SQLException错误码

这里说的错误码是指SQLException.getErrorCode()返回的int类型错误码。

比如常见的有：

// 1049 Unknown database 
// 1060 Duplicate column name
// 1061 Duplicate key name 
// 1091 Can't DROP 'xxx'. Check that column/key exists

以下错误码，摘抄自mysql jdbc驱动中的MysqlErrorNumbers类。

int ER_ERROR_MESSAGES = 298;
int ER_HASHCHK = 1000; //SQLSTATE: HY000 Message: hashchk
int ER_NISAMCHK = 1001; //SQLSTATE: HY000 Message: isamchk
int ER_NO = 1002; //SQLSTATE: HY000 Message: NO; Used in the construction of other messages.
int ER_YES = 1003; //SQLSTATE: HY000 Message: YES
int ER_CANT_CREATE_FILE = 1004; //SQLSTATE: HY000 Message: Can't create file '%s' (errno: %d - %s)
int ER_CANT_CREATE_TABLE = 1005; //SQLSTATE: HY000 Message: Can't create table '%s' (errno: %d)
int ER_CANT_CREATE_DB = 1006; //SQLSTATE: HY000 Message: Can't create database '%s' (errno: %d)
int ER_DB_CREATE_EXISTS = 1007; //SQLSTATE: HY000 Message: Can't create database '%s'; database exists...
int ER_DB_DROP_EXISTS = 1008; //SQLSTATE: HY000 Message: Can't drop database '%s'; database doesn't exist
int ER_DB_DROP_DELETE = 1009; //SQLSTATE: HY000 Message: Error dropping database (can't delete '%s', errno: %d)
int ER_DB_DROP_RMDIR = 1010; //SQLSTATE: HY000 Message: Error dropping database (can't rmdir '%s', errno: %d)
int ER_CANT_DELETE_FILE = 1011; //SQLSTATE: HY000 Message: Error on delete of '%s' (errno: %d - %s)
int ER_CANT_FIND_SYSTEM_REC = 1012; //SQLSTATE: HY000 Message: Can't read record in system table
int ER_CANT_GET_STAT = 1013; //SQLSTATE: HY000 Message: Can't get status of '%s' (errno: %d - %s)
int ER_CANT_GET_WD = 1014; //SQLSTATE: HY000 Message: Can't get working directory (errno: %d - %s)
int ER_CANT_LOCK = 1015; //SQLSTATE: HY000 Message: Can't lock file (errno: %d - %s)
int ER_CANT_OPEN_FILE = 1016; //SQLSTATE: HY000 Message: Can't open file: '%s' (errno: %d - %s)
int ER_FILE_NOT_FOUND = 1017; //SQLSTATE: HY000 Message: Can't find file: '%s' (errno: %d - %s)
int ER_CANT_READ_DIR = 1018; //SQLSTATE: HY000 Message: Can't read dir of '%s' (errno: %d - %s)
int ER_CANT_SET_WD = 1019; //SQLSTATE: HY000 Message: Can't change dir to '%s' (errno: %d - %s)
int ER_CHECKREAD = 1020; //SQLSTATE: HY000 Message: Record has changed since last read in table '%s'
int ER_DISK_FULL = 1021; //SQLSTATE: HY000 Message: Disk full (%s); waiting for someone to free some space... (errno: %d - %s)
int ER_DUP_KEY = 1022; //SQLSTATE: 23000 Message: Can't write; duplicate key in table '%s'
int ER_ERROR_ON_CLOSE = 1023; //SQLSTATE: HY000 Message: Error on close of '%s' (errno: %d - %s)
int ER_ERROR_ON_READ = 1024; //SQLSTATE: HY000 Message: Error reading file '%s' (errno: %d - %s)
int ER_ERROR_ON_RENAME = 1025; //SQLSTATE: HY000 Message: Error on rename of '%s' to '%s' (errno: %d - %s)
int ER_ERROR_ON_WRITE = 1026; //SQLSTATE: HY000 Message: Error writing file '%s' (errno: %d - %s)
int ER_FILE_USED = 1027; //SQLSTATE: HY000 Message: '%s' is locked against change
int ER_FILSORT_ABORT = 1028; //SQLSTATE: HY000 Message: Sort aborted
int ER_FORM_NOT_FOUND = 1029; //SQLSTATE: HY000 Message: View '%s' doesn't exist for '%s'
int ER_GET_ERRNO = 1030; //SQLSTATE: HY000 Message: Got error %d from storage engine...
int ER_ILLEGAL_HA = 1031; //SQLSTATE: HY000 Message: Table storage engine for '%s' doesn't have this option
int ER_KEY_NOT_FOUND = 1032; //SQLSTATE: HY000 Message: Can't find record in '%s'
int ER_NOT_FORM_FILE = 1033; //SQLSTATE: HY000 Message: Incorrect information in file: '%s'
int ER_NOT_KEYFILE = 1034; //SQLSTATE: HY000 Message: Incorrect key file for table '%s'; try to repair it
int ER_OLD_KEYFILE = 1035; //SQLSTATE: HY000 Message: Old key file for table '%s'; repair it!
int ER_OPEN_AS_READONLY = 1036; //SQLSTATE: HY000 Message: Table '%s' is read only
int ER_OUTOFMEMORY = 1037; //SQLSTATE: HY001 Message: Out of memory; restart server and try again (needed %d bytes)
int ER_OUT_OF_SORTMEMORY = 1038; //SQLSTATE: HY001 Message: Out of sort memory, consider increasing server sort buffer size
int ER_UNEXPECTED_EOF = 1039; //SQLSTATE: HY000 Message: Unexpected EOF found when reading file '%s' (errno: %d - %s)
int ER_CON_COUNT_ERROR = 1040; //SQLSTATE: 08004 Message: Too many connections
int ER_OUT_OF_RESOURCES = 1041; //SQLSTATE: HY000 Message: Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space
int ER_BAD_HOST_ERROR = 1042; //SQLSTATE: 08S01 Message: Can't get hostname for your address
int ER_HANDSHAKE_ERROR = 1043; //SQLSTATE: 08S01 Message: Bad handshake
int ER_DBACCESS_DENIED_ERROR = 1044; //SQLSTATE: 42000 Message: Access denied for user '%s'@'%s' to database '%s'
int ER_ACCESS_DENIED_ERROR = 1045; //SQLSTATE: 28000 Message: Access denied for user '%s'@'%s' (using password: %s)
int ER_NO_DB_ERROR = 1046; //SQLSTATE: 3D000 Message: No database selected
int ER_UNKNOWN_COM_ERROR = 1047; //SQLSTATE: 08S01 Message: Unknown command
int ER_BAD_NULL_ERROR = 1048; //SQLSTATE: 23000 Message: Column '%s' cannot be null
int ER_BAD_DB_ERROR = 1049; //SQLSTATE: 42000 Message: Unknown database '%s'
int ER_TABLE_EXISTS_ERROR = 1050; //SQLSTATE: 42S01 Message: Table '%s' already exists
int ER_BAD_TABLE_ERROR = 1051; //SQLSTATE: 42S02 Message: Unknown table '%s'
int ER_NON_UNIQ_ERROR = 1052; //SQLSTATE: 23000 Message: Column '%s' in %s is ambiguous
int ER_SERVER_SHUTDOWN = 1053; //SQLSTATE: 08S01 Message: Server shutdown in progress
int ER_BAD_FIELD_ERROR = 1054; //SQLSTATE: 42S22 Message: Unknown column '%s' in '%s'
int ER_WRONG_FIELD_WITH_GROUP = 1055; //SQLSTATE: 42000 Message: '%s' isn't in GROUP BY
int ER_WRONG_GROUP_FIELD = 1056; //SQLSTATE: 42000 Message: Can't group on '%s'
int ER_WRONG_SUM_SELECT = 1057; //SQLSTATE: 42000 Message: Statement has sum functions and columns in same statement
int ER_WRONG_VALUE_COUNT = 1058; //SQLSTATE: 21S01 Message: Column count doesn't match value count
int ER_TOO_LONG_IDENT = 1059; //SQLSTATE: 42000 Message: Identifier name '%s' is too long
int ER_DUP_FIELDNAME = 1060; //SQLSTATE: 42S21 Message: Duplicate column name '%s'
int ER_DUP_KEYNAME = 1061; //SQLSTATE: 42000 Message: Duplicate key name '%s'
int ER_DUP_ENTRY = 1062; //SQLSTATE: 23000 Message: Duplicate entry '%s' for key %d
int ER_WRONG_FIELD_SPEC = 1063; //SQLSTATE: 42000 Message: Incorrect column specifier for column '%s'
int ER_PARSE_ERROR = 1064; //SQLSTATE: 42000 Message: %s near '%s' at line %d
int ER_EMPTY_QUERY = 1065; //SQLSTATE: 42000 Message: Query was empty
int ER_NONUNIQ_TABLE = 1066; //SQLSTATE: 42000 Message: Not unique table/alias: '%s'
int ER_INVALID_DEFAULT = 1067; //SQLSTATE: 42000 Message: Invalid default value for '%s'
int ER_MULTIPLE_PRI_KEY = 1068; //SQLSTATE: 42000 Message: Multiple primary key defined
int ER_TOO_MANY_KEYS = 1069; //SQLSTATE: 42000 Message: Too many keys specified; max %d keys allowed
int ER_TOO_MANY_KEY_PARTS = 1070; //SQLSTATE: 42000 Message: Too many key parts specified; max %d parts allowed
int ER_TOO_LONG_KEY = 1071; //SQLSTATE: 42000 Message: Specified key was too long; max key length is %d bytes
int ER_KEY_COLUMN_DOES_NOT_EXITS = 1072; //SQLSTATE: 42000 Message: Key column '%s' doesn't exist in table
int ER_BLOB_USED_AS_KEY = 1073; //SQLSTATE: 42000 Message: BLOB column '%s' can't be used in key specification with the used table type
int ER_TOO_BIG_FIELDLENGTH = 1074; //SQLSTATE: 42000 Message: Column length too big for column '%s' (max = %lu); use BLOB or TEXT instead
int ER_WRONG_AUTO_KEY = 1075; //SQLSTATE: 42000 Message: Incorrect table definition; there can be only one auto column and it must be defined as a key
int ER_READY = 1076; //SQLSTATE: HY000 Message: %s: ready for connections. Version: '%s' socket: '%s' port: %d
int ER_NORMAL_SHUTDOWN = 1077; //SQLSTATE: HY000 Message: %s: Normal shutdown
int ER_GOT_SIGNAL = 1078; //SQLSTATE: HY000 Message: %s: Got signal %d. Aborting!
int ER_SHUTDOWN_COMPLETE = 1079; //SQLSTATE: HY000 Message: %s: Shutdown complete
int ER_FORCING_CLOSE = 1080; //SQLSTATE: 08S01 Message: %s: Forcing close of thread %ld user: '%s'
int ER_IPSOCK_ERROR = 1081; //SQLSTATE: 08S01 Message: Can't create IP socket
int ER_NO_SUCH_INDEX = 1082; //SQLSTATE: 42S12 Message: Table '%s' has no index like the one used in CREATE INDEX; recreate the table
int ER_WRONG_FIELD_TERMINATORS = 1083; //SQLSTATE: 42000 Message: Field separator argument is not what is expected; check the manual
int ER_BLOBS_AND_NO_TERMINATED = 1084; //SQLSTATE: 42000 Message: You can't use fixed rowlength with BLOBs; please use 'fields terminated by'
int ER_TEXTFILE_NOT_READABLE = 1085; //SQLSTATE: HY000 Message: The file '%s' must be in the database directory or be readable by all
int ER_FILE_EXISTS_ERROR = 1086; //SQLSTATE: HY000 Message: File '%s' already exists
int ER_LOAD_INFO = 1087; //SQLSTATE: HY000 Message: Records: %ld Deleted: %ld Skipped: %ld Warnings: %ld
int ER_ALTER_INFO = 1088; //SQLSTATE: HY000 Message: Records: %ld Duplicates: %ld
int ER_WRONG_SUB_KEY = 1089; //SQLSTATE: HY000 Message: Incorrect prefix key; the used key part isn't a string, the used length is longer than the key part, or the storage engine doesn't support unique prefix keys
int ER_CANT_REMOVE_ALL_FIELDS = 1090; //SQLSTATE: 42000 Message: You can't delete all columns with ALTER TABLE; use DROP TABLE instead
int ER_CANT_DROP_FIELD_OR_KEY = 1091; //SQLSTATE: 42000 Message: Can't DROP '%s'; check that column/key exists
int ER_INSERT_INFO = 1092; //SQLSTATE: HY000 Message: Records: %ld Duplicates: %ld Warnings: %ld
int ER_UPDATE_TABLE_USED = 1093; //SQLSTATE: HY000 Message: You can't specify target table '%s' for update in FROM clause
int ER_NO_SUCH_THREAD = 1094; //SQLSTATE: HY000 Message: Unknown thread id: %lu
int ER_KILL_DENIED_ERROR = 1095; //SQLSTATE: HY000 Message: You are not owner of thread %lu
int ER_NO_TABLES_USED = 1096; //SQLSTATE: HY000 Message: No tables used
int ER_TOO_BIG_SET = 1097; //SQLSTATE: HY000 Message: Too many strings for column %s and SET
int ER_NO_UNIQUE_LOGFILE = 1098; //SQLSTATE: HY000 Message: Can't generate a unique log-filename %s.(1-999)
int ER_TABLE_NOT_LOCKED_FOR_WRITE = 1099; //SQLSTATE: HY000 Message: Table '%s' was locked with a READ lock and can't be updated
int ER_TABLE_NOT_LOCKED = 1100; //SQLSTATE: HY000 Message: Table '%s' was not locked with LOCK TABLES
int ER_BLOB_CANT_HAVE_DEFAULT = 1101; //SQLSTATE: 42000 Message: BLOB/TEXT column '%s' can't have a default value
int ER_WRONG_DB_NAME = 1102; //SQLSTATE: 42000 Message: Incorrect database name '%s'
int ER_WRONG_TABLE_NAME = 1103; //SQLSTATE: 42000 Message: Incorrect table name '%s'
int ER_TOO_BIG_SELECT = 1104; //SQLSTATE: 42000 Message: The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay
int ER_UNKNOWN_ERROR = 1105; //SQLSTATE: HY000 Message: Unknown error
int ER_UNKNOWN_PROCEDURE = 1106; //SQLSTATE: 42000 Message: Unknown procedure '%s'
int ER_WRONG_PARAMCOUNT_TO_PROCEDURE = 1107; //SQLSTATE: 42000 Message: Incorrect parameter count to procedure '%s'
int ER_WRONG_PARAMETERS_TO_PROCEDURE = 1108; //SQLSTATE: HY000 Message: Incorrect parameters to procedure '%s'
int ER_UNKNOWN_TABLE = 1109; //SQLSTATE: 42S02 Message: Unknown table '%s' in %s
int ER_FIELD_SPECIFIED_TWICE = 1110; //SQLSTATE: 42000 Message: Column '%s' specified twice
int ER_INVALID_GROUP_FUNC_USE = 1111; //SQLSTATE: HY000 Message: Invalid use of group function
int ER_UNSUPPORTED_EXTENSION = 1112; //SQLSTATE: 42000 Message: Table '%s' uses an extension that doesn't exist in this MySQL version
int ER_TABLE_MUST_HAVE_COLUMNS = 1113; //SQLSTATE: 42000 Message: A table must have at least 1 column
int ER_RECORD_FILE_FULL = 1114; //SQLSTATE: HY000 Message: The table '%s' is full
int ER_UNKNOWN_CHARACTER_SET = 1115; //SQLSTATE: 42000 Message: Unknown character set: '%s'
int ER_TOO_MANY_TABLES = 1116; //SQLSTATE: HY000 Message: Too many tables; MySQL can only use %d tables in a join
int ER_TOO_MANY_FIELDS = 1117; //SQLSTATE: HY000 Message: Too many columns
int ER_TOO_BIG_ROWSIZE = 1118; //SQLSTATE: 42000 Message: Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. This includes storage overhead, check the manual. You have to change some columns to TEXT or BLOBs
int ER_STACK_OVERRUN = 1119; //SQLSTATE: HY000 Message: Thread stack overrun: Used: %ld of a %ld stack. Use 'mysqld --thread_stack=#' to specify a bigger stack if needed
int ER_WRONG_OUTER_JOIN = 1120; //SQLSTATE: 42000 Message: Cross dependency found in OUTER JOIN; examine your ON conditions
int ER_NULL_COLUMN_IN_INDEX = 1121; //SQLSTATE: 42000 Message: Table handler doesn't support NULL in given index. Please change column '%s' to be NOT NULL or use another handler
int ER_CANT_FIND_UDF = 1122; //SQLSTATE: HY000 Message: Can't load function '%s'
int ER_CANT_INITIALIZE_UDF = 1123; //SQLSTATE: HY000 Message: Can't initialize function '%s'; %s
int ER_UDF_NO_PATHS = 1124; //SQLSTATE: HY000 Message: No paths allowed for shared library
int ER_UDF_EXISTS = 1125; //SQLSTATE: HY000 Message: Function '%s' already exists
int ER_CANT_OPEN_LIBRARY = 1126; //SQLSTATE: HY000 Message: Can't open shared library '%s' (errno: %d %s)
int ER_CANT_FIND_DL_ENTRY = 1127; //SQLSTATE: HY000 Message: Can't find symbol '%s' in library
int ER_FUNCTION_NOT_DEFINED = 1128; //SQLSTATE: HY000 Message: Function '%s' is not defined
