【无标题】

前言

搭建XR806环境还是比较曲折的，但胜在社区大佬比较多，遇到的问题都及时发出来了，可以直接找到解决方法。这里就不多赘述，有问题可以发帖提问^-
内心：手上没什么模块，应该玩什么呢，看看大佬玩了啥，mqtt OLED 都是好东西啊，MQTT来了灵感，看看还有什么网络库，果不其然，提供了很多网络库，在里面找到了sntp的，模块库。

值得一提的是，SNTP中提供了获取时间的接口和设置SNTP服务器的接口，但是还是没有研究是不是设置后实时更新的，这个后面再讨论，现在直接使用它来获取时间。

效果

连上网络后，时间才会打印出来。

代码

main.c

#include 
#include "ohos_init.h"
#include "kernel/os/os.h"
#include "wifi_device.h"
#include "sntp.h"

static OS_Thread_t g_main_thread;
static OS_Thread_t g_time_thread;

#define WIFI_DEVICE_CONNECT_AP_SSID "*****************"
#define WIFI_DEVICE_CONNECT_AP_PSK "************" //更改成自己的wifi




static int wifi_device_connect() {
    const char ssid_want_connect[] = WIFI_DEVICE_CONNECT_AP_SSID;
    const char psk[] = WIFI_DEVICE_CONNECT_AP_PSK;

    if(WIFI_SUCCESS != EnableWifi()) {
        printf("Error: EnableWifi fail.\n");
		return;
    }
    printf("EnableWifi Success.\n");

    if (WIFI_STA_ACTIVE == IsWifiActive())
		printf("Wifi is active.\n");

	OS_Sleep(1);

	if (WIFI_SUCCESS != Scan()) {
		printf("Error: Scan fail.\n");
		return;
	}
	printf("Wifi Scan Success.\n");

	OS_Sleep(1);

    WifiScanInfo scan_results[30];
	unsigned int scan_num = 30;

	if (WIFI_SUCCESS != GetScanInfoList(scan_results, &scan_num)) {
		printf("Error: GetScanInfoList fail.\n");
		return;
	}

    WifiDeviceConfig config = { 0 };
	int netId = 0;

    int i;
	for (i = 0; i < scan_num; i++) {
		if (0 == strcmp(scan_results[i].ssid, ssid_want_connect)) {
			memcpy(config.ssid, scan_results[i].ssid,
			       WIFI_MAX_SSID_LEN);
			memcpy(config.bssid, scan_results[i].bssid,
			       WIFI_MAC_LEN);
			strcpy(config.preSharedKey, psk);
			config.securityType = scan_results[i].securityType;
			config.wapiPskType = WIFI_PSK_TYPE_ASCII;
			config.freq = scan_results[i].frequency;
			break;
		}
	}

    if (i >= scan_num) {
		printf("Error: No found ssid in scan_results\n");
		return;
	}
	printf("GetScanInfoList Success.\n");

	if (WIFI_SUCCESS != AddDeviceConfig(&config, &netId)) {
		printf("Error: AddDeviceConfig Fail\n");
		return;
	}
	printf("AddDeviceConfig Success.\n");

	if (WIFI_SUCCESS != ConnectTo(netId)) {
		printf("Error: ConnectTo Fail\n");
		return;
	}
	printf("ConnectTo Success\n");

}



static int my_sntp_init(){
    if(sntp_set_server(0,"0.cn.pool.ntp.org") == 0){
        printf("set OK \r\n");
    }
}


static void MainThread(void *arg)                                               
{
    sntp_time my_time,*time;
    time = &my_time;
    wifi_device_connect();
    my_sntp_init();
    while (1) {
    //printf("hello world!\r\n");
    sntp_get_time(0,&my_time);
    // sntp_request("run");
    //time = sntp_obtain_time();
    printf("Now Time is %d:%d:%d\r\n",my_time.hour-161,my_time.min-139,my_time.sec);
    LOS_Msleep(1000);
    }

}


static void TimeThread(void *arg)                                               
{
    while (1) {
        sntp_request("run");
        LOS_Msleep(1000);
    }
}


void SNTPTestMain(void)                                                              //(2)
{
    printf("SNTP Test Start\n");

    if (OS_ThreadCreate(&g_main_thread, "MainThread", MainThread, NULL,
                        OS_THREAD_PRIO_APP, 4 * 1024) != OS_OK) {
    printf("[ERR] Create MainThread Failed\n");
    }
    if (OS_ThreadCreate(&g_time_thread, "MainThread", TimeThread, NULL,
                        OS_THREAD_PRIO_APP, 4 * 1024) != OS_OK) {
    printf("[ERR] Create MainThread Failed\n");
    }

}

SYS_RUN(SNTPTestMain);        

//必须以app开头 否则不会调用

BUILD.gn

import("//device/xradio/xr806/liteos_m/config.gni")

static_library("app_sntp_Test") {
   configs = []

   sources = [
      "src/main.c",
   ]

   cflags = board_cflags

   include_dirs = board_include_dirs
   include_dirs += [
        ".",
        "//utils/native/lite/include",
        "//foundation/communication/wifi_lite/interfaces/wifiservice",
        "//device/xradio/xr806/xr_skylark/include/net/sntp",
   ]
}

BUILD.gn

group("ohosdemo") {
    deps = [
        "sntp_demo:app_sntp_Test",
        # "hello_demo:app_hello",
        #"iot_peripheral:app_peripheral",
        #"wlan_demo:app_WlanTest",
        # "LED:app_led",
    ]
}

最后

main.c提供了两种获取时间的方法

1. 主动调用的方法sntp_get_time(0,&my_time);
2. 开一个线程出发更新sntp_request(“run”);

！注意
入口必须以app开头否则不会执行
构建过程遇到分区不够的时候，参考论坛方法解决
sntp有时候获取不到时间，需要设置时区