Android FFmpeg开发(一)，FFmpeg编译与集成

一、准备交叉编译环境

我的环境如下：

• 系统：ubuntu20.04
• NDK版本：r17c

NDK构建交叉工具链的方法参考：https://developer.android.com/ndk/guides/standalone_toolchain?hl=zh-cn

NDK r17c下载链接：https://developer.android.com/ndk/downloads/older_releases?hl=zh-cn#ndk-17c-downloads，下载之后解压，我的NDK解压路径为：/work/android/sdk/ndk/android-ndk-r17c/

安装独立工具链需要安装python，如果没有，安装下：

lorien@ubuntu-20: sudo apt-get install python

然后执行工具链构建脚本：

lorien@ubuntu-20: cd /work/android/sdk/ndk/android-ndk-r17c/build/tools/

lorien@ubuntu-20: ./make_standalone_toolchain.py \
    --arch arm64 \
    --api 21 \
    --install-dir /work/tmp/android-toolchain

–install-dir参数指定了交叉工具链的路径，进入该目录看下：

lorien@ubuntu-20: cd /work/tmp/android-toolchain/
lorien@ubuntu-20: ls
aarch64-linux-android  COPYING       COPYING.LIB      lib      manifest_4691093.xml     MODULE_LICENSE_MIT  repo.prop  test
AndroidVersion.txt     COPYING3      COPYING.RUNTIME  lib64    MODULE_LICENSE_BSD_LIKE  NOTICE              share
bin                    COPYING3.LIB  include          libexec  MODULE_LICENSE_GPL       prebuilt_include    sysroot

几个比较重要的目录：

• bin目录：里面是编译、链接可执行工具
• sysroot：里面是基础库的头文件和lib

二、交叉编译ffmpeg

首先，下载ffmpeg源码：

lorien@ubuntu-20: git clone https://git.ffmpeg.org/ffmpeg.git ffmpeg

进入ffmpeg源码根目录，编写配置脚本config-arm64.sh：

#!/bin/bash

export PATH=$PATH:/work/tmp/android-toolchain/bin

SYSROOT=/work/tmp/android-toolchain/sysroot
target_host=aarch64-linux-android

export CFLAGS="-fPIC -D__ANDROID_API__=21 -I$SYSROOT/usr/include"
export LDFLAGS="-L$SYSROOT/usr/lib"

./configure --cross-prefix=$target_host- \
	--enable-cross-compile \
	--sysroot=$SYSROOT \
	--arch=aarch64 \
	--target-os=linux \
	--enable-static \
	--disable-shared \
	--enable-gpl \
	--enable-nonfree \
	--disable-debug \
	--enable-small \
	--disable-ffmpeg \
	--disable-ffplay \
	--disable-ffprobe \
	--disable-doc \
	--disable-devices \
	--disable-avdevice \
	--disable-postproc \
	--prefix=$(pwd)/install/

make clean
make -j4
make install

编译可能遇到错误：

错误一：

libavcodec/aaccoder.c: In function 'search_for_ms':
libavcodec/aaccoder.c:803:25: error: expected identifier or '(' before numeric constant
                     int B0 = 0, B1 = 0;
                         ^
libavcodec/aaccoder.c:865:28: error: lvalue required as left operand of assignment
                         B0 += b1+b2;
                            ^
libavcodec/aaccoder.c:866:25: error: 'B1' undeclared (first use in this function)
                         B1 += b3+b4;
                         ^
libavcodec/aaccoder.c:866:25: note: each undeclared identifier is reported only once for each function it appears in
make: *** [libavcodec/aaccoder.o] Error 1

解决：将libavcodec/aaccoder.c文件B0变量替换成b0

错误二：

libavcodec/hevc_mvs.c: In function 'derive_spatial_merge_candidates':
libavcodec/hevc_mvs.c:208:15: error: 'y0000000' undeclared (first use in this function)
             ((y ## v) >> s->ps.sps->log2_min_pu_size))
               ^
libavcodec/hevc_mvs.c:204:14: note: in definition of macro 'TAB_MVF'
     tab_mvf[(y) * min_pu_width + x]
              ^
libavcodec/hevc_mvs.c:274:16: note: in expansion of macro 'TAB_MVF_PU'
     (cand && !(TAB_MVF_PU(v).pred_flag == PF_INTRA))
                ^
libavcodec/hevc_mvs.c:368:23: note: in expansion of macro 'AVAILABLE'
     is_available_b0 = AVAILABLE(cand_up_right, B0) &&
                       ^
libavcodec/hevc_mvs.c:208:15: note: each undeclared identifier is reported only once for each function it appears in
             ((y ## v) >> s->ps.sps->log2_min_pu_size))

解决: 将libavcodec/hevc_mvs.c文件的变量B0改成b0，xB0改成xb0，yB0改成yb0

错误三：

libavcodec/opus_pvq.c: In function ‘quant_band_template’:
libavcodec/opus_pvq.c:498:9: error: expected identifier or ‘(’ before
numeric constant
int B0 = blocks;
^ libavcodec/opus_pvq.c:559:12: error: lvalue required as left operand of assignment
B0 = blocks;
^ make: *** [libavcodec/opus_pvq.o] Error 1

