dev的动态汉化

放控件TcxLocalizer。将其FIlename设定成汉化文件.ini。选择Locale的值是中文，然后active=true。OK了文件如下

ini如下：

[2052]
CHINA_STR="中国"
cxExportListIndexError="列表索引超出范围(%d)"
cxNavigator_DeleteRecordQuestion="删除记录？"
cxNavigatorHint_Append="添加记录"
cxNavigatorHint_Cancel="取消修改"
cxNavigatorHint_Delete="删除记录"
cxNavigatorHint_Edit="修改记录"
cxNavigatorHint_Filter="数据过滤"
cxNavigatorHint_First="第一条记录"
cxNavigatorHint_GotoBookmark="转到书签"
cxNavigatorHint_Insert="插入记录"
cxNavigatorHint_Last="最后一条记录"
cxNavigatorHint_Next="下一条记录"
cxNavigatorHint_NextPage="下页"
cxNavigatorHint_Post="提交修改"
cxNavigatorHint_Prior="上一条记录"
cxNavigatorHint_PriorPage="上页"
cxNavigatorHint_Refresh="刷新数据"
cxNavigatorHint_SaveBookmark="保存书签"
cxNavigatorInfoPanelDefaultDisplayMask="第[RecordIndex]条，共[RecordCount]条"
cxPreviewDescription="预览样式检查"
cxSBlobButtonCancel="取消(&C)"
cxSBlobButtonClose="关闭(&C)"
cxSBlobButtonOK="确定(&O)"
cxSBlobMemo="(内容)"
cxSBlobMemoEmpty="(内容)"
cxSBlobPicture="(图片)"
cxSBlobPictureEmpty="(图片)"
cxSCantDeleteAncestor="选择内容包含一个被祖先窗体引用的组件，不能删除"
cxSCheckComboBoxEmptySelectionText="未选择"
cxSCheckComboBoxStatesItemsPropertyDlgCaption="cxCheckComboBox - CheckStates 编辑器"
cxSCheckControlIncorrectItemCount="如果EditValueFormat是cvfInteger那项目数量不能大于64"
cxSCheckGroupStatesItemsPropertyDlgCaption="cxCheckGroup - 复选框状态编辑器"
cxSColorComboBoxDefaultDescription="没有选择颜色"
cxSContainerPanelStyle="容器栏"
cxSDataCustomDataSourceInvalidCompare="GetInfoForCompare没有实现"
cxSDataInvalidStreamFormat="流格式无效"
cxSDataItemExistError="项目已经存在"
cxSDataItemIndexError="项目索引超出范围"
cxSDataProviderModeError="提供者模式不支持此操作"
cxSDataReadError="流读取错误"
cxSDataRecordIndexError="记录索引超出范围"
cxSDataRowIndexError="行索引超出范围"
cxSDataWriteError="流写入错误"
cxSDateBOM="月初"
cxSDateEOM="月底"
cxSDateError="无效日期"
cxSDateFifth="第五"
cxSDateFirst="第一"
cxSDateFourth="第四"
cxSDateFriday="星期五"
cxSDateMonday="星期一"
cxSDateNow="现在"
cxSDatePopupCancel="取消"
cxSDatePopupClear="清除"
cxSDatePopupNow="现在"
cxSDatePopupOK="确定"
cxSDatePopupToday="今天"
cxSDateSaturday="星期六"
cxSDateSecond="第二"
cxSDateSeventh="第七"
cxSDateSixth="第六"
cxSDateSunday="星期天"
cxSDateThird="第三"
cxSDateThursday="星期四"
cxSDateToday="今天"
cxSDateTomorrow="明天"
cxSDateTuesday="星期二"
cxSDateWednesday="星期三"
cxSDateYesterday="昨天"
cxSDBDetailFilterControllerNotFound="DetailFilterController没有找到"
cxSDBKeyFieldNotFound="未发现主键"
cxSDBNotInGridMode="DataController没有在GridMode中"
cxSEditButtonCancel="取消"
cxSEditButtonOK="确定"
cxSEditCheckBoxChecked="True"
cxSEditCheckBoxGrayed=""
cxSEditCheckBoxUnchecked="False"
cxSEditCheckGroupCaptionStateDelimiter=": "
cxSEditCheckGroupChecked="选中"
cxSEditCheckGroupGrayed="灰色"
cxSEditCheckGroupUnchecked="未选择"
cxSEditDateConvertError="不能转换为日期"
cxSEditInvalidRepositoryItem="资源库项目不合格"
cxSEditNumericValueConvertError="不能转换为数值"
cxSEditPopupCircularReferencingError="不允许循环引用"
cxSEditPostError="错误发生在提交修改值的时候"
cxSEditRepositoryExtLookupComboBoxItem="ExtLookupComboBox|一个使用QuantumGrid作为其下拉控件的高级查找"
cxSEditRichEditCallBackFail="RichEdit： 无法设置回调"
cxSEditRichEditCopyCaption="复制(&C)"
cxSEditRichEditCutCaption="剪切(&T)"
cxSEditRichEditDeleteCaption="删除(&D)"
cxSEditRichEditLibraryError="不能载入 RichEdit 库"
cxSEditRichEditLineInsertionError="RichEdit行插入错误"
cxSEditRichEditLinkFail="RichEdit：不能连接到无效源"
cxSEditRichEditLoadFail="读取流失败"
cxSEditRichEditOleInterfaceFail="RichEdit：未能获取 IRichEditOle 接口"
cxSEditRichEditPasteCaption="粘贴(&P)"
cxSEditRichEditRedoCaption="重做(&R)"
cxSEditRichEditSaveFail="保存流失败"
cxSEditRichEditSelectAllCaption="全选(&A)"
cxSEditRichEditSelectionSaveFail="保存选择的流失败"
cxSEditRichEditUndoCaption="撤销(&U)"
cxSEditTimeConvertError="不能够转换为时间"
cxSEditValidateErrorText="非法输入值，请按ESC键放弃修改"
cxSEditValueOutOfBounds="数值越界"
cxSFilterAddCondition="添加条件(&C)"
cxSFilterAddGroup="添加组(&G)"
cxSFilterAndCaption="并且"
cxSFilterBlankCaption="空白"
cxSFilterBoolOperatorAnd="并且"
cxSFilterBoolOperatorNotAnd="非并且"
cxSFilterBoolOperatorNotOr="非或者"
cxSFilterBoolOperatorOr="或者"
cxSFilterBoxAllCaption="(全部)"
cxSFilterBoxBlanksCaption="(空白的)"
cxSFilterBoxCustomCaption="(自定义...)"
cxSFilterBoxNonBlanksCaption="(非空)"
cxSFilterClearAll="全部清除(&A)"
cxSFilterControlDialogActionApplyCaption="应用(&A)"
cxSFilterControlDialogActionCancelCaption="取消"
cxSFilterControlDialogActionOkCaption="确定"
cxSFilterControlDialogActionOpenCaption="打开(&O)..."
cxSFilterControlDialogActionOpenHint="打开|打开现有的过滤器"
cxSFilterControlDialogActionSaveCaption="另存为(&S)..."
cxSFilterControlDialogActionSaveHint="另存为|用新的名字保存当前激活的过滤器"
cxSFilterControlDialogCaption="过滤生成器"
cxSFilterControlDialogFileExt="flt"
cxSFilterControlDialogFileFilter="过滤方案(*.flt)|*.flt"
cxSFilterControlDialogNewFile="未命名.flt"
cxSFilterControlDialogOpenDialogCaption="打开一个已经存在的文件"
cxSFilterControlDialogSaveDialogCaption="保存当前活动文件"
cxSFilterControlNullString="<空>"
cxSFilterDialogCaption="自定义过滤"
cxSFilterDialogCharactersSeries="代表任意字符序列"
cxSFilterDialogInvalidValue="无效值"
cxSFilterDialogOperationAnd="并且"
cxSFilterDialogOperationOr="或者"
cxSFilterDialogRows="显示行:"
cxSFilterDialogSingleCharacter="代表任何单个字符"
cxSFilterDialogUse="使用"
cxSFilterErrorBuilding="无法从源代码构建过滤器"
cxSFilterFooterAddCondition="按此按钮增加新条件"
cxSFilterGroupCaption="使用下面的条件"
cxSFilterNotCaption="不是"
cxSFilterOperatorBeginsWith="以...开始"
cxSFilterOperatorBetween="从...至..."
cxSFilterOperatorContains="包含"
cxSFilterOperatorDoesNotBeginWith="不以...开始"
cxSFilterOperatorDoesNotContain="不包含"
cxSFilterOperatorDoesNotEndWith="不以...结尾"
cxSFilterOperatorEndsWith="以...结尾"
cxSFilterOperatorEqual="="
cxSFilterOperatorFuture="以后"
cxSFilterOperatorGreater=">"
cxSFilterOperatorGreaterEqual=">="
cxSFilterOperatorInList="在...中"
cxSFilterOperatorIsNotNull="不为空"
cxSFilterOperatorIsNull="为空"
cxSFilterOperatorLast14Days="14天前"
cxSFilterOperatorLast30Days="30天前"
cxSFilterOperatorLast7Days="7天前"
cxSFilterOperatorLastMonth="一个月前"
cxSFilterOperatorLastTwoWeeks="两周前"
cxSFilterOperatorLastWeek="一周前"
cxSFilterOperatorLastYear="一年前"
cxSFilterOperatorLess="<"
cxSFilterOperatorLessEqual="<="
cxSFilterOperatorLike="包含"
cxSFilterOperatorNext14Days="14天内"
cxSFilterOperatorNext30Days="30天内"
cxSFilterOperatorNext7Days="7天内"
cxSFilterOperatorNextMonth="下月内"
cxSFilterOperatorNextTwoWeeks="下两周内"
cxSFilterOperatorNextWeek="下周内"
cxSFilterOperatorNextYear="明年内"
cxSFilterOperatorNotBetween="不在区间"
cxSFilterOperatorNotEqual="<>"
cxSFilterOperatorNotInList="不在...中"
cxSFilterOperatorNotLike="不包含"
cxSFilterOperatorPast="过去的"
cxSFilterOperatorThisMonth="本月内"
cxSFilterOperatorThisWeek="本周内"
cxSFilterOperatorThisYear="本年内"
cxSFilterOperatorToday="今天"
cxSFilterOperatorTomorrow="明天"
cxSFilterOperatorYesterday="昨天"
cxSFilterOrCaption="或者"
cxSFilterRemoveRow="删除行(&R)"
cxSFilterRootButtonCaption="过滤器"
cxSFilterRootGroupCaption="<根>"
cxSGridAlignCenter="居中"
cxSGridAlignLeft="左对齐"
cxSGridAlignmentSubMenu="排列"
cxSGridAlignRight="右对齐"
cxSGridAvgMenuItem="平均"
cxSGridBestFit="自适应"
cxSGridBestFitAllColumns="自适应(全部列)"
cxSGridClearGrouping="清空分组"
cxSGridClearSorting="清空排序"
cxSGridCountMenuItem="计数"
cxSGridFieldChooser="字段选择器"
cxSGridFullCollapse="全部折叠"
cxSGridFullExpand="全部展开"
cxSGridGroupByBox="分组栏"
cxSGridGroupByThisField="以此字段分组"
cxSGridHideGroupByBox="隐藏分组栏"
cxSGridMaxMenuItem="最大"
cxSGridMinMenuItem="最小"
cxSGridNone="无"
cxSGridNoneMenuItem="无"
cxSGridRemoveColumn="删除此列"
cxSGridRemoveThisGroupItem="移除此分组"
cxSGridShowFindPanel="查找栏"
cxSGridShowFooter="合计"
cxSGridShowGroupFooter="小计"
cxSGridSortByGroupValues="按分组值排序"
cxSGridSortBySummary="%s 至 %s"
cxSGridSortBySummaryCaption="按分组汇总排序:"
cxSGridSortColumnAsc="升序排序"
cxSGridSortColumnDesc="降序排序"
cxSGridSumMenuItem="汇总"
cxSKeyboardStatePanelStyle="键盘状态栏"
cxSMenuItemCaptionAssignFromWebCam="从摄像头分配(&M)..."
cxSMenuItemCaptionCopy="复制(&C)"
cxSMenuItemCaptionCut="剪切(&T)"
cxSMenuItemCaptionDelete="删除(&D)"
cxSMenuItemCaptionLoad="读取(&L)..."
cxSMenuItemCaptionPaste="粘贴(&P)"
cxSMenuItemCaptionSave="另存为(&A)..."
cxSRadioGroupDefaultCaption=""
cxSSpinEditInvalidNumericValue="数值无效"
cxSStateIndicatorPanelStyle="状态指示栏"
cxSTextFalse="False"
cxSTextPanelStyle="文本栏"
cxSTextTrue="True"
cxSToolbarPanelStyle="工具栏"
cxSvgAssignRowsError="不能分配行"
cxSvgCancelCaption="取消"
cxSvgCustomizeCaption="自定义"
cxSvgCustomizeCategoriesCaption="分类"
cxSvgCustomizeDeleteCategory="删除(&D)"
cxSvgCustomizeNewCategory="新建(&N)..."
cxSvgCustomizeRowsCaption="行"
cxSvgDeletingConfirmationCaption="确认"
cxSvgDeletingFocusedConfirmationText="删除记录？"
cxSvgExportNotVisibleControl="不能输出隐藏控件"
cxSvgIndexError="索引错误"
cxSvgInvalidRowClass="不能新建行"
cxSvgLayoutEditorCaption="布局编辑器"
cxSvgLayoutEditorCustomize="自定义(&C)"
cxSvgNewCategoryCaption="新建分类"
cxSvgNewCategoryLabelCaption="分类(&C):"
cxSvgOKCaption="确定"
cxSvgRTTICollectionAdd="添加(&A)"
cxSvgRTTICollectionAddHint="新建"
cxSvgRTTICollectionDelete="删除(&D)"
cxSvgRTTICollectionDeleteHint="删除选择的"
cxSvgRTTICollectionEditCaption="正在编辑 %s%s%s"
cxSvgRTTICollectionMoveDown="下移(&N)"
cxSvgRTTICollectionMoveDownHint="下移选择内容"
cxSvgRTTICollectionMoveUp="上移(&U)"
cxSvgRTTICollectionMoveUpHint="上移选择内容"
cxSvgRTTICollectionSelectAll="全选(&S)"
cxSvgRTTICollectionTextLabel="文本标签(&L)"
cxSvgRTTICollectionToolbar="工具栏(&T)"
cxSvgRTTIInspectorEmptyGlyph="(无)"
cxSvgUnknown="(未知)"
cxTextDescription="ABC"
dxDBTreeViewSmartLoadS="在选项参数中设置trSmartRecordLoad来减少读取时间,是否现在设置?"
dxSBAR_ACCESSIBILITY_RIBBONNAME="功能区"
dxSBAR_ACCESSIBILITY_RIBBONTABCOLLECTIONNAME="功能区选项页"
dxSBAR_ADDEX="添加..."
dxSBAR_ADDGALLERYNAME="图库"
dxSBAR_ADDREMOVEBUTTONS="添加或删除按钮(&A)"
dxSBAR_ADDTOQAT="添加到快速访问工具栏(&A)"
dxSBAR_ADDTOQATITEMNAME="%s 添加到快速访问工具条(&A)"
dxSBAR_APPMENUOUTSIDERIBBON="应用程序菜单不能显示在功能区外"
dxSBAR_BARMANAGERBADOWNER="TdxBarManager的所有者应具有 TWinControl"
dxSBAR_BARMANAGERMORETHANONE="一个控件只能包含一个TdxBarManager"
dxSBAR_BTNCAPTION_CANCEL="取消"
dxSBAR_BTNCAPTION_DELETE="删除"
dxSBAR_BTNCAPTION_EDIT="修改"
dxSBAR_BTNCAPTION_FIRST="第一条"
dxSBAR_BTNCAPTION_INSERT="插入"
dxSBAR_BTNCAPTION_LAST="最后一条"
dxSBAR_BTNCAPTION_NEXT="下一条"
dxSBAR_BTNCAPTION_POST="提交"
dxSBAR_BTNCAPTION_PRIOR="上一条"
dxSBAR_BTNCAPTION_REFRESH="刷新"
dxSBAR_BUTTONDEFAULTACTIONDESCRIPTION="按下"
dxSBAR_CANCEL="取消"
dxSBAR_CANTASSIGNCONTROL="不能分配多个TdxBarControlContainerItem控件"
dxSBAR_CANTFINDBARMANAGERFORSTATUSBAR="没有找到状态栏的栏管理器"
dxSBAR_CANTMERGEBARMANAGER="您不能对指定的工具栏管理器进行合并操作"
dxSBAR_CANTMERGETOOLBAR="您不能对指定的工具条进行合并操作"
dxSBAR_CANTMERGEWITHMERGEDTOOLBAR="您不能用已被合并的工具条来合并其他工具条"
dxSBAR_CANTPLACEQUICKACCESSGROUPBUTTON="您只能将TdxRibbonQuickAccessGroupButton放置在TdxRibbonQuickAccessToolbar上"
dxSBAR_CANTPLACERIBBONGALLERY="TdxRibbonGalleryItem只能放置到一个子菜单或功能区控件中"
dxSBAR_CANTPLACESEPARATOR="分隔符不能置于指定工具栏"
dxSBAR_CANTPLACESKINCHOOSERGALLERY="TdxSkinChooserGalleryItem只能放置到一个子菜单或功能区控件中"
dxSBAR_CANTUNMERGETOOLBAR="不能分离指定的工具栏"
dxSBAR_CAPTION="自定义"
dxSBAR_CATEGORIES="分类(&G):"
dxSBAR_CATEGORYADD="添加类别"
dxSBAR_CATEGORYINSERT="插入类别"
dxSBAR_CATEGORYNAME="类别名称(&C):"
dxSBAR_CATEGORYRENAME="重命名类别"
dxSBAR_CLEAR="清除"
dxSBAR_CLEARGALLERYFILTER="清空过滤"
dxSBAR_CLOSE="关闭"
dxSBAR_COLOR_STR_0="黑色"
dxSBAR_COLOR_STR_1="褐色"
dxSBAR_COLOR_STR_10="浅绿色"
dxSBAR_COLOR_STR_11="黄色"
dxSBAR_COLOR_STR_12="蓝色"
dxSBAR_COLOR_STR_13="紫红色"
dxSBAR_COLOR_STR_14="浅绿色"
dxSBAR_COLOR_STR_15="白色"
dxSBAR_COLOR_STR_2="绿色"
dxSBAR_COLOR_STR_3="黄绿"
dxSBAR_COLOR_STR_4="深蓝"
dxSBAR_COLOR_STR_5="紫色"
dxSBAR_COLOR_STR_6="青色"
dxSBAR_COLOR_STR_7="灰色"
dxSBAR_COLOR_STR_8="银色"
dxSBAR_COLOR_STR_9="红色"
dxSBAR_COLORAUTOTEXT="(自动)"
dxSBAR_COLORCUSTOMTEXT="(自定义)"
dxSBAR_COMMANDNAMECANNOTBEBLANK="命令名称不能为空。请输入一个名称。"
dxSBAR_COMMANDS="命令(&D):"
dxSBAR_CP_ADDBUTTON="添加按钮(&B)"
dxSBAR_CP_ADDCXITEM="添加输入框(&C)"
dxSBAR_CP_ADDDXITEM="添加项目(&I)"
dxSBAR_CP_ADDGROUPBUTTON="添加分组按钮(&U)"
dxSBAR_CP_ADDLARGEBUTTON="添加大图标(&A)"
dxSBAR_CP_ADDSEPARATOR="添加分隔符(&S)"
dxSBAR_CP_ADDSUBITEM="添加子项目(&S)"
dxSBAR_CP_ALLVIEWLEVELS="所有"
dxSBAR_CP_BEGINAGROUP="开始分组(&G)"
dxSBAR_CP_BUTTONGROUP="分组"
dxSBAR_CP_BUTTONGROUPMENU="按钮分组(&R)"
dxSBAR_CP_BUTTONPAINTSTYLEMENU="按钮风格(&S)"
dxSBAR_CP_BUTTONUNGROUP="取消分组"
dxSBAR_CP_CAPTION="标题(&C):"
dxSBAR_CP_DEFAULTSTYLE="默认风格(&U)"
dxSBAR_CP_DELETE="删除(&D)"
dxSBAR_CP_DELETEITEM="删除项目"
dxSBAR_CP_DELETELINK="删除链接"
dxSBAR_CP_DISTRIBUTED="分布式(&T)"
dxSBAR_CP_IMAGEANDTEXT="图像和文本(&A)"
dxSBAR_CP_MOSTRECENTLYUSED="最近使用过的(&M)"
dxSBAR_CP_NAME="名称(&N):"
dxSBAR_CP_POSITIONMENU="位置(&P)"
dxSBAR_CP_RESET="重置(&R)"
dxSBAR_CP_SINGLEVIEWLEVELITEMSUFFIX=" 唯一"
dxSBAR_CP_TEXTONLYALWAYS="仅文本(总是)(&T)"
dxSBAR_CP_TEXTONLYINMENUS="仅文本(菜单中)(&O)"
dxSBAR_CP_VIEWLEVELSMENU="查看层(&L)"
dxSBAR_CP_VISIBLE="可见(&V)"
dxSBAR_CUSTOMIZE="自定义(&C)..."
dxSBAR_CUSTOMIZEQAT="自定义快速访问工具条"
dxSBAR_CUSTOMIZERIBBON="自定义功能区(&R)..."
dxSBAR_CUSTOMIZERIBBONQAT="自定义快速访问工具栏(&C)..."
dxSBAR_CUSTOMIZINGFORM="自定义窗口..."
dxSBAR_CXEDITVALUEDIALOGCAPTION="输入值"
dxSBAR_DATECLEAR="清除"
dxSBAR_DATEDIALOGCAPTION="选择日期"
dxSBAR_DATETODAY="今天"
dxSBAR_DBNAVERROR1="已经有一个相同的数据导航按钮了"
dxSBAR_DBNAVIGATORCATEGORYNAME="数据导航器"
dxSBAR_DEFAULTCATEGORYNAME="默认"
dxSBAR_DELETE="删除"
dxSBAR_DELETERECORD="是否要删除当前记录？"
dxSBAR_DESCRIPTION="说明  "
dxSBAR_DIALOGCANCEL="取消"
dxSBAR_DIALOGOK="确定"
dxSBAR_DRAGTOMAKEMENUFLOAT="拖动鼠标，使这个菜单浮动"
dxSBAR_EXPAND="展开(Ctrl+Down)"
dxSBAR_EXTRAPANEHEADER="最近打开的文档"
dxSBAR_GALLERYEMPTYFILTERCAPTION="<空>"
dxSBAR_GDIPLUSNEEDED="%s 需要安装 微软 GDI+ 连接库"
dxSBAR_HIDEALLGALLERYGROUPS="隐藏全部组"
dxSBAR_HINTOPT1="在工具栏显示工具提示(&T)"
dxSBAR_HINTOPT2="在工具提示中显示快捷键(&H)"
dxSBAR_IMAGEDIALOGCAPTION="选择项目"
dxSBAR_IMAGEINDEX="图片索引"
dxSBAR_IMAGETEXT="文本"
dxSBAR_INSERTEX="插入..."
