How to Perform a Health Check on the Database

How to Perform a Health Check on the Database (文档 ID 122669.1)

1. Parameter file
2. Controlfiles
3. Redolog files
4. Archiving
5. Datafiles
  5.1 Autoextend
  5.2 Location
6. Tablespaces
  6.1 SYSTEM Tablespace
  6.2 SYSAUX Tablespace (10g Release and above)
  6.3 Locally vs Dictionary Managed Tablespaces
  6.4 Temporary Tablespace
  6.5 Tablespace Fragmentation
7. Objects
  7.1 Number of Extents
  7.2 Next extent
  7.3 Indexes
8. AUTO vs MANUAL undo
  8.1 AUTO UNDO
  8.2 MANUAL UNDO
9. Memory Management
  9.1 Pre Oracle 9i
  9.2 Oracle 9i
  9.3 Oracle 10g
  9.4 Oracle 11g
  9.5 Oracle 12c

10. Logging & Tracing
  10.1 Alert File
  10.2 Max_dump_file_size
  10.3 User and core dump size parameters
  10.4 Audit files
11. Advanced Health Checking

DETAILS

1. Parameter file

The parameter file can exists in 2 forms. First of all we have the text-based version, commonly referred to as init.ora or pfile, and a binary-based file, commonly referred to as spfile. The pfile can be adjusted using a standard Operating System editor, while the spfile needs to be managed through the instance itself.

It is important to realize that the spfile takes presedence above the pfile, meaning whenever there is an spfile available this will be automatically taken unless specified otherwise.

NOTE: Getting an RDA report after making changes to the database configuration is also a recommendation. Keeping historical RDA reports will ensure you have an overview of the database configuration as the database evolves.

Reference:
Note 249664.1 Pfile vs SPfile

2. Controlfiles

It is highly recommended to have at least two copies of the controlfile. This can be done by mirroring the controlfile, strongly recommended on different physical disks. If a controlfile is lost, due to a disk crash for example, then you can use the mirrored file to startup the database. In this way fast and easy recovery 
from controlfile loss is obtained.

connect as sysdba
SQL> select status, name from v$controlfile;

STATUS NAME
------- ---------------------------------
/u01/oradata/L102/control01.ctl
/u02/oradata/L102/control02.ctl

The location and the number of controlfiles can be controlled by the 'control_files' initialization parameter.

3. Redolog files

The Oracle server maintains online redo log files to minimize loss of data in the database. Redo log files are used in a situation such as instance failure to recover commited data that has not yet been written to the data files. Mirroring the redo log files, strongly recommended on different physical disks, makes recovery more easy in case one of the redo log files is lost due to a disk crash, user delete, etc.

connect as sysdba
SQL> select * from v$logfile;

GROUP# STATUS TYPE MEMBER
--------- ------- ------ -----------------------------------
1 ONLINE /u01/oradata/L102/redo01_A.log
1 ONLINE /u02/oradata/L102/redo01_B.log

2 ONLINE /u01/oradata/L102/redo02_A.log
2 ONLINE /u02/oradata/L102/redo02_B.log

3 ONLINE /u01/oradata/L102/redo03_A.log
3 ONLINE /u02/oradata/L102/redo03_B.log

At least two redo log groups are required, although it is advisable to have at least three redo log groups when archiving is enabled (see the following chapter). It is common, in environments where there are intensive log switches, to see the ARCHiver background process fall behind of the LGWR background process. In this case the LGWR process needs to wait for the ARCH process to complete archiving the redo log file.

References:
Note 102995.1 Maintenance of Online Redo Log Groups and Members

4. Archiving

Archiving provides the mechanism needed to backup the changes of the database. The archive files are essential in providing the necessary information to recover the database. It is advisable to run the database in archive log mode, although you may have reasons for not doing this, for example in case of a TEST environment where you accept to loose the changes made between the current time and the last backup. 
You may ignore this chapter when the database doesn't run in archive log mode.

There are several ways of checking the archive configuration, below is one of them:

connect as sysdba
SQL> archive log list

Database log mode No Archive Mode --OR-- Archive Mode
Automatic archival Disabled --OR-- Enabled
Archive destination --OR-- USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence seq. no
Current log sequence seq. no

Pre-10g, if the database is running in archive log mode but the automatic archiver process is disabled, then you were required to manually archive the redolog files. 
If this is not done in time then the database is frozen and any activity is prevented.
Therefore you should enable automatic archiving when the database is running in archive log mode. This can be done by setting the 'log_archive_start' parameter to true in the parameter file.
Starting from 10g, this parameter became obsolete and is no longer required to be set explicitly. It is important that there is enough free space on the dedicated disk(s) for the archive files, otherwise the ARCHiver process can't write and a crash is inevitable.