int ER_HOST_IS_BLOCKED = 1129; //SQLSTATE: HY000 Message: Host '%s' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
int ER_HOST_NOT_PRIVILEGED = 1130; //SQLSTATE: HY000 Message: Host '%s' is not allowed to connect to this MySQL server
int ER_PASSWORD_ANONYMOUS_USER = 1131; //SQLSTATE: 42000 Message: You are using MySQL as an anonymous user and anonymous users are not allowed to change passwords
int ER_PASSWORD_NOT_ALLOWED = 1132; //SQLSTATE: 42000 Message: You must have privileges to update tables in the mysql database to be able to change passwords for others
int ER_PASSWORD_NO_MATCH = 1133; //SQLSTATE: 42000 Message: Can't find any matching row in the user table
int ER_UPDATE_INFO = 1134; //SQLSTATE: HY000 Message: Rows matched: %ld Changed: %ld Warnings: %ld
int ER_CANT_CREATE_THREAD = 1135; //SQLSTATE: HY000 Message: Can't create a new thread (errno %d); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug
int ER_WRONG_VALUE_COUNT_ON_ROW = 1136; //SQLSTATE: 21S01 Message: Column count doesn't match value count at row %ld
int ER_CANT_REOPEN_TABLE = 1137; //SQLSTATE: HY000 Message: Can't reopen table: '%s'
int ER_INVALID_USE_OF_NULL = 1138; //SQLSTATE: 22004 Message: Invalid use of NULL value
int ER_REGEXP_ERROR = 1139; //SQLSTATE: 42000 Message: Got error '%s' from regexp
int ER_MIX_OF_GROUP_FUNC_AND_FIELDS = 1140; //SQLSTATE: 42000 Message: Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is no GROUP BY clause
int ER_NONEXISTING_GRANT = 1141; //SQLSTATE: 42000 Message: There is no such grant defined for user '%s' on host '%s'
int ER_TABLEACCESS_DENIED_ERROR = 1142; //SQLSTATE: 42000 Message: %s command denied to user '%s'@'%s' for table '%s'
int ER_COLUMNACCESS_DENIED_ERROR = 1143; //SQLSTATE: 42000 Message: %s command denied to user '%s'@'%s' for column '%s' in table '%s'
int ER_ILLEGAL_GRANT_FOR_TABLE = 1144; //SQLSTATE: 42000 Message: Illegal GRANT/REVOKE command; please consult the manual to see which privileges can be used
int ER_GRANT_WRONG_HOST_OR_USER = 1145; //SQLSTATE: 42000 Message: The host or user argument to GRANT is too long
int ER_NO_SUCH_TABLE = 1146; //SQLSTATE: 42S02 Message: Table '%s.%s' doesn't exist
int ER_NONEXISTING_TABLE_GRANT = 1147; //SQLSTATE: 42000 Message: There is no such grant defined for user '%s' on host '%s' on table '%s'
int ER_NOT_ALLOWED_COMMAND = 1148; //SQLSTATE: 42000 Message: The used command is not allowed with this MySQL version
int ER_SYNTAX_ERROR = 1149; //SQLSTATE: 42000 Message: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use
int ER_DELAYED_CANT_CHANGE_LOCK = 1150; //SQLSTATE: HY000 Message: Delayed insert thread couldn't get requested lock for table %s
int ER_TOO_MANY_DELAYED_THREADS = 1151; //SQLSTATE: HY000 Message: Too many delayed threads in use
int ER_ABORTING_CONNECTION = 1152; //SQLSTATE: 08S01 Message: Aborted connection %ld to db: '%s' user: '%s' (%s)
int ER_NET_PACKET_TOO_LARGE = 1153; //SQLSTATE: 08S01 Message: Got a packet bigger than 'max_allowed_packet' bytes
int ER_NET_READ_ERROR_FROM_PIPE = 1154; //SQLSTATE: 08S01 Message: Got a read error from the connection pipe
int ER_NET_FCNTL_ERROR = 1155; //SQLSTATE: 08S01 Message: Got an error from fcntl()
int ER_NET_PACKETS_OUT_OF_ORDER = 1156; //SQLSTATE: 08S01 Message: Got packets out of order
int ER_NET_UNCOMPRESS_ERROR = 1157; //SQLSTATE: 08S01 Message: Couldn't uncompress communication packet
int ER_NET_READ_ERROR = 1158; //SQLSTATE: 08S01 Message: Got an error reading communication packets
int ER_NET_READ_INTERRUPTED = 1159; //SQLSTATE: 08S01 Message: Got timeout reading communication packets
int ER_NET_ERROR_ON_WRITE = 1160; //SQLSTATE: 08S01 Message: Got an error writing communication packets
int ER_NET_WRITE_INTERRUPTED = 1161; //SQLSTATE: 08S01 Message: Got timeout writing communication packets
int ER_TOO_LONG_STRING = 1162; //SQLSTATE: 42000 Message: Result string is longer than 'max_allowed_packet' bytes
int ER_TABLE_CANT_HANDLE_BLOB = 1163; //SQLSTATE: 42000 Message: The used table type doesn't support BLOB/TEXT columns
int ER_TABLE_CANT_HANDLE_AUTO_INCREMENT = 1164; //SQLSTATE: 42000 Message: The used table type doesn't support AUTO_INCREMENT columns
int ER_DELAYED_INSERT_TABLE_LOCKED = 1165; //SQLSTATE: HY000 Message: INSERT DELAYED can't be used with table '%s' because it is locked with LOCK TABLES
int ER_WRONG_COLUMN_NAME = 1166; //SQLSTATE: 42000 Message: Incorrect column name '%s'
int ER_WRONG_KEY_COLUMN = 1167; //SQLSTATE: 42000 Message: The used storage engine can't index column '%s'
int ER_WRONG_MRG_TABLE = 1168; //SQLSTATE: HY000 Message: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
int ER_DUP_UNIQUE = 1169; //SQLSTATE: 23000 Message: Can't write, because of unique constraint, to table '%s'
int ER_BLOB_KEY_WITHOUT_LENGTH = 1170; //SQLSTATE: 42000 Message: BLOB/TEXT column '%s' used in key specification without a key length
int ER_PRIMARY_CANT_HAVE_NULL = 1171; //SQLSTATE: 42000 Message: All parts of a PRIMARY KEY must be NOT NULL; if you need NULL in a key, use UNIQUE instead
int ER_TOO_MANY_ROWS = 1172; //SQLSTATE: 42000 Message: Result consisted of more than one row
int ER_REQUIRES_PRIMARY_KEY = 1173; //SQLSTATE: 42000 Message: This table type requires a primary key
int ER_NO_RAID_COMPILED = 1174; //SQLSTATE: HY000 Message: This version of MySQL is not compiled with RAID support
int ER_UPDATE_WITHOUT_KEY_IN_SAFE_MODE = 1175; //SQLSTATE: HY000 Message: You are using safe update mode and you tried to update a table without a WHERE that uses a KEY column
int ER_KEY_DOES_NOT_EXITS = 1176; //SQLSTATE: 42000 Message: Key '%s' doesn't exist in table '%s'
int ER_CHECK_NO_SUCH_TABLE = 1177; //SQLSTATE: 42000 Message: Can't open table
int ER_CHECK_NOT_IMPLEMENTED = 1178; //SQLSTATE: 42000 Message: The storage engine for the table doesn't support %s
int ER_CANT_DO_THIS_DURING_AN_TRANSACTION = 1179; //SQLSTATE: 25000 Message: You are not allowed to execute this command in a transaction
int ER_ERROR_DURING_COMMIT = 1180; //SQLSTATE: HY000 Message: Got error %d during COMMIT
int ER_ERROR_DURING_ROLLBACK = 1181; //SQLSTATE: HY000 Message: Got error %d during ROLLBACK
int ER_ERROR_DURING_FLUSH_LOGS = 1182; //SQLSTATE: HY000 Message: Got error %d during FLUSH_LOGS
int ER_ERROR_DURING_CHECKPOINT = 1183; //SQLSTATE: HY000 Message: Got error %d during CHECKPOINT
int ER_NEW_ABORTING_CONNECTION = 1184; //SQLSTATE: 08S01 Message: Aborted connection %ld to db: '%s' user: '%s' host: '%s' (%s)
int ER_DUMP_NOT_IMPLEMENTED = 1185; //SQLSTATE: HY000 Message: The storage engine for the table does not support binary table dump
int ER_FLUSH_MASTER_BINLOG_CLOSED = 1186; //SQLSTATE: HY000 Message: Binlog closed, cannot RESET MASTER
int ER_INDEX_REBUILD = 1187; //SQLSTATE: HY000 Message: Failed rebuilding the index of dumped table '%s'
int ER_MASTER = 1188; //SQLSTATE: HY000 Message: Error from master: '%s'
int ER_MASTER_NET_READ = 1189; //SQLSTATE: 08S01 Message: Net error reading from master
int ER_MASTER_NET_WRITE = 1190; //SQLSTATE: 08S01 Message: Net error writing to master
int ER_FT_MATCHING_KEY_NOT_FOUND = 1191; //SQLSTATE: HY000 Message: Can't find FULLTEXT index matching the column list
int ER_LOCK_OR_ACTIVE_TRANSACTION = 1192; //SQLSTATE: HY000 Message: Can't execute the given command because you have active locked tables or an active transaction
int ER_UNKNOWN_SYSTEM_VARIABLE = 1193; //SQLSTATE: HY000 Message: Unknown system variable '%s'
int ER_CRASHED_ON_USAGE = 1194; //SQLSTATE: HY000 Message: Table '%s' is marked as crashed and should be repaired
int ER_CRASHED_ON_REPAIR = 1195; //SQLSTATE: HY000 Message: Table '%s' is marked as crashed and last (automatic?) repair failed
int ER_WARNING_NOT_COMPLETE_ROLLBACK = 1196; //SQLSTATE: HY000 Message: Some non-transactional changed tables couldn't be rolled back
int ER_TRANS_CACHE_FULL = 1197; //SQLSTATE: HY000 Message: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
int ER_SLAVE_MUST_STOP = 1198; //SQLSTATE: HY000 Message: This operation cannot be performed with a running slave; run STOP SLAVE first
int ER_SLAVE_NOT_RUNNING = 1199; //SQLSTATE: HY000 Message: This operation requires a running slave; configure slave and do START SLAVE
int ER_BAD_SLAVE = 1200; //SQLSTATE: HY000 Message: The server is not configured as slave; fix in config file or with CHANGE MASTER TO
int ER_MASTER_INFO = 1201; //SQLSTATE: HY000 Message: Could not initialize master info structure; more error messages can be found in the MySQL error log
int ER_SLAVE_THREAD = 1202; //SQLSTATE: HY000 Message: Could not create slave thread; check system resources
int ER_TOO_MANY_USER_CONNECTIONS = 1203; //SQLSTATE: 42000 Message: User %s already has more than 'max_user_connections' active connections
int ER_SET_CONSTANTS_ONLY = 1204; //SQLSTATE: HY000 Message: You may only use constant expressions with SET
int ER_LOCK_WAIT_TIMEOUT = 1205; //SQLSTATE: HY000 Message: Lock wait timeout exceeded; try restarting transaction
int ER_LOCK_TABLE_FULL = 1206; //SQLSTATE: HY000 Message: The total number of locks exceeds the lock table size
int ER_READ_ONLY_TRANSACTION = 1207; //SQLSTATE: 25000 Message: Update locks cannot be acquired during a READ UNCOMMITTED transaction
int ER_DROP_DB_WITH_READ_LOCK = 1208; //SQLSTATE: HY000 Message: DROP DATABASE not allowed while thread is holding global read lock
int ER_CREATE_DB_WITH_READ_LOCK = 1209; //SQLSTATE: HY000 Message: CREATE DATABASE not allowed while thread is holding global read lock
int ER_WRONG_ARGUMENTS = 1210; //SQLSTATE: HY000 Message: Incorrect arguments to %s
int ER_NO_PERMISSION_TO_CREATE_USER = 1211; //SQLSTATE: 42000 Message: '%s'@'%s' is not allowed to create new users
int ER_UNION_TABLES_IN_DIFFERENT_DIR = 1212; //SQLSTATE: HY000 Message: Incorrect table definition; all MERGE tables must be in the same database
int ER_LOCK_DEADLOCK = 1213; //SQLSTATE: 40001 Message: Deadlock found when trying to get lock; try restarting transaction
int ER_TABLE_CANT_HANDLE_FT = 1214; //SQLSTATE: HY000 Message: The used table type doesn't support FULLTEXT indexes
int ER_CANNOT_ADD_FOREIGN = 1215; //SQLSTATE: HY000 Message: Cannot add foreign key constraint
int ER_NO_REFERENCED_ROW = 1216; //SQLSTATE: 23000 Message: Cannot add or update a child row: a foreign key constraint fails
int ER_ROW_IS_REFERENCED = 1217; //SQLSTATE: 23000 Message: Cannot delete or update a parent row: a foreign key constraint fails
int ER_CONNECT_TO_MASTER = 1218; //SQLSTATE: 08S01 Message: Error connecting to master: %s
int ER_QUERY_ON_MASTER = 1219; //SQLSTATE: HY000 Message: Error running query on master: %s
int ER_ERROR_WHEN_EXECUTING_COMMAND = 1220; //SQLSTATE: HY000 Message: Error when executing command %s: %s
int ER_WRONG_USAGE = 1221; //SQLSTATE: HY000 Message: Incorrect usage of %s and %s
int ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT = 1222; //SQLSTATE: 21000 Message: The used SELECT statements have a different number of columns
int ER_CANT_UPDATE_WITH_READLOCK = 1223; //SQLSTATE: HY000 Message: Can't execute the query because you have a conflicting read lock
int ER_MIXING_NOT_ALLOWED = 1224; //SQLSTATE: HY000 Message: Mixing of transactional and non-transactional tables is disabled
int ER_DUP_ARGUMENT = 1225; //SQLSTATE: HY000 Message: Option '%s' used twice in statement
int ER_USER_LIMIT_REACHED = 1226; //SQLSTATE: 42000 Message: User '%s' has exceeded the '%s' resource (current value: %ld)
int ER_SPECIFIC_ACCESS_DENIED_ERROR = 1227; //SQLSTATE: 42000 Message: Access denied; you need (at least one of) the %s privilege(s) for this operation
int ER_LOCAL_VARIABLE = 1228; //SQLSTATE: HY000 Message: Variable '%s' is a SESSION variable and can't be used with SET GLOBAL
int ER_GLOBAL_VARIABLE = 1229; //SQLSTATE: HY000 Message: Variable '%s' is a GLOBAL variable and should be set with SET GLOBAL
int ER_NO_DEFAULT = 1230; //SQLSTATE: 42000 Message: Variable '%s' doesn't have a default value
int ER_WRONG_VALUE_FOR_VAR = 1231; //SQLSTATE: 42000 Message: Variable '%s' can't be set to the value of '%s'
int ER_WRONG_TYPE_FOR_VAR = 1232; //SQLSTATE: 42000 Message: Incorrect argument type to variable '%s'
int ER_VAR_CANT_BE_READ = 1233; //SQLSTATE: HY000 Message: Variable '%s' can only be set, not read
int ER_CANT_USE_OPTION_HERE = 1234; //SQLSTATE: 42000 Message: Incorrect usage/placement of '%s'
int ER_NOT_SUPPORTED_YET = 1235; //SQLSTATE: 42000 Message: This version of MySQL doesn't yet support '%s'
int ER_MASTER_FATAL_ERROR_READING_BINLOG = 1236; //SQLSTATE: HY000 Message: Got fatal error %d from master when reading data from binary log: '%s'
int ER_SLAVE_IGNORED_TABLE = 1237; //SQLSTATE: HY000 Message: Slave SQL thread ignored the query because of replicate-*-table rules
int ER_INCORRECT_GLOBAL_LOCAL_VAR = 1238; //SQLSTATE: HY000 Message: Variable '%s' is a %s variable
int ER_WRONG_FK_DEF = 1239; //SQLSTATE: 42000 Message: Incorrect foreign key definition for '%s': %s
int ER_KEY_REF_DO_NOT_MATCH_TABLE_REF = 1240; //SQLSTATE: HY000 Message: Key reference and table reference don't match
int ER_OPERAND_COLUMNS = 1241; //SQLSTATE: 21000 Message: Operand should contain %d column(s)
int ER_SUBQUERY_NO_1_ROW = 1242; //SQLSTATE: 21000 Message: Subquery returns more than 1 row
int ER_UNKNOWN_STMT_HANDLER = 1243; //SQLSTATE: HY000 Message: Unknown prepared statement handler (%.*s) given to %s
