TensorRT英伟达官方示例解析（三）

系列文章目录

TensorRT英伟达官方示例解析（一）
TensorRT英伟达官方示例解析（二）
TensorRT英伟达官方示例解析（三）

---

---

前言

---

一、04-BuildEngineByONNXParser----pyTorch-ONNX-TensorRT

以pyTorch-ONNX-TensorRT为例

python3 main.py

#
# Copyright (c) 2021-2023, NVIDIA CORPORATION. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

import os
from datetime import datetime as dt
from glob import glob

import calibrator
import cv2
import numpy as np
import tensorrt as trt
import torch as t
import torch.nn.functional as F
from cuda import cudart
from torch.autograd import Variable

np.random.seed(31193)
t.manual_seed(97)
t.cuda.manual_seed_all(97)
t.backends.cudnn.deterministic = True
nTrainBatchSize = 128
nHeight = 28
nWidth = 28
onnxFile = "./model.onnx"
trtFile = "./model.plan"
dataPath = os.path.dirname(os.path.realpath(__file__)) + "/../../00-MNISTData/"
trainFileList = sorted(glob(dataPath + "train/*.jpg"))
testFileList = sorted(glob(dataPath + "test/*.jpg"))
inferenceImage = dataPath + "8.png"

# for FP16 mode
bUseFP16Mode = False
# for INT8 model
bUseINT8Mode = False
nCalibration = 1
cacheFile = "./int8.cache"
calibrationDataPath = dataPath + "test/"

os.system("rm -rf ./*.onnx ./*.plan ./*.cache")
np.set_printoptions(precision=3, linewidth=200, suppress=True)
cudart.cudaDeviceSynchronize()

# Create network and train model in pyTorch ------------------------------------
class Net(t.nn.Module):

    def __init__(self):
        super(Net, self).__init__()
        self.conv1 = t.nn.Conv2d(1, 32, (5, 5), padding=(2, 2), bias=True)
        self.conv2 = t.nn.Conv2d(32, 64, (5, 5), padding=(2, 2), bias=True)
        self.fc1 = t.nn.Linear(64 * 7 * 7, 1024, bias=True)
        self.fc2 = t.nn.Linear(1024, 10, bias=True)

    def forward(self, x):
        x = F.max_pool2d(F.relu(self.conv1(x)), (2, 2))
        x = F.max_pool2d(F.relu(self.conv2(x)), (2, 2))
        x = x.reshape(-1, 64 * 7 * 7)
        x = F.relu(self.fc1(x))
        y = self.fc2(x)
        z = F.softmax(y, dim=1)
        z = t.argmax(z, dim=1)
        return y, z

class MyData(t.utils.data.Dataset):

    def __init__(self, isTrain=True):
        if isTrain:
            self.data = trainFileList
        else:
            self.data = testFileList

    def __getitem__(self, index):
        imageName = self.data[index]
        data = cv2.imread(imageName, cv2.IMREAD_GRAYSCALE)
        label = np.zeros(10, dtype=np.float32)
        index = int(imageName[-7])
        label[index] = 1
        return t.from_numpy(data.reshape(1, nHeight, nWidth).astype(np.float32)), t.from_numpy(label)

    def __len__(self):
        return len(self.data)

model = Net().cuda()
ceLoss = t.nn.CrossEntropyLoss()
opt = t.optim.Adam(model.parameters(), lr=0.001)
trainDataset = MyData(True)
testDataset = MyData(False)
trainLoader = t.utils.data.DataLoader(dataset=trainDataset, batch_size=nTrainBatchSize, shuffle=True)
testLoader = t.utils.data.DataLoader(dataset=testDataset, batch_size=nTrainBatchSize, shuffle=True)

for epoch in range(10):
    for xTrain, yTrain in trainLoader:
        xTrain = Variable(xTrain).cuda()
        yTrain = Variable(yTrain).cuda()
        opt.zero_grad()
        y_, z = model(xTrain)
        loss = ceLoss(y_, yTrain)
        loss.backward()
        opt.step()

