MTK Camera HAL到驱动的流程总结一

MTK Camera HAL到驱动的流程总结一_第1张图片

和你一起终身学习,这里是程序员Android

经典好文推荐,通过阅读本文,您将收获以下知识点:

一、架构介绍
二、Camera Open流程(Hal-Sensor)
三、Sensor Search流程

一、架构介绍

1.1 Camera的框架分为Kernel部分和Hal部分

Kernel部分:

image sensor driver——负责具体型号的sensor的id检测,上电,以及在preview、capture、初始化、3A等等功能设定时的寄存器配置;
ISP driver——通过DMA将sensor数据流上传;
Hal部分:

imageio——主要负责数据buffer上传的pipe;
drv——包含imgsensor和isp的hal层控制;
feature io——包含各种3A等性能配置;
来看一张图,大致来了解一下Camera的整体架构。

outside_default.png

1.2 MiddleWare(MW)层

ICameraProvider——向上暴露的接口调用,实现是在CameraProvider中;
[email protected]——用于Camera Service去操作各个Camera device的操作,实现在CameraDevice3中;
[email protected]——Camera会话的接口;
ICameraDeviceCallBack——底层对上层的CallBack接口;
CameraDeviceManager——用于管理CameraDevice,包括查找,打开,关闭等。

1.3 Pipeline介绍

PipelineModel是HAL3核心架构,对上需要开放对Pipeline创建 / 操作的API,对下需要建立Pipeline / 管理Pipeline的生命周期。
PipelineModel会针对不同的场景创建不同的Pipeline和HWNode,HWNode向下传输APP层的命令,向上传递图形数据。

P1Node——pipeline的root node,input app命令,output raw data to P2CaptureNode and P2StreamNode;
P2CaptureNode——转换raw data to yuv,Support scale/crop;
P2StreamingNode——和P2CaptureNode功能类似;
JPEGNode——Convert YUV to Jpeg;
FDNode——Generate the FD information;

二、Camera Open流程(Hal-Sensor)

在APP层调用openCamera后会调用的CameraDevice层,最后调用到driver中,整体的调用流程如下:

outside_default.png

先从CameraDevice3SessionImpl的open函数分析。

//vendor/mediatek/proprietary/hardware/mtkcam3/main/hal/device/3.x/device/CameraDevice3SessionImpl.cppauto ThisNamespace::open(
    const ::android::sp& callback) -> ::android::status_t{
    auto pDeviceManager = mStaticInfo.mDeviceManager;
    auto const& instanceName = mStaticInfo.mStaticDeviceInfo->mInstanceName;
     
    status = pDeviceManager->startOpenDevice(instanceName);
     
    err = onOpenLocked(callback);
    pDeviceManager->updatePowerOnDone();
    status = pDeviceManager->finishOpenDevice(instanceName, false/*cancel*/);}
     auto ThisNamespace::onOpenLocked(
    const ::android::sp& callback) -> ::android::status_t{
    //--------------------------------------------------------------------------
    {
        Mutex::Autolock _l(mPipelineModelLock);
        auto pPipelineModelMgr = IPipelineModelManager::get();
        auto pPipelineModel = pPipelineModelMgr->getPipelineModel( getInstanceId() );
        ::android::status_t err = OK;
        err = pPipelineModel->open(getInstanceName().c_str(), this);
        mPipelineModel = pPipelineModel;
    }
    //--------------------------------------------------------------------------
    return OK;}

//vendor/mediatek/proprietary/hardware/mtkcam3/pipeline/model/PipelineModelImpl.cpp

auto PipelineModelImpl::open(
    std::string const& userName,
    android::wp const& callback) -> int{
    {
        std::lock_guard _l(mLock);
        mUserName = userName;
        mCallback = callback;
        mvOpenFutures.push_back(
            std::async(std::launch::async,
                [this]() {
                    return CC_LIKELY( mHalDeviceAdapter!=nullptr )
                        && CC_LIKELY( mHalDeviceAdapter->open() ) 
                        //android::sp const    mHalDeviceAdapter;
                        && CC_LIKELY( mHalDeviceAdapter->powerOn() );
                }
            )
        ); 
    }
    return OK;}

调用mHalDeviceAdapter的open用于初始化DeviceAdapter,这里重点看powerOn函数,这里的powerOn有另起一个线程去操作sensor,等待sensor上电完成后对3A进行powerOn操作。

