rime中州韵小狼毫 日期/农历 时间 事件 节气 滤镜

网络上但凡提到 rime中州韵小狼毫须鼠管输入法，总少不了智能时间，日期等炫技，可见这个便捷时间/日期输入功能是多么的受欢迎。作者也不落窠臼，今天为大家带来的分享就是 时间日期 滤镜。

先睹为快

在正文开始前，我们一起欣赏一下最终的效果吧。

注： 本文所分享的dateTime_Filter滤镜，与输入方案无关，可以在拼音，五笔，双拼等输入方案中起到同样的功能梯中效果。

时间输入效果：

日期输入效果：

周序输入效果：

事件提醒效果：

农历与节气效果：

以上是主要的功能效果了，其它更多的细节性功能，各位看官自行发掘吧。

农历与二十四节气

为了实现农历日期与二十四节气信息的检索，我们需要计算二十四节气的时间，以及需要计算农历日期与阳历日期的映射关系，为此，我们需要以下 lunarjieQiModule.lua 和 lunarModule.lua 两个脚本。

lunarjieQiModule.lua

lunarjieQiModule.lua 脚本文档实现了二十四节气的计算功能， lunarjieQiModule.lua 文档的脚本内容如下：

--该计算脚本取自 博文 https://www.cnblogs.com/moodlxs/archive/2012/09/15/2686472.html
--感谢博主 绿色冰点 对脚本的贡献和分享

local dbgFlg = false

local function setDbg(flg, printPrefix)
	dbgFlg = flg
	if nil == printPrefix then
		printPrefix = ''
	end
	
	if flg then
		print(printPrefix..'flg in lunar is true')
	end
end

--节气表
local jqB={"春分","清明","谷雨","立夏","小满","芒种","夏至","小暑","大暑","立秋","处暑","白露","秋分","寒露","霜降","立冬","小雪","大雪","冬至","小寒","大寒","立春","雨水","惊蛰"}
local yueMing={"正","二","三","四","五","六","七","八","九","十","冬","腊"}

--存储以当前日期所在年分为中心，前后各1年，共3年的节气数据，以及对应的节气名
local jq3Y={}
local jqN3Y={}

--*******农历节气计算部分
--========角度变换===============
--每弧度的角秒数
local rad = 180*3600/math.pi
--每弧度的角度数
local RAD = 180/math.pi
--取整数部分
local function int2(v)
	v=math.floor(v)
	if v<0 then
		return v+1
	else
		return v
	end
end

--对超过0-2PI的角度转为0-2PI
local function rad2mrad(v)
	v=math.fmod(v ,2*math.pi)
	if v<0 then
		return v+2*math.pi
	else
		return v
	end
end

--将弧度转为字串
local function rad2str(d,tim)
	---tim=0输出格式示例: -23°59' 48.23"
	---tim=1输出格式示例:  18h 29m 44.52s
	local s="+"
	local w1="°" w2="’"  w3="”"
	if d<0 then
		d=-d
		s='-'
	end
	if tim~= 0 then
		d=d*12/math.pi
		w1="h "
		w2="m "
		w3="s "
	else
		d=d*180/math.pi
	end
	local a=math.floor(d) d=(d-a)*60
	local b=math.floor(d) d=(d-b)*60
	local c=math.floor(d) d=(d-c)*100
	d=math.floor(d+0.5)
	if d>=100 then
		d=d-100
		c=c+1
	end
	if c>=60 then
		c=c-60
		b=b+1
	end
	if b>=60 then
		b=b-60
		a=a+1
	end
	a="   "+a
	b="0"+b
	c="0"+c
	d="0"+d
	local alen = string.len(a)
	local blen = string.len(b)
	local clen = string.len(c)
	local dlen = string.len(d)
	s = s..string.sub(a, alen-3,alen)+w1
	s = s..string.sub(b, blen-2,blen)+w2
	s = s..string.sub(c, clen-2,clen)+"."
	s = s..string.sub(d, dlen-2,dlen)+w3
	
	return s
end

--================日历计算===============
--2000年前儒略日数(2000-1-1 12:00:00格林威治平时)
local J2000=2451545

--日期元件
local JDate={
	Y=2000, M=1, D=1, h=12, m=0, s=0,
	--世界时与原子时之差计算表
	dts = {-4000,108371.7,-13036.80,392.000, 0.0000, -500, 17201.0, -627.82, 16.170,-0.3413,
			-150, 12200.6, -346.41, 5.403,-0.1593, 150, 9113.8, -328.13, -1.647, 0.0377,
			500, 5707.5, -391.41, 0.915, 0.3145, 900, 2203.4, -283.45, 13.034,-0.1778,
			1300, 490.1, -57.35, 2.085,-0.0072, 1600, 120.0, -9.81, -1.532, 0.1403,
			1700, 10.2, -0.91, 0.510,-0.0370, 1800, 13.4, -0.72, 0.202,-0.0193,
			1830, 7.8, -1.81, 0.416,-0.0247, 1860, 8.3, -0.13, -0.406, 0.0292,
			1880, -5.4, 0.32, -0.183, 0.0173, 1900, -2.3, 2.06, 0.169,-0.0135,
			1920, 21.2, 1.69, -0.304, 0.0167, 1940, 24.2, 1.22, -0.064, 0.0031,
			1960, 33.2, 0.51, 0.231,-0.0109, 1980, 51.0, 1.29, -0.026, 0.0032,
			2000, 64.7, -1.66, 5.224,-0.2905, 2150, 279.4, 732.95,429.579, 0.0158, 6000},
	--计算世界时与原子时之差,传入年
	deltatT = function(JDate,y)
		local i
		local d=JDate.dts
		for x=1,100, 5 do
			if y<d[x+5] or x==96 then
				i=x
				break
			end
		end
		local t1=(y-d[i])/(d[i+5]-d[i])*10
		local t2=t1*t1
		local t3=t2*t1
		
		return d[i+1] +d[i+2]*t1 +d[i+3]*t2 +d[i+4]*t3
	end,
	--传入儒略日(J2000起算),计算UTC与原子时的差(单位:日)
	deltatT2 = function(JDate,jd,info)
		return JDate:deltatT(jd/365.2425+2000)/86400.0
	end,
	--公历转儒略日,UTC=1表示原日期是UTC
	toJD = function(JDate,UTC)
		--取出年月
		local  y=JDate.Y m=JDate.M n=0
		if m<=2 then
			m=m+12
			y=y-1
		end
		--判断是否为格里高利历日1582*372+10*31+15
		if JDate.Y*372+JDate.M*31+JDate.D>=588829 then
			--加百年闰
			n =int2(y/100) n =2-n+int2(n/4)
		end
		--加上年引起的偏移日数
		n = n + int2(365.2500001*(y+4716))
		--加上月引起的偏移日数及日偏移数
		n = n + int2(30.6*(m+1))+JDate.D
		n = n + ((JDate.s/60+JDate.m)/60+JDate.h)/24 - 1524.5
		if(UTC == 1) then
			return n+JDate:deltatT2(n-J2000,'142')
		else
			return n
		end
	end,
	--儒略日数转公历,UTC=1表示目标公历是UTC
	setFromJD = function(JDate,jd,UTC)
		if UTC==1 then
			jd= jd - JDate:deltatT2(jd-J2000,'150')
		end
		jd=jd+0.5
		--取得日数的整数部份A及小数部分F
		local A=int2(jd)
		local F=jd-A
		local D=0
		if A>2299161 then
			D=int2((A-1867216.25)/36524.25)
			A=A+1+D-int2(D/4)
		end
		--向前移4年零2个月
		A = A + 1524
		--年
		JDate.Y =int2((A-122.1)/365.25)
		--去除整年日数后余下日数
		D =A-int2(365.25*JDate.Y)
		--月数
		JDate.M =int2(D/30.6001)
		--去除整月日数后余下日数
		JDate.D =D-int2(JDate.M*30.6001)
		JDate.Y=JDate.Y-4716 JDate.M=JDate.M-1
		if JDate.M>12 then
			JDate.M=JDate.M - 12
		end
		if JDate.M<=2 then
			JDate.Y = JDate.Y+1
		end
		--日的小数转为时分秒
		F=F*24 JDate.h=int2(F)
		F=F - JDate.h
		F=F*60 JDate.m=int2(F)
		F=F - JDate.m
		F=F*60 JDate.s=F
	end,
	--设置时间,参数例:"20000101 120000"或"20000101"
	setFromStr = function(JDate, s)
		JDate.Y=string.sub(s, 1,4)
		JDate.M=string.sub(s, 5, 6)
		JDate.D=string.sub(s,7, 8)
		JDate.h=string.sub(s, 10, 11)
		JDate.m=string.sub(s, 12,13)
		JDate.s=string.sub(s, 14,18)
	end,
	--日期转为串
	toStr = function(JDate)
		local Y="0"..JDate.Y
		local M="0"..JDate.M
		local D="0"..JDate.D
		local h=JDate.h
		local m=JDate.m
		local s=math.floor(JDate.s+.5)
		if s>=60 then
			s=s-60
			m=m+1
		end
		if m>=60 then
			m=m-60
			h=h+1
		end
		h="0".. h
		m="0"..m
		s="0"..s
		local Ylen = string.len(Y)
		local Mlen = string.len(M)
		local Dlen = string.len(D)
		local hlen = string.len(h)
		local mlen = string.len(m)
		local slen = string.len(s)
		Y=string.sub(Y, Ylen-3,Ylen)
		M=string.sub(M, Mlen-1,Mlen)
		D=string.sub(D,Dlen-1, Dlen)
		h=string.sub(h, hlen-1, hlen)
		m=string.sub(m, mlen-1,mlen)
		s=string.sub(s, slen-1,slen)
		return Y.."-"..M.."-"..D.." "..h..":"..m..":"..s
	end,
	--输出节气日期的秒数
	JQ = function(JDate)
		local t = {}
		t.year=JDate.Y
		t.month=JDate.M
		t.day=JDate.D
		t.hour=JDate.h
		t.min=JDate.m
		t.sec=math.floor(JDate.s+.5)
		if t.sec>=60 then
			t.sec=t.sec-60
			t.min=t.min+1
		end
		if t.min>=60 then
			t.min=t.min-60
			t.hour=t.hour+1
		end
		return os.time(t)
	end,
	--算出:jd 转到当地UTC后,UTC日数的整数部分或小数部分
	Dint_dec = function(JDate,jd,shiqu,int_dec)
		--基于J2000力学时jd的起算点是12:00:00时,所以跳日时刻发生在12:00:00,这与日历计算发生矛盾
		--把jd改正为00:00:00起算,这样儒略日的跳日动作就与日期的跳日同步
		--改正方法为jd=jd+0.5-deltatT+shiqu/24
		--把儒略日的起点移动-0.5(即前移12小时)
		--式中shiqu是时区,北京的起算点是-8小时,shiqu取8
		local u=jd+0.5-JDate:deltatT2(jd,'252')+shiqu/24
		if int_dec~= 0 then
			--返回整数部分
			return math.floor(u)
		else
			--返回小数部分
			return u-math.floor(u)
		end
	end,
	--计算两个日期的相差的天数,输入字串格式日期,如:"20080101"
	d1_d2 = function(JDate,d1,d2)
		--备份原来的数据
		local Y=JDate.Y 
		local M=JDate.M
		local D=JDate.D
		local h=JDate.h
		local m=JDate.m
		local s=JDate.s
		JDate.setFromStr(string.sub(d1,1,8)+" 120000")
		local jd1=JDate.toJD(0)
		JDate.setFromStr(string.sub(d2,1,8)+" 120000")
		local jd2=JDate.toJD(0)
		
		--还原
		JDate.Y=Y
		JDate.M=M
		JDate.D=D
		JDate.h=h
		JDate.m=m
		JDate.s=s
		if jd1>jd2 then
			return  math.floor(jd1-jd2+.0001)
		else
			return -Math.floor(jd2-jd1+.0001)
		end
	end,
}

--=========黄赤交角及黄赤坐标变换===========
--黄赤交角系数表
local hcjjB = {84381.448, -46.8150, -0.00059, 0.001813}
--Date黄道上的岁差p
local preceB= {0,50287.92262,111.24406,0.07699,-0.23479,-0.00178,0.00018,0.00001}

--返回黄赤交角(常规精度),短期精度很高
local function hcjj1 (t)
	local t1=t/36525 
	local t2=t1*t1
	local t3=t2*t1
	return (hcjjB[1] +hcjjB[2]*t1 +hcjjB[3]*t2 +hcjjB[4]*t3)/rad
end

--黄赤转换(黄赤坐标旋转)
local function HCconv(JW,E)
	--黄道赤道坐标变换,赤到黄E取负
	local HJ=rad2mrad(JW[1])
	local HW=JW[2]
	local sinE =math.sin(E)
	local cosE =math.cos(E)
	local sinW=cosE*math.sin(HW)+sinE*math.cos(HW)*math.sin(HJ)
	local J=math.atan2( math.sin(HJ)*cosE-math.tan(HW)*sinE, math.cos(HJ))
	JW[1]=rad2mrad(J)
	JW[2]=math.asin(sinW)
end

--补岁差
local function addPrece(jd,zb)
	local i
	local t=1
	local v=0
	local t1=jd/365250
	for i=2,8 do
		t=t*t1
		v=v+preceB[i]*t
	end
	zb[1]=rad2mrad(zb[1]+(v+2.9965*t1)/rad)
end

--===============光行差==================
--离心率
local GXC_e={0.016708634, -0.000042037,-0.0000001267}
--近点
local GXC_p={102.93735/RAD,1.71946/RAD, 0.00046/RAD}
--太平黄经
local GXC_l={280.4664567/RAD,36000.76982779/RAD,0.0003032028/RAD,1/49931000/RAD,-1/153000000/RAD}
--光行差常数
local GXC_k=20.49552/rad
--恒星周年光行差计算(黄道坐标中)
local function addGxc(t,zb)
	local t1=t/36525
	local t2=t1*t1
	local t3=t2*t1
	local t4=t3*t1
	local L=GXC_l[1] +GXC_l[2]*t1 +GXC_l[3]*t2 +GXC_l[4]*t3 +GXC_l[5]*t4
	local p=GXC_p[1] +GXC_p[2]*t1 +GXC_p[3]*t2
	local e=GXC_e[1] +GXC_e[2]*t1 +GXC_e[3]*t2
	local dL=L-zb[1]
	local dP=p-zb[1]
	zb[1]=zb[1] - (GXC_k * (math.cos(dL)-e*math.cos(dP)) / math.cos(zb[2]))
	zb[2]=zb[2] - (GXC_k * math.sin(zb[2]) * (math.sin(dL)-e*math.sin(dP)))
	--print('aa', L,p,e,dL,dP,zb[1], zb[2])
	zb[1]=rad2mrad(zb[1])
end

--===============章动计算==================
--章动表
local nutB={2.1824391966, -33.757045954, 0.0000362262, 3.7340E-08,-2.8793E-10,-171996,-1742,92025, 89,
			3.5069406862, 1256.663930738, 0.0000105845, 6.9813E-10,-2.2815E-10, -13187, -16, 5736,-31,
			1.3375032491, 16799.418221925,-0.0000511866, 6.4626E-08,-5.3543E-10, -2274, -2, 977, -5,
			4.3648783932, -67.514091907, 0.0000724525, 7.4681E-08,-5.7586E-10, 2062, 2, -895, 5,
			0.0431251803, -628.301955171, 0.0000026820, 6.5935E-10, 5.5705E-11, -1426, 34, 54, -1,
			2.3555557435, 8328.691425719, 0.0001545547, 2.5033E-07,-1.1863E-09, 712, 1, -7, 0,
			3.4638155059, 1884.965885909, 0.0000079025, 3.8785E-11,-2.8386E-10, -517, 12, 224, -6,
			5.4382493597, 16833.175267879,-0.0000874129, 2.7285E-08,-2.4750E-10, -386, -4, 200, 0,
			3.6930589926, 25128.109647645, 0.0001033681, 3.1496E-07,-1.7218E-09, -301, 0, 129, -1,
			3.5500658664, 628.361975567, 0.0000132664, 1.3575E-09,-1.7245E-10, 217, -5, -95, 3}

--计算黄经章动及交角章动
local function nutation(t)
	local d={}
	d.Lon=0
	d.Obl=0
	t=t/36525
	local i,c
	local t1=t
	local t2=t1*t1
	local t3=t2*t1
	local t4=t3*t1
	local t5=t4*t1
	for i=1,#nutB,9 do
		c=nutB[i] +nutB[i+1]*t1 +nutB[i+2]*t2 +nutB[i+3]*t3 +nutB[i+4]*t4
		--黄经章动
		d.Lon=d.Lon + (nutB[i+5]+nutB[i+6]*t/10)*math.sin(c)
		--交角章动
		d.Obl=d.Obl + (nutB[i+7]+nutB[i+8]*t/10)*math.cos(c)
	end
	--黄经章动
	d.Lon=d.Lon/(rad*10000)
	--交角章动
	d.Obl=d.Obl/(rad*10000)
	return d
end

--本函数计算赤经章动及赤纬章动
local function nutationRaDec(t,zb)
	local Ra=zb[1]
	local Dec=zb[2]
	local E=hcjj1(t)
	local sinE=math.sin(E)
	--计算黄赤交角
	local cosE=math.cos(E)
	--计算黄经章动及交角章动
	local d=nutation(t)
	local cosRa=math.cos(Ra)
	local sinRa=math.sin(Ra)
	local tanDec=math.tan(Dec)
	--赤经章动
	zb[1]=zb[1] + (cosE+sinE*sinRa*tanDec)*d.Lon-cosRa*tanDec*d.Obl
	--赤纬章动
	zb[2]= zb[2] + sinE*cosRa*d.Lon+sinRa*d.Obl
	zb[1]=rad2mrad(zb[1])
end