int ER_CORRUPT_HELP_DB = 1244; //SQLSTATE: HY000 Message: Help database is corrupt or does not exist
int ER_CYCLIC_REFERENCE = 1245; //SQLSTATE: HY000 Message: Cyclic reference on subqueries
int ER_AUTO_CONVERT = 1246; //SQLSTATE: HY000 Message: Converting column '%s' from %s to %s
int ER_ILLEGAL_REFERENCE = 1247; //SQLSTATE: 42S22 Message: Reference '%s' not supported (%s)
int ER_DERIVED_MUST_HAVE_ALIAS = 1248; //SQLSTATE: 42000 Message: Every derived table must have its own alias
int ER_SELECT_REDUCED = 1249; //SQLSTATE: 01000 Message: Select %u was reduced during optimization
int ER_TABLENAME_NOT_ALLOWED_HERE = 1250; //SQLSTATE: 42000 Message: Table '%s' from one of the SELECTs cannot be used in %s
int ER_NOT_SUPPORTED_AUTH_MODE = 1251; //SQLSTATE: 08004 Message: Client does not support authentication protocol requested by server; consider upgrading MySQL client
int ER_SPATIAL_CANT_HAVE_NULL = 1252; //SQLSTATE: 42000 Message: All parts of a SPATIAL index must be NOT NULL
int ER_COLLATION_CHARSET_MISMATCH = 1253; //SQLSTATE: 42000 Message: COLLATION '%s' is not valid for CHARACTER SET '%s'
int ER_SLAVE_WAS_RUNNING = 1254; //SQLSTATE: HY000 Message: Slave is already running
int ER_SLAVE_WAS_NOT_RUNNING = 1255; //SQLSTATE: HY000 Message: Slave already has been stopped
int ER_TOO_BIG_FOR_UNCOMPRESS = 1256; //SQLSTATE: HY000 Message: Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)
int ER_ZLIB_Z_MEM_ERROR = 1257; //SQLSTATE: HY000 Message: ZLIB: Not enough memory
int ER_ZLIB_Z_BUF_ERROR = 1258; //SQLSTATE: HY000 Message: ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)
int ER_ZLIB_Z_DATA_ERROR = 1259; //SQLSTATE: HY000 Message: ZLIB: Input data corrupted
int ER_CUT_VALUE_GROUP_CONCAT = 1260; //SQLSTATE: HY000 Message: Row %u was cut by GROUP_CONCAT()
int ER_WARN_TOO_FEW_RECORDS = 1261; //SQLSTATE: 01000 Message: Row %ld doesn't contain data for all columns
int ER_WARN_TOO_MANY_RECORDS = 1262; //SQLSTATE: 01000 Message: Row %ld was truncated; it contained more data than there were input columns
int ER_WARN_NULL_TO_NOTNULL = 1263; //SQLSTATE: 22004 Message: Column set to default value; NULL supplied to NOT NULL column '%s' at row %ld
int ER_WARN_DATA_OUT_OF_RANGE = 1264; //SQLSTATE: 22003 Message: Out of range value for column '%s' at row %ld
int ER_WARN_DATA_TRUNCATED = 1265; //SQLSTATE: 01000 Message: Data truncated for column '%s' at row %ld
int ER_WARN_USING_OTHER_HANDLER = 1266; //SQLSTATE: HY000 Message: Using storage engine %s for table '%s'
int ER_CANT_AGGREGATE_2COLLATIONS = 1267; //SQLSTATE: HY000 Message: Illegal mix of collations (%s,%s) and (%s,%s) for operation '%s'
int ER_DROP_USER = 1268; //SQLSTATE: HY000 Message: Cannot drop one or more of the requested users
int ER_REVOKE_GRANTS = 1269; //SQLSTATE: HY000 Message: Can't revoke all privileges for one or more of the requested users
int ER_CANT_AGGREGATE_3COLLATIONS = 1270; //SQLSTATE: HY000 Message: Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation '%s'
int ER_CANT_AGGREGATE_NCOLLATIONS = 1271; //SQLSTATE: HY000 Message: Illegal mix of collations for operation '%s'
int ER_VARIABLE_IS_NOT_STRUCT = 1272; //SQLSTATE: HY000 Message: Variable '%s' is not a variable component (can't be used as XXXX.variable_name)
int ER_UNKNOWN_COLLATION = 1273; //SQLSTATE: HY000 Message: Unknown collation: '%s'
int ER_SLAVE_IGNORED_SSL_PARAMS = 1274; //SQLSTATE: HY000 Message: SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started
int ER_SERVER_IS_IN_SECURE_AUTH_MODE = 1275; //SQLSTATE: HY000 Message: Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format
int ER_WARN_FIELD_RESOLVED = 1276; //SQLSTATE: HY000 Message: Field or reference '%s%s%s%s%s' of SELECT #%d was resolved in SELECT #%d
int ER_BAD_SLAVE_UNTIL_COND = 1277; //SQLSTATE: HY000 Message: Incorrect parameter or combination of parameters for START SLAVE UNTIL
int ER_MISSING_SKIP_SLAVE = 1278; //SQLSTATE: HY000 Message: It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart
int ER_UNTIL_COND_IGNORED = 1279; //SQLSTATE: HY000 Message: SQL thread is not to be started so UNTIL options are ignored
int ER_WRONG_NAME_FOR_INDEX = 1280; //SQLSTATE: 42000 Message: Incorrect index name '%s'
int ER_WRONG_NAME_FOR_CATALOG = 1281; //SQLSTATE: 42000 Message: Incorrect catalog name '%s'
int ER_WARN_QC_RESIZE = 1282; //SQLSTATE: HY000 Message: Query cache failed to set size %lu; new query cache size is %lu
int ER_BAD_FT_COLUMN = 1283; //SQLSTATE: HY000 Message: Column '%s' cannot be part of FULLTEXT index
int ER_UNKNOWN_KEY_CACHE = 1284; //SQLSTATE: HY000 Message: Unknown key cache '%s'
int ER_WARN_HOSTNAME_WONT_WORK = 1285; //SQLSTATE: HY000 Message: MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work
int ER_UNKNOWN_STORAGE_ENGINE = 1286; //SQLSTATE: 42000 Message: Unknown storage engine '%s'
int ER_WARN_DEPRECATED_SYNTAX = 1287; //SQLSTATE: HY000 Message: '%s' is deprecated and will be removed in a future release. Please use %s instead
int ER_NON_UPDATABLE_TABLE = 1288; //SQLSTATE: HY000 Message: The target table %s of the %s is not updatable
int ER_FEATURE_DISABLED = 1289; //SQLSTATE: HY000 Message: The '%s' feature is disabled; you need MySQL built with '%s' to have it working
int ER_OPTION_PREVENTS_STATEMENT = 1290; //SQLSTATE: HY000 Message: The MySQL server is running with the %s option so it cannot execute this statement
int ER_DUPLICATED_VALUE_IN_TYPE = 1291; //SQLSTATE: HY000 Message: Column '%s' has duplicated value '%s' in %s
int ER_TRUNCATED_WRONG_VALUE = 1292; //SQLSTATE: 22007 Message: Truncated incorrect %s value: '%s'
int ER_TOO_MUCH_AUTO_TIMESTAMP_COLS = 1293; //SQLSTATE: HY000 Message: Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause
int ER_INVALID_ON_UPDATE = 1294; //SQLSTATE: HY000 Message: Invalid ON UPDATE clause for '%s' column
int ER_UNSUPPORTED_PS = 1295; //SQLSTATE: HY000 Message: This command is not supported in the prepared statement protocol yet
int ER_GET_ERRMSG = 1296; //SQLSTATE: HY000 Message: Got error %d '%s' from %s
int ER_GET_TEMPORARY_ERRMSG = 1297; //SQLSTATE: HY000 Message: Got temporary error %d '%s' from %s
int ER_UNKNOWN_TIME_ZONE = 1298; //SQLSTATE: HY000 Message: Unknown or incorrect time zone: '%s'
int ER_WARN_INVALID_TIMESTAMP = 1299; //SQLSTATE: HY000 Message: Invalid TIMESTAMP value in column '%s' at row %ld
int ER_INVALID_CHARACTER_STRING = 1300; //SQLSTATE: HY000 Message: Invalid %s character string: '%s'
int ER_WARN_ALLOWED_PACKET_OVERFLOWED = 1301; //SQLSTATE: HY000 Message: Result of %s() was larger than max_allowed_packet (%ld) - truncated
int ER_CONFLICTING_DECLARATIONS = 1302; //SQLSTATE: HY000 Message: Conflicting declarations: '%s%s' and '%s%s'
int ER_SP_NO_RECURSIVE_CREATE = 1303; //SQLSTATE: 2F003 Message: Can't create a %s from within another stored routine
int ER_SP_ALREADY_EXISTS = 1304; //SQLSTATE: 42000 Message: %s %s already exists
int ER_SP_DOES_NOT_EXIST = 1305; //SQLSTATE: 42000 Message: %s %s does not exist
int ER_SP_DROP_FAILED = 1306; //SQLSTATE: HY000 Message: Failed to DROP %s %s
int ER_SP_STORE_FAILED = 1307; //SQLSTATE: HY000 Message: Failed to CREATE %s %s
int ER_SP_LILABEL_MISMATCH = 1308; //SQLSTATE: 42000 Message: %s with no matching label: %s
int ER_SP_LABEL_REDEFINE = 1309; //SQLSTATE: 42000 Message: Redefining label %s
int ER_SP_LABEL_MISMATCH = 1310; //SQLSTATE: 42000 Message: End-label %s without match
int ER_SP_UNINIT_VAR = 1311; //SQLSTATE: 01000 Message: Referring to uninitialized variable %s
int ER_SP_BADSELECT = 1312; //SQLSTATE: 0A000 Message: PROCEDURE %s can't return a result set in the given context
int ER_SP_BADRETURN = 1313; //SQLSTATE: 42000 Message: RETURN is only allowed in a FUNCTION
int ER_SP_BADSTATEMENT = 1314; //SQLSTATE: 0A000 Message: %s is not allowed in stored procedures
int ER_UPDATE_LOG_DEPRECATED_IGNORED = 1315; //SQLSTATE: 42000 Message: The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been ignored. This option will be removed in MySQL 5.6.
int ER_UPDATE_LOG_DEPRECATED_TRANSLATED = 1316; //SQLSTATE: 42000 Message: The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been translated to SET SQL_LOG_BIN. This option will be removed in MySQL 5.6.
int ER_QUERY_INTERRUPTED = 1317; //SQLSTATE: 70100 Message: Query execution was interrupted
int ER_SP_WRONG_NO_OF_ARGS = 1318; //SQLSTATE: 42000 Message: Incorrect number of arguments for %s %s; expected %u, got %u
int ER_SP_COND_MISMATCH = 1319; //SQLSTATE: 42000 Message: Undefined CONDITION: %s
int ER_SP_NORETURN = 1320; //SQLSTATE: 42000 Message: No RETURN found in FUNCTION %s
int ER_SP_NORETURNEND = 1321; //SQLSTATE: 2F005 Message: FUNCTION %s ended without RETURN
int ER_SP_BAD_CURSOR_QUERY = 1322; //SQLSTATE: 42000 Message: Cursor statement must be a SELECT
int ER_SP_BAD_CURSOR_SELECT = 1323; //SQLSTATE: 42000 Message: Cursor SELECT must not have INTO
int ER_SP_CURSOR_MISMATCH = 1324; //SQLSTATE: 42000 Message: Undefined CURSOR: %s
int ER_SP_CURSOR_ALREADY_OPEN = 1325; //SQLSTATE: 24000 Message: Cursor is already open
int ER_SP_CURSOR_NOT_OPEN = 1326; //SQLSTATE: 24000 Message: Cursor is not open
int ER_SP_UNDECLARED_VAR = 1327; //SQLSTATE: 42000 Message: Undeclared variable: %s
int ER_SP_WRONG_NO_OF_FETCH_ARGS = 1328; //SQLSTATE: HY000 Message: Incorrect number of FETCH variables
int ER_SP_FETCH_NO_DATA = 1329; //SQLSTATE: 02000 Message: No data - zero rows fetched, selected, or processed
int ER_SP_DUP_PARAM = 1330; //SQLSTATE: 42000 Message: Duplicate parameter: %s
int ER_SP_DUP_VAR = 1331; //SQLSTATE: 42000 Message: Duplicate variable: %s
int ER_SP_DUP_COND = 1332; //SQLSTATE: 42000 Message: Duplicate condition: %s
int ER_SP_DUP_CURS = 1333; //SQLSTATE: 42000 Message: Duplicate cursor: %s
int ER_SP_CANT_ALTER = 1334; //SQLSTATE: HY000 Message: Failed to ALTER %s %s
int ER_SP_SUBSELECT_NYI = 1335; //SQLSTATE: 0A000 Message: Subquery value not supported
int ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG = 1336; //SQLSTATE: 0A000 Message: %s is not allowed in stored function or trigger
int ER_SP_VARCOND_AFTER_CURSHNDLR = 1337; //SQLSTATE: 42000 Message: Variable or condition declaration after cursor or handler declaration
int ER_SP_CURSOR_AFTER_HANDLER = 1338; //SQLSTATE: 42000 Message: Cursor declaration after handler declaration
int ER_SP_CASE_NOT_FOUND = 1339; //SQLSTATE: 20000 Message: Case not found for CASE statement
int ER_FPARSER_TOO_BIG_FILE = 1340; //SQLSTATE: HY000 Message: Configuration file '%s' is too big
int ER_FPARSER_BAD_HEADER = 1341; //SQLSTATE: HY000 Message: Malformed file type header in file '%s'
int ER_FPARSER_EOF_IN_COMMENT = 1342; //SQLSTATE: HY000 Message: Unexpected end of file while parsing comment '%s'
int ER_FPARSER_ERROR_IN_PARAMETER = 1343; //SQLSTATE: HY000 Message: Error while parsing parameter '%s' (line: '%s')
int ER_FPARSER_EOF_IN_UNKNOWN_PARAMETER = 1344; //SQLSTATE: HY000 Message: Unexpected end of file while skipping unknown parameter '%s'
int ER_VIEW_NO_EXPLAIN = 1345; //SQLSTATE: HY000 Message: EXPLAIN/SHOW can not be issued; lacking privileges for underlying table
int ER_FRM_UNKNOWN_TYPE = 1346; //SQLSTATE: HY000 Message: File '%s' has unknown type '%s' in its header
int ER_WRONG_OBJECT = 1347; //SQLSTATE: HY000 Message: '%s.%s' is not %s
int ER_NONUPDATEABLE_COLUMN = 1348; //SQLSTATE: HY000 Message: Column '%s' is not updatable
int ER_VIEW_SELECT_DERIVED = 1349; //SQLSTATE: HY000 Message: View's SELECT contains a subquery in the FROM clause
int ER_VIEW_SELECT_CLAUSE = 1350; //SQLSTATE: HY000 Message: View's SELECT contains a '%s' clause
int ER_VIEW_SELECT_VARIABLE = 1351; //SQLSTATE: HY000 Message: View's SELECT contains a variable or parameter
int ER_VIEW_SELECT_TMPTABLE = 1352; //SQLSTATE: HY000 Message: View's SELECT refers to a temporary table '%s'
int ER_VIEW_WRONG_LIST = 1353; //SQLSTATE: HY000 Message: View's SELECT and view's field list have different column counts
int ER_WARN_VIEW_MERGE = 1354; //SQLSTATE: HY000 Message: View merge algorithm can't be used here for now (assumed undefined algorithm)
int ER_WARN_VIEW_WITHOUT_KEY = 1355; //SQLSTATE: HY000 Message: View being updated does not have complete key of underlying table in it
int ER_VIEW_INVALID = 1356; //SQLSTATE: HY000 Message: View '%s.%s' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
int ER_SP_NO_DROP_SP = 1357; //SQLSTATE: HY000 Message: Can't drop or alter a %s from within another stored routine
int ER_SP_GOTO_IN_HNDLR = 1358; //SQLSTATE: HY000 Message: GOTO is not allowed in a stored procedure handler
int ER_TRG_ALREADY_EXISTS = 1359; //SQLSTATE: HY000 Message: Trigger already exists
int ER_TRG_DOES_NOT_EXIST = 1360; //SQLSTATE: HY000 Message: Trigger does not exist
int ER_TRG_ON_VIEW_OR_TEMP_TABLE = 1361; //SQLSTATE: HY000 Message: Trigger's '%s' is view or temporary table
int ER_TRG_CANT_CHANGE_ROW = 1362; //SQLSTATE: HY000 Message: Updating of %s row is not allowed in %strigger
int ER_TRG_NO_SUCH_ROW_IN_TRG = 1363; //SQLSTATE: HY000 Message: There is no %s row in %s trigger
int ER_NO_DEFAULT_FOR_FIELD = 1364; //SQLSTATE: HY000 Message: Field '%s' doesn't have a default value
int ER_DIVISION_BY_ZERO = 1365; //SQLSTATE: 22012 Message: Division by 0
int ER_TRUNCATED_WRONG_VALUE_FOR_FIELD = 1366; //SQLSTATE: HY000 Message: Incorrect %s value: '%s' for column '%s' at row %ld
