Cisco综合实验

我这里都没有写enable和conf t这些要记得敲

switch0:
valn 101
valn 102
int f0/1
sw mode access
sw acess vlan 101
int f0/2
sw	mode access
sw access vlan 102

int range f0/23-24
sw mode trunk
sw trunk allowed vlan all

Multilay switch1:
ip routing
vlan 101
vlan 102
int vlan 101
ip add 192.168.1.1 255.255.255.0
int vlan 102
ip add 192.168.2.1 255.255.255.0
ip dhcp pool c10
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1 
dns-server 8.8.8.8
ip dhcp pool c20
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1 
dns-server 8.8.8.8
int rang f0/23-24
sw mode trunk
sw trunk allowed vlan all


链路聚合：
int port-channel 1
int rang f0/23-24
sw	trunk encap dot1q
sw	mode trunk
channel-group 1 mode on 

int g0/1
no sw
no shut 
ip add 192.168.10.1 255.255.255.0

开启pc的dhcp服务，左边就可以获取到ip地址了

Multilay switch2:
ip routing
int g0/2
sw trunk wn do
sw mode trunk
sw trunk allowed vlan all
int g0/1
no sw 
no shut
ip add 192.168.10.3 255.255.255.0

int  g0/2
sw trunk en do
sw mode trunk
sw trunk all vlan all

vlan 103
vlan 104
vlan 105
vlan 106
int vlan 103
ip add 192.168.3.1 255.255.255.0
int vlan 104
ip add 192.168.4.1 255.255.255.0
int vlan 105
ip add 192.168.5.1 255.255.255.0
int vlan 106
ip add 192.168.6.1 255.255.255.0
int vlan 103
ip helper-address 192.168.5.2
int vlan 104
ip helper-adress 192.168.5.2

access-list 1 deny 192.168.3.0 0.0.0.255
access-list 1 permit any
int vlan 106
ip access-group 1 out

access-list 101 deny icmp 192.168.1.0 0.0.0.255 eq www 192.168.5.2 255.255.255.0
access-list 101 permit icmp any any 
int vlan 105
ip access-group 101 in

server0:


server1:

server2

switch1:
vlan 103
vlan 104
vlan 105
vlan 106
int fa0/1
sw	mode access
sw access vlan 103
int fa0/2
sw	mode access
sw access vlan 104
int fa0/3
sw	mode access
sw access vlan 105
int fa0/4
sw	mode access
sw access vlan 106
int  g1/1
sw mode trunk
sw trunk allowed vlan all

打开pc的dhcp服务，就可以获取IP地址了

Multilay switch0:
ip routing
int f0/1
no shutdown

router0:
int f0/0
ip add 192.168.10.2 255.255.255.0
int s1/0
ip add 100.100.100.2	255.255.255.0

route rip
v 2
net 100.100.100.0

静态nat：
ip nat inside source static 192.168.6.2 100.100.100.3
动态nat：
ip nat pool isp 100.100.100.3 100.100.100.5 netmask 255.255.255.0
access-list 1 permit any
ip nat inside source list 1 pool isp overload
ip route 0.0.0.0  0.0.0.0 192.168.10.3 
int f0/0
ip nat inside
int s1/0 
ip nat outside

router1:
int s1/1
ip add 100.100.100.1 255.255.255.0
int f0/0
ip add 150.150.150.1 255.255.255.0
int s1/0
ip add  160.160.160.1 255.255.255.0

route rip
v 2
net 100.100.100.0
net 150.150.150.0
net 160.160.160.0
ip route 0.0.0.0  0.0.0.0 100.100.100.1

router2:
itn s1/0
ip add 160.160.160.2  255.255.255.0
int f0/0
ip add 200.200.200.1 255.255.255.0

route rip
v 2
net 160.160.160.0 
net 200.200.200.0

ip route 0.0.0.0  0.0.0.0 160.160.160.1

静态路由如下图
router0：

Multilay switch0:

Multilay switch1:

Multilay switch2:

结果：