--=================以下是月球及地球运动参数表===================
--[[***************************************
* 如果用记事本查看此代码,请在"格式"菜单中去除"自动换行"
* E10是关于地球的,格式如下:
*	它是一个数组,每3个数看作一条记录,每条记录的3个数记为A,B,C
*	rec=A*cos(B+C*t)  式中t是J2000起算的儒略千年数
*	每条记录的计算结果(即rec)取和即得地球的日心黄经的周期量L0
* E11格式如下: rec = A*cos*(B+C*t) *t, 取和后得泊松量L1
* E12格式如下: rec = A*cos*(B+C*t) *t*t, 取和后得泊松量L2
* E13格式如下: rec = A*cos*(B+C*t) *t*t*t, 取和后得泊松量L3
* 最后地球的地心黄经:L = L0+L1+L2+L3+...
* E20,E21,E22,E23...用于计算黄纬
* M10,M11等是关于月球的,参数的用法请阅读Mnn()函数
***************************************** --]]
--地球运动VSOP87参数
--黄经周期项
local E10={1.75347045673, 0.00000000000, 0.0000000000, 0.03341656456, 4.66925680417, 6283.0758499914, 0.00034894275, 4.62610241759, 12566.1516999828, 0.00003417571, 2.82886579606, 3.5231183490,
			0.00003497056, 2.74411800971, 5753.3848848968, 0.00003135896, 3.62767041758, 77713.7714681205, 0.00002676218, 4.41808351397, 7860.4193924392, 0.00002342687, 6.13516237631, 3930.2096962196,
			0.00001273166, 2.03709655772, 529.6909650946, 0.00001324292, 0.74246356352, 11506.7697697936, 0.00000901855, 2.04505443513, 26.2983197998, 0.00001199167, 1.10962944315, 1577.3435424478,
			0.00000857223, 3.50849156957, 398.1490034082, 0.00000779786, 1.17882652114, 5223.6939198022, 0.00000990250, 5.23268129594, 5884.9268465832, 0.00000753141, 2.53339053818, 5507.5532386674,
			0.00000505264, 4.58292563052, 18849.2275499742, 0.00000492379, 4.20506639861, 775.5226113240, 0.00000356655, 2.91954116867, 0.0673103028, 0.00000284125, 1.89869034186, 796.2980068164,
			0.00000242810, 0.34481140906, 5486.7778431750, 0.00000317087, 5.84901952218, 11790.6290886588, 0.00000271039, 0.31488607649, 10977.0788046990, 0.00000206160, 4.80646606059, 2544.3144198834,
			0.00000205385, 1.86947813692, 5573.1428014331, 0.00000202261, 2.45767795458, 6069.7767545534, 0.00000126184, 1.08302630210, 20.7753954924, 0.00000155516, 0.83306073807, 213.2990954380,
			0.00000115132, 0.64544911683, 0.9803210682, 0.00000102851, 0.63599846727, 4694.0029547076, 0.00000101724, 4.26679821365, 7.1135470008, 0.00000099206, 6.20992940258, 2146.1654164752,
			0.00000132212, 3.41118275555, 2942.4634232916, 0.00000097607, 0.68101272270, 155.4203994342, 0.00000085128, 1.29870743025, 6275.9623029906, 0.00000074651, 1.75508916159, 5088.6288397668,
			0.00000101895, 0.97569221824, 15720.8387848784, 0.00000084711, 3.67080093025, 71430.6956181291, 0.00000073547, 4.67926565481, 801.8209311238, 0.00000073874, 3.50319443167, 3154.6870848956,
			0.00000078756, 3.03698313141, 12036.4607348882, 0.00000079637, 1.80791330700, 17260.1546546904, 0.00000085803, 5.98322631256,161000.6857376741, 0.00000056963, 2.78430398043, 6286.5989683404,
			0.00000061148, 1.81839811024, 7084.8967811152, 0.00000069627, 0.83297596966, 9437.7629348870, 0.00000056116, 4.38694880779, 14143.4952424306, 0.00000062449, 3.97763880587, 8827.3902698748,
			0.00000051145, 0.28306864501, 5856.4776591154, 0.00000055577, 3.47006009062, 6279.5527316424, 0.00000041036, 5.36817351402, 8429.2412664666, 0.00000051605, 1.33282746983, 1748.0164130670,
			0.00000051992, 0.18914945834, 12139.5535091068, 0.00000049000, 0.48735065033, 1194.4470102246, 0.00000039200, 6.16832995016, 10447.3878396044, 0.00000035566, 1.77597314691, 6812.7668150860,
			0.00000036770, 6.04133859347, 10213.2855462110, 0.00000036596, 2.56955238628, 1059.3819301892, 0.00000033291, 0.59309499459, 17789.8456197850, 0.00000035954, 1.70876111898, 2352.8661537718}
--黄经泊松1项
local E11={6283.31966747491,0.00000000000, 0.0000000000, 0.00206058863, 2.67823455584, 6283.0758499914, 0.00004303430, 2.63512650414, 12566.1516999828, 0.00000425264, 1.59046980729, 3.5231183490,
			0.00000108977, 2.96618001993, 1577.3435424478, 0.00000093478, 2.59212835365, 18849.2275499742, 0.00000119261, 5.79557487799, 26.2983197998, 0.00000072122, 1.13846158196, 529.6909650946,
			0.00000067768, 1.87472304791, 398.1490034082, 0.00000067327, 4.40918235168, 5507.5532386674, 0.00000059027, 2.88797038460, 5223.6939198022, 0.00000055976, 2.17471680261, 155.4203994342,
			0.00000045407, 0.39803079805, 796.2980068164, 0.00000036369, 0.46624739835, 775.5226113240, 0.00000028958, 2.64707383882, 7.1135470008, 0.00000019097, 1.84628332577, 5486.7778431750,
0.00000020844, 5.34138275149, 0.9803210682, 0.00000018508, 4.96855124577, 213.2990954380, 0.00000016233, 0.03216483047, 2544.3144198834, 0.00000017293, 2.99116864949, 6275.9623029906}
--黄经泊松2项
local E12={0.00052918870, 0.00000000000, 0.0000000000, 0.00008719837, 1.07209665242, 6283.0758499914, 0.00000309125, 0.86728818832, 12566.1516999828, 0.00000027339, 0.05297871691, 3.5231183490,
			0.00000016334, 5.18826691036, 26.2983197998, 0.00000015752, 3.68457889430, 155.4203994342, 0.00000009541, 0.75742297675, 18849.2275499742, 0.00000008937, 2.05705419118, 77713.7714681205,
			0.00000006952, 0.82673305410, 775.5226113240, 0.00000005064, 4.66284525271, 1577.3435424478}
local E13={0.00000289226, 5.84384198723, 6283.0758499914, 0.00000034955, 0.00000000000, 0.0000000000, 0.00000016819, 5.48766912348, 12566.1516999828}
local E14={0.00000114084, 3.14159265359, 0.0000000000, 0.00000007717, 4.13446589358, 6283.0758499914, 0.00000000765, 3.83803776214, 12566.1516999828}
local E15={0.00000000878, 3.14159265359, 0.0000000000 }
--黄纬周期项
local E20={0.00000279620, 3.19870156017, 84334.6615813083, 0.00000101643, 5.42248619256, 5507.5532386674, 0.00000080445, 3.88013204458, 5223.6939198022, 0.00000043806, 3.70444689758, 2352.8661537718,
			0.00000031933, 4.00026369781, 1577.3435424478, 0.00000022724, 3.98473831560, 1047.7473117547, 0.00000016392, 3.56456119782, 5856.4776591154, 0.00000018141, 4.98367470263, 6283.0758499914,
			0.00000014443, 3.70275614914, 9437.7629348870, 0.00000014304, 3.41117857525, 10213.2855462110}
local E21={0.00000009030, 3.89729061890, 5507.5532386674, 0.00000006177, 1.73038850355, 5223.6939198022}
--距离周期项
local E30={1.00013988799, 0.00000000000, 0.0000000000, 0.01670699626, 3.09846350771, 6283.0758499914, 0.00013956023, 3.05524609620, 12566.1516999828, 0.00003083720, 5.19846674381, 77713.7714681205,
			0.00001628461, 1.17387749012, 5753.3848848968, 0.00001575568, 2.84685245825, 7860.4193924392, 0.00000924799, 5.45292234084, 11506.7697697936, 0.00000542444, 4.56409149777, 3930.2096962196}
local E31={0.00103018608, 1.10748969588, 6283.0758499914, 0.00001721238, 1.06442301418, 12566.1516999828, 0.00000702215, 3.14159265359, 0.0000000000}
local E32={0.00004359385, 5.78455133738, 6283.0758499914 }
local E33={0.00000144595, 4.27319435148, 6283.0758499914 }
--月球运动参数
local M10={22639.5858800, 2.3555545723, 8328.6914247251, 1.5231275E-04, 2.5041111E-07,-1.1863391E-09, 4586.4383203, 8.0413790709, 7214.0628654588,-2.1850087E-04,-1.8646419E-07, 8.7760973E-10, 2369.9139357, 10.3969336431, 15542.7542901840,-6.6188121E-05, 6.3946925E-08,-3.0872935E-10, 769.0257187, 4.7111091445, 16657.3828494503, 3.0462550E-04, 5.0082223E-07,-2.3726782E-09,
			-666.4175399, -0.0431256817, 628.3019552485,-2.6638815E-06, 6.1639211E-10,-5.4439728E-11, -411.5957339, 3.2558104895, 16866.9323152810,-1.2804259E-04,-9.8998954E-09, 4.0433461E-11, 211.6555524, 5.6858244986, -1114.6285592663,-3.7081362E-04,-4.3687530E-07, 2.0639488E-09, 205.4359530, 8.0845047526, 6585.7609102104,-2.1583699E-04,-1.8708058E-07, 9.3204945E-10,
			191.9561973, 12.7524882154, 23871.4457149091, 8.6124629E-05, 3.1435804E-07,-1.4950684E-09, 164.7286185, 10.4400593249, 14914.4523349355,-6.3524240E-05, 6.3330532E-08,-2.5428962E-10, -147.3213842, -2.3986802540, -7700.3894694766,-1.5497663E-04,-2.4979472E-07, 1.1318993E-09, -124.9881185, 5.1984668216, 7771.3771450920,-3.3094061E-05, 3.1973462E-08,-1.5436468E-10,
			-109.3803637, 2.3124288905, 8956.9933799736, 1.4964887E-04, 2.5102751E-07,-1.2407788E-09, 55.1770578, 7.1411231536, -1324.1780250970, 6.1854469E-05, 7.3846820E-08,-3.4916281E-10, -45.0996092, 5.6113650618, 25195.6237400061, 2.4270161E-05, 2.4051122E-07,-1.1459056E-09, 39.5333010, -0.9002559173, -8538.2408905558, 2.8035534E-04, 2.6031101E-07,-1.2267725E-09,
			38.4298346, 18.4383127140, 22756.8171556428,-2.8468899E-04,-1.2251727E-07, 5.6888037E-10, 36.1238141, 7.0666637168, 24986.0742741754, 4.5693825E-04, 7.5123334E-07,-3.5590172E-09, 30.7725751, 16.0827581417, 14428.1257309177,-4.3700174E-04,-3.7292838E-07, 1.7552195E-09, -28.3971008, 7.9982533891, 7842.3648207073,-2.2116475E-04,-1.8584780E-07, 8.2317000E-10,
			-24.3582283, 10.3538079614, 16171.0562454324,-6.8852003E-05, 6.4563317E-08,-3.6316908E-10, -18.5847068, 2.8429122493, -557.3142796331,-1.8540681E-04,-2.1843765E-07, 1.0319744E-09, 17.9544674, 5.1553411398, 8399.6791003405,-3.5757942E-05, 3.2589854E-08,-2.0880440E-10, 14.5302779, 12.7956138971, 23243.1437596606, 8.8788511E-05, 3.1374165E-07,-1.4406287E-09,
			14.3796974, 15.1080427876, 32200.1371396342, 2.3843738E-04, 5.6476915E-07,-2.6814075E-09, 14.2514576,-24.0810366320, -2.3011998397, 1.5231275E-04, 2.5041111E-07,-1.1863391E-09, 13.8990596, 20.7938672862, 31085.5085803679,-1.3237624E-04, 1.2789385E-07,-6.1745870E-10, 13.1940636, 3.3302699264, -9443.3199839914,-5.2312637E-04,-6.8728642E-07, 3.2502879E-09,
			-9.6790568, -4.7542348263,-16029.0808942018,-3.0728938E-04,-5.0020584E-07, 2.3182384E-09, -9.3658635, 11.2971895604, 24080.9951807398,-3.4654346E-04,-1.9636409E-07, 9.1804319E-10, 8.6055318, 5.7289501804, -1742.9305145148,-3.6814974E-04,-4.3749170E-07, 2.1183885E-09, -8.4530982, 7.5540213938, 16100.0685698171, 1.1921869E-04, 2.8238458E-07,-1.3407038E-09,
			8.0501724, 10.4831850066, 14286.1503796870,-6.0860358E-05, 6.2714140E-08,-1.9984990E-10, -7.6301553, 4.6679834628, 17285.6848046987, 3.0196162E-04, 5.0143862E-07,-2.4271179E-09, -7.4474952, -0.0862513635, 1256.6039104970,-5.3277630E-06, 1.2327842E-09,-1.0887946E-10, 7.3712011, 8.1276304344, 5957.4589549619,-2.1317311E-04,-1.8769697E-07, 9.8648918E-10,
			7.0629900, 0.9591375719, 33.7570471374,-3.0829302E-05,-3.6967043E-08, 1.7385419E-10, -6.3831491, 9.4966777258, 7004.5133996281, 2.1416722E-04, 3.2425793E-07,-1.5355019E-09, -5.7416071, 13.6527441326, 32409.6866054649,-1.9423071E-04, 5.4047029E-08,-2.6829589E-10, 4.3740095, 18.4814383957, 22128.5152003943,-2.8202511E-04,-1.2313366E-07, 6.2332010E-10,
			-3.9976134, 7.9669196340, 33524.3151647312, 1.7658291E-04, 4.9092233E-07,-2.3322447E-09, -3.2096876, 13.2398458924, 14985.4400105508,-2.5159493E-04,-1.5449073E-07, 7.2324505E-10, -2.9145404, 12.7093625336, 24499.7476701576, 8.3460748E-05, 3.1497443E-07,-1.5495082E-09, 2.7318890, 16.1258838235, 13799.8237756692,-4.3433786E-04,-3.7354477E-07, 1.8096592E-09,
			-2.5679459, -2.4418059357, -7072.0875142282,-1.5764051E-04,-2.4917833E-07, 1.0774596E-09, -2.5211990, 7.9551277074, 8470.6667759558,-2.2382863E-04,-1.8523141E-07, 7.6873027E-10, 2.4888871, 5.6426988169, -486.3266040178,-3.7347750E-04,-4.3625891E-07, 2.0095091E-09, 2.1460741, 7.1842488353, -1952.4799803455, 6.4518350E-05, 7.3230428E-08,-2.9472308E-10,
			1.9777270, 23.1494218585, 39414.2000050930, 1.9936508E-05, 3.7830496E-07,-1.8037978E-09, 1.9336825, 9.4222182890, 33314.7656989005, 6.0925100E-04, 1.0016445E-06,-4.7453563E-09, 1.8707647, 20.8369929680, 30457.2066251194,-1.2971236E-04, 1.2727746E-07,-5.6301898E-10, -1.7529659, 0.4873576771, -8886.0057043583,-3.3771956E-04,-4.6884877E-07, 2.2183135E-09,
			-1.4371624, 7.0979974718, -695.8760698485, 5.9190587E-05, 7.4463212E-08,-4.0360254E-10, -1.3725701, 1.4552986550, -209.5494658307, 4.3266809E-04, 5.1072212E-07,-2.4131116E-09, 1.2618162, 7.5108957121, 16728.3705250656, 1.1655481E-04, 2.8300097E-07,-1.3951435E-09}
local M11={1.6768000, -0.0431256817, 628.3019552485,-2.6638815E-06, 6.1639211E-10,-5.4439728E-11, 0.5164200, 11.2260974062, 6585.7609102104,-2.1583699E-04,-1.8708058E-07, 9.3204945E-10, 0.4138300, 13.5816519784, 14914.4523349355,-6.3524240E-05, 6.3330532E-08,-2.5428962E-10, 0.3711500, 5.5402729076, 7700.3894694766, 1.5497663E-04, 2.4979472E-07,-1.1318993E-09,
			0.2756000, 2.3124288905, 8956.9933799736, 1.4964887E-04, 2.5102751E-07,-1.2407788E-09, 0.2459863,-25.6198212459, -2.3011998397, 1.5231275E-04, 2.5041111E-07,-1.1863391E-09, 0.0711800, 7.9982533891, 7842.3648207073,-2.2116475E-04,-1.8584780E-07, 8.2317000E-10, 0.0612800, 10.3538079614, 16171.0562454324,-6.8852003E-05, 6.4563317E-08,-3.6316908E-10}
local M12={0.0048700, -0.0431256817, 628.3019552485,-2.6638815E-06, 6.1639211E-10,-5.4439728E-11, 0.0022800,-27.1705318325, -2.3011998397, 1.5231275E-04, 2.5041111E-07,-1.1863391E-09, 0.0015000, 11.2260974062, 6585.7609102104,-2.1583699E-04,-1.8708058E-07, 9.3204945E-10}
local M20={18461.2400600, 1.6279052448, 8433.4661576405,-6.4021295E-05,-4.9499477E-09, 2.0216731E-11, 1010.1671484, 3.9834598170, 16762.1575823656, 8.8291456E-05, 2.4546117E-07,-1.1661223E-09, 999.6936555, 0.7276493275, -104.7747329154, 2.1633405E-04, 2.5536106E-07,-1.2065558E-09, 623.6524746, 8.7690283983, 7109.2881325435,-2.1668263E-06, 6.8896872E-08,-3.2894608E-10,
			199.4837596, 9.6692843156, 15647.5290230993,-2.8252217E-04,-1.9141414E-07, 8.9782646E-10, 166.5741153, 6.4134738261, -1219.4032921817,-1.5447958E-04,-1.8151424E-07, 8.5739300E-10, 117.2606951, 12.0248388879, 23976.2204478244,-1.3020942E-04, 5.8996977E-08,-2.8851262E-10, 61.9119504, 6.3390143893, 25090.8490070907, 2.4060421E-04, 4.9587228E-07,-2.3524614E-09,
			33.3572027, 11.1245829706, 15437.9795572686, 1.5014592E-04, 3.1930799E-07,-1.5152852E-09, 31.7596709, 3.0832038997, 8223.9166918098, 3.6864680E-04, 5.0577218E-07,-2.3928949E-09, 29.5766003, 8.8121540801, 6480.9861772950, 4.9705523E-07, 6.8280480E-08,-2.7450635E-10, 15.5662654, 4.0579192538, -9548.0947169068,-3.0679233E-04,-4.3192536E-07, 2.0437321E-09,
			15.1215543, 14.3803934601, 32304.9118725496, 2.2103334E-05, 3.0940809E-07,-1.4748517E-09, -12.0941511, 8.7259027166, 7737.5900877920,-4.8307078E-06, 6.9513264E-08,-3.8338581E-10, 8.8681426, 9.7124099974, 15019.2270678508,-2.7985829E-04,-1.9203053E-07, 9.5226618E-10, 8.0450400, 0.6687636586, 8399.7091105030,-3.3191993E-05, 3.2017096E-08,-1.5363746E-10,
			7.9585542, 12.0679645696, 23347.9184925760,-1.2754553E-04, 5.8380585E-08,-2.3407289E-10, 7.4345550, 6.4565995078, -1847.7052474301,-1.5181570E-04,-1.8213063E-07, 9.1183272E-10, -6.7314363, -4.0265854988,-16133.8556271171,-9.0955337E-05,-2.4484477E-07, 1.1116826E-09, 6.5795750, 16.8104074692, 14323.3509980023,-2.2066770E-04,-1.1756732E-07, 5.4866364E-10,
			-6.4600721, 1.5847795630, 9061.7681128890,-6.6685176E-05,-4.3335556E-09,-3.4222998E-11, -6.2964773, 4.8837157343, 25300.3984729215,-1.9206388E-04,-1.4849843E-08, 6.0650192E-11, -5.6323538, -0.7707750092, 733.0766881638,-2.1899793E-04,-2.5474467E-07, 1.1521161E-09, -5.3683961, 6.8263720663, 16204.8433027325,-9.7115356E-05, 2.7023515E-08,-1.3414795E-10,
			-5.3112784, 3.9403341353, 17390.4595376141, 8.5627574E-05, 2.4607756E-07,-1.2205621E-09, -5.0759179, 0.6845236457, 523.5272223331, 2.1367016E-04, 2.5597745E-07,-1.2609955E-09, -4.8396143, -1.6710309265, -7805.1642023920, 6.1357413E-05, 5.5663398E-09,-7.4656459E-11, -4.8057401, 3.5705615768, -662.0890125485, 3.0927234E-05, 3.6923410E-08,-1.7458141E-10,
			3.9840545, 8.6945689615, 33419.5404318159, 3.9291696E-04, 7.4628340E-07,-3.5388005E-09, 3.6744619, 19.1659620415, 22652.0424227274,-6.8354947E-05, 1.3284380E-07,-6.3767543E-10, 2.9984815, 20.0662179587, 31190.2833132833,-3.4871029E-04,-1.2746721E-07, 5.8909710E-10, 2.7986413, -2.5281611620,-16971.7070481963, 3.4437664E-04, 2.6526096E-07,-1.2469893E-09,
			2.4138774, 17.7106633865, 22861.5918885581,-5.0102304E-04,-3.7787833E-07, 1.7754362E-09, 2.1863132, 5.5132179088, -9757.6441827375, 1.2587576E-04, 7.8796768E-08,-3.6937954E-10, 2.1461692, 13.4801375428, 23766.6709819937, 3.0245868E-04, 5.6971910E-07,-2.7016242E-09, 1.7659832, 11.1677086523, 14809.6776020201, 1.5280981E-04, 3.1869159E-07,-1.4608454E-09,
			-1.6244212, 7.3137297434, 7318.8375983742,-4.3483492E-04,-4.4182525E-07, 2.0841655E-09, 1.5813036, 5.4387584720, 16552.6081165349, 5.2095955E-04, 7.5618329E-07,-3.5792340E-09, 1.5197528, 16.7359480324, 40633.6032972747, 1.7441609E-04, 5.5981921E-07,-2.6611908E-09, 1.5156341, 1.7023646816,-17876.7861416319,-4.5910508E-04,-6.8233647E-07, 3.2300712E-09,
			1.5102092, 5.4977296450, 8399.6847301375,-3.3094061E-05, 3.1973462E-08,-1.5436468E-10, -1.3178223, 9.6261586339, 16275.8309783478,-2.8518605E-04,-1.9079775E-07, 8.4338673E-10, -1.2642739, 11.9817132061, 24604.5224030729,-1.3287330E-04, 5.9613369E-08,-3.4295235E-10, 1.1918723, 22.4217725310, 39518.9747380084,-1.9639754E-04, 1.2294390E-07,-5.9724197E-10,
			1.1346110, 14.4235191419, 31676.6099173011, 2.4767216E-05, 3.0879170E-07,-1.4204120E-09, 1.0857810, 8.8552797618, 5852.6842220465, 3.1609367E-06, 6.7664088E-08,-2.2006663E-10, -1.0193852, 7.2392703065, 33629.0898976466,-3.9751134E-05, 2.3556127E-07,-1.1256889E-09, -0.8227141, 11.0814572888, 16066.2815125171, 1.4748204E-04, 3.1992438E-07,-1.5697249E-09,
			0.8042238, 3.5274358950, -33.7870573000, 2.8263353E-05, 3.7539802E-08,-2.2902113E-10, 0.8025939, 6.7832463846, 16833.1452579809,-9.9779237E-05, 2.7639907E-08,-1.8858767E-10, -0.7931866, -6.3821400710,-24462.5470518423,-2.4326809E-04,-4.9525589E-07, 2.2980217E-09, -0.7910153, 6.3703481443, -591.1013369332,-1.5714346E-04,-1.8089785E-07, 8.0295327E-10,
			-0.6674056, 9.1819266386, 24533.5347274576, 5.5197395E-05, 2.7743463E-07,-1.3204870E-09, 0.6502226, 4.1010449356,-10176.3966721553,-3.0412845E-04,-4.3254175E-07, 2.0981718E-09, -0.6388131, 6.2958887075, 25719.1509623392, 2.3794032E-04, 4.9648867E-07,-2.4069012E-09}
local M21={0.0743000, 11.9537467337, 6480.9861772950, 4.9705523E-07, 6.8280480E-08,-2.7450635E-10, 0.0304300, 8.7259027166, 7737.5900877920,-4.8307078E-06, 6.9513264E-08,-3.8338581E-10, 0.0222900, 12.8540026510, 15019.2270678508,-2.7985829E-04,-1.9203053E-07, 9.5226618E-10, 0.0199900, 15.2095572232, 23347.9184925760,-1.2754553E-04, 5.8380585E-08,-2.3407289E-10,
			0.0186900, 9.5981921614, -1847.7052474301,-1.5181570E-04,-1.8213063E-07, 9.1183272E-10, 0.0169600, 7.1681781524, 16133.8556271171, 9.0955337E-05, 2.4484477E-07,-1.1116826E-09, 0.0162300, 1.5847795630, 9061.7681128890,-6.6685176E-05,-4.3335556E-09,-3.4222998E-11, 0.0141900, -0.7707750092, 733.0766881638,-2.1899793E-04,-2.5474467E-07, 1.1521161E-09}
local M30={385000.5290396, 1.5707963268, 0.0000000000, 0.0000000E+00, 0.0000000E+00, 0.0000000E+00,-20905.3551378, 3.9263508990, 8328.6914247251, 1.5231275E-04, 2.5041111E-07,-1.1863391E-09,-3699.1109330, 9.6121753977, 7214.0628654588,-2.1850087E-04,-1.8646419E-07, 8.7760973E-10,-2955.9675626, 11.9677299699, 15542.7542901840,-6.6188121E-05, 6.3946925E-08,-3.0872935E-10,
			-569.9251264, 6.2819054713, 16657.3828494503, 3.0462550E-04, 5.0082223E-07,-2.3726782E-09, 246.1584797, 7.2566208254, -1114.6285592663,-3.7081362E-04,-4.3687530E-07, 2.0639488E-09, -204.5861179, 12.0108556517, 14914.4523349355,-6.3524240E-05, 6.3330532E-08,-2.5428962E-10, -170.7330791, 14.3232845422, 23871.4457149091, 8.6124629E-05, 3.1435804E-07,-1.4950684E-09,
			-152.1378118, 9.6553010794, 6585.7609102104,-2.1583699E-04,-1.8708058E-07, 9.3204945E-10, -129.6202242, -0.8278839272, -7700.3894694766,-1.5497663E-04,-2.4979472E-07, 1.1318993E-09, 108.7427014, 6.7692631483, 7771.3771450920,-3.3094061E-05, 3.1973462E-08,-1.5436468E-10, 104.7552944, 3.8832252173, 8956.9933799736, 1.4964887E-04, 2.5102751E-07,-1.2407788E-09,
			79.6605685, 0.6705404095, -8538.2408905558, 2.8035534E-04, 2.6031101E-07,-1.2267725E-09, 48.8883284, 1.5276706450, 628.3019552485,-2.6638815E-06, 6.1639211E-10,-5.4439728E-11, -34.7825237, 20.0091090408, 22756.8171556428,-2.8468899E-04,-1.2251727E-07, 5.6888037E-10, 30.8238599, 11.9246042882, 16171.0562454324,-6.8852003E-05, 6.4563317E-08,-3.6316908E-10,
			24.2084985, 9.5690497159, 7842.3648207073,-2.2116475E-04,-1.8584780E-07, 8.2317000E-10, -23.2104305, 8.6374600436, 24986.0742741754, 4.5693825E-04, 7.5123334E-07,-3.5590172E-09, -21.6363439, 17.6535544685, 14428.1257309177,-4.3700174E-04,-3.7292838E-07, 1.7552195E-09, -16.6747239, 6.7261374666, 8399.6791003405,-3.5757942E-05, 3.2589854E-08,-2.0880440E-10,
			14.4026890, 4.9010662531, -9443.3199839914,-5.2312637E-04,-6.8728642E-07, 3.2502879E-09, -12.8314035, 14.3664102239, 23243.1437596606, 8.8788511E-05, 3.1374165E-07,-1.4406287E-09, -11.6499478, 22.3646636130, 31085.5085803679,-1.3237624E-04, 1.2789385E-07,-6.1745870E-10, -10.4447578, 16.6788391144, 32200.1371396342, 2.3843738E-04, 5.6476915E-07,-2.6814075E-09,
			10.3211071, 8.7119194804, -1324.1780250970, 6.1854469E-05, 7.3846820E-08,-3.4916281E-10, 10.0562033, 7.2997465071, -1742.9305145148,-3.6814974E-04,-4.3749170E-07, 2.1183885E-09, -9.8844667, 12.0539813334, 14286.1503796870,-6.0860358E-05, 6.2714140E-08,-1.9984990E-10, 8.7515625, 6.3563649081, -9652.8694498221,-9.0458282E-05,-1.7656429E-07, 8.3717626E-10,
			-8.3791067, 4.4137085761, -557.3142796331,-1.8540681E-04,-2.1843765E-07, 1.0319744E-09, -7.0026961, -3.1834384995,-16029.0808942018,-3.0728938E-04,-5.0020584E-07, 2.3182384E-09, 6.3220032, 9.1248177206, 16100.0685698171, 1.1921869E-04, 2.8238458E-07,-1.3407038E-09, 5.7508579, 6.2387797896, 17285.6848046987, 3.0196162E-04, 5.0143862E-07,-2.4271179E-09,
			-4.9501349, 9.6984267611, 5957.4589549619,-2.1317311E-04,-1.8769697E-07, 9.8648918E-10, -4.4211770, 3.0260949818, -209.5494658307, 4.3266809E-04, 5.1072212E-07,-2.4131116E-09, 4.1311145, 11.0674740526, 7004.5133996281, 2.1416722E-04, 3.2425793E-07,-1.5355019E-09, -3.9579827, 20.0522347225, 22128.5152003943,-2.8202511E-04,-1.2313366E-07, 6.2332010E-10,
			3.2582371, 14.8106422192, 14985.4400105508,-2.5159493E-04,-1.5449073E-07, 7.2324505E-10, -3.1483020, 4.8266068163, 16866.9323152810,-1.2804259E-04,-9.8998954E-09, 4.0433461E-11, 2.6164092, 14.2801588604, 24499.7476701576, 8.3460748E-05, 3.1497443E-07,-1.5495082E-09, 2.3536310, 9.5259240342, 8470.6667759558,-2.2382863E-04,-1.8523141E-07, 7.6873027E-10,
			-2.1171283, -0.8710096090, -7072.0875142282,-1.5764051E-04,-2.4917833E-07, 1.0774596E-09, -1.8970368, 17.6966801503, 13799.8237756692,-4.3433786E-04,-3.7354477E-07, 1.8096592E-09, -1.7385258, 2.0581540038, -8886.0057043583,-3.3771956E-04,-4.6884877E-07, 2.2183135E-09, -1.5713944, 22.4077892948, 30457.2066251194,-1.2971236E-04, 1.2727746E-07,-5.6301898E-10,
			-1.4225541, 24.7202181853, 39414.2000050930, 1.9936508E-05, 3.7830496E-07,-1.8037978E-09, -1.4189284, 17.1661967915, 23314.1314352759,-9.9282182E-05, 9.5920387E-08,-4.6309403E-10, 1.1655364, 3.8400995356, 9585.2953352221, 1.4698499E-04, 2.5164390E-07,-1.2952185E-09, -1.1169371, 10.9930146158, 33314.7656989005, 6.0925100E-04, 1.0016445E-06,-4.7453563E-09,
			1.0656723, 1.4845449633, 1256.6039104970,-5.3277630E-06, 1.2327842E-09,-1.0887946E-10, 1.0586190, 11.9220903668, 8364.7398411275,-2.1850087E-04,-1.8646419E-07, 8.7760973E-10, -0.9333176, 9.0816920389, 16728.3705250656, 1.1655481E-04, 2.8300097E-07,-1.3951435E-09, 0.8624328, 12.4550876470, 6656.7485858257,-4.0390768E-04,-4.0490184E-07, 1.9095841E-09,
			0.8512404, 4.3705828944, 70.9876756153,-1.8807069E-04,-2.1782126E-07, 9.7753467E-10, -0.8488018, 16.7219647962, 31571.8351843857, 2.4110126E-04, 5.6415276E-07,-2.6269678E-09, -0.7956264, 3.5134526588, -9095.5551701890, 9.4948529E-05, 4.1873358E-08,-1.9479814E-10}
local M31={0.5139500, 12.0108556517, 14914.4523349355,-6.3524240E-05, 6.3330532E-08,-2.5428962E-10, 0.3824500, 9.6553010794, 6585.7609102104,-2.1583699E-04,-1.8708058E-07, 9.3204945E-10, 0.3265400, 3.9694765808, 7700.3894694766, 1.5497663E-04, 2.4979472E-07,-1.1318993E-09, 0.2639600, 0.7416325637, 8956.9933799736, 1.4964887E-04, 2.5102751E-07,-1.2407788E-09,
			0.1230200, -1.6139220085, 628.3019552485,-2.6638815E-06, 6.1639211E-10,-5.4439728E-11, 0.0775400, 8.7830116346, 16171.0562454324,-6.8852003E-05, 6.4563317E-08,-3.6316908E-10, 0.0606800, 6.4274570623, 7842.3648207073,-2.2116475E-04,-1.8584780E-07, 8.2317000E-10, 0.0497000, 12.0539813334, 14286.1503796870,-6.0860358E-05, 6.2714140E-08,-1.9984990E-10}
--月球平黄经系数
local M1n={3.81034392032, 8.39968473021E+03,-3.31919929753E-05,3.20170955005E-08,-1.53637455544E-10 }