    with t.no_grad():
        acc = 0
        n = 0
        for xTest, yTest in testLoader:
            xTest = Variable(xTest).cuda()
            yTest = Variable(yTest).cuda()
            y_, z = model(xTest)
            acc += t.sum(z == t.matmul(yTest, t.Tensor([0, 1, 2, 3, 4, 5, 6, 7, 8, 9]).to("cuda:0"))).cpu().numpy()
            n += xTest.shape[0]
        print("%s, epoch %2d, loss = %f, test acc = %f" % (dt.now(), epoch + 1, loss.data, acc / n))

print("Succeeded building model in pyTorch!")

# Export model as ONNX file ----------------------------------------------------
t.onnx.export(model, t.randn(1, 1, nHeight, nWidth, device="cuda"), onnxFile, input_names=["x"], output_names=["y", "z"], do_constant_folding=True, verbose=True, keep_initializers_as_inputs=True, opset_version=12, dynamic_axes={"x": {0: "nBatchSize"}, "z": {0: "nBatchSize"}})
print("Succeeded converting model into ONNX!")

# Parse network, rebuild network and do inference in TensorRT ------------------
logger = trt.Logger(trt.Logger.VERBOSE)
builder = trt.Builder(logger)
network = builder.create_network(1 << int(trt.NetworkDefinitionCreationFlag.EXPLICIT_BATCH))
profile = builder.create_optimization_profile()
config = builder.create_builder_config()
if bUseFP16Mode:
    config.set_flag(trt.BuilderFlag.FP16)
if bUseINT8Mode:
    config.set_flag(trt.BuilderFlag.INT8)
    config.int8_calibrator = calibrator.MyCalibrator(calibrationDataPath, nCalibration, (1, 1, nHeight, nWidth), cacheFile)

parser = trt.OnnxParser(network, logger)
if not os.path.exists(onnxFile):
    print("Failed finding ONNX file!")
    exit()
print("Succeeded finding ONNX file!")
with open(onnxFile, "rb") as model:
    if not parser.parse(model.read()):
        print("Failed parsing .onnx file!")
        for error in range(parser.num_errors):
            print(parser.get_error(error))
        exit()
    print("Succeeded parsing .onnx file!")

inputTensor = network.get_input(0)
profile.set_shape(inputTensor.name, [1, 1, nHeight, nWidth], [4, 1, nHeight, nWidth], [8, 1, nHeight, nWidth])
config.add_optimization_profile(profile)

network.unmark_output(network.get_output(0))  # remove output tensor "y"
engineString = builder.build_serialized_network(network, config)
if engineString == None:
    print("Failed building engine!")
    exit()
print("Succeeded building engine!")
with open(trtFile, "wb") as f:
    f.write(engineString)
engine = trt.Runtime(logger).deserialize_cuda_engine(engineString)
nIO = engine.num_io_tensors
lTensorName = [engine.get_tensor_name(i) for i in range(nIO)]
nInput = [engine.get_tensor_mode(lTensorName[i]) for i in range(nIO)].count(trt.TensorIOMode.INPUT)

context = engine.create_execution_context()
context.set_input_shape(lTensorName[0], [1, 1, nHeight, nWidth])
for i in range(nIO):
    print("[%2d]%s->" % (i, "Input " if i < nInput else "Output"), engine.get_tensor_dtype(lTensorName[i]), engine.get_tensor_shape(lTensorName[i]), context.get_tensor_shape(lTensorName[i]), lTensorName[i])