dxSBAR_LARGEICONS="大图标(&L)"
dxSBAR_LOOKUPDIALOGCANCEL="取消"
dxSBAR_LOOKUPDIALOGCAPTION="选择值"
dxSBAR_LOOKUPDIALOGOK="确定"
dxSBAR_MDICLOSE="关闭窗口"
dxSBAR_MDIMINIMIZE="最小化窗口"
dxSBAR_MDIRESTORE="还原窗口"
dxSBAR_MENUANIM1="(无)"
dxSBAR_MENUANIM2="随机"
dxSBAR_MENUANIM3="折叠"
dxSBAR_MENUANIM4="滑动"
dxSBAR_MENUANIM5="淡入"
dxSBAR_MENUANIMATIONS="菜单动画(&M):"
dxSBAR_MENUSSHOWRECENTITEMS="菜单优先显示最近使用过的命令(&N)"
dxSBAR_MINIMIZERIBBON="最小化功能区(&N)"
dxSBAR_MODIFY="...修改"
dxSBAR_MOREBUTTONS="更多按钮"
dxSBAR_MORECOMMANDS="更多命令(&M)..."
dxSBAR_MOVEDOWN="下移"
dxSBAR_MOVEUP="上移"
dxSBAR_NEWBUTTONCAPTION="新建按钮"
dxSBAR_NEWITEMCAPTION="新建项"
dxSBAR_NEWRIBBONGALLERYITEMCAPTION="新建分类"
dxSBAR_NEWSEPARATORCAPTION="新建分隔符"
dxSBAR_NEWSUBITEMCAPTION="新建子项目"
dxSBAR_NOBARMANAGERS="没有有效的TdxBarManagers"
dxSBAR_OK="确定"
dxSBAR_ONEOFTOOLBARSALREADYMERGED="指定工具栏管理器已经合并"
dxSBAR_ONEOFTOOLBARSHASMERGEDTOOLBARS="指定工具栏管理器已经合并"
dxSBAR_OTHEROPTIONS="其他  "
dxSBAR_PERSMENUSANDTOOLBARS="个性化菜单和工具栏  "
dxSBAR_PIN="固定这个项到列表"
dxSBAR_PLACEFORCONTROL="转入的地方 "
dxSBAR_POPUPMENUEDITOR="弹出菜单编辑器..."
dxSBAR_QUICKACCESSALREADYHASGROUPBUTTON="快速访问工具条已经包含相同的工具条的分组按钮"
dxSBAR_QUICKACCESSGROUPBUTTONTOOLBARNOTDOCKEDINRIBBON="快速存取组按钮的工具条不能停靠在 Ribbon"
dxSBAR_RECURSIVEGROUPS="不能创建循环的分组"
dxSBAR_RECURSIVEMENUS="不能创建循环的菜单"
dxSBAR_REMOVEFROMQAT="从快速访问工具栏中删除(&R)"
dxSBAR_RENAMEEX="重命名..."
dxSBAR_RESETTOOLBAR="重置工具栏(&R)"
dxSBAR_RESETUSAGEDATA="重置我使用的数据(&R)"
dxSBAR_RIBBON_MINIMIZERIBBON="收缩功能区"
dxSBAR_RIBBON_PINRIBBON="固定功能区"
dxSBAR_RIBBON_RESTORERIBBON="展开功能区"
dxSBAR_RIBBONADDEMPTYGROUP="添加空分组"
dxSBAR_RIBBONADDGROUPWITHTOOLBAR="添加组和工具栏"
dxSBAR_RIBBONADDTAB="添加选项卡"
dxSBAR_RIBBONBADOWNER="%s 应将 TCustomForm 做为它的拥有者"
dxSBAR_RIBBONBADPARENT="%s 应将 TCustomForm 做为它的父组件"
dxSBAR_RIBBONCANTMERGE="不能合并指定的功能区"
dxSBAR_RIBBONCANTMERGETAB="不能合并指定的功能区页"
dxSBAR_RIBBONCANTMERGEWITHOUTBARMANAGER="不能合并功能区和指定非栏管理器"
dxSBAR_RIBBONCANTUNMERGE="不能拆分指定的功能区"
dxSBAR_RIBBONCANTUNMERGETAB="不能拆分指定的功能区页"
dxSBAR_RIBBONDELETEGROUP="删除分组"
dxSBAR_RIBBONDELETETAB="删除选项卡"
dxSBAR_RIBBONDISPLAYOPTIONS_AUTOHIDERIBBON_CAPTION="自动隐藏功能区"
dxSBAR_RIBBONDISPLAYOPTIONS_AUTOHIDERIBBON_DESCRIPTION="隐藏功能区后.单击应用程序顶部显示它."
dxSBAR_RIBBONDISPLAYOPTIONS_SHOWTABS_CAPTION="显示选项卡"
dxSBAR_RIBBONDISPLAYOPTIONS_SHOWTABS_DESCRIPTION="只显示功能区选项卡.单击一个选项卡显示命令."
dxSBAR_RIBBONDISPLAYOPTIONS_SHOWTABSANDCOMMANDS_CAPTION="显示选项卡和命令"
dxSBAR_RIBBONDISPLAYOPTIONS_SHOWTABSANDCOMMANDS_DESCRIPTION="总是显示功能区选项卡和命令."
dxSBAR_RIBBONFORM_CLOSE="关闭"
dxSBAR_RIBBONFORM_DISPLAYOPTIONS="功能区显示选项"
dxSBAR_RIBBONFORM_HELP="帮助"
dxSBAR_RIBBONFORM_MAXIMIZE="最大化"
dxSBAR_RIBBONFORM_MINIMIZE="最小化"
dxSBAR_RIBBONFORM_RESTOREDOWN="向下还原"
dxSBAR_RIBBONFORM_RESTOREUP="向上还原"
dxSBAR_RIBBONMORETHANONE="窗体中只能有一个%s实例"
dxSBAR_RIBBONONEOFTABGROUPSALREADYMERGED="一个指定的功能区页中的功能区页组已经合并"
dxSBAR_RIBBONSARENOTMERGED="功能区"%s"没有与功能区"%s"合并"
dxSBAR_RIBBONTABSARENOTMERGED="功能区页"%s"没有与功能区页"%s"合并"
dxSBAR_SHOWABOVERIBBON="显示快速访问工具栏上方功能区(&S)"
dxSBAR_SHOWALLGALLERYGROUPS="显示所有分组"
dxSBAR_SHOWBELOWRIBBON="显示在功能区下方快速访问工具栏(&S)"
dxSBAR_SHOWFULLMENUSAFTERDELAY="短延迟后显示全部菜单(&U)"
dxSBAR_SUBMENUEDITOR="子菜单编辑器..."
dxSBAR_SUBMENUEDITORCAPTION="ExpressBars子菜单编辑器"
dxSBAR_TABSHEET1=" 工具条 "
dxSBAR_TABSHEET2=" 命令 "
dxSBAR_TABSHEET3=" 选项 "
dxSBAR_TDELETE="删除(&D)"
dxSBAR_TNEW="新建(&N)..."
dxSBAR_TOOLBARADD="添加工具栏"
dxSBAR_TOOLBAREXISTS="工具栏"%s"已存在。输入其他名称。"
dxSBAR_TOOLBARHASMERGEDTOOLBARS="工具栏"%s"已合并到工具栏中"
dxSBAR_TOOLBARNAME="工具条名称(&T):"
dxSBAR_TOOLBARNEWNAME="自定义 "
dxSBAR_TOOLBARRENAME="重命名工具栏"
dxSBAR_TOOLBARS="工具栏(&A):"
dxSBAR_TOOLBARSALREADYMERGED="工具栏"%s"已经合并在工具栏"%s"中了"
dxSBAR_TOOLBARSARENOTMERGED="工具栏"%s"没有与工具栏"%s"合并"
dxSBAR_TREEVIEWDIALOGCAPTION="选择项目"
dxSBAR_TRENAME="重命名(&E)..."
dxSBAR_TRESET="重置(&R)..."
dxSBAR_UNPIN="从列表中取消项的固定"
dxSBAR_VISIBLE="可见"
dxSBAR_WANTTOCLEARCOMMANDS="是否删除"%s"分类中的所有命令？"
dxSBAR_WANTTODELETECATEGORY="是否删除"%s"分类？"
dxSBAR_WANTTODELETECOMPLEXITEM="已选定对象其中含有多个链接的项目。请确认是否删除这些链接？"
dxSBAR_WANTTODELETETOOLBAR="是否删除"%s"工具栏？"
dxSBAR_WANTTODELETETOOLBARS="是否删除选择的工具栏？"
dxSBAR_WANTTORESETTOOLBAR="是否重置工具栏"%s"？"
dxSBAR_WANTTORESETUSAGEDATA="本操作将删除此应用程序中使用过的命令，将默认的命令还原到菜单和工具栏中。它不会撤消任何显式自定义。确定要继续吗？"
dxTileControlDefaultGroupCaptionHint="名称分组"
dxTreeViewDelConfirm="是否删除项目"%s""
SBlob="(二进制对象)"
scxActionClose="关闭"
scxActionRecurrence="重复"
scxActualFinishField="实际完成"
scxActualStartField="实际开始"
scxAdd="添加(&A)"
scxAdd1="添加"
scxAdd1Hint="添加(Ins)"
scxAddedHolidayDisplayFormat="%s - %s (%s)"
scxAddedHolidaysGroupBox="已添加的节假日"
scxAddTo="添加到"
scxAdvance0h="离开始还有1小时"
scxAdvance10m="离开始还有10分钟"
scxAdvance15m="离开始还有15分钟"
scxAdvance5m="离开始还有5分钟"
scxAdvancedCustomizationFormBottomPanelOnly1by4="仅区域部分 (1 by 4)"
scxAdvancedCustomizationFormBottomPanelOnly2by2="仅区域部分 (2 by 2)"
scxAdvancedCustomizationFormColumnAreaCaption="列区域"
scxAdvancedCustomizationFormDataAreaCaption="数据区域"
scxAdvancedCustomizationFormFieldsCaption="在下面的区域之间拖动字段:"
scxAdvancedCustomizationFormFilterAreaCaption="过滤区域"
scxAdvancedCustomizationFormMainCaption="将字段拖到数据透视表格"
scxAdvancedCustomizationFormRowAreaCaption="行区域"
scxAdvancedCustomizationFormStackedDefault="字段和区域部分层叠"
scxAdvancedCustomizationFormStackedSideBySide="字段和区域部分并排"
scxAdvancedCustomizationFormTopPanelOnly="仅字段部分"
scxAllDayEvent="全天事件(&A)"
scxAllDayEventField="全天事件"
scxAnalysisServer="分析服务器"
scxApply="应用(&A)"
scxBands="带区..."
scxBandsCaption="    带区    "
scxBoolFalse="False"
scxBoolTrue="True"
scxBuiltInLookAndFeelStyles="内置样式"
scxBusy="忙"
scxCaclulatorConstructFormula="错误构建的公式。解析表达错误偏移量在"
scxCaclulatorCyclingError="计算错误。公式并重新打开当前索引"
scxCaclulatorDivByZero="不能被零除!"
scxCaclulatorErrorString="错误-未终止的字符串！"
scxCaclulatorErrorSymbol="错误 - symbol ')' expected!"
scxCaclulatorFuncInvalidIndex="无效的函数索引"
scxCaclulatorFuncInvalidName="错误的函数名"
scxCaclulatorFuncNeedResult="函数需要返回值"
scxCaclulatorMissingParamters="丢失堆参数"
scxCaclulatorMissingTokens="缺少标记"
scxCaclulatorParseFormula="解析公式在字符串的位置时出错"
scxCaclulatorStringExpression="字符串表达式中的语法错误"
scxCaclulatorTypeErr="不兼容的操作类型！"
scxCaclulatorUnknownExpression="未知的字符串表达式"
scxCaclulatorUnknownToken="在表达式中的未知标记"
scxCancel="取消(&C)"
scxCannotRescheduleOccurrence="无法重新安排定期约会"%s"的发生，如果它跳过了同一约会以后发生。"
scxCantCreateExportOutputFile="不能创建导出到文件"
scxCantCreateRegistryKey="不能创建注册表键: \%s"
scxCantOpenRegistryKey="不能打开注册表键: \%s"
scxCaptionField="标题"
scxChangeCellsData="改变单元格"
scxChangeCellsStyle="格式化单元格"
scxChangeDeleteCells="删除单元格"
scxChangeInsertCells="插入单元格"
scxChangePartOfMergeCells="不能更改合并单元格的部分"
scxClearAllAction="清除所有"
scxClearCells="清除所有单元格"
scxClose="关闭(&C)"
scxCollapse="折叠"
scxCollapseAll="全部折叠"
scxColorBoxAutomatic="自动"
scxColorBoxNone="无"
scxColorEditorCaption="颜色编辑器"
scxColumnArea="列区域"
scxColumns="列..."
scxColumnsCaption="   列   "
scxComplete="完成"
scxCompleteDisplayFormat="0 %"
scxConfirmLostExceptions="与此定期事件相关联的任何例外将会丢失。确定吗？"
scxConnectUsing="连接使用"
scxConverterCantCreateStyleRepository="无法创建样式库"
scxCreateAllItems="创建全部列"
scxCube="Cube"
scxCubeFile="Cube 文件"
scxCurrencyStyleDescription="货币格式用于一般的货币金额。"
scxCustom="自定义事件"
scxCustomizeCaption="自定义"
scxCutCommand="剪切单元格"
scxDaily="日(&D)"
scxDataArea="数据区域"
scxDatabase="数据库"
scxDataField="数据"
scxDataStorageErrorReadCellRecord="读取单元格记录错误"
scxDataStorageErrorSetCellRecord="设置单元格记录错误"
scxDate="日期(&D)："
scxDateTimeStyleDescription="日期/时间 格式用于作为 日期/时间 值的日期和时间的序列数字。"
scxDay="天(&A)"
scxDay1="天"
scxDayCalendar="日历"
scxDays="天"
scxDefaultSheetCaption="Sheet"
scxDeferLayoutUpdate="推迟布局更新"
scxDeferred="推迟"
scxDelete="删除(&D)"
scxDelete1="删除"
scxDelete1Hint="删除 (Del)"
scxDeleteAllItems="删除全部列"
scxDeleteConfirmation="项目已改变，确定要删除吗？"
scxDeleteRecurringEventDescription="是重复事件。您希望仅删除本次或所有的事件？"
scxDeleteTypeDialogCaption="确认删除"
scxDeleteTypeOccurrenceLabel="删除本次"
scxDeleteTypeSeriesLabel="删除序列"
scxDesignerCaption="TreeList设计器编辑 - "
scxDown="下(&D)"
scxDragItems="拖动项目到 PivotGrid"
scxDropColumnFields="将列字段拖至此处"
scxDropDataItems="将数据字段拖至此处"
scxDropFilterFields="将过滤字段拖至此处"
scxDropRowFields="将行字段拖至此处"
scxDuration="持续时间(&U):"
scxEdit="编辑(&E)"
scxEdit1="修改"
scxEditDotted="编辑..."
scxEditRecurringEventDescription="是重复事件。您希望仅打开本次或所有的事件？"
scxEditTypeDialogCaption="打开重复项目"
scxEditTypeOccurrenceLabel="打开事件"
scxEditTypeSeriesLabel="打开序列"
scxEmptyExportCache="导出缓存为空"
scxEnabledField="启用"
scxEnd="结束(&E):"
scxEndAfter="重复(&F):"
scxEndBy="结束(&B):"
scxEndTime="结束时间(&E):"
scxErrorStoreObject="错误的存储%s对象"
scxEvent="事件"
scxEventLabel0="重要"
scxEventLabel1="商业"
scxEventLabel2="个人"
scxEventLabel3="休假"
scxEventLabel4="必须参加"
scxEventLabel5="必须转发"
scxEventLabel6="务必准备"
scxEventLabel7="生日"
scxEventLabel8="纪念"
scxEventLabel9="电话"
scxEventLabelNone="无"
scxEventsConflict="与另一个在您的日程里安排的事件冲突。"
scxEventTime=" 事件时间 "
scxEventTypeField="类型"
scxEvery="每(&V)"
scxEveryWeekDay="每周(&K)"
scxExcelImportUndefinedString="共享的字符串表中未定义的字符串！"
scxException="例外事件"
scxExceptionEvent="例外事件"
scxExitConfirmation="保存修改吗？"
scxExpand="展开"
scxExpandAll="全部展开"
scxExport="导出(&E)"
scxExportHint="导出"
scxExportNotVisibleControl="组件必须显示输出"
scxExportToCSV="导出逗号分隔文本(*.csv)"
scxExportToExcel="导出电子表格Excel(*.xls)"
scxExportToHtml="导出网页(*.html)"
scxExportToText="导出文本文件(*.txt)"
scxExportToXlsx="导出MS Excel 2007 (*.xlsx)格式"
scxExportToXml="导出XML文档(*.xml)"
scxFieldListCaption="PivotGrid 字段列表"
scxFieldNotADataField="字段必须在数据区域中！"
scxFile="文件"
scxFilterArea="过滤区域"
scxFindAvailableTime="查找空闲时间"
scxFinishField="完成"
scxFinishToFinish="完成至完成"
scxFinishToFinishLong="完成至完成 (FF)"
scxFinishToFinishShort="FF"
scxFinishToStart="完成至开始"
scxFinishToStartLong="完成至开始 (FS)"
scxFinishToStartShort="FS"
scxFirst="第一"
scxFirstButtonHint="第一个资源"
scxFormApply="应用"
scxFormatCellStyle="单元格样式"
scxFormatCellStyleType="样式类型"
scxFormatDialogAllBorder="所有边框"
scxFormatDialogBorder="边框(&B)"
scxFormatDialogBottom="下"
scxFormatDialogCellShading="单元格底纹"
scxFormatDialogCenter="居中"
scxFormatDialogColor="颜色(&C)"
scxFormatDialogFill="填充"
scxFormatDialogFont="字体(&F)"
scxFormatDialogFormatCaption="格式化单元格"
scxFormatDialogGeneral="常规"
scxFormatDialogHorzAlign="水平(&H)"
scxFormatDialogInside="内(&I)"
scxFormatDialogItems="项目"
scxFormatDialogJustify="合适"
scxFormatDialogLeft="左"
scxFormatDialogLine="行"
scxFormatDialogNone="无(&N)"
scxFormatDialogNone2="无"
scxFormatDialogOutline="大纲(&I)"
scxFormatDialogPattern="模式(&P):"
scxFormatDialogPatterns="模式(&P)"
scxFormatDialogRight="右"
scxFormatDialogSample="示例"
scxFormatDialogSampleText="快速的棕色狐狸跳过了那条懒狗"
scxFormatDialogStyle="样式(&S)"
scxFormatDialogText="对齐(&A)"
scxFormatDialogTextAlignment="文本对齐"
scxFormatDialogTextControl="文本控制"
scxFormatDialogTextStr="文本"
scxFormatDialogTop="上"
scxFormatDialogVertAlign="垂直(&V)"
scxFormatDialogWrap="自动换行(&W)"
scxFormatStyleCurrency="货币(&C)"
scxFormatStyleDateTime="日期/时间(&D)"
scxFormatStyleGeneral="常规(&G)"
scxFormatStyleNumber="数字(&N)"
scxFormatStyleStyleSettings="样式设置"
scxFormatStyleText="文本(&T)"
scxFormCancel="否"
scxFormOk="是"
scxFourth="第四"
scxFree="释放"
scxFrom="自:"
scxFullYear="全年"
scxGanttEventHint="任务: %s \n完成: %d %% \n开始: % \n完成: %s"
scxGdipInvalidOperation="GDI+中的操作无效 (代码: %d)"
scxGdipInvalidOperationWin32Error="在GDI+中的操作无效 (Win32错误代码: %d)"
scxGeneralStyleDescription="设置单元格格式一般没有任何特殊格式。"
scxGoToDateDialogCaption="转到日期"
scxGrandTotal="总计"
scxGridBandsQuickCustomizationHint="点此显示/隐藏/移动 带区"
scxGridChartAlignment="排列"
scxGridChartAlignmentCenter="居中"
scxGridChartAlignmentDefault="默认"
scxGridChartAlignmentEnd="结束"
scxGridChartAlignmentStart="开始"
scxGridChartAreaDiagramDisplayText="面积图表"
scxGridChartBarDiagramDisplayText="柱形图表"
scxGridChartBorder="边框"
scxGridChartCategoriesDisplayText="数据"
scxGridChartColumnDiagramDisplayText="直方图"
scxGridChartCustomizationFormDataGroupsPageCaption="数据组"
scxGridChartCustomizationFormNoSortedSeries="<空系列>"
scxGridChartCustomizationFormOptionsPageCaption="选项"
scxGridChartCustomizationFormSeriesPageCaption="系列"
scxGridChartCustomizationFormSortBySeries="排序:"
scxGridChartDiagramSelector="选择图表"
scxGridChartLegend="图例"
scxGridChartLegendKeyBorder="主边框"
scxGridChartLineDiagramDisplayText="线图表"
scxGridChartNoneDiagramDisplayText="无图表"
scxGridChartOrientation="方向"
scxGridChartOrientationDefault="默认"
scxGridChartOrientationHorizontal="水平"
scxGridChartOrientationVertical="垂直"
scxGridChartOther="其它"
scxGridChartPercentValueTickMarkLabelFormat="0%"
scxGridChartPieDiagramDisplayText="圆形图"
scxGridChartPosition="位置"
scxGridChartPositionBottom="下"
scxGridChartPositionDefault="默认"
scxGridChartPositionLeft="左"
scxGridChartPositionNone="无"
scxGridChartPositionRight="右"
scxGridChartPositionTop="上"
scxGridChartStackedAreaDiagramDisplayText="层叠区域图"
scxGridChartStackedBarDiagramDisplayText="层叠条形图"
scxGridChartStackedColumnDiagramDisplayText="层叠条形图"
scxGridChartTitle="标题"
scxGridChartToolBox="工具箱"
scxGridChartToolBoxCustomizeButtonCaption="自定义图表"
scxGridChartToolBoxDataLevels="数据层:"
scxGridChartToolBoxDataLevelSelectValue="选择值"
scxGridChartValueHintFormat="%s 对 %s 是 %s"
scxGridChartValueHints="提示值"
scxGridColumnsQuickCustomizationHint="点此 显示/隐藏/移动 列"
scxGridConverterIntermediaryMissing="缺少中介组件！请将 %s 组件添加到窗体。"
scxGridConverterNotExistComponent="控件不存在"
scxGridConverterNotExistGrid="cxGrid 不存在"
scxGridCustomizationFormBandsPageCaption="带区"
scxGridCustomizationFormCaption="自定义"
scxGridCustomizationFormColumnsPageCaption="列"
scxGridCustomizationFormRowsPageCaption="行"
scxGridDataRowFixingPopupCommandFixToBottom="固定底"
scxGridDataRowFixingPopupCommandFixToTop="固定顶"
scxGridDeletingConfirmationCaption="确定"
scxGridDeletingFocusedConfirmationText="删除记录?"
scxGridDeletingSelectedConfirmationText="删除所有选择的记录？"
scxGridFilterApplyButtonCaption="应用过滤器"
scxGridFilterCustomizeButtonCaption="自定义..."
scxGridFilterIsEmpty="<过滤为空>"
scxGridFilterRowInfoText="点此定义一个筛选"
scxGridFindPanelClearButtonCaption="清除"
scxGridFindPanelFindButtonCaption="查找"
scxGridFindPanelInfoText="输入要搜索的内容..."
scxGridFuture="将来"
scxGridGroupByBoxCaption="拖曳栏标题这里组合该栏"
scxGridInplaceEditFormButtonCancel="取消"
scxGridInplaceEditFormButtonClose="关闭"
scxGridInplaceEditFormButtonUpdate="更新"
scxGridInplaceEditFormSaveChangesQuery="数据已改变，是否保存?"