--==================日位置计算===================
--调用Enn前先设置EnnT时间变量
local EnnT=0
--计算E10,E11,E20等,即:某一组周期项或泊松项算出,计算前先设置EnnT时间
local function Enn(F)
	local i
	local v=0
	for i=1,#F,3 do
		v=v+F[i]*math.cos(F[i+1]+EnnT*F[i+2])
		--print('Fsize='..#F, 'i='..i, 'v='..v, 'F[i]='..F[i], 'm='..math.cos(F[i+1]+EnnT*F[i+2]))
	end
	return v
end

--返回地球位置,日心Date黄道分点坐标
local function earCal(jd)
	EnnT=jd/365250
	--print('EnnT='..EnnT)
	local llr={}
	local t1=EnnT
	local t2=t1*t1
	local t3=t2*t1
	local t4=t3*t1
	local t5=t4*t1
	--print('t1='..t1, 't2='..t2, 't3='..t3, 't4='..t4, 't5='..t5)
	llr[1] =Enn(E10) +Enn(E11)*t1 +Enn(E12)*t2 +Enn(E13)*t3 +Enn(E14)*t4 +Enn(E15)*t5
	--print('sppp')
	llr[2] =Enn(E20) +Enn(E21)*t1
	--print('eppp')
	llr[3] =Enn(E30) +Enn(E31)*t1 +Enn(E32)*t2 +Enn(E33)*t3
	llr[1]=rad2mrad(llr[1])
	--print('llr[0]='..llr[1], 'llr[1]='..llr[2], 'llr[2]='..llr[3])
	return llr
end

--传回jd时刻太阳的地心视黄经及黄纬
local function sunCal2(jd)
	--计算太阳真位置
	local sun=earCal(jd)
	sun[1]=sun[1] + math.pi
	sun[2]=-sun[2]
	local d=nutation(jd)
	--补章动
	sun[1]=rad2mrad(sun[1]+d.Lon)
	--补周年黄经光行差
	addGxc(jd,sun)
	--返回太阳视位置
	return sun
end

--==================月位置计算===================
--调用Mnn前先设置MnnT时间变量
local MnnT=0
--计算M10,M11,M20等,计算前先设置MnnT时间
local function Mnn(F)
	local i
	local v=0
	local t1=MnnT
	local t2=t1*t1
	local t3=t2*t1
	local t4=t3*t1
	for i=1,#F,6 do
		v=v+F[i]*math.sin(F[i+1] +t1*F[i+2] +t2*F[i+3] +t3*F[i+4] +t4*F[i+5])
	end
	return v
end

--返回月球位置,返回地心Date黄道坐标
local function moonCal(jd)
	MnnT=jd/36525
	local t1=MnnT
	local t2=t1*t1
	local t3=t2*t1
	local t4=t3*t1
	local llr={}
	llr[1] =(Mnn(M10) +Mnn(M11)*t1 +Mnn(M12)*t2)/rad
	llr[2] =(Mnn(M20) +Mnn(M21)*t1)/rad
	llr[3] =(Mnn(M30) +Mnn(M31)*t1)*0.999999949827
	llr[1] =llr[1] +M1n[1] +M1n[2]*t1 +M1n[3]*t2 +M1n[4]*t3 +M1n[5]*t4
	--地心Date黄道原点坐标(不含岁差)
	llr[1] =rad2mrad(llr[1])
	--补岁差
	addPrece(jd,llr)
	return llr
end

--传回月球的地心视黄经及视黄纬
local function moonCal2(jd)
	local moon=moonCal(jd)
	local d=nutation(jd)
	--补章动
	moon[1]=rad2mrad(moon[1]+d.Lon)
	return moon
end

--传回月球的地心视赤经及视赤纬
local function moonCal3(jd)
	local moon=moonCal(jd)
	HCconv(moon,hcjj1(jd))
	--补赤经及赤纬章动
	nutationRaDec(jd,moon)
	--如果黄赤转换前补了黄经章动及交章动,就不能再补赤经赤纬章动
	return moon
end

--==================地心坐标中的日月位置计算===================
local function jiaoCai(lx,t,jiao)
	--lx=1时计算t时刻日月角距与jiao的差, lx=0计算t时刻太阳黄经与jiao的差
	--计算太阳真位置(先算出日心坐标中地球的位置)
	local sun=earCal(t)
	--转为地心坐标
	sun[1]=sun[1] + math.pi
	sun[2]=-sun[2]
	--补周年光行差
	addGxc(t,sun)
	--print('sun[1]='..sun[1], 'sun[2]='..sun[2])
	if lx==0 then
		--补黄经章动
		local d=nutation(t)
		sun[1]=sun[1] + d.Lon
		return rad2mrad(jiao-sun[1])
	else
		--日月角差与章动无关
		local moon=moonCal(t)
		return rad2mrad(jiao-(moon[1]-sun[1]))
	end
end

--==================已知位置反求时间===================
local function jiaoCal(t1,jiao,lx) 
	--t1是J2000起算儒略日数
	--已知角度(jiao)求时间(t)
	--lx=0是太阳黄经达某角度的时刻计算(用于节气计算)
	--lx=1是日月角距达某角度的时刻计算(用于定朔望等)
	--传入的t1是指定角度对应真时刻t的前一些天
	--对于节气计算,应满足t在t1到t1+360天之间,对于Y年第n个节气(n=0是春分),t1可取值Y*365.2422+n*15.2
	--对于朔望计算,应满足t在t1到t1+25天之间,在此范围之外,求右边的根
	local t2=t1
	local t=0
	local v
	if lx==0 then
		--在t1到t2范围内求解(范气360天范围),结果置于t
		t2=t2+360
	else
		t2=t2+25
	end
	--待搜索目标角
	jiao=jiao*math.pi/180
	--利用截弦法计算
	--v1,v2为t1,t2时对应的黄经
	local v1=jiaoCai(lx,t1,jiao)
	local v2=jiaoCai(lx,t2,jiao)
	if v1<v2 then
		--减2pi作用是将周期性角度转为连续角度
		v2=v2 - 2*math.pi
	end
	--k是截弦的斜率
	local k=1
	local k2
	local i
	--快速截弦求根,通常截弦三四次就已达所需精度
	for i=1,10 do
		--算出斜率
		k2=(v2-v1)/(t2-t1)
		if math.abs(k2)>1e-15 then
			--差商可能为零,应排除
			k=k2
		end
		--直线逼近法求根(直线方程的根)
		t=t1-v1/k
		v=jiaoCai(lx,t,jiao)
		--一次逼近后,v1就已接近0,如果很大,则应减1周
		if v>1 then
			v=v-2*math.pi
		end
		if math.abs(v)<1e-8 then
			--已达精度
			break
		end
		--下一次截弦
		t1=t2
		v1=v2
		t2=t
		v2=v
	end
	
	return t
end

--==================节气计算===================

--返回一年中各个节气的时间表，从春分开始，y是阳历的年分/北京时
local function jqFromChunFen(y)
	local i
	local jd=365.2422*(y-2000)
	local q
	local jq = {}
	for i=0,23 do
		--计算第i个节气(i=0是春分),结果转为北京时
		q=jiaoCal(jd+i*15.2,i*15,0)+J2000+8/24
		--将节气时转成世界时
		JDate:setFromJD(q,1)
		jq[i+1] = JDate:JQ()
	end
	return jq
end

--返回一年的二十四个节气,从立春开始，y是阳历的年分/北京时
local function jqFromLiChun(y)
	--上一年
	local jq1 = jqFromChunFen(y-1)
	-- 当年
	local jq2 = jqFromChunFen(y)
	local jq = {}
	for i=1,3 do
		jq[i] = jq1[i+21]
	end
	for i=1,21 do
		jq[i+3] = jq2[i]
	end
	
	return jq
end

--==================节气暂存，用于快速查询===================
--初始化当前年份前后三年内的节气数据
local function jq3Y_Build()
	--取日期：20230508
	local date_YYYYMMDD = os.date("%Y%m%d")
	--取年: 2023
	local date_y=os.date("%Y")
	--取月: 05
	local date_m=os.date("%m")
	--取日: 08
	local date_d=os.date("%d")
	
	local jq_lastYear = jqFromChunFen(date_y-1)
	local jq_thisYear = jqFromChunFen(date_y)
	local jq_nextYear = jqFromChunFen(date_y+1)
	local i
	for i=1,24 do
		jq3Y[i] = jq_lastYear[i]
		jqN3Y[i] = jqB[i]
	end
	for i=1,24 do
		jq3Y[24+i] = jq_thisYear[i]
		jqN3Y[24+i] = jqB[i]
	end
	for i=1,24 do
		jq3Y[48+i] = jq_nextYear[i]
		jqN3Y[48+i] = jqB[i]
	end
end

-- 以 jbB 为 base，创建jqIdx查询字典，用于快速查询某一给定的节气在jqB中的索引位置
local jqIdxDic={}
local function jqIdxBuild()
	local idx
	for idx=1,#jqB do
		jqIdxDic[jqB[idx]] = idx
	end
end

--根据指定的时间基准，获取此时间之后的jq信息，返回两个table：timeList, nameList
local function jqComming(t)
	local timeList = {}
	local nameList = {}
	
	t = t or os.time()
	local tBase = os.time()
	if type(t) == type(tBase) then
		tBase = t
	end
	
	tBase = os.time()
	local tBaseStruct = os.date('!*t',tBase)
	if tBase>43200 then
		--校准tBase到00:00:00
		tBase = os.time({year=tBaseStruct.year,month=tBaseStruct.month,day=tBaseStruct.day,hour=0})
	end
	
	local idx
	for idx=1,#jq3Y do
		if jq3Y[idx]>=tBase then
			table.insert(timeList,jq3Y[idx])
			table.insert(nameList,jqN3Y[idx])
		end
	end
	
	return timeList,nameList
end

--获取给定的节气名称在 jbB中的索引位置，这个主要用于查询某个关键字是否是一个节气名称
local function jqIdxByName(jqName)
	return jqIdxDic[jqName] or 0
end

--根据给定的一个时间戳，查询这天是否存在节气
local function jqInfoByTime(t)
	t = t or os.time()
	local thisDay = os.date("%Y%m%d",t)
	local idx = 1
	for idx=1,#jq3Y do
		if thisDay == os.date("%Y%m%d",jq3Y[idx]) then
			return jq3Y[idx],jqN3Y[idx]
		end
	end
	return 0,''
end

--这个函数将建立节气列表，用于节气信息的查询
local function jqListBuild()
	jq3Y_Build()
	jqIdxBuild()
end

local function test(printPrefix)
	if nil == printPrefix then
		printPrefix = ''
	end
	
	--调用引用模块的 test 方法
	
	--开始本模块的 test 方法
	print(printPrefix..'test in lunarJieQiModule start')
	
end

--=========================模块化封装=========================
local M={}
function M.init(...)
	--抛出功能函数
	M.jqListBuild = jqListBuild
	M.jqFromChunFen = jqFromChunFen
	M.jqComming = jqComming
	M.jqIdxByName = jqIdxByName
	M.jqInfoByTime = jqInfoByTime
	
	M.setDbg = setDbg
	M.test = test
end

M.init()

return M

以上的脚本中，我们实现了计算二十四节气的功能，并且整理出了一些函数方法，例如计算当前日期开始的节气序列，例如检索指定的节气信息等。这为下游的其它脚本提供了极大的便利。

lunarModule.lua

lunarModule.lua 脚本实现了农历日期的计算，lunarModule.lua文档的脚本如下：

--此处获取农历的代码来自博客
--https://blog.csdn.net/BlueMustard/article/details/120907984

local dbgFlg = false

--引入24节气计算模块
local ok, jq = pcall(require, 'lunarjieQiModule')

local function setDbg(flg,printPrefix)
	dbgFlg = flg
	if nil == printPrefix then
		printPrefix = ''
	end
	
