HCL模拟器IRF配置

设备型号H3C S5820V2-54QS-GE
版本H3C Comware Software, Version 7.1.075, Alpha 7571
master设备

1.机器默认member 1，修改成员优先级

irf member 1 priority x

2.关闭IRF互联物理端口

int range  Ten-GigabitEthernet 1/0/49 to  Ten-GigabitEthernet 1/0/50
shutdown

3.创建IRF端口，并绑定互联物理端口

irf-port 1/1    
port group interface Ten-GigabitEthernet1/0/49 
port group interface Ten-GigabitEthernet1/0/50

4.开启物理端口unshutdown
5.保存配置save
6.重启设备reboot
7.激活irfirf-port-configuration active

slave设备

1.修改成员编号

irf member 1 renumber 2

2.保存重启生效
3.关闭IRF互联物理端口

int range  Ten-GigabitEthernet 1/0/49 to  Ten-GigabitEthernet 1/0/50
shutdown

4.创建IRF端口，并绑定互联物理端口

irf-port 2/2   
port group interface Ten-GigabitEthernet1/0/49 
port group interface Ten-GigabitEthernet1/0/50

5.开启物理端口unshutdown
6.保存配置save
7.重启设备reboot
8.激活irfirf-port-configuration active

BFD链路检测IRF心跳线配置

vlan 4000
interface Vlan-interface4000
 description **IRF_BFD**
 mad bfd enable
 mad ip address 1.1.1.1 255.255.255.252 member 1
 mad ip address 1.1.1.2 255.255.255.252 member 2
 
interface GigabitEthernet1/0/48
 port link-mode bridge
 port access vlan 4000
 undo stp enable
interface GigabitEthernet2/0/48
 port link-mode bridge
 port access vlan 4000
 undo stp enable

配置完成后连接心跳线

IRF常用命令

display irf    #显示IRF中所有成员设备的相关信息
display irf topology   #查看IRF的拓扑信息
display irf configuration   #显示本IRF中所有成员设备的预配置信息
display mad [verbose]   #显示MAD配置信息