部署gluster
部署环境
vmware15
ubuntu16.04 192.168.245.133 k8s-master gluster heketi
ubuntu16.04 192.168.245.134 k8s-node gluster
ubuntu16.04 192.168.245.135 k8s-node gluster
添加硬盘
添加额外存储
在vmware中选中虚拟机->编辑虚拟机设置->列表中选中硬盘->添加启动虚拟机后查看硬盘，多了一个5G的/dev/sdb盘
root@ubuntu:/usr/local/heketi/heketi# fdisk -l
Disk /dev/sdb: 5 GiB, 5368709120 bytes, 10485760 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
- 修改磁盘类型，选择gpt
root@ubuntu:/usr/local/heketi/heketi# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help):#依次输入g->w保存退出
- 查看/dev/sdb盘信息，发现磁盘类型变味了gpt
root@ubuntu:/usr/local/heketi/heketi# fdisk -l
Disk /dev/sdb: 5 GiB, 5368709120 bytes, 10485760 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D2003869-2A4C-47F4-B600-74E60998A0A1
- 为磁盘/dev/sdb分区，我们这里只分一个区
root@ubuntu:/usr/local/heketi/heketi# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): #依次输入n->一直按回车->w保存退出
- 查看分区信息，多了一个/dev/sdb1的物理卷
root@ubuntu:/usr/local/heketi/heketi# fdisk -l
Disk /dev/sdb: 5 GiB, 5368709120 bytes, 10485760 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D2003869-2A4C-47F4-B600-74E60998A0A1
Device Start End Sectors Size Type
/dev/sdb1 2048 10485726 10483679 5G Linux filesystem
gluster部署
- 所有节点安装gluster
apt-get install glusterfs-server glusterfs-common glusterfs-client fuse
systemctl start glusterfs-server
systemctl enable glusterfs-server
- 在133节点上添加节点
gluster peer probe 192.168.245.134
gluster peer probe 192.168.245.135
- 不用添加本地节点，添加本地节点会报错
root@ubuntu:/usr/local/heketi/heketi# gluster peer probe 192.168.245.133
peer probe: success. Probe on localhost not needed
heketi部署
- 下载heketi包
wget https://github.com/heketi/heketi/releases/download/v5.0.1/heketi-client-v5.0.1.linux.amd64.tar.gz
wget https://github.com/heketi/heketi/releases/download/v5.0.1/heketi-v5.0.1.linux.amd64.tar.gz
- 解压
tar -zxvf heketi-client-v5.0.1.linux.amd64.tar.gz
tar -zxvf heketi-v5.0.1.linux.amd64.tar.gz
- 修改配置文件heketi.json
"_port_comment": "Heketi Server Port Number",
"port": "18080",#修改端口
"_use_auth": "Enable JWT authorization. Please enable for deployment",
"use_auth": true,#修改auth
"_jwt": "Private keys for access",
"jwt": {
"_admin": "Admin has access to all APIs",
"admin": {
"key": "adminkey" #修改admin登录密码
},
"_user": "User only has access to /volumes endpoint",
"user": {
"key": "My Secret"
}
},
---
"executor": "ssh",# 修改登录方式
"_sshexec_comment": "SSH username and private key file information",
"sshexec": {
"keyfile": "/root/.ssh/id_rsa", #秘钥地址
"user": "root",# 登录用户
"port": "22",# 端口
"fstab": "/etc/fstab"# /etc/fstab文件负责配置Linux开机时自动挂载的分区
},
- 配置节点间的免密登录
ssh-keygen #生成公钥，然后将公钥互相copy到各自的authorized_keys文件中即可
向heketi中添加cluster、device
- 编辑配置文件topology-sample.json
{
"clusters": [
{
"nodes": [
{
"node": {
"hostnames": {
"manage": [
"192.168.245.133"
],
"storage": [
"192.168.245.133"
]
},
"zone": 1
},
"devices": [
"/dev/sdb1"
]
},
{
"node": {
"hostnames": {
"manage": [
"192.168.245.134"
],
"storage": [
"192.168.245.134"
]
},
"zone": 1
},
"devices": [
"/dev/sdb1"
]
},
{
"node": {
"hostnames": {
"manage": [