	--设置引用子模块的 dbgFlg
	jq.setDbg(flg,' '..printPrefix)
	
	if flg then
		print(printPrefix..'flg in lunarJieQiModule is true')
	end
end

--天干名称
local tianGan = {"甲","乙","丙","丁","戊","己","庚","辛","壬","癸"}
--地支名称
local diZhi = {"子","丑","寅","卯","辰","巳","午", "未","申","酉","戌","亥"}
--属相名称
local shengXiao = {"鼠","牛","虎","兔","龙","蛇", "马","羊","猴","鸡","狗","猪"}
--农历日期名
local lunarDayShuXu = {"初一","初二","初三","初四","初五","初六","初七","初八","初九","初十",
						"十一","十二","十三","十四","十五","十六","十七","十八","十九","二十",
						"廿一","廿二","廿三","廿四","廿五","廿六","廿七","廿八","廿九","三十"}

--农历月份名
local lunarMonthShuXu = {"正","二","三","四","五","六", "七","八","九","十","冬","腊"}

local daysToMonth365= {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}
local daysToMonth366= {0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335}

--每个农历月所属的季节名称和季节符号表
local jiJieNames = {'春','春','春','夏','夏','夏','秋','秋','秋','冬','冬','冬'}
local jiJieLogos = {'','','','','','','','','','❄','❄','❄'}

--[[dateLunarInfo说明：
自1901年起，至2100年每年的农历信息，与万年历核对完成
每年第1个数字为闰月月份
每年第2、3个数字为当年春节所在的阳历月份和日期
每年第4个数字为当年中对应月分的大小进，左边起为1月，往后依次为2月，3月，4月，。。。]]
local BEGIN_YEAR = 1901
local NUMBER_YEAR = 199
local dateLunarInfo= {{0, 2, 19, 19168}, {0, 2, 8, 42352}, {5, 1, 29, 21096}, {0, 2, 16, 53856}, {0, 2, 4, 55632}, {4, 1, 25, 27304},
						{0, 2, 13, 22176}, {0, 2, 2, 39632}, {2, 1, 22, 19176}, {0, 2, 10, 19168}, {6, 1, 30, 42200}, {0, 2, 18, 42192},
						{0, 2, 6, 53840}, {5, 1, 26, 54568}, {0, 2, 14, 46400}, {0, 2, 3, 54944}, {2, 1, 23, 38608}, {0, 2, 11, 38320},
						{7, 2, 1, 18872}, {0, 2, 20, 18800}, {0, 2, 8, 42160}, {5, 1, 28, 45656}, {0, 2, 16, 27216}, {0, 2, 5, 27968},
						{4, 1, 24, 44456}, {0, 2, 13, 11104}, {0, 2, 2, 38256}, {2, 1, 23, 18808}, {0, 2, 10, 18800}, {6, 1, 30, 25776},
						{0, 2, 17, 54432}, {0, 2, 6, 59984}, {5, 1, 26, 27976}, {0, 2, 14, 23248}, {0, 2, 4, 11104}, {3, 1, 24, 37744},
						{0, 2, 11, 37600}, {7, 1, 31, 51560}, {0, 2, 19, 51536}, {0, 2, 8, 54432}, {6, 1, 27, 55888}, {0, 2, 15, 46416},
						{0, 2, 5, 22176}, {4, 1, 25, 43736}, {0, 2, 13, 9680}, {0, 2, 2, 37584}, {2, 1, 22, 51544}, {0, 2, 10, 43344},
						{7, 1, 29, 46248}, {0, 2, 17, 27808}, {0, 2, 6, 46416}, {5, 1, 27, 21928}, {0, 2, 14, 19872}, {0, 2, 3, 42416},
						{3, 1, 24, 21176}, {0, 2, 12, 21168}, {8, 1, 31, 43344}, {0, 2, 18, 59728}, {0, 2, 8, 27296}, {6, 1, 28, 44368},
						{0, 2, 15, 43856}, {0, 2, 5, 19296}, {4, 1, 25, 42352}, {0, 2, 13, 42352}, {0, 2, 2, 21088}, {3, 1, 21, 59696},
						{0, 2, 9, 55632}, {7, 1, 30, 23208}, {0, 2, 17, 22176}, {0, 2, 6, 38608}, {5, 1, 27, 19176}, {0, 2, 15, 19152},
						{0, 2, 3, 42192}, {4, 1, 23, 53864}, {0, 2, 11, 53840}, {8, 1, 31, 54568}, {0, 2, 18, 46400}, {0, 2, 7, 46752},
						{6, 1, 28, 38608}, {0, 2, 16, 38320}, {0, 2, 5, 18864}, {4, 1, 25, 42168}, {0, 2, 13, 42160}, {10, 2, 2, 45656},
						{0, 2, 20, 27216}, {0, 2, 9, 27968}, {6, 1, 29, 44448}, {0, 2, 17, 43872}, {0, 2, 6, 38256}, {5, 1, 27, 18808},
						{0, 2, 15, 18800}, {0, 2, 4, 25776}, {3, 1, 23, 27216}, {0, 2, 10, 59984}, {8, 1, 31, 27432}, {0, 2, 19, 23232},
						{0, 2, 7, 43872}, {5, 1, 28, 37736}, {0, 2, 16, 37600}, {0, 2, 5, 51552}, {4, 1, 24, 54440}, {0, 2, 12, 54432},
						{0, 2, 1, 55888}, {2, 1, 22, 23208}, {0, 2, 9, 22176}, {7, 1, 29, 43736}, {0, 2, 18, 9680}, {0, 2, 7, 37584},
						{5, 1, 26, 51544}, {0, 2, 14, 43344}, {0, 2, 3, 46240}, {4, 1, 23, 46416}, {0, 2, 10, 44368}, {9, 1, 31, 21928},
						{0, 2, 19, 19360}, {0, 2, 8, 42416}, {6, 1, 28, 21176}, {0, 2, 16, 21168}, {0, 2, 5, 43312}, {4, 1, 25, 29864},
						{0, 2, 12, 27296}, {0, 2, 1, 44368}, {2, 1, 22, 19880}, {0, 2, 10, 19296}, {6, 1, 29, 42352}, {0, 2, 17, 42208},
						{0, 2, 6, 53856}, {5, 1, 26, 59696}, {0, 2, 13, 54576}, {0, 2, 3, 23200}, {3, 1, 23, 27472}, {0, 2, 11, 38608},
						{11, 1, 31, 19176}, {0, 2, 19, 19152}, {0, 2, 8, 42192}, {6, 1, 28, 53848}, {0, 2, 15, 53840}, {0, 2, 4, 54560},
						{5, 1, 24, 55968}, {0, 2, 12, 46496}, {0, 2, 1, 22224}, {2, 1, 22, 19160}, {0, 2, 10, 18864}, {7, 1, 30, 42168},
						{0, 2, 17, 42160}, {0, 2, 6, 43600}, {5, 1, 26, 46376}, {0, 2, 14, 27936}, {0, 2, 2, 44448}, {3, 1, 23, 21936},
						{0, 2, 11, 37744}, {8, 2, 1, 18808}, {0, 2, 19, 18800}, {0, 2, 8, 25776}, {6, 1, 28, 27216}, {0, 2, 15, 59984},
						{0, 2, 4, 27424}, {4, 1, 24, 43872}, {0, 2, 12, 43744}, {0, 2, 2, 37600}, {3, 1, 21, 51568}, {0, 2, 9, 51552},
						{7, 1, 29, 54440}, {0, 2, 17, 54432}, {0, 2, 5, 55888}, {5, 1, 26, 23208}, {0, 2, 14, 22176}, {0, 2, 3, 42704},
						{4, 1, 23, 21224}, {0, 2, 11, 21200}, {8, 1, 31, 43352}, {0, 2, 19, 43344}, {0, 2, 7, 46240}, {6, 1, 27, 46416},
						{0, 2, 15, 44368}, {0, 2, 5, 21920}, {4, 1, 24, 42448}, {0, 2, 12, 42416}, {0, 2, 2, 21168}, {3, 1, 22, 43320},
						{0, 2, 9, 26928}, {7, 1, 29, 29336}, {0, 2, 17, 27296}, {0, 2, 6, 44368}, {5, 1, 26, 19880}, {0, 2, 14, 19296},
						{0, 2, 3, 42352}, {4, 1, 24, 21104}, {0, 2, 10, 53856}, {8, 1, 30, 59696}, {0, 2, 18, 54560}, {0, 2, 7, 55968},
						{6, 1, 27, 27472}, {0, 2, 15, 22224}, {0, 2, 5, 19168}, {4, 1, 25, 42216}, {0, 2, 12, 42192}, {0, 2, 1, 53584},
						{2, 1, 21, 55592}, {0, 2, 9, 54560}}

--将给定的十进制数转为二进制字符串
local function dec2Bin(num)
	local str = ""
	local tmp = num
	while (tmp > 0) do
		if (tmp % 2 == 1) then
			str = str.."1"
		else
			str = str.."0"
		end
		
		tmp = math.modf(tmp / 2)
	end
	str = string.reverse(str)
	return str
end

--将给定的两个十进制数转换为两个长度相等的二进制字符串
local function dec2BinWithSameLen(num1, num2)
	local str1 = dec2Bin(num1)
	local str2 = dec2Bin(num2)
	local len1 = string.len(str1)
	local len2 = string.len(str2)
	local len = 0
	local x = 0
	
	--长度较短的字符串前方补零
	if (len1 > len2) then
		x = len1 - len2
		for i = 1, x do
			str2 = "0"..str2
		end
		len = len1
	elseif (len2 > len1) then
		x = len2 - len1
		for i = 1, x do
			str1 = "0"..str1
		end
		len = len2
	end
	len = len1
	return str1, str2, len
end

--将给定的两个十进制数，进行按位与运算，返回算结果
local function bitAnd(num1, num2)
	local str1, str2, len = dec2BinWithSameLen(num1, num2)
	local rtmp = ""
	for i = 1, len do
		local st1 = tonumber(string.sub(str1, i, i))
		local st2 = tonumber(string.sub(str2, i, i))
		if(st1 == 0) then
			rtmp = rtmp.."0"
		else
			if (st2 ~= 0) then
				rtmp = rtmp.."1"
			else
				rtmp = rtmp.."0"
			end
		end
	end
	return tonumber(rtmp,2)
end

--判断所在年份是否为闰年
local function IsLeapYear(solarYear)
	if solarYear%4 ~= 0 then
		return 0
	end
	if solarYear%100 ~= 0 then
		return 1
	end
	if solarYear%400 == 0 then
		return 1
	end
	return 0
end

local function getYearInfo(lunarYear,index)
	if lunarYear < BEGIN_YEAR or lunarYear > BEGIN_YEAR + NUMBER_YEAR - 1 then
		return
	end
	return dateLunarInfo[lunarYear-1901+1][index]
end

--计算指定公历日期是这一年中的第几天
local function daysCntInSolar(solarYear,solarMonth,solarDay)
	local daysToMonth = daysToMonth365
	if solarYear % 4 == 0 then
		if solarYear % 100 ~= 0 then
			daysToMonth = daysToMonth366
		end
		if solarYear % 400 == 0 then
			daysToMonth = daysToMonth366
		end
	end
	return daysToMonth[solarMonth] + solarDay
end

--[[根据指定的阳历日期，返回一个农历日期的结构体，结构如下：
lunarDate.solarYear：对应的阳历日期年份
lunarDate.solarMonth：对应的阳历日期月份
lunarDate.solarDay：对应的阳历日期日期
lunarDate.solarDate_YYYYMMDD：对应的阳历日期 YYYYMMDD
lunarDate.year：对应农历年份
lunarDate.month：对应农历月份
lunarDate.day：对应农历的日期
lunarDate.leap：是否为农历的闰年
lunarDate.year_shengXiao：用生肖表示的农历年份
lunarDate.year_ganZhi：用干支表示的农历年份
lunarDate.month_shuXu：农历月份的名称
lunarDate.month_ganZhi：用干支表示的农历月份
lunarDate.day_shuXu：农历日期的名称
lunarDate.day_ganZhi：用干支表示的农历日期
lunarDate.lunarDate_YYYYMMDD：以 YYYYMMDD 格式表示的农历日期
lunarDate.lunarDate_1：癸卯年四月十一
lunarDate.lunarDate_2：兔年四月十一
lunarDate.lunarDate_3：癸卯年四月丁亥日
lunarDate.lunarDate_4：癸卯(兔)年四月十一
lunarDate.jiJieName: 日期所属的季节名称
lunarDate.jiJieLogo：日期所属的季节的符号
]]
--阳历转阴历
local function solar2Lunar(solarYear,solarMonth,solarDay)
	local lunarDate = {}
	lunarDate.solarYear = solarYear
	lunarDate.solarMonth = solarMonth
	lunarDate.solarDay = solarDay
	lunarDate.solarDate=''
	lunarDate.solarDate_YYYYMMDD = ''
	lunarDate.year=solarYear
	lunarDate.month=0
	lunarDate.day=0
	lunarDate.leap=false
	lunarDate.year_shengXiao=''
	lunarDate.year_ganZhi=''
	lunarDate.month_shuXu=''
	lunarDate.month_ganZhi=''
	lunarDate.day_shuXu=''
	lunarDate.day_ganZhi=''
	lunarDate.lunarDate_YYYYMMDD=''
	lunarDate.lunarDate_1=''
	lunarDate.lunarDate_2=''
	lunarDate.lunarDate_3=''
	lunarDate.lunarDate_4=''
	lunarDate.jiJieName = ''
	lunarDate.jiJieLogo = ''
	
	--确定当前日期相对于2000年1月7日的天数，此日期是一个甲子记日的起点
	local tBase = os.time({year=2000,month=1,day=7})
	local tThisDay = os.time({year=math.min(solarYear,2037),month=solarMonth,day=solarDay})
	lunarDate.daysToBase = math.floor((tThisDay-tBase)/86400)
	
	lunarDate.solarDate_YYYYMMDD = os.date("%Y%m%d",tThisDay)
	
	if lunarDate.solarYear <= BEGIN_YEAR or lunarDate.solarYear > BEGIN_YEAR + NUMBER_YEAR- 1 then
		return lunarDate
	end
	
	--春节的公历日期
	local solarMontSpring = getYearInfo(lunarDate.year,2)
	local solarDaySpring = getYearInfo(lunarDate.year,3)
	
	--计算这天是公历年的第几天
	local daysCntInSolarThisDate = daysCntInSolar(solarYear, solarMonth, solarDay)
	--计算春节是公历年的第几天
	local daysCntInSolarSprint = daysCntInSolar(solarYear, solarMontSpring, solarDaySpring)
	--计算这天是农历年的第几天
	local daysCntInLunarThisDate = daysCntInSolarThisDate - daysCntInSolarSprint + 1
	
	if daysCntInLunarThisDate <= 0 then
		--如果 daysCntInLunarThisDate 为负，说明指定的日期在农历中位于上一年的年度内
		lunarDate.year = lunarDate.year-1
		if lunarDate.year <= BEGIN_YEAR then
			return lunar_date
		end
		
		--重新确定农历春节所在的公历日期
		solarMontSpring = getYearInfo(lunarDate.year,2)
		solarDaySpring = getYearInfo(lunarDate.year,3)
		
		--重新计算上一年春节是第几天
		daysCntInSolarSprint = daysCntInSolar(solarYear-1, solarMontSpring, solarDaySpring)
		--计算上一年共几天
		local daysCntInSolarTotal = daysCntInSolar(solarYear-1, 12, 31)
		--上一年农历年的第几天
		daysCntInLunarThisDate = daysCntInSolarThisDate + daysCntInSolarTotal - daysCntInSolarSprint + 1
	end
	
	--开始计算月份
	local lunarMonth = 1
	local lunarDaysCntInMonth = 0
	--dec 32768 =bin 1000000000000000，一个掩码
	local bitMask = 32768
	--大小月份的flg数据
	local lunarMonth30Flg = getYearInfo(lunarDate.year,4)
	--从正月开始，每个月进行以下计算
	while lunarMonth <= 13 do
		--计算这个月总共有多少天
		if bitAnd(lunarMonth30Flg,bitMask) ~= 0 then
			lunarDaysCntInMonth = 30
		else
			lunarDaysCntInMonth = 29
		end
		
		--检查thisDate距离这个月初一的天数是否小于这个月的总天数
		if daysCntInLunarThisDate <= lunarDaysCntInMonth then
			lunarDate.month = lunarMonth
			lunarDate.day = daysCntInLunarThisDate
			break
		else
			--如果剩余天数还大于这个月的天数，则继续往下个月算
			daysCntInLunarThisDate = daysCntInLunarThisDate - lunarDaysCntInMonth
			lunarMonth = lunarMonth + 1
			--掩码除2，相当于bit位向右移动一位
			bitMask = bitMask/2
		end
	end
	
	--闰月所在的月份
	local leapMontInLunar = getYearInfo(lunarDate.year,1)
	--确定闰月信息
	if leapMontInLunar > 0 and leapMontInLunar < lunarDate.month then
		--如果存在闰月，且闰在前面判断的月份前面，则农历月份需要减 1 处理
		lunarDate.month = lunarDate.month - 1
		
		if leapMontInLunar == lunarDate.month then
			--如果恰好闰在这个月，则把闰月标记位置
			lunarDate.leap = true
		end
	end
	--合成农历的年月日格式：20240215
	local tmpMonthStr = '0'..lunarDate.month
	tmpMonthStr = string.sub(tmpMonthStr,(#tmpMonthStr<3 and 1 or 2),(#tmpMonthStr<3 and 2 or 3))
	local tmpDayStr = '0'..lunarDate.day
	tmpDayStr = string.sub(tmpDayStr,(#tmpDayStr<3 and 1 or 2),(#tmpDayStr<3 and 2 or 3))
	lunarDate.lunarDate_YYYYMMDD = lunarDate.year..tmpMonthStr..tmpDayStr
	
	lunarDate.jiJieName = jiJieNames[lunarDate.month]
	lunarDate.jiJieLogo = jiJieLogos[lunarDate.month]
	
	--确定年份的生肖
	lunarDate.year_shengXiao = shengXiao[(((lunarDate.year - 4) % 60) % 12) + 1]
	--确定年份的干支
	lunarDate.year_ganZhi = tianGan[(((lunarDate.year - 4) % 60) % 10)+1]..diZhi[(((lunarDate.year - 4) % 60) % 12) + 1]
	--确定月份的数序
	lunarDate.month_shuXu = (lunarDate.leap and '闰' or '')..lunarMonthShuXu[lunarDate.month]
	--确定月份的干支，暂不支持计算
	lunarDate.month_ganZhi = ''
	--确定日期的数序
	lunarDate.day_shuXu = lunarDayShuXu[lunarDate.day]
	--确定日期的干支
	lunarDate.day_ganZhi = tianGan[(((lunarDate.daysToBase) % 60) % 10)+1]..diZhi[(((lunarDate.daysToBase) % 60) % 12) + 1]
	
	--提供国标第一类计年表示格式
	lunarDate.lunarDate_1 = lunarDate.year_ganZhi..'年'..lunarDate.month_shuXu..'月'..lunarDate.day_shuXu
	--提供国标第二类计年表示格式
	lunarDate.lunarDate_2 = lunarDate.year_shengXiao..'年'..lunarDate.month_shuXu..'月'..lunarDate.day_shuXu
	--提供国标第三类计年表示格式
	lunarDate.lunarDate_3 = lunarDate.year_ganZhi..'年'..lunarDate.month_shuXu..'月'..lunarDate.day_ganZhi..'日'
	--提供非国标的第四类计年表示格式
	lunarDate.lunarDate_4 = lunarDate.year_ganZhi..'('..lunarDate.year_shengXiao..')年'..lunarDate.month_shuXu..'月'..lunarDate.day_shuXu
	
	return lunarDate
end

--通过传入的阳历时间，返回一个阴历数据结构
local function solar2LunarByTime(t)
	local solarDate = os.date('*t',t)
	return solar2Lunar(solarDate.year,solarDate.month,solarDate.day)
end

--抛出 农历节气 信息，今年自今天起未来的 农历节气 信息
local function jqListComming(t)
	t = t or os.time()
	local timeBase = os.time()
	if type(t) == type(timeBase) then
		timeBase = t
	end
	
	local lunarList = {}
	local jqList = {}
	local timeList = {}
	
	--获取 timeBase开始的农历信息
	local jqTimeList, jqNameList = jq.jqComming(timeBase)
	
	--整理未来的节气信息
	local idx
	local thisY,thisM,thisD,thisYL
	local thisLunarDate
	local jqName
	local jqTime
	
	for idx=1,#jqTimeList do
		jqName = jqNameList[idx]
		jqTime = jqTimeList[idx]
		
		if jqName ~= jqToday then
			thisY = tonumber(os.date('%Y',jqTime))
			thisM = tonumber(os.date('%m',jqTime))
			thisD = tonumber(os.date('%d',jqTime))
			thisLunarDate = solar2Lunar(thisY,thisM,thisD)
			
			table.insert(lunarList,thisLunarDate.lunarDate_4)
			table.insert(jqList,jqName)
			table.insert(timeList,jqTime)
		end
	end
	
