解决/lib64/libc.so.6: version `GLIBC_2.28‘ not found (required by

解决方案：升级glibc到2.28版本

wget  https://mirror.bjtu.edu.cn/gnu/libc/glibc-2.28.tar.xz

tar -xf glibc-2.28.tar.xz -C /usr/local/

cd /usr/local/glibc-2.28/

mkdir build

cd build/

../configure --prefix=/usr/local/glibc-2.28

运行到…/configure --prefix=/usr/local/glibc-2.28时报错

报错1：

configure: error: in `/root/test/glibc-2.28/build’:
configure: error: no acceptable C compiler found in $PATH

yum install gcc -y

报错2：

These critical programs are missing or too old: make
Check the INSTALL file for required versions.
解决方案： make太过老旧，参照下文升级make

报错3：
These critical programs are missing or too old: compiler
Check the INSTALL file for required versions.
解决方案：gcc版本太旧，参照下文升级gcc

centos 升级GCC编译器

yum -y install centos-release-scl

yum -y install devtoolset-8-gcc devtoolset-8-gcc-c++ devtoolset-8-binutils

scl enable devtoolset-8 bash

###yum安装完,原来的gcc不覆盖，需要执行enable脚本更新环境变量 
source /opt/rh/devtoolset-8/enable

###想保持覆盖，可将其写入~/.bashrc或/etc/profile
echo "source /opt/rh/devtoolset-8/enable" >>/etc/profile

###查看gcc版本
gcc -v

升级make

wget http://ftp.gnu.org/gnu/make/make-4.2.tar.gz

tar -xzvf make-4.2.tar.gz

cd make-4.2

sudo ./configure

sudo make

sudo make install

sudo rm -rf /usr/bin/make

sudo cp ./make /usr/bin/

make -v

升级glibc-2.28

wget  https://mirror.bjtu.edu.cn/gnu/libc/glibc-2.28.tar.xz

tar -xf glibc-2.28.tar.xz -C /usr/local

cd /usr/local/glibc-2.28/

mkdir build

cd build/

yum install -y bison

sudo ../configure --prefix=/usr --disable-profile --enable-add-ons --with-headers=/usr/include --with-binutils=/usr/bin

make  //make 运行时间较长，可能会有半小时

###如make没有运行成功，解决error后需要先运行make clean，清除之前make的内容，才能再次执行make
make clean

make

make install

通过strings /lib64/libc.so.6 |grep GLIBC查询是否存在glibc-2.28版本

strings /lib64/libc.so.6 |grep GLIBC

ref:

centos /lib64/libc.so.6: version ‘GLIBC_2.28’ not found (required by