scxGridLast14Days="14天前"
scxGridLast30Days="30天前"
scxGridLast7Days="7天前"
scxGridLastMonth="上个月"
scxGridLastTwoWeeks="两周前"
scxGridLastWeek="上周"
scxGridLastYear="去年"
scxGridLayoutViewCustomizeFormApply="应用"
scxGridLayoutViewCustomizeFormCancel="取消"
scxGridLayoutViewCustomizeFormOk="确定"
scxGridLayoutViewCustomizeFormTemplateCard="模板卡"
scxGridLayoutViewCustomizeFormViewLayout="视图布局"
scxGridLayoutViewCustomizeLayoutButtonCaption="布局编辑器"
scxGridLayoutViewCustomizeWarningDialogCaption="警告"
scxGridLayoutViewCustomizeWarningDialogMessage="已更改布局。是否要保存更改？"
scxGridLayoutViewRecordCaptionDefaultMask="第[RecordIndex]条,共[RecordCount]条]"
scxGridLockedStateImageText="请稍候..."
scxGridMonthFormat="mmmm yyyy"
scxGridNewItemRowInfoText="点击添加新行"
scxGridNext14Days="14天后"
scxGridNext30Days="30天后"
scxGridNext7Days="7天后"
scxGridNextMonth="下个月"
scxGridNextTwoWeeks="两周后"
scxGridNextWeek="下一周"
scxGridNextYear="下一年"
scxGridNoDataInfoText="<无可显示的数据>"
scxGridPast="过去"
scxGridRecursiveLevels="不能创建递归层"
scxGridThisMonth="本月"
scxGridThisWeek="本周"
scxGridThisYear="今年"
scxGridToday="今天"
scxGridTomorrow="明天"
scxGridWizardChartViewOptionsViewSettingsPageDescription="ChartViewOptionsViewSettingsPage的描述"
scxGridWizardChartViewOptionsViewSettingsPageTitle="视图设置"
scxGridWizardOptionCaptionAntialiasing="抗锯齿"
scxGridWizardOptionCaptionCustomizationOptions="自定义选项"
scxGridWizardOptionCaptionDataDrillDown="数据向下钻取"
scxGridWizardOptionCaptionDataGroupHiding="数据组隐藏"
scxGridWizardOptionCaptionDataGroupMoving="移动数据组"
scxGridWizardOptionCaptionDataGroupOptions="数据组选项"
scxGridWizardOptionCaptionOptionsCustomization="自定义选项"
scxGridWizardOptionCaptionSeriesCustomization="自定义序列"
scxGridWizardOptionCaptionToolBoxCustomizeButton="自定义按钮"
scxGridWizardOptionCaptionTransparentCaption="标题透明"
scxGridYearFormat="yyyy"
scxGridYesterday="昨天"
scxGroupAverage="%s 平均值"
scxGroupCount="%s 计数值"
scxGroupCustom="%s 自定义"
scxGroupIDField="分组编号"
scxGroupMax="%s 最大值"
scxGroupMin="%s 最小值"
scxGroupStdDev="%s 标准偏差值"
scxGroupStdDevP="%s 总体标准偏差"
scxGroupSum="%s 小计"
scxGroupTotal="%s 总计"
scxGroupVariance="%s 变量"
scxGroupVarianceP="%s 变量指针"
scxgsUnboundsSelectColumnsForDisplayPageInputQueryCaptionAdd="添加列"
scxgsUnboundsSelectColumnsForDisplayPageInputQueryCaptionEdit="修改列"
scxgsUnboundsSelectItemsForDisplayPageInputQueryCaptionAdd="添加项目"
scxgsUnboundsSelectItemsForDisplayPageInputQueryCaptionEdit="编辑项目"
scxgsUnboundsSelectRowsForDisplayPageInputQueryCaptionAdd="添加行"
scxgsUnboundsSelectRowsForDisplayPageInputQueryCaptionEdit="修改行"
scxgwBandsPageDescription="创建栏、名称，并指定它们的顺序"
scxgwBandsPageInputQueryCaptionAdd="添加栏"
scxgwBandsPageInputQueryCaptionEdit="修改栏"
scxgwBandsPageTitle="带区"
scxgwBehaviorPageCardViewCardExpanding="展开卡片"
scxgwBehaviorPageCardViewCardExpandingHint=""
scxgwBehaviorPageCardViewExpandRowOnDblClick="双击展开行"
scxgwBehaviorPageCardViewExpandRowOnDblClickHint=""
scxgwBehaviorPageCardViewRowExpanding="展开行"
scxgwBehaviorPageCardViewRowExpandingHint=""
scxgwBehaviorPageCardViewRowHiding="隐藏行"
scxgwBehaviorPageCardViewRowHidingHint=""
scxgwBehaviorPageCardViewRowMoving="移动行"
scxgwBehaviorPageCardViewRowMovingHint=""
scxgwBehaviorPageCardViewRowOptions="行选项"
scxgwBehaviorPageCellMultiSelect="单元格多选"
scxgwBehaviorPageCellMultiSelectHint=""
scxgwBehaviorPageCellSelect="单元格选择"
scxgwBehaviorPageCellSelectHint=""
scxgwBehaviorPageDescription="自定义表格视图行为"
scxgwBehaviorPageExpandingOptions="展开选项"
scxgwBehaviorPageExpandRecordOnDblClick="双击展开记录"
scxgwBehaviorPageExpandRecordOnDblClickHint=""
scxgwBehaviorPageFocusCellOnCycle="焦点在单元格上循环"
scxgwBehaviorPageFocusCellOnCycleHint=""
scxgwBehaviorPageFocusCellOnTab="在单元格上使用Tab键移动焦点"
scxgwBehaviorPageFocusCellOnTabHint=""
scxgwBehaviorPageFocusFirstCellOnNewRecord="设置焦点在新记录的第一个单元格上"
scxgwBehaviorPageFocusFirstCellOnNewRecordHint=""
scxgwBehaviorPageFocusingOptions="焦点选项"
scxgwBehaviorPageGoToNextCellOnEnter="回车转到下一个单元格"
scxgwBehaviorPageGoToNextCellOnEnterHint=""
scxgwBehaviorPageGridLines="网格线"
scxgwBehaviorPageGridLinesHorizontal="水平"
scxgwBehaviorPageGridLinesHorizontalHint=""
scxgwBehaviorPageGridLinesVertical="垂直"
scxgwBehaviorPageGridLinesVerticalHint=""
scxgwBehaviorPageGroupExpanding="分组展开"
scxgwBehaviorPageGroupExpandingHint=""
scxgwBehaviorPageHideSelection="隐藏选择"
scxgwBehaviorPageHideSelectionHint=""
scxgwBehaviorPageItemHotTrack="热跟踪"
scxgwBehaviorPageItemHotTrackHint=""
scxgwBehaviorPageRecordExpanding="记录展开"
scxgwBehaviorPageRecordExpandingHint=""
scxgwBehaviorPageRecordMultiSelect="记录多选"
scxgwBehaviorPageRecordMultiSelectHint=""
scxgwBehaviorPageRowMultiSelect="行多选"
scxgwBehaviorPageRowMultiSelectHint=""
scxgwBehaviorPageSelectionOptions="选择选项"
scxgwBehaviorPageTitle="行为"
scxgwCardViewTreeViewFrameAddCaptionRow="添加行标题(&P)"
scxgwCardViewTreeViewFrameAddCaptionRowHint="添加行标题(Alt+P)"
scxgwCardViewTreeViewFrameAddCategoryRow="添加行分类(&T)"
scxgwCardViewTreeViewFrameAddCategoryRowHint="添加行分类(Alt+T)"
scxgwCardViewTreeViewFrameDefaultCaptionRowCaption="标题"
scxgwCardViewTreeViewFrameDefaultCategoryRowCaption="分类"
scxgwCardViewTreeViewFrameEditRow="修改行(&E)"
scxgwCardViewTreeViewFrameEditRowHint="修改行(Alt+E)"
scxgwCardViewTreeViewFrameInputQueryCaptionAddCaptionRow="添加行标题"
scxgwCardViewTreeViewFrameInputQueryCaptionAddCategoryRow="添加行分类"
scxgwCardViewTreeViewFrameInputQueryCaptionEditRow="修改行"
scxgwCommonAdd="添加(&A)"
scxgwCommonAddAll="添加所有(&L)"
scxgwCommonAddSelected="添加已选(&S)"
scxgwCommonCancel="取消(&C)"
scxgwCommonCaptionPrompt="标题:"
scxgwCommonCheckSelected="检查已选"
scxgwCommonCloseQuery="您将要终止DevExpress表格配置向导.\r\\n如果关闭本向导，所有表格配置信息将丢失，是否继续?""
scxgwCommonCreateDetailLevelQuery="是否创建一个新的详细视图?"
scxgwCommonDataSource="数据源:"
scxgwCommonDataSourceHint=""  //todo:"
scxgwCommonDeleteAll="全部删除(&E)"
scxgwCommonDeleteSelected="删除(&D)"
scxgwCommonDeselectAll="取消选择"
scxgwCommonEdit="编辑(&I)"
scxgwCommonGroupCaptionCommon="常规"
scxgwCommonGroupCaptionOthers="其它"
scxgwCommonKeyFields="关键字段:"
scxgwCommonKeyFieldsHint=""
scxgwCommonKind="种类:"
scxgwCommonMoveDown="下移(&W)"
scxgwCommonMoveSelectedDown="下移选择内容"
scxgwCommonMoveSelectedUp="上移选择内容"
scxgwCommonMoveUp="上移(&U)"
scxgwCommonNoneSelected="<没有选择任何内容>"
scxgwCommonOK="确定(&O)"
scxgwCommonProperties="属性:"
scxgwCommonSelectAll="全选"
scxgwCommonUncheckSelected="取消选择"
scxgwCommonWizardCaption="表格向导"
scxgwCommonWizardCaptionEditing="表格向导-%s"
scxgwCustomizationFormBandsTab="隐藏栏"
scxgwCustomizationFormCardTreeViewTab="卡片树视图"
scxgwCustomizationFormColumnsTab="隐藏列"
scxgwCustomizationFormRowsTab="隐藏行"
scxgwCustomizeItemsPageDescriptionDB="为您的界面元素提供的最方便的布局"
scxgwCustomizeItemsPageDescriptionUnbound=""
scxgwCustomizeItemsPageTitleDB="自定义布局"
scxgwCustomizeItemsPageTitleUnbound="自定义布局和数据"
scxgwDataSettingsPageDescription="为您的数据选择最合适的设置"
scxgwDataSettingsPageGridMode="表格模式"
scxgwDataSettingsPageGridModeBufferCount="表格模式缓存数"
scxgwDataSettingsPageMultiThreadedOptionsFiltering="多线程过滤"
scxgwDataSettingsPageMultiThreadedOptionsSorting="多线程排序"
scxgwDataSettingsPageSmartRefresh="智能刷新"
scxgwDataSettingsPageSmartRefreshHint=""
scxgwDataSettingsPageSynchronization="详细视图同步"
scxgwDataSettingsPageSynchronizationHint=""
scxgwDataSettingsPageSyncMode="同步模式"
scxgwDataSettingsPageSyncModeHint=""
scxgwDataSettingsPageTitle="数据处理中"
scxgwDataSourcePageDescription="指定一个数据源并配置它. 请确保您的数据源链接到数据集""
scxgwDataSourcePageDetailKeyFieldNames="详细关键字段: "
scxgwDataSourcePageDetailKeyFieldNamesHint=""
scxgwDataSourcePageIsDetailView="是详细视图"
scxgwDataSourcePageMasterView="主视图"
scxgwDataSourcePageMasterViewHint=""
scxgwDataSourcePageMasterViewKeyFieldNames="主关键字段: "
scxgwDataSourcePageMasterViewKeyFieldNamesHint=""
scxgwDataSourcePageTitle="数据源"
scxgwFilteringSortingPageColumnFiltering="列过滤"
scxgwFilteringSortingPageColumnFilteringHint=""
scxgwFilteringSortingPageColumnSorting="列排序"
scxgwFilteringSortingPageColumnSortingHint=""
scxgwFilteringSortingPageDescription="为过滤和排序指定功能和元素"
scxgwFilteringSortingPageFilterBoxVisible="过滤器可见"
scxgwFilteringSortingPageFilterBoxVisibleAlways="总是"
scxgwFilteringSortingPageFilterBoxVisibleAlwaysHint=""
scxgwFilteringSortingPageFilterBoxVisibleHint=""
scxgwFilteringSortingPageFilterBoxVisibleNonEmpty="当应用过滤时"
scxgwFilteringSortingPageFilterBoxVisibleNonEmptyHint=""
scxgwFilteringSortingPageHeaderFilterButtonShowMode="过滤器按钮显示模式"
scxgwFilteringSortingPageHeaderFilterButtonShowModeButton="按钮"
scxgwFilteringSortingPageHeaderFilterButtonShowModeButtonHint=""
scxgwFilteringSortingPageHeaderFilterButtonShowModeHint=""
scxgwFilteringSortingPageHeaderFilterButtonShowModeSmartTag="智能标记"
scxgwFilteringSortingPageHeaderFilterButtonShowModeSmartTagHint=""
scxgwFilteringSortingPageIncSearch="增量搜索"
scxgwFilteringSortingPageIncSearchHint=""
scxgwFilteringSortingPageShowColumnFilterButton="过滤器按钮可见"
scxgwFilteringSortingPageShowColumnFilterButtonAlways="总是"
scxgwFilteringSortingPageShowColumnFilterButtonAlwaysHint=""
scxgwFilteringSortingPageShowColumnFilterButtonWhenSelected="在选择时"
scxgwFilteringSortingPageShowColumnFilterButtonWhenSelectedHint=""
scxgwFilteringSortingPageTitle="过滤和排序"
scxgwFinishPageDescription="这是您自定义的表格视图。如果你需要去做一些修改, \r\\n使用后退按钮，否则请单击完成以保存所做的更改""
scxgwFinishPageTitle="完成"
scxgwInplaceEditFormLayoutPageDescription="自定义编辑窗体的布局"
scxgwInplaceEditFormLayoutPageTitle="原地编辑窗体布局"
scxgwInplaceEditFormPageClient="客户区"  //todo:"
scxgwInplaceEditFormPageClientHint=""  //todo:"
scxgwInplaceEditFormPageDefaultColumnCount="列数"
scxgwInplaceEditFormPageDefaultColumnCountHint="窗体编辑器被安排在指定的列数"
scxgwInplaceEditFormPageDefaultStretch="窗体缩放"
scxgwInplaceEditFormPageDescription="配置原地编辑器窗体"
scxgwInplaceEditFormPageHorizontal="水平"  //todo:"
scxgwInplaceEditFormPageHorizontalHint=""  //todo:"
scxgwInplaceEditFormPageMasterRowDblClickAction="双击激活主行"
scxgwInplaceEditFormPageNone="无"  //todo:"
scxgwInplaceEditFormPageNoneHint=""  //todo:"
scxgwInplaceEditFormPageShowEditForm="显示编辑窗体"
scxgwInplaceEditFormPageShowEditFormHint=""  //todo:"
scxgwInplaceEditFormPageSwitchExpandedState="切换展开状态"
scxgwInplaceEditFormPageSwitchExpandedStateHint=""  //todo:"
scxgwInplaceEditFormPageTitle="原地编辑器设置"
scxgwInplaceEditFormPageUseDefaultLayout="使用默认布局"
scxgwInplaceEditFormPageUseDefaultLayoutHint="使用自动生成的布局内编辑窗体, 或自定义它"
scxgwInplaceEditFormPageVertical="垂直"  //todo:"
scxgwInplaceEditFormPageVerticalHint=""  //todo:"
scxgwLayoutViewCarouselAngleOptions="角度选项"
scxgwLayoutViewCarouselAnimationInterval="动画间隔:"
scxgwLayoutViewCarouselAnimationIntervalHint=""
scxgwLayoutViewCarouselAutoPitchAngle="自动"
scxgwLayoutViewCarouselAutoPitchAngleHint=""
scxgwLayoutViewCarouselBackgroundRecordAlphaLevel="透明度:"
scxgwLayoutViewCarouselBackgroundRecordAlphaLevelHint=""
scxgwLayoutViewCarouselBackgroundRecordEndScale="结束比例:"
scxgwLayoutViewCarouselBackgroundRecordEndScaleHint=""
scxgwLayoutViewCarouselBackgroundRecordOptions="背景记录选项"
scxgwLayoutViewCarouselBackgroundRecordStartScale="开始比例:"
scxgwLayoutViewCarouselBackgroundRecordStartScaleHint=""
scxgwLayoutViewCarouselPageDescription="配置旋转模式"
scxgwLayoutViewCarouselPageTitle="旋转模式"
scxgwLayoutViewCarouselPitchAngle="倾斜角度"
scxgwLayoutViewCarouselPitchAngleHint=""
scxgwLayoutViewCarouselRadius="半径:"
scxgwLayoutViewCarouselRadiusHint=""
scxgwLayoutViewCarouselRecordCount="记录数量:"
scxgwLayoutViewCarouselRecordCountHint=""
scxgwLayoutViewCarouselRollAngle="转动角度"
scxgwLayoutViewCarouselRollAngleHint=""
scxgwLayoutViewCustomizeItemsPageDescription="为你选择最适当的布局"
scxgwLayoutViewCustomizeItemsPageTitle="自定义项目"
scxgwLayoutViewOptionsViewPageCenterRecords="卡片居中"
scxgwLayoutViewOptionsViewPageCenterRecordsHint=""
scxgwLayoutViewOptionsViewPageDescription="指定怎么进行卡片的排列和缩放"
scxgwLayoutViewOptionsViewPageSingleRecordStretch="卡片缩放"
scxgwLayoutViewOptionsViewPageSingleRecordStretchClient="客户区"
scxgwLayoutViewOptionsViewPageSingleRecordStretchClientHint=""
scxgwLayoutViewOptionsViewPageSingleRecordStretchHint=""
scxgwLayoutViewOptionsViewPageSingleRecordStretchHorizontal="水平"
scxgwLayoutViewOptionsViewPageSingleRecordStretchHorizontalHint=""
scxgwLayoutViewOptionsViewPageSingleRecordStretchNone="无"
scxgwLayoutViewOptionsViewPageSingleRecordStretchNoneHint=""
scxgwLayoutViewOptionsViewPageSingleRecordStretchVertical="垂直"
scxgwLayoutViewOptionsViewPageSingleRecordStretchVerticalHint=""
scxgwLayoutViewOptionsViewPageTitle="视图"
scxgwLayoutViewOptionsViewPageViewMode="视图模式"
scxgwLayoutViewOptionsViewPageViewModeCarousel="旋转"
scxgwLayoutViewOptionsViewPageViewModeCarouselHint=""
scxgwLayoutViewOptionsViewPageViewModeHint="指定卡片显示模式"
scxgwLayoutViewOptionsViewPageViewModeMultiColumn="多列"
scxgwLayoutViewOptionsViewPageViewModeMultiColumnHint=""
scxgwLayoutViewOptionsViewPageViewModeMultiRow="多行"
scxgwLayoutViewOptionsViewPageViewModeMultiRowHint=""
scxgwLayoutViewOptionsViewPageViewModeSingleColumn="单列"
scxgwLayoutViewOptionsViewPageViewModeSingleColumnHint=""
scxgwLayoutViewOptionsViewPageViewModeSingleRecord="单一卡片"
scxgwLayoutViewOptionsViewPageViewModeSingleRecordHint=""
scxgwLayoutViewOptionsViewPageViewModeSingleRow="单行"
scxgwLayoutViewOptionsViewPageViewModeSingleRowHint=""
scxgwSelectItemsForDisplayDataSetFields="数据集中的其余字段"
scxgwSelectItemsForDisplayGridViewFields="表格视图中的字段"
scxgwSelectItemsForDisplayPageDescription="选择要显示在表格视图中的字段并指定他们的顺序"
scxgwSelectItemsForDisplayPageTitle="要显示的字段"
scxgwSelectViewPageDescription="为您的数据源选择最合适的表格视图"
scxgwSelectViewPageGroupHeaderDBViews="数据视图"
scxgwSelectViewPageGroupHeaderServerModeViews="服务器模式视图"
scxgwSelectViewPageGroupHeaderUnboundViews="未绑定的视图"
scxgwSelectViewPageTitle="表格视图"
scxgwServerModeDataSourcePageActivate="激活"
scxgwServerModeDataSourcePageDescription=""
scxgwServerModeDataSourcePageTitle="数据源"
scxgwSizingPageCardAutoWidth="卡片自动宽度"
scxgwSizingPageCardAutoWidthHint=""
scxgwSizingPageCardSizing="卡片尺寸"
scxgwSizingPageCardSizingHint=""
scxgwSizingPageCellAutoHeight="单元格自动高度"
scxgwSizingPageCellAutoHeightHint=""
scxgwSizingPageCellEndEllipsis="单元格结束省略号"
scxgwSizingPageCellEndEllipsisHint=""
scxgwSizingPageColumnAutoWidth="列自动宽度"
scxgwSizingPageColumnAutoWidthHint=""
scxgwSizingPageDataRowSizing="数据行尺寸"
scxgwSizingPageDataRowSizingHint=""
scxgwSizingPageDescription="自定义尺寸选项"
scxgwSizingPageFooterAutoHeight="自动页脚高度"
scxgwSizingPageFooterAutoHeightHint=""
scxgwSizingPageGroupAutoSizingOptions="自动设置尺寸选项"
scxgwSizingPageGroupManualSizingOptions="手动设置尺寸选项"
scxgwSizingPageGroupRowSizing="分组行尺寸"
scxgwSizingPageGroupRowSizingHint=""
scxgwSizingPageHeaderAutoHeight="表头自动高度"
scxgwSizingPageHeaderAutoHeightHint=""
scxgwSizingPageRowCaptionAutoHeight="行标题自动高度"
scxgwSizingPageRowCaptionAutoHeightHint=""
scxgwSizingPageRowCaptionEndEllipsis="行标题结束省略号"
scxgwSizingPageRowCaptionEndEllipsisHint=""
scxgwSizingPageTitle="尺寸"
scxgwSummaryPageAllRecords="为所有记录"
scxgwSummaryPageAllRecordsHint=""
scxgwSummaryPageDescription="在页脚或分组页脚上右击鼠标来指定行的概要"
scxgwSummaryPageMultipleSelectedRecords="为两个或者多个选择的记录"
scxgwSummaryPageMultipleSelectedRecordsHint=""
scxgwSummaryPageNullIgnore="忽略空值"
scxgwSummaryPageNullIgnoreHint="忽略概要中计算出来的空值"
scxgwSummaryPageSelectedRecords="为选择的记录"
scxgwSummaryPageSelectedRecordsHint=""
scxgwSummaryPageTitle="概要"
scxgwUIElementsCardViewEmptyRows="空行"
scxgwUIElementsCardViewEmptyRowsHint=""
scxgwUIElementsCardViewExpandButtonAlignment="展开按钮排列"
scxgwUIElementsCardViewExpandButtonAlignmentHint=""
scxgwUIElementsCardViewExpandButtonAlignmentLeft="左"
scxgwUIElementsCardViewExpandButtonAlignmentLeftHint=""
scxgwUIElementsCardViewExpandButtonAlignmentRight="右"
scxgwUIElementsCardViewExpandButtonAlignmentRightHint=""
scxgwUIElementsCardViewRowLayout="行布局"
scxgwUIElementsCardViewRowLayoutHint=""
scxgwUIElementsCardViewRowLayoutHorizontal="水平"
scxgwUIElementsCardViewRowLayoutHorizontalHint=""
scxgwUIElementsCardViewRowLayoutVertical="垂直"
scxgwUIElementsCardViewRowLayoutVerticalHint=""
scxgwUIElementsPageBandsQuickCustomization="快速自定义栏"
scxgwUIElementsPageBandsQuickCustomizationHint=""
scxgwUIElementsPageColumnsQuickCustomization="快速自定义行"
scxgwUIElementsPageColumnsQuickCustomizationHint=""
scxgwUIElementsPageDescription="指定最终用户可以访问的界面元素"
scxgwUIElementsPageFilterButton="过滤器按钮可见"
scxgwUIElementsPageFilterButtonHint="显示过滤器的按钮"
scxgwUIElementsPageFilterRowVisible="过滤行"
scxgwUIElementsPageFilterRowVisibleHint=""
scxgwUIElementsPageFooter="页脚"
scxgwUIElementsPageFooterHint=""
scxgwUIElementsPageGroupBox="分组框"
scxgwUIElementsPageGroupBoxHint=""
scxgwUIElementsPageGroupFooter="分组页脚"
scxgwUIElementsPageGroupFooterHint=""
scxgwUIElementsPageGroupFooterModeAlwaysVisible="总是可见"
scxgwUIElementsPageGroupFooterModeVisibleWhenExpanded="展开时可见"
scxgwUIElementsPageGroupInterfaceElements="界面元素"
scxgwUIElementsPageHeader="页眉"
scxgwUIElementsPageHeaderHint=""
scxgwUIElementsPageHideCurrentRow="隐藏当前行"
scxgwUIElementsPageHideCurrentRowHint="隐藏在原地编辑窗体处于活动状态时正在编辑的行"
scxgwUIElementsPageIndicator="指示器"
scxgwUIElementsPageIndicatorHint=""
scxgwUIElementsPageInplaceEditForm="原地编辑窗体"
scxgwUIElementsPageInplaceEditFormHint="使用原地编辑窗体时启用记录编辑"
scxgwUIElementsPageNavigator="导航"
scxgwUIElementsPageNavigatorButtons="按钮"  //todo:"
scxgwUIElementsPageNavigatorButtonsHint=""  //todo:"
scxgwUIElementsPageNavigatorHint="导航提供了记录导航和管理的功能"
scxgwUIElementsPageNewItemRow="新建行"
scxgwUIElementsPageNewItemRowHint=""
scxgwUIElementsPagePreview="预览"
scxgwUIElementsPagePreviewHint=""
scxgwUIElementsPageRecordCaption="记录标题"
scxgwUIElementsPageRecordCaptionHint="指定卡片的标题"
scxgwUIElementsPageTitle="界面元素"
scxgwUnboundsSelectColumnsForDisplayPageDescription="创建列、名称，并指定他们的顺序"
scxgwUnboundsSelectColumnsForDisplayPageTitle="列"
scxgwUnboundsSelectItemsForDisplayPageDescription="创建项目、名称，并指定他们的顺序"
scxgwUnboundsSelectItemsForDisplayPageTitle="项"
scxgwUnboundsSelectRowsForDisplayPageDescription="创建行、名称并指定他们的顺序"
scxgwUnboundsSelectRowsForDisplayPageTitle="行数"
scxgwWizardModePageDeletePresentStructure="删除目前的层次结构"
scxgwWizardModePageDescription="为你的任务选择最合适的外观"
scxgwWizardModePageMultiLevelStructure="主从"
scxgwWizardModePageSingleLevelStructure="简单表格"
scxgwWizardModePageTitle="数据外观"
scxHalfYear="半年"
scxHalfYearShort="H"
scxHide="隐藏"
scxHideCustomization="隐藏字段列表"
scxHolidayDate="日期:"
scxHolidayDisplayFormat="%s (%s)"
scxHolidayName="名称:"
scxHolidaysEditorCaption="节假日编辑器"
scxHolidaysGroupBox="节假日"
scxHolidaysLocationEditorCaption="本地编辑器"
scxHolidaysLocationHolidayEditorCaption="节假日编辑器"
scxHorizontal="水平"
scxHotZoneStyleMediaPlayer8="MediaPlayer8"
scxHotZoneStyleMediaPlayer9="MediaPlayer9"
scxHotZoneStyleSimple="例子"
scxHotZoneStyleXPTaskBar="XPTaskBar"
scxHour="小时"
scxHours="小时"
scxIDField="编号"
scxIllegalHeight="行高度值非法"
scxIllegalWidth="列宽度值非法"
scxImport="导入(&I)"
scxImportErrorCaption="导入出错"
scxImportHint="导入"
scxIncorrectUnion="合并单元格错误"
scxIndexOutOfBounds="指针%d超界"
scxInProgress="正在进行"
scxInvalidCellDimension="无效单元格大小"
scxInvalidColumnIndex="列值 %d 导出限制"
scxInvalidColumnRowCount="行列总数无效"
scxInvalidCubeName="无效的%sCube名称。"
scxInvalidCustomField="非法的自定义字段"
scxInvalidFieldName="非法字段名"
scxInvalidLayout="无效的布局！"
scxInvalidNumber="您必须输入一个有效的数字。"
scxInvalidProviderVersion="提供程序版本不匹配的 OLAP 数据源版本"
scxInvalidRecurrenceDuration="事件持续时间必须小于重复间隔。缩短持续时间，或更改对话框中的定期模式。""
scxInvalidRowIndex="行索引值 %d 超出限制"
scxInvalidStreamFormat="流格式无效"
scxInvalidStyleIndex="无效样式索引值 %d"
scxItems="项编辑器..."