	--输出 lunar 信息
	return lunarList,jqList,timeList
end

--[[根据指定的节气名，整理并输出这个节气的信息，节气的信息是个如下的结构体
jqInfo.jqName：节气的名称
jqInfo.jqTimeList：节气的时间序列
jqInfo.lunarList：节气的农历日期序列
]]
local function jqInfoByName(jqN)
	local jqInfo = {}
	jqInfo.jqName = jqN or ''
	jqInfo.jqTimeList = {}
	jqInfo.lunarList = {}
	
	if '' == jqInfo.jqName then
		return jqInfo
	end
	
	--以 0 为参数，获取所有的节气信息
	local jqTimeList, jqNameList = jq.jqComming(0)
	local idx = 0
	
	for idx=1,#jqNameList do
		if jqNameList[idx] == jqInfo.jqName then
			table.insert(jqInfo.jqTimeList, jqTimeList[idx])
			local thisLunarDate = solar2LunarByTime(jqTimeList[idx])
			table.insert(jqInfo.lunarList, thisLunarDate.lunarDate_4)
		end
	end
	
	return jqInfo
end

--=========================这是测试函数=======================
local function test(printPrefix)
	if nil == printPrefix then
		printPrefix = ''
	end
	--调用引用模块的 test 方法
	res.test(' '..printPrefix)
	
	--开始本模块的 test 方法
	print(printPrefix..'test in lunarModule start')
	
	
	local idx
	local lunarList,jqList,timeList = jqListComming()
	print(printPrefix..'idx\tlunar\t\t\t\tjqName\t\t\t\tdateYL')
	for idx=1,#lunarList do
		print(printPrefix..idx..'\t'..lunarList[idx]..'\t\t'..jqList[idx]..'\t\t'..os.date("%Y%m%d",timeList[idx]))
	end
end

--=========================模块化封装=========================
local M={}
function M.init(...)
	--抛出功能函数
	M.jqListBuild = jq.jqListBuild
	M.jqIdxByName = jq.jqIdxByName
	M.jqInfoByTime = jq.jqInfoByTime
	
	M.jqListComming = jqListComming
	M.solar2LunarByTime = solar2LunarByTime
	M.jqInfoByName = jqInfoByName
	M.setDbg = setDbg
	M.test = test
end

M.init()

return M

以上代码引用了上文中的 lunarjieQiModule.lua 脚本内的二十四节气相关模块。并整合了自身所提供了的农历日期信息，封装成了 lunarModule 模块，进一步为下游脚本提供了引用的便利。

事件信息

为了在输入事件关键字时检索显示出对应的事件信息，或者在合适的日期显示有关的事件，我们需要实现事件的记录和管理，并提供事件和日期之间映射的检索方法。为此，我们需要以下 eventsList.txt 和 eventsListModule.lua 两个文档。

eventsList.txt

eventsList.txt 文档是一个事件和时间信息的映射列表，这个文档提供了事件和时间映射关系的管理接口。eventsList.txt 文档内容截取如下：

# 常备节日信息，这里一般维护周期性的，相对比较稳定的事件/节日信息，例如每年 or 每月都会发生的事件
[lunar][Y][M01]-1	春节 过年	(中国)除夕
[lunar][Y]0101	春节 过年	(中国)春节
[solar][Y]0101	元旦	(中国)元旦休3天
[solar][Y]0110	警察	(中国)警察节

eventsList.txt 文档内容分三列，以tab制表符分隔，三列数据分述如下：

• 第一列是时间定义，关于时间的定义格式暂不成熟，暂不多表
• 第二列是事件关键字，可以有多个关键字，多关键字以空格分隔，滤镜将会响应命中的关键字
• 第三列是事件内容，即将要显示在候选项comment区的内容

eventsListModule.lua

eventsListModule.lua 脚本文档提供了将 eventsList.txt 中所列事件加载为lua 字典对象的方法，并提供一些检索的接口。eventsListModule.lua 脚本内容如下：

-- eventsListModule.lua
-- Copyright (C) 2023 yaoyuan.dou 
local M={}
local dbgFlg = false
--按照公历日期建立的事件索引表
local eventsDicBySolarDates={}
--按照关键字建立的事件索引表
local eventsDicListByKeyW={}

--[[事件是一个结构体，每一个事件的结构如下：
e.c1：文档第一列的内容
e.c2：文档第二列的内容，如果没有内容，此为空
e.c3：文档第三列的内容，如果没有内容，此为空
e.kWs：这是文档第二列的内容通过空格切分后的关键字列表
e.time：这是事件的时间值
e.solarDate：这是事件的日期：20230102
]]

--一个农历日期表，用于根据农历反查对应阳历时间，提高查询效率
local lunarDatesList = {}

--引入系统变更处理模块
local ok, sysInfoRes = pcall(require, 'sysInfo')

--引入农历计算模块
local ok, lunar = pcall(require, 'lunarModule')

--引入日期时间计算模块
local ok, dt = pcall(require,'dateTimeModule')

--设置 dbg 开关
local function setDbg(flg)
	flg = flg or dbgFlg
	
	dbgFlg = flg
	sysInfoRes.setDbg(flg)
	lunar.setDbg(flg)
	dt.setDbg(flg)
	
	print('eventsListModule dbgFlg is '..tostring(dbgFlg))
end

--将这附串拆散成 table
local function stringSplit(str,sp,sp1)
	sp=(type(sp)=="string") and sp or " "
	if 0==#sp then
		sp="([%z\1-\127\194-\244][\128-\191]*)"
	elseif 1==#sp then
		sp="[^"..(sp=="%" and "%%" or sp).."]*"
	else
		sp1=sp1 or "^"
		str=str:gsub(sp,sp1)
		sp="[^"..sp1.."]*"
	end
	
	local tab={}
	for v in str:gmatch(sp) do
		if ''~=v then
			table.insert(tab,v)
		end
	end
	return tab
end

--将一个日期字符串转换为时间值，'20230125' -> xxxxxx
local function dateStr2Time(dateStr)
	dateStr = dateStr or ''
	if #dateStr ~= 8 then
		dateStr = os.date("%Y%m%d")
	end
	
	local year = tonumber(string.sub(dateStr,1,4))
	local month = tonumber(string.sub(dateStr,5,6))
	local day = tonumber(string.sub(dateStr,7,8))
	
	return os.time({year=year,month=month,day=day})
end

--根据指定的天数偏移量，建立农历日期序列表，以借后期快速查询农历对应的阳历日期
local function lunarDatesListBuild(preDays,posDays)
	if nil == preDays then
		preDays = 100
	end
	if nil == posDays then
		posDays = 365
	end
	preDays = math.max(preDays,1)
	posDays = math.max(posDays,1)
	
	local idx = 0
	local todayTime = os.date("*t")
	local tmpLunar,tmpSolar,tmpTime
	
	--以昨天为base，计算前preDays日期内的日期序列
	for idx = 1, preDays do
		tmpTime = os.time({year=todayTime.year,month=todayTime.month,day=todayTime.day - idx})
		tmpSolar = os.date("%Y%m%d",tmpTime)
		tmpLunar = lunar.solar2LunarByTime(tmpTime)
		
		lunarDatesList[tmpLunar.lunarDate_YYYYMMDD..(tmpLunar.leap and '.1' or '.0')] = tmpSolar
	end
	--以今天为base，计算后posDays日期内的日期序列
	for idx = 0, posDays do
		tmpTime = os.time({year=todayTime.year,month=todayTime.month,day=todayTime.day + idx})
		tmpSolar = os.date("%Y%m%d",tmpTime)
		tmpLunar = lunar.solar2LunarByTime(tmpTime)
		
		lunarDatesList[tmpLunar.lunarDate_YYYYMMDD..(tmpLunar.leap and '.1' or '.0')] = tmpSolar
	end
end

--以指定时间为基准，计算并把该基准前 or 后指定周数的周序对应的时间值
local function timeOfWeekDayBaseOnTime0(t,wCnt,wCntType,wDay)
	t = t or os.time()
	local tBase = os.time()
	if type(t)==type(tBase) then
		tBase = t
	end
	wCnt = wCnt or 0
	if 0==wCnt then
		wCnt = 1
	end
	wCntType = wCntType or 'w'
	if 'w'~=wCntType and 'W'~=wCntType then
		wCntType = 'w'
	end
	wDay = wDay or 0
	if wDay < 0 or wDay > 6 then
		wDay = 0
	end
	
	local fakeSolarDateTime = tBase
	local fakeSolarDate_wDay = tonumber(os.date("%w",fakeSolarDateTime))
	if wCnt > 0 then
		--找描点之后第 wCnt 周的位置
		if fakeSolarDate_wDay <= wDay then
			fakeSolarDateTime=fakeSolarDateTime+(wDay-fakeSolarDate_wDay+7*(wCnt-1))*86400
			if 'W'==wCntType and 0~=fakeSolarDate_wDay then
				--如果要求整周且初一不为周日，则需要额外加7天
				fakeSolarDateTime = fakeSolarDateTime + 7*86400
			end
		else
			fakeSolarDateTime=fakeSolarDateTime+(wDay-fakeSolarDate_wDay+7*wCnt)*86400
		end
	else
		--找描点之前第 wCnt 周的位置
		if fakeSolarDate_wDay <= wDay then
			fakeSolarDateTime = fakeSolarDateTime + (wDay-fakeSolarDate_wDay+7*wCnt)*86400
		else
			fakeSolarDateTime = fakeSolarDateTime + (wDay-fakeSolarDate_wDay+7*(wCnt+1))*86400
			if 'W'==wCntType and 0~=fakeSolarDate_wDay then
				--如果要求整周且初一不为周日，则需要额外减7天
				fakeSolarDateTime = fakeSolarDateTime - 7*86400
			end
		end
	end
	
	return fakeSolarDateTime
end

--[[对传入的锚点信息进行解码：[solar][Y]0315
函数返回一个锚点结构体，说明如下：
anchor.desc：锚点的描述
anchor.lunarFlg：锚点是否 base农历
anchor.solarFlg：锚点是否 base公历
anchor.yearFlg：锚点是否以 年 为循环周期
anchor.monthFlg：锚点是否以 月 为循环周期
anchor.weekFlg：锚点是否以 周 为循环周期
anchor.dayFlg：锚点是否为指定日期事件
anchor.jqFlg：锚点是否 base节气
anchor.eventFlg：锚点是否 base事件
anchor.solarDatesList：锚点解析的事件日期序列
]]
local function anchorDecode(anchorStr)
	local anchor = {}
	anchor.desc = ''
	anchor.lunarFlg = false
	anchor.solarFlg = false
	anchor.yearFlg = false
	anchor.monthFlg = false
	anchor.weekFlg = false
	anchor.dayFlg = false
	anchor.jqFlg = false
	anchor.eventFlg = false
	anchor.solarDatesList = {}
	
	anchorStr = anchorStr or ''
	if '' == anchorStr then
		return anchor
	end
	anchor.desc = anchorStr
	
	--1.1解码公历指定日期的事件
	do
		local solarDate = string.match(anchor.desc,"%[solar%]%[D%](%d%d%d%d%d%d%d%d)")
		if nil ~= solarDate then
			table.insert(anchor.solarDatesList,solarDate)
			anchor.solarFlg = true
			anchor.dayFlg = true
			return anchor
		end
	end
	
	--2.1/2解码农历指定日期的事件
	do
		local lunarDate = string.match(anchor.desc,"%[lunar%]%[D%](%d%d%d%d%d%d%d%d)")
		if nil ~= lunarDate then
			local solarDateOfThisLunarDate
			if string.find(anchor.desc,lunarDate..'%.1') then
				--这是一个带有.1标记的农历日期
				solarDateOfThisLunarDate = lunarDatesList[lunarDate..'.1']
			else
				--这是一个没有.1标记的农历日期
				solarDateOfThisLunarDate = lunarDatesList[lunarDate..'.0']
			end
			if nil ~= solarDateOfThisLunarDate then
				table.insert(anchor.solarDatesList,solarDateOfThisLunarDate)
				anchor.lunarFlg = true
				anchor.dayFlg = true
			end
			return anchor
		end
	end
	
	--3.1/2/3解码周循环事件
	do
		local weekDay = string.match(anchor.desc,"%[solar%]%[[Ww]%]([0-9]+)$")
		if nil == weekDay then
			weekDay = string.match(anchor.desc,"%[lunar%]%[[Ww]%]([0-6]+)$")
		end
		if nil ~= weekDay then
			weekDay = tonumber(weekDay)
			if weekDay>6 then
				weekDay = nil
			end
		end
		if nil ~= weekDay then
			--获取今天的周序值，距离周日的天数
			local daysToSundayToday = tostring(os.date('%w'))
			local timeBase = os.date("*t")
			timeBase.day = timeBase.day + weekDay - daysToSundayToday
			
			local tmpTime
			local idx
			--前查5周的日期
			local preWs = 5
			--后查10周的日期
			local posWs = 10
			for idx = 1,preWs do
				tmpTime = os.date("*t",os.time(timeBase))
				tmpTime.day = tmpTime.day - 7*(preWs-idx+1)
				table.insert(anchor.solarDatesList,os.date("%Y%m%d",os.time(tmpTime)))
			end
			for idx = 0,posWs do
				tmpTime = os.date("*t",os.time(timeBase))
				tmpTime.day = tmpTime.day + 7*idx
				table.insert(anchor.solarDatesList,os.date("%Y%m%d",os.time(tmpTime)))
			end
			
			if 0<#anchor.solarDatesList then
				anchor.solarFlg = true
				anchor.weekFlg = true
			end
			return anchor
		end
	end
	
	--4.1/2解码公历月循环事件
	do
		local daysOffset = string.match(anchor.desc,"%[solar%]%[[Mm]%](-*[0-9]+)$")
		if nil ~= daysOffset then
			daysOffset = tonumber(daysOffset)
			if 0==daysOffset or daysOffset<-31 or daysOffset>31 then
				daysOffset = nil
			end
		end
		if nil ~= daysOffset then
			local timeBase = os.date("*t")
			timeBase = os.time({year=timeBase.year,month=timeBase.month,day=1})
			
			local fakeTime
			local anchorMonth
			local idx
			--前查12个月的日期
			local preMs = 12
			--后查12个月的日期
			local posMs = 10
			
			for idx = 1,preMs do
				fakeTime = os.date('*t',timeBase)
				fakeTime.month = fakeTime.month - (preMs-idx+1)
				local t = os.time(fakeTime)
				
				anchorMonth = tonumber(os.date("%m",t))
				
				t = t + (daysOffset-(daysOffset>0 and 1 or 0))*86400
				if daysOffset > 0 then
					if tonumber(os.date('%m',t)) == anchorMonth then
						table.insert(anchor.solarDatesList,os.date("%Y%m%d",t))
					end
				elseif daysOffset < 0 then
					if tonumber(os.date('%m',t)) == (anchorMonth==1 and 12 or anchorMonth-1) then
						table.insert(anchor.solarDatesList,os.date("%Y%m%d",t))
					end
				end
			end
			for idx = 0,posMs do
				fakeTime = os.date('*t',timeBase)
				fakeTime.month = fakeTime.month + idx
				local t = os.time(fakeTime)
				
				anchorMonth = tonumber(os.date("%m",t))
				
				t = t + (daysOffset-(daysOffset>0 and 1 or 0))*86400
				if daysOffset > 0 then
					if tonumber(os.date('%m',t)) == anchorMonth then
						table.insert(anchor.solarDatesList,os.date("%Y%m%d",t))
					end
				elseif daysOffset < 0 then
					if tonumber(os.date('%m',t)) == (anchorMonth==1 and 12 or anchorMonth-1) then
						table.insert(anchor.solarDatesList,os.date("%Y%m%d",t))
					end
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.solarFlg = true
				anchor.monthFlg = true
			end
			return anchor
		end
	end
	
	--5.1/2解码农历月循环事件
	do
		local daysOffset = string.match(anchor.desc,"%[lunar%]%[[Mm]%](-*[0-9]+)$")
		if nil ~= daysOffset then
			daysOffset = tonumber(daysOffset)
			if 0==daysOffset or daysOffset<-31 or daysOffset>31 then
				daysOffset = nil
			end
		end
		if nil ~= daysOffset then
			local lunarYear = tonumber(os.date("%Y"))
			local fakeLunarDatesList = {}
			
			--合成去年1-9月度的月度字符串
			for idx = 1,9 do
				table.insert(fakeLunarDatesList,(lunarYear-1)..'0'..idx..'01.0')
			end
			--合成去年10-12月度的月度字符串
			for idx = 10,12 do
				table.insert(fakeLunarDatesList,(lunarYear-1)..idx..'01.0')
			end
			--合成今年1-9月度的月度字符串
			for idx = 1,9 do
				table.insert(fakeLunarDatesList,lunarYear..'0'..idx..'01.0')
			end
			--合成今年10-12月度的月度字符串
			for idx = 10,12 do
				table.insert(fakeLunarDatesList,lunarYear..idx..'01.0')
			end
			--合成明年1-9月度的月度字符串
			for idx = 1,9 do
				table.insert(fakeLunarDatesList,(lunarYear+1)..'0'..idx..'01.0')
			end
			--合成明年10-12月度的月度字符串
			for idx = 10,12 do
				table.insert(fakeLunarDatesList,(lunarYear+1)..idx..'01.0')
			end
			
			local fakeSolarDate
			for idx=1,#fakeLunarDatesList do
				fakeSolarDate = lunarDatesList[fakeLunarDatesList[idx]]
				local t = dateStr2Time(fakeSolarDate)
				local anchorMonth = tonumber(string.sub(fakeLunarDatesList[idx],5,6))
				t = t + (daysOffset-(daysOffset>0 and 1 or 0))*86400
				
				local lunarCheck = lunar.solar2LunarByTime(t)
				
				if daysOffset>0 then
					if anchorMonth == lunarCheck.month and false==lunarCheck.leap then
						table.insert(anchor.solarDatesList,os.date("%Y%m%d",t))
					end
				elseif daysOffset<0 then
					if lunarCheck.month==(anchorMonth==1 and 12 or anchorMonth-1) then
						table.insert(anchor.solarDatesList,os.date("%Y%m%d",t))
					end
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.lunarFlg = true
				anchor.monthFlg = true
			end
			return anchor
		end
	end
	
	--6.1解码农历年循环事件
	do
		local lunarYearMonth = string.match(anchor.desc,"%[lunar%]%[[Yy]%](%d%d%d%d)")
		if nil ~= lunarYearMonth then
			local lm,ld = string.match(anchor.desc,"%[lunar%]%[Y%](%d%d)(%d%d)")
			local ly = tonumber(os.date("%Y"))
			--预查前2年，后2年以及本年的农历日期，不考虑闰月
			local fakeLunarDatesList = {(ly-2)..lm..ld..'.0',
										(ly-1)..lm..ld..'.0',
										(ly-0)..lm..ld..'.0',
										(ly+1)..lm..ld..'.0',
										(ly+2)..lm..ld..'.0'}
			local thisSolarDate
			for idx = 1,#fakeLunarDatesList do
				thisSolarDate = lunarDatesList[fakeLunarDatesList[idx]]
				if nil ~= thisSolarDate then
					table.insert(anchor.solarDatesList,thisSolarDate)
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.lunarFlg = true
				anchor.yearFlg = true
			end
			return anchor
		end
	end
	
	--7.1解码公历年循环事件
	do
		local solarYearMonth = string.match(anchor.desc,"%[solar%]%[[Yy]%](%d%d%d%d)")
		if nil ~= solarYearMonth then
			local m,d = string.match(anchor.desc,"%[solar%]%[Y%](%d%d)(%d%d)")
			local y = tonumber(os.date("%Y"))
			local fakeDateStr
			--定义去年的事件
			fakeDateStr = (y - 1)..m..d
			if fakeDateStr == os.date("%Y%m%d",dateStr2Time(fakeDateStr)) then
				table.insert(anchor.solarDatesList,fakeDateStr)
			end
			--定义今年的事件
			fakeDateStr = y..m..d
			if fakeDateStr == os.date("%Y%m%d",dateStr2Time(fakeDateStr)) then
				table.insert(anchor.solarDatesList,fakeDateStr)
			end
			--定义明年的事件
			fakeDateStr = (y + 1)..m..d
			if fakeDateStr == os.date("%Y%m%d",dateStr2Time(fakeDateStr)) then
				table.insert(anchor.solarDatesList,fakeDateStr)
			end
			
			if 0<#anchor.solarDatesList then
				anchor.solarFlg = true
				anchor.yearFlg = true
			end
			return anchor
		end
	end
	