References:
Note 69739.1 How to Turn Archiving ON and OFF
Note 122555.1 Determine how many disk space is needed for the archive files

5. Datafiles

5.1 Autoextend

The autoextend command option enables or disables the automatic extension of data files. If the given datafile is unable to allocate the space needed, it can increase the size of the datafile to make space for objects to grow.

A standard Oracle datafile can have, at most, 4194303 Oracle datablocks. 
So this also implies that the maximum size is dependant on the Oracle Block size used.

DB_BLOCK_SIZE Max Mb value to use in any command
~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2048 8191 M
4096 16383 M
8192 32767 M
16384 65535 M

Starting from Oracle 10g, we have a new functionality called BIGFILE, which allows for bigger files to be created. Please also consider that every Operating System has its limits, therefore you should make sure that the maximum size of a datafile cannot be extended past the Operating System allowed limit.

To determine if a datafile and thus, a tablespace, has AUTOEXTEND capabilities:

SQL> select file_id, tablespace_name, bytes, maxbytes, maxblocks, increment_by, file_name
from dba_data_files
where autoextensible = 'YES';

References:
Note 112011.1 ALERT: RESIZE or AUTOEXTEND can "Over-size" Datafiles and Corrupt the Dictionary
Note 262472.1 10g BIGFILE Type Tablespaces Versus SMALLFILE Type

5.2 Location

Verify the location of your datafiles. Overtime a database will grow and datafiles may be added to the database. Avoid placing datafiles on a 'wherever there is space' basis as this will complicate backup strategies and maintenance.

Below is an example of bad usage:

SQL> select * from v$dbfile; 

FILE# NAME
--------- --------------------------------------------------
1 D:\DATABASE\SYS1D806.DBF
2 D:\DATABASE\D806\RBS1D806.DBF 
3 D:\DATABASE\D806\TMP1D806.DBF
5 D:\DATABASE\D806\USR1D806.DBF
6 D:\USR2D806.DBF
7 F:\ORACLE\USR3D806.DBF

References:
Note 115424.1 How to Rename or Move Datafiles and Logfiles

6. Tablespaces

6.1 SYSTEM Tablespace

User objects should not be created in the system tablespace. Doing so can lead to unnecessary fragmentation and preventing system tables of growing. The following query returns a list of objects that are created in the system tablespace but not owned by SYS or SYSTEM.

SQL> select owner, segment_name, segment_type
from dba_segments
where tablespace_name = 'SYSTEM'
and owner not in ('SYS','SYSTEM');

 

6.2 SYSAUX Tablespace (10g Release and above)

The SYSAUX tablespace was automatically installed as an auxiliary tablespace to the SYSTEM tablespace when you created or upgraded the database. Some database components that formerly created and used separate tablespaces now occupy the SYSAUX tablespace.

If the SYSAUX tablespace becomes unavailable, core database functionality will remain operational. The database features that use the SYSAUX tablespace could fail, or function with limited capability.

The amount of data stored in this tablespace can be significant and may grow over time to unmanageble sizes if not configured properly. There are a few components that need special attention.

To check which components are occupying space:

SQL> select space_usage_kbytes, occupant_name, occupant_desc
from v$sysaux_occupants
order by 1 desc;

Reference:
Note 329984.1 Usage and Storage Management of SYSAUX tablespace occupants SM/AWR, SM/ADVISOR, SM/OPTSTAT and SM/OTHER

6.3 Locally vs Dictionary Managed Tablespaces

Locally Managed Tablespaces are available since Oracle 8i, however they became the default starting from Oracle 9i. Locally Managed Tablespaces, also referred to as LMT, have some advantage over Data Dictionary managed tablespaces.

To verify which tablespace is Locally Managed or Dictionary Managed, you can run the following query:

SQL> select tablespace_name, extent_management
from dba_tablespaces;

References:
Note 93771.1 Introduction to Locally-Managed Tablespaces
Note 105120.1Advantages of Using Locally Managed vs Dictionary Managed Tablespaces

6.4 Temporary Tablespace

* Locally Managed Tablespaces use tempfiles to serve the temporary tablespace, whereas Dictionary Managed Tablespaces use a tablespace of the type temporary. When you are running an older version (pre Oracle 9i), then it is important to check the type of tablespace used to store the temporary segments. By default, all tablespaces are created as PERMANENT, therefore you should make sure that the tablespace dedicated for temporary segments is of the type TEMPORARY.

