在osx 10.11之前cocopods问题不多，但是升级到11之后的版本，之前的cocopods大多用不了，需要重新安装，对于我这种使用测试版系统的技术狂来说，每次都需要重新安装很多东西，
当然，cocopods也避免不了安装很多次了。
对于新手来说，使用cocopods开发，还是节省了相当多的开发时间，以下便是cocopods安装和安装过程中遇到的问题及解决办法：
新电脑新系统测试安装！
【注：可以直接从第二步开始安装】
2、出现以下问题，大家不要慌：
1 boai:~ boai$ sudo gem install cocoapods 2 ERROR: Could not find a valid gem 'cocoapods' (>= 0), here is why: 3 Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz) 4 boai:~ boai$ sudo gem install cocoapods 5 ERROR: Could not find a valid gem 'cocoapods' (>= 0), here is why: 6 Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz) 7 boai:~ boai$ sudo gem update --system 8 ERROR: While executing gem ... (Gem::RemoteFetcher::FetchError) 9 bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)
解决办法：
（1）先执行下面两行代码：
1 sudo gem sources -r https://rubygems.org
2 sudo gem sources -a http://rubygems.org
（2）执行过程如下：
1 boai:~ boai$ sudo gem sources -r https://rubygems.org 2 source https://rubygems.org not present in cache 3 boai:~ boai$ sudo gem sources -a http://rubygems.org 4 https://rubygems.org is recommended for security over http://rubygems.org 5 6 Do you want to add this insecure source? [yn] y
最后会提示
Do you want to add this insecure source? [yn]
你选择 y就行了
然后出现：
http://rubygems.org added to sources
这就说明成功了，就可以执行下面的安装了。
在2016年7月1日开始，会出现以下错误，
rvm: command not found Mac
activesupport requires Ruby version >= 2.2.2.
这两种错误的解决办法如下;
强烈建议 使用rvm安装ruby
1、安装 RVM
RVM:Ruby Version Manager,Ruby版本管理器，包括Ruby的版本管理和Gem库管理(gemset)
- $ curl -L get.rvm.io | bash -s stable
等待一段时间后就可以成功安装好 RVM。
- $ source ~/.bashrc
- $ source ~/.bash_profile
测试是否安装正常
rvm -v
2、用RVM升级Ruby
- #查看当前ruby版本
- $ ruby -v
- ruby 1.8.7
- #列出已知的ruby版本
- $ rvm list known
- #安装ruby 2.3.0
-
boaideMacBook:~ boai$ rvm install 2.3.0
期间会让你输入两次回车键，记得哦，别像我一样傻等了半天，以为网卡呢，
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
boaideMacBook:~ boai$ rvm install 2.3.0
Searching for binary rubies, this might take some time.
No binary rubies available for : osx/10.11/x86_64/ruby-2.3.0.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for osx.
About to install Homebrew, press `Enter` for default installation in `/usr/local`,
type new path if you wish custom Homebrew installation (the path needs to be writable for user)
:
==> This script will install:
/usr/local/bin/brew
/usr/local/Library/...
/usr/local/share/doc/homebrew
/usr/local/share/man/man1/brew.1
/usr/local/share/zsh/site-functions/_brew
/usr/local/etc/bash_completion.d/brew
==> The following directories will be made group writable:
/usr/local/.
==> The following directories will have their owner set to boai:
/usr/local/.
==> The following directories will have their group set to admin:
/usr/local/.
Press RETURN to continue or any other key to abort
==> /usr/bin/sudo /bin/chmod g+rwx /usr/local/.
Password:
==> /usr/bin/sudo /usr/sbin/chown boai /usr/local/.
==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local/.
==> /usr/bin/sudo /bin/mkdir /Users/boai/Library/Caches/Homebrew
==> /usr/bin/sudo /bin/chmod g+rwx /Users/boai/Library/Caches/Homebrew
==> /usr/bin/sudo /usr/sbin/chown boai /Users/boai/Library/Caches/Homebrew
==> Downloading and installing Homebrew...
remote: Counting objects: 520, done.
remote: Compressing objects: 100% (461/461), done.
remote: Total 520 (delta 30), reused 318 (delta 28), pack-reused 0
Receiving objects: 100% (520/520), 786.43 KiB | 146.00 KiB/s, done.
