Why you want to be restrictive with shrink of database files [From karaszi]
From: http://www.karaszi.com/SQLServer/info_dont_shrink.asp
Overview
If you want the really short story, then check out this analogy - hopefully you come back here and read the full story. Introduced in SQL Server 7.0 was the ability automatically grow and to shrink the physical size of database data and transaction log files. Auto grow of files doesn't happen before the file is full, it happens when new space is needed (like when an insert is performed), so the user will wait the time it takes to grow until the modification is completed.
Auto grow and shrink can be very useful under special circumstances, for example after archiving data to some other location. However, we often see DBA's doing shrink on a regular basis and the purpose of this article is to explain some of the downsides of shrink and what actually happens when you shrink a database file. Also, it is worth noticing that the auto grow functionality was mainly added so the dba wouldn't be paged in the middle of the night because the database is full. It was never intended to be a high performance feature or to replace the need to manage space usage, especially at the high end
Acknowledgements
I like to thank Mark Allison and Kalen Delaney who provided valuable suggestions and input for this article.
Versions of SQL Server
This article applies to SQL Server 2000, 2005 and 2008, where not noted otherwise.
More information
You can shrink a database file using either DBCC SHRINKDATABASE (which targets all files for the database) or DBCC SHRINKFILE (which targets a particular database file). I prefer SHRINKFILE. I will not go through the details of the commands here; they are documented in SQL Server Books Online. Let us first determine what actually happens when you shrink a database file:
Shrinking of data file
When you shrink a data file, SQL Server will first move pages towards the beginning of the file. This frees up space at the end of the file and the file can then be shrunk (or as I like to view it: "cut off at the end").
Management of transaction log file
This section is only to serve as a brief introduction to the topic of transaction log file management. See below for reference.
Each modification performed in the database is reflected in the transaction log file. Needless to say, these log records need to be removed (or actually: overwritten) sooner or later - or else we would end up with a huge log file, or a full log file.
One way is to set the database to simple recovery model. This mean that SQL Server will automatically mark inactive log records as "OK to overwrite" (a.k.a. "truncate the log" or as I like to call it: "empty the log").
Another option is to have the database in full or bulk_logged recovery model and perform regular transaction log backups (BACKUP LOG). The transaction log is emptied when you backup the log. Note that the log is *not* emptied for other backup types (like BACKUP DATABASE).
See the SQL Server Books Online reference http://msdn.microsoft.com/en-us/library/ms345583.aspx for details. Make sure you read all the subsections. It is worth some 30 minutes of your time to understand how to manage the transaction log. Trust me on this.
Shrinking of transaction log file
SQL Server cannot move log records from the end of the log file toward the beginning of the log file. This means that SQL Server can only cut down the file size if the file is empty at the end of the file. The end-most log record sets the limit of how much the transaction log can be shrunk. A transaction log file is shrunk in units of Virtual Log Files (VLF). You can see the VLF layout using the undocumented DBCC LOGINFO command, which returns one row per virtual log file for the database: DBCC LOGINFO('myDatabase')
FileId
FileSize
StartOffset
FSeqNo
Status
Parity
CreateLSN
2
253952
8192
11
0
128
0
2
253952
262144
13
0
128
0
2
270336
516096
12
0
128
7000000025000288
2
262144
786432
14
2
128
9000000008400246
- Simple recovery model
USE dbname
CHECKPOINT
--First param below is fileno for log file, often 2. Check with sys.database_files
--Second is desired size, in MB.
DBCC SHRINKFILE(2, 500)
DBCC SQLPERF(LOGSPACE) --Optional
DBCC LOGINFO --Optional
Now repeate above commands as many times as needed! - Full or bulk_logged recovery model
USE dbname
BACKUP LOG dbname TO DISK = 'C:\x\dbname.trn'
--First param below is fileno for log file, often 2. Check with sys.database_files
--Second is desired size, in MB.
DBCC SHRINKFILE(2, 500)
DBCC SQLPERF(LOGSPACE) --Optional
DBCC LOGINFO --Optional
Now repeate above commands as many times as needed!
What you end up doing is empty the log (CHECKPOINT or BACKUP LOG) and DBCC SHRINKFILE several times, so that SQL Server can move the head of the log to beginning of the file and also so the end of the file becomes unused. Investigate the layout of the log file using DBCC LOGINFO in between.
If you have loads of VLF (many rows returned from DBCC LOGINFO), you probably had a small file size for the log initially and then had lots of small autogrow. Having lots of VLF is a a performance hit, especially for database recovery and batch modifications. See this and this great blog posts by Linchi Shea. If this is your case, consider shrinking the log file to a very small size and then expand the file size to some comfortable larger size. Here are some articles specifically about management of log file size:
Shrinking the Transaction Log in SQL Server 2000 with DBCC SHRINKFILE
Log File Grows too big
Considerations for Autogrow and AutoShrink
So what is the problem? Why shouldn't I shrink database files on a regular basis?
Have a look at below list and then you can determine for yourself whether or not you want to shrink database files regularly:
- Each page moved will be logged to the transaction log.
Say you have a database with 50GB used space (data and indexes pages), and the shrink will shuffle 40 GB towards the beginning of the file. The log file will for this shrink operation need 40GB, likely auto-grow to that size (if you don't have 40GB free space in the log file already). The following log backup wll be 40GB in size, plus the "regular" log records. This doesn't seem to happen if the database is in simple recovery mode, possibly beacuse CHECKPOINT will prune the log regurarly during the shrink.