解决：将libavcodec/opus_pvq.c文件的变量B0改成b0

编译成功后，我们通过make install进行安装，看下最终编译产物：

lorien@ubuntu-20: cd /work/android/media/ffmpeg/install/
lorien@ubuntu-20: ls
include  lib  share

lorien@ubuntu-20: cd lib
lorien@ubuntu-20: ls
libavcodec.a  libavformat.a  libavutil.a  libswresample.a  libswscale.a  pkgconfig

可以看到在lib下有一系列静态库文件。.a文件有点多，下面我们将所有.a文件通过aarch64-linux-android-ld命令打包一个so文件，方便后面引入，ld命令各参数的含义不做过多解释，大家自行google，打包脚本如下：

#!/bin/bash

export PATH=$PATH:/work/tmp/android-toolchain/bin
SYSROOT=/work/tmp/android-toolchain/sysroot

aarch64-linux-android-ld -rpath-link=-L$SYSROOT/usr/lib \
    -L$SYSROOT/usr/lib \
    -lc -lm -lz -ldl \
    -soname libffmpeg.so \
    -shared \
    -nostdlib \
    -Bsymbolic \
    --whole-archive \
    --no-undefined \
    -o libffmpeg.so \
    libavcodec.a libavformat.a libavutil.a libswresample.a libswscale.a \
    $SYSROOT/../lib/gcc/aarch64-linux-android/4.9.x/libgcc.a

通过ld命令，将所有.a文件打包成libffmpeg.so文件。接下来再用strip命令优化下so：

lorien@ubuntu-20: aarch64-linux-android-strip libffmpeg.so

至此，libffmpeg.so库文件就已经制作好了。

三、集成

首先，我们使用Android Studio创建一个native工程：HelloFFmpeg，创建将上面编译产物拷贝到工程相应目录下，需要拷贝的内容分为：头文件和库文件两个部分。

产物拷贝进工程之后，接下来我们编写CMakeList.txt，指定编译参数，主要指定ffmpeg头文件以及库文件等编译参数：

cmake_minimum_required(VERSION 3.10.2)

project("helloffmpeg")

include_directories(
        include
        ${CMAKE_SOURCE_DIR}/util)

add_library( # Sets the name of the library.
        hello-ffmpeg

        # Sets the library as a shared library.
        SHARED

        # Provides a relative path to your source file(s).
        hello-ffmpeg.cpp)

add_library(ffmpeg SHARED IMPORTED)
set_target_properties(ffmpeg PROPERTIES IMPORTED_LOCATION ${CMAKE_SOURCE_DIR}/../jniLibs/${ANDROID_ABI}/libffmpeg.so)

find_library( # Sets the name of the path variable.
        log-lib

        # Specifies the name of the NDK library that
        # you want CMake to locate.
        log)

target_link_libraries( # Specifies the target library.
        hello-ffmpeg

        # Links the target library to the log library
        # included in the NDK.
        ${log-lib}
        ffmpeg)

接着，我们编写JNI调用下ffmpeg相关接口，并通过Android TextView组件予以展示：

#include 
#include 

#include "util/LogUtil.h"

extern "C" {
#include "libavcodec/version.h"
#include "libavcodec/avcodec.h"
#include "libavformat/version.h"
#include "libavutil/version.h"
#include "libavfilter/version.h"
#include "libswresample/version.h"
#include "libswscale/version.h"
}

extern "C" JNIEXPORT jstring JNICALL
Java_com_example_helloffmpeg_media_FFMediaPlayerKt_nativeGetFFmpegVersion(
        JNIEnv* env,
        jclass clazz) {

    char strBuffer[1024 * 4] = {0};
    strcat(strBuffer, "libavcodec : ");
    strcat(strBuffer, AV_STRINGIFY(LIBAVCODEC_VERSION));
    strcat(strBuffer, "\nlibavformat : ");
    strcat(strBuffer, AV_STRINGIFY(LIBAVFORMAT_VERSION));
    strcat(strBuffer, "\nlibavutil : ");
    strcat(strBuffer, AV_STRINGIFY(LIBAVUTIL_VERSION));
    strcat(strBuffer, "\nlibavfilter : ");
    strcat(strBuffer, AV_STRINGIFY(LIBAVFILTER_VERSION));
    strcat(strBuffer, "\nlibswresample : ");
    strcat(strBuffer, AV_STRINGIFY(LIBSWRESAMPLE_VERSION));
    strcat(strBuffer, "\nlibswscale : ");
    strcat(strBuffer, AV_STRINGIFY(LIBSWSCALE_VERSION));
    strcat(strBuffer, "\navcodec_config : ");
    strcat(strBuffer, avcodec_configuration());
    strcat(strBuffer, "\navcodec_license : ");
    strcat(strBuffer, avcodec_license());
    LOGD("GetFFmpegVersion\n%s", strBuffer);

    return env->NewStringUTF(strBuffer);
}

最终，TextView展示内容如下：

四、总结

本文我们借助Android NDK对ffmpeg进行了交叉编译，同时在Android工程完成了集成，接下来，我们将通过FFmpeg对MP4格式的视频进行解码，并在Android surfaceview上展示出视频画面。感兴趣的朋友欢迎继续阅读：Android FFmpeg开发(二)，实现视频解码和渲染

附上源码地址

git clone [email protected]:lorienzhang/HelloFFmpeg.git
# 检出 v1 tag 进行查看
git checkout v1