	--8.1/2解码锚定在农历月份+指定周序上的事件
	--[lunar][Y][M05][1Ww]4
	do
		local anchorLunarMonth,anchorWCnt,anchorWType,anchorWDay = string.match(anchor.desc,"%[[Ll]unar%]%[[Yy]%]%[[Mm]([0-9]+)%]%[(-*[0-9]+)([Ww])%]([0-9]+)$")
		if nil~=anchorLunarMonth and nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			anchorLunarMonth = tonumber(anchorLunarMonth)
			if anchorLunarMonth<1 or anchorLunarMonth>12 then
				anchorLunarMonth = nil
			elseif anchorLunarMonth<10 then
				anchorLunarMonth = '0'..anchorLunarMonth
			else
				anchorLunarMonth = tostring(anchorLunarMonth)
			end
			anchorWCnt = tonumber(anchorWCnt)
			if 0==anchorWCnt then
				anchorWCnt = nil
			end
			anchorWDay = tonumber(anchorWDay)
			if anchorWDay<0 or anchorWDay>6 then
				anchorWDay = nil
			end
		end
		if nil~=anchorLunarMonth and nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			local fakeLunarYear = 0
			local fakeSolarDate = ''
			local fakeSolarDateTime = ''
			local fakeLunarDate = ''
			local idx = 0
			
			--处理去年，今年，明天三年内的事件
			for idx=1,3 do
				fakeLunarYear = tonumber(os.date('%Y'))+(idx-2)
				--找到农历对应月的初一，做为基准日期
				fakeLunarDate = fakeLunarYear..anchorLunarMonth..'01.0'
				fakeSolarDate = lunarDatesList[fakeLunarDate]
				if nil ~= fakeSolarDate then
					table.insert(anchor.solarDatesList,os.date('%Y%m%d',timeOfWeekDayBaseOnTime0(dateStr2Time(fakeSolarDate),anchorWCnt,anchorWType,anchorWDay)))
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.lunarFlg = true
				anchor.yearFlg = true
			end
			return anchor
		end
	end
	
	--9.1/2解码锚定在公历月份+指定周序上的事件
	--[solar][Y][M05][1Ww]4
	do
		local anchorSolarMonth,anchorWCnt,anchorWType,anchorWDay = string.match(anchor.desc,"%[[Ss]olar%]%[[Yy]%]%[[Mm]([0-9]+)%]%[(-*[0-9]+)([Ww])%]([0-9]+)$")
		if nil~=anchorSolarMonth and nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			anchorSolarMonth = tonumber(anchorSolarMonth)
			if anchorSolarMonth<1 or anchorSolarMonth>12 then
				anchorSolarMonth = nil
			elseif anchorSolarMonth<10 then
				anchorSolarMonth = '0'..anchorSolarMonth
			else
				anchorSolarMonth = tostring(anchorSolarMonth)
			end
			anchorWCnt = tonumber(anchorWCnt)
			if 0==anchorWCnt then
				anchorWCnt = nil
			end
			anchorWDay = tonumber(anchorWDay)
			if anchorWDay<0 or anchorWDay>6 then
				anchorWDay = nil
			end
		end
		if nil~=anchorSolarMonth and nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			local fakeSolarYear = 0
			local fakeSolarDate = ''
			local fakeSolarDateTime = ''
			local idx = 0
			
			--处理去年，今年，明天三年内的事件
			for idx=1,3 do
				fakeSolarYear = tonumber(os.date('%Y'))+(idx-2)
				--以每指定月的1号作为指定的基准日期
				fakeSolarDate = fakeSolarYear..anchorSolarMonth..'01'
				if nil ~= fakeSolarDate then
					table.insert(anchor.solarDatesList,os.date('%Y%m%d',timeOfWeekDayBaseOnTime0(dateStr2Time(fakeSolarDate),anchorWCnt,anchorWType,anchorWDay)))
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.solarFlg = true
				anchor.yearFlg = true
			end
			return anchor
		end
	end
	
	--10.1/2/3/4解码锚定在节气上的+指定周序上的事件
	--[lunar][Y][JQ清明][1w]4
	do
		local anchorJqName,anchorWCnt,anchorWType,anchorWDay = string.match(anchor.desc,"%[[Ll]unar%]%[[Yy]%]%[[Jj][Qq](.+)%]%[(-*[0-9]+)([Ww])%]([0-9]+)$")
		if nil~=anchorJqName and nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			if 0==lunar.jqIdxByName(anchorJqName) then
				anchorJqName = nil
			end
			anchorWCnt = tonumber(anchorWCnt)
			if 0==anchorWCnt then
				anchorWCnt = nil
			end
			anchorWDay = tonumber(anchorWDay)
			if anchorWDay<0 or anchorWDay>6 then
				anchorWDay = nil
			end
		end
		if nil~=anchorJqName and nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			local jqInfo = lunar.jqInfoByName(anchorJqName)
			if #jqInfo.jqTimeList>0 then
				local idx
				for idx =1,#jqInfo.jqTimeList do
					--以每一个节气的时间为指定的基准时间
					table.insert(anchor.solarDatesList,os.date('%Y%m%d',timeOfWeekDayBaseOnTime0(jqInfo.jqTimeList[idx],anchorWCnt,anchorWType,anchorWDay)))
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.lunarFlg = true
				anchor.yearFlg = true
				anchor.jqFlg = true
			end
			return anchor
		end
	end
	
	--11.1/2/3/4解码锚定在公历每月+指定周序上的事件
	--[solar][M][2w]2
	do
		local anchorWCnt,anchorWType,anchorWDay = string.match(anchor.desc,"%[[Ss]olar%]%[[Mm]%]%[(-*[0-9]+)([Ww])%]([0-9]+)$")
		if nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			anchorWCnt = tonumber(anchorWCnt)
			if 0==anchorWCnt then
				anchorWCnt = nil
			end
			anchorWDay = tonumber(anchorWDay)
			if anchorWDay<0 or anchorWDay>6 then
				anchorWDay = nil
			end
		end
		if nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			local solarDateBase = os.date('*t')
			solarDateBase = os.date('*t',os.time({year=solarDateBase.year,month=solarDateBase.month,day=1}))
			local idx = 0
			local fakeSolarDate
			for idx=1,24 do
				fakeSolarDate = os.date('*t',os.time(solarDateBase))
				fakeSolarDate.month = fakeSolarDate.month + (idx - 13)
				
				table.insert(anchor.solarDatesList,os.date('%Y%m%d',timeOfWeekDayBaseOnTime0(os.time(fakeSolarDate),anchorWCnt,anchorWType,anchorWDay)))
			end
			
			if 0<#anchor.solarDatesList then
				anchor.solarFlg = true
				anchor.monthFlg = true
			end
			return anchor
		end
	end
	
	--12.1/2/3/4解码锚定在农历每月+指定周序上的事件
	--[lunar][M][2w]2
	do
		local anchorWCnt,anchorWType,anchorWDay = string.match(anchor.desc,"%[[Ll]unar%]%[[Mm]%]%[(-*[0-9]+)([Ww])%]([0-9]+)$")
		if nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			anchorWCnt = tonumber(anchorWCnt)
			if 0==anchorWCnt then
				anchorWCnt = nil
			end
			anchorWDay = tonumber(anchorWDay)
			if anchorWDay<0 or anchorWDay>6 then
				anchorWDay = nil
			end
		end
		if nil~=anchorWCnt and nil~=anchorWType and nil~=anchorWDay then
			local lunarDateBase = lunar.solar2LunarByTime(os.time())
			local fakeLunarDate = ''
			local fakeSolarDate = ''
			local idx
			
			--处理前12个月以及后12个月的事件
			--第一步，处理去年的月份事件
			for idx=lunarDateBase.month,12 do
				if idx < 10 then
					fakeSolarDate = lunarDatesList[(lunarDateBase.year-1)..'0'..idx..'01.0']
				else
					fakeSolarDate = lunarDatesList[(lunarDateBase.year-1)..idx..'01.0']
				end
				if nil ~= fakeSolarDate then
					table.insert(anchor.solarDatesList,os.date('%Y%m%d',timeOfWeekDayBaseOnTime0(dateStr2Time(fakeSolarDate),anchorWCnt,anchorWType,anchorWDay)))
				end
			end
			--第二步，处理今年的月份事件
			for idx=1,12 do
				if idx < 10 then
					fakeSolarDate = lunarDatesList[lunarDateBase.year..'0'..idx..'01.0']
				else
					fakeSolarDate = lunarDatesList[lunarDateBase.year..idx..'01.0']
				end
				if nil ~= fakeSolarDate then
					table.insert(anchor.solarDatesList,os.date('%Y%m%d',timeOfWeekDayBaseOnTime0(dateStr2Time(fakeSolarDate),anchorWCnt,anchorWType,anchorWDay)))
				end
			end
			--第三步，处理明年的月份事件
			for idx=1,lunarDateBase.month do
				if idx < 10 then
					fakeSolarDate = lunarDatesList[(lunarDateBase.year+1)..'0'..idx..'01.0']
				else
					fakeSolarDate = lunarDatesList[(lunarDateBase.year+1)..idx..'01.0']
				end
				if nil ~= fakeSolarDate then
					table.insert(anchor.solarDatesList,os.date('%Y%m%d',timeOfWeekDayBaseOnTime0(dateStr2Time(fakeSolarDate),anchorWCnt,anchorWType,anchorWDay)))
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.lunarFlg = true
				anchor.monthFlg = true
			end
			return anchor
		end
	end
	--13.1解码锚定在农历指定月+指定天数上的事件
	--[lunar][Y][M05]4
	do
		local anchorMonth,anchorDayOffset = string.match(anchor.desc,"%[[Ll]unar%]%[[Yy]%]%[[Mm]([0-9]+)%](-*[0-9]+)$")
		if nil~=anchorMonth and nil~=anchorDayOffset then
			anchorMonth = tonumber(anchorMonth)
			if anchorMonth<1 or anchorMonth>12 then
				anchorMonth = nil
			end
			anchorDayOffset = tonumber(anchorDayOffset)
			if 0==anchorDayOffset then
				anchorDayOffset = nil
			end
		end
		if nil~=anchorMonth and nil~=anchorDayOffset then
			local lunarDateBase = lunar.solar2LunarByTime(os.time())
			local fakeSolarDate = ''
			
			--第一步，处理去年的事件
			if anchorMonth < 10 then
				fakeSolarDate = lunarDatesList[(lunarDateBase.year-1)..'0'..anchorMonth..'01.0']
			else
				fakeSolarDate = lunarDatesList[(lunarDateBase.year-1)..anchorMonth..'01.0']
			end
			if nil ~= fakeSolarDate then
				fakeSolarDate = os.date('*t',dateStr2Time(fakeSolarDate))
				fakeSolarDate.day = fakeSolarDate.day + anchorDayOffset - (anchorDayOffset>0 and 1 or 0)
				
				table.insert(anchor.solarDatesList,os.date('%Y%m%d',os.time(fakeSolarDate)))
			end
			
			--第二步，处理今年的事件
			if anchorMonth < 10 then
				fakeSolarDate = lunarDatesList[lunarDateBase.year..'0'..anchorMonth..'01.0']
			else
				fakeSolarDate = lunarDatesList[lunarDateBase.year..anchorMonth..'01.0']
			end
			if nil ~= fakeSolarDate then
				fakeSolarDate = os.date('*t',dateStr2Time(fakeSolarDate))
				fakeSolarDate.day = fakeSolarDate.day + anchorDayOffset - (anchorDayOffset>0 and 1 or 0)
				
				table.insert(anchor.solarDatesList,os.date('%Y%m%d',os.time(fakeSolarDate)))
			end
			--第三步，处理明年的事件
			if anchorMonth < 10 then
				fakeSolarDate = lunarDatesList[(lunarDateBase.year+1)..'0'..anchorMonth..'01.0']
			else
				fakeSolarDate = lunarDatesList[(lunarDateBase.year+1)..anchorMonth..'01.0']
			end
			if nil ~= fakeSolarDate then
				fakeSolarDate = os.date('*t',dateStr2Time(fakeSolarDate))
				fakeSolarDate.day = fakeSolarDate.day + anchorDayOffset - (anchorDayOffset>0 and 1 or 0)
				
				table.insert(anchor.solarDatesList,os.date('%Y%m%d',os.time(fakeSolarDate)))
			end
			
			if 0<#anchor.solarDatesList then
				anchor.lunarFlg = true
				anchor.yearFlg = true
			end
			return anchor
		end
	end
	
	--14.1解码锚定在公历指定月+指定天数上的事件
	--[solar][Y][M05]4
	do
		local anchorMonth,anchorDayOffset = string.match(anchor.desc,"%[[Ss]olar%]%[[Yy]%]%[[Mm]([0-9]+)%](-*[0-9]+)$")
		if nil~=anchorMonth and nil~=anchorDayOffset then
			anchorMonth = tonumber(anchorMonth)
			if anchorMonth<1 or anchorMonth>12 then
				anchorMonth = nil
			end
			anchorDayOffset = tonumber(anchorDayOffset)
			if 0==anchorDayOffset then
				anchorDayOffset = nil
			end
		end
		if nil~=anchorMonth and nil~=anchorDayOffset then
			local solarDateBase = os.date('*t')
			
			local fakeSolarDate
			--第一步，处理去年的事件
			fakeSolarDate = os.date('*t',os.time({year=solarDateBase.year,month=anchorMonth,day=1}))
			fakeSolarDate.year = fakeSolarDate.year - 1
			fakeSolarDate.day = fakeSolarDate.day + anchorDayOffset - (anchorDayOffset>0 and 1 or 0)
			table.insert(anchor.solarDatesList,os.date('%Y%m%d',os.time(fakeSolarDate)))
			
			
			--第二步，处理今年的事件
			fakeSolarDate = os.date('*t',os.time({year=solarDateBase.year,month=anchorMonth,day=1}))
			fakeSolarDate.day = fakeSolarDate.day + anchorDayOffset - (anchorDayOffset>0 and 1 or 0)
			table.insert(anchor.solarDatesList,os.date('%Y%m%d',os.time(fakeSolarDate)))
			
			--第三步，处理明年的事件
			fakeSolarDate = os.date('*t',os.time({year=solarDateBase.year,month=anchorMonth,day=1}))
			fakeSolarDate.year = fakeSolarDate.year + 1
			fakeSolarDate.day = fakeSolarDate.day + anchorDayOffset - (anchorDayOffset>0 and 1 or 0)
			table.insert(anchor.solarDatesList,os.date('%Y%m%d',os.time(fakeSolarDate)))
			
			if 0<#anchor.solarDatesList then
				anchor.solarFlg = true
				anchor.yearFlg = true
			end
			return anchor
		end
	end
	
	--15.1/2解码锚定在指定节气+指定天数上的事件
	--[lunar][Y][JQ春分]4
	do
		local anchorJqName,anchorDayOffset = string.match(anchor.desc,"%[[Ll]unar%]%[[Yy]%]%[[Jj][Qq](.+)%](-*[0-9]+)$")
		if nil~=anchorJqName and nil~=anchorDayOffset then
			if 0==lunar.jqIdxByName(anchorJqName) then
				anchorJqName = nil
			end
			anchorDayOffset = tonumber(anchorDayOffset)
			if 0==anchorDayOffset then
				anchorDayOffset = nil
			end
		end
		if nil~=anchorJqName and nil~=anchorDayOffset then
			local jqInfo = lunar.jqInfoByName(anchorJqName)
			if #jqInfo.jqTimeList>0 then
				local idx
				local t
				for idx =1,#jqInfo.jqTimeList do
					--以每一个节气的时间为指定的基准时间
					t = jqInfo.jqTimeList[idx]
					t = t + (anchorDayOffset - (anchorDayOffset>0 and 1 or 0))*86400
					table.insert(anchor.solarDatesList,os.date('%Y%m%d',t))
				end
			end
			
			if 0<#anchor.solarDatesList then
				anchor.lunarFlg = true
				anchor.yearFlg = true
				anchor.jqFlg = true
			end
			return anchor
		end
	end
	
	return anchor
end

--将文档处理成行数组
local function files_to_lines(...)
	if dbgFlg then
		print("--->files_to_lines called here")
	end
	local tab=setmetatable({},{__index=table})
	local index=1
	for i,filename in next,{...} do
		local fn = io.open(filename)
		if fn then
			for line in fn:lines() do
				if not line or #line > 0 then
					tab:insert(line)
				end
			end
			fn:close()
		end
	end
	
	if dbgFlg then
		print("--->files_to_lines completed here")
	end
	return tab
end

--根据加载的文档，创建事件字典，以公历日期为索引
local function eventsDicBySolarDatesBuild(...)
	if dbgFlg then
		print("-->eventsDicBySolarDatesBuild called here")
	end
	
	local lines=files_to_lines(...)
	
	for i,line in next ,lines do
		if dbgFlg then
			print('line is: ', line)
		end
		if not line:match("^%s*#") then  -- 第一字 # 为注释行
			local d,kW,c = string.match(line,"(.+)\t(%C*)\t(%C*)")
			if nil ~= d then
				local thisEvent = {}
				thisEvent.d = d
				thisEvent.kW = kW or ''
				thisEvent.c = c or thisEvent.kW
				
				if '' ~= thisEvent.kW then
					thisEvent.kWs = stringSplit(thisEvent.kW,' ')
				end
				if nil == thisEvent.kWs then
					thisEvent.kWs = {thisEvent.kW}
				end
				
				local anchorInfo = anchorDecode(thisEvent.d)
				local thisKw = ''
				for idx = 1,#anchorInfo.solarDatesList do
					local subEvent = {}
					subEvent.c1 = thisEvent.d
					subEvent.c2 = thisEvent.kW
					subEvent.c3 = thisEvent.c
					subEvent.kWs = thisEvent.kWs
					
					local thisSolarDate = anchorInfo.solarDatesList[idx]
					subEvent.time = dateStr2Time(thisSolarDate)
					subEvent.solarDate = thisSolarDate
					
					local tDiff = dt.timeDiff(subEvent.time)
					if tDiff.monthsDiff<-1 then
						--如果这个事件的时间点已经过去大于一个月了，则不做处理
						if dbgFlg then
							print('这个事件放弃：',subEvent.c1,thisSolarDate)
						end
					else
						--添加一个新的事件
						if nil == eventsDicBySolarDates[thisSolarDate] then
							eventsDicBySolarDates[thisSolarDate] = {subEvent}
						else
							table.insert(eventsDicBySolarDates[thisSolarDate],subEvent)
						end
						
						for subIdx = 1, #subEvent.kWs do
							thisKw = subEvent.kWs[subIdx] or ''
							if ''~=thisKw then
								if nil == eventsDicListByKeyW[thisKw] then
									--这是一个新的 kW
									eventsDicListByKeyW[thisKw] = {subEvent}
								else
									--这不是一个新的 kW
									table.insert(eventsDicListByKeyW[thisKw],subEvent)
								end
							end
						end
					end
				end
			end
		end
	end
	
	if dbgFlg then
		print("-->eventsDicBySolarDatesBuild completed here")
	end
end

--通过keyWord来获取对应的事件列表
local function getEventsByKw(kW)
	local eventsList = {}
	kW = kW or ''
	if '' == kW then
		return eventsList
	end
	
	if nil==eventsDicListByKeyW then
		eventsList = {}
	else
		eventsList = eventsDicListByKeyW[kW] or {}
	end
	
	--需要进行一个排序处理，以方便后端使用
	if #eventsList > 0 then
		--做一个排序，按time升序排列
		table.sort(eventsList,
		function(a,b)
			if a.time < b.time then
				return true
			end
			return false
		end)
	end
	
	return eventsList
end

--通过时间来获取对应的事件列表
local function getEventsByTime(t)
	local eventsList = {}
	if nil == t then
		t = os.time()
	end
	
	if nil==eventsDicBySolarDates then
		eventsList = {}
	else
		eventsList = eventsDicBySolarDates[os.date('%Y%m%d',t)]
	end
	
	return eventsList or {}
end

--===========================test========================
local function test(printPrefix)
	if nil == printPrefix then
		printPrefix = ' '
	end
	
	if dbgFlg then
		print('eventsListModule test starting...')
	end
	
	--sysInfoRes.test(printPrefix..' ')
	--lunar.test(printPrefix..' ')
	--dt.test(printPrefix..' ')
	
	for k,v in pairs(eventsDicBySolarDates) do
		if dbgFlg then
			print(printPrefix..k..'\t'..v)
		end
	end
end

function M.init(...)
	--准备日期序列，包括去年一整年，以及将来一整年的日期在内
	local daysCntThisYear = tonumber(os.date("%j"))
	lunarDatesListBuild(370+daysCntThisYear,740-daysCntThisYear)
	--创建节气表
	lunar.jqListBuild()
	
	--加载文档中的事件信息
	local files={...}
	--文件名不支持中文，其中 # 开始的行为注释行
	table.insert(files,"eventsList.txt")
	
	for i,v in next, files do
		files[i] = sysInfoRes.currentDir().."/".. v
	end
	eventsDicBySolarDatesBuild(table.unpack(files))
	
	--抛出功能函数
	M.getEventsByKw = getEventsByKw
	M.getEventsByTime = getEventsByTime
	
	M.setDbg = setDbg
	M.test = test
end

M.init()

return M

日期与时间

为了实现增强版的日期时间输入效果，我们需要整理出来日期与农历，事件，二十四节气之间的对应关系；同时为了实现时间的快捷输入，我们需要整理出不同格式的时间信息。为此，我们需要 dateTimeModule.lua 脚本文档以实现此功能。 dateTimeModule.lua 脚本内容如下：