Resolving deltas: 100% (30/30), done.
From https: //github.com/Homebrew/brew
* [ new branch] master -> origin/master
HEAD is now at 5768e32 test-bot: fix coverage on Travis CI
==> Tapping homebrew/core
Cloning into '/usr/local/Library/Taps/homebrew/homebrew-core' ...
remote: Counting objects: 3718, done.
remote: Compressing objects: 100% (3605/3605), done.
remote: Total 3718 (delta 7), reused 2085 (delta 4), pack-reused 0
Receiving objects: 100% (3718/3718), 2.89 MiB | 521.00 KiB/s, done.
Resolving deltas: 100% (7/7), done.
Checking connectivity... done.
Tapped 3596 formulae (3,744 files, 9.0M)
==> Installation successful!
==> Next steps
Run `brew help` to get started
Further documentation: https: //git.io/brew-docs
==> Homebrew has enabled anonymous aggregate user behaviour analytics
Read the analytics documentation (and how to opt-out) here:
https: //git.io/brew-analytics
Installing requirements for osx.
Updating system.....
Installing required packages: autoconf, automake, libtool, pkg-config, libyaml, readline, libksba, openssl........
Certificates in '/usr/local/etc/openssl/cert.pem' are already up to date.
Requirements installation successful.
Installing Ruby from source to: /Users/boai/.rvm/rubies/ruby-2.3.0, this may take a while depending on your cpu(s)...
ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 13.5M 100 13.5M 0 0 3078k 0 0:00:04 0:00:04 --:--:-- 3477k
ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....
ruby-2.3.0 - #configuring....................................................
|
时间比较长：
安装成功后提示:
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
|
ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 13.5M 100 13.5M 0 0 3078k 0 0:00:04 0:00:04 --:--:-- 3477k
ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....
ruby-2.3.0 - #configuring......................................................|
ruby-2.3.0 - #post-configuration.
ruby-2.3.0 - #compiling........................................................|
ruby-2.3.0 - #installing.........
ruby-2.3.0 - #making binaries executable..
Installed rubygems 2.5.1 is newer than 2.4.8 provided with installed ruby, skipping installation, use --force to force installation.
ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0 @global
ruby-2.3.0 - #importing gemset /Users/boai/.rvm/gemsets/global.gems............|
ruby-2.3.0 - #generating global wrappers........
ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0
ruby-2.3.0 - #importing gemsetfile /Users/boai/.rvm/gemsets/ default .gems evaluated to empty gem list
ruby-2.3.0 - #generating default wrappers........
ruby-2.3.0 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake).
Install of ruby-2.3.0 - #complete
Ruby was built without documentation, to build it run: rvm docs generate-ri
boaideMacBook:~ boai$
|
然后再执行这句代码:
1 boai:~ boai$ sudo gem install cocoapods
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
boaideMacBook:~ boai$ sudo gem install cocoapods
Password:
Fetching: i18n-0.7.0.gem (100%)
Successfully installed i18n-0.7.0
Fetching: thread_safe-0.3.5.gem (100%)
Successfully installed thread_safe-0.3.5
Fetching: tzinfo-1.2.2.gem (100%)
Successfully installed tzinfo-1.2.2
Fetching: concurrent-ruby-1.0.2.gem (100%)
Successfully installed concurrent-ruby-1.0.2
Fetching: activesupport-5.0.0.gem (100%)
Successfully installed activesupport-5.0.0
Fetching: nap-1.1.0.gem (100%)
Successfully installed nap-1.1.0
Fetching: fuzzy_match-2.0.4.gem (100%)
Successfully installed fuzzy_match-2.0.4