scxKPIs="KPIs"
scxKPIStatusBad="坏的"
scxKPIStatusGood="好"
scxKPIStatusNeutral="中性"
scxKPITrendGoingDown="下去"
scxKPITrendGoingUp="上去"
scxKPITrendNoChange="不改变"
scxLabel="标签(&B):"
scxLabelAs="标签为:"
scxLabelField="标签"
scxLast="最后"
scxLastButtonHint="最后的资源"
scxLinkHint="任务链接: %s (%s) \n从: %s \n到: %s"
scxLoadingFonts="正在读取 ..."
scxLocation="位置(&L):"
scxLocationField="位置"
scxLocationName="名称:"
scxLocationsGroupBox="本地"
scxLockedStateText="请稍候..."
scxMaskEditEmptyMaskCollectionFile="掩码格式文件为空"
scxMaskEditIllegalFileFormat="文件格式非法"
scxMaskEditInvalidEditValue="编辑值非法"
scxMaskEditMaskCollectionFiles="掩码格式文件"
scxMaskEditNoMask="无"
scxMaskEditRegExprError="正则表达式错误:"
scxMeasureGroups="度量值组"
scxMeasures="措施"
scxMergeCells="合并单元格"
scxMessageField="消息"
scxMinute="分钟"
scxMinutes="分钟"
scxMonthCalendar="月历"
scxMonthly="月(&M)"
scxMonths="月"
scxMoveToBeginning="移至开头"
scxMoveToEnd="移至尾部"
scxMoveToLeft="向左移动"
scxMoveToRight="向右移动"
scxMultiSelectRequired="必须多选"
scxNextAppointment="下一个事件"
scxNextButtonHint="下一个资源"
scxNextPageButtonHint="下一页"
scxNoAvailableFreeTime="没有空余时间。"
scxNoDataToDisplay="<无可显示的数据>"
scxNoEndDate="无结束日期(&N)"
scxNone="普通事件"
scxNoneEvent="普通事件"
scxNotExistGridLevel="目标表层不存在"
scxNotExistGridView="表视图不存在"
scxNotImplemented="尚未实现！"
scxNotStarted="未开始"
scxNumberStyleDescription="数字是用于常规数字显示。"
scxOccurenceEvent="触发事件"
scxOccurences="次后结束"
scxOccurrence="普通事件"
scxOf="共"
scxOfEvery="每"
scxOk="确定(&O)"
scxOneDay="一天"
scxOperationNotSupported="不支持此操作"
scxOrder="顺序"
scxOthers="其他的"
scxOutlookFormatMismatch="节假日格式不匹配"
scxOutOfOffice="外出"
scxParentIDField="父组件编号"
scxPasteCommand="粘贴单元格"
scxPattern="周期性"
scxPCAllowRotateError="%s样式不支持旋转选项卡"
scxPCDefaultHintBottomRightButton="下一页"
scxPCDefaultHintCloseButton="关闭激活的选项卡"
scxPCDefaultHintGoDialogButton="用打开对话框"
scxPCDefaultHintNewButton="新建选项卡"
scxPCDefaultHintTabCloseButton="关闭"
scxPCDefaultHintTopLeftButton="上一页"
scxPCImageListIndexError="索引(%d)必须在0至%d之间"
scxPCNoBaseImages="未分配基本图片"
scxPCNoRegisteredStyles="有样式未注册"
scxPCPageIndexError="%d不是一个有效的页索引值。也索引必须在0到%d之间"
scxPCPainterClassError="PCPainterClass为空"
scxPCStandardStyleError="%s是一个不支持的标准样式"
scxPCStyleNameError="%s是一个未注册的样式名称"
scxPCTabCountEqualsZero="Tabs.Count = 0"
scxPCTabIndexError="当前选项卡索引(%d)超出界限"
scxPCTabVisibleIndexOutsOfBounds="TabVisibleIndex(%d)必须在0到%d之间"
scxPCVisibleTabListEmpty="是非可见选项卡"
scxPivotGridCancel="取消"
scxPivotGridOk="确定"
scxPivotGridShowAll="(全部显示)"
scxpm10Minutes="10 分(&M)"
scxpm15Minutes="15 分(&1)"
scxpm30Minutes="30 分(&3)"
scxpm5Minutes="5 分(&5)"
scxpm60Minutes="60 分(&0)"
scxpm6Minutes="6 分(&6)"
scxpmBusy="忙(&B)"
scxpmDelete="删除(&D)"
scxpmEditSeries="编辑序列(&R)"
scxpmFree="闲(&F)"
scxpmFullYear="全年(&F)"
scxpmGoToDate="转到日期(&T)..."
scxpmGotoThisDay="转到这天(&D)"
scxpmHalfYear="半年(&H)"
scxpmLabel="标签(&L)"
scxpmNewAllDayEvent="新全天事件(&E)"
scxpmNewEvent="新事件(&N)"
scxpmNewRecurringEvent="新周期事件(&R)"
scxpmOpen="打开(&O)"
scxpmOutOfOffice="外出(&O)"
scxpmQuarter="季度(&Q)"
scxpmResourcesLayout="周期编辑..."
scxpmShowTimeAs="时间显示为(&H)"
scxpmTentative="暂定(&T)"
scxpmTimeZone="改变时区(&G)"
scxpmToday="今天(&O)"
scxPopupMenuFormatCells="格式化单元格"
scxPopupMenuHideCols="隐藏列"
scxPopupMenuHideRows="隐藏行"
scxPopupMenuMergeCells="合并单元格"
scxPopupMenuSplitCells="拆分单元格"
scxPopupMenuUnhideCols="取消列隐藏"
scxPopupMenuUnhideRows="取消行隐藏"
scxPrefilterCustomizeButtonCaption="预过滤器..."
scxPrefilterIsEmpty="<预过滤器为空>"
scxPrevAppointment="上一个事件"
scxPrevButtonHint="前一资源"
scxPrevPageButtonHint="上一页"
scxQuarter="季度"
scxQuarterFormat="季度 %d"
scxQuarterly="季度(&Q)"
scxQuarterShort="Q"
scxRangeOfRecurrence=" 重复范围 "
scxrCaptionReminder="提醒"
scxrCaptionReminders="%d 个提醒"
scxrDismissAllButton="解散所有(&A)"
scxrDismissButton="解散(&D)"
scxrDueIn="预期在"
scxRecurEvery="重复间隔为(&U)"
scxRecurrence="重复(&R)"
scxRecurrenceCaption="事件周期"
scxRecurrenceDailyMessage="日"
scxRecurrenceEvent="重复事件"
scxRecurrenceField="循环模式"
scxRecurrenceHolidayCaption="节假日重复"
scxRecurrenceIndexField="重复索引"
scxRecurrenceLabel="重复:"
scxRecurrenceMonthlyMessage="月"
scxRecurrencePattern=" 循环模式 "
scxRecurrenceWeeklyMessage="周"
scxRecurrenceYearlyMessage="年"
scxRegExprCantCreateEmptyAlt="另一种不应该空"
scxRegExprCantCreateEmptyBlock="此块应该为空"
scxRegExprCantCreateEmptyEnum="不能创建空的枚举"
scxRegExprCantUseParameterQuantifier="参数量词不能应用在这里"
scxRegExprCantUsePlusQuantifier=""+"号不能应用在这里"
scxRegExprCantUseStarQuantifier=""*"号不能应用在这里"
scxRegExprChar="字符"
scxRegExprEmptySourceStream="源数据流为空"
scxRegExprHexNumberExpected="输入的 "%s" 不是十六进制的数"
scxRegExprHexNumberExpected0="需要十六进制数"
scxRegExprIllegalIntegerValue="非法的整形数值"
scxRegExprIllegalQuantifier="非法量词 "%s""
scxRegExprIllegalSymbol="非法"%s""
scxRegExprIncorrectParameterQuantifier="不正确的参数量词"
scxRegExprIncorrectSpace=""\"后不允许空格"
scxRegExprLine="行"
scxRegExprMissing="丢失 "%s""
scxRegExprNotAssignedSourceStream="未分配的源数据流"
scxRegExprNotCompiled="未编译的正则表达式"
scxRegExprNotSupportQuantifier="不支持的参数量词"
scxRegExprSubrangeOrder="子范围的起始字符必须小于结束字符"
scxRegExprTooBigReferenceNumber="引用数太大"
scxRegExprUnnecessary="不需要 "%s""
scxReminder="提醒:"
scxReminderDateField="提醒日期"
scxReminderField="提醒"
scxReminderMinutesBeforeStartField="在开始之前的提醒时间 （分钟）"
scxRemoveAllSorting="取消所有排序"
scxRemoveRecur="删除周期(&R)"
scxReplaceOccurrenceDate="某些月份不足%s天，对于这些月份，事件将被安排在该月的最后一天。"
scxRequiredFieldsNeeded="必要字段%s未分配值！"
scxResource="资源"
scxResourceField="资源"
scxResourceLayoutCaption="周期编辑"
scxrOpenItemButton="打开项目(&O)"
scxRowArea="行区域"
scxrSelected="选择 %d 个提醒"
scxrSnoozeButton="稍后(&S)"
scxrSnoozeLabel="稍后(&S)"
scxrStartTime="起始时间： %s"
scxrSubject="主题"
scxSave="保存"
scxSaveAndClose="保存并关闭"
scxSaveAndCloseHint="保存并关闭"
scxSCalcError="错误"
scxSecond="第二"
scxSEditRepositoryBlobItem="BlobEdit|代表 BLOB 编辑器"
scxSEditRepositoryButtonItem="ButtonEdit|代表嵌入式按钮编辑控件"
scxSEditRepositoryCalcItem="CalcEdit|代表一个编辑控件和一个下拉列表计算器窗口"
scxSEditRepositoryCheckBoxItem="CheckBox|代表一个复选框控件"
scxSEditRepositoryCheckComboBox="CheckComboBox|代表组合复选框"
scxSEditRepositoryCheckGroupItem="CheckGroup|表示一组复选框"
scxSEditRepositoryColorComboBoxItem="ColorComboBox |代表一个编辑器和颜色功能"
scxSEditRepositoryColorEditItem="ColorEdit|代表一个编辑控件和一个下拉颜色图库"
scxSEditRepositoryComboBoxItem="ComboBox|代表组合框编辑器"
scxSEditRepositoryCurrencyItem="CurrencyEdit|代表一个编辑器启动编辑货币数据"
scxSEditRepositoryDateItem="DateEdit|代表一个编辑控件具有一个下拉日历"
scxSEditRepositoryDateTimeWheelPickerItem="DateTimeWheelPicker|表示编辑控件，它允许使用一个旋转的选取日期时间值的控件"
scxSEditRepositoryFontNameComboBoxItem="FontNameComboBox |代表一个编辑器和字体功能"
scxSEditRepositoryHyperLinkItem="HyperLink|岱庙一个具有超链接功能的文本编辑器"
scxSEditRepositoryImageComboBoxItem="ImageComboBox|代表列表中的图像和文本字符串下拉列表窗口内的显示编辑器"
scxSEditRepositoryImageItem="Image|代表图像编辑器"
scxSEditRepositoryLabelItem="Label|代表一个标签"
scxSEditRepositoryLookupComboBoxItem="LookupComboBox|代表查找组合框控件"
scxSEditRepositoryLookupSparklineItem="LookupSparkline|表示查找迷你图编辑器"
scxSEditRepositoryMaskItem="MaskEdit|代表一个通用的掩码编辑控件。"
scxSEditRepositoryMemoItem="Memo|代表允许编辑备注数据编辑控件"
scxSEditRepositoryMRUItem="MRUEdit|代表下拉列表窗口中显示最近使用的项目 (MRU) 列表中的文本编辑器"
scxSEditRepositoryPopupItem="PopupEdit|代表一个带下拉列表的编辑控件"
scxSEditRepositoryProgressBarItem="ProgressBar|代表一个进度栏"
scxSEditRepositoryRadioGroupItem="RadioGroup|代表一组单选按钮"
scxSEditRepositoryRatingControlItem="RatingControl|Represents a rating control"
scxSEditRepositoryRichEditItem="RichEdit|RichEdit控件"
scxSEditRepositoryShellComboBoxItem="ShellComboBox|代表一个组合框和一个下拉外壳树视图"
scxSEditRepositorySparklineItem="Sparkline|表示一个迷你图编辑器"
scxSEditRepositorySpinButtonItem="SpinButton|代表一个数值调节按钮"
scxSEditRepositorySpinItem="SpinEdit|代表一个数值调节编辑器"
scxSEditRepositoryTextItem="TextEdit|代表一个单独的一行文本编辑器"
scxSEditRepositoryTimeItem="TimeEdit|代表时间值显示编辑器"
scxSEditRepositoryToggleSwitchItem="ToggleSwitch|表示一个拨动开关控件，允许您选择一个选项"
scxSEditRepositoryTrackBarItem="TrackBar|代表一个轨迹栏"
scxSelectAll="全选(&A)"
scxSelectionInDocument="<< 在文件选择 >>"
scxSelectNone="取消选择(&N)"
scxSeparator="-"
scxServer="服务器"
scxSets="Sets"
scxShedulerEditorFormNotRegistered="没有注册的编辑器窗体"
scxSheetName="表"
scxShellBrowserDlgCaption="浏览文件夹"
scxShellBrowserDlgCurrentFolderCaption="当前文件夹"
scxShowAs="显示为:"
scxShowCustomization="显示字段列表"
scxShowFewerResourcesButtonHint="显示更少资源"
scxShowIn="显示在(&S):"
scxShowMoreResourcesButtonHint="显示更多资源"
scxShowPrefilterDialog="显示预过滤对话框"
scxShowTimeAs="时间显示为(&W):"
scxSHyperLinkDoubleSlash="//"
scxSHyperLinkPrefix="http://"
scxSortCellsAction="对单元格进行过滤"
scxSortGroupByThisColumn="通过这列排序"%s""
scxSortGroupByThisRow="通过这行排序"%s""
scxSplitCells="拆分单元格"
scxSpreadSheetAllColumn="整列"
scxSpreadSheetAllRow="整行"
scxSpreadSheetDefineNameError="错误的名称，名称已经存在"
scxSpreadSheetDefineNameError2="错误的名称，名称中含有非法字符"
scxSpreadSheetDeleteCells="删除"
scxSpreadSheetDeleteLastSheet="不能够删除唯一的一张表格"
scxSpreadSheetErrorReadSST="在读取SST的记录时发生错误"
scxSpreadSheetInsertCells="插入"
scxSpreadSheetInvalidFileFormat="无效的 %s 文件格式"
scxSpreadSheetInvalidFileName="%s 无效文件名称"
scxSpreadSheetInvalidSheetCaption="表名非法或已经存在"
scxSpreadSheetInvalidSheetNumber="非法的页码"
scxSpreadSheetInvalidStreamFormat="流格式无效"
scxSpreadSheetMergeCellError="在合并单元格时发生错误, 这些单元格已经执行了合并操作"
scxSpreadSheetMergeCellError2="正在对一些合并后的单元格进行修改"
scxSpreadSheetSheetPageExist="页面已经存在"
scxSpreadSheetShiftCellBottom="单元格下移"
scxSpreadSheetShiftCellLeft="单元格左移"
scxSpreadSheetShiftCellRight="单元格右移"
scxSpreadSheetShiftCellTop="单元格上移"
scxStart="开始(&S):"
scxStart1="开始(&T):"
scxStartField="开始"
scxStartTime="起始时间(&T):"
scxStartToFinish="开始到完成 "
scxStartToFinishLong="开始至完成 (SF)"
scxStartToFinishShort="SF"
scxStartToStart="开始至开始"
scxStartToStartLong="开始至开始 (SS)"
scxStartToStartShort="SS"
scxStateField="状态"
scxStyleInvalidCellStyle="无效的单元格样式"
scxStyleInvalidColorIndex="无效的颜色索引"
scxStyleManagerCreate="无法创建样式管理器"
scxStyleManagerKill="本风格管理器现在开始使用，在此段否则无法释放"
scxSubject="主题(&S):"
scxSuffixDay="天"
scxSuffixDays="天"
scxSuffixHour="小时"
scxSuffixHours="小时"
scxSuffixMinute="分钟"
scxSuffixMinutes="分钟"
scxSuffixWeek="周"
scxSuffixWeeks="周"
scxTaskComplete="任务完成(&M):"
scxTaskCompleteField="任务完成"
scxTaskDependencyEditorCaption="任务依赖"
scxTaskIndexField="任务索引"
scxTaskLinksField="任务链接"
scxTaskStatus="任务状态"
scxTaskStatusField="任务状态"
scxTaskWrongTimeBounds="你要输入一个在 %s - %s 之间的新日期。"
scxTentative="暂定"
scxTextStyleDescription="格式化的单元格被视为文本，即使在单元格中数字的文本。完全按输入显示单元格。"
scxThe="在(&H)"
scxThird="第三"
scxTime0m="0 分"
scxTime10h="10 小时"
scxTime10m="10 分"
scxTime11h="11 小时"
scxTime12h="12 小时"
scxTime15m="15 分"
scxTime18h="18 小时"
scxTime1d="1 天"
scxTime1h="1 小时"
scxTime1w="1 周"
scxTime20m="20 分"
scxTime2d="2 天"
scxTime2h="2 小时"
scxTime2w="2 周"
scxTime30m="30 分"
scxTime3d="3 天"
scxTime3h="3 小时"
scxTime4d="4 天"
scxTime4h="4 小时"
scxTime5h="5 小时"
scxTime5m="5 分"
scxTime6h="6 小时"
scxTime7h="7 小时"
scxTime8h="8 小时"
scxTime9h="9 小时"
scxTimeGrid="时间格"
scxTLPrefixName="TcxTreeList"
scxTo="到:"
scxTreeListAllNodesMenuItem="所有节点"
scxTreeListAvgMenuItem="平均"
scxTreeListBestFitAllColumnsMenuItem="自适应(全部列)(&T)"
scxTreeListBestFitMenuItem="最适合(&B)"
scxTreeListClearSortingMenuItem="清空排序(&C)"
scxTreeListCountMenuItem="数量"
scxTreeListDeletingConfirmationCaption="确认"
scxTreeListDeletingFocusedConfirmationText="删除记录？"
scxTreeListFieldChooserMenuItem="字段选择器(&I)"
scxTreeListFooterMenuItem="页脚(&F)"
scxTreeListGroupFootersAlwaysVisibleMenuItem="始终可见(&A)"
scxTreeListGroupFootersInvisibleMenuItem="隐藏(&H)"
scxTreeListGroupFootersMenuItem="分组页脚(&G)"
scxTreeListGroupFootersVisibleWhenExpandedMenuItem="展开时可见(&V)"
scxTreeListHorizontalAlignmentCenterMenuItem="居中(&N)"
scxTreeListHorizontalAlignmentLeftMenuItem="左(&L)"
scxTreeListHorizontalAlignmentMenuItem="水平对齐(&R)"
scxTreeListHorizontalAlignmentRightMenuItem="右(&R)"
scxTreeListMaxMenuItem="最大"
scxTreeListMinMenuItem="最小"
scxTreeListNoneMenuItem="无"
scxTreeListRemoveThisColumnMenuItem="删除此列(&E)"
scxTreeListSortAscendingMenuItem="升序排序(&S)"
scxTreeListSortDescendingMenuItem="降序排序(&O)"
scxTreeListSumMenuItem="总和"
scxTreeListVerticalAlignmentBottomMenuItem="下(&B)"
scxTreeListVerticalAlignmentCenterMenuItem="居中(&N)"
scxTreeListVerticalAlignmentMenuItem="垂直对齐(&T)"
scxTreeListVerticalAlignmentTopMenuItem="上(&T)"
scxTwoOccurrencesPerDay=""%s"的两个事件不能在同一天发生."