bufferH = []
data = cv2.imread(inferenceImage, cv2.IMREAD_GRAYSCALE).astype(np.float32).reshape(1, 1, nHeight, nWidth)
bufferH.append(np.ascontiguousarray(data))
for i in range(nInput, nIO):
    bufferH.append(np.empty(context.get_tensor_shape(lTensorName[i]), dtype=trt.nptype(engine.get_tensor_dtype(lTensorName[i]))))
bufferD = []
for i in range(nIO):
    bufferD.append(cudart.cudaMalloc(bufferH[i].nbytes)[1])

for i in range(nInput):
    cudart.cudaMemcpy(bufferD[i], bufferH[i].ctypes.data, bufferH[i].nbytes, cudart.cudaMemcpyKind.cudaMemcpyHostToDevice)

for i in range(nIO):
    context.set_tensor_address(lTensorName[i], int(bufferD[i]))

context.execute_async_v3(0)

for i in range(nInput, nIO):
    cudart.cudaMemcpy(bufferH[i].ctypes.data, bufferD[i], bufferH[i].nbytes, cudart.cudaMemcpyKind.cudaMemcpyDeviceToHost)

for i in range(nIO):
    print(lTensorName[i])
    print(bufferH[i])

for b in bufferD:
    cudart.cudaFree(b)

print("Succeeded running model in TensorRT!")

生成了model.onnx和model.plan

生成 TRT 内部表示

engineString = builder.build_serialized_network(network, config)
if engineString == None:
    print("Failed building engine!")
    exit()
print("Succeeded building engine!")
with open(trtFile, "wb") as f:
    f.write(engineString)

生成 Engine

engine = trt.Runtime(logger).deserialize_cuda_engine(engineString)
nIO = engine.num_io_tensors
lTensorName = [engine.get_tensor_name(i) for i in range(nIO)]
nInput = [engine.get_tensor_mode(lTensorName[i]) for i in range(nIO)].count(trt.TensorIOMode.INPUT)

创建 Context

context = engine.create_execution_context()
context.set_input_shape(lTensorName[0], [1, 1, nHeight, nWidth])
for i in range(nIO):
    print("[%2d]%s->" % (i, "Input " if i < nInput else "Output"), engine.get_tensor_dtype(lTensorName[i]), engine.get_tensor_shape(lTensorName[i]), context.get_tensor_shape(lTensorName[i]), lTensorName[i])

Buffer

内存和显存的申请

➢ inputHost = np.ascontiguousarray(inputData) # 不要忘了 ascontiguousarray！

➢ outputHost = np.empty(context.get_tensor_shape(iTensorName[1]), trt.nptype(engine.get_tensor_dtype(iTensorName[1])))

➢ inputDevice = cudart.cudaMalloc(inputHost.nbytes)[1]

➢ outputDevice = cudart.cudaMalloc(outputHost.nbytes)[1]

➢ context.set_tensor_address(iTensorName[0], inputDevice)

➢ context.set_tensor_address(iTensorName[1], outputDevice)

内存和显存之间的拷贝

➢ cudart.cudaMemcpy(inputDevice, inputHost.ctypes.data, inputHost.nbytes, cudart.cudaMemcpyKind.cudaMemcpyHostToDevice)

➢ cudart.cudaMemcpy(outputHost.ctypes.data, outputDevice, outputHost.nbytes, cudart.cudaMemcpyKind.cudaMemcpyDeviceToHost)

推理完成后释放显存

➢ cudart.cudaFree(inputDevice)

➢ cudart.cudaFree(outputDevice)

bufferH = []
data = cv2.imread(inferenceImage, cv2.IMREAD_GRAYSCALE).astype(np.float32).reshape(1, 1, nHeight, nWidth)
bufferH.append(np.ascontiguousarray(data))
for i in range(nInput, nIO):
    bufferH.append(np.empty(context.get_tensor_shape(lTensorName[i]), dtype=trt.nptype(engine.get_tensor_dtype(lTensorName[i]))))
bufferD = []
for i in range(nIO):
    bufferD.append(cudart.cudaMalloc(bufferH[i].nbytes)[1])