Fetching: cocoapods-core-1.0.1.gem (100%)
Successfully installed cocoapods-core-1.0.1
Fetching: claide-1.0.0.gem (100%)
Successfully installed claide-1.0.0
Fetching: cocoapods-deintegrate-1.0.0.gem (100%)
Successfully installed cocoapods-deintegrate-1.0.0
Fetching: cocoapods-downloader-1.1.0.gem (100%)
Successfully installed cocoapods-downloader-1.1.0
Fetching: cocoapods-plugins-1.0.0.gem (100%)
Successfully installed cocoapods-plugins-1.0.0
Fetching: cocoapods-search-1.0.0.gem (100%)
Successfully installed cocoapods-search-1.0.0
Fetching: cocoapods-stats-1.0.0.gem (100%)
Successfully installed cocoapods-stats-1.0.0
Fetching: netrc-0.7.8.gem (100%)
Successfully installed netrc-0.7.8
Fetching: cocoapods-trunk-1.0.0.gem (100%)
Successfully installed cocoapods-trunk-1.0.0
Fetching: cocoapods- try -1.1.0.gem (100%)
Successfully installed cocoapods- try -1.1.0
Fetching: molinillo-0.4.5.gem (100%)
Successfully installed molinillo-0.4.5
Fetching: colored-1.2.gem (100%)
Successfully installed colored-1.2
Fetching: xcodeproj-1.2.0.gem (100%)
Successfully installed xcodeproj-1.2.0
Fetching: escape-0.0.4.gem (100%)
Successfully installed escape-0.0.4
Fetching: fourflusher-0.3.2.gem (100%)
Successfully installed fourflusher-0.3.2
Fetching: cocoapods-1.0.1.gem (100%)
Successfully installed cocoapods-1.0.1
Parsing documentation for i18n-0.7.0
Installing ri documentation for i18n-0.7.0
Parsing documentation for thread_safe-0.3.5
Installing ri documentation for thread_safe-0.3.5
Parsing documentation for tzinfo-1.2.2
Installing ri documentation for tzinfo-1.2.2
Parsing documentation for concurrent-ruby-1.0.2
Installing ri documentation for concurrent-ruby-1.0.2
Parsing documentation for activesupport-5.0.0
Installing ri documentation for activesupport-5.0.0
Parsing documentation for nap-1.1.0
Installing ri documentation for nap-1.1.0
Parsing documentation for fuzzy_match-2.0.4
Installing ri documentation for fuzzy_match-2.0.4
Parsing documentation for cocoapods-core-1.0.1
Installing ri documentation for cocoapods-core-1.0.1
Parsing documentation for claide-1.0.0
Installing ri documentation for claide-1.0.0
Parsing documentation for cocoapods-deintegrate-1.0.0
Installing ri documentation for cocoapods-deintegrate-1.0.0
Parsing documentation for cocoapods-downloader-1.1.0
Installing ri documentation for cocoapods-downloader-1.1.0
Parsing documentation for cocoapods-plugins-1.0.0
Installing ri documentation for cocoapods-plugins-1.0.0
Parsing documentation for cocoapods-search-1.0.0
Installing ri documentation for cocoapods-search-1.0.0
Parsing documentation for cocoapods-stats-1.0.0
Installing ri documentation for cocoapods-stats-1.0.0
Parsing documentation for netrc-0.7.8
Installing ri documentation for netrc-0.7.8
Parsing documentation for cocoapods-trunk-1.0.0
Installing ri documentation for cocoapods-trunk-1.0.0
Parsing documentation for cocoapods- try -1.1.0
Installing ri documentation for cocoapods- try -1.1.0
Parsing documentation for molinillo-0.4.5
Installing ri documentation for molinillo-0.4.5
Parsing documentation for colored-1.2
Installing ri documentation for colored-1.2
Parsing documentation for xcodeproj-1.2.0
Installing ri documentation for xcodeproj-1.2.0
Parsing documentation for escape-0.0.4
Installing ri documentation for escape-0.0.4
Parsing documentation for fourflusher-0.3.2
Installing ri documentation for fourflusher-0.3.2
Parsing documentation for cocoapods-1.0.1
Installing ri documentation for cocoapods-1.0.1
