.
* You should set up DNS 'net.eth0.dns1' using "/system/bin/setprop", "/etc/default.prop",

"/data/local.prob"

4) Init process
Android init do make "device file" and...
1. /data and it's subdir.
2. execute /etc/init.rc
3. make /tmp/eventlog
4. provide system property using unix domain socket @property_service
load following order,
/etc/default.prop
/system/build.prop
/system/default.prop
/data/local.prop
* You shoud start "init" process for proper network/application setting.
* Init opens "/system_properties" and do memory mapping of it.
* JFFS2 filesystem does not support "write" operation of memory mapped I/O

* For device bootstrap, use it's own init program

Android Target Demo Video
We've made a video clip of our demonstration.
We will post another porting guide later.
l Target HW
After digging Android a few days, we successfully ported Android to our evaluation board (PXA270,
Intel Xscale ARM) including network and touch screen. We know some people already have done
similar work with this, but we didn't find the actual working network/touch device yet.
So we want to share our experience with you guys.
Ok, here goes our working process,
We've chosen the target to Intel bulverde evaluation board. Why this one? Actually there is no technical
reason. Just selected because we have this one for our Linux project, and thought Xscale would be fit
for our project.
Here are the technical spec of our bd,
-------------------------------
Intel Bulverde evaluation board :
- PXA270 520MHz
- SDRAM 128MB
- NAND 32 MB
- 7inch TFT LCD : 800x480
- 2GB USB Storage
-------------------------------

Here are our porting procedure step by step.

* get Linux 2.6.23.8 from kernel.org
* Port 2.6.23.8 to target board
* CONFIG_AEABI=y
* CONFIG_BINDER=y
* CONFIG_LOW_MEMORY_KILLER=y
* CONFIG_INITRAMFS_SOURCE=""
* CONFIG_CC_OPTIMIZE_FOR_SIZE=y

--- EABI toolchain?

* Prepare Filesystems
* rootfs : jffs2 : using acumen270 rootfs as is
* extract android filesystem contents
* / : extract gzipped cpio
* /system & /data : download from benno(http://benno.id.au/blog/ )'s
* build ext2 fs images for /system & /data
* mount /system & /data
* put android files to /etc
init.rc default.prop system.conf system.d init.gprs-pppd init.ril hcid.conf
* put android init-modified in /
* if you have jffs2 for / patch /init
* modify with hexedit : "/system_property" -> "/tmp/sy_property"

* NOTE: jffs2 does not support memory mapped file

* patch /etc/init.rc
---- begin : init.rc
....
## qemu-init {
## exec /etc/qemu-init.sh
## }
network-property {
exec /etc/set_network.sh
}
....

----- end : init.rc

* put this script to /etc/
------ begin : set_networkprop.sh
export PATH=/sbin:/bin:/usr/bin:/system/bin
LOCALIP=`ifconfig|grep "inet addr" |head -1|sed -e
"s/.*addr:\([0-9\.]*\) .*/\1/g"`
DNSIP=`nslookup localhost|grep Address|head -1|sed -e "s/.* //g"`
/system/bin/setprop net.eth0.dns1 $DNSIP
/system/bin/setprop net.gprs.local-ip $LOCALIP
/system/bin/setprop ro.radio.use-ppp no
/system/bin/setprop ro.config.nocheckin yes

----- end : set_networkprop.sh

* Execute a-run.sh as root
----- begin : a-run.sh
export PATH=/system/sbin:/system/bin:/sbin:/bin:/usr/bin
export LD_LIBRARY_PATH=/system/lib
export ANDROID_BOOTLOGO=1
export ANDROID_ROOT=/system
export ANDROID_ASSETS=/system/app
export ANDROID_DATA=/data
export EXTERNAL_STORAGE=/sdcard

export DRM_CONTENT=/data/drm/content

### copy Android files to /etc if not exists there.
copy_if_not_in_etc () {
if /usr/bin/test ! -e /etc/$1; then
cp -vR /home/android/etc/$1 /etc
fi
} copy_if_not_in_etc init.rc
copy_if_not_in_etc default.prop
copy_if_not_in_etc system.conf
copy_if_not_in_etc system.d
copy_if_not_in_etc init.gprs-pppd
copy_if_not_in_etc init.ril
copy_if_not_in_etc hcid.conf
copy_if_not_in_etc set_networkprop.sh
umask 000
/bin/chmod -R a+rw /data /tmp
/bin/chmod a+rw .
/bin/chmod -R a+rw data*
/init-modified &

------ end : a-run.sh

* have fun :)
you may see android with network enabled

-----------------------------------------------

* NOTICE
(1) you need world wide write permission on
* /data /tmp $PWD
* /dev/binder /dev/fb0
(2) never run dbus-daemon, app_process, runtime by yourself.
(android) init will do it for you
------------------------------------------------------------
Lesson Learned ;
* you don't need /data filesystem image from begining. /init will create
* you need /data /tmp write permissions for other(not root) users (app)
* w/o, app may killed with Segmentation Fault
* you need /init(of android) process for system property service
* / should be ramfs for memory mapped file /system_property created by /init
* you can edit /init with hexedit ; /system_property -> /tmp/sy_property
* you need system property service for network (net.eth0.dns1 for DNS
lookup)
* to see log (in strace detail) you need /dev/log/{main,events,radio}
* just do
# rm /dev/log (if you have)
# mkdir /dev/log;touch /dev/log/{main,events,radio}
* you can see usefull infos from strace log and /dev/log/main
* you may run /init on some directory with write permission.
* init create data/ databases on running directory which cannot found in
emulator.
------------------------------------------------