int ER_ILLEGAL_VALUE_FOR_TYPE = 1367; //SQLSTATE: 22007 Message: Illegal %s '%s' value found during parsing
int ER_VIEW_NONUPD_CHECK = 1368; //SQLSTATE: HY000 Message: CHECK OPTION on non-updatable view '%s.%s'
int ER_VIEW_CHECK_FAILED = 1369; //SQLSTATE: HY000 Message: CHECK OPTION failed '%s.%s'
int ER_PROCACCESS_DENIED_ERROR = 1370; //SQLSTATE: 42000 Message: %s command denied to user '%s'@'%s' for routine '%s'
int ER_RELAY_LOG_FAIL = 1371; //SQLSTATE: HY000 Message: Failed purging old relay logs: %s
int ER_PASSWD_LENGTH = 1372; //SQLSTATE: HY000 Message: Password hash should be a %d-digit hexadecimal number
int ER_UNKNOWN_TARGET_BINLOG = 1373; //SQLSTATE: HY000 Message: Target log not found in binlog index
int ER_IO_ERR_LOG_INDEX_READ = 1374; //SQLSTATE: HY000 Message: I/O error reading log index file
int ER_BINLOG_PURGE_PROHIBITED = 1375; //SQLSTATE: HY000 Message: Server configuration does not permit binlog purge
int ER_FSEEK_FAIL = 1376; //SQLSTATE: HY000 Message: Failed on fseek()
int ER_BINLOG_PURGE_FATAL_ERR = 1377; //SQLSTATE: HY000 Message: Fatal error during log purge
int ER_LOG_IN_USE = 1378; //SQLSTATE: HY000 Message: A purgeable log is in use, will not purge
int ER_LOG_PURGE_UNKNOWN_ERR = 1379; //SQLSTATE: HY000 Message: Unknown error during log purge
int ER_RELAY_LOG_INIT = 1380; //SQLSTATE: HY000 Message: Failed initializing relay log position: %s
int ER_NO_BINARY_LOGGING = 1381; //SQLSTATE: HY000 Message: You are not using binary logging
int ER_RESERVED_SYNTAX = 1382; //SQLSTATE: HY000 Message: The '%s' syntax is reserved for purposes internal to the MySQL server
int ER_WSAS_FAILED = 1383; //SQLSTATE: HY000 Message: WSAStartup Failed
int ER_DIFF_GROUPS_PROC = 1384; //SQLSTATE: HY000 Message: Can't handle procedures with different groups yet
int ER_NO_GROUP_FOR_PROC = 1385; //SQLSTATE: HY000 Message: Select must have a group with this procedure
int ER_ORDER_WITH_PROC = 1386; //SQLSTATE: HY000 Message: Can't use ORDER clause with this procedure
int ER_LOGGING_PROHIBIT_CHANGING_OF = 1387; //SQLSTATE: HY000 Message: Binary logging and replication forbid changing the global server %s
int ER_NO_FILE_MAPPING = 1388; //SQLSTATE: HY000 Message: Can't map file: %s, errno: %d
int ER_WRONG_MAGIC = 1389; //SQLSTATE: HY000 Message: Wrong magic in %s
int ER_PS_MANY_PARAM = 1390; //SQLSTATE: HY000 Message: Prepared statement contains too many placeholders
int ER_KEY_PART_0 = 1391; //SQLSTATE: HY000 Message: Key part '%s' length cannot be 0
int ER_VIEW_CHECKSUM = 1392; //SQLSTATE: HY000 Message: View text checksum failed
int ER_VIEW_MULTIUPDATE = 1393; //SQLSTATE: HY000 Message: Can not modify more than one base table through a join view '%s.%s'
int ER_VIEW_NO_INSERT_FIELD_LIST = 1394; //SQLSTATE: HY000 Message: Can not insert into join view '%s.%s' without fields list
int ER_VIEW_DELETE_MERGE_VIEW = 1395; //SQLSTATE: HY000 Message: Can not delete from join view '%s.%s'
int ER_CANNOT_USER = 1396; //SQLSTATE: HY000 Message: Operation %s failed for %s
int ER_XAER_NOTA = 1397; //SQLSTATE: XAE04 Message: XAER_NOTA: Unknown XID
int ER_XAER_INVAL = 1398; //SQLSTATE: XAE05 Message: XAER_INVAL: Invalid arguments (or unsupported command)
int ER_XAER_RMFAIL = 1399; //SQLSTATE: XAE07 Message: XAER_RMFAIL: The command cannot be executed when global transaction is in the %s state
int ER_XAER_OUTSIDE = 1400; //SQLSTATE: XAE09 Message: XAER_OUTSIDE: Some work is done outside global transaction
int ER_XA_RMERR = 1401;
int ER_XA_RBROLLBACK = 1402; //SQLSTATE: XA100 Message: XA_RBROLLBACK: Transaction branch was rolled back
int ER_NONEXISTING_PROC_GRANT = 1403; //SQLSTATE: 42000 Message: There is no such grant defined for user '%s' on host '%s' on routine '%s'
int ER_PROC_AUTO_GRANT_FAIL = 1404; //SQLSTATE: HY000 Message: Failed to grant EXECUTE and ALTER ROUTINE privileges
int ER_PROC_AUTO_REVOKE_FAIL = 1405; //SQLSTATE: HY000 Message: Failed to revoke all privileges to dropped routine
int ER_DATA_TOO_LONG = 1406; //SQLSTATE: 22001 Message: Data too long for column '%s' at row %ld
int ER_SP_BAD_SQLSTATE = 1407; //SQLSTATE: 42000 Message: Bad; //SQLSTATE: '%s'
int ER_STARTUP = 1408; //SQLSTATE: HY000 Message: %s: ready for connections. Version: '%s' socket: '%s' port: %d %s
int ER_LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR = 1409; //SQLSTATE: HY000 Message: Can't load value from file with fixed size rows to variable
int ER_CANT_CREATE_USER_WITH_GRANT = 1410; //SQLSTATE: 42000 Message: You are not allowed to create a user with GRANT
int ER_WRONG_VALUE_FOR_TYPE = 1411; //SQLSTATE: HY000 Message: Incorrect %s value: '%s' for function %s
int ER_TABLE_DEF_CHANGED = 1412; //SQLSTATE: HY000 Message: Table definition has changed, please retry transaction
int ER_SP_DUP_HANDLER = 1413; //SQLSTATE: 42000 Message: Duplicate handler declared in the same block
int ER_SP_NOT_VAR_ARG = 1414; //SQLSTATE: 42000 Message: OUT or INOUT argument %d for routine %s is not a variable or NEW pseudo-variable in BEFORE trigger
int ER_SP_NO_RETSET = 1415; //SQLSTATE: 0A000 Message: Not allowed to return a result set from a %s
int ER_CANT_CREATE_GEOMETRY_OBJECT = 1416; //SQLSTATE: 22003 Message: Cannot get geometry object from data you send to the GEOMETRY field
int ER_FAILED_ROUTINE_BREAK_BINLOG = 1417; //SQLSTATE: HY000 Message: A routine failed and has neither NO SQL nor READS SQL DATA in its declaration and binary logging is enabled; if non-transactional tables were updated, the binary log will miss their changes
int ER_BINLOG_UNSAFE_ROUTINE = 1418; //SQLSTATE: HY000 Message: This function has none of DETERMINISTIC, NO SQL, or READS SQL DATA in its declaration and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
int ER_BINLOG_CREATE_ROUTINE_NEED_SUPER = 1419; //SQLSTATE: HY000 Message: You do not have the SUPER privilege and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
int ER_EXEC_STMT_WITH_OPEN_CURSOR = 1420; //SQLSTATE: HY000 Message: You can't execute a prepared statement which has an open cursor associated with it. Reset the statement to re-execute it.
int ER_STMT_HAS_NO_OPEN_CURSOR = 1421; //SQLSTATE: HY000 Message: The statement (%lu) has no open cursor.
int ER_COMMIT_NOT_ALLOWED_IN_SF_OR_TRG = 1422; //SQLSTATE: HY000 Message: Explicit or implicit commit is not allowed in stored function or trigger.
int ER_NO_DEFAULT_FOR_VIEW_FIELD = 1423; //SQLSTATE: HY000 Message: Field of view '%s.%s' underlying table doesn't have a default value
int ER_SP_NO_RECURSION = 1424; //SQLSTATE: HY000 Message: Recursive stored functions and triggers are not allowed.
int ER_TOO_BIG_SCALE = 1425; //SQLSTATE: 42000 Message: Too big scale %d specified for column '%s'. Maximum is %lu.
int ER_TOO_BIG_PRECISION = 1426; //SQLSTATE: 42000 Message: Too big precision %d specified for column '%s'. Maximum is %lu.
int ER_M_BIGGER_THAN_D = 1427; //SQLSTATE: 42000 Message: For float(M,D), double(M,D) or decimal(M,D), M must be >= D (column '%s').
int ER_WRONG_LOCK_OF_SYSTEM_TABLE = 1428; //SQLSTATE: HY000 Message: You can't combine write-locking of system tables with other tables or lock types
int ER_CONNECT_TO_FOREIGN_DATA_SOURCE = 1429; //SQLSTATE: HY000 Message: Unable to connect to foreign data source: %s
int ER_QUERY_ON_FOREIGN_DATA_SOURCE = 1430; //SQLSTATE: HY000 Message: There was a problem processing the query on the foreign data source. Data source error: %s
int ER_FOREIGN_DATA_SOURCE_DOESNT_EXIST = 1431; //SQLSTATE: HY000 Message: The foreign data source you are trying to reference does not exist. Data source error: %s
int ER_FOREIGN_DATA_STRING_INVALID_CANT_CREATE = 1432; //SQLSTATE: HY000 Message: Can't create federated table. The data source connection string '%s' is not in the correct format
int ER_FOREIGN_DATA_STRING_INVALID = 1433; //SQLSTATE: HY000 Message: The data source connection string '%s' is not in the correct format
int ER_CANT_CREATE_FEDERATED_TABLE = 1434; //SQLSTATE: HY000 Message: Can't create federated table. Foreign data src error: %s
int ER_TRG_IN_WRONG_SCHEMA = 1435; //SQLSTATE: HY000 Message: Trigger in wrong schema
int ER_STACK_OVERRUN_NEED_MORE = 1436; //SQLSTATE: HY000 Message: Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Use 'mysqld --thread_stack=#' to specify a bigger stack.
int ER_TOO_LONG_BODY = 1437; //SQLSTATE: 42000 Message: Routine body for '%s' is too long
int ER_WARN_CANT_DROP_DEFAULT_KEYCACHE = 1438; //SQLSTATE: HY000 Message: Cannot drop default keycache
int ER_TOO_BIG_DISPLAYWIDTH = 1439; //SQLSTATE: 42000 Message: Display width out of range for column '%s' (max = %lu)
int ER_XAER_DUPID = 1440; //SQLSTATE: XAE08 Message: XAER_DUPID: The XID already exists
int ER_DATETIME_FUNCTION_OVERFLOW = 1441; //SQLSTATE: 22008 Message: Datetime function: %s field overflow
int ER_CANT_UPDATE_USED_TABLE_IN_SF_OR_TRG = 1442; //SQLSTATE: HY000 Message: Can't update table '%s' in stored function/trigger because it is already used by statement which invoked this stored function/trigger.
int ER_VIEW_PREVENT_UPDATE = 1443; //SQLSTATE: HY000 Message: The definition of table '%s' prevents operation %s on table '%s'.
int ER_PS_NO_RECURSION = 1444; //SQLSTATE: HY000 Message: The prepared statement contains a stored routine call that refers to that same statement. It's not allowed to execute a prepared statement in such a recursive manner
int ER_SP_CANT_SET_AUTOCOMMIT = 1445; //SQLSTATE: HY000 Message: Not allowed to set autocommit from a stored function or trigger
int ER_MALFORMED_DEFINER = 1446; //SQLSTATE: HY000 Message: Definer is not fully qualified
int ER_VIEW_FRM_NO_USER = 1447; //SQLSTATE: HY000 Message: View '%s'.'%s' has no definer information (old table format). Current user is used as definer. Please recreate the view!
int ER_VIEW_OTHER_USER = 1448; //SQLSTATE: HY000 Message: You need the SUPER privilege for creation view with '%s'@'%s' definer
int ER_NO_SUCH_USER = 1449; //SQLSTATE: HY000 Message: The user specified as a definer ('%s'@'%s') does not exist
int ER_FORBID_SCHEMA_CHANGE = 1450; //SQLSTATE: HY000 Message: Changing schema from '%s' to '%s' is not allowed.
int ER_ROW_IS_REFERENCED_2 = 1451; //SQLSTATE: 23000 Message: Cannot delete or update a parent row: a foreign key constraint fails (%s)
int ER_NO_REFERENCED_ROW_2 = 1452; //SQLSTATE: 23000 Message: Cannot add or update a child row: a foreign key constraint fails (%s)
int ER_SP_BAD_VAR_SHADOW = 1453; //SQLSTATE: 42000 Message: Variable '%s' must be quoted with `...`, or renamed
int ER_TRG_NO_DEFINER = 1454; //SQLSTATE: HY000 Message: No definer attribute for trigger '%s'.'%s'. The trigger will be activated under the authorization of the invoker, which may have insufficient privileges. Please recreate the trigger.
int ER_OLD_FILE_FORMAT = 1455; //SQLSTATE: HY000 Message: '%s' has an old format, you should re-create the '%s' object(s)
int ER_SP_RECURSION_LIMIT = 1456; //SQLSTATE: HY000 Message: Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %s
int ER_SP_PROC_TABLE_CORRUPT = 1457; //SQLSTATE: HY000 Message: Failed to load routine %s. The table mysql.proc is missing, corrupt, or contains bad data (internal code %d)
int ER_SP_WRONG_NAME = 1458; //SQLSTATE: 42000 Message: Incorrect routine name '%s'
int ER_TABLE_NEEDS_UPGRADE = 1459; //SQLSTATE: HY000 Message: Table upgrade required. Please do "REPAIR TABLE `%s`" or dump/reload to fix it!
int ER_SP_NO_AGGREGATE = 1460; //SQLSTATE: 42000 Message: AGGREGATE is not supported for stored functions
int ER_MAX_PREPARED_STMT_COUNT_REACHED = 1461; //SQLSTATE: 42000 Message: Can't create more than max_prepared_stmt_count statements (current value: %lu)
int ER_VIEW_RECURSIVE = 1462; //SQLSTATE: HY000 Message: `%s`.`%s` contains view recursion
int ER_NON_GROUPING_FIELD_USED = 1463; //SQLSTATE: 42000 Message: non-grouping field '%s' is used in %s clause
int ER_TABLE_CANT_HANDLE_SPKEYS = 1464; //SQLSTATE: HY000 Message: The used table type doesn't support SPATIAL indexes
int ER_NO_TRIGGERS_ON_SYSTEM_SCHEMA = 1465; //SQLSTATE: HY000 Message: Triggers can not be created on system tables
int ER_REMOVED_SPACES = 1466; //SQLSTATE: HY000 Message: Leading spaces are removed from name '%s'
int ER_AUTOINC_READ_FAILED = 1467; //SQLSTATE: HY000 Message: Failed to read auto-increment value from storage engine
int ER_USERNAME = 1468; //SQLSTATE: HY000 Message: user name
int ER_HOSTNAME = 1469; //SQLSTATE: HY000 Message: host name
int ER_WRONG_STRING_LENGTH = 1470; //SQLSTATE: HY000 Message: String '%s' is too long for %s (should be no longer than %d)
int ER_NON_INSERTABLE_TABLE = 1471; //SQLSTATE: HY000 Message: The target table %s of the %s is not insertable-into
int ER_ADMIN_WRONG_MRG_TABLE = 1472; //SQLSTATE: HY000 Message: Table '%s' is differently defined or of non-MyISAM type or doesn't exist
int ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT = 1473; //SQLSTATE: HY000 Message: Too high level of nesting for select
int ER_NAME_BECOMES_EMPTY = 1474; //SQLSTATE: HY000 Message: Name '%s' has become ''
int ER_AMBIGUOUS_FIELD_TERM = 1475; //SQLSTATE: HY000 Message: First character of the FIELDS TERMINATED string is ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY
int ER_FOREIGN_SERVER_EXISTS = 1476; //SQLSTATE: HY000 Message: The foreign server, %s, you are trying to create already exists.