"192.168.245.135"
],
"storage": [
"192.168.245.135"
]
},
"zone": 1
},
"devices": [
"/dev/sdb1"
]
}
]
}
]
}
- 执行命令
root@ubuntu:/usr/local/heketi/heketi# ./heketi-cli --server "http://192.168.245.133:18080" --user "admin" --secret "adminkey" topology load --json topology-sample.json
Creating node 192.168.245.133 ... ID: 1204399251b630ccd34cd25c7c93a597
Adding device /dev/sdb1
Creating node 192.168.245.134 ... ID: a77370a6e9d5ee52de9cb71a27475d4a
Adding device /dev/sdb1 ... OK
Creating node 192.168.245.135 ... ID: 4668bb56bee757caaf6032638b9b8269
Adding device /dev/sdb1
- 查看cluster
root@ubuntu:/usr/local/heketi/heketi# ./heketi-cli --server "http://192.168.245.133:18080" --user "admin" --secret "adminkey" cluster list
Clusters:
Id:baf191bf97b91c6a8b8fad77e99c4ffc
- 查看node
root@ubuntu:/usr/local/heketi/heketi# ./heketi-cli --server "http://192.168.245.133:18080" --user "admin" --secret "adminkey" node list
Id:1204399251b630ccd34cd25c7c93a597 Cluster:baf191bf97b91c6a8b8fad77e99c4ffc
Id:4668bb56bee757caaf6032638b9b8269 Cluster:baf191bf97b91c6a8b8fad77e99c4ffc
Id:a77370a6e9d5ee52de9cb71a27475d4a Cluster:baf191bf97b91c6a8b8fad77e99c4ffc
k8s使用gluster
- 创建storageclass，storageclass-glusterfs.yaml
apiVersion: storage.k8s.io/v1beta1
kind: StorageClass
metadata:
name: glusterfs
provisioner: kubernetes.io/glusterfs #表示存储分配器，需要根据后端存储的不同而变更
parameters:
resturl: "http://192.168.245.133:18080" #heketi API服务提供的url
restauthenabled: "true" #可选参数，默认值为”false”，heketi服务开启认证时必须设置为”true”
restuser: "admin" #可选参数，开启认证时设置相应用户名；
restuserkey: "adminkey" #可选参数，开启认证时设置相应密码；
volumetype: "replicate:2" #可选参数，设置卷类型及其参数，如果未分配卷类型，则有分配器决定卷类型；如”volumetype: replicate:3”表示3副本的replicate卷，”volumetype: disperse:4:2”表示disperse卷，其中‘4’是数据，’2’是冗余校验，”volumetype: none”表示distribute卷
- 执行命令创建
kubectl apply -f storageclass-glusterfs.yaml
- 查看storageclass
root@ubuntu:/usr/local/heketi/heketi# kubectl get storageclass
NAME PROVISIONER AGE
glusterfs kubernetes.io/glusterfs 70m
- 创建pvc，glusterfs-pvc.yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: glusterfs-test
namespace: default
annotations:
volume.beta.kubernetes.io/storage-class: "glusterfs"
spec:
accessModes:
- ReadWriteMany
resources:
requests:
storage: 1Gi
- 执行命令创建
root@ubuntu:/usr/local/heketi/heketi# kubectl create -f glusterfs-pvc.yaml
persistentvolumeclaim/glusterfs-test created
- 查看pvc
状态为Bound说明创建成功
root@ubuntu:/usr/local/heketi/heketi# kubectl get pvc
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
glusterfs-test Bound pvc-f705938e-1bf9-11ea-b5d9-000c29509b70 1Gi RWX glusterfs 12s
- 查看pv
这里pv为动态创建的
root@ubuntu:/usr/local/heketi/heketi# kubectl get pv
NAME CAPACITY ACCESS MODES RECLAIM POLICY STATUS CLAIM STORAGECLASS REASON AGE
pvc-f705938e-1bf9-11ea-b5d9-000c29509b70 1Gi RWX Delete Bound default/glusterfs-test glusterfs 81s
问题
- heketi有些卷明明存在但是却删不了
直接删除heketi存储目录/var/lib/heketi/ 下的mounts/文件夹，然后> heketi.db 清空db文件，重新来 - Can't initialize physical volume "/dev/sdb1" of volume group "vg1" without –ff
这是因为没有卸载之前的vg和pv
使用命令vgremove,pvremove依次删除卷组，逻辑卷即可