mongodb replicateset 模式配置踩了的坑

懒得写config文件了，直接用命令行启动:

/path/to/mongod --dbpath=/path/to/db --fork --logpath=/path/to/log -port  --auth --replSet  --keyFile 

踩坑列表：

rs.initiate()->
errmsg: "replSetInitiate quorum check failed because not all proposed set members responded affirmatively: 
IP:PORT failed with not authorized on admin to execute command"

鉴权失败，以为两台机起的时候都有账号密码验证，要填账号密码，结果也不行。
看了下官方文档

openssl rand -base64 756 > 
chmod 400 

生成key，cp去两台机，启动时候指定--keyFile 就解决了

rs.initiate()->
errmsg: "IP:PORT has data already, cannot initiate set"

用来做从那台机已有数据，所以不能直接覆盖，好吧，偷了个懒直接scp把主的东东全cp过来了。全部删掉，包括admin这个db。重启。终于可以初始化了。包括主那台机的账号密码也会重新同步到从。

不算是坑

之前的版本有个master/slave模式。启动配置有点不同。
指定的master启动的时候是--master，指定的slave启动时候是--slave --source masterIP:port
效果应该差不多，-h里面建议用replicate set相关参数

Master/slave options (old; use replica sets instead):

然后

对于要做读写分离来提升体验的，当然是选择SECONDARY_PREFERRED
其他几种模式就字面意思了。如果机器多到爆炸倒是可以试试NEAREST，不知道是随机还是有做ping来优先选择rtt小的。

client = MongoClient(uri,replicaSet='SetName',readPreference='secondaryPreferred')
*   `PRIMARY`: Read from the primary. This is the default read preference, and provides the strongest consistency. If no primary is available, raise [`AutoReconnect`](http://api.mongodb.com/python/current/api/pymongo/errors.html#pymongo.errors.AutoReconnect "pymongo.errors.AutoReconnect").
*   `PRIMARY_PREFERRED`: Read from the primary if available, otherwise read from a secondary.
*   `SECONDARY`: Read from a secondary. If no matching secondary is available, raise [`AutoReconnect`](http://api.mongodb.com/python/current/api/pymongo/errors.html#pymongo.errors.AutoReconnect "pymongo.errors.AutoReconnect").
*   `SECONDARY_PREFERRED`: （选它!!!）Read from a secondary if available, otherwise from the primary.
*   `NEAREST`: Read from any available member.