scxType="类型(&T):"
scxUDAssociated=" 已经关联 "
scxUnsupportedExport="不支持的导出类型：%d"
scxUnsupportedProviderVersion="不支持的数据提供程序版本： %d"
scxUntitled="无标题"
scxUntitledEvent="无标题事件"
scxUp="上(&U)"
scxUpdate="更新"
scxUseDefaultColor="使用默认的颜色设置"
scxVertical="垂直"
scxWaiting="正在等待"
scxWeekCalendar="周历"
scxWeekday="周日"
scxWeekendday="周末"
scxWeekly="周(&W)"
scxWeeksOn="周后的:"
scxWorkbookRead="读取文件流时发生错误"
scxWorkbookWrite="写入XLS文件出错"
scxWorkWeekCalendar="工作周历"
scxWrongPattern="周期模式不合法。"
scxWrongTimeBounds="结束日期早于起始日期。"
scxXLSFileHasUnknownFunction="流具有未知函数的"
scxXLSNameRef="引用无效的名称:  "
scxYearly="年(&Y)"
sdx3DEffects="三维效果"
sdx760V12Manufacturer="宝马"
sdx760V12Model="760Li V12"
sdx760V12Tires="P245/45R19 Fr - P275/40R19 Rr Performance. Low Profile tires with 245mm width, 19.0" rim"
sdx760V12Transmission="Elec 6-Speed Automatic w/Steptronic"
sdxAbortPrinting="要中断打印吗 ？"
sdxActionAddGroup="创建组"
sdxActionAutoFill="自动填充"
sdxActionCellEditing="单元格编辑"
sdxActionCellsMerge="合并单元格"
sdxActionChangeConditionalFormatting="改变条件格式"
sdxActionChangeContainer="改变容器"
sdxActionChangeGroup="改变组"
sdxActionChangeHyperlink="改变超链接"
sdxActionChangeRowColumn="更改行/列"
sdxActionClearCells="清除单元格"
sdxActionCutCells="剪切单元格"
sdxActionDeleteCells="删除单元格"
sdxActionDeleteComment="删除注释"
sdxActionDeleteGroup="取消组"
sdxActionDragAndDrop="播放"
sdxActionEditComment="编辑点评"
sdxActionExpandCollapseGroup="显示/隐藏细节"
sdxActionFillCells="填充单元格"
sdxActionFormatCells="格式化单元格"
sdxActionInsertCells="插入"
sdxActionMoveCells="移动单元格"
sdxActionPasteCells="粘贴单元格"
sdxActionReplace="替换"
sdxActionSortCells="排序"
sdxActiveTabToTop="在顶部显示活动标签页"
sdxAddAndDesignReport="增加并设计报表(&E)..."
sdxAddItemsToComposition="增加项目到组件"
sdxAddReport="增加报表"
sdxAddress1="123 Home Lane"
sdxAddress2="9333 Holmes Dr."
sdxAddressCaption="地址"
sdxAdjustOnScale="适合页面(&A)"
sdxAdjustTo="调整到(&A):"
sdxAdministration="管理员"
sdxAggregatedLinks="聚合链接(&G):"
sdxAlertWindowClose="关闭"
sdxAlertWindowDropdown="显示下拉菜单"
sdxAlertWindowNavigationPanelDefaultDisplayMask="第[MessageIndex]条,共[MessageCount]条]"
sdxAlertWindowNextMessage="下一条消息"
sdxAlertWindowPin="固定"
sdxAlertWindowPreviousMessage="上一条消息"
sdxAlignment="对齐"
sdxAllDayMessage="所有日期"
sdxAllRecords="所有记录"
sdxAncestorError="停靠以及自动隐藏的操作不能使用在做为模板的窗体中。"
sdxAppearance="外观"
sdxApril="四月"
sdxAprilShort="四月"
sdxAugust="八月"
sdxAugustShort="八月"
sdxAuto="自动"
sdxAutoCalcPreviewLineCount="自动计算预览行数(&U)"
sdxAutoColorText="自动"
sdxAutoColumnsExpand="自动展开列(&U)"
sdxAutoNodesExpand="自动展开节点(&U)"
sdxAutoRowsExpand="自动展开行(&R)"
sdxAutoTextBar="自动图文集"
sdxAutoTextDialogCaption="编辑自动图文集"
sdxAutoWidth="自动调整宽度(&W)"
sdxAvailableItems="可用项目(&V)"
sdxAvailableLinks="可用链接(&A):"
sdxAvailableReportLinks="可用报表链接"
sdxAvailableSources="可用的源(&A)"
sdxBackground="背景(&B)"
sdxBadDatePrintRange="结束框中的日期不能在开始框日期前。"
sdxBadTimePrintRange="打印时间不是有效的。开始时间必须在结束时间的前面。"
sdxBandBackgroundStyle="BandBackground"
sdxBandColor="带区颜色(&B):"
sdxBandFont="带区字体"
sdxBandHeaderStyle="BandHeader"
sdxBands="带区(&B)"
sdxBandsOnEveryPage="带区"
sdxBaseStyle="基本风格"
sdxBDiagonalFillPattern="对角线"
sdxBehaviors="行为"
sdxBehaviorsGroups="分组"
sdxBehaviorsTab="行为"
sdxBestFit="自适应(&B)"
sdxBetaTesters="测试员"
sdxBorderColor="边框颜色(&B):"
sdxBorderLines="边框(&B)"
sdxBorders="边框"
sdxBottom="下(&B):"
sdxBottomMargin="下边距"
sdxBreadcrumbEditInvalidPath="不能找到"%s".检查拼写后再试。"
sdxBreadcrumbEditInvalidStreamVersion="无效的数据版本：%d"
sdxBrushColor="刷子颜色"
sdxBrushDlgCaption="画笔属性"
sdxBrushStyleBDiagonal="对角线"
sdxBrushStyleClear="清除"
sdxBrushStyleCross="交叉"
sdxBrushStyleDiagCross="斜十字"
sdxBrushStyleFDiagonal="对角线"
sdxBrushStyleHorizontal="水平"
sdxBrushStyleSolid="实线"
sdxBrushStyleVertical="垂直"
sdxBtnAdd="添加(&A)"
sdxBtnAddComposition="添加组件(&C)"
sdxBtnApply="应用(&A)"
sdxBtnAutomatic="自动(&A)"
sdxBtnBackground="背景"
sdxBtnBrowse="浏览(&B)..."
sdxBtnCancel="取消"
sdxBtnChangeFont="更换字体(&N)..."
sdxBtnClose="关闭"
sdxBtnColor="颜色(&L)..."
sdxBtnCopy="复制(&C)..."
sdxBtnDefault="默认(&D)..."
sdxBtnDefinePrintStyles="定义样式(&D)..."
sdxBtnDelete="删除(&D)..."
sdxBtnDescription="描述(&D)..."
sdxBtnDesign="设计(&E)..."
sdxBtnEdit="编辑(&E)..."
sdxBtnEvenFont="偶数行字体(&V)..."
sdxBtnFillEffects="填充效果(&F)..."
sdxBtnFix="调整(&F)"
sdxBtnFixedFont="固定字体(&I)..."
sdxBtnFont="字体(&N)..."
sdxBtnFooterBackground="背景(&G)"
sdxBtnFooterFont="字体(&N)..."
sdxBtnFootnoteProperties="页脚属性…..."
sdxBtnGroupFont="组字体(&P)..."
sdxBtnHeaderBackground="背景(&B)"
sdxBtnHeaderFont="字体(&F)..."
sdxBtnHeadersFont="标题字体(&H)..."
sdxBtnHelp="帮助(&H)"
sdxBtnIgnore="忽略(&I)"
sdxBtnInvertColors="反转颜色(&N)"
sdxBtnMoreColors="更多颜色(&M)..."
sdxBtnMoveDown="下移(&N)"
sdxBtnMoveUp="上移(&U)"
sdxBtnNetwork="网络(&W)..."
sdxBtnNew="新建(&N)..."
sdxBtnNo="否(&N)"
sdxBtnNoFill="不填充(&N)"
sdxBtnNone="无(&N)"
sdxBtnOddFont="奇数行字体(&N)..."
sdxBtnOK="确定"
sdxBtnOKAccelerated="确定(&O)"
sdxBtnOptions="选项(&O)..."
sdxBtnOtherTexture="其它纹理(&X)..."
sdxBtnPageSetup="页面设置(&G)..."
sdxBtnPreview="预览(&V)..."
sdxBtnPrint="打印..."
sdxBtnPrintPreview="打印预览(&V)..."
sdxBtnPrintStyles="打印样式"
sdxBtnProperties="属性(&R)..."
sdxBtnRemoveInconsistents="删除不必要"
sdxBtnRename="重命名(&M)..."
sdxBtnReset="重置(&R)"
sdxBtnRestoreDefaults="恢复默认值(&R)"
sdxBtnRestoreOriginal="还原(&O)"
sdxBtnSaveAs="另存为(&A)..."
sdxBtnSelectPicture="选择图片(&L)..."
sdxBtnShowToolBar="显示工具栏(&T)"
sdxBtnStyleOptions="样式选项..."
sdxBtnTexture="纹理(&T)..."
sdxBtnTextureClear="清空(&E)"
sdxBtnTitleProperties="标题属性..."
sdxBtnYes="是(&Y)"
sdxBtnYesToAll="全部是(&A)"
sdxBuildingReport="构建报表：已完成 %d%%"
sdxBuildingReportStatusText="生成报表 - 按"Esc"键取消"
sdxBuiltIn="[内建]"
sdxBuiltInPopupMenuBringToFront="置前"
sdxBuiltInPopupMenuClearContents="清除内容"
sdxBuiltInPopupMenuCopy="复制(&C)"
sdxBuiltInPopupMenuCreateHyperlink="链接(&H)"
sdxBuiltInPopupMenuCustomizeObject="自定义对象(&U)..."
sdxBuiltInPopupMenuCut="剪切(&T)"
sdxBuiltInPopupMenuDelete="删除(&D)"
sdxBuiltInPopupMenuDeleteComment="删除注释"
sdxBuiltInPopupMenuDeleteDialog="删除(&D)..."
sdxBuiltInPopupMenuEditComment="编辑注释(&E)"
sdxBuiltInPopupMenuEditHyperlink="编辑链接[&H]"
sdxBuiltInPopupMenuFormatCells="格式化单元格(&F)..."
sdxBuiltInPopupMenuHide="隐藏(&H)"
sdxBuiltInPopupMenuHideComment="隐藏注释(&H)"
sdxBuiltInPopupMenuInsert="插入(&I)"
sdxBuiltInPopupMenuInsertComment="插入注释..."
sdxBuiltInPopupMenuInsertDialog="插入(&I)..."
sdxBuiltInPopupMenuMergeCells="合并单元格(&M)"
sdxBuiltInPopupMenuOpenHyperlink="打开超链接"
sdxBuiltInPopupMenuPaste="粘贴(&P)"
sdxBuiltInPopupMenuPasteSpecial="选择性粘贴"
sdxBuiltInPopupMenuPasteSpecialAll="粘贴"
sdxBuiltInPopupMenuPasteSpecialFormulas="公式"
sdxBuiltInPopupMenuPasteSpecialFormulasAndColumnWidths="保持源列宽度"
sdxBuiltInPopupMenuPasteSpecialFormulasAndFormatting="公式和数字格式"
sdxBuiltInPopupMenuPasteSpecialFormulasAndStyles="保留源格式"
sdxBuiltInPopupMenuPasteSpecialShowDialog="选择性粘贴..."
sdxBuiltInPopupMenuPasteSpecialValuesAndFormatting="值和数字格式化"
sdxBuiltInPopupMenuPasteSpecialValuesAndStyles="值和源格式"
sdxBuiltInPopupMenuProtectSheet="保护工作表..."
sdxBuiltInPopupMenuRemoveHyperlink="删除超链接"
sdxBuiltInPopupMenuRename="重命名(&R)"
sdxBuiltInPopupMenuSendToBack="置后"
sdxBuiltInPopupMenuShowComment="显示注释"
sdxBuiltInPopupMenuSplitCells="取消合并(&N)"
sdxBuiltInPopupMenuUnhide="取消隐藏(&U) \n"
sdxBuiltInPopupMenuUnhideDialog="取消隐藏(&U)..."
sdxBuiltInPopupMenuUnprotectSheet="撤消工作表保护..."
sdxButtons="按钮"
sdxByBands="带区"
sdxByColumns="列"
sdxByRows="行(&R)"
sdxBytes="字节"
sdxByTopLevelGroups="按顶层分组"
sdxByWrapping="通过换行(&W)"
sdxCameraDialogAssign="分配(&A)"
sdxCameraDialogCancel="取消(&C)"
sdxCameraDialogCaption="摄像头预览"
sdxCameraDialogPause="暂停(&P)"
sdxCameraDialogPlay="播放(&P)"
sdxCameraInactive="非活动状态"
sdxCameraInitializing="正在初始化..."
sdxCameraIsBusy="摄像头无法访问."#13#10"尝试关闭其他可能会使用摄像头的程序"
sdxCameraNotDetected="没有发现摄像头"
sdxCameraPaused="已暂停"
sdxCameraRunning="正在运行"
sdxCancel="取消"
sdxCannotFindView="无法找到视图 ID值 = %d。"
sdxCannotLoadImage="不能删除图像"%s""
sdxCannotPrintNoItemsAvailable="没有可用的指定打印范围内的项目。"
sdxCannotPrintNoSelectedItems="不能打印没有选定项。选择一个项目，然后尝试再次打印。"
sdxCannotRenameFolderText="无法重命名文件夹"%s"。名称"%s"的文件夹已经存在。请指定一个不同的名称。"
sdxCannotRenameItemText="无法重命名项目"%s"。具有名称"%s"的项目已存在。请指定一个不同的名称。"
sdxCannotUseOnEveryPageMode="不能使用OnEveryPage模式 \n \n你应该 \n  - 折叠所有主记录 \n  -或者切换到"行为"选项卡关闭非循环"选项"
sdxCannotUseOnEveryPageModeInAggregatedState="当执行在聚合模式中时不能使用OnEveryPage模式"
sdxCaption="标题(&C)："
sdxCaptionColor="标题颜色："
sdxCaptionNodeFont="层级标题字体"
sdxCaptionStyle="标题"
sdxCaptionTransparent="标题透明"
sdxCardCaptionRowStyle="卡片标题行"
sdxCardRowCaptionStyle="卡片行标题"
sdxCardsRows="卡片(&C)"
sdxCardsTab="卡片"
sdxCarEngine="引擎"
sdxCarIsSUVColumnCaption="SUV"
sdxCarLevelCaption="汽车"
sdxCarManufacturer="制造商"
sdxCarManufacturerCountry1="德国"
sdxCarManufacturerCountry2="美国"
sdxCarManufacturerCountry3="德国"
sdxCarManufacturerCountry4="英国"
sdxCarManufacturerCountry5="德国"
sdxCarManufacturerName1="宝马"
sdxCarManufacturerName2="福特"
sdxCarManufacturerName3="奥迪"
sdxCarManufacturerName4="路虎"
sdxCarManufacturerName5="戴姆勒克莱斯勒 AG"
sdxCarModel="型号"
sdxCarModel1="X5 4.8is"
sdxCarModel2="Excursion"
sdxCarModel3="S8全时四驱系统"
sdxCarModel4="G4挑战"
sdxCarModel5="Maybach 62"
sdxCarModelColumnCaption="型号"
sdxCarName="车名"
sdxCarParking="停车场"
sdxCarPhotoColumnCaption="照片"
sdxCarSpeedCountColumnCaption="Speed Count"
sdxCarTires="轮胎"
sdxCarTransmission="传输"
sdxCashCaption="现金"
sdxCategoryStyle="类别"
sdxCellFillStyleDiagCrossHatch="对角线"
sdxCellFillStyleDiagonalStrip="删除对角线"
sdxCellFillStyleGray12="12% 灰色"
sdxCellFillStyleGray25="25% 灰色"
sdxCellFillStyleGray50="50% 灰色"
sdxCellFillStyleGray6="6% 灰色"
sdxCellFillStyleGray75="75% 灰色"
sdxCellFillStyleHorzStrip="删除水平线"
sdxCellFillStyleRevDiagonalStrip="反向斜条"
sdxCellsModificationDialogButtonCancel="取消"
sdxCellsModificationDialogButtonOK="确定"
sdxCellsModificationDialogDeleteCaption="删除"
sdxCellsModificationDialogInsertCaption="插入"
sdxCenterOnPage="居中方式"
sdxCharts="图表"
sdxCheckAll="全选(&A)"
sdxCheckAllChildren="检查所有子项(&C)"
sdxCheckMarks="用文本显示检查框"
sdxCheckMarksAsText="用文本显示检查框(&D)"
sdxCircle="圆"
sdxClear="清空(&L)..."
sdxClipboardFormatImage="图像"
sdxClipboardFormatText="文本"
sdxCloneStyleCaptionPrefix="副本 (%D) "
sdxCloseExplorerHint="关闭浏览器"
sdxColor="颜色(&L):"
sdxColorAqua="浅绿色"
sdxColorBlack="黑色"
sdxColorBlue="蓝色"
sdxColorBlueGray="蓝灰色"
sdxColorBrighthGreen="鲜绿色"
sdxColorBrown="棕色"
sdxColorDarkBlue="深蓝色"
sdxColorDarkGreen="深绿色"
sdxColorDarkRed="深红色"
sdxColorDarkTeal="深灰蓝色"
sdxColorDialogAddToCustomColors="添加自定义颜色(&A)"
sdxColorDialogApply="确定(&O)"
sdxColorDialogBasicColors="基本颜色"
sdxColorDialogCancel="取消(&C)"
sdxColorDialogCaption="颜色编辑器"
sdxColorDialogCustomColors="自定义颜色"
sdxColorDialogDefineCustomColor="定义自定义颜色(&D) >>"
sdxColorDrakYellow="深黄色"
sdxColorGalleryStandardColors="标准颜色"
sdxColorGalleryThemeColors="主题颜色"
sdxColorGold="金色"
sdxColorGray25="灰色-25%"
sdxColorGray40="灰色-40%"
sdxColorGray50="灰色-50%"
sdxColorGray80="灰色-80%"
sdxColorGreen="绿色"
sdxColorIndigo="靛蓝色"
sdxColorLavender="淡紫色"
sdxColorLightBlue="浅蓝色"
sdxColorLightGreen="浅绿色"
sdxColorLightOrange="浅桔黄色"
sdxColorLightTurquoise="浅青绿色"
sdxColorLightYellow="浅黄色"
sdxColorLime="浅绿色"
sdxColorOliveGreen="橄榄绿色"
sdxColorOrange="桔黄色"
sdxColorPaleBlue="淡蓝色"
sdxColorPickerAlphaLabel="A:"
sdxColorPickerBlueLabel="B:"
sdxColorPickerGreenLabel="G:"
sdxColorPickerHexCodeLabel="#"
sdxColorPickerHueLabel="H:"
sdxColorPickerLightnessLabel="L:"
sdxColorPickerRedLabel="R:"
sdxColorPickerSaturationLabel="S:"
sdxColorPink="粉红色"
sdxColorPlum="梅红色"
sdxColorRed="红色"
sdxColorRose="玫瑰红"
sdxColors="颜色"
sdxColorSeaGreen="海绿色"
sdxColorSkyBlue="天蓝色"
sdxColorTan="棕黄色"
sdxColorTeal="青色"
sdxColorTurquoise="青绿色"
sdxColorViolet="紫色"
sdxColorWhite="白色"
sdxColorYellow="黄色"
sdxColumnFields="列字段(&C)"
sdxColumnHeaders="列标题(&C)"
sdxColumnHeadersOnEveryPage="列标题(&H)"
sdxCompany1="Jennie Inc."
