第8章 链路聚合和桥接2020-06-14

第8章 链路聚合和桥接    快乐记录

nmcli connection add type team con-name qinteamfile ifname qinteamdevice config '{"runner":{"name":"activebackup"}}'    添加一个大网卡模式是activebackup

nmcli connection show    要是设备没出来就删了再来一边

nmcli connection delete qinteamfile

nmcli connection modify qinteamfile ipv4.method manual ipv4.addresses "192.168.100.88/24 192.168.100.1" ipv4.dns 192.168.100.1 connection.autoconnect yes    给大网卡配置ip，dns

nmcli connection add type team-slave con-name qinteamslave1 ifname eno33554984 master qinteamdevice     给大王卡配置子网卡

nmcli connection add type team-slave con-name qinteamslave2 ifname enoxxxxxxxx master qinteamdevice     给大王卡配置子网卡

nmcli connection down qinteamfile    down主配置文件

nmcli connection up qinteamfile     up主配置文件

nmcli connection up qinteamslave1    up子配置文件

nmcli connection up qinteamslave2    up子配置文件

Mac地址一样了

查看设备状态

查看当前激活的端口

查看设备端口

主备模式，断了一张网卡自动切换到另一张备用网卡

//////////////////////////////////桥接

nmcli connection add type bridge con-name qinbrfile ifname qinbrdevice    桥接网卡

nmcli connection modify qinbrfile ipv4.method manual ipv4.addresses "192.168.100.88/24 192.168.100.1" ipv4.dns 192.168.100.1 connection.autoconnect yes    配置桥接网卡

nmcli connection add type bridge-slave con-name qinbrslave ifname eno16777736 master qinbrdevice    添加子网卡

nmcli connection down qinbrfile

nmcli connection up qinbrfile    启动桥接网卡

nmcli connection up qinbrslave     启动子网卡

nmcli connection show     查看一下

ping -I qinbrdevice 192.168.100.2    测试通过qinbrdevice设备ping 192.168.100.2