首先部署下面的代币合约，创建一个5亿的SB代币
ERC20代币并不能像Ether一样使用sendTo.transfer(amt)来转账，ERC20代币只能通过token中定义的transfer方法来转账，每个账户的余额信息也只保存在token合约的状态变量中。如果要使用除token合约之外的合约进行ERC20代币的转账，那就需要这个合约能够调用ERC20代币合约中的transfer方法。
pragma solidity ^0.4.15;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract RCCCToken {
// Public variables of the token
string public name = "SbToken";
string public symbol = "SB";
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function RCCCToken() public {
totalSupply = 500000000 * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
}
接着创建另一个合约来调用该代币合约的接口
pragma solidity ^ 0.4.0;
/*
+------------------------------------------------------------------------------+
| |
| XX XXXXX XXXXXX XXXXXXXXXXX XXXXXXXXXX |
| XX XX XXX XXX XXX X X X X |
| XX XX X X X XXXXXXXXXXX X X |
| XXXXXXXXX X X X X X |
| XX XX X X X X X |
| XX X X X XXXXXXXXXXX X X |
| |
| |
+------------------------------------------------------------------------------+
*/
contract RCCCToken{ //interface也可以，目前还不知道其中区别，后期更新
//以下是该合约实现的方法和公用变量
string public name = "RCCC Token";
string public symbol = "RCCC";
uint8 public decimals = 18;
uint256 public totalSupply;
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
function transfer(address _to, uint256 _value) public;
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success);
function approve(address _spender, uint256 _value) public;
function approveAndCall(address _spender, uint256 _value, bytes _extraData);
function burn(uint256 _value) public returns (bool success);
function burnFrom(address _from, uint256 _value) public returns (bool success);
}
contract A {
RCCCToken public RCCC = RCCCToken(0x3110700EC98A8dd4e576c3e82BB63007a688D997);//初始化该合约
uint256 public a;//创建的合约代币总数
function getbalance() public payable returns(uint)
{
a=RCCC.totalSupply();//查询该代币总量赋值给a
}
}