sdxCompany2="Daimler-Chrysler AG"
sdxCompanyCaption="公司"
sdxCompanyName="公司名称"
sdxComponentAlreadyExists="名为"%s"的组件已存在"
sdxComponentNotAssigned="%s不能分配"Component"属性"
sdxComponentNotSupported="TdxComponentPrinter不支持组件"%s""
sdxComponentNotSupportedByLink="TdxComponentPrinter不支持组件"%s""
sdxComposition="组件"
sdxCompositionDesignerCaption="组件编辑器"
sdxCompositionStartEachItemFromNewPage="每一项从新的一页开始(&S)"
sdxConditionalFormattingCellIsRuleComparisonOperatorNotEqual="不等于"
sdxConditionalFormattingRuleEditDialogButtonCancel="取消"
sdxConditionalFormattingRuleEditDialogButtonOk="确定"
sdxConditionalFormattingRuleEditDialogScaleMaxStop="最大值"
sdxConditionalFormattingRuleEditDialogScaleMidStop="中点"
sdxConditionalFormattingRuleEditDialogScaleMinStop="最小值"
sdxConditionalFormattingRuleEditDialogScaleValueTypeFormula="公式"
sdxConditionalFormattingRuleEditDialogScaleValueTypeValue="值"
sdxConditionalFormattingRulesManagerDialogButtonCancel="取消"
sdxConditionalFormattingRulesManagerDialogButtonOk="确定"
sdxConditionalFormattingRulesManagerDialogColumnFormat="格式"
sdxConditionalFormattingRulesManagerDialogDisplayModeSheet="页"
sdxConfidential="机密"
sdxConfirmDeleteItem="要删除下一个项目： %s 吗 ？"
sdxConfirmOverWrite="文件"%s"已存在。是否覆盖 ？"
sdxConsumeSelectionStyle="忽略选区样式"
sdxContainerCustomizationDialogButtonAdd="增加(&A)"
sdxContainerCustomizationDialogButtonCancel="取消"
sdxContainerCustomizationDialogButtonColor="颜色(&C)"
sdxContainerCustomizationDialogButtonLoad="加载(&L)"
sdxContainerCustomizationDialogButtonOK="确定"
sdxContainerCustomizationDialogButtonRemove="移除(&V)"
sdxContainerCustomizationDialogButtonSave="保存(&S)"
sdxContainerCustomizationDialogCaption="自定义对象"
sdxContainerCustomizationDialogCropLeft="左(&L):"
sdxContainerCustomizationDialogCropRight="右(&G):"
sdxContainerCustomizationDialogCropTop="上(&P):"
sdxContainerCustomizationDialogDirection="方向(&D):"
sdxContainerCustomizationDialogGradientFill="渐变填充(&G)"
sdxContainerCustomizationDialogGradientLine="渐变线(&G)"
sdxContainerCustomizationDialogGroupFill="填充"
sdxContainerCustomizationDialogGroupProperties="属性"
sdxContainerCustomizationDialogGroupSize="尺寸"
sdxContainerCustomizationDialogHeight="高度(&E):"
sdxContainerCustomizationDialogLine="线条"
sdxContainerCustomizationDialogLineStyle="风格(&S):"
sdxContainerCustomizationDialogLineWidth="宽度(&W):"
sdxContainerCustomizationDialogLockAspectRatio="固定伸缩比例(&A)"
sdxContainerCustomizationDialogNoFill="不填充(&N)"
sdxContainerCustomizationDialogNoLine="无(&N)"
sdxContainerCustomizationDialogOriginalSize="原始尺寸"
sdxContainerCustomizationDialogOriginalSizeFormatString="宽度:%d, 高度: %d"
sdxContainerCustomizationDialogPositioning="位置"
sdxContainerCustomizationDialogReset="重置(&S)"
sdxContainerCustomizationDialogRotation="旋转(&T):"
sdxContainerCustomizationDialogScale="比例"
sdxContainerCustomizationDialogScaleHeight="高度(&W):"
sdxContainerCustomizationDialogScaleWidth="高度(&W):"
sdxContainerCustomizationDialogSizeAndRotate="尺寸和角度"
sdxContainerCustomizationDialogSolidLine="实线(&S)"
sdxContainerCustomizationDialogStops="停止:"
sdxContainerCustomizationDialogTextBoxCaption="文本框"
sdxContainerCustomizationDialogTextCaption="文本"
sdxContainerCustomizationDialogWidth="宽度(&D):"
sdxContainers="容器(&O)"
sdxContentEvenStyle="偶数行"
sdxContentOddStyle="奇数行"
sdxContentStyle="内容"
sdxContinuedMessage="继续"
sdxControls="控件(&C)"
sdxControlsPlace="控件的地方"
sdxControlsTab="控件"
sdxCopy="复制(&C)"
sdxCopyOfItem="副本 "\r\\n总部"
sdxCountCaption="数量"
sdxCountIs="数量：%d"
sdxCreatedBy="创建由 "
sdxCreatedOn="创建在 "
sdxCreateNewStyleQueryNamePrompt="输入新样式表名: "
sdxCreationDate="已创建(&D):"
sdxCreator="作者(&R):"
sdxCrossFillPattern="交叉"
sdxCurrentDocumentHyperlinkTooltip="当前文档"
sdxCurrentRecord="当前记录"
sdxCustom="自定义"
sdxCustomColorText="自定义..."
sdxCustomSize="自定义大小"
sdxCyclicIDReferences="循环ID引用 %s 与 %s"
sdxDashDotDotEdgePattern="短画线-点-点"
sdxDashDotEdgePattern="短画线-点"
sdxDashedEdgePattern="短画线"
sdxDataFields="数据字段(&D)"
sdxDataLoadErrorText="不能加载报表数据"
sdxDataProviderDontPresent="没有与指定组件构成中的链接"
sdxDataToPrintDoesNotExist="不能激活报表连接，因为没有内容可以打印。"
sdxDateTimeWheelPickerHours="小时"
sdxDateTimeWheelPickerMinutes="分钟"
sdxDateTimeWheelPickerSeconds="秒"
sdxDay="天"
sdxDBBasedExplorerItemDataLoadError="不能加载报表数据。 \n数据可能被损坏或者被锁定。"
sdxDecember="十二月"
sdxDecemberShort="十二月"
sdxDefaultToggleSwitchOffText="关"
sdxDefaultToggleSwitchOnText="开"
sdxDefaultTray="默认纸盒"
sdxDefinePrintStylesCaption="定义打印样式"
sdxDefinePrintStylesMenuItem="定义打印样式(&S)..."
sdxDefinePrintStylesTitle="打印样式(&S):"
sdxDefinePrintStylesWarningClear="要删除所有非内置样式吗 ？"
sdxDefinePrintStylesWarningDelete="是否删除"%s" ？"
sdxDeleteFolderMessageText="删除文件夹"%s" ？"
sdxDeleteItemMessageText="删除项"%s" ？"
sdxDeleteNonEmptyFolderMessageText="文件夹"%s"不是空的。是否仍要删除？"
sdxDeleteStyleSheet="删除样式表"%s"？"
sdxDepth="浓度(&D):"
sdxDescription="描述(&D):"
sdxDetails="详细信息(&D)"
sdxDeviceOnPort="%s 在 %s 上"
sdxDiagCrossFillPattern="反交叉"
sdxDiagonalCrossHatchFillPattern="对角线剖面线"
sdxDiagonalStripeFillPattern="对角线条纹"
sdxDisplayGraphicsAsText="用文本形式显示图形(&T)"
sdxDisplayTrackBarsAsText="为文本显示跟踪栏(&B)"
sdxDottedEdgePattern="圆点"
sdxDoubleLineEdgePattern="双线"
sdxDownThenOver="下，然后结束(&D)"
sdxDrawBorder="绘制边框(&D)"
sdxDrawMode="绘制模式(&M):"
sdxDrawModeBorrow="从源借用"
sdxDrawModeChess="国际象棋模式"
sdxDrawModeOddEven="奇/偶行模式"
sdxDrawModeStrict="精确"
sdxDTFormatsAutoUpdate="自动更新(&U)"
sdxDTFormatsAvailableDateFormats="有效的日期格式(&A):"
sdxDTFormatsAvailableTimeFormats="有效的时间格式(&T):"
sdxDTFormatsCaption="日期与时间"
sdxDTFormatsChangeDefaultFormat="是否改变默认日期和时间格式来匹配"%s"  - "%s" ？"
sdxEast="东方"
sdxEditDescription="编辑描述"
sdxEditReports="编辑报表"
sdxEllipse="椭圆"
sdxEnable="启用(&E)"
sdxEndEllipsis="结束省略符(&E)"
sdxEndUserProgrammers="GUI开发人员"
sdxENFNCaption="选择新文件名称"
sdxEngineering="工程技术部"
sdxEnterAutoTextEntriesHere=" 输入自动图文集(&U): "
sdxEnterNewFileName="输入新文件名称"
sdxEnv="环境"
sdxErrorCannotMoveBecauseOfMergedCells="合并单元格仅保留左上角的值,而放弃其它值"
sdxErrorCannotRenameSheet="不能将一张表重命名为与现有表相同的名称."
sdxErrorCellProtected="您试图更改的单元格受到保护，因此是只读的."
sdxErrorDefinedNameAlreadyExists="名称重复了: "%s" "
sdxErrorDocumentIsCorrupted="文档已经损坏"
sdxErrorInternal="内部错误: "%s""
sdxErrorUnsupportedDocumentFormat="不支持的文件格式"
sdxErrorUnsupportedSheetType="不支持该Sheet类型"
sdxEvenColor="偶数行颜色(&V)："
sdxEvenFont="偶数行字体"
sdxExpandAll="全部展开(&X)"
sdxExpandButtons="展开按钮(&X)"
sdxExpandedGroups="展开组"
sdxExpandHeight="展开高度"
sdxExpanding="展开"
sdxExpandLevel="展开层级(&L):"
sdxExpandWidth="展开宽度"
sdxExplicitlyExpandNodes="显式扩展节点"
sdxExplorerBar="资源管理器"
sdxExplorerCaption="资源管理器"
sdxExplorerRootFolderCaption="根"
sdxExplorerToolBar="资源管理器"
sdxExtendedSelect="扩展选定(&E)"
sdxFalse="False"
sdxFDiagonalFillPattern="对角线"
sdxFebruary="二月"
sdxFebruaryShort="二月"
sdxFEFCaption="填充效果"
sdxFieldOfficeCanada="外地办事处:\r\\n加拿大"
sdxFileAlreadyExists="文件"%s"已存在。"
sdxFileBasedExplorerItemDataLoadError="不能加载报表数据。 \n文件可能损坏或者被另一用户或程序锁定。"
sdxFileName="文件名 "
sdxFileNameAndPath="文件名称和路径 "
sdxFilterBar="过滤栏(&F)"
sdxFilterBarStyle="过滤栏"
sdxFindAndReplaceDialogColumnSheetCaption="页"
sdxFindAndReplaceDialogWithinRangeSheet="页"
sdxFindAndReplaceDialogWithinRangeSpreadsheet="Excel"
sdxFinishLabelCaption="结束:"
sdxFiterFields="过滤字段(&F)"
sdxFitTo="适合(&F):"
sdxFixedColor="固定颜色(&I):"
sdxFixedHorzLines="固定水平线(&X)"
sdxFixedRowOnEveryPage="固定每页行数"
sdxFixedTransparent="固定透明(&X)"
sdxFixedVertLines="固定垂直线(&D)"
sdxFlatCheckMarks="平面检查框(&L)"
sdxFloatingObjectLayoutFormDialog="布局"
sdxFloatingObjectLayoutFormDialogBottom="下(&M)"
sdxFloatingObjectLayoutFormDialogButtonReset="重置(&S)"
sdxFloatingObjectLayoutFormDialogDistance="到文字的距离"
sdxFloatingObjectLayoutFormDialogHeight="高度"
sdxFloatingObjectLayoutFormDialogHeightAbsolute="绝对(&E):"
sdxFloatingObjectLayoutFormDialogHorizontal="水平"
sdxFloatingObjectLayoutFormDialogHorizontalAbsolutePosition="右侧的(&T)"
sdxFloatingObjectLayoutFormDialogHorizontalAbsolutePositionItem="绝对位置(&P)"
sdxFloatingObjectLayoutFormDialogHorizontalAlignmentItem="对齐(&A)"
sdxFloatingObjectLayoutFormDialogHorizontalPositionType="相对于(&R)"
sdxFloatingObjectLayoutFormDialogLeft="左(&E)"
sdxFloatingObjectLayoutFormDialogLock="锁定标记(&L)"
sdxFloatingObjectLayoutFormDialogLockAspectRatio="锁定纵横比(&A)"
sdxFloatingObjectLayoutFormDialogOptions="选项"
sdxFloatingObjectLayoutFormDialogOriginalSize="原始大小"
sdxFloatingObjectLayoutFormDialogOriginalSizeHeight="高度:"
sdxFloatingObjectLayoutFormDialogOriginalSizeWidth="宽度:"
sdxFloatingObjectLayoutFormDialogPresetControlBehind="在文本后面(&B)"
sdxFloatingObjectLayoutFormDialogPresetControlInFrontOf="在文本前面(&F)"
sdxFloatingObjectLayoutFormDialogPresetControlSquare="正方(&Q)"
sdxFloatingObjectLayoutFormDialogPresetControlThought="穿过(&H)"
sdxFloatingObjectLayoutFormDialogPresetControlTight="紧密(&T)"
sdxFloatingObjectLayoutFormDialogPresetControlTopAndBottom="顶部和底部(&O)"
sdxFloatingObjectLayoutFormDialogRight="右(&G)"
sdxFloatingObjectLayoutFormDialogRotate="旋转"
sdxFloatingObjectLayoutFormDialogRotation="旋转(&T):"
sdxFloatingObjectLayoutFormDialogScale="比例"
sdxFloatingObjectLayoutFormDialogTabPagePosition="位置"
sdxFloatingObjectLayoutFormDialogTabPageSize="尺寸"
sdxFloatingObjectLayoutFormDialogTabPageTextWrapping="自动换行"
sdxFloatingObjectLayoutFormDialogTextWrapSideBothSides="双方(&S)"
sdxFloatingObjectLayoutFormDialogTextWrapSideLargestOnly="仅大的(&A)"
sdxFloatingObjectLayoutFormDialogTextWrapSideLeftOnly="仅左边(&L)"
sdxFloatingObjectLayoutFormDialogTextWrapSideRightOnly="仅右边(&R)"
sdxFloatingObjectLayoutFormDialogTop="上(&P)"
sdxFloatingObjectLayoutFormDialogVertical="垂直"
sdxFloatingObjectLayoutFormDialogVerticalAbsolutePosition="下面(&W)"
sdxFloatingObjectLayoutFormDialogVerticalAbsolutePositionItem="绝对位置(&S)"
sdxFloatingObjectLayoutFormDialogVerticalAlignmentItem="对齐(&G)"
sdxFloatingObjectLayoutFormDialogVerticalPositionType="相对于(&E)"
sdxFloatingObjectLayoutFormDialogWidth="宽度"
sdxFloatingObjectLayoutFormDialogWidthAbsolute="绝对(&B):"
sdxFloatingObjectLayoutFormDialogWrappingStyle="自动换行"
sdxFloatingObjectLayoutFormDialogWrapText="自动换行"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionAlignmentCenter="中间"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionAlignmentLeft="左"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionAlignmentRight="右"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypeCharacter="字符"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypeColumn="列"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypeInsideMargin="内部边界"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypeLeftMargin="左边界"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypeMargin="边界"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypeOutsideMargin="外部边界"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypePage="页面"
sdxFloatingObjectLayoutOptionsForm_HorizontalPositionTypeRightMargin="右边界"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionAlignmentBottom="下"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionAlignmentCenter="中间"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionAlignmentInside="内部"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionAlignmentOutside="外部"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionAlignmentTop="上"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypeBottomMargin="下边距"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypeInsideMargin="内部边界"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypeLine="行"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypeMargin="页边空白"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypeOutsideMargin="外部边界"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypePage="页面"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypeParagraph="段落"
sdxFloatingObjectLayoutOptionsForm_VerticalPositionTypeTopMargin="上边距"
sdxFlowChartArrowStyleArrow="箭头"
sdxFlowChartArrowStyleEllipseArrow="椭圆箭头"
sdxFlowChartArrowStyleNone="无"
sdxFlowChartArrowStyleRectArrow="矩形箭头"
sdxFlowChartBorderStyleAdjust="调整"
sdxFlowChartBorderStyleBottom="下"
sdxFlowChartBorderStyleDiagonal="对角线"
sdxFlowChartBorderStyleFlat="平面"
sdxFlowChartBorderStyleLeft="左"
sdxFlowChartBorderStyleMiddle="居中"
sdxFlowChartBorderStyleMono="单一"
sdxFlowChartBorderStyleRight="右"
sdxFlowChartBorderStyleSoft="软"
sdxFlowChartBorderStyleTop="上"
sdxFlowChartConnectionEditorArrowColor="箭头颜色"
sdxFlowChartConnectionEditorArrowSize="箭头大小"
sdxFlowChartConnectionEditorArrowStyle="箭头样式"
sdxFlowChartConnectionEditorCaption="编辑链接"
sdxFlowChartConnectionEditorColor="颜色"
sdxFlowChartConnectionEditorDestination="目标"
sdxFlowChartConnectionEditorLinkedPoint="链接点"
sdxFlowChartConnectionEditorSource="来源"
sdxFlowChartConnectionEditorText="文本"
sdxFlowChartConnectionEditorTextFontHint="文本字体"
sdxFlowChartConnectionStyleCurved="曲线"
sdxFlowChartConnectionStyleRectHorizontal="矩形水平"
sdxFlowChartConnectionStyleRectVertical="矩形垂直"
sdxFlowChartConnectionStyleStraight="直"
sdxFlowChartDialogButtonCancel="取消(&C)"
sdxFlowChartDialogButtonOk="确定(&O)"
sdxFlowChartEdgeStyleRaisedIn="凸进"
sdxFlowChartEdgeStyleRaisedOut="凸出"
sdxFlowChartEdgeStyleSunkenIn="凹进"
sdxFlowChartEdgeStyleSunkenOut="凹出"
sdxFlowChartEditorChildItem="%s 的子项目"
sdxFlowChartEditorConnection="连接"
sdxFlowChartEditorConnectionArrowDestinationHint="目标箭头"
sdxFlowChartEditorConnectionArrowDestinationSizeHint="目标箭头大小"
sdxFlowChartEditorConnectionArrowSourceHint="源箭头"
sdxFlowChartEditorConnectionArrowSourceSizeHint="源箭头大小"
sdxFlowChartEditorConnectionLinkedPointDestinationHint="链接的目标点的对象"
sdxFlowChartEditorConnectionLinkedPointSourceHint="链接的点源对象"
sdxFlowChartEditorConnectionStyleHint="线条样式"
sdxFlowChartEditorConnectionTextFontHint="文本字体"
sdxFlowChartEditorCreate="创建"
sdxFlowChartEditorCreateConnectionHint="链接"
sdxFlowChartEditorCreateObjectHint="对象"
sdxFlowChartEditorEdit="编辑(&E)"
sdxFlowChartEditorEditBringToFront="置前(&F)"
sdxFlowChartEditorEditClearSelection="取消选择(&E)"
sdxFlowChartEditorEditCopy="复制(&C)"
sdxFlowChartEditorEditCut="剪切(&T)"
sdxFlowChartEditorEditDelete="删除(&D)"
sdxFlowChartEditorEditPaste="粘贴(&P)"
sdxFlowChartEditorEditSelectAll="全选(&L)"
sdxFlowChartEditorEditSendToBack="置后(&B)"
sdxFlowChartEditorEditUndo="撤销(&U)"
sdxFlowChartEditorFile="文件(&F)"
sdxFlowChartEditorFileOpen="打开(&O)"
sdxFlowChartEditorFileSave="另存为(&A)..."
sdxFlowChartEditorFitHint="合适"
sdxFlowChartEditorHelp="帮助(&H)"
sdxFlowChartEditorHelpContents="内容(&C)"
sdxFlowChartEditorMainItemOfUnion="%d 联合的主要项目"
sdxFlowChartEditorObject="对象"
sdxFlowChartEditorObjectImagePositionHint="图像位置"
sdxFlowChartEditorObjectLineWidthHint="线宽"
sdxFlowChartEditorObjectShapeStyleHint="形状样式"
sdxFlowChartEditorObjectTextFontHint="文本字体"
sdxFlowChartEditorObjectTextPositionHint="文本位置"
sdxFlowChartEditorOptions="选项(&O)"
sdxFlowChartEditorOptionsDynamicMoving="动态移动(&M)"
sdxFlowChartEditorOptionsDynamicSizing="动态调整大小(&S)"
sdxFlowChartEditorPixels="%d 像素。"
sdxFlowChartEditorPoint="%d 点"
sdxFlowChartEditorProperties="属性(&P)"
sdxFlowChartEditorUnions="联合(&U)"
sdxFlowChartEditorUnionsAdd="添加到联合"
sdxFlowChartEditorUnionsClear="清除联合"
sdxFlowChartEditorUnionsClearAll="清除所有联合"
sdxFlowChartEditorUnionsNew="新建联合"
sdxFlowChartEditorUnionsRemove="从联合中删除"
sdxFlowChartEditorView="视图(&V)"
sdxFlowChartEditorViewActualSize="实际尺寸(&A)"
sdxFlowChartEditorViewAntialiasing="消除锯齿(&A)"
sdxFlowChartEditorViewFit="合适(&F)"
sdxFlowChartEditorViewZoomIn="放大(&I)"
sdxFlowChartEditorViewZoomOut="缩小(&O)"
sdxFlowChartEditorZoomHint="缩放"
sdxFlowChartLayoutBottom="下"
sdxFlowChartLayoutBottomLeft="左下角"
sdxFlowChartLayoutBottomRight="右下角"
sdxFlowChartLayoutCenter="居中"
sdxFlowChartLayoutLeft="左"
sdxFlowChartLayoutRight="右"
sdxFlowChartLayoutTop="上"
sdxFlowChartLayoutTopLeft="左上角"
sdxFlowChartLayoutTopRight="右上角"
sdxFlowChartObjectEditorBackgroundColor="背景颜色"
sdxFlowChartObjectEditorBorderStyle="边框样式"
sdxFlowChartObjectEditorCaption="编辑对象"
sdxFlowChartObjectEditorEdgeStyle="边缘样式"
sdxFlowChartObjectEditorFrameTab="框架"
sdxFlowChartObjectEditorGeneralTab="常规"
sdxFlowChartObjectEditorHeight="高"
sdxFlowChartObjectEditorImageClear="清除图像"
sdxFlowChartObjectEditorImageLayout="图像布局"
sdxFlowChartObjectEditorImageTab="图像"
sdxFlowChartObjectEditorLineWidth="线宽"
sdxFlowChartObjectEditorShapeColor="形状颜色"
sdxFlowChartObjectEditorShapeType="形状类型"
sdxFlowChartObjectEditorText="文本"
sdxFlowChartObjectEditorTextLayout="文本布局"
sdxFlowChartObjectEditorTransparent="透明"
sdxFlowChartObjectEditorWidth="宽"
sdxFlowChartShapeTypeDiamond="菱形"
sdxFlowChartShapeTypeEastTriangle="向东三角形"
sdxFlowChartShapeTypeEllipse="椭圆"
sdxFlowChartShapeTypeHexagon="六边形"
sdxFlowChartShapeTypeNone="无"
sdxFlowChartShapeTypeNorthTriangle="向北三角形"
sdxFlowChartShapeTypeRect="矩形"
sdxFlowChartShapeTypeRoundRect="圆角矩形"
sdxFlowChartShapeTypeSouthTriangle="南三角"
sdxFlowChartShapeTypeWestTriangle="西三角"
sdxFlowChartUnion="联合"
sdxFlowChartUnionEditorCaption="选择联合"
sdxFlowChartUnions="联合"
sdxFont="字体"
sdxFontColor="字体颜色"
sdxFonts="字体"
sdxFontStyleBold="粗体"
sdxFontStyleBoldItalic="粗斜体"
sdxFontStyleItalic="斜体"
sdxFontStyleRegular="常规"
sdxFontStyleStrikeOut="删除线"
sdxFontStyleUnderline="下划线"
sdxFooter="页脚 "
sdxFooter2="页脚(&R):"
sdxFooterColor="页脚颜色(&T):"
sdxFooterFont="页脚字体"
sdxFooterMargin="页脚"
sdxFooterRowStyle="页脚行"
sdxFooters="页脚(&R)"
sdxFootersOnEveryPage="页脚"
sdxFooterStyle="页脚"
sdxFootnotesModeNone="无"
sdxFootnotesModeOnEveryBottomPage="在每个页面的底部"
sdxFootnotesModeOnLastPage="最后一页"
sdxForeground="前景(&F)"
sdxFormatCellsDialogAuto="自动"
sdxFormatCellsDialogBackgroundColor="背景色(&C):"
sdxFormatCellsDialogBorder="边框"
sdxFormatCellsDialogBorderInside="内部(&I)"
sdxFormatCellsDialogBorderLine="线条"
sdxFormatCellsDialogBorderLineColor="颜色(&C):"
sdxFormatCellsDialogBorderLineStyle="风格(&S):"
sdxFormatCellsDialogBorderNone="无边框(&N)"
sdxFormatCellsDialogBorderOutline="外边框(&O)"
sdxFormatCellsDialogBorderPresets="预置"
sdxFormatCellsDialogBordersHint="单击预置选项、预览草图以及上面的按钮可以添加边框样式"
sdxFormatCellsDialogButtonCancel="取消"
sdxFormatCellsDialogButtonColorAuto="自动"
sdxFormatCellsDialogButtonOK="确定"
sdxFormatCellsDialogButtonResetFont="重置(&R)"
sdxFormatCellsDialogCaption="格式化单元格"
sdxFormatCellsDialogCategory="分类(&C):"
sdxFormatCellsDialogCategoryAccounting="会计专用"
sdxFormatCellsDialogCategoryAccountingDescription="会计格式可对一列数值进行货币符号和小数点对齐。"
sdxFormatCellsDialogCategoryCurrency="货币"
sdxFormatCellsDialogCategoryCurrencyDescription="货币格式用于表示一般货币数值。会计格式可以对一列数值进行小数点对齐。"
sdxFormatCellsDialogCategoryCustom="自定义"
sdxFormatCellsDialogCategoryCustomDescription="以现有格式为基础，生成自定义的数字格式。"
sdxFormatCellsDialogCategoryDate="日期"
sdxFormatCellsDialogCategoryDateDescription="日期格式将日期和时间系列数值显示为日期值。"
sdxFormatCellsDialogCategoryFraction="分数"
sdxFormatCellsDialogCategoryGeneral="常规"
sdxFormatCellsDialogCategoryGeneralNotes="常规单元格格式不包含任何特定的数字格式。"
sdxFormatCellsDialogCategoryNumber="数值"
sdxFormatCellsDialogCategoryNumberDescription="数值格式用于一般数字的表示。货币和会计格式则提供货币值计算的专用格式。"
sdxFormatCellsDialogCategoryPercentage="百分比"
sdxFormatCellsDialogCategoryPercentageDescription="百分比格式将单元格中数值乘以100，并以百分数形式显示。"
sdxFormatCellsDialogCategoryScientific="科学计算"
sdxFormatCellsDialogCategoryText="文本"
sdxFormatCellsDialogCategoryTextNotes="在文本单元格格式中，数字作为文本处理。单元格显示的内容与输入的内容完全一致。"
sdxFormatCellsDialogCategoryTime="时间"
sdxFormatCellsDialogCategoryTimeDescription="时间格式将日期和时间系列数值显示为时间值。"
sdxFormatCellsDialogCustomCode="类型(&T):"
sdxFormatCellsDialogDecimalPlaces="小数位数(&D):"
sdxFormatCellsDialogFill="填充"
sdxFormatCellsDialogFont="字体"
sdxFormatCellsDialogFontColor="颜色(&C):"
sdxFormatCellsDialogFontName="字体(&F):"
sdxFormatCellsDialogFontNotInstalled="系统上尚未安装该字体。"
sdxFormatCellsDialogFontPreview="预览"
sdxFormatCellsDialogFontPrintNotes="这是TrueType字体。同一种字体将在屏幕和打印机上同时使用。"
sdxFormatCellsDialogFontSize="尺寸(&S):"
sdxFormatCellsDialogFontStrikethrough="删除线(&K)"
sdxFormatCellsDialogFontStyle="字体风格(&O):"
sdxFormatCellsDialogFontUnderline="下划线(&U):"
sdxFormatCellsDialogGroupFontEffects="特殊效果"
sdxFormatCellsDialogGroupNumber="数值"
sdxFormatCellsDialogGroupTextAlignment="对齐"
sdxFormatCellsDialogHidden="隐藏(&I)"
sdxFormatCellsDialogLocked="锁定(&L)"
sdxFormatCellsDialogMergeCells="合并单元格(&M)"
sdxFormatCellsDialogMoreColors="更多颜色(&M)..."