SQL> select tablespace_name, contents
from dba_tablespaces;

TABLESPACE_NAME CONTENTS
------------------------------ ---------
SYSTEM PERMANENT
USER_DATA PERMANENT
ROLLBACK_DATA PERMANENT
TEMPORARY_DATA TEMPORARY

* Make sure that the users on the database are assigned a tablespace of the type temporary. The following query lists all the users that have a permanent tablespace specified as their default temporary tablespace.

SQL> select u.username, t.tablespace_name
from dba_users u, dba_tablespaces t
where u.temporary_tablespace = t.tablespace_name
and t.contents <> 'TEMPORARY';

Note: User SYS and SYSTEM will show the SYSTEM tablespace as there default temporary tablespace. This value can be altered as well to prevent fragmentation in the SYSTEM tablespace.

SQL> alter user SYSTEM temporary tablespace TEMP

*The space allocated in the temporary tablespace is reused. This is done for performance reasons to avoid the bottleneck of constant allocating and de-allocating of extents and segments. Therefore when looking at the free space in the temporary tablespace, this may appear as full all the time. The following are a few queries that can be used to list more meaningful information about the temporary segment usage:

This will give the size of the temporary tablespace:

SQL> select tablespace_name, sum(bytes)/1024/1024 mb
from dba_temp_files
group by tablespace_name;

This will give the "high water mark" of that temporary tablespace (= max used at one time):

SQL> select tablespace_name, sum(bytes_cached)/1024/1024 mb
from v$temp_extent_pool
group by tablespace_name;

This will give current usage:

SQL> select ss.tablespace_name, 
sum((ss.used_blocks*ts.blocksize))/1024/1024 mb
from gv$sort_segment ss, sys.ts$ ts
where ss.tablespace_name = ts.name
group by ss.tablespace_name;

6.5 Tablespace Fragmentation

Heavly fragmented tablespaces can have an impact on the performance, especially when a lot of Full Table Scans are occurring on the system. Another disadvantage of fragmentation is that you can get out-of-space errors while the total sum of all free space is much more then you had requested.

The only way to resolve fragmentation is recreate the object. As of Oracle8i you can use the 'alter table .. move' command. Prior to Oracle8i you could use export/import.

If you need to defragment your system tablespace, you must rebuild the whole database since it is NOT possible to drop the system tablespace.

References:
Note 1020182.6 - SCRIPT to detect tablespace fragmentation
Note 1012431.6 - Common causes of Fragmentation
Note 147356.1 - How to Move Tables from One Tablespace to Another.

7. Objects

7.1 Number of Extents

While the performance hit on over extended objects is not significant, the aggregate effect on many over extended objects does impact performance. The following query will list all the objects that have allocated more extents than a specified minimum. Change the <--minext--> value by an actual number, in general objects allocating more then 100 a 200 extents can be recreated with larger extent sizes:

SQL> select owner, segment_type, segment_name, tablespace_name,
count(blocks), SUM(bytes/1024) "BYTES K", SUM(blocks)
from dba_extents
where owner NOT IN ('SYS','SYSTEM')
group by owner, segment_type, segment_name, tablespace_name
having count(*) > <--minext-->>
order by segment_type, segment_name;

7.2 Next extent

It is important that segments can grow and therefore allocate their next extent when needed. If there is not enough free space in the tablespace then the next extent can not be allocated and the object will fail to grow. The following query returns all the segments that are unable to allocate their next extent :

select s.owner, s.segment_name, s.segment_type,
s.tablespace_name, s.next_extent
from dba_segments s
where s.next_extent > (select MAX(f.bytes)
from dba_free_space f
where f.tablespace_name = s.tablespace_name);

Note that if there is a lot of fragmentation in the tablespace, then this query may give you objects that still are able to grow. The above query is based on the largest free chunk in the tablespace available. If there are a lot of  'small' free chunks after each other, then Oracle will coalesce these to serve the extent allocation. 

Therefore it can be interesting to adapt the script in Note 1020182.6 'SCRIPT to detect tablespace fragmentation' to compare the next extent for each object with the 'contiguous' bytes (table space_temp) in the tablespace.

7.3 Indexes

The need to rebuild an index is very rare and often the coalescing the index is a better option. Please see the following article for a full explanation:

Reference:
Note 989093.1: Index Rebuild, the Need vs the Implications 
Note 989186.1: Script to investigate a b-tree index structure

8. AUTO vs MANUAL undo

Starting from Oracle 9i we introduced a new way of managing the before-images. Previously this was achieved through the RollBack Segments or also referred to as manual undo. Automatic undo is used when the UNDO_MANAGEMENT parameter is set to AUTO. When not set or set to MANUAL then we use the 'old' rollback segment mechanism. Although both versions are still available in current release, automatic undo is preferred.

