free5gc环境搭建与测试

free5gc installation and test

• • Reference
  • Environment
  • Installation
  • • A. Pre-requisite
    • B. Install Control Plane Entities
    • C. Install User Plane Function(UPF)
  • Run
  • • A. Run Core Network
    • B. Run N3IWF(Individually)
  • Test

 

Reference

• github free5gc readme
• free5gc forum
• github free5gc wiki

Environment

Name	Version
OS	Ubuntu 18.04.4
Go	1.14.4 linux/amd64
kernel	5.0.0-23-generic(MUST for UPF

Installation

A. Pre-requisite

1. 需要内核版本5.0.0-23-generic,

   uname -r
   # 5.0.0-23-generic
   

   更换内核方法直接使用:

   sudo apt-get install linux-image-5.0.0-23-generic
   sudo apt-get install linux-headers-5.0.0-23-generic
   

2. Go language requirement

   • 如果存在安装的其他Go版本,
     • 卸载.
       • sudo rm -rf /usr/local/go
     • Install Go 1.14.4

       wget https://dl.google.com/go/go1.14.4.linux-amd64.tar.gz
       sudo tar -C /usr/local -zxvf go1.14.4.linux-amd64.tar.gz
       # 后面的配置和下面一样
       

   • 如果是第一次安装Go
     • Install Go 1.14.4

       wget https://dl.google.com/go/go1.14.4.linux-amd64.tar.gz
       sudo tar -C /usr/local -zxvf go1.14.4.linux-amd64.tar.gz
       mkdir -p ~/go/{bin,pkg,src}
       echo 'export GOPATH=$HOME/go' >> ~/.bashrc
       echo 'export GOROOT=/usr/local/go' >> ~/.bashrc
       echo 'export PATH=$PATH:$GOPATH/bin:$GOROOT/bin' >> ~/.bashrc
       source ~/.bashrc
       
       

3. Required packages for control plane 控制侧需要的依赖包

   sudo apt -y update
   sudo apt -y install mongodb wget git
   sudo systemctl start mongodb
   

4. Required packages for user plane 用户侧需要的依赖包

   sudo apt -y update
   sudo apt -y install git gcc cmake autoconf libtool pkg-config libmnl-dev libyaml-dev
   go get -u github.com/sirupsen/logrus
   

   这里遇到了一个问题, Go 下载模块的时候需要外网.
   
   解决办法–添加代理
   

B. Install Control Plane Entities

1. Clone free5GC project

   cd ~
   git clone --recursive -b v3.0.3 -j `nproc` https://github.com/free5gc/free5gc.git
   cd free5gc
   

   (Optional) If you want to use the nightly version, runs:

   cd ~/free5gc
   git checkout master
   git submodule sync
   git submodule update --init --jobs `nproc`
   git submodule foreach git checkout master
   git submodule foreach git pull --jobs `nproc`
   

2. Run the script to install dependent packages

   cd ~/free5gc
   go mod download
   

   不要改变任何文件名, In step 2, the folder name should remain free5gc.

3. Complie free5gc

   ./build.sh
   

C. Install User Plane Function(UPF)

UPF使用C编写，需要单独编译

1. Check the kernel version

   uname -r
   
   

   Get linux kernel module 5G GTP-U

   git clone -b v0.1.0 https://github.com/PrinzOwO/gtp5g.git
   cd gtp5g
   make
   sudo make install
   

2. Build from sources

   cd ~/free5gc/src/upf
   mkdir build
   cd build
   cmake ..
   make -j`nproc`
   

   Note: UPF’s config is located at
   free5gc/src/upf/build/config/ufcfg.yaml

Run

A. Run Core Network

• Option 1. Run network function service individually, e.g. AMF(redo this for
  each NF)

  cd ~/free5gc
  ./bin/amf
  

  Note For N3IWF needs specific configuration in section B

• Option 2. Run whole core network with command

  ./run.sh
  

  运行结果图如下
  

B. Run N3IWF(Individually)

TODO

Test

cd ~/free5gc
chmod +x ./test.sh

• a. TestRegistration

  (in directory: ~/free5gc)
  ./test.sh TestRegistration
  

  测试的时候遇到如下问题
  

• b. TestServiceRequest

  ./test.sh TestServiceRequest
  

• c. Other test
  TODO