AS/NZS 2269.0结构胶合板
AS/NZS 2269.0结构胶合板—测试标准
AS/NZS 2269.0 Plywood-structural
AS/NZS 2269.0 结构胶合板
AS/NZS 2269.0结构胶合板—测试范围
This Standard specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and surface grades are also provided. The Standard also specifies veneer quality, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated F-grades.
本标准规定了结构胶合板的制造、分级、涂饰和品牌化的要求。还提供了应力等级和表面等级的规格。该标准还规定了指定f级的单板质量、粘结质量、标准铺设结构、尺寸公差、接缝、含水率和特征强度和刚度值
AS/NZS 2269.0结构胶合板—检测项目及方法
AS/NZS 2098.4 Dimensions(Thickness,Length,Width) 尺寸(厚度、长度和宽度)
AS/NZS 2098.4 Squareness 垂直度
AS/NZS 2098.4 Straightness of edges 边直度
AS/NZS 2098.4 Flatness翘曲度
AS/NZS 2098.1 Moisture content含水率
AS/NZS 1604.1 Immunization of lyctid-susceptible sapwood 木质抗虫性
AS/NZS 2098.11 Formaldehyde emission 甲醛释放量
Structural joints in plywood sheet 接口质量
AS/NZS 2098.2 Bond quality(Type 1) 胶合质量
AS/NZS 2098.3 Scarf bending stength(Type 2)弯曲强度
AS/NZS 2098.2 Bond quality(Type A) 胶合质量
AS/NZS 2269.1 7.1 Bending strength
AS/NZS 2269.1 7.2 Modulus of elasticity and rigidity
AS/NZS 2269.1 7.1 Bending strength弯曲强度
AS/NZS 2269.1 7.2 Modulus of elasticity and rigidity弹性和刚性模量
AS/NZS 2269.1 7.3 Tension strength拉伸强度
AS/NZS 2269.1 7.4 Panel shear strength剪切强度
AS/NZS 2269.1 7.5 Compression strength抗压强度
详情请咨询：中科易朔（厦门）防火技术服务有限公司
出自GF2022