--dateTimeModule.lua
--Copyright (C) 2023 yaoyuan.dou 
--该模块主要提供一些当前的时间和日期的相关信息
local M={}
local dbgFlg = false

--引入农历计算模块
local lunarEnable, lunar = pcall(require, 'lunarModule')

-- 导入log模块记录日志
local logEnable, log = pcall(require, "runLog")

--设置 dbg 开关
local function setDbg(flg)
	flg = flg or dbgFlg
	
	dbgFlg = flg
	if lunarEnable then
		lunar.setDbg(flg)
	end
	if logEnable then
		log.setDbg(flg)
	end
	
	print('dateTimeModule dbgFlg is '..tostring(dbgFlg))
end

local wNames_CN = {'星期日','星期一','星期二','星期三','星期四','星期五','星期六'}
local wNames_EN = {'Sunday','Monday','Tuesday','Wednesday','Thursday','Friday','Saturday'}
local wNames_Short = {'Sun.','Mon.','Tues.','Wed.','Thur.','Fri.','Sat.'}
local mName_EN = {'January','February','March','April','May','June','July','August','September','October','November','December'}
local mName_Short = {'Jan.','Feb.','Mar.','Apr.','May.','Jun.','Jul.','Aug.','Sep.','Oct.','Nov.','Dec.'}
local numSymbals = {'st','nd','rd','th'}
local timeLogos = {['0000']='',['0030']='',['0100']='',['0130']='',['0200']='',['0230']='',['0300']='',['0330']='',['0400']='',['0430']='',['0500']='',['0530']='',['0600']='',['0630']='',['0700']='',['0730']='',['0800']='',['0830']='',['0900']='',['0930']='',['1000']='',['1030']='',['1100']='',['1130']='',['1200']='',['1230']='',['1300']='',['1330']='',['1400']='',['1430']='',['1500']='',['1530']='',['1600']='',['1630']='',['1700']='',['1730']='',['1800']='',['1830']='',['1900']='',['1930']='',['2000']='',['2030']='',['2100']='',['2130']='',['2200']='',['2230']='',['2300']='',['2330']='',['2400']=''}
local diZhi = {"子","丑","寅","卯","辰","巳","午", "未","申","酉","戌","亥"}

local function numSymbal(num)
	if num > 4 then
		return numSymbals[4]
	else
		return numSymbals[num]
	end
end

--获取timeLogo 
local function timeLogo(t)
	t = t or os.time()
	local timeNow = os.time()
	if type(t) == type(timeNow) then
		timeNow = t
	end
	local hourValue = os.date("%H",timeNow)
	local minValue=tonumber(os.date("%M",timeNow))
	
	if 15 < minValue and minValue < 45 then
		return timeLogos[string.format("%02d30",hourValue)]
	elseif 15 > minValue then
		return timeLogos[string.format("%02d00",hourValue)]
	else
		return timeLogos[string.format("%02d00",hourValue+1)]
	end
end

--[[提供一个timeInfo的时间结构，定义如下
timeInfo.time: 以秒为单位的时间戳
timeInfo.shiChen：时辰
timeInfo.time1：22:47:12
timeInfo.time2：22:47
timeInfo.time3：22点47分16秒
timeInfo.timeLogo: 时间对应的钟表符号
]]
local function timeInfoByTime(t)
	t = t or os.time()
	local tBase=os.time()
	if type(t)==type(tBase) then
		tBase = t
	end
	
	local timeInfo = {}
	timeInfo.time = tBase
	timeInfo.shiChen = ''
	timeInfo.time1 = os.date("%H:%M:%S",tBase)
	timeInfo.time2 = os.date("%H:%M",tBase)
	timeInfo.time3 = os.date("%H点%M分%S秒",tBase)
	
	local h = tonumber(os.date('%H',tBase))
	h = math.floor((h + 1)/2)+1
	timeInfo.shiChen = (diZhi[h] or diZhi[1])..'时'

	timeInfo.timeLogo = timeLogo(tBase)
	
	return timeInfo
end

--[[根据指定的时间，返回结构化的 alltimeInfo 对象，结构如下
alltimeInfo.time: 时间值
alltimeInfo.YYYYMMDD_hhmmss: 2022-05-09 22:47:12
alltimeInfo.YYYYMMDD_hhmm: 2022-05-09 22:47
alltimeInfo.YYYYMMDD_W_hhmmss: 2022年5月9日 星期一 22点47分16秒
alltimeInfo.W_M_Date_hhmmss_YYYY: Mon. May. 09th, 22:47:01, 2022
alltimeInfo.timeLogo: 时间对应的时钟符号
]]
local function alltimeInfo(t)
	t = t or os.time()
	local tBase = os.time()
	if type(t) == type(tBase) then
		tBase = t
	end
	
	local alltimeInfo = {}
	alltimeInfo.time = tBase
	
	--处理星期信息, os.date("%w"): 距离周日的天数
	local wN=tonumber(os.date("%w",tBase)) + 1
	local wInfo={wNames_CN[wN],wNames_EN[wN],wNames_Short[wN]}
	
	--处理月份信息
	local mN=tonumber(os.date("%m",tBase))
	local mInfo={mName_EN[mN],mName_Short[mN]}
	
	--处理日期信息
	local dN=tonumber(os.date("%d",tBase))
	local dInfo={os.date("%d")..numSymbal(dN)}
	
	--处理时分信息
	local timeInfo = timeInfoByTime(tBase)
	
	--合成alltime信息
	--2022-05-09 22:47:12
	alltimeInfo.YYYYMMDD_hhmmss=os.date("%Y-%m-%d")..' '..timeInfo.time1
	--2022-05-09 22:47
	alltimeInfo.YYYYMMDD_hhmm=os.date("%Y-%m-%d")..' '..timeInfo.time2
	--2022年5月9日 星期一 22点47分16秒
	alltimeInfo.YYYYMMDD_W_hhmmss = os.date("%Y年")..tonumber(os.date("%m"))..'月'..tonumber(os.date('%d'))..'日 '..wInfo[1]..' '..timeInfo.time3
	--Mon. May. 09th, 22:47:01, 2022
	alltimeInfo.W_M_Date_hhmmss_YYYY = wInfo[3]..' '..mInfo[2]..' '..dInfo[1]..' '..timeInfo.time1..', '..os.date("%Y")
	
	alltimeInfo.timeLogo = timeInfo.timeLogo
	
	--返回alltime信息
	return alltimeInfo
end

--提供 alltList 信息
local function allt()
	--处理星期信息, os.date("%w"): 距离周日的天数
	local wN=tonumber(os.date("%w")) + 1
	local wInfo={wNames_CN[wN],wNames_EN[wN],wNames_Short[wN]}
	
	--处理月份信息
	local mN=tonumber(os.date("%m"))
	local mInfo={mName_EN[mN],mName_Short[mN]}
	
	--处理日期信息
	local dN=tonumber(os.date("%d"))
	local dInfo={os.date("%d")..numSymbal(dN)}
	
	--处理时分信息
	local timeInfo = timeInfoByTime()
	
	--合成alltime信息
	--2022-05-09 22:47:12
	local allt_1 = os.date("%Y-%m-%d")..' '..timeInfo.time1
	--2022-05-09 22:47
	local allt_2 = os.date("%Y-%m-%d")..' '..timeInfo.time2
	--2022年5月9日 星期一 22点47分16秒
	local allt_3 = os.date("%Y年")..tonumber(os.date("%m"))..'月'..tonumber(os.date('%d'))..'日 '..wInfo[1]..' '..timeInfo.time3
	--Mon. May. 09th, 22:47:01, 2022
	local allt_4 = wInfo[3]..' '..mInfo[2]..' '..dInfo[1]..' '..timeInfo.time1..', '..os.date("%Y")
	
	--返回alltime信息
	return {allt_1,allt_2,allt_3,allt_4}
end

--[[根据时间返回日期信息，一个日期信息结构如下
dateInfo.time：日期的时间值
dateInfo.YYYY：日期的年份值
dateInfo.MM：日期的年份值
dateInfo.DD：日期的年份值
dateInfo.date_YYYYMMDD_1：2022/05/09
dateInfo.date_MMDD_1：05/09
dateInfo.date_YYYYMMDD_2：2022-05-09
dateInfo.date_MMDD_2：05-09
dateInfo.date_YYYY_MM_DD_1：2022年05月09日
dateInfo.date_YYYY_M_D_1：2022年5月9日
dateInfo.date_M_D_1：5月9日
dateInfo.date_M_Dth_YYYY：Mar. 09th, 2022
dateInfo.date_M_Dth_YYYY_2：May 09th, 2022
dateInfo.date10：二〇二二年五月九日
dateInfo.date_yyMxx：23M04
dateInfo.date_YYYYMMDD：20230412
dateInfo.lunarInfo: 一个lunar的结构体
]]
local function dateInfoByTime(t)
	t = t or os.time()
	local baseTime = os.time()
	if type(t) == type(baseTime) then
		baseTime = t
	end
	
	--处理年份信息
	local yN=tonumber(os.date("%Y",baseTime))
	local yN_1=''
	yN_1=os.date("%Y",baseTime):gsub("%d",{["1"]="一",["2"]="二",["3"]="三",["4"]="四",["5"]="五",["6"]="六",["7"]="七",["8"]="八",["9"]="九",["0"]="〇",})
	local yInfo={yN_1.."年"}
	
	--处理月份信息
	local mN=tonumber(os.date("%m",baseTime))
	local mN_1=''
	mN_1=os.date("%m",baseTime):gsub("%d",{["1"]="一",["2"]="二",["3"]="三",["4"]="四",["5"]="五",["6"]="六",["7"]="七",["8"]="八",["9"]="九",["0"]="",})
	if mN == 10 then
		mN_1 = '十'
	elseif mN == 11 then
		mN_1 = '十一'
	elseif mN == 12 then
		mN_1 = '十二'
	end
	local mInfo={mName_EN[mN],mName_Short[mN],mN_1..'月'}
	
	--处理日期信息
	local dN=tonumber(os.date("%d",baseTime))
	local dN_1=''
	dN_1=os.date("%d",baseTime):gsub("%d",{["1"]="一",["2"]="二",["3"]="三",["4"]="四",["5"]="五",["6"]="六",["7"]="七",["8"]="八",["9"]="九",["0"]="",})
	if dN > 19 then
		dN_1 = string.sub(dN_1,1,3).."十"..string.sub(dN_1,4,#dN_1)
	elseif dN > 9 then
		dN_1="十"..string.sub(dN_1,4,#dN_1)
	end
	dN_1 = dN_1..'日'
	local dInfo={os.date("%d",baseTime)..numSymbal(dN),dN_1}
	
	local dateInfo = {}
	dateInfo.time = baseTime
	dateInfo.YYYY = os.date("%Y",baseTime)
	dateInfo.MM = os.date("%m",baseTime)
	dateInfo.DD = os.date("%d",baseTime)
	
	--合成 dateInfo 信息
	--2022/05/09
	dateInfo.date_YYYYMMDD_1 = os.date("%Y/%m/%d",baseTime)
	--05/09
	dateInfo.date_MMDD_1 = os.date("%m/%d",baseTime)
	--2022-05-09
	dateInfo.date_YYYYMMDD_2 = os.date("%Y-%m-%d",baseTime)
	--05-09
	dateInfo.date_MMDD_2 = os.date("%m-%d",baseTime)
	--2022年05月09日
	dateInfo.date_YYYY_MM_DD_1 = os.date("%Y年%m月%d日",baseTime)
	--2022年5月9日
	dateInfo.date_YYYY_M_D_1 = os.date("%Y年",baseTime)..tonumber(os.date("%m",baseTime)).."月"..tonumber(os.date("%d",baseTime)).."日"
	--5月9日
	dateInfo.date_M_D_1 = tonumber(os.date("%m",baseTime)).."月"..tonumber(os.date("%d",baseTime)).."日"
	--May. 09th, 2022
	dateInfo.date_M_Dth_YYYY_1 = mInfo[2]..' '..dInfo[1]..', '..os.date("%Y",baseTime)
	--May 09th, 2022
	dateInfo.date_M_Dth_YYYY_2 = mInfo[1]..' '..dInfo[1]..', '..os.date("%Y",baseTime)
	--二〇二二年五月九日
	dateInfo.date10 = yInfo[1]..mInfo[3]..dInfo[2]
	--23M04
	dateInfo.date_yyMxx = os.date("%yM%m",baseTime)
	--20230412
	dateInfo.date_YYYYMMDD = os.date("%Y%m%d",baseTime)
	
	dateInfo.lunarInfo = lunar.solar2LunarByTime(baseTime)
	
	--输出 dateInfo 信息
	return dateInfo
end

--提供 date信息
local function dateInfoByDaysOffset(daysOffset)
	--baseDate准备
	daysOffset = daysOffset or 0
	local thisOffset = 0
	if type(thisOffset) == type(daysOffset) then
		thisOffset = daysOffset
	end
	
	local baseTime = os.date("*t")
	baseTime.day = baseTime.day + thisOffset
	
	local info = dateInfoByTime(os.time(baseTime))
	
	--输出 dateInfo 信息
	return info
end

--提供指定时间的 wInfo 信息
--[[week结构如下
wInfo.time：时间戳
wInfo.nameCN：周名称，中文
wInfo.nameEN：周名称，英文
wInfo.nameShort：周名称，简写
wInfo.xxWxx：周序，23W29
wInfo.offset2Sun：距离周日的天数
wInfo.offset2Year：年内周数，同步于xxWxx
]]
local function wInfoByTime(t)
	t = t or os.time()
	local timeBase = os.time()
	if type(t) == type(timeBase) then
		timeBase = t
	end
	
	--处理星期信息, os.date("%w"): 距离周日的天数
	local wN=tonumber(os.date("%w",timeBase))
	--计算今年以来的周数
	local weekNo=os.date("%W",timeBase) + 1
	
	local wInfo = {}
	wInfo.time = timeBase
	wInfo.nameCN = wNames_CN[wN+1]
	wInfo.nameEN = wNames_EN[wN+1]
	wInfo.nameShort = wNames_Short[wN+1]
	wInfo.offset2Sun = wN
	wInfo.offset2Year = weekNo
	wInfo.xxWxx = os.date("%y",timeBase).."W"..wInfo.offset2Year
	
	return wInfo
end

--提供指定时间的 week 信息
local function week(t)
	local thisInfo = wInfoByTime(t)
	return {thisInfo.nameCN,thisInfo.nameEN,thisInfo.nameShort,thisInfo.xxWxx}
end

--[[计算两个时间之间的差别，以 t1 为参考点，返回结构体如下：
diff.tRef：这是计算的基准时间
diff.tTgt：这是计算的目标时间
diff.timeDiff：这是时间戳差，单位是s
diff.daysDiff：这是天数差，单位是天
diff.monthsDiff：这是月数差，单位是月
diff.yearsDiff：这是年数差，单位是年
diff.weeksDiff：这是周数差，单位是周
]]
local function timeDiff(t1,t2)
	local diff = {}
	if nil == t1 then
		t1 = os.time()
	end
	if nil == t2 then
		--如果只有一个参数，则计算所给的 t1与当前时间的差值
		t2 = t1
		t1 = os.time()
	end
	
	diff.tRef = t1
	diff.tTgt = t2
	diff.timeDiff = 0
	diff.daysDiff = 0
	diff.monthsDiff = 0
	diff.yearsDiff = 0
	diff.weeksDiff = 0
	
	local t11 = os.date("*t", t1)
	local t22 = os.date("*t", t2)
	
	--计算时间差
	diff.timeDiff = t2 - t1
	
	--计算天数差
	local t11_noTime = os.time({year=t11.year, month=t11.month, day=t11.day})
	local t22_noTime = os.time({year=t22.year, month=t22.month, day=t22.day})
	diff.daysDiff = math.floor((t22_noTime - t11_noTime) / (3600 * 24))
	
	--计算年数差
	diff.yearsDiff = t22.year - t11.year
	
	--计算月数差
	diff.monthsDiff = diff.yearsDiff * 12 + t22.month - t11.month
	
	--计算周数差
	local t1_wn = tonumber(os.date("%w",t1))
	local t2_wn = tonumber(os.date("%w",t2))
	local daysDiffToWeekStart = diff.daysDiff + t1_wn - t2_wn
	diff.weeksDiff = math.floor(daysDiffToWeekStart/7)
	
	return diff
end

--计算时间偏差的语义，以 t1 为base，计算 t2 的偏离量
local function daysDiffName(t1,t2)
	local tDiff = timeDiff(t1,t2)
	local comment = ''
	
	if tDiff.daysDiff == -3 then
		comment = '大前天'
	elseif tDiff.daysDiff == -2 then
		comment = '前天'
	elseif tDiff.daysDiff == 0 then
		comment = '今天'
	elseif tDiff.daysDiff == -1 then
		comment = '昨天'
	elseif tDiff.daysDiff == 1 then
		comment = '明天'
	elseif tDiff.daysDiff == 2 then
		comment = '后天'
	elseif tDiff.daysDiff == 3 then
		comment = '大后天'
	elseif tDiff.weeksDiff == -2 then
		comment = '上上周'
	elseif tDiff.weeksDiff == -1 then
		comment = '上周'
	elseif tDiff.weeksDiff == 1 then
		comment = '下周'
	elseif tDiff.weeksDiff == 2 then
		comment = '下下周'
	elseif tDiff.monthsDiff == -2 then
		comment = '上上月'
	elseif tDiff.monthsDiff == -1 then
		comment = '上月'
	elseif tDiff.monthsDiff == 1 then
		comment = '下月'
	elseif tDiff.monthsDiff == 2 then
		comment = '下下月'
	elseif tDiff.yearsDiff == -3 then
		comment = '大前年'
	elseif tDiff.yearsDiff == -2 then
		comment = '前年'
	elseif tDiff.yearsDiff == -1 then
		comment = '去年'
	elseif tDiff.yearsDiff == 1 then
		comment = '明年'
	elseif tDiff.yearsDiff == 2 then
		comment = '后年'
	elseif tDiff.yearsDiff == 3 then
		comment = '大后年'
	elseif tDiff.yearsDiff ~= 0 then
		comment = math.abs(tDiff.yearsDiff)..'年'..((tDiff.yearsDiff<0) and '前' or '后')
	elseif tDiff.monthsDiff ~= 0 then
		comment = math.abs(tDiff.monthsDiff)..'个月'..((tDiff.monthsDiff<0) and '前' or '后')
	elseif tDiff.weeksDiff ~= 0 then
		comment = math.abs(tDiff.weeksDiff)..'周'..((tDiff.weeksDiff<0) and '前' or '后')
	elseif tDiff.daysDiff ~= 0 then
		comment = math.abs(tDiff.daysDiff)..'天'..((tDiff.daysDiff<0) and '前' or '后')
	end
	
	return comment
end

--=========================这是测试函数=======================
local function test()
	local alltList = allt()
	local idx
	print("allt")
	for idx=1,#alltList do
		print('\t'..alltList[idx])
	end
	
	local lunarList,jqList,dateList = lunar.jqListComming()
	print("lunarInfo")
	for idx=1,#lunarList do
		print('\t'..lunarList[idx]..'\t'..jqList[idx]..'\t'..dateList[idx])
	end
	
	local wInfo = week()
	print("week info")
	for idx=1,#wInfo do
		print('\t'..wInfo[idx])
	end
end

--=========================模块化封装=========================
function M.init(...)
	print("-> M.init called here")
	
	--抛出功能函数
	M.jqListComming = lunar.jqListComming
	M.jqIdxByName = lunar.jqIdxByName
	M.jqInfoByTime = lunar.jqInfoByTime
	M.jqListBuild = lunar.jqListBuild
	
	M.timeInfoByTime = timeInfoByTime
	M.alltimeInfo = alltimeInfo
	M.allt = allt
	M.dateInfoByTime = dateInfoByTime
	M.dateInfoByDaysOffset = dateInfoByDaysOffset
	M.week = week
	M.wInfoByTime = wInfoByTime
	M.timeLogo = timeLogo
	M.timeDiff = timeDiff
	M.daysDiffName = daysDiffName
	
	M.setDbg = setDbg
	M.test = test
end

M.init()

return M

以上脚本中，我们整合了包括二十四节气，农历，事件，日期，时间在内的所有与日期时间概念挂钩的信息，同时为了在事件提示时更人性化可阅读，我们实现了语义日期函数。

dateTime_filter.lua

dateTime_filter.lua 脚本将以上所有的日期时间信息进行了整合，以适配rime引擎滤镜调用。dateTime_filter.lua 脚本内容如下：

--dateTime_filter.lua
--Copyright (C) 2023 yaoyuan.dou 
--本脚本主要用于提供一些与时间日期信息相关的处理服务

--引入支持模块，处理日期和时间信息
local ok, res = pcall(require, 'dateTimeModule')
local alltimeInfo = res.alltimeInfo
local jqListComming = res.jqListComming
local jqIdxByName = res.jqIdxByName
local jqInfoByTime = res.jqInfoByTime
local wInfoByTime = res.wInfoByTime
local daysDiffName = res.daysDiffName
local dateInfoByTime = res.dateInfoByTime
local dateInfoByDaysOffset = res.dateInfoByDaysOffset
local timeInfoByTime = res.timeInfoByTime