//vendor/mediatek/proprietary/hardware/mtkcam3/pipeline/model/adapter/HalDeviceAdapter.cpp

virtual auto powerOn() -> bool override{
    //1.调用HalSensor的powerOn
    std::future future_initSensor =
        std::async(std::launch::async,
            [ this ]() {
                    if (CC_UNLIKELY( !mvHalSensor[i]->powerOn(mName.c_str(), 1, &sensorIndex) ))
        }
     
    //2.init 3A and poweron 3A
    bool success_sensorPowerOn = false;
    bool success_init3A = true;
    for (size_t i = 0; i < mvPhySensorId.size(); i++)
    {
        mvHal3A.push_back(IHal3AAdapter::create(mvPhySensorId[i], mName.c_str()));
        mvHalIsp.push_back(MAKE_HalISP(mvPhySensorId[i], mName.c_str()));
    }
     
    //3.Wait for Sensor PowerOn
    {
        success_sensorPowerOn = future_initSensor.get();
        if  ( ! success_sensorPowerOn ) {
            return false;
        }
    }
        
    //4.Notify 3A of Power On
    for (size_t i = 0; i < mvHal3A.size(); i++){
       if (mvHal3A[i] != nullptr){
           mvHal3A[i]->notifyPowerOn();
        }
    }}

这里继续跟踪mvHalSensor[i]->powerOn,会调用到HalSensor.cpp中,这里到了和Driver交互的部分:

初始化SeninfDrv和SensorDrv;
setSensorMclk和setSensorMclkDrivingCurrent;
最后通过mpSensorDrv->open;
//vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/HalSensor.cpp

MBOOL HalSensor:: powerOn(){
     
    mpSeninfDrv->init();
    mpSensorDrv->init();
    for (MUINT i = 0; i < uCountOfIndex; i++)
    {
        setSensorMclk(sensorIdx, 1)
        setSensorMclkDrivingCurrent(sensorIdx)
     
        // Open sensor, try to open 3 time
        for (int i =0; i < 3; i++) {
            if ((ret = mpSensorDrv->open(sensorIdx)) != SENSOR_NO_ERROR) {
                MY_LOGE("pSensorDrv->open fail, retry = %d ", i);
            }
        }
    }}

接下来会调用到imgsensor_drv的open函数,到此featureControl调用到驱动的SENSOR_FEATURE_OPEN。

//vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/imgsensor_drv.cpp

MINT32
ImgSensorDrv::open(IMGSENSOR_SENSOR_IDX sensorIdx){
    MUINT32                           featureParaLen = sizeof(MUINT32);
    MUINT32                           featurePara;

    return featureControl(sensorIdx, SENSOR_FEATURE_OPEN, (MUINT8 *)&featurePara, &featureParaLen);}MINT32  ImgSensorDrv::featureControl(
    IMGSENSOR_SENSOR_IDX sensorIdx,
    ACDK_SENSOR_FEATURE_ENUM FeatureId,
    MUINT8 *pFeaturePara,
    MUINT32 *pFeatureParaLen){

    ACDK_SENSOR_FEATURECONTROL_STRUCT featureCtrl;
    
    //结构ACDK_SENSOR_FEATURECONTROL_STRUCT和kernel中一致
    featureCtrl.InvokeCamera = sensorIdx;
    featureCtrl.FeatureId = FeatureId;//SENSOR_FEATURE_SET_DRIVER
    featureCtrl.pFeaturePara = pFeaturePara;
    featureCtrl.pFeatureParaLen = pFeatureParaLen;
        
    if (ioctl(m_fdSensor, KDIMGSENSORIOC_X_FEATURECONCTROL , &featureCtrl) < 0) {
        LOG_ERR("[featureControl] Err-ctrlCode (%s)", strerror(errno));
        return -errno;
    }
    
    return SENSOR_NO_ERROR;}

三、Sensor Search流程

CameraService是在开机时启动的,启动后进行searchSensor的操作,会search系统有多少camera,开机时的search操作,只进行camera支持数量的遍历,以及sensor ID的读取操作。

HalSensorList:
vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/HalSensorList.enumList.cpp
vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/HalSensorList.cpp

SeninfDrv:
vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/mt6765/seninf_drv.cpp

SensorDrv:
vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/imgsensor_drv.cpp

outside_default.png

//vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/HalSensorList.cpp

MUINT
HalSensorList::searchSensors(){
    Mutex::Autolock _l(mEnumSensorMutex);