Done installing documentation for i18n, thread_safe, tzinfo, concurrent-ruby, activesupport, nap, fuzzy_match, cocoapods-core, claide, cocoapods-deintegrate, cocoapods-downloader, cocoapods-plugins, cocoapods-search, cocoapods-stats, netrc, cocoapods-trunk, cocoapods- try , molinillo, colored, xcodeproj, escape, fourflusher, cocoapods after 24 seconds
23 gems installed
boaideMacBook:~ boai$
|
这就代表安装成功了！
3、安装cocopods
执行下面的语句：
1 sudo gem install cocoapods
据说新版本改了，没有验证，大家可以试试看：
|
1
|
sudo gem install -n /usr/local/bin cocoapods
|
会出现下面的界面：（激动。。。）
boai:~ boai$ sudo gem install cocoapods Fetching: nap-1.0.0.gem (100%) Successfully installed nap-1.0.0 Fetching: thread_safe-0.3.5.gem (100%) Successfully installed thread_safe-0.3.5 Fetching: tzinfo-1.2.2.gem (100%) Successfully installed tzinfo-1.2.2 Fetching: i18n-0.7.0.gem (100%) Successfully installed i18n-0.7.0 Fetching: activesupport-4.2.5.gem (100%) Successfully installed activesupport-4.2.5 Fetching: escape-0.0.4.gem (100%) Successfully installed escape-0.0.4 Fetching: colored-1.2.gem (100%) Successfully installed colored-1.2 Fetching: molinillo-0.4.0.gem (100%) Successfully installed molinillo-0.4.0 Fetching: netrc-0.7.8.gem (100%) Successfully installed netrc-0.7.8 Fetching: cocoapods-trunk-0.6.4.gem (100%) Successfully installed cocoapods-trunk-0.6.4 Fetching: cocoapods-try-0.5.1.gem (100%) Successfully installed cocoapods-try-0.5.1 Fetching: cocoapods-stats-0.6.2.gem (100%) Successfully installed cocoapods-stats-0.6.2 Fetching: cocoapods-search-0.1.0.gem (100%) Successfully installed cocoapods-search-0.1.0 Fetching: cocoapods-plugins-0.4.2.gem (100%) Successfully installed cocoapods-plugins-0.4.2 Fetching: cocoapods-downloader-0.9.3.gem (100%) Successfully installed cocoapods-downloader-0.9.3 Fetching: claide-0.9.1.gem (100%) Successfully installed claide-0.9.1 Fetching: xcodeproj-0.28.2.gem (100%) Successfully installed xcodeproj-0.28.2 Fetching: fuzzy_match-2.0.4.gem (100%) Successfully installed fuzzy_match-2.0.4 Fetching: cocoapods-core-0.39.0.gem (100%) Successfully installed cocoapods-core-0.39.0 Fetching: cocoapods-0.39.0.gem (100%) Successfully installed cocoapods-0.39.0 Parsing documentation for nap-1.0.0 Installing ri documentation for nap-1.0.0 Parsing documentation for thread_safe-0.3.5 Installing ri documentation for thread_safe-0.3.5 Parsing documentation for tzinfo-1.2.2 Installing ri documentation for tzinfo-1.2.2 Parsing documentation for i18n-0.7.0 Installing ri documentation for i18n-0.7.0 Parsing documentation for activesupport-4.2.5 Installing ri documentation for activesupport-4.2.5 Parsing documentation for escape-0.0.4 Installing ri documentation for escape-0.0.4 Parsing documentation for colored-1.2 Installing ri documentation for colored-1.2 Parsing documentation for molinillo-0.4.0 Installing ri documentation for molinillo-0.4.0 Parsing documentation for netrc-0.7.8 Installing ri documentation for netrc-0.7.8 Parsing documentation for cocoapods-trunk-0.6.4 Installing ri documentation for cocoapods-trunk-0.6.4 Parsing documentation for cocoapods-try-0.5.1 Installing ri documentation for cocoapods-try-0.5.1 Parsing documentation for cocoapods-stats-0.6.2 Installing ri documentation for cocoapods-stats-0.6.2 Parsing documentation for cocoapods-search-0.1.0 Installing ri documentation for cocoapods-search-0.1.0 Parsing documentation for cocoapods-plugins-0.4.2 Installing ri documentation for cocoapods-plugins-0.4.2 Parsing documentation for cocoapods-downloader-0.9.3 