8.1 AUTO UNDO

There is little to no configuration involved to AUM (Automatic Undo Management). You basically define the amount of time the before image needs to be kept available. This is controlled through the parameter UNDO_RETENTION, defined in seconds. So a value of 900 indicates 15 minutes.

It is important to realize that this value is not honored when we are under space pressure in the undo tablespace. 

Therefore the following formula can be used to calculate the optimal undo tablespace size:

Note 262066.1: How To Size UNDO Tablespace For Automatic Undo Management

Starting from Oracle 10g, you may choose to use the GUARANTEE option, to make sure the undo information does not get overwritten before the defined undo_retention time.

Note 311615.1: Oracle 10G new feature - Automatic Undo Retention Tuning

8.2 MANUAL UNDO

* Damaged rollback segments will prevent the instance to open the database. Only if names of rollback segments are known, corrective action can be taken. Therefore specify all the rollback segments in the 'rollback_segments' parameter in the init.ora

* Too small or not enough rollback segments can have serious impact on the behavior of your database. Therefore several issues must be taken into account. The following query will show you if there are not enough rollback segments online or if the rollback segments are too small.

SQL> select d.segment_name, d.tablespace_name, s.waits, s.shrinks,
s.wraps, s.status
from v$rollstat s, dba_rollback_segs d
where s.usn = d.segment_id
order by 1;

SEGMENT_NAME TABLESPACE_NAME WAITS SHRINKS WRAPS STATUS
--------------- ------------------ ----- --------- --------- --------
RB1 ROLLBACK_DATA 1 0 160 ONLINE
RB2 ROLLBACK_DATA 31 1 149 ONLINE
SYSTEM SYSTEM 0 0 0 ONLINE

The WAITS indicates which rollback segment headers had waits for them. Typically you would want to reduce such contention by adding rollback segments. 

If SHRINKS is non zero then the OPTIMAL parameter is set for that particular rollback segment, or a DBA explicitly issued a shrink on the rollback segment.
The number of shrinks indicates the number of times a rollback segment shrinked because a transaction has extended it beyond the OPTIMAL size. If this value is too high then the value of the OPTIMAL size should be increased as well as the overall size of the rollback segment (the value of minextents can be increased or the extent size itself, this depends mostly on the indications of the WRAPS column).

The WRAPS column indicate the number of times the rollback segment wrapped to another extent to serve the transaction. If this number is significant then you need to increase the extent size of the rollback segment.

Reference:
Note 62005.1 Creating, Optimizing, and Understanding Rollback Segments

9. Memory Management

This chapter is very version driven. Depending on which version you are running the option available will be different. Overtime Oracle has invested a great deal of time and effort in managing the memory more efficiently and transparently for the end-user. Therefore it is advisable to use the automation features as much as possible.

9.1 Pre Oracle 9i

The different memory components (SGA & PGA) needed to be defined at the startup of the database. These values were static. So if one of the memory components was too low the database needed to be restarted to make the changes effective. 
How to determine the optimal or best value for the different memory components is not covered in this note, since this would lead us too far. However a parameter that was often misused in these versions is the sort_area_size.

The 'sort_area_size' parameter in the init.ora defines the amount of memory that can be used for sorting. This value should be chosen carefully since this is part of the User Global Area (UGA) and therefore is allocated for each user individually. 
If there are a lot of concurrent users performing large sort operation on the database then the system can run out of memory.

E.g.: You have a sort_area_size of 1Mb, with 200 concurrent users on the database.  Although this memory is allocated dynamically, it can allocate up to 200Mb and therefore can cause extensive swapping on the system.

9.2 Oracle 9i

Starting from Oracle 9i we introduced the parameters: 

workarea_size_policy = [AUTO | MANUAL]
pga_aggregate_target =

This allows you define 1 pool for the PGA memory, which will be shared across sessions. 
When you often receive ORA-4030 errors, then this can be an indication that this value is specified too low.

9.3 Oracle 10g

Automatic Shared Memory Management (ASMM) was introduced in 10g. The automatic shared memory
management feature is enabled by setting the SGA_TARGET parameter to a non-zero value.

This feature has the advantage that you can share memory resources among the different components. 
Resources will be allocated and deallocated as needed by Oracle automatically.

Automatic PGA Memory management is still available through the 'workarea_size_policy' and 
'pga_aggregate_target' parameters.

9.4 Oracle 11g

Automatic Memory Management (AMM) is being introduced in 11g. This enables automatic tuning 
of PGA and SGA with use of two new parameters named MEMORY_MAX_TARGET and MEMORY_TARGET.