for i in range(nInput):
    cudart.cudaMemcpy(bufferD[i], bufferH[i].ctypes.data, bufferH[i].nbytes, cudart.cudaMemcpyKind.cudaMemcpyHostToDevice)

for i in range(nIO):
    context.set_tensor_address(lTensorName[i], int(bufferD[i]))

context.execute_async_v3(0)

for i in range(nInput, nIO):
    cudart.cudaMemcpy(bufferH[i].ctypes.data, bufferD[i], bufferH[i].nbytes, cudart.cudaMemcpyKind.cudaMemcpyDeviceToHost)

for i in range(nIO):
    print(lTensorName[i])
    print(bufferH[i])

for b in bufferD:
    cudart.cudaFree(b)

二、04-BuildEngineByONNXParser----pyTorch-ONNX-TensorRT-QAT

pip install --no-deps pytorch_quantization
pip install -i https://pypi.tuna.tsinghua.edu.cn/simple pyyaml

python main.py

模型量化（Quantization）：通过 PyTorch Quantization 库对模型进行量化，包括使用最大值校准器（max calibrator）或直方图校准器（histogram calibrator）。

 Calibrate model in pyTorch ---------------------------------------------------
quant_modules.initialize()

with t.no_grad():
    # turn on calibration tool
    for name, module in model.named_modules():
        if isinstance(module, qnn.TensorQuantizer):
            if module._calibrator is not None:
                module.disable_quant()
                module.enable_calib()
            else:
                module.disable()

    for i, (xTrain, yTrain) in enumerate(trainLoader):
        if i >= nCalibrationBatch:
            break
        model(Variable(xTrain).cuda())

    # turn off calibration tool
    for name, module in model.named_modules():
        if isinstance(module, qnn.TensorQuantizer):
            if module._calibrator is not None:
                module.enable_quant()
                module.disable_calib()
            else:
                module.enable()

    def computeArgMax(model, **kwargs):
        for _, module in model.named_modules():
            if isinstance(module, qnn.TensorQuantizer) and module._calibrator is not None:
                if isinstance(module._calibrator, calib.MaxCalibrator):
                    module.load_calib_amax()
                else:
                    module.load_calib_amax(**kwargs)

    if calibrator == "max":
        computeArgMax(model, method="max")
        #modelName = "./model-max-%d.pth" % (nCalibrationBatch * trainLoader.batch_size)

    else:
        for percentile in percentileList:
            computeArgMax(model, method="percentile")
            #modelName = "./model-percentile-%f-%d.pth" % (percentile, nCalibrationBatch * trainLoader.batch_size)

        for method in ["mse", "entropy"]:
            computeArgMax(model, method=method)
            #modelName = "./model-%s-%f.pth" % (method, percentile)

    #t.save(model.state_dict(), modelName)
print("Succeeded calibrating model in pyTorch!")

这段代码展示了如何在 PyTorch 中进行模型校准（calibration）。模型校准是量化（quantization）的一部分，它用于确定量化操作的参数，例如最大值或百分位数。

首先，代码通过调用 initialize() 方法初始化量化模块。然后，通过遍历模型中的每个模块，找到需要进行量化的 TensorQuantizer 模块，并为其打开校准工具。

接下来，代码开始进行校准。通过遍历训练数据集中的一定数量的批次，使用模型对输入数据进行前向传播，以触发校准过程。在校准期间，量化模块的量化操作被禁用，而校准操作被启用。

校准完成后，代码关闭校准工具，并根据不同的校准方法计算和加载相应的校准参数。如果使用最大值校准器，会调用 load_calib_amax() 方法加载校准参数；如果使用百分位数校准器，还需指定百分位数的值。

最后，代码保存校准后的模型参数。根据不同的校准方法，会生成相应命名的模型文件。

模型量化相关可参考：https://blog.csdn.net/m0_70420861/article/details/135559743

---

总结

04-BuildEngineByONNXParser