LINUX--team的配置

Team的配置
1.先添加两张网卡：


点击添加

重复一次以添加两张网卡
可以用“ip a”命令查看添加状况

2.激活真实网卡
命令：
[dzy@localhost ~]$ nmcli device connect ens192
[dzy@localhost ~]$ nmcli device connect ens224

3.添加虚拟网卡team0（主设备）
[dzy@localhost ~]$ nmcli connection add type team con-name team0 ifname team0 config ‘{“runner”: {“name”: “activebackup”}}’
[dzy@localhost ~]$ nmcli connection show
#修改team0会话的IP地址和网关
[dzy@localhost ~]$ nmcli connection modify team0 ipv4.addresses
192.168.171.150/24
[dzy@localhost ~]$ nmcli connection modify team0 ipv4.gateway 192.168.171.1
#更改IP地址获取方式为手动
[dzy@localhost ~]$ nmcli connection modify team0 ipv4.method manual
#查看修改后的team0会话
[dzy@localhost ~]$ nmcli connection show team0 | grep method

4.虚拟网卡绑定真实网卡（从设备）
[dzy@localhost ~]$ nmcli connection add type team-slave con-name team0-port1
ifname eno33554984 master team0
[dzy@localhost ~]$ nmcli connection add type team-slave con-name team0-port2
ifname eno50332208 master team0

5.添加设备（先激活从会话，再激活主会话）
[dzy@localhost ~]$ nmcli connection up team0-port1
[dzy@localhost ~]$ nmcli connection up team0-port2
[root@localhost ~]# nmcli connection up team0

6.查看启动后的team0状态
[root@localhost ~]# teamdctl team0 state

结束