Reference:
Note 443746.1 Automatic Memory Management(AMM) on 11g

9.5 Oracle 12c

You can monitor SGA memory usage on pluggable databases using queries against database views.

Note 1516229.1 How to Monitor SGA Memory on Pluggable Database 

10. Logging & Tracing

10.1 Alert File

The alert log file of the database is written chronologically. Data is always appended and therefore this file can grow to an enormous size. It should be cleared or truncated on a regular basis, as a large alert file occupies unnecessary disk space and can slow down OS write performance to the file.


Pre-11g:

SQL> show parameter background_dump_dest

NAME TYPE VALUE
------------------------------ ------- ----------------------------------
background_dump_dest string D:\Oradata\Admin\PROD\Trace\BDump

11g and above:

SQL> show parameter diagnostic_dest

NAME TYPE VALUE
------------------------------ ------- ----------------------------------
diagnostic_dest string /oracle/admin/L111

 

10.2 Max_dump_file_size

Oracle Server processes generate trace files for certain errors or conflicts. These trace files are of use for further analyzing the problem. The init.ora parameter 'max_dump_file_size' limits the size of these trace files. The value of this parameter should be specified in Operating System blocks.
Make sure the disk space can handle the maximum size specified, if not then this value should be changed.

SQL> show parameter max_dump_file_size

NAME TYPE VALUE
---------------------------------- ------- ---------------------
max_dump_file_size integer 10240

 

10.3 User and core dump size parameters

The parameters 'user_dump_dest' and 'core_dump_dest' can contain a lot of trace information.
It is important to clear this directory at regular times as this can take up a significant amount of space.

Note: starting from Oracle 11g, this location is controlled by the 'diagnostic_dest' parameter

Reference:
Note 564989.1 How To Truncate a Background Trace File Without Bouncing the Database

10.4 Audit files

By default, every connection as SYS or SYSDBA is logged in an operating system file. 
The location is controlled through the parameter 'audit_file_dest'. If this parameter is not set then the location defaults to $ORACLE_HOME/rdbms/audit.
Overtime this directory may contain a lot of auditing information and can take up a significant amount of space.

11. Advanced Health Checking

The previous chapters have been outlining the basic items to check to prevent common database cavehats. In this section you will find references to several articles explaining how a more in depth analyses and monitoring can be achieved. These article mainly focus on Data Dictionary Integrity and DataBase structure verification.

Oracle Pre-11g:

Note 456468.1 - Identify Data Dictionary Inconsistency 
NOTE 136697.1 - "hcheck8i.sql" script to check for known problems in Oracle8i,Oracle9i, and Oracle10g


Oracle 11g

Note 466920.1: 11g New Feature Health monitor 

REFERENCES

NOTE:249664.1  - Pfile vs SPfile
NOTE:105120.1  - Advantages of Using Locally Managed vs Dictionary Managed Tablespaces
NOTE:115424.1  - How to Rename or Move Datafiles and Logfiles
NOTE:122555.1  - Determine How Much Disk Space is Needed for the Archive Files
NOTE:136697.1  - "hcheck.sql" script to check for known problems in Oracle8i, Oracle9i, Oracle10g and Oracle 11g
NOTE:147356.1  - How to Move Tables from One Tablespace to Another.
NOTE:112011.1  - ALERT: RESIZE or AUTOEXTEND can "Over-size" Datafiles and Corrupt the Dictionary
NOTE:262066.1  - How To Size UNDO Tablespace For Automatic Undo Management
NOTE:262472.1  - 10g: BIGFILE Type Tablespaces Versus SMALLFILE Type
NOTE:311615.1  - Oracle 10G new feature - Automatic Undo Retention Tuning
NOTE:329984.1  - Usage and Storage Management of SYSAUX tablespace occupants SM/AWR, SM/ADVISOR, SM/OPTSTAT and SM/OTHER
NOTE:443746.1  - Automatic Memory Management (AMM) on 11g
NOTE:456468.1  - Identify Data Dictionary Inconsistency


NOTE:62005.1  - Creating, Optimizing, and Understanding Rollback Segments
NOTE:69739.1  - How to Turn Archiving ON and OFF in Oracle RDBMS
NOTE:564989.1  - How To Truncate a Background Trace File Without Bouncing the Database
NOTE:93771.1  - Introduction to Locally-Managed Tablespaces
NOTE:1012431.6  - Overview of Database Fragmentation in Oracle 7
NOTE:1020182.6  - Script to Detect Tablespace Fragmentation
NOTE:102995.1  - Maintenance of Online Redo Log Groups and Members

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/20747382/viewspace-2131497/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/20747382/viewspace-2131497/