Installing ri documentation for cocoapods-downloader-0.9.3 Parsing documentation for claide-0.9.1 Installing ri documentation for claide-0.9.1 Parsing documentation for xcodeproj-0.28.2 Installing ri documentation for xcodeproj-0.28.2 Parsing documentation for fuzzy_match-2.0.4 Installing ri documentation for fuzzy_match-2.0.4 Parsing documentation for cocoapods-core-0.39.0 Installing ri documentation for cocoapods-core-0.39.0 Parsing documentation for cocoapods-0.39.0 Installing ri documentation for cocoapods-0.39.0 Done installing documentation for nap, thread_safe, tzinfo, i18n, activesupport, escape, colored, molinillo, netrc, cocoapods-trunk, cocoapods-try, cocoapods-stats, cocoapods-search, cocoapods-plugins, cocoapods-downloader, claide, xcodeproj, fuzzy_match, cocoapods-core, cocoapods after 21 seconds WARNING: Unable to pull data from 'http://ruby.taobao.org/': bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz) 20 gems installed
看到最后一行代码，你就放120个心吧。。。
然后就可以查看你的pods版本了：
输入：pod
然后会出现下面的代码：
boai:~ boai$ pod
Usage:
$ pod COMMAND
CocoaPods, the Cocoa library package manager.
Commands:
+ cache Manipulate the CocoaPods cache
+ init Generate a Podfile for the current directory.
+ install Install project dependencies to Podfile.lock versions
+ ipc Inter-process communication
+ lib Develop pods
+ list List pods
+ outdated Show outdated project dependencies
+ plugins Show available CocoaPods plugins
+ repo Manage spec-repositories
+ search Search for pods.
+ setup Setup the CocoaPods environment
+ spec Manage pod specs
+ trunk Interact with the CocoaPods API (e.g. publishing new specs)
+ try Try a Pod!
+ update Update outdated project dependencies and create new
Podfile.lock
Options:
--silent Show nothing
--version Show the version of the tool
--verbose Show more debugging information
--no-ansi Show output without ANSI codes
--help Show help banner of specified command
boai:~ boai$
这就安装成功了，就可以正常使用pod了。。。
4、接下来就可以在项目中使用了，
打开终端：
cd 你的项目路径
boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest
然后：输入touch podfile 或者 pod init (会自动生成podfile文件)
boai:BAPDCViewTest boai$ pod init boai:BAPDCViewTest boai$ pod install
接下来出现：
Last login: Fri Nov 20 11:02:59 on ttys006 boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest boai:BAPDCViewTest boai$ touch podfile boai:BAPDCViewTest boai$ pod install Updating local specs repositories Analyzing dependencies Downloading dependencies Generating Pods project Integrating client project [!] Please close any current Xcode sessions and use `BAPDCViewTest.xcworkspace` for this project from now on. Sending stats Pod installation complete! There are 0 dependencies from the Podfile and 0 total pods installed. [!] [!] The Podfile does not contain any dependencies. boai:BAPDCViewTest boai$
这就成功了，然后再看看你的项目路径里面，是不是多出来很多文件？
如下图：
然后双击***.workspace 文件就可以使用pods了！
5、新版本pod 安装问题：
podfile升级之后到最新版本，pod里的内容必须明确指出所用第三方库的target，否则会出现The dependency `` is not used in any concrete target这样的错误。
以下从三个步骤陈述：
4.1. Podfile升级
查看pod版本：
|
1
|
pod --version
|
pod 升级（此时是升级到1.0.0.beta.2版本）：
|
1
|
sudo gem install cocoapods --pre
|
4.2. 错误内容：
我的Podfile的内容是：
|
1
|
pod ‘SDWebImage‘, ‘3.6‘
|
pod install后出现错误The dependency `` is not used in any concrete target
|
1
2
3
4
5
6
7
8
|
pod install
/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/universal-darwin14/rbconfig.rb:213: warning: Insecure world writable dir /Applications/Cocos/tools/ant/bin in PATH, mode 040777
Re-creating CocoaPods due to major version update.