int ER_FOREIGN_SERVER_DOESNT_EXIST = 1477; //SQLSTATE: HY000 Message: The foreign server name you are trying to reference does not exist. Data source error: %s
int ER_ILLEGAL_HA_CREATE_OPTION = 1478; //SQLSTATE: HY000 Message: Table storage engine '%s' does not support the create option '%s'
int ER_PARTITION_REQUIRES_VALUES_ERROR = 1479; //SQLSTATE: HY000 Message: Syntax error: %s PARTITIONING requires definition of VALUES %s for each partition
int ER_PARTITION_WRONG_VALUES_ERROR = 1480; //SQLSTATE: HY000 Message: Only %s PARTITIONING can use VALUES %s in partition definition
int ER_PARTITION_MAXVALUE_ERROR = 1481; //SQLSTATE: HY000 Message: MAXVALUE can only be used in last partition definition
int ER_PARTITION_SUBPARTITION_ERROR = 1482; //SQLSTATE: HY000 Message: Subpartitions can only be hash partitions and by key
int ER_PARTITION_SUBPART_MIX_ERROR = 1483; //SQLSTATE: HY000 Message: Must define subpartitions on all partitions if on one partition
int ER_PARTITION_WRONG_NO_PART_ERROR = 1484; //SQLSTATE: HY000 Message: Wrong number of partitions defined, mismatch with previous setting
int ER_PARTITION_WRONG_NO_SUBPART_ERROR = 1485; //SQLSTATE: HY000 Message: Wrong number of subpartitions defined, mismatch with previous setting
int ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR = 1486; //SQLSTATE: HY000 Message: Constant, random or timezone-dependent expressions in (sub)partitioning function are not allowed
int ER_NO_CONST_EXPR_IN_RANGE_OR_LIST_ERROR = 1487; //SQLSTATE: HY000 Message: Expression in RANGE/LIST VALUES must be constant
int ER_FIELD_NOT_FOUND_PART_ERROR = 1488; //SQLSTATE: HY000 Message: Field in list of fields for partition function not found in table
int ER_LIST_OF_FIELDS_ONLY_IN_HASH_ERROR = 1489; //SQLSTATE: HY000 Message: List of fields is only allowed in KEY partitions
int ER_INCONSISTENT_PARTITION_INFO_ERROR = 1490; //SQLSTATE: HY000 Message: The partition info in the frm file is not consistent with what can be written into the frm file
int ER_PARTITION_FUNC_NOT_ALLOWED_ERROR = 1491; //SQLSTATE: HY000 Message: The %s function returns the wrong type
int ER_PARTITIONS_MUST_BE_DEFINED_ERROR = 1492; //SQLSTATE: HY000 Message: For %s partitions each partition must be defined
int ER_RANGE_NOT_INCREASING_ERROR = 1493; //SQLSTATE: HY000 Message: VALUES LESS THAN value must be strictly increasing for each partition
int ER_INCONSISTENT_TYPE_OF_FUNCTIONS_ERROR = 1494; //SQLSTATE: HY000 Message: VALUES value must be of same type as partition function
int ER_MULTIPLE_DEF_CONST_IN_LIST_PART_ERROR = 1495; //SQLSTATE: HY000 Message: Multiple definition of same constant in list partitioning
int ER_PARTITION_ENTRY_ERROR = 1496; //SQLSTATE: HY000 Message: Partitioning can not be used stand-alone in query
int ER_MIX_HANDLER_ERROR = 1497; //SQLSTATE: HY000 Message: The mix of handlers in the partitions is not allowed in this version of MySQL
int ER_PARTITION_NOT_DEFINED_ERROR = 1498; //SQLSTATE: HY000 Message: For the partitioned engine it is necessary to define all %s
int ER_TOO_MANY_PARTITIONS_ERROR = 1499; //SQLSTATE: HY000 Message: Too many partitions (including subpartitions) were defined
int ER_SUBPARTITION_ERROR = 1500; //SQLSTATE: HY000 Message: It is only possible to mix RANGE/LIST partitioning with HASH/KEY partitioning for subpartitioning
int ER_CANT_CREATE_HANDLER_FILE = 1501; //SQLSTATE: HY000 Message: Failed to create specific handler file
int ER_BLOB_FIELD_IN_PART_FUNC_ERROR = 1502; //SQLSTATE: HY000 Message: A BLOB field is not allowed in partition function
int ER_UNIQUE_KEY_NEED_ALL_FIELDS_IN_PF = 1503; //SQLSTATE: HY000 Message: A %s must include all columns in the table's partitioning function
int ER_NO_PARTS_ERROR = 1504; //SQLSTATE: HY000 Message: Number of %s = 0 is not an allowed value
int ER_PARTITION_MGMT_ON_NONPARTITIONED = 1505; //SQLSTATE: HY000 Message: Partition management on a not partitioned table is not possible
int ER_FOREIGN_KEY_ON_PARTITIONED = 1506; //SQLSTATE: HY000 Message: Foreign key clause is not yet supported in conjunction with partitioning
int ER_DROP_PARTITION_NON_EXISTENT = 1507; //SQLSTATE: HY000 Message: Error in list of partitions to %s
int ER_DROP_LAST_PARTITION = 1508; //SQLSTATE: HY000 Message: Cannot remove all partitions, use DROP TABLE instead
int ER_COALESCE_ONLY_ON_HASH_PARTITION = 1509; //SQLSTATE: HY000 Message: COALESCE PARTITION can only be used on HASH/KEY partitions
int ER_REORG_HASH_ONLY_ON_SAME_NO = 1510; //SQLSTATE: HY000 Message: REORGANIZE PARTITION can only be used to reorganize partitions not to change their numbers
int ER_REORG_NO_PARAM_ERROR = 1511; //SQLSTATE: HY000 Message: REORGANIZE PARTITION without parameters can only be used on auto-partitioned tables using HASH PARTITIONs
int ER_ONLY_ON_RANGE_LIST_PARTITION = 1512; //SQLSTATE: HY000 Message: %s PARTITION can only be used on RANGE/LIST partitions
int ER_ADD_PARTITION_SUBPART_ERROR = 1513; //SQLSTATE: HY000 Message: Trying to Add partition(s) with wrong number of subpartitions
int ER_ADD_PARTITION_NO_NEW_PARTITION = 1514; //SQLSTATE: HY000 Message: At least one partition must be added
int ER_COALESCE_PARTITION_NO_PARTITION = 1515; //SQLSTATE: HY000 Message: At least one partition must be coalesced
int ER_REORG_PARTITION_NOT_EXIST = 1516; //SQLSTATE: HY000 Message: More partitions to reorganize than there are partitions
int ER_SAME_NAME_PARTITION = 1517; //SQLSTATE: HY000 Message: Duplicate partition name %s
int ER_NO_BINLOG_ERROR = 1518; //SQLSTATE: HY000 Message: It is not allowed to shut off binlog on this command
int ER_CONSECUTIVE_REORG_PARTITIONS = 1519; //SQLSTATE: HY000 Message: When reorganizing a set of partitions they must be in consecutive order
int ER_REORG_OUTSIDE_RANGE = 1520; //SQLSTATE: HY000 Message: Reorganize of range partitions cannot change total ranges except for last partition where it can extend the range
int ER_PARTITION_FUNCTION_FAILURE = 1521; //SQLSTATE: HY000 Message: Partition function not supported in this version for this handler
int ER_PART_STATE_ERROR = 1522; //SQLSTATE: HY000 Message: Partition state cannot be defined from CREATE/ALTER TABLE
int ER_LIMITED_PART_RANGE = 1523; //SQLSTATE: HY000 Message: The %s handler only supports 32 bit integers in VALUES
int ER_PLUGIN_IS_NOT_LOADED = 1524; //SQLSTATE: HY000 Message: Plugin '%s' is not loaded
int ER_WRONG_VALUE = 1525; //SQLSTATE: HY000 Message: Incorrect %s value: '%s'
int ER_NO_PARTITION_FOR_GIVEN_VALUE = 1526; //SQLSTATE: HY000 Message: Table has no partition for value %s
int ER_FILEGROUP_OPTION_ONLY_ONCE = 1527; //SQLSTATE: HY000 Message: It is not allowed to specify %s more than once
int ER_CREATE_FILEGROUP_FAILED = 1528; //SQLSTATE: HY000 Message: Failed to create %s
int ER_DROP_FILEGROUP_FAILED = 1529; //SQLSTATE: HY000 Message: Failed to drop %s
int ER_TABLESPACE_AUTO_EXTEND_ERROR = 1530; //SQLSTATE: HY000 Message: The handler doesn't support autoextend of tablespaces
int ER_WRONG_SIZE_NUMBER = 1531; //SQLSTATE: HY000 Message: A size parameter was incorrectly specified, either number or on the form 10M
int ER_SIZE_OVERFLOW_ERROR = 1532; //SQLSTATE: HY000 Message: The size number was correct but we don't allow the digit part to be more than 2 billion
int ER_ALTER_FILEGROUP_FAILED = 1533; //SQLSTATE: HY000 Message: Failed to alter: %s
int ER_BINLOG_ROW_LOGGING_FAILED = 1534; //SQLSTATE: HY000 Message: Writing one row to the row-based binary log failed
int ER_BINLOG_ROW_WRONG_TABLE_DEF = 1535; //SQLSTATE: HY000 Message: Table definition on master and slave does not match: %s
int ER_BINLOG_ROW_RBR_TO_SBR = 1536; //SQLSTATE: HY000 Message: Slave running with --log-slave-updates must use row-based binary logging to be able to replicate row-based binary log events
int ER_EVENT_ALREADY_EXISTS = 1537; //SQLSTATE: HY000 Message: Event '%s' already exists
int ER_EVENT_STORE_FAILED = 1538; //SQLSTATE: HY000 Message: Failed to store event %s. Error code %d from storage engine.
int ER_EVENT_DOES_NOT_EXIST = 1539; //SQLSTATE: HY000 Message: Unknown event '%s'
int ER_EVENT_CANT_ALTER = 1540; //SQLSTATE: HY000 Message: Failed to alter event '%s'
int ER_EVENT_DROP_FAILED = 1541; //SQLSTATE: HY000 Message: Failed to drop %s
int ER_EVENT_INTERVAL_NOT_POSITIVE_OR_TOO_BIG = 1542; //SQLSTATE: HY000 Message: INTERVAL is either not positive or too big
int ER_EVENT_ENDS_BEFORE_STARTS = 1543; //SQLSTATE: HY000 Message: ENDS is either invalid or before STARTS
int ER_EVENT_EXEC_TIME_IN_THE_PAST = 1544; //SQLSTATE: HY000 Message: Event execution time is in the past. Event has been disabled
int ER_EVENT_OPEN_TABLE_FAILED = 1545; //SQLSTATE: HY000 Message: Failed to open mysql.event
int ER_EVENT_NEITHER_M_EXPR_NOR_M_AT = 1546; //SQLSTATE: HY000 Message: No datetime expression provided
int ER_COL_COUNT_DOESNT_MATCH_CORRUPTED = 1547; //SQLSTATE: HY000 Message: Column count of mysql.%s is wrong. Expected %d, found %d. The table is probably corrupted
int ER_CANNOT_LOAD_FROM_TABLE = 1548; //SQLSTATE: HY000 Message: Cannot load from mysql.%s. The table is probably corrupted
int ER_EVENT_CANNOT_DELETE = 1549; //SQLSTATE: HY000 Message: Failed to delete the event from mysql.event
int ER_EVENT_COMPILE_ERROR = 1550; //SQLSTATE: HY000 Message: Error during compilation of event's body
int ER_EVENT_SAME_NAME = 1551; //SQLSTATE: HY000 Message: Same old and new event name
int ER_EVENT_DATA_TOO_LONG = 1552; //SQLSTATE: HY000 Message: Data for column '%s' too long
int ER_DROP_INDEX_FK = 1553; //SQLSTATE: HY000 Message: Cannot drop index '%s': needed in a foreign key constraint
int ER_WARN_DEPRECATED_SYNTAX_WITH_VER = 1554; //SQLSTATE: HY000 Message: The syntax '%s' is deprecated and will be removed in MySQL %s. Please use %s instead
int ER_CANT_WRITE_LOCK_LOG_TABLE = 1555; //SQLSTATE: HY000 Message: You can't write-lock a log table. Only read access is possible
int ER_CANT_LOCK_LOG_TABLE = 1556; //SQLSTATE: HY000 Message: You can't use locks with log tables.
int ER_FOREIGN_DUPLICATE_KEY = 1557; //SQLSTATE: 23000 Message: Upholding foreign key constraints for table '%s', entry '%s', key %d would lead to a duplicate entry
int ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE = 1558; //SQLSTATE: HY000 Message: Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error.
int ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR = 1559; //SQLSTATE: HY000 Message: Cannot switch out of the row-based binary log format when the session has open temporary tables
int ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_FORMAT = 1560; //SQLSTATE: HY000 Message: Cannot change the binary logging format inside a stored function or trigger
int ER_NDB_CANT_SWITCH_BINLOG_FORMAT = 1561; //SQLSTATE: HY000 Message: The NDB cluster engine does not support changing the binlog format on the fly yet
int ER_PARTITION_NO_TEMPORARY = 1562; //SQLSTATE: HY000 Message: Cannot create temporary table with partitions
int ER_PARTITION_CONST_DOMAIN_ERROR = 1563; //SQLSTATE: HY000 Message: Partition constant is out of partition function domain
int ER_PARTITION_FUNCTION_IS_NOT_ALLOWED = 1564; //SQLSTATE: HY000 Message: This partition function is not allowed
int ER_DDL_LOG_ERROR = 1565; //SQLSTATE: HY000 Message: Error in DDL log
int ER_NULL_IN_VALUES_LESS_THAN = 1566; //SQLSTATE: HY000 Message: Not allowed to use NULL value in VALUES LESS THAN
int ER_WRONG_PARTITION_NAME = 1567; //SQLSTATE: HY000 Message: Incorrect partition name
int ER_CANT_CHANGE_TX_ISOLATION = 1568; //SQLSTATE: 25001 Message: Transaction isolation level can't be changed while a transaction is in progress
int ER_DUP_ENTRY_AUTOINCREMENT_CASE = 1569; //SQLSTATE: HY000 Message: ALTER TABLE causes auto_increment resequencing, resulting in duplicate entry '%s' for key '%s'
int ER_EVENT_MODIFY_QUEUE_ERROR = 1570; //SQLSTATE: HY000 Message: Internal scheduler error %d
int ER_EVENT_SET_VAR_ERROR = 1571; //SQLSTATE: HY000 Message: Error during starting/stopping of the scheduler. Error code %u
int ER_PARTITION_MERGE_ERROR = 1572; //SQLSTATE: HY000 Message: Engine cannot be used in partitioned tables
int ER_CANT_ACTIVATE_LOG = 1573; //SQLSTATE: HY000 Message: Cannot activate '%s' log
int ER_RBR_NOT_AVAILABLE = 1574; //SQLSTATE: HY000 Message: The server was not built with row-based replication
int ER_BASE64_DECODE_ERROR = 1575; //SQLSTATE: HY000 Message: Decoding of base64 string failed
int ER_EVENT_RECURSION_FORBIDDEN = 1576; //SQLSTATE: HY000 Message: Recursion of EVENT DDL statements is forbidden when body is present
int ER_EVENTS_DB_ERROR = 1577; //SQLSTATE: HY000 Message: Cannot proceed because system tables used by Event Scheduler were found damaged at server start
int ER_ONLY_INTEGERS_ALLOWED = 1578; //SQLSTATE: HY000 Message: Only integers allowed as number here
int ER_UNSUPORTED_LOG_ENGINE = 1579; //SQLSTATE: HY000 Message: This storage engine cannot be used for log tables"
int ER_BAD_LOG_STATEMENT = 1580; //SQLSTATE: HY000 Message: You cannot '%s' a log table if logging is enabled
int ER_CANT_RENAME_LOG_TABLE = 1581; //SQLSTATE: HY000 Message: Cannot rename '%s'. When logging enabled, rename to/from log table must rename two tables: the log table to an archive table and another table back to '%s'
int ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT = 1582; //SQLSTATE: 42000 Message: Incorrect parameter count in the call to native function '%s'
int ER_WRONG_PARAMETERS_TO_NATIVE_FCT = 1583; //SQLSTATE: 42000 Message: Incorrect parameters in the call to native function '%s'
int ER_WRONG_PARAMETERS_TO_STORED_FCT = 1584; //SQLSTATE: 42000 Message: Incorrect parameters in the call to stored function '%s'
int ER_NATIVE_FCT_NAME_COLLISION = 1585; //SQLSTATE: HY000 Message: This function '%s' has the same name as a native function
int ER_DUP_ENTRY_WITH_KEY_NAME = 1586; //SQLSTATE: 23000 Message: Duplicate entry '%s' for key '%s'
int ER_BINLOG_PURGE_EMFILE = 1587; //SQLSTATE: HY000 Message: Too many files opened, please execute the command again
int ER_EVENT_CANNOT_CREATE_IN_THE_PAST = 1588; //SQLSTATE: HY000 Message: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation.
int ER_EVENT_CANNOT_ALTER_IN_THE_PAST = 1589; //SQLSTATE: HY000 Message: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation.
int ER_SLAVE_INCIDENT = 1590; //SQLSTATE: HY000 Message: The incident %s occured on the master. Message: %s
int ER_NO_PARTITION_FOR_GIVEN_VALUE_SILENT = 1591; //SQLSTATE: HY000 Message: Table has no partition for some existing values
int ER_BINLOG_UNSAFE_STATEMENT = 1592; //SQLSTATE: HY000 Message: Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. %s
int ER_SLAVE_FATAL_ERROR = 1593; //SQLSTATE: HY000 Message: Fatal error: %s
int ER_SLAVE_RELAY_LOG_READ_FAILURE = 1594; //SQLSTATE: HY000 Message: Relay log read failure: %s
int ER_SLAVE_RELAY_LOG_WRITE_FAILURE = 1595; //SQLSTATE: HY000 Message: Relay log write failure: %s
int ER_SLAVE_CREATE_EVENT_FAILURE = 1596; //SQLSTATE: HY000 Message: Failed to create %s
int ER_SLAVE_MASTER_COM_FAILURE = 1597; //SQLSTATE: HY000 Message: Master command %s failed: %s
int ER_BINLOG_LOGGING_IMPOSSIBLE = 1598; //SQLSTATE: HY000 Message: Binary logging not possible. Message: %s
int ER_VIEW_NO_CREATION_CTX = 1599; //SQLSTATE: HY000 Message: View `%s`.`%s` has no creation context
int ER_VIEW_INVALID_CREATION_CTX = 1600; //SQLSTATE: HY000 Message: Creation context of view `%s`.`%s' is invalid
int ER_SR_INVALID_CREATION_CTX = 1601; //SQLSTATE: HY000 Message: Creation context of stored routine `%s`.`%s` is invalid
int ER_TRG_CORRUPTED_FILE = 1602; //SQLSTATE: HY000 Message: Corrupted TRG file for table `%s`.`%s`
int ER_TRG_NO_CREATION_CTX = 1603; //SQLSTATE: HY000 Message: Triggers for table `%s`.`%s` have no creation context
int ER_TRG_INVALID_CREATION_CTX = 1604; //SQLSTATE: HY000 Message: Trigger creation context of table `%s`.`%s` is invalid
int ER_EVENT_INVALID_CREATION_CTX = 1605; //SQLSTATE: HY000 Message: Creation context of event `%s`.`%s` is invalid
int ER_TRG_CANT_OPEN_TABLE = 1606; //SQLSTATE: HY000 Message: Cannot open table for trigger `%s`.`%s`
int ER_CANT_CREATE_SROUTINE = 1607; //SQLSTATE: HY000 Message: Cannot create stored routine `%s`. Check warnings
int ER_NEVER_USED = 1608; //SQLSTATE: HY000 Message: Ambiguous slave modes combination. %s
int ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENT = 1609; //SQLSTATE: HY000 Message: The BINLOG statement of type `%s` was not preceded by a format description BINLOG statement.