(Applies to shrinking of data files.) - After the shrink, as users add rows etc in the database, the file has to grow again.
Growing a database file is an expensive operation, it takes time and it also hurts performance (lots of resource usage). Also, some modifications will be blocked until the grow operation has finished.
(Applies to shrinking of both data and log files.)
SQL Server 2005 and later:
As of SQL Server 2005, we have "instant file initialization" which means that database files can be created and also grow very fast since Windows doesn't "zero out" the data in the database file. Instant file initialization is only available for data files, not log files. Also, instance file initialization requires that the service account for the SQL Server service has the SE_MANAGE_VOLUME_NAME windows privilige, which can be assigned using the Perform Volume Maintenance Tasks security policy. This is by default only granted to Administrators. - There are situations where autogrow doesn't "catch up" with the space usage requirements.
This will result in an error message from SQL Server when the modification is performed, returned to the client application: error 1105 if data is full and 9002 if log is full.
(Applies to shrinking of both data and log files.) - Moving datapages around will fragment your database.
Say you rebuild your indexes (which will requires free space in the database), and then shrink the database. The shrink will essentially undo the index rebuild, leaving you with fragmented indexes. Don't believe me? This is easy to test for yourself.
What if you do it the other way around, shrink first, then rebuild? Well, the rebuld need free space in the database for the largest index that you rebuild, and it is likely you have a large table with a clustered index. A friend of mine had a 4GB used space db, where almost all space was one 4GB table. He did a shrink and then rebuild, where the re-build immediately "bumped up" the db size to 8GB.
(Applies to shrinking of data files.) - Heavy shrinking and growing of database files will fragment your file system, which will further hurt performance.
(Applies to shrinking of both data and log files.) - Repeatedly srinking and subsequent growing of transaction log files will typically result in many virtual log files which can cause long startup time for the database. This can manifest itself as long startup time for a database, long restore time, delays for transaction replication etc. Check out this blog post for more information.
Conclusion
In the end, only you can determine whether you want to shrink or not. With above information, you hopefully have enough to go on when making that decision. You probably know by now what I think of regular shrinking. Not to talk about autoshrink. :-)
Transact-SQL code
Below you find the T-SQL code I ran to prove that shrinking of a database will generate the same amount of transaction log records as the amount of data which was moved. (The script uses the 'NUL' filename as backup destination. This will "write" the backup data to the "bit bucket". I.e., the data isn't saved anywhere. This is very practical for testing but risking to state te obvious, do not use this backup destination for your production work!) --Script to show that shrink produces a lot of log record.
SET NOCOUNT ON
USE master
IF DB_ID('shrink_test') IS NOT NULL DROP DATABASE shrink_test
GO
CREATE DATABASE shrink_test
ON PRIMARY
(NAME = shrink_test_data, FILENAME = N'c:\shrink_test_data.mdf'
,SIZE = 5MB, MAXSIZE = 200MB, FILEGROWTH = 10%)
LOG ON
(NAME = shrink_test_log, FILENAME = N'c:\shrink_test_log.ldf'
,SIZE = 3MB, MAXSIZE = 200MB, FILEGROWTH = 10%)
GO
ALTER DATABASE shrink_test SET RECOVERY FULL
--Make sure the database isn't in auto-truncate mode for the log
BACKUP DATABASE shrink_test TO DISK = 'NUL'
USE shrink_test
CREATE TABLE t
(
c1 INT IDENTITY CONSTRAINT PK_shrink_test PRIMARY KEY NONCLUSTERED
,c2 CHAR(3000) DEFAULT 'hello'
)
DECLARE @i INT
SET @i = 1
WHILE @i <= 40000
BEGIN
INSERT INTO t DEFAULT VALUES
IF @i%500 = 0 --Truncate log on every 500'th row
BACKUP LOG shrink_test TO DISK = 'NUL'
SET @i = @i + 1
END
SELECT COUNT(c1) AS "Number of rows before delete, should be 40000"
FROM t
GO
--Delete some rows, in a loop so log doesn't grow!
DECLARE @i INT
SET @i = 1
WHILE @i <= 20000
BEGIN
DELETE FROM t WHERE c1 = @i
IF @i%500 = 0 --Truncate log on every 500'th row
BACKUP LOG shrink_test TO DISK = 'NUL'
SET @i = @i + 1
END
SELECT COUNT(c1) AS "Number of rows after delete, shuld be 20000"
FROM t
--Empty the log
BACKUP LOG shrink_test TO DISK = 'NUL'
--Database file should be large (160MG on my machine), logfile small (3MB)
SELECT name, size*8192/(1024*1024) AS sizeInMB FROM sysfiles
GO
--This shrink might now produce a lot of log record as 20000 rows will be moved!
CHECKPOINT
DBCC SHRINKFILE (shrink_test_data, 40)
--Database file should now be small, but logfile large
SELECT name, size*8192/(1024*1024) AS sizeInMB FROM shrink_test..sysfiles
--My result, the data file shrunk to 80MB and the log file grew from 3MB to 146MB!!!
USE master
GO
DROP DATABASE shrink_test