CK_Label_V9 System Developer‘s Manual

Roadway Lights Registration

Place the magnet near the area of the barcode to trigger the Roadway Lights register to the system

Registration success: red light to green light, and then turn off.

Query Roadway Lights Information

Introduction to the API：

Query Roadway Lightss information

Basic Information：

Attributes	接口信息
Status	Finished
URL	http://localhost/wms/associate/queryIndicates
Request Method	GET/POST
Content-Type	multipart/form-data

Request parameters：

Parameter Description：

Attributes	Value	Required	Comment
Body transmits the collection of router ids [1828,1829], and query all if you sendd the blank []

Request example

[1828]

Response parameters：

Attributes	Value	Types	Comment
mac	"99.97.36.55"	string	Tag mac/Tag ID
hardwareVersion	"5.1"	string	Hardware version
manufacture	CWR000001	string	ID of BindRouter
productionBatch	22-05-06	int	Signal strength (-100 ~ 0)
routerId	1828	int	ID of BindRouter
rssi	-14	int	Signal strength (-100 ~ 0)
screenType	0	int	No use
serialNumber	"CNSHZH23125"	string	No use
softwareVersion	"1.5"	string	Software version
state	true	bool	No use
status	1	int	Status of Tags

Response example：

{ "datalist": [ { "hardwareVersion": "5.1", "mac": "99.88.06.83", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.89.19.44", "manufacture": "CoreWind0", "productionBatch": "20-09-09", "routerId": 1828, "rssi": -15, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.4", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.88.06.86", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 } ], "resultCode": 10, "resultMsg": "success"}

{ "datalist": [ { "hardwareVersion": "5.1", "mac": "99.88.06.83", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.89.19.44", "manufacture": "CoreWind0", "productionBatch": "20-09-09", "routerId": 1828, "rssi": -15, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.4", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.88.06.86", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 } ], "resultCode": 10, "resultMsg": "success"}

Light Roadway Lights

Introduction to the API：

Light Roadway Lights all PTL tags information

Basic Information：

Attributes	接口信息
Status	Finished
URL	http://localhost/wms/associate/ctrlShelfIndicator
Request Method	POST
Content-Type	application/json

Request parameters：

Parameter Description：

Attributes	Types	Required	Comment
mac	string	yes	Tag mac / Tag ID
timeout	int	yes	Lighting timeout time(s);0 : never turn offn : turn off autoAutomatically after n seconds
ledrgb	string	yes	red：ff0000; red Led Ongreen：ff00；green Led Onyellow：ffff00; yellow Led On
ledmode	int	Yes	lightint mode;0, always on1, quick flash2, slow flash3, turn of the light according ledrgb4. turn off the lights all
buzzer	int	yes	0：Buzzer off，1：Buzzer on
reserve	string	optional	reserve

Raw example：

[{"mac":"99.29.03.13","timeout":0,"ledrgb":"ffff00","ledmode":0,"buzzer":0,"cmdtoken":"123456","reserve":"reserve"},{"mac":"99.29.05.33","timeout":0,"ledrgb":"ff00ff","ledmode":0,"buzzer":0,"cmdtoken":"123456","reserve":"reserve"}]

Response example：

true

Callback of Light Roadway Lights Result

Introduction to the API：

Notification the result of Light Roadway Lights

Basic Information：

Attributes	接口信息
Status	Finished
URL	URL of user's callback API
Request Method	POST
Content-Type	application/json

Request parameters：

Parameter Description：

parameter name	example value	Type	Parameter Description
mac	99.99.08.51	string	Tag ID
power	100	int	surplus power（0~100）
result	true	bool	true: Light onfalse:Light failed
lednum	1	int	Led num
cmdtoken		string
message	数据成功	string	数据成功；(send ok)数据失败；(send failed)数据发送超时；(send timeout)唤醒失败；(wake up failed)基站不在线；(router offline)数据异常；(Abnormal data)数据格式不正确，解析失败；(incorrect data format)参数格式不正确或参数不全;(Missing required parameters)无法执行;(Unable to execute)标签不存在；(Tag does not exist)

Parameters example：

{"mac":"99.99.08.51","result":true,"power":100,"lednum":1,"cmdtoken":"55555","message":"数据成功"}

Setting URL of user's callback API

Login wms system with admin user，go to “System Information”->“Third-party configuration”，you can config the Callback URL here:

反馈类型	描述	地址
Callback of Light Leds Result	ctrlShelfIndicatorResult	URL of user's callback API(CK_Label_V9)