int ER_SLAVE_CORRUPT_EVENT = 1610; //SQLSTATE: HY000 Message: Corrupted replication event was detected
int ER_LOAD_DATA_INVALID_COLUMN = 1611; //SQLSTATE: HY000 Message: Invalid column reference (%s) in LOAD DATA
int ER_LOG_PURGE_NO_FILE = 1612; //SQLSTATE: HY000 Message: Being purged log %s was not found
int ER_XA_RBTIMEOUT = 1613; //SQLSTATE: XA106 Message: XA_RBTIMEOUT: Transaction branch was rolled back: took too long
int ER_XA_RBDEADLOCK = 1614; //SQLSTATE: XA102 Message: XA_RBDEADLOCK: Transaction branch was rolled back: deadlock was detected
int ER_NEED_REPREPARE = 1615; //SQLSTATE: HY000 Message: Prepared statement needs to be re-prepared
int ER_DELAYED_NOT_SUPPORTED = 1616; //SQLSTATE: HY000 Message: DELAYED option not supported for table '%s'
int WARN_NO_MASTER_INFO = 1617; //SQLSTATE: HY000 Message: The master info structure does not exist
int WARN_OPTION_IGNORED = 1618; //SQLSTATE: HY000 Message: <%s> option ignored
int WARN_PLUGIN_DELETE_BUILTIN = 1619; //SQLSTATE: HY000 Message: Built-in plugins cannot be deleted
int WARN_PLUGIN_BUSY = 1620; //SQLSTATE: HY000 Message: Plugin is busy and will be uninstalled on shutdown
int ER_VARIABLE_IS_READONLY = 1621; //SQLSTATE: HY000 Message: %s variable '%s' is read-only. Use SET %s to assign the value
int ER_WARN_ENGINE_TRANSACTION_ROLLBACK = 1622; //SQLSTATE: HY000 Message: Storage engine %s does not support rollback for this statement. Transaction rolled back and must be restarted
int ER_SLAVE_HEARTBEAT_FAILURE = 1623; //SQLSTATE: HY000 Message: Unexpected master's heartbeat data: %s
int ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE = 1624; //SQLSTATE: HY000 Message: The requested value for the heartbeat period is either negative or exceeds the maximum allowed (%s seconds).
int ER_NDB_REPLICATION_SCHEMA_ERROR = 1625; //SQLSTATE: HY000 Message: Bad schema for mysql.ndb_replication table. Message: %s
int ER_CONFLICT_FN_PARSE_ERROR = 1626; //SQLSTATE: HY000 Message: Error in parsing conflict function. Message: %s
int ER_EXCEPTIONS_WRITE_ERROR = 1627; //SQLSTATE: HY000 Message: Write to exceptions table failed. Message: %s"
int ER_TOO_LONG_TABLE_COMMENT = 1628; //SQLSTATE: HY000 Message: Comment for table '%s' is too long (max = %lu)
int ER_TOO_LONG_FIELD_COMMENT = 1629; //SQLSTATE: HY000 Message: Comment for field '%s' is too long (max = %lu)
int ER_FUNC_INEXISTENT_NAME_COLLISION = 1630; //SQLSTATE: 42000 Message: FUNCTION %s does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual
int ER_DATABASE_NAME = 1631; //SQLSTATE: HY000 Message: Database
int ER_TABLE_NAME = 1632; //SQLSTATE: HY000 Message: Table
int ER_PARTITION_NAME = 1633; //SQLSTATE: HY000 Message: Partition
int ER_SUBPARTITION_NAME = 1634; //SQLSTATE: HY000 Message: Subpartition
int ER_TEMPORARY_NAME = 1635; //SQLSTATE: HY000 Message: Temporary
int ER_RENAMED_NAME = 1636; //SQLSTATE: HY000 Message: Renamed
int ER_TOO_MANY_CONCURRENT_TRXS = 1637; //SQLSTATE: HY000 Message: Too many active concurrent transactions
int WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED = 1638; //SQLSTATE: HY000 Message: Non-ASCII separator arguments are not fully supported
int ER_DEBUG_SYNC_TIMEOUT = 1639; //SQLSTATE: HY000 Message: debug sync point wait timed out
int ER_DEBUG_SYNC_HIT_LIMIT = 1640; //SQLSTATE: HY000 Message: debug sync point hit limit reached
int ER_DUP_SIGNAL_SET = 1641; //SQLSTATE: 42000 Message: Duplicate condition information item '%s'
int ER_SIGNAL_WARN = 1642; //SQLSTATE: 01000 Message: Unhandled user-defined warning condition
int ER_SIGNAL_NOT_FOUND = 1643; //SQLSTATE: 02000 Message: Unhandled user-defined not found condition
int ER_SIGNAL_EXCEPTION = 1644; //SQLSTATE: HY000 Message: Unhandled user-defined exception condition
int ER_RESIGNAL_WITHOUT_ACTIVE_HANDLER = 1645; //SQLSTATE: 0K000 Message: RESIGNAL when handler not active
int ER_SIGNAL_BAD_CONDITION_TYPE = 1646; //SQLSTATE: HY000 Message: SIGNAL/RESIGNAL can only use a CONDITION defined with; //SQLSTATE
int WARN_COND_ITEM_TRUNCATED = 1647; //SQLSTATE: HY000 Message: Data truncated for condition item '%s'
int ER_COND_ITEM_TOO_LONG = 1648; //SQLSTATE: HY000 Message: Data too long for condition item '%s'
int ER_UNKNOWN_LOCALE = 1649; //SQLSTATE: HY000 Message: Unknown locale: '%s'
int ER_SLAVE_IGNORE_SERVER_IDS = 1650; //SQLSTATE: HY000 Message: The requested server id %d clashes with the slave startup option --replicate-same-server-id
int ER_QUERY_CACHE_DISABLED = 1651; //SQLSTATE: HY000 Message: Query cache is disabled; restart the server with query_cache_type=1 to enable it
int ER_SAME_NAME_PARTITION_FIELD = 1652; //SQLSTATE: HY000 Message: Duplicate partition field name '%s'
int ER_PARTITION_COLUMN_LIST_ERROR = 1653; //SQLSTATE: HY000 Message: Inconsistency in usage of column lists for partitioning
int ER_WRONG_TYPE_COLUMN_VALUE_ERROR = 1654; //SQLSTATE: HY000 Message: Partition column values of incorrect type
int ER_TOO_MANY_PARTITION_FUNC_FIELDS_ERROR = 1655; //SQLSTATE: HY000 Message: Too many fields in '%s'
int ER_MAXVALUE_IN_VALUES_IN = 1656; //SQLSTATE: HY000 Message: Cannot use MAXVALUE as value in VALUES IN
int ER_TOO_MANY_VALUES_ERROR = 1657; //SQLSTATE: HY000 Message: Cannot have more than one value for this type of %s partitioning
int ER_ROW_SINGLE_PARTITION_FIELD_ERROR = 1658; //SQLSTATE: HY000 Message: Row expressions in VALUES IN only allowed for multi-field column partitioning
int ER_FIELD_TYPE_NOT_ALLOWED_AS_PARTITION_FIELD = 1659; //SQLSTATE: HY000 Message: Field '%s' is of a not allowed type for this type of partitioning
int ER_PARTITION_FIELDS_TOO_LONG = 1660; //SQLSTATE: HY000 Message: The total length of the partitioning fields is too large
int ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE = 1661; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since both row-incapable engines and statement-incapable engines are involved.
int ER_BINLOG_ROW_MODE_AND_STMT_ENGINE = 1662; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-based logging.
int ER_BINLOG_UNSAFE_AND_STMT_ENGINE = 1663; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since statement is unsafe, storage engine is limited to statement-based logging, and BINLOG_FORMAT = MIXED. %s
int ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE = 1664; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since statement is in row format and at least one table uses a storage engine limited to statement-based logging.
int ER_BINLOG_STMT_MODE_AND_ROW_ENGINE = 1665; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging.%s
int ER_BINLOG_ROW_INJECTION_AND_STMT_MODE = 1666; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since statement is in row format and BINLOG_FORMAT = STATEMENT.
int ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE = 1667; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging.
int ER_BINLOG_UNSAFE_LIMIT = 1668; //SQLSTATE: HY000 Message: The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
int ER_BINLOG_UNSAFE_INSERT_DELAYED = 1669; //SQLSTATE: HY000 Message: The statement is unsafe because it uses INSERT DELAYED. This is unsafe because the times when rows are inserted cannot be predicted.
int ER_BINLOG_UNSAFE_SYSTEM_TABLE = 1670; //SQLSTATE: HY000 Message: The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
int ER_BINLOG_UNSAFE_AUTOINC_COLUMNS = 1671; //SQLSTATE: HY000 Message: Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly.
int ER_BINLOG_UNSAFE_UDF = 1672; //SQLSTATE: HY000 Message: Statement is unsafe because it uses a UDF which may not return the same value on the slave.
int ER_BINLOG_UNSAFE_SYSTEM_VARIABLE = 1673; //SQLSTATE: HY000 Message: Statement is unsafe because it uses a system variable that may have a different value on the slave.
int ER_BINLOG_UNSAFE_SYSTEM_FUNCTION = 1674; //SQLSTATE: HY000 Message: Statement is unsafe because it uses a system function that may return a different value on the slave.
int ER_BINLOG_UNSAFE_NONTRANS_AFTER_TRANS = 1675; //SQLSTATE: HY000 Message: Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
int ER_MESSAGE_AND_STATEMENT = 1676; //SQLSTATE: HY000 Message: %s Statement: %s
int ER_SLAVE_CONVERSION_FAILED = 1677; //SQLSTATE: HY000 Message: Column %d of table '%s.%s' cannot be converted from type '%s' to type '%s'
int ER_SLAVE_CANT_CREATE_CONVERSION = 1678; //SQLSTATE: HY000 Message: Can't create conversion table for table '%s.%s'
int ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_FORMAT = 1679; //SQLSTATE: HY000 Message: Cannot modify @@session.binlog_format inside a transaction
int ER_PATH_LENGTH = 1680; //SQLSTATE: HY000 Message: The path specified for %s is too long.
int ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT = 1681; //SQLSTATE: HY000 Message: The syntax '%s' is deprecated and will be removed in MySQL %s.
int ER_WRONG_NATIVE_TABLE_STRUCTURE = 1682; //SQLSTATE: HY000 Message: Native table '%s'.'%s' has the wrong structure
int ER_WRONG_PERFSCHEMA_USAGE = 1683; //SQLSTATE: HY000 Message: Invalid performance_schema usage.
int ER_WARN_I_S_SKIPPED_TABLE = 1684; //SQLSTATE: HY000 Message: Table '%s'.'%s' was skipped since its definition is being modified by concurrent DDL statement
int ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_DIRECT = 1685; //SQLSTATE: HY000 Message: Cannot modify @@session.binlog_direct_non_transactional_updates inside a transaction
int ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_DIRECT = 1686; //SQLSTATE: HY000 Message: Cannot change the binlog direct flag inside a stored function or trigger
int ER_SPATIAL_MUST_HAVE_GEOM_COL = 1687; //SQLSTATE: 42000 Message: A SPATIAL index may only contain a geometrical type column
int ER_TOO_LONG_INDEX_COMMENT = 1688; //SQLSTATE: HY000 Message: Comment for index '%s' is too long (max = %lu)
int ER_LOCK_ABORTED = 1689; //SQLSTATE: HY000 Message: Wait on a lock was aborted due to a pending exclusive lock
int ER_DATA_OUT_OF_RANGE = 1690; //SQLSTATE: 22003 Message: %s value is out of range in '%s'
int ER_WRONG_SPVAR_TYPE_IN_LIMIT = 1691; //SQLSTATE: HY000 Message: A variable of a non-integer type in LIMIT clause
int ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE = 1692; //SQLSTATE: HY000 Message: Mixing self-logging and non-self-logging engines in a statement is unsafe.
int ER_BINLOG_UNSAFE_MIXED_STATEMENT = 1693; //SQLSTATE: HY000 Message: Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
int ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SQL_LOG_BIN = 1694; //SQLSTATE: HY000 Message: Cannot modify @@session.sql_log_bin inside a transaction
int ER_STORED_FUNCTION_PREVENTS_SWITCH_SQL_LOG_BIN = 1695; //SQLSTATE: HY000 Message: Cannot change the sql_log_bin inside a stored function or trigger
int ER_FAILED_READ_FROM_PAR_FILE = 1696; //SQLSTATE: HY000 Message: Failed to read from the .par file
int ER_VALUES_IS_NOT_INT_TYPE_ERROR = 1697; //SQLSTATE: HY000 Message: VALUES value for partition '%s' must have type INT
int ER_ACCESS_DENIED_NO_PASSWORD_ERROR = 1698; //SQLSTATE: 28000 Message: Access denied for user '%s'@'%s'
int ER_SET_PASSWORD_AUTH_PLUGIN = 1699; //SQLSTATE: HY000 Message: SET PASSWORD has no significance for users authenticating via plugins
int ER_GRANT_PLUGIN_USER_EXISTS = 1700; //SQLSTATE: HY000 Message: GRANT with IDENTIFIED WITH is illegal because the user %-.*s already exists
int ER_TRUNCATE_ILLEGAL_FK = 1701; //SQLSTATE: 42000 Message: Cannot truncate a table referenced in a foreign key constraint (%s)
int ER_PLUGIN_IS_PERMANENT = 1702; //SQLSTATE: HY000 Message: Plugin '%s' is force_plus_permanent and can not be unloaded
int ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN = 1703; //SQLSTATE: HY000 Message: The requested value for the heartbeat period is less than 1 millisecond. The value is reset to 0, meaning that heartbeating will effectively be disabled.
int ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX = 1704; //SQLSTATE: HY000 Message: The requested value for the heartbeat period exceeds the value of `slave_net_timeout' seconds. A sensible value for the period should be less than the timeout.
int ER_STMT_CACHE_FULL = 1705; //SQLSTATE: HY000 Message: Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage; increase this mysqld variable and try again
int ER_MULTI_UPDATE_KEY_CONFLICT = 1706; //SQLSTATE: HY000 Message: Primary key/partition key update is not allowed since the table is updated both as '%s' and '%s'.
int ER_TABLE_NEEDS_REBUILD = 1707; //SQLSTATE: HY000 Message: Table rebuild required. Please do "ALTER TABLE `%s` FORCE" or dump/reload to fix it!
int WARN_OPTION_BELOW_LIMIT = 1708; //SQLSTATE: HY000 Message: The value of '%s' should be no less than the value of '%s'
int ER_INDEX_COLUMN_TOO_LONG = 1709; //SQLSTATE: HY000 Message: Index column size too large. The maximum column size is %lu bytes.
int ER_ERROR_IN_TRIGGER_BODY = 1710; //SQLSTATE: HY000 Message: Trigger '%s' has an error in its body: '%s'
int ER_ERROR_IN_UNKNOWN_TRIGGER_BODY = 1711; //SQLSTATE: HY000 Message: Unknown trigger has an error in its body: '%s'
int ER_INDEX_CORRUPT = 1712; //SQLSTATE: HY000 Message: Index %s is corrupted
int ER_UNDO_RECORD_TOO_BIG = 1713; //SQLSTATE: HY000 Message: Undo log record is too big.
int ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECT = 1714; //SQLSTATE: HY000 Message: INSERT IGNORE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
int ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATE = 1715; //SQLSTATE: HY000 Message: INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are updated. This order cannot be predicted and may differ on master and the slave.
int ER_BINLOG_UNSAFE_REPLACE_SELECT = 1716; //SQLSTATE: HY000 Message: REPLACE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave.
int ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECT = 1717; //SQLSTATE: HY000 Message: CREATE... IGNORE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
int ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECT = 1718; //SQLSTATE: HY000 Message: CREATE... REPLACE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave.
int ER_BINLOG_UNSAFE_UPDATE_IGNORE = 1719; //SQLSTATE: HY000 Message: UPDATE IGNORE is unsafe because the order in which rows are updated determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
int ER_PLUGIN_NO_UNINSTALL = 1720; //SQLSTATE: HY000 Message: Plugin '%s' is marked as not dynamically uninstallable. You have to stop the server to uninstall it.
int ER_PLUGIN_NO_INSTALL = 1721; //SQLSTATE: HY000 Message: Plugin '%s' is marked as not dynamically installable. You have to stop the server to install it.
int ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECT = 1722; //SQLSTATE: HY000 Message: Statements writing to a table with an auto-increment column after selecting from another table are unsafe because the order in which rows are retrieved determines what (if any) rows will be written. This order cannot be predicted and may differ on master and the slave.
int ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINC = 1723; //SQLSTATE: HY000 Message: CREATE TABLE... SELECT... on a table with an auto-increment column is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are inserted. This order cannot be predicted and may differ on master and the slave.
int ER_BINLOG_UNSAFE_INSERT_TWO_KEYS = 1724; //SQLSTATE: HY000 Message: INSERT... ON DUPLICATE KEY UPDATE on a table with more than one UNIQUE KEY is unsafe
int ER_TABLE_IN_FK_CHECK = 1725; //SQLSTATE: HY000 Message: Table is being used in foreign key check.
int ER_UNSUPPORTED_ENGINE = 1726; //SQLSTATE: HY000 Message: Storage engine '%s' does not support system tables. [%s.%s]
int ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRST = 1727; //SQLSTATE: HY000 Message: INSERT into autoincrement field which is not the first part in the composed primary key is unsafe.