Updating local specs repositories
Analyzing dependencies
The dependency `SDWebImage (= 3.6)` is not used in any concrete target.
|
4.3. 修改方法：
Podfile内容更改：
步骤：
4.3.1 双击双击***.workspace 文件，打开项目
4.3.2 拉到最下面，找到pods，打开后点击podfile文件，
4.3.3 在podfile里面添加所需要的三方库
最终的podfile 文件规范内容为下：
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
|
# Uncomment this line to define a global platform for your project
# platform :ios, '8.0'
# Uncomment this line if you're using Swift
# use_frameworks!
xcodeproj 'BABaseProject.xcodeproj'
# 去掉由pod引入的第三方库的警告，需要更新命令才生效
inhibit_all_warnings!
target 'BABaseProject' do
# 对系统原生的AutoLayout 的 NSLayoutConstraints类的封装，优雅的链式语法，GitHub 排名第三
pod 'Masonry' , '~> 0.6.4'
# 两个都是自动布局框架
pod 'SDAutoLayout' , '~> 1.31'
# 自定义button框架
pod 'BAButton' , '~> 1.0.1'
end
target 'BABaseProjectTests' do
end
target 'BABaseProjectUITests' do
end
|
4.3.4 完成podfile 的内容更改后，记得 cmd + s 保存更改，然后打开终端
4.3.5 在终端中cd 项目路径，打开项目后，输入：
|
1
2
3
4
5
6
7
8
9
|
pod install --verbose --no-repo-update
pod update --verbose --no-repo-update
或者
pod install --no-repo-update
pod update --no-repo-update
|
然后看你的项目路径pod下面， 是不是已经添加了你所需要的三方库呢？
如果更新pod 的时候出现这个问题：
安装cocoapods遇到error: RPC failed; curl 56 SSLRead() return error -36问题
解决办法如下：终端输入以下代码：
class = "hljs cs has-numbering" style="display: block; padding: 0px;
color: inherit; box-sizing: border-box;
font-family: 'Source Code Pro' , monospace;font-size:undefined;
white-space: pre; border-top-left-radius: 0px; border-top-right-radius:
0px; border-bottom-right-radius: 0px; border-bottom-left-radius: 0px;
word-wrap: normal; background-position: initial initial;
background-repeat: initial initial;">sudo xcode-
class = "hljs-keyword" style="color: rgb(0, 0, 136); box-sizing:
border-box; ">select -hljs-keyword"
style="color: rgb(0, 0, 136); box-sizing:
border-box;"> switch
/Applications/Xcode.app/Contents/Developersclass = "pre-numbering" style="box-sizing: border-box; position: absolute;
width: 50px; top: 0px; left: 0px;
margin: 0px; padding: 6px 0px 40px; border-right-width: 1px;
border-right-style: solid; border-right-color: rgb(221, 221, 221);
list-style: none; text-align: right; ">
border-box; padding: 0px 5px;">1class = "pre-numbering" style="box-sizing: border-box; position: absolute;
width: 50px; top: 0px; left: 0px;
margin: 0px; padding: 6px 0px 40px; border-right-width: 1px;
border-right-style: solid; border-right-color: rgb(221, 221, 221);
list-style: none; text-align: right; ">
border-box; padding: 0px 5px;">1
|
然后再更新pod试试！
如果出现这个：
|
1
|
[!] xcodeproj was renamed to `project`. Please use that from now on.
|
只需要将这里的名字改过来就行了：
1 # Uncomment this line to define a global platform for your project 2 # platform :ios, '8.0' 3 # Uncomment this line if you're using Swift 4 # use_frameworks! 5 6 project 'BABaseProject.project' 7 8 9 # 去掉由pod引入的第三方库的警告，需要更新命令才生效 10 inhibit_all_warnings! 11 12 # pod 快速更新方法 13 # pod update --verbose --no-repo-update 14 15 target 'BABaseProject' do