sdxFormatCellsDialogNoColor="无颜色"
sdxFormatCellsDialogNone="无"
sdxFormatCellsDialogNumberFormatTemplates="类型(&T):"
sdxFormatCellsDialogPatternColor="图案颜色(&A):"
sdxFormatCellsDialogPatternStyle="图案风格(&P):"
sdxFormatCellsDialogPreviewText="文本"
sdxFormatCellsDialogProtection="保护"
sdxFormatCellsDialogProtectionNotes="只有保护工作表后，锁定单元格或隐藏公式才有效果"
sdxFormatCellsDialogSample="示例"
sdxFormatCellsDialogShrinkToFit="缩小字体填充(&K)"
sdxFormatCellsDialogTextAlignHorz="水平(&H):"
sdxFormatCellsDialogTextAlignHorzIndent="缩进(&I):"
sdxFormatCellsDialogTextAlignment="文本"
sdxFormatCellsDialogTextAlignVert="垂直(&V):"
sdxFormatCellsDialogTextControl="文本控制"
sdxFormatCellsDialogUnderlineNode="无"
sdxFormatCellsDialogUnderlineSingle="单一下划线"
sdxFormatCellsDialogUseThousandSeparator="使用千分位 (%s)"
sdxFormatCellsDialogWrapText="自动换行(&W)"
sdxFormatting="正在格式化"
sdxFourPages="四页"
sdxFraming="框架"
sdxFSPCaption="图像预览"
sdxFullExpand="完全展开(&E)"
sdxGigaBytes="GB"
sdxGradientModeBackwardDiagonal="方向对角线"
sdxGradientModeForwardDiagonal="正向对角线"
sdxGradientModeHorizontal="水平"
sdxGradientModeVertical="垂直"
sdxGraphicAsTextValue="(图像)"
sdxGraphics="图形(&G)"
sdxGray125FillPattern="12.5% 灰色"
sdxGray25FillPattern="25% 灰色"
sdxGray50FillPattern="50% 灰色"
sdxGray625FillPattern="6.25% 灰色"
sdxGray75FillPattern="75% 灰色"
sdxGrid="网格线"
sdxGridLinesColor="网格线颜色(&D):"
sdxGroupColor="组颜色(&P):"
sdxGroupFooterColor="组脚颜色(&G):"
sdxGroupFooterFont="组脚字体"
sdxGroupFooterGrid="组脚网格线"
sdxGroupFooters="分组页脚(&G)"
sdxGroupImages="图像"
sdxGroupNodeColor="组节点颜色(&N):"
sdxGroupNodeFont="组节点字体"
sdxGroups="组(&G)"
sdxGroupStyle="分组"
sdxGroupTransparent="组透明"
sdxGroupView="视图"
sdxGutterMargin="装订线"
sdxHairEdgePattern="丝状"
sdxHalf="一半"
sdxHeader="页眉 "
sdxHeader2="页眉(&E):"
sdxHeaderColor="标题颜色(&E):"
sdxHeaderFont="页眉字体"
sdxHeaderFooter="页眉和页脚(&H)"
sdxHeaderFooterBar="页眉和页脚"
sdxHeaderMargin="页眉"
sdxHeaders="页眉(&E)"
sdxHeadersOnEveryPage="页眉"
sdxHeadersTransparent="标题透明(&H)"
sdxHeaderStyle="页眉"
sdxHeight="高"
sdxHFFunctionHintDate="打印日期"
sdxHFFunctionHintDateTime="打印日期和时间"
sdxHFFunctionHintImage="图像"
sdxHFFunctionHintMachineName="机器名称"
sdxHFFunctionHintPageNumber="页码"
sdxHFFunctionHintPageOfPages="第 # 页 共 # 页"
sdxHFFunctionHintTime="打印时间"
sdxHFFunctionHintTotalPages="总页数"
sdxHFFunctionHintUserName="用户名"
sdxHFFunctionNameDate="日期"
sdxHFFunctionNameDateTime="日期与时间"
sdxHFFunctionNameImage="图像"
sdxHFFunctionNameMachineName="机器名称"
sdxHFFunctionNamePageNumber="页码"
sdxHFFunctionNamePageOfPages="第 # 页 共 # 页"
sdxHFFunctionNameTime="时间"
sdxHFFunctionNameTotalPages="总页数"
sdxHFFunctionNameUnknown="未知"
sdxHFFunctionNameUserName="用户名"
sdxHFFunctionTemplateDate="打印日期"
sdxHFFunctionTemplateDateTime="打印日期和时间"
sdxHFFunctionTemplateImage="图像"
sdxHFFunctionTemplateMachineName="机器名称"
sdxHFFunctionTemplatePageNumber="第 # 页"
sdxHFFunctionTemplatePageOfPages="第 # 页 共 # 页"
sdxHFFunctionTemplateTime="打印时间"
sdxHFFunctionTemplateTotalPages="总页数"
sdxHFFunctionTemplateUserName="用户名"
sdxHiddenControlsTab="可用控件"
sdxHideAlreadyIncludedItems="隐藏已包含项目(&I)"
sdxHideCustomContainers="隐藏自定义容器(&H)"
sdxHideDetailsOfPrivateAppointments="隐藏私有约会的细节(&H)"
sdxHighLight="加亮"
sdxHintActivePage="当前页"
sdxHintDoubleClickForChangeMargins="双击改变页边距"
sdxHintDoubleClickForChangePaperSize="双击改变纸张大小"
sdxHintEditFind="查找"
sdxHintEditFindNext="查找下一个"
sdxHintEditReplace="替换"
sdxHintExplorerChangeRootPath="设置根路径"
sdxHintExplorerCreateFolder="新建文件夹"
sdxHintExplorerDelete="删除"
sdxHintExplorerGoToUpOneLevel="上一层"
sdxHintExplorerProperties="属性"
sdxHintExplorerRefresh="刷新"
sdxHintExplorerRename="重命名"
sdxHintExplorerSetAsRoot="设当前路径为根路径"
sdxHintExportToPDF="输出PDF格式"
sdxHintFileClose="关闭报表"
sdxHintFileDesign="设计报表"
sdxHintFileExit="关闭预览"
sdxHintFileLoad="打开报表"
sdxHintFilePageSetup="页面设置"
sdxHintFilePrint="打印"
sdxHintFilePrintDialog="打印对话框"
sdxHintFileSave="保存报表"
sdxHintFileSaveAs="另存报表"
sdxHintFormatDateTime="格式化日期和时间"
sdxHintFormatFootnotes="报表脚注格式…..."
sdxHintFormatHFBackground="页眉/页脚背景"
sdxHintFormatHFClear="清除页眉/页脚文本"
sdxHintFormatPageBackground="背景"
sdxHintFormatPageNumbering="格式化页码"
sdxHintFormatShrinkToPage="适应页宽"
sdxHintFormatTitle="格式化报表标题"
sdxHintGotoPageFirst="首页"
sdxHintGotoPageLast="尾页"
sdxHintGotoPageNext="下一页"
sdxHintGotoPagePrev="上一页"
sdxHintHelpAbout="关于"
sdxHintHelpTopics="帮助主题"
sdxHintInsertDate="插入日期"
sdxHintInsertDateTime="插入日期和时间"
sdxHintInsertEditAutoTextEntries="编辑自动图文集"
sdxHintInsertMachineName="插入机器名称"
sdxHintInsertPageNumber="插入页码"
sdxHintInsertPageOfPages="插入页码"
sdxHintInsertTime="插入时间"
sdxHintInsertTotalPages="插入页数"
sdxHintInsertUserName="插入用户名称"
sdxHintListViewDesignerMessage=" 在详细信息视图，只考虑到正在采取大多数选项"
sdxHintMoreHFFunctions="更多函数"
sdxHintThumbnailsLarge="切换为大缩略图"
sdxHintThumbnailsSmall="切换为小缩略图"
sdxHintToolsCustomize="自定义工具栏"
sdxHintToolsOptions="选项"
sdxHintViewExplorer="显示报表浏览器"
sdxHintViewHFClose="关闭"
sdxHintViewHFSwitchHeaderFooter="在页眉和页脚之间切换"
sdxHintViewLargeButtons="查看大按钮"
sdxHintViewMargins="查看页边距"
sdxHintViewMarginsStatusBar="查看页边距状态栏"
sdxHintViewPagesFooters="查看页脚"
sdxHintViewPagesHeaders="查看页眉"
sdxHintViewPagesStatusBar="查看页面状态栏"
sdxHintViewSwitchToCenterPart="切换到中间的页眉/页脚"
sdxHintViewSwitchToFooter="切换到页脚"
sdxHintViewSwitchToHeader="切换到页眉"
sdxHintViewSwitchToLeftPart="切换到左边的页眉/页脚"
sdxHintViewSwitchToRightPart="切换到右边的页眉/页脚"
sdxHintViewThumbnails="显示缩略图"
sdxHintViewZoom="缩放"
sdxHintZoomFourPages="四页"
sdxHintZoomMultiplyPages="多页"
sdxHintZoomPageWidth="页宽"
sdxHintZoomPercent100="百分100%"
sdxHintZoomSetup="设置缩放比例"
sdxHintZoomTwoPages="两页"
sdxHintZoomWholePage="整页"
sdxHintZoomWidenToSourceWidth="扩展到原始宽度"
sdxHorizontal="水平(&O):"
sdxHorizontalFillPattern="水平"
sdxHorizontally="水平(&Z)"
sdxHorizontalStripeFillPattern="水平条纹"
sdxHorzAlignCenter="水平居中"
sdxHorzAlignDistributed="分散对齐  (缩进)"
sdxHorzAlignFill="填充"
sdxHorzAlignGeneral="常规"
sdxHorzAlignJustify="两端对齐  （缩进)"
sdxHorzAlignLeft="靠左  (缩进)"
sdxHorzAlignRight="靠右  (缩进)"
sdxHorzLines="水平线(&Z)"
sdxHumanResourceDepartment="人力资源部门"
sdxHyperlinkEditorCancel="取消"
sdxHyperlinkEditorOK="确定"
sdxHyperlinkEditorSubject="主题:"
sdxImages="图像(&I)"
sdxIncludeFixed="包含固定区(&I)"
sdxInconsistentTrifoldStyle="三栏式需要至少一个日历部分。选择每日、 每周或每月的日历，在选项下的部分之一。"
sdxIncorrectBandHeadersState="不能使用BandHeaders OnEveryPage模式 \n \n你应该: \n  - 设置标题为OnEveryPage的选项为开 \n  -设置可见选项为关"
sdxIncorrectBandHeadersState2="不能使用BandHeaders OnEveryPage模式 \n \n你应该: \n  - 设置标题和过滤栏OnEveryPage选择为开 \n  - 设置标题和过滤栏可见属性为关"
sdxIncorrectFilterBarState="不能使用过滤栏OnEveryPage模式 \n \n你应该: \n  - 设置标题为OnEveryPage的选项为开 \n  -设置可见选项为关"
sdxIncorrectFootersState="不能使用页脚OnEveryPage模式 \n \n你应该: \n  - 设置过滤栏OnEveryPage选项为开 \n  -设置过滤栏可见选项为关"
sdxIncorrectHeadersState="不能使用也没OnEveryPage模式 \n \n你应该: \n  - 设置标题并绑定OnEveryPage选择为开 \n  - 设置标题并绑定可见属性为关"
sdxIncorrectHeadersState2="不能使用也没OnEveryPage模式 \n \n你应该: \n  -设置标题、过滤栏和带区OnEveryPage选项为开 \n  - 设置标题、过滤栏和带区可见选择为关"
sdxIndentStyle="缩进"
sdxInternalErrorAutoHide="自动隐藏控件时发生内部错误。"
sdxInternalErrorCreateLayout="创建%s对象布局时发生内部错误。"
sdxInternalErrorDestroyLayout="销毁%s对象布局时发生内部错误。"
sdxInternalErrorLayout="%s对象布局发生内部错误。"
sdxInternalErrorPainter="TdxCustomDockControl绘制器中的内部错误。"
sdxInvaldZoneOwner="不能在没有TdxCustomDockControl的情况下创建TdxZone。"
sdxInvalidComponentName=""%s"不是一个有效的组件名称"
sdxInvalidDockSiteParent="TdxDockSite的父组件不能是TdxCustomDockControl。"
sdxInvalideGroupControl="无效的导航分组父控件或分组。"
sdxInvalideStyleCaption="样式名称"%s"已经存在。请提供另一个名称。"
sdxInvalidExternalStorage="非法的外部存储"
sdxInvalidFileName="无效文件名"%s""
sdxInvalidFloatingDeleting="不能在浮动模式下删除TdxCustomDockSite。"
sdxInvalidFloatSiteDeleting="不能删除TdxFloatDockSite。"
sdxInvalidFloatSiteParent="TdxFloatDockSite的父组件只能是TdxFloatForm。"
sdxInvalidFolderName="无效文件夹名称"%s""
sdxInvalidLayoutSiteDeleting="不能删除TdxLayoutDockSite。"
sdxInvalidLink="不能创建"%s"项的链接，它存在"%s"分组中，因为他们属于不同的导航栏控件"
sdxInvalidMargins="一个或多个页边距是无效值"
sdxInvalidMarginsMessage=""
sdxInvalidOwner="TdxCustomDockControl的拥有者必须是TCustomForm。"
sdxInvalidPanelChild="不能将TdxCustomDockControl插入TdxDockPanel(%s 将被插入)。"
sdxInvalidParent="%s的父组件必须是TdxCustomDockControl。"
sdxInvalidParentAssigning="您不能为此组件设置父组件属性。"
sdxInvalidPrintDevice="所选打印机无效"
sdxInvalidReportName="无效报表名称"%s""
sdxInvalidRootDirectory="文件夹"%s"不存在，是否继续选择 ？"
sdxInvalidSiteChild="只能将TdxCustomDockControl插入TdxCustomDockSite(%s将被插入)。"
sdxInvalidStorageVersion="非法的存储版本: %d"
sdxIrregular="不规则"
sdxItem1Description=""
sdxItem1Name="圆柱"
sdxItem2Description="轴对称几何图形"
sdxItem2Name="圆锥"
sdxItem3Description="轴对称几何图形"
sdxItem3Name="棱锥"
sdxItem4Description="锐角几何图形"
sdxItem4Name="盒子"
sdxItem5Description=""
sdxItem5Name="自由表面"
sdxItem6Description=""
sdxItem7Description="简单挤压表面"
sdxItemDescription="描述"
sdxItemName="名称"
sdxItems="项(&I)"
sdxItemShapeAsText="(图形)"
sdxJanuary="一月"
sdxJanuaryShort="一月"
sdxJuly="七月"
sdxJulyShort="七月"
sdxJune="六月"
sdxJuneShort="六月"
sdxKeepSameHeight="保持同样高度(&H)"
sdxKeepSameRecordWidths="记录等宽(&K)"
sdxKeepSameWidth="保持同样宽度(&K)"
sdxKiloBytes="KB"
sdxLandscape="横向(&L)"
sdxLastPrinted="上次打印时间 "
sdxLayoutControlCollapseButtonHint="单击展开"
sdxLayoutControlContainerCannotBeControl="容器不能是其项目的控件。"
sdxLayoutControlControlIsUsed="%s 项目已经使用 %s 控件。"
sdxLayoutControlCustomizeFormAddAuxiliaryItem="添加辅助项目"
sdxLayoutControlCustomizeFormAddEmptySpaceItem="添加空白项目"
sdxLayoutControlCustomizeFormAddGroup="添加分组"
sdxLayoutControlCustomizeFormAddImageItem="添加图片项目"
sdxLayoutControlCustomizeFormAddItem="添加项目"
sdxLayoutControlCustomizeFormAddLabeledItem="添加文本标签项"
sdxLayoutControlCustomizeFormAddSeparatorItem="添加分隔条"
sdxLayoutControlCustomizeFormAddSplitterItem="添加拆分条项"
sdxLayoutControlCustomizeFormAlignBottomSide="下面"
sdxLayoutControlCustomizeFormAlignBy="对齐通过"
sdxLayoutControlCustomizeFormAlignLeftSide="左边"
sdxLayoutControlCustomizeFormAlignNone="无"
sdxLayoutControlCustomizeFormAlignRightSide="右边"
sdxLayoutControlCustomizeFormAlignTopSide="上面"
sdxLayoutControlCustomizeFormCaption="自定义"
sdxLayoutControlCustomizeFormCaptionAlignHorz="标题水平对齐"
sdxLayoutControlCustomizeFormCaptionAlignHorzCenter="居中"
sdxLayoutControlCustomizeFormCaptionAlignHorzLeft="左"
sdxLayoutControlCustomizeFormCaptionAlignHorzRight="右"
sdxLayoutControlCustomizeFormCaptionAlignVert="标题垂直对齐"
sdxLayoutControlCustomizeFormCaptionAlignVertBottom="下"
sdxLayoutControlCustomizeFormCaptionAlignVertCenter="居中"
sdxLayoutControlCustomizeFormCaptionAlignVertTop="上"
sdxLayoutControlCustomizeFormClose="关闭(&C)"
sdxLayoutControlCustomizeFormCollapseAll="全部折叠"
sdxLayoutControlCustomizeFormDelete="删除"
sdxLayoutControlCustomizeFormDeleteHint="删除 (Del)"
sdxLayoutControlCustomizeFormDirection="布局方向"
sdxLayoutControlCustomizeFormDirectionHorizontal="水平"
sdxLayoutControlCustomizeFormDirectionTabbed="标签页式"
sdxLayoutControlCustomizeFormDirectionVertical="垂直"
sdxLayoutControlCustomizeFormExpandAll="全部展开"
sdxLayoutControlCustomizeFormGroup="分组"
sdxLayoutControlCustomizeFormGroupBorder="边框"
sdxLayoutControlCustomizeFormGroupExpandButton="展开按钮"
sdxLayoutControlCustomizeFormHAlign="水平对齐"
sdxLayoutControlCustomizeFormHAlignCenter="居中"
sdxLayoutControlCustomizeFormHAlignClient="客户区"
sdxLayoutControlCustomizeFormHAlignLeft="左"
sdxLayoutControlCustomizeFormHAlignParent="父组件管理"
sdxLayoutControlCustomizeFormHAlignRight="右"
sdxLayoutControlCustomizeFormItemCaption="标题"
sdxLayoutControlCustomizeFormListViewGroup="可用项目(&A)"
sdxLayoutControlCustomizeFormRedo="重做"
sdxLayoutControlCustomizeFormRename="重命名"
sdxLayoutControlCustomizeFormRestore="恢复布局"
sdxLayoutControlCustomizeFormShowBorder="显示边框"
sdxLayoutControlCustomizeFormStore="存储布局"
sdxLayoutControlCustomizeFormTabbedView="标签页式视图(&T)"
sdxLayoutControlCustomizeFormTextPosition="标题位置"
sdxLayoutControlCustomizeFormTextPositionBottom="下"
sdxLayoutControlCustomizeFormTextPositionLeft="左"
sdxLayoutControlCustomizeFormTextPositionRight="右"
sdxLayoutControlCustomizeFormTextPositionTop="上"
sdxLayoutControlCustomizeFormTreeView="树状/平面列表浏览"
sdxLayoutControlCustomizeFormTreeViewGroup="树状视图布局(&L)"
sdxLayoutControlCustomizeFormUndo="撤销"
sdxLayoutControlCustomizeFormUngroup="取消分组"
sdxLayoutControlCustomizeFormVAlign="垂直对齐"
sdxLayoutControlCustomizeFormVAlignBottom="下"
sdxLayoutControlCustomizeFormVAlignCenter="居中"
sdxLayoutControlCustomizeFormVAlignClient="客户区"
sdxLayoutControlCustomizeFormVAlignParent="父组件管理"
sdxLayoutControlCustomizeFormVAlignTop="上"
sdxLayoutControlDesignerCaptionFormat="%s - 设计器"
sdxLayoutControlEditFormCancel="取消"
sdxLayoutControlEditFormOK="确定"
sdxLayoutControlExpandButtonHint="单击收缩"
sdxLayoutControlHomeButtonHint="停止浮动"
sdxLayoutControlNewAutoCreatedGroup="自动创建分组"
sdxLayoutControlNewEmptySpaceItemCaption="空白项目"
sdxLayoutControlNewGroupCaption="新建组"
sdxLayoutControlNewHiddenGroup="隐藏分组"
sdxLayoutControlNewImageItemCaption="图像"
sdxLayoutControlNewItemCaption="新项"
sdxLayoutControlNewLabeledItemCaption="标签"
sdxLayoutControlNewSeparatorItemCaption="分隔符"
sdxLayoutControlNewSplitterItemCaption="分隔栏"
sdxLayoutControlRoot="根"
sdxLayoutGroupDefaultCaption="分组布局"
sdxLayoutItemDefaultCaption="布局项目"
sdxLeft="左边(&L):"
sdxLeftMargin="左边界"
sdxLevelCaption="标题(&C)"
sdxLevelCaptionColor="层级标题颜色(&V):"
sdxLevelCaptions="层级标题(&C)"
sdxLevels="层级"
sdxLineSpacing="行间距(&L):"
sdxLoadBitmapDlgTitle="打开纹理"
sdxLoadedRecords="加载记录"
sdxLoadReportDataToFileTitle="打开报表"
sdxLocationLabelCaption="位置:"
sdxLookAndFeel="外观"
sdxLookAndFeelFlat="平面"
sdxLookAndFeelStandard="标准"
sdxLookAndFeelUltraFlat="超平面"
sdxManagerError="窗体上只能放置一个TdxDockingManager实例。"
sdxManufacturerBandCaption="厂商数据"
sdxManufacturerCountryColumnCaption="国籍"
sdxManufacturerLogoColumnCaption="标志"
sdxManufacturerNameColumnCaption="名称"
sdxMapControlEast="东"
sdxMapControlNorth="北"
sdxMapControlSouth="南"
sdxMapControlWest="西"
sdxMarch="三月"
sdxMarchShort="三月"
sdxMargins="页边距(&M)"
sdxMay="五月"
sdxMayShort="五月"
sdxMediumDashDotDotEdgePattern="中等短画线-点-点"
sdxMediumDashDotEdgePattern="中等短画线-点"
sdxMediumDashedEdgePattern="中等短画线"
sdxMediumSolidEdgePattern="中实线"
sdxMegaBytes="MB"
sdxMenuActivePage="当前页(&A):"
sdxMenuBar="菜单栏"
sdxMenuBuiltInMenus="内置菜单"
sdxMenuEdit="编辑(&E)"
sdxMenuEditCopy="复制(&C)"
sdxMenuEditCut="剪切(&T)"
sdxMenuEditDelete="删除(&D)"
sdxMenuEditFind="查找(&F)..."