int ER_CANNOT_LOAD_FROM_TABLE_V2 = 1728; //SQLSTATE: HY000 Message: Cannot load from %s.%s. The table is probably corrupted
int ER_MASTER_DELAY_VALUE_OUT_OF_RANGE = 1729; //SQLSTATE: HY000 Message: The requested value %u for the master delay exceeds the maximum %u
int ER_ONLY_FD_AND_RBR_EVENTS_ALLOWED_IN_BINLOG_STATEMENT = 1730; //SQLSTATE: HY000 Message: Only Format_description_log_event and row events are allowed in BINLOG statements (but %s was provided)
int ER_PARTITION_EXCHANGE_DIFFERENT_OPTION = 1731; //SQLSTATE: HY000 Message: Non matching attribute '%s' between partition and table
int ER_PARTITION_EXCHANGE_PART_TABLE = 1732; //SQLSTATE: HY000 Message: Table to exchange with partition is partitioned: '%s'
int ER_PARTITION_EXCHANGE_TEMP_TABLE = 1733; //SQLSTATE: HY000 Message: Table to exchange with partition is temporary: '%s'
int ER_PARTITION_INSTEAD_OF_SUBPARTITION = 1734; //SQLSTATE: HY000 Message: Subpartitioned table, use subpartition instead of partition
int ER_UNKNOWN_PARTITION = 1735; //SQLSTATE: HY000 Message: Unknown partition '%s' in table '%s'
int ER_TABLES_DIFFERENT_METADATA = 1736; //SQLSTATE: HY000 Message: Tables have different definitions
int ER_ROW_DOES_NOT_MATCH_PARTITION = 1737; //SQLSTATE: HY000 Message: Found a row that does not match the partition
int ER_BINLOG_CACHE_SIZE_GREATER_THAN_MAX = 1738; //SQLSTATE: HY000 Message: Option binlog_cache_size (%lu) is greater than max_binlog_cache_size (%lu); setting binlog_cache_size equal to max_binlog_cache_size.
int ER_WARN_INDEX_NOT_APPLICABLE = 1739; //SQLSTATE: HY000 Message: Cannot use %s access on index '%s' due to type or collation conversion on field '%s'
int ER_PARTITION_EXCHANGE_FOREIGN_KEY = 1740; //SQLSTATE: HY000 Message: Table to exchange with partition has foreign key references: '%s'
int ER_NO_SUCH_KEY_VALUE = 1741; //SQLSTATE: HY000 Message: Key value '%s' was not found in table '%s.%s'
int ER_RPL_INFO_DATA_TOO_LONG = 1742; //SQLSTATE: HY000 Message: Data for column '%s' too long
int ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE = 1743; //SQLSTATE: HY000 Message: Replication event checksum verification failed while reading from network.
int ER_BINLOG_READ_EVENT_CHECKSUM_FAILURE = 1744; //SQLSTATE: HY000 Message: Replication event checksum verification failed while reading from a log file.
int ER_BINLOG_STMT_CACHE_SIZE_GREATER_THAN_MAX = 1745; //SQLSTATE: HY000 Message: Option binlog_stmt_cache_size (%lu) is greater than max_binlog_stmt_cache_size (%lu); setting binlog_stmt_cache_size equal to max_binlog_stmt_cache_size.
int ER_CANT_UPDATE_TABLE_IN_CREATE_TABLE_SELECT = 1746; //SQLSTATE: HY000 Message: Can't update table '%s' while '%s' is being created.
int ER_PARTITION_CLAUSE_ON_NONPARTITIONED = 1747; //SQLSTATE: HY000 Message: PARTITION () clause on non partitioned table
int ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET = 1748; //SQLSTATE: HY000 Message: Found a row not matching the given partition set
int ER_NO_SUCH_PARTITION__UNUSED = 1749; //SQLSTATE: HY000 Message: partition '%s' doesn't exist
int ER_CHANGE_RPL_INFO_REPOSITORY_FAILURE = 1750; //SQLSTATE: HY000 Message: Failure while changing the type of replication repository: %s.
int ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_CREATED_TEMP_TABLE = 1751; //SQLSTATE: HY000 Message: The creation of some temporary tables could not be rolled back.
int ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_DROPPED_TEMP_TABLE = 1752; //SQLSTATE: HY000 Message: Some temporary tables were dropped, but these operations could not be rolled back.
int ER_MTS_FEATURE_IS_NOT_SUPPORTED = 1753; //SQLSTATE: HY000 Message: %s is not supported in multi-threaded slave mode. %s
int ER_MTS_UPDATED_DBS_GREATER_MAX = 1754; //SQLSTATE: HY000 Message: The number of modified databases exceeds the maximum %d; the database names will not be included in the replication event metadata.
int ER_MTS_CANT_PARALLEL = 1755; //SQLSTATE: HY000 Message: Cannot execute the current event group in the parallel mode. Encountered event %s, relay-log name %s, position %s which prevents execution of this event group in parallel mode. Reason: %s.
int ER_MTS_INCONSISTENT_DATA = 1756; //SQLSTATE: HY000 Message: %s
int ER_FULLTEXT_NOT_SUPPORTED_WITH_PARTITIONING = 1757; //SQLSTATE: HY000 Message: FULLTEXT index is not supported for partitioned tables.
int ER_DA_INVALID_CONDITION_NUMBER = 1758; //SQLSTATE: 35000 Message: Invalid condition number
int ER_INSECURE_PLAIN_TEXT = 1759; //SQLSTATE: HY000 Message: Sending passwords in plain text without SSL/TLS is extremely insecure.
int ER_INSECURE_CHANGE_MASTER = 1760; //SQLSTATE: HY000 Message: Storing MySQL user name or password information in the master.info repository is not secure and is therefore not recommended. Please see the MySQL Manual for more about this issue and possible alternatives.
int ER_FOREIGN_DUPLICATE_KEY_WITH_CHILD_INFO = 1761; //SQLSTATE: 23000 Message: Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in table '%s', key '%s'
int ER_FOREIGN_DUPLICATE_KEY_WITHOUT_CHILD_INFO = 1762; //SQLSTATE: 23000 Message: Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in a child table
int ER_SQLTHREAD_WITH_SECURE_SLAVE = 1763; //SQLSTATE: HY000 Message: Setting authentication options is not possible when only the Slave SQL Thread is being started.
int ER_TABLE_HAS_NO_FT = 1764; //SQLSTATE: HY000 Message: The table does not have FULLTEXT index to support this query
int ER_VARIABLE_NOT_SETTABLE_IN_SF_OR_TRIGGER = 1765; //SQLSTATE: HY000 Message: The system variable %s cannot be set in stored functions or triggers.
int ER_VARIABLE_NOT_SETTABLE_IN_TRANSACTION = 1766; //SQLSTATE: HY000 Message: The system variable %s cannot be set when there is an ongoing transaction.
int ER_GTID_NEXT_IS_NOT_IN_GTID_NEXT_LIST = 1767; //SQLSTATE: HY000 Message: The system variable @@SESSION.GTID_NEXT has the value %s, which is not listed in @@SESSION.GTID_NEXT_LIST.
int ER_CANT_CHANGE_GTID_NEXT_IN_TRANSACTION_WHEN_GTID_NEXT_LIST_IS_NULL = 1768; //SQLSTATE: HY000 Message: When @@SESSION.GTID_NEXT_LIST == NULL, the system variable @@SESSION.GTID_NEXT cannot change inside a transaction.
int ER_SET_STATEMENT_CANNOT_INVOKE_FUNCTION = 1769; //SQLSTATE: HY000 Message: The statement 'SET %s' cannot invoke a stored function.
int ER_GTID_NEXT_CANT_BE_AUTOMATIC_IF_GTID_NEXT_LIST_IS_NON_NULL = 1770; //SQLSTATE: HY000 Message: The system variable @@SESSION.GTID_NEXT cannot be 'AUTOMATIC' when @@SESSION.GTID_NEXT_LIST is non-NULL.
int ER_SKIPPING_LOGGED_TRANSACTION = 1771; //SQLSTATE: HY000 Message: Skipping transaction %s because it has already been executed and logged.
int ER_MALFORMED_GTID_SET_SPECIFICATION = 1772; //SQLSTATE: HY000 Message: Malformed GTID set specification '%s'.
int ER_MALFORMED_GTID_SET_ENCODING = 1773; //SQLSTATE: HY000 Message: Malformed GTID set encoding.
int ER_MALFORMED_GTID_SPECIFICATION = 1774; //SQLSTATE: HY000 Message: Malformed GTID specification '%s'.
int ER_GNO_EXHAUSTED = 1775; //SQLSTATE: HY000 Message: Impossible to generate Global Transaction Identifier: the integer component reached the maximal value. Restart the server with a new server_uuid.
int ER_BAD_SLAVE_AUTO_POSITION = 1776; //SQLSTATE: HY000 Message: Parameters MASTER_LOG_FILE, MASTER_LOG_POS, RELAY_LOG_FILE and RELAY_LOG_POS cannot be set when MASTER_AUTO_POSITION is active.
int ER_AUTO_POSITION_REQUIRES_GTID_MODE_ON = 1777; //SQLSTATE: HY000 Message: CHANGE MASTER TO MASTER_AUTO_POSITION = 1 can only be executed when GTID_MODE = ON.
int ER_CANT_DO_IMPLICIT_COMMIT_IN_TRX_WHEN_GTID_NEXT_IS_SET = 1778; //SQLSTATE: HY000 Message: Cannot execute statements with implicit commit inside a transaction when GTID_NEXT != AUTOMATIC or GTID_NEXT_LIST != NULL.
int ER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON = 1779; //SQLSTATE: HY000 Message: GTID_MODE = ON or GTID_MODE = UPGRADE_STEP_2 requires ENFORCE_GTID_CONSISTENCY = 1.
int ER_GTID_MODE_REQUIRES_BINLOG = 1780; //SQLSTATE: HY000 Message: GTID_MODE = ON or UPGRADE_STEP_1 or UPGRADE_STEP_2 requires --log-bin and --log-slave-updates.
int ER_CANT_SET_GTID_NEXT_TO_GTID_WHEN_GTID_MODE_IS_OFF = 1781; //SQLSTATE: HY000 Message: GTID_NEXT cannot be set to UUID:NUMBER when GTID_MODE = OFF.
int ER_CANT_SET_GTID_NEXT_TO_ANONYMOUS_WHEN_GTID_MODE_IS_ON = 1782; //SQLSTATE: HY000 Message: GTID_NEXT cannot be set to ANONYMOUS when GTID_MODE = ON.
int ER_CANT_SET_GTID_NEXT_LIST_TO_NON_NULL_WHEN_GTID_MODE_IS_OFF = 1783; //SQLSTATE: HY000 Message: GTID_NEXT_LIST cannot be set to a non-NULL value when GTID_MODE = OFF.
int ER_FOUND_GTID_EVENT_WHEN_GTID_MODE_IS_OFF = 1784; //SQLSTATE: HY000 Message: Found a Gtid_log_event or Previous_gtids_log_event when GTID_MODE = OFF.
int ER_GTID_UNSAFE_NON_TRANSACTIONAL_TABLE = 1785; //SQLSTATE: HY000 Message: When ENFORCE_GTID_CONSISTENCY = 1, updates to non-transactional tables can only be done in either autocommitted statements or single-statement transactions, and never in the same statement as updates to transactional tables.
int ER_GTID_UNSAFE_CREATE_SELECT = 1786; //SQLSTATE: HY000 Message: CREATE TABLE ... SELECT is forbidden when ENFORCE_GTID_CONSISTENCY = 1.
int ER_GTID_UNSAFE_CREATE_DROP_TEMPORARY_TABLE_IN_TRANSACTION = 1787; //SQLSTATE: HY000 Message: When ENFORCE_GTID_CONSISTENCY = 1, the statements CREATE TEMPORARY TABLE and DROP TEMPORARY TABLE can be executed in a non-transactional context only, and require that AUTOCOMMIT = 1.
int ER_GTID_MODE_CAN_ONLY_CHANGE_ONE_STEP_AT_A_TIME = 1788; //SQLSTATE: HY000 Message: The value of GTID_MODE can only change one step at a time: OFF <-> UPGRADE_STEP_1 <-> UPGRADE_STEP_2 <-> ON. Also note that this value must be stepped up or down simultaneously on all servers; see the Manual for instructions.
int ER_MASTER_HAS_PURGED_REQUIRED_GTIDS = 1789; //SQLSTATE: HY000 Message: The slave is connecting using CHANGE MASTER TO MASTER_AUTO_POSITION = 1, but the master has purged binary logs containing GTIDs that the slave requires.
int ER_CANT_SET_GTID_NEXT_WHEN_OWNING_GTID = 1790; //SQLSTATE: HY000 Message: GTID_NEXT cannot be changed by a client that owns a GTID. The client owns %s. Ownership is released on COMMIT or ROLLBACK.
int ER_UNKNOWN_EXPLAIN_FORMAT = 1791; //SQLSTATE: HY000 Message: Unknown EXPLAIN format name: '%s'
int ER_CANT_EXECUTE_IN_READ_ONLY_TRANSACTION = 1792; //SQLSTATE: 25006 Message: Cannot execute statement in a READ ONLY transaction.
int ER_TOO_LONG_TABLE_PARTITION_COMMENT = 1793; //SQLSTATE: HY000 Message: Comment for table partition '%s' is too long (max = %lu)
int ER_SLAVE_CONFIGURATION = 1794; //SQLSTATE: HY000 Message: Slave is not configured or failed to initialize properly. You must at least set --server-id to enable either a master or a slave. Additional error messages can be found in the MySQL error log.
int ER_INNODB_FT_LIMIT = 1795; //SQLSTATE: HY000 Message: InnoDB presently supports one FULLTEXT index creation at a time
int ER_INNODB_NO_FT_TEMP_TABLE = 1796; //SQLSTATE: HY000 Message: Cannot create FULLTEXT index on temporary InnoDB table
int ER_INNODB_FT_WRONG_DOCID_COLUMN = 1797; //SQLSTATE: HY000 Message: Column '%s' is of wrong type for an InnoDB FULLTEXT index
int ER_INNODB_FT_WRONG_DOCID_INDEX = 1798; //SQLSTATE: HY000 Message: Index '%s' is of wrong type for an InnoDB FULLTEXT index
int ER_INNODB_ONLINE_LOG_TOO_BIG = 1799; //SQLSTATE: HY000 Message: Creating index '%s' required more than 'innodb_online_alter_log_max_size' bytes of modification log. Please try again.
int ER_UNKNOWN_ALTER_ALGORITHM = 1800; //SQLSTATE: HY000 Message: Unknown ALGORITHM '%s'
int ER_UNKNOWN_ALTER_LOCK = 1801; //SQLSTATE: HY000 Message: Unknown LOCK type '%s'
int ER_MTS_CHANGE_MASTER_CANT_RUN_WITH_GAPS = 1802; //SQLSTATE: HY000 Message: CHANGE MASTER cannot be executed when the slave was stopped with an error or killed in MTS mode. Consider using RESET SLAVE or START SLAVE UNTIL.
int ER_MTS_RECOVERY_FAILURE = 1803; //SQLSTATE: HY000 Message: Cannot recover after SLAVE errored out in parallel execution mode. Additional error messages can be found in the MySQL error log.
int ER_MTS_RESET_WORKERS = 1804; //SQLSTATE: HY000 Message: Cannot clean up worker info tables. Additional error messages can be found in the MySQL error log.
int ER_COL_COUNT_DOESNT_MATCH_CORRUPTED_V2 = 1805; //SQLSTATE: HY000 Message: Column count of %s.%s is wrong. Expected %d, found %d. The table is probably corrupted
int ER_SLAVE_SILENT_RETRY_TRANSACTION = 1806; //SQLSTATE: HY000 Message: Slave must silently retry current transaction
int ER_DISCARD_FK_CHECKS_RUNNING = 1807; //SQLSTATE: HY000 Message: There is a foreign key check running on table '%s'. Cannot discard the table.
int ER_TABLE_SCHEMA_MISMATCH = 1808; //SQLSTATE: HY000 Message: Schema mismatch (%s)
int ER_TABLE_IN_SYSTEM_TABLESPACE = 1809; //SQLSTATE: HY000 Message: Table '%s' in system tablespace
int ER_IO_READ_ERROR = 1810; //SQLSTATE: HY000 Message: IO Read error: (%lu, %s) %s
int ER_IO_WRITE_ERROR = 1811; //SQLSTATE: HY000 Message: IO Write error: (%lu, %s) %s
int ER_TABLESPACE_MISSING = 1812; //SQLSTATE: HY000 Message: Tablespace is missing for table '%s'
int ER_TABLESPACE_EXISTS = 1813; //SQLSTATE: HY000 Message: Tablespace for table '%s' exists. Please DISCARD the tablespace before IMPORT.
int ER_TABLESPACE_DISCARDED = 1814; //SQLSTATE: HY000 Message: Tablespace has been discarded for table '%s'
int ER_INTERNAL_ERROR = 1815; //SQLSTATE: HY000 Message: Internal error: %s
int ER_INNODB_IMPORT_ERROR = 1816; //SQLSTATE: HY000 Message: ALTER TABLE '%s' IMPORT TABLESPACE failed with error %lu : '%s'
int ER_INNODB_INDEX_CORRUPT = 1817; //SQLSTATE: HY000 Message: Index corrupt: %s
int ER_INVALID_YEAR_COLUMN_LENGTH = 1818; //SQLSTATE: HY000 Message: YEAR(%lu) column type is deprecated. Creating YEAR(4) column instead.