    MY_LOGD("searchSensors");
    return  enumerateSensor_Locked();}MUINT
HalSensorList::queryNumberOfSensors() const{
    Mutex::Autolock _l(mEnumSensorMutex);

    return  mEnumSensorList.size();}IMetadata const&HalSensorList::queryStaticInfo(MUINT const index) const{
    EnumInfo const* pInfo = queryEnumInfoByIndex(index);
    MY_LOGF_IF(pInfo==NULL, "NULL EnumInfo for sensor %d", index);

    return  pInfo->mMetadata;}

searchSensors()会调用enumerateSensor_Locked()。

//vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/HalSensorList.enumList.cpp

MUINT HalSensorList::enumerateSensor_Locked(){
    SensorDrv *const pSensorDrv = SensorDrv::get();
    SeninfDrv *const pSeninfDrv = SeninfDrv::createInstance();
    //初始化seninf,配置ISP相关内容
    pSeninfDrv->init();
     
    //将所有的clk全部打开
    pSeninfDrv->setAllMclkOnOff(ISP_DRIVING_8MA, TRUE);
        
    pSensorDrv->init();
    for (MUINT i = IMGSENSOR_SENSOR_IDX_MIN_NUM; i <= max_index_of_camera; i++) {
        if((ret = pSensorDrv->searchSensor((IMGSENSOR_SENSOR_IDX)i)) == SENSOR_NO_ERROR){
            //query sensorinfo
           querySensorDrvInfo((IMGSENSOR_SENSOR_IDX)i);
           //fill in metadata
           buildSensorMetadata((IMGSENSOR_SENSOR_IDX)i);
           pSensorInfo = pSensorDrv->getSensorInfo((IMGSENSOR_SENSOR_IDX)i);
           addAndInitSensorEnumInfo_Locked(
                (IMGSENSOR_SENSOR_IDX)i,
                mapToSensorType(pSensorInfo->GetType()),
                pSensorInfo->getDrvMacroName());
        }
    }     }

下面看下pSensorDrv->getSensorInfo的流程,这里有去获取sensorList的内容。

//vendor/mediatek/proprietary/hardware/mtkcam/drv/src/sensor/common/v1/imgsensor_drv.cpp

MINT32 ImgSensorDrv::searchSensor(IMGSENSOR_SENSOR_IDX sensorIdx){
    GetSensorInitFuncList(&pSensorInitFunc);
     
    featureControl(sensorIdx, SENSOR_FEATURE_SET_DRIVER, (MUINT8 *)&idx, &featureParaLen);
     
    NSFeature::SensorInfoBase* pSensorInfo = pSensorInitFunc[idx].pSensorInfo;}

(A)GetSensorInitFuncList是获取到配置的sensorList的内容,此sensorList需要与kernel层配置的一致,不一致的话在打开camera时会出现异常。

//vendor/mediatek/proprietary/custom/mtxxxx/hal/imgsensor_src/sensorlist.cpp

MSDK_SENSOR_INIT_FUNCTION_STRUCT SensorList[] ={/*IMX*/#if defined(IMX586_MIPI_RAW)
    RAW_INFO_M(IMX586_SENSOR_ID, DEFAULT_MODULE_INDEX, DEFAULT_MODULE_ID, SENSOR_DRVNAME_IMX586_MIPI_RAW, CAM_CALGetCalData),#endif#if defined(IMX519_MIPI_RAW)
    RAW_INFO_M(IMX519_SENSOR_ID, DEFAULT_MODULE_INDEX, DEFAULT_MODULE_ID, SENSOR_DRVNAME_IMX519_MIPI_RAW, CAM_CALGetCalData),#endif//...};UINT32 GetSensorInitFuncList(MSDK_SENSOR_INIT_FUNCTION_STRUCT **ppSensorList){
    if (NULL == ppSensorList) {
        ALOGE("ERROR: NULL pSensorList\n");
        return MHAL_UNKNOWN_ERROR;
    }
    *ppSensorList = &SensorList[0];
    return MHAL_NO_ERROR;}

(B)featureControl的setDriver流程同上面的一致。

原文链接:https://blog.csdn.net/dongxianfei/article/details/121382327

友情推荐:

Android 开发干货集锦

至此,本篇已结束。转载网络的文章,小编觉得很优秀,欢迎点击阅读原文,支持原创作者,如有侵权,恳请联系小编删除,欢迎您的建议与指正。同时期待您的关注,感谢您的阅读,谢谢!

MTK Camera HAL到驱动的流程总结一_第2张图片

点击阅读原文,为大佬点赞!

你可能感兴趣的:(网络,android,java,c++,python)