-- 导入log模块记录日志
local logEnable, log = pcall(require, "runLog")

--创建节气表
res.jqListBuild()

--引入 eventsList 模块，处理日期相关事件信息
local ok, res1 = pcall(require, 'eventsListModule')
local getEventsByKw = res1.getEventsByKw
local getEventsByTime = res1.getEventsByTime

--最长的comment长度限制
local maxLenOfComment = 250

--加载农历信息
local lunarList,jqList,timeList
local thisLunar,thisJq,thisTime
local cands
local theCands
local candTxt_lower
local thisComment
local alltInfo
local dateInfoList
local jqTime
local jqName
local eventsList
local thisEvent
local thisTxt
local wInfo
local timeBase
local timeReBase
local dateInfo

local function Filter(input, env)
	--获取dateTimeInfo开关状态
	local on = true --env.engine.context:get_option("dateTime")
	cands={}
	
	for cand in input:iter() do
		--抛出原选项
		if nil == cands[cand.text] then
			yield(cand)
			cands[cand.text]=true
		end
		if on then
			candTxt_lower = cand.text:lower()
			
			--时间选项整理
			if ({['time']=true,['时间']=true,['现在']=true,['now']=true,['此刻']=true,['此时']=true})[candTxt_lower] then
				--处理时间信息
				alltInfo = alltimeInfo()
				theCands={}
				
				if ({['现在']=true,['now']=true,['此刻']=true,['此时']=true})[candTxt_lower] then
					table.insert(theCands,{candTxt_lower.."("..alltInfo.YYYYMMDD_hhmmss..")",alltInfo.timeLogo})
				end
				table.insert(theCands,{alltInfo.YYYYMMDD_hhmmss,alltInfo.timeLogo})
				table.insert(theCands,{alltInfo.YYYYMMDD_hhmm,alltInfo.timeLogo})
				table.insert(theCands,{alltInfo.YYYYMMDD_W_hhmmss,alltInfo.timeLogo})
				table.insert(theCands,{alltInfo.W_M_Date_hhmmss_YYYY,alltInfo.timeLogo})
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['时辰']=true})[candTxt_lower] then
				local timeInfo = timeInfoByTime()
				theCands={}
				table.insert(theCands,{timeInfo.shiChen,timeInfo.timeLogo})

				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['钟表']=true,['时钟']=true,['clock']=true,['表']=true})[candTxt_lower] then
				local timeInfo = timeInfoByTime()
				theCands={}
				table.insert(theCands,{timeInfo.timeLogo,''})
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['date']=true,['日期']=true,['今天']=true,['今日']=true,['today']=true,['明天']=true,['明日']=true,['后天']=true,['昨天']=true,['前天']=true})[candTxt_lower] then
				--处理日期信息
				if ({['date']=true,['日期']=true,['今天']=true,['今日']=true,['today']=true})[candTxt_lower] then
					dateInfo = dateInfoByDaysOffset(0)
				elseif ({['明天']=true,['明日']=true})[candTxt_lower] then
					dateInfo = dateInfoByDaysOffset(1)
				elseif ({['后天']=true})[candTxt_lower] then
					dateInfo = dateInfoByDaysOffset(2)
				elseif ({['昨天']=true})[candTxt_lower] then
					dateInfo = dateInfoByDaysOffset(-1)
				elseif ({['前天']=true})[candTxt_lower] then
					dateInfo = dateInfoByDaysOffset(-2)
				end
				
				--获取周序信息
				wInfo = wInfoByTime(dateInfo.time)
				--获取今天的事件信息
				eventsList = getEventsByTime(dateInfo.time)
				--获取今天的24节气信息
				jqTime, jqName = jqInfoByTime(dateInfo.time)
				
				--如果今天有特殊事件，则合成事件的comment信息
				local eventsStr = ''
				for idx = 1, #eventsList do
					thisEvent = eventsList[idx]
					if '' ~= eventsStr then
						eventsStr = eventsStr..'\r[]'..thisEvent.c3
					else
						eventsStr = '[]'..thisEvent.c3
					end
				end
				
				theCands = {}
				if ({['今天']=true,['今日']=true,['today']=true,['明天']=true,['明日']=true,['后天']=true,['昨天']=true,['前天']=true})[candTxt_lower] then
					if ''~=eventsStr then
						table.insert(theCands,{candTxt_lower.."("..dateInfo.date_YYYYMMDD..")",eventsStr})
					else
						table.insert(theCands,{candTxt_lower.."("..dateInfo.date_YYYYMMDD..")",''})
					end
					table.insert(theCands,{dateInfo.date_YYYYMMDD_1..' '..wInfo.nameCN,''})
				else
					if ''~=eventsStr then
						table.insert(theCands,{dateInfo.date_YYYYMMDD_1..' '..wInfo.nameCN,eventsStr})
					else
						table.insert(theCands,{dateInfo.date_YYYYMMDD_1..' '..wInfo.nameCN,''})
					end
				end
				
				table.insert(theCands,{dateInfo.date_M_Dth_YYYY_1,''})
				table.insert(theCands,{dateInfo.date_YYYYMMDD,''})
				if jqTime>0 then
					table.insert(theCands,{dateInfo.lunarInfo.lunarDate_1,dateInfo.lunarInfo.jiJieLogo..jqName})
				else
					table.insert(theCands,{dateInfo.lunarInfo.lunarDate_4,dateInfo.lunarInfo.jiJieLogo})
				end
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['周日']=true,['周一']=true,['周二']=true,['周三']=true,['周四']=true,['周五']=true,['周六']=true})[candTxt_lower] then
				--获取今天的周信息
				timeBase = os.date('*t')
				wInfo = wInfoByTime()
				local wOffsetInput = ({['周日']=0,['周一']=1,['周二']=2,['周三']=3,['周四']=4,['周五']=5,['周六']=6})[candTxt_lower]
				
				--调整 base
				timeBase.day = timeBase.day + wOffsetInput - wInfo.offset2Sun
				wInfo = wInfoByTime(os.time(timeBase))
				jqTime, jqName = jqInfoByTime(os.time(timeBase))
				dateInfo = dateInfoByDaysOffset(wOffsetInput-tonumber(os.date('%w')))
				local daysDiff = daysDiffName(os.time(),os.time(timeBase))
				
				eventsList = getEventsByTime(os.time(timeBase))
				local eventsStr = ''
				for idx = 1, #eventsList do
					thisEvent = eventsList[idx]
					if '' ~= eventsStr then
						eventsStr = eventsStr..'\r[]'..thisEvent.c3
					else
						eventsStr = '[]'..thisEvent.c3
					end
				end
				
				local commentStr = ''
				if '今天'==daysDiff then
					commentStr = '[]'
				elseif ''~=daysDiff then
					if os.time() < os.time(timeBase) then
						commentStr = '['..daysDiff..']'
					else
						commentStr = '['..daysDiff..']'
					end
				end
				
				if ''~=jqName then
					if ''==commentStr then
						commentStr = jqName
					else
						commentStr = commentStr..'\r'..jqName
					end
				end
				if ''~=eventsStr then
					if ''==commentStr then
						commentStr = eventsStr
					else
						commentStr = commentStr..'\r'..eventsStr
					end
				end
				
				dateInfoList = {dateInfo.date_YYYYMMDD_1,dateInfo.date_YYYYMMDD_2,dateInfo.date_M_Dth_YYYY_1,dateInfo.date_YYYYMMDD}
				for idx = 1, #dateInfoList do
					thisTxt = dateInfoList[idx]
					if nil == cands[thisTxt] then
						if 1==idx and ''~=commentStr then
							yield(Candidate("word", cand.start, cand._end, thisTxt, commentStr))
						else
							yield(Candidate("word", cand.start, cand._end, thisTxt, ''))
						end
						cands[thisTxt]=true
					end
				end
			elseif ({['lunar']=true,['农历']=true,['节气']=true})[candTxt_lower] then
				--处理农历信息
				lunarList,jqList,timeList = jqListComming()
				
				theCands={}
				
				for idx = 1, math.min(6,#lunarList) do
					thisJq = jqList[idx]
					thisTime = timeList[idx]
					
					dateInfo = dateInfoByTime(thisTime)
					thisLunar = dateInfo.lunarInfo.lunarDate_4
					
					if os.date("%Y/%m/%d",thisTime) == os.date("%Y/%m/%d") then
						thisJq = '/'..dateInfo.lunarInfo.jiJieLogo..thisJq
					else
						local daysDiff = daysDiffName(os.time(),thisTime)
						if '' ~= daysDiff then
							if os.time() < thisTime then
								daysDiff = '['..daysDiff..']'
							else
								daysDiff = '['..daysDiff..']'
							end
						end
						
						thisLunar = dateInfo.lunarInfo.lunarDate_4..'('..thisJq..')'
						thisJq = dateInfo.lunarInfo.jiJieLogo..dateInfo.date_YYYYMMDD..daysDiff
					end
					table.insert(theCands,{thisLunar,thisJq})
				end
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['wx']=true,['周序']=true,['周数']=true})[candTxt_lower] then
				--处理周信息
				wInfo = wInfoByTime()
				
				theCands={}
				table.insert(theCands,{wInfo.xxWxx,''})
				
				--抛出周序选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['本周']=true,['这周']=true,['上周']=true,['下周']=true})[candTxt_lower] then
				--处理周信息
				timeBase = os.date('*t')
				--对齐到周一
				timeBase.day = timeBase.day - os.date('%w') + 1
				if ({['上周']=true})[candTxt_lower] then
					timeBase.day = timeBase.day - 7
				elseif ({['下周']=true})[candTxt_lower] then
					timeBase.day = timeBase.day + 7
				end
				
				wInfo = wInfoByTime(os.time(timeBase))
				
				theCands={}
				if ({['本周']=true,['上周']=true,['下周']=true})[candTxt_lower] then
					table.insert(theCands,{candTxt_lower.."("..wInfo.xxWxx..")",''})
				end
				table.insert(theCands,{wInfo.xxWxx,''})
				
				for idx=0,6 do
					timeReBase = os.date('*t',os.time(timeBase))
					timeReBase.day = timeReBase.day + idx
					local daysDiff = daysDiffName(os.time(),os.time(timeReBase))
					
					--获取事件
					eventsList = getEventsByTime(os.time(timeReBase))
					--节取节气
					local jqT,jqN = jqInfoByTime(os.time(timeReBase))
					--日期信息
					dateInfo = dateInfoByTime(os.time(timeReBase))
					--周序信息
					wInfo = wInfoByTime(os.time(timeReBase))
					
					--如果存在节气，或者存在事件
					if ''~=jqN or 0<#eventsList then
						thisComment = ''
						local daysDiffInfo = os.date("%Y/%m/%d",os.time(timeReBase))
						if os.date("%Y/%m/%d") == os.date("%Y/%m/%d",os.time(timeReBase)) then
							daysDiffInfo = '[]'
						elseif ''~=daysDiff and candTxt_lower~=daysDiff then
							--为了避免关键字与日期差异的信息冗余，增加条件 candTxt_lower~=daysDiff
							if os.time() < os.time(timeReBase) then
								daysDiffInfo = '['..daysDiff..']'
							else
								daysDiffInfo = '['..daysDiff..']'
							end
						end
						--如果节气存在
						if jqT>0 then
							if ''==thisComment then
								if ''~=daysDiffInfo then
									thisComment = dateInfo.lunarInfo.jiJieLogo..jqN..daysDiffInfo
									daysDiffInfo = ''
								else
									thisComment = dateInfo.lunarInfo.jiJieLogo..jqN
								end
							else
								if ''~=daysDiffInfo then
									thisComment = thisComment..'\r'..dateInfo.lunarInfo.jiJieLogo..jqN..daysDiffInfo
									daysDiffInfo = ''
								else
									thisComment = thisComment..'\r'..dateInfo.lunarInfo.jiJieLogo..jqN
								end
							end
						end
						--如果事件存在
						for idx = 1,#eventsList do
							thisEvent = eventsList[idx]
							if ''~=thisEvent.c3 and ''~=thisEvent.cycleType then
								if ''~=daysDiffInfo then
									if ''==thisComment then
										thisComment = '[]'..thisEvent.c3..daysDiffInfo
									else
										thisComment = thisComment..'\r[]'..thisEvent.c3..daysDiffInfo
									end
									daysDiffInfo = ''
								else
									if ''==thisComment then
										thisComment = '[]'..thisEvent.c3
									else
										thisComment = thisComment..'\r[]'..thisEvent.c3
									end
								end
							end
						end
						if ''==thisComment then
							thisComment = ''
						end
						table.insert(theCands,{dateInfo.date_YYYYMMDD_1..' '..wInfo.nameCN,thisComment})
					end
				end
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['week']=true,['星期']=true})[candTxt_lower] then
				--处理周信息
				wInfo = wInfoByTime()
				
				theCands={}
				table.insert(theCands,{wInfo.nameCN,''})
				table.insert(theCands,{wInfo.nameEN,''})
				table.insert(theCands,{wInfo.nameShort,''})
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['本月']=true,['上月']=true,['下月']=true})[candTxt_lower] then
				--处理月份信息
				if ({['本月']=true})[candTxt_lower] then
					dateInfo = dateInfoByTime(os.time())
				elseif ({['上月']=true})[candTxt_lower] then
					dateInfo = dateInfoByDaysOffset(-os.date("%d")-1)
				elseif ({['下月']=true})[candTxt_lower] then
					dateInfo = dateInfoByDaysOffset(45-os.date("%d"))
				end
				
				theCands={}
				if ({['本月']=true,['上月']=true,['下月']=true})[candTxt_lower] then
					table.insert(theCands,{candTxt_lower.."("..dateInfo.date_yyMxx..")",''})
				end
				table.insert(theCands,{dateInfo.date_yyMxx,''})
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif ({['今年']=true,['去年']=true,['明年']=true,['前年']=true,['后年']=true})[candTxt_lower] then
				if ({['今年']=true})[candTxt_lower] then
					dateInfo = dateInfoByTime(os.time({year = tonumber(os.date("%Y")), month = 5, day = 1, hour = 8, min = 0, sec = 0}))
				elseif ({['去年']=true})[candTxt_lower] then
					dateInfo = dateInfoByTime(os.time({year = tonumber(os.date("%Y"))-1, month = 5, day = 1, hour = 8, min = 0, sec = 0}))
				elseif ({['明年']=true})[candTxt_lower] then
					dateInfo = dateInfoByTime(os.time({year = tonumber(os.date("%Y"))+1, month = 5, day = 1, hour = 8, min = 0, sec = 0}))
				elseif ({['前年']=true})[candTxt_lower] then
					dateInfo = dateInfoByTime(os.time({year = tonumber(os.date("%Y"))-2, month = 5, day = 1, hour = 8, min = 0, sec = 0}))
				elseif ({['后年']=true})[candTxt_lower] then
					dateInfo = dateInfoByTime(os.time({year = tonumber(os.date("%Y"))+2, month = 5, day = 1, hour = 8, min = 0, sec = 0}))
				end
				
				theCands={}
				
				table.insert(theCands,{candTxt_lower.."("..dateInfo.YYYY..")",''})
				table.insert(theCands,{dateInfo.lunarInfo.year_shengXiao..'年',''})
				table.insert(theCands,{dateInfo.lunarInfo.year_ganZhi..'年',''})
				table.insert(theCands,{dateInfo.lunarInfo.year_ganZhi.."("..dateInfo.lunarInfo.year_shengXiao..")"..'年',''})
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			elseif jqIdxByName(candTxt_lower)>0 then
				--查找指定的节气信息
				lunarList,jqList,timeList = jqListComming()
				
				local matchFlg = false
				local jqCnt = 0
				
				theCands={}
				for idx = 1, #jqList do
					thisLunar = lunarList[idx]
					thisJq = jqList[idx]
					thisTime = timeList[idx]
					wInfo = wInfoByTime(thisTime)
					dateInfo = dateInfoByTime(thisTime)
					
					if not matchFlg then
						matchFlg = (thisJq == candTxt_lower) or false
					end
					
					if matchFlg then
						local daysDiff = daysDiffName(os.time(),thisTime)
						
						if '今天' == daysDiff then
							thisJq = ' '..thisJq
						else
							if '' ~= daysDiff then
								if os.time() < thisTime then
									daysDiff = '['..daysDiff..']'
								else
									daysDiff = '['..daysDiff..']'
								end
							end
							thisLunar = thisLunar..'('..thisJq..')'
							thisJq = dateInfo.lunarInfo.jiJieLogo..os.date("%Y/%m/%d",thisTime)..daysDiff
						end
						
						--加入周信息
						thisLunar = thisLunar..' '..wInfo.nameCN
						
						if nil == cands[thisLunar] then
							table.insert(theCands,{thisLunar,thisJq})
							
							jqCnt = jqCnt + 1
						end
						if jqCnt >= 4 then
							break
						end
					end
					
				end
				
				--抛出选项
				for idx = 1, #theCands do
					thisTxt = theCands[idx][1]
					thisComment = theCands[idx][2]
					
					if nil == cands[thisTxt] then
						yield(Candidate("word", cand.start, cand._end, thisTxt, thisComment))
						cands[thisTxt] = true
					end
				end
			end
			
			do--事件选项整理
				local eventsList = getEventsByKw(candTxt_lower)
				if 0<#eventsList then
					local timeNow = os.date('*t')
					--校准到零点
					timeNow = os.time({year=timeNow.year,month=timeNow.month,day=timeNow.day,hour=0})
					for idx=1,#eventsList do
						local thisE = eventsList[idx]
						if thisE.time > timeNow then
							dateInfo = dateInfoByTime(thisE.time)
							wInfo = wInfoByTime(thisE.time)
							local tDiff = daysDiffName(thisE.time) or ''
							local thisComment = thisE.c3
							
							local thisCandTxt = dateInfo.date_YYYYMMDD_1..' '..wInfo.nameCN
							if nil==cands[thisCandTxt] and ''~= thisComment then
								if ''==tDiff then
									thisComment = '[]'..thisComment
								else
									if os.time() < thisE.time then
										thisComment = '['..tDiff..']'..thisComment
									else
										thisComment = '['..tDiff..']'..thisComment
									end
								end
								yield(Candidate("word", cand.start, cand._end, thisCandTxt, thisComment))
								
								cands[thisCandTxt]=true
							end
						end
					end
				end
			end
		end
	end
end

return Filter

注意：
截止目前，以上所述的txt文档或者lua文档，均应该在用户文件夹下的lua文件夹内，如下：

rime.lua

一如继往，我们需要在 rime.lua 脚本中将 dateTime_filter 方法转换成 rime引擎滤镜，以便我们在输入方案中配置使用该滤镜。rime.lua脚本内容如下：

help_translator = require("help")
inputShow_translator = require("inputShow")
inputShow_Filter = require("inputShow_Filter")
Upper_Filter = require("Upper_Filter")
dic_4w_Filter = require("dic_4w_Filter")
phraseReplace_Filter = require("phraseReplace_Filter")
pinyinAdding_Filter = require("pinyinAdding_Filter")
dateTime_Filter = require("dateTime_filter")

以上脚本中，注意最后一行，我们在下游的输入方案中配置lua滤镜时，所引用的名称是 ＝ 号左边的 dateTime_Filter 名称，而不是 dateTime_filter（注意大小写）。

wubi_pinyin.custom.yaml

截止目前，我们已经完成了dateTime_Filter滤镜的定义。此处以五笔・拼音输入方案为例，展示如何配置使用 dateTime_Filter 滤镜。

我们在 五笔・拼音 输入方案的方案文档 wubi_pinyin.schema.yaml 的补丁文档 wubi_pinyin.schema.yaml 中增加以下滤镜配置：

# encoding:utf-8
patch:
  engine/filters:									# 设置以下filter
    - simplifier
    - lua_filter@dateTime_Filter					# 时间信息，对于特定的时间或者事件关键字，添加时间信息，例如日期，今天，明天，肝炎，父亲等
    # 上面的滤镜会减少或者改变候先词选项
    - uniquifier									# 过滤重复候选项，依赖 simplifier

上面的配置并不是wubi_pinyin.custom.yaml中的所有配置，此处仅展示了与 dateTime_Filter 滤镜配置有关的部分。

效果欣赏

至此，我们已经完成了所有的dateTime_Filter滤镜的功能配置，保存你的配置，并重新部署你的rime，你应该可以在输入日期时显示如下的效果：

而且，这无关你使用什么输入法，五笔，拼音，双拼，都一样。

配置文档

本文所涉配置文档共 9 个（其中文档 runLog.lua 与滤镜功能无关，文中没有专项介绍），这些文档你可以在 rime中州韵小狼毫须鼠管 dateTime滤镜 日期时间滤镜 配置.zip 下载取用。

如果你可以访问gitHub，你也可以在 dyyRime 中找到完全版本的配置包。

小结

本文分享了一种在rime中州韵小狼毫须鼠管输入法中使用的dateTime滤镜。该滤镜可以实现增强的日期和时间输入效果。同时该滤镜可以支持二十四节气，农历，事件的映射提示和输入。大大扩展了rime中州韵小狼毫须鼠管输入法的功能性和实用性。