int ER_NOT_VALID_PASSWORD = 1819; //SQLSTATE: HY000 Message: Your password does not satisfy the current policy requirements
int ER_MUST_CHANGE_PASSWORD = 1820; //SQLSTATE: HY000 Message: You must SET PASSWORD before executing this statement
int ER_FK_NO_INDEX_CHILD = 1821; //SQLSTATE: HY000 Message: Failed to add the foreign key constaint. Missing index for constraint '%s' in the foreign table '%s'
int ER_FK_NO_INDEX_PARENT = 1822; //SQLSTATE: HY000 Message: Failed to add the foreign key constaint. Missing index for constraint '%s' in the referenced table '%s'
int ER_FK_FAIL_ADD_SYSTEM = 1823; //SQLSTATE: HY000 Message: Failed to add the foreign key constraint '%s' to system tables
int ER_FK_CANNOT_OPEN_PARENT = 1824; //SQLSTATE: HY000 Message: Failed to open the referenced table '%s'
int ER_FK_INCORRECT_OPTION = 1825; //SQLSTATE: HY000 Message: Failed to add the foreign key constraint on table '%s'. Incorrect options in FOREIGN KEY constraint '%s'
int ER_FK_DUP_NAME = 1826; //SQLSTATE: HY000 Message: Duplicate foreign key constraint name '%s'
int ER_PASSWORD_FORMAT = 1827; //SQLSTATE: HY000 Message: The password hash doesn't have the expected format. Check if the correct password algorithm is being used with the PASSWORD() function.
int ER_FK_COLUMN_CANNOT_DROP = 1828; //SQLSTATE: HY000 Message: Cannot drop column '%s': needed in a foreign key constraint '%s'
int ER_FK_COLUMN_CANNOT_DROP_CHILD = 1829; //SQLSTATE: HY000 Message: Cannot drop column '%s': needed in a foreign key constraint '%s' of table '%s'
int ER_FK_COLUMN_NOT_NULL = 1830; //SQLSTATE: HY000 Message: Column '%s' cannot be NOT NULL: needed in a foreign key constraint '%s' SET NULL
int ER_DUP_INDEX = 1831; //SQLSTATE: HY000 Message: Duplicate index '%s' defined on the table '%s.%s'. This is deprecated and will be disallowed in a future release.
int ER_FK_COLUMN_CANNOT_CHANGE = 1832; //SQLSTATE: HY000 Message: Cannot change column '%s': used in a foreign key constraint '%s'
int ER_FK_COLUMN_CANNOT_CHANGE_CHILD = 1833; //SQLSTATE: HY000 Message: Cannot change column '%s': used in a foreign key constraint '%s' of table '%s'
int ER_FK_CANNOT_DELETE_PARENT = 1834; //SQLSTATE: HY000 Message: Cannot delete rows from table which is parent in a foreign key constraint '%s' of table '%s'
int ER_MALFORMED_PACKET = 1835; //SQLSTATE: HY000 Message: Malformed communication packet.
int ER_READ_ONLY_MODE = 1836; //SQLSTATE: HY000 Message: Running in read-only mode
int ER_GTID_NEXT_TYPE_UNDEFINED_GROUP = 1837; //SQLSTATE: HY000 Message: When GTID_NEXT is set to a GTID, you must explicitly set it again after a COMMIT or ROLLBACK. If you see this error message in the slave SQL thread, it means that a table in the current transaction is transactional on the master and non-transactional on the slave. In a client connection, it means that you executed SET GTID_NEXT before a transaction and forgot to set GTID_NEXT to a different identifier or to 'AUTOMATIC' after COMMIT or ROLLBACK. Current GTID_NEXT is '%s'.
int ER_VARIABLE_NOT_SETTABLE_IN_SP = 1838; //SQLSTATE: HY000 Message: The system variable %s cannot be set in stored procedures.
int ER_CANT_SET_GTID_PURGED_WHEN_GTID_MODE_IS_OFF = 1839; //SQLSTATE: HY000 Message: GTID_PURGED can only be set when GTID_MODE = ON.
int ER_CANT_SET_GTID_PURGED_WHEN_GTID_EXECUTED_IS_NOT_EMPTY = 1840; //SQLSTATE: HY000 Message: GTID_PURGED can only be set when GTID_EXECUTED is empty.
int ER_CANT_SET_GTID_PURGED_WHEN_OWNED_GTIDS_IS_NOT_EMPTY = 1841; //SQLSTATE: HY000 Message: GTID_PURGED can only be set when there are no ongoing transactions (not even in other clients).
int ER_GTID_PURGED_WAS_CHANGED = 1842; //SQLSTATE: HY000 Message: GTID_PURGED was changed from '%s' to '%s'.
int ER_GTID_EXECUTED_WAS_CHANGED = 1843; //SQLSTATE: HY000 Message: GTID_EXECUTED was changed from '%s' to '%s'.
int ER_BINLOG_STMT_MODE_AND_NO_REPL_TABLES = 1844; //SQLSTATE: HY000 Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT, and both replicated and non replicated tables are written to.
int ER_ALTER_OPERATION_NOT_SUPPORTED = 1845; //SQLSTATE: 0A000 Message: %s is not supported for this operation. Try %s.
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON = 1846; //SQLSTATE: 0A000 Message: %s is not supported. Reason: %s. Try %s.
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COPY = 1847; //SQLSTATE: HY000 Message: COPY algorithm requires a lock
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_PARTITION = 1848; //SQLSTATE: HY000 Message: Partition specific operations do not yet support LOCK/ALGORITHM
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_RENAME = 1849; //SQLSTATE: HY000 Message: Columns participating in a foreign key are renamed
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COLUMN_TYPE = 1850; //SQLSTATE: HY000 Message: Cannot change column type INPLACE
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_CHECK = 1851; //SQLSTATE: HY000 Message: Adding foreign keys needs foreign_key_checks=OFF
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_IGNORE = 1852; //SQLSTATE: HY000 Message: Creating unique indexes with IGNORE requires COPY algorithm to remove duplicate rows
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOPK = 1853; //SQLSTATE: HY000 Message: Dropping a primary key is not allowed without also adding a new primary key
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_AUTOINC = 1854; //SQLSTATE: HY000 Message: Adding an auto-increment column requires a lock
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_HIDDEN_FTS = 1855; //SQLSTATE: HY000 Message: Cannot replace hidden FTS_DOC_ID with a user-visible one
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_CHANGE_FTS = 1856; //SQLSTATE: HY000 Message: Cannot drop or rename FTS_DOC_ID
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FTS = 1857; //SQLSTATE: HY000 Message: Fulltext index creation requires a lock
int ER_SQL_SLAVE_SKIP_COUNTER_NOT_SETTABLE_IN_GTID_MODE = 1858; //SQLSTATE: HY000 Message: sql_slave_skip_counter can not be set when the server is running with GTID_MODE = ON. Instead, for each transaction that you want to skip, generate an empty transaction with the same GTID as the transaction
int ER_DUP_UNKNOWN_IN_INDEX = 1859; //SQLSTATE: 23000 Message: Duplicate entry for key '%s'
int ER_IDENT_CAUSES_TOO_LONG_PATH = 1860; //SQLSTATE: HY000 Message: Long database name and identifier for object resulted in path length exceeding %d characters. Path: '%s'.
int ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOT_NULL = 1861; //SQLSTATE: HY000 Message: cannot silently convert NULL values, as required in this SQL_MODE; was introduced in 5.7.1.
int ER_MUST_CHANGE_PASSWORD_LOGIN = 1862; //SQLSTATE: HY000 Message: Your password has expired. To log in you must change it using a client that supports expired passwords. was introduced in 5.7.1.
int ER_ROW_IN_WRONG_PARTITION = 1863; //SQLSTATE: HY000 Message: Found a row in wrong partition %s; was introduced in 5.7.1.
int ER_MTS_EVENT_BIGGER_PENDING_JOBS_SIZE_MAX = 1864; //SQLSTATE: HY000 Message: Cannot schedule event %s, relay-log name %s, position %s to Worker thread because its size %lu exceeds %lu of slave_pending_jobs_size_max.; was introduced in 5.7.2.
int ER_INNODB_NO_FT_USES_PARSER = 1865; //SQLSTATE: HY000 Message: Cannot CREATE FULLTEXT INDEX WITH PARSER on InnoDB table; was introduced in 5.7.2.
int ER_BINLOG_LOGICAL_CORRUPTION = 1866; //SQLSTATE: HY000 Message: The binary log file '%s' is logically corrupted: %s; was introduced in 5.7.2.
int ER_WARN_PURGE_LOG_IN_USE = 1867; //SQLSTATE: HY000 Message: file %s was not purged because it was being read by %d thread(s), purged only %d out of %d files. was introduced in 5.7.2.
int ER_WARN_PURGE_LOG_IS_ACTIVE = 1868; //SQLSTATE: HY000 Message: file %s was not purged because it is the active log file.; was introduced in 5.7.2.
int ER_AUTO_INCREMENT_CONFLICT = 1869; //SQLSTATE: HY000 Message: Auto-increment value in UPDATE conflicts with internally generated values; was introduced in 5.7.2.
int WARN_ON_BLOCKHOLE_IN_RBR = 1870; //SQLSTATE: HY000 Message: Row events are not logged for %s statements that modify BLACKHOLE tables in row format. Table(s): '%s'; was introduced in 5.7.2.
int ER_SLAVE_MI_INIT_REPOSITORY = 1871; //SQLSTATE: HY000 Message: Slave failed to initialize master info structure from the repository; was introduced in 5.7.2.
int ER_SLAVE_RLI_INIT_REPOSITORY = 1872; //SQLSTATE: HY000 Message: Slave failed to initialize relay log info structure from the repository; was introduced in 5.7.2.
int ER_ACCESS_DENIED_CHANGE_USER_ERROR = 1873; //SQLSTATE: 28000 Message: Access denied trying to change to user '%s'@'%s' (using password: %s). Disconnecting. was introduced in 5.7.2.
int ER_INNODB_READ_ONLY = 1874; //SQLSTATE: HY000 Message: InnoDB is in read only mode.; was introduced in 5.7.2.
int ER_STOP_SLAVE_SQL_THREAD_TIMEOUT = 1875; //SQLSTATE: HY000 Message: STOP SLAVE command execution is incomplete: Slave SQL thread got the stop signal, thread is busy, SQL thread will stop once the current task is complete.; was introduced in 5.7.2.
int ER_STOP_SLAVE_IO_THREAD_TIMEOUT = 1876; //SQLSTATE: HY000 Message: STOP SLAVE command execution is incomplete: Slave IO thread got the stop signal, thread is busy, IO thread will stop once the current task is complete.; was introduced in 5.7.2.
int ER_TABLE_CORRUPT = 1877; //SQLSTATE: HY000 Message: Operation cannot be performed. The table '%s.%s' is missing, corrupt or contains bad data.; was introduced in 5.7.2.
int ER_TEMP_FILE_WRITE_FAILURE = 1878; //SQLSTATE: HY000 Message: Temporary file write failure.; was introduced in 5.7.3.
int ER_INNODB_FT_AUX_NOT_HEX_ID = 1879; //SQLSTATE: HY000 Message: Upgrade index name failed, please use create index(alter table) algorithm copy to rebuild index.; was introduced in 5.7.4.
int ER_OLD_TEMPORALS_UPGRADED = 1880; //SQLSTATE: HY000 Message: TIME/TIMESTAMP/DATETIME columns of old format have been upgraded to the new format.; was introduced in 5.7.4.
int ER_INNODB_FORCED_RECOVERY = 1881; //SQLSTATE: HY000 Message: Operation not allowed when innodb_forced_recovery > 0.; was introduced in 5.7.4.
int ER_AES_INVALID_IV = 1882; //SQLSTATE: HY000 Message: The initialization vector supplied to %s is too short. Must be at least %d bytes long; was introduced in 5.7.4.
int ER_FILE_CORRUPT = 1883; //SQLSTATE: HY000 Message: File %s is corrupted
int ER_ERROR_ON_MASTER = 1884; //SQLSTATE: HY000 Message: Query partially completed on the master (error on master: %d) and was aborted. There is a chance that your master is inconsistent at this point. If you are sure that your master is ok, run this query manually on the slave and then restart the slave with SET GLOBAL SQL_SLAVE_SKIP_COUNTER=1; START SLAVE;. Query:'%s'
int ER_INCONSISTENT_ERROR = 1885; //SQLSTATE: HY000 Message: Query caused different errors on master and slave. Error on master: message (format)='%s' error code=%d; Error on slave:actual message='%s', error code=%d. Default database:'%s'. Query:'%s'
int ER_STORAGE_ENGINE_NOT_LOADED = 1886; //SQLSTATE: HY000 Message: Storage engine for table '%s'.'%s' is not loaded.
int ER_GET_STACKED_DA_WITHOUT_ACTIVE_HANDLER = 1887; //SQLSTATE: 0Z002 Message: GET STACKED DIAGNOSTICS when handler not active
int ER_WARN_LEGACY_SYNTAX_CONVERTED = 1888; //SQLSTATE: HY000 Message: %s is no longer supported. The statement was converted to %s.
int ER_BINLOG_UNSAFE_FULLTEXT_PLUGIN = 1889; //SQLSTATE: HY000 Message: Statement is unsafe because it uses a fulltext parser plugin which may not return the same value on the slave.; was introduced in 5.7.1.
int ER_CANNOT_DISCARD_TEMPORARY_TABLE = 1890; //SQLSTATE: HY000 Message: Cannot DISCARD/IMPORT tablespace associated with temporary table; was introduced in 5.7.1.
int ER_FK_DEPTH_EXCEEDED = 1891; //SQLSTATE: HY000 Message: Foreign key cascade delete/update exceeds max depth of %d.; was introduced in 5.7.2.
int ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE_V2 = 1892; //SQLSTATE: HY000 Message: Column count of %s.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error.; was introduced in 5.7.2.
int ER_WARN_TRIGGER_DOESNT_HAVE_CREATED = 1893; //SQLSTATE: HY000 Message: Trigger %s.%s.%s does not have CREATED attribute.; was introduced in 5.7.2.
int ER_REFERENCED_TRG_DOES_NOT_EXIST = 1894; //SQLSTATE: HY000 Message: Referenced trigger '%s' for the given action time and event type does not exist.; was introduced in 5.7.2.
int ER_EXPLAIN_NOT_SUPPORTED = 1895; //SQLSTATE: HY000 Message: EXPLAIN FOR CONNECTION command is supported only for SELECT/UPDATE/INSERT/DELETE/REPLACE; was introduced in 5.7.2.
int ER_INVALID_FIELD_SIZE = 1896; //SQLSTATE: HY000 Message: Invalid size for column '%s'.; was introduced in 5.7.2.
int ER_MISSING_HA_CREATE_OPTION = 1897; //SQLSTATE: HY000 Message: Table storage engine '%s' found required create option missing; was introduced in 5.7.2.
int ER_ENGINE_OUT_OF_MEMORY = 1898; //SQLSTATE: HY000 Message: Out of memory in storage engine '%s'.; was introduced in 5.7.3.
int ER_PASSWORD_EXPIRE_ANONYMOUS_USER = 1899; //SQLSTATE: HY000 Message: The password for anonymous user cannot be expired.; was introduced in 5.7.3.
int ER_SLAVE_SQL_THREAD_MUST_STOP = 1900; //SQLSTATE: HY000 Message: This operation cannot be performed with a running slave sql thread; run STOP SLAVE SQL_THREAD first; was introduced in 5.7.3.
int ER_NO_FT_MATERIALIZED_SUBQUERY = 1901; //SQLSTATE: HY000 Message: Cannot create FULLTEXT index on materialized subquery; was introduced in 5.7.4.
int ER_INNODB_UNDO_LOG_FULL = 1902; //SQLSTATE: HY000 Message: Undo Log error: %s; was introduced in 5.7.4.
int ER_INVALID_ARGUMENT_FOR_LOGARITHM = 1903; //SQLSTATE: 2201E Message: Invalid argument for logarithm; was introduced in 5.7.4.
int ER_SLAVE_IO_THREAD_MUST_STOP = 1904; //SQLSTATE: HY000 Message: This operation cannot be performed with a running slave io thread; run STOP SLAVE IO_THREAD first.; was introduced in 5.7.4.
int ER_WARN_OPEN_TEMP_TABLES_MUST_BE_ZERO = 1905; //SQLSTATE: HY000 Message: This operation may not be safe when the slave has temporary tables. The tables will be kept open until the server restarts or until the tables are deleted by any replicated DROP statement. Suggest to wait until slave_open_temp_tables = 0.; was introduced in 5.7.4.
int ER_WARN_ONLY_MASTER_LOG_FILE_NO_POS = 1906; //SQLSTATE: HY000 Message: CHANGE MASTER TO with a MASTER_LOG_FILE clause but no MASTER_LOG_POS clause may not be safe. The old position value may not be valid for the new binary log file.; was introduced in 5.7.4.
int ER_QUERY_TIMEOUT = 1907; //SQLSTATE: HY000 Message: Query execution was interrupted, max_statement_time exceeded; was introduced in 5.7.4.
int ER_NON_RO_SELECT_DISABLE_TIMER = 1908; //SQLSTATE: HY000 Message: Select is not a read only statement, disabling timer; was introduced in 5.7.4.
int ER_DUP_LIST_ENTRY = 1909; //SQLSTATE: HY000 Message: Duplicate entry '%s'.; was introduced in 5.7.4.
int ER_SQL_MODE_NO_EFFECT = 1910; //SQLSTATE: HY000 Message: '%s' mode no longer has any effect. Use STRICT_ALL_TABLES or STRICT_TRANS_TABLES instead.; was introduced in 5.7.4.