sdxMenuEditFindNext="查找下一个(&X)"
sdxMenuEditPaste="粘贴(&P)"
sdxMenuEditReplace="替换(&R)..."
sdxMenuExplorer="资源管理器(&X)"
sdxMenuExplorerChangeRootPath="设置根路径..."
sdxMenuExplorerCreateFolder="创建文件夹(&F)"
sdxMenuExplorerDelete="删除(&D)..."
sdxMenuExplorerGoToUpOneLevel="上一层"
sdxMenuExplorerProperties="属性(&P)..."
sdxMenuExplorerRefresh="刷新"
sdxMenuExplorerRename="重命名(&M)"
sdxMenuExplorerSetAsRoot="设为根路径"
sdxMenuExportToPDF="输出PDF格式"
sdxMenuFile="文件(&F)"
sdxMenuFileClose="关闭(&N)"
sdxMenuFileDesign="设计(&D)..."
sdxMenuFileExit="关闭(&C)"
sdxMenuFileLoad="读取(&L)"
sdxMenuFilePageSetup="页面设置(&U)..."
sdxMenuFilePrint="打印(&P)..."
sdxMenuFilePrintDialog="打印对话框"
sdxMenuFileRebuild="重建报表(&R)"
sdxMenuFileSave="保存(&S)"
sdxMenuFileSaveAs="另存为(&A)..."
sdxMenuFormat="格式(&O)"
sdxMenuFormatAutoTextEntries="自动图文集(&A)..."
sdxMenuFormatDateTime="日期与时间(&T)..."
sdxMenuFormatFootnotes="脚注…(&N)..."
sdxMenuFormatHeaderAndFooter="页眉和页脚(&H)"
sdxMenuFormatHFBackground="页眉/页脚背景..."
sdxMenuFormatHFClear="清除文本"
sdxMenuFormatPageBackground="背景(&K)..."
sdxMenuFormatPageNumbering="页码(&N)..."
sdxMenuFormatShrinkToPage="适应页宽(&F)"
sdxMenuFormatTitle="标题(&I)..."
sdxMenuGotoPage="转到(&G)"
sdxMenuGotoPageFirst="首页(&F)"
sdxMenuGotoPageLast="尾页(&L)"
sdxMenuGotoPageNext="下一页(&N)"
sdxMenuGotoPagePrev="上一页(&P)"
sdxMenuHelp="帮助(&H)"
sdxMenuHelpAbout="关于(&A)..."
sdxMenuHelpTopics="帮助主题(&T)..."
sdxMenuInsert="插入(&I)"
sdxMenuInsertAutoText="自动图文集(&A)"
sdxMenuInsertAutoTextEntries="自动图文集列表"
sdxMenuInsertAutoTextEntriesSubItem="插入自动图文集(&S)"
sdxMenuInsertDate="日期(&D)"
sdxMenuInsertDateTime="日期与时间"
sdxMenuInsertEditAutoTextEntries="自动图文集(&X)..."
sdxMenuInsertMachineName="机器名称(&M)"
sdxMenuInsertPageNumber="页码(&P)"
sdxMenuInsertPageOfPages="页面页码(&G)"
sdxMenuInsertTime="时间(&T)"
sdxMenuInsertTotalPages="页数(&N)"
sdxMenuInsertUserName="用户名(&U)"
sdxMenuLoad="读取(&L)..."
sdxMenuNewMenu="新建菜单"
sdxMenuPages="页(&P)"
sdxMenuPreview="预览(&V)..."
sdxMenuPrintStyles="打印样式"
sdxMenuShortcutAutoText="自动图文集"
sdxMenuShortcutExplorer="资源管理器"
sdxMenuShortCutMenus="快捷菜单"
sdxMenuShortcutPreview="预览"
sdxMenuShortcutThumbnails="缩略图"
sdxMenuShowEmptyPages="显示空白页(&E)"
sdxMenuThumbnailsLarge="大缩略图(&L)"
sdxMenuThumbnailsSmall="小缩略图(&S)"
sdxMenuTools="工具(&T)"
sdxMenuToolsCustomize="自定义(&C)..."
sdxMenuToolsOptions="选项(&O)..."
sdxMenuView="视图(&V)"
sdxMenuViewExplorer="资源管理器(&X)"
sdxMenuViewFlatToolBarButtons="平面工具栏按钮(&F)"
sdxMenuViewHFClose="关闭(&C)"
sdxMenuViewHFSwitchHeaderFooter="显示页眉/页脚(&S)"
sdxMenuViewLargeToolBarButtons="大工具栏按钮(&L)"
sdxMenuViewMargins="页边距(&M)"
sdxMenuViewMarginsStatusBar="页边距栏(&A)"
sdxMenuViewPagesFooters="页脚(&R)"
sdxMenuViewPagesHeaders="页眉(&H)"
sdxMenuViewPagesStatusBar="状态栏(&S)"
sdxMenuViewSwitchToCenterPart="切换到中间"
sdxMenuViewSwitchToFooter="页脚"
sdxMenuViewSwitchToHeader="页眉"
sdxMenuViewSwitchToLeftPart="切换到左部"
sdxMenuViewSwitchToRightPart="切换到右部"
sdxMenuViewThumbnails="缩略图(&U)"
sdxMenuViewToolBars="工具栏(&T)"
sdxMenuZoom="缩放(&Z)"
sdxMenuZoomFourPages="四页(&F)"
sdxMenuZoomMultiplyPages="多页(&M)"
sdxMenuZoomPageWidth="页宽(&W)"
sdxMenuZoomPercent100="100%(&1)"
sdxMenuZoomSetup="设置(&S)..."
sdxMenuZoomTwoPages="两页(&T)"
sdxMenuZoomWholePage="整页(&H)"
sdxMenuZoomWidenToSourceWidth="扩展到原始宽度(&O)"
sdxMiscellaneous="杂项"
sdxMissingComponent="缺少"Component"属性"
sdxMode="模式(&M):"
sdxModelBandCaption="汽车数据"
sdxMonth="月份"
sdxMultipleRecords="多条记录(&M)"
sdxName="名称(&N):"
sdxName1="宙斯"
sdxName2="撒旦"
sdxNameCaption="名称"
sdxNavBarAddChildGroup="添加子项"
sdxNavBarAddGroup="添加分组"
sdxNavBarAddItem="添加项"
sdxNavBarAddSeparator="添加分隔符"
sdxNavBarClose="关闭(&C)"
sdxNavBarCollapseAll="全部折叠"
sdxNavBarCustomizationCaption="自定义"
sdxNavBarDelete="删除"
sdxNavBarExpandAll="全部展开"
sdxNavBarItemsDesignerCaptionFormat="%s - 项设计器"
sdxNavBarMoveDown="下移(&D)"
sdxNavBarMoveUp="上移(&U)"
sdxNavBarNewGroupCaption="新建组"
sdxNavBarNewGroupsCaption="分组和链接:"
sdxNavBarNewItemsCaption="项:"
sdxNavBarOffice11AddRemoveButtons="添加或删除按钮(&A)"
sdxNavBarOffice11ShowFewerButtons="显示较少的按钮(&F)"
sdxNavBarOffice11ShowMoreButtons="显示较多的按钮(&M)"
sdxNavigationPaneCollapseBar="导航面板"
sdxNavigationPaneCollapseBarHint="点击展开导航面板"
sdxNavigationPaneExpandNavPaneSignHint="展开导航面板"
sdxNavigationPaneMinimizeNavPaneSignHint="最小化导航面板"
sdxNavigationPaneOverflowPanelCustomizeHint="配置按钮"
sdxNewCompositionCaption="新建组件"
sdxNewExplorerFolderItem="新建文件夹"
sdxNewReport="新报表"
sdxNewStyleRepositoryWasCreated="新的样式库"%s"已创建并分配"
sdxNodeAutoHeight="节点自动调整高度(&N)"
sdxNodeExpanding="展开节点"
sdxNoDefaultPrintDevice="没有选择默认打印机"
sdxNodes="节点(&N)"
sdxNodesGrid="节点网格线"
sdxNone="(无)"
sdxNoPages="[没有可显示的页面"
sdxNorth="北方"
sdxNotes="注意"
sdxNotPrinting="当前打印机不打印"
sdxNovember="十一月"
sdxNovemberShort="十一月"
sdxOctober="十月"
sdxOctoberShort="十月"
sdxOddColor="奇数行颜色(&L):"
sdxOddFont="奇数行字体"
sdxOf="共"
sdxOfficeNavigationBarCancel="取消"
sdxOfficeNavigationBarCompactNavigation="简洁导航(&C)"
sdxOfficeNavigationBarCustomizationDlgCaption="导航选项"
sdxOfficeNavigationBarDisplayInThisOrder="显示顺序"
sdxOfficeNavigationBarMaxVisibleItems="要显示的项目的最大数量:"
sdxOfficeNavigationBarNavigationOptionsMenuItem="导航选项(&V)..."
sdxOfficeNavigationBarOk="确定"
sdxOfficeNavigationBarReset="重置(&R)"
sdxOldFormat="皮肤数据版本比ExpressSkins库版本旧。皮肤不能读取到一个不匹配的版本。"
sdxOneGroupPerPage="每页一组"
sdxOneResourcePerPage="每页一个资源(&R)"
sdxOnEveryPage="在每页"
sdxOneWrappingPerPage="每页一个换行(&O)"
sdxOnlyActiveDetails="仅含当前细节"
sdxOnlyComponentsInActiveForm="只显示当前表单的组件(&F)"
sdxOnlyComponentsWithoutLinks="只显示除现有报表链接以外的组件(&W)"
sdxOnlySelected="只是选定的(&S)"
sdxOptions="选项"
sdxOrderNoCaption="序号"
sdxOrgChartEditorCancelButton="取消"
sdxOrgChartEditorCaption="TdxOrgChart 项编辑器"
sdxOrgChartEditorChildAlign="子对齐(&A)"
sdxOrgChartEditorColor="颜色(&C)"
sdxOrgChartEditorHeight="高度(&H)"
sdxOrgChartEditorHintAntialiasing="消除锯齿开/关"
sdxOrgChartEditorHintApplyForAllChildren="选定项的所有子项的设置属性"
sdxOrgChartEditorHintDeleteItem="删除项目"
sdxOrgChartEditorHintInsertItem="插入新项目"
sdxOrgChartEditorHintInsertSubItem="插入新子项"
sdxOrgChartEditorHintRotate="90"#$B0" 旋转开/关"
sdxOrgChartEditorHintZoom="打开/关闭缩放"
sdxOrgChartEditorImageAlign="图像对齐"
sdxOrgChartEditorImageIndex="图像索引"
sdxOrgChartEditorItems="项"
sdxOrgChartEditorProperties="项属性"
sdxOrgChartEditorShape="形状(&S)"
sdxOrgChartEditorText="文本"
sdxOrgChartEditorWidth="宽度(&W)"
sdxOrientation=" 方向 "
sdxOutOfResources="资源不足"
sdxOutsideMargins="一个或多个页边距超出页面的可打印区域"
sdxOutsideMarginsMessage="一个或多个页边距超出页面的可打印区域。 \n是否继续 ？"
sdxOutsideMarginsMessage2="一个或多一个或多个页边距超出页面的可打印区域。 \n选择调整按钮，以适当增加页边距。"
sdxOverThenDown="先行后列(&V)"
sdxOverwriteFolderMessageText="文件夹"%s"已包含名为"%s"的文件夹。 \n \n如果现有的文件夹中有同名项移动或复制将会替换原文件。是否移动或复制该文件夹？"
sdxOverwriteItemMessageText="文件夹"%s"已包含项目"%s"。是否覆盖现有的项目？"
sdxPage="页(&P)"
sdxPageBackground=" 页面背景"
sdxPageNumbering="页码"
sdxPages="页"
sdxPageSetupCaption="页面设置"
sdxPagesWideBy="页宽(&W)"
sdxPageWidth="页宽"
sdxPaginateByControlDetails="控件详细信息"
sdxPaginateByControls="控件"
sdxPaginateByGroups="分组"
sdxPaginateByItems="项"
sdxPagination="分页"
sdxPaintItemsGraphics="绘制项目图示(&P)"
sdxPaintMode="画图模式(&M)"
sdxPaintModeCenter="居中"
sdxPaintModeProportional="锁定比例"
sdxPaintModeStretch="拉伸"
sdxPaintModeTile="平铺"
sdxPaper=" 纸张大小 "
sdxPaperDimension="尺寸"
sdxPaperHeight="高度(&E):"
sdxPaperSize="纸张大小:"
sdxPaperSource="纸张来源(&U):"
sdxPaperType="类型(&Y)"
sdxPaperWidth="宽度(&W):"
sdxParagraphAlignmentCenter="中间"
sdxParagraphAlignmentJustify="两端对齐"
sdxParagraphAlignmentLeft="左"
sdxParagraphAlignmentRight="右"
sdxParagraphFirstLineIndentHanging="悬挂"
sdxParagraphFirstLineIndentIndented="首行"
sdxParagraphFirstLineIndentNone="(无)"
sdxParagraphLineSpacingAtLeast="至少"
sdxParagraphLineSpacingDouble="双"
sdxParagraphLineSpacingExactly="精确"
sdxParagraphLineSpacingMultiple="多重"
sdxParagraphLineSpacingSesquialteral="1.5行"
sdxParagraphLineSpacingSingle="单一"
sdxParagraphOutlineLeve0="正文文本"
sdxParagraphOutlineLeve1="1级"
sdxParagraphOutlineLeve2="2级"
sdxParagraphOutlineLeve3="3级"
sdxParagraphOutlineLeve4="4级"
sdxParagraphOutlineLeve5="5级"
sdxParagraphOutlineLeve6="6级"
sdxParagraphOutlineLeve7="7级"
sdxParagraphOutlineLeve8="8级"
sdxParagraphOutlineLeve9="9级"
sdxPark="公园"
sdxPasswordDialogButtonCancel="取消"
sdxPasswordDialogButtonOK="确定"
sdxPasswordDialogCaption="密码保护"
sdxPasswordDialogCaptionConfirm="确认密码"
sdxPasswordDialogPassword="输入密码:"
sdxPasswordDialogPasswordConfirmation="重新输入密码:"
sdxPasswordDialogPasswordNotes="警告：如果您丢失或忘记密码，则无法恢复。建议你把它放在安全的地方."
sdxPasswordDialogPasswordNotMatch="密码确认不匹配."
sdxPasteSpecialDialogButtonCancel="取消"
sdxPasteSpecialDialogButtonOK="确定"
sdxPasteSpecialDialogCaption="选择性粘贴"
sdxPasteSpecialDialogPasteOptions="粘贴"
sdxPattern="图案(&P)"
sdxPatternDarkDownwardDiagonal="下对角线深色"
sdxPatternDarkHorizontal="深色横线"
sdxPatternDarkUpwardDiagonal="上对角线深色"
sdxPatternDarkVertical="深色竖线"
sdxPatternDashedDownward="下对角虚线"
sdxPatternDashedHorizontal="竖虚线"
sdxPatternDashedUpward="上对角虚线"
sdxPatternDashedVertical="横虚线"
sdxPatternDiagonalBrick="对角砖形"
sdxPatternDivot="草皮"
sdxPatternDottedDiamond="点式菱形"
sdxPatternDottedGrid="虚线网格"
sdxPatternGray10="10%"
sdxPatternGray20="20%"
sdxPatternGray25="25%"
sdxPatternGray30="30%"
sdxPatternGray40="40%"
sdxPatternGray5="5%"
sdxPatternGray50="50%"
sdxPatternGray60="60%"
sdxPatternGray70="70%"
sdxPatternGray75="75%"
sdxPatternGray80="80%"
sdxPatternGray90="90%"
sdxPatternHorizantalBrick="横向砖形"
sdxPatternIsNotRegistered="图案"%s"没注册"
sdxPatternLargeCheckedBoard="大棋盘"
sdxPatternLargeConfetti="大纸屑"
sdxPatternLargeGrid="大网格"
sdxPatternLightDownwardDiagonal="下对角线浅色"
sdxPatternLightHorizontal="浅色横线"
sdxPatternLightUpwardDiagonal="上对角线浅色"
sdxPatternLightVertical="浅色垂线"
sdxPatternNarrowHorizontal="窄横线"
sdxPatternNarrowVertical="窄竖线"
sdxPatternOutlinedDiamond="菱形轮廓"
sdxPatternPlaid="格子图案"
sdxPatternShingle="瓦形"
sdxPatternSmallCheckedBoard="小棋盘"
sdxPatternSmallConfetti="小纸屑"
sdxPatternSmallGrid="小网格"
sdxPatternSolidDiamond="实心菱形"
sdxPatternSphere="球体"
sdxPatternTrellis="棚架"
sdxPatternWave="波浪线"
sdxPatternWeave="编织物"
sdxPatternWideDownwardDiagonal="宽下对角线"
sdxPatternWideUpwardDiagonal="宽上对角线"
sdxPatternZigZag="之字形"
sdxPaymentAmount="付款金额"
sdxPaymentType="付款方式"
sdxPDFDialogAuthor="作者"
sdxPDFDialogCaption="PDF 导出选项"
sdxPDFDialogCompressed="压缩"
sdxPDFDialogCreator="作者"
sdxPDFDialogDocumentInfoTabSheet="文档信息(&D)"
sdxPDFDialogEmbedFonts="嵌入字体"
sdxPDFDialogExportSettings="输出设置"
sdxPDFDialogExportTabSheet="导出(&E)"
sdxPDFDialogKeywords="关键字"
sdxPDFDialogMaxCompression="最大压缩"
sdxPDFDialogMaxQuality="最大质量"
sdxPDFDialogOpenAfterExport="打开后导出"
sdxPDFDialogPageRageTabSheet="页(&P)"
sdxPDFDialogSecurityAllowChanging="允许更改文档"
sdxPDFDialogSecurityAllowComments="允许评论"
sdxPDFDialogSecurityAllowCopy="允许内容复制和提取"
sdxPDFDialogSecurityAllowDocumentAssemble="允许文档集"
sdxPDFDialogSecurityAllowPrint="允许打印"
sdxPDFDialogSecurityAllowPrintHiResolution="允许使用高分辨率打印"
sdxPDFDialogSecurityEnabled="启用"
sdxPDFDialogSecurityMethod="方法:"
sdxPDFDialogSecurityOwnerPassword="所有者密码:"
sdxPDFDialogSecuritySettings="安全设置"
sdxPDFDialogSecurityUserPassword="用户密码:"
sdxPDFDialogSubject="主题"
sdxPDFDialogTabDocInfo="文档信息(&D)"
sdxPDFDialogTabExport="导出(&E)"
sdxPDFDialogTabPages="页(&P)"
sdxPDFDialogTabSecurity="安全性(&S)"
sdxPDFDialogTitle="标题"
sdxPDFDialogUseCIDFonts="使用 CID 字体"
sdxPDFDialogUseJPEGCompression="使用 JPEG 压缩的图像"
sdxPenColor="铅笔颜色"
sdxPercentOfNormalSize="% 正常大小"
sdxPicture="图片(&I)"
sdxPivotGridColumnHeader="列头"
sdxPivotGridContent="内容"
sdxPivotGridFieldHeader="字段标题"
sdxPivotGridHeaderBackground="标题背景"
sdxPivotGridPrefilter="预过滤器"
sdxPivotGridRowHeader="行标题"
sdxPlan="设计图"
sdxPNFormatsCaption="页码格式"
sdxPNFormatsChangeDefaultFormat="是否改变默认页码格式来匹配"%s" ？"
sdxPNFormatsContinueFromPrevious="续前节(&C)"
sdxPNFormatsNumberFormat="数字格式(&F):"
sdxPNFormatsStartAt="起始页码(&A):"
sdxPopupMenuFlatButtons="平面按钮(&F)"
sdxPopupMenuLargeButtons="大按钮(&L)"
sdxPortrait="纵向(&O)"
sdxPosition="位置(&P)"
sdxPositioning="位置"
sdxPredefinedFunctions=" 预定义函数 "  // dxPgsDlg.pas"
sdxPreferenceDlgCaption="选项"
sdxPreferenceDlgFlatBtns="平面工具栏按钮(&F)"
sdxPreferenceDlgLargeBtns="大工具栏按钮(&L)"
sdxPreferenceDlgMargingWhileDragging="当拖曳时显示页边距提示(&D)"
sdxPreferenceDlgMargins="页边距(&M) "
sdxPreferenceDlgMarginsColor="页边距颜色(&C):"
sdxPreferenceDlgMarginsHints="页边距提示(&H)"
sdxPreferenceDlgMeasurementUnits="度量单位(&U):"
sdxPreferenceDlgSaveForRunTimeToo="保存设置(&R)"
sdxPreferenceDlgShow=" 显示(&S) "
sdxPreferenceDlgTab1="常规(&G)"
sdxPreferenceDlgTab10=""
sdxPreferenceDlgTab2=""
sdxPreferenceDlgTab3=""
sdxPreferenceDlgTab4=""
sdxPreferenceDlgTab5=""
sdxPreferenceDlgTab6=""
sdxPreferenceDlgTab7=""
sdxPreferenceDlgTab8=""
sdxPreferenceDlgTab9=""
sdxPreferenceDlgZoomScroll="用智能鼠标缩放(&Z)"
sdxPreferenceDlgZoomStep="缩放比例(&P):"
sdxPrefilter="预过滤器(&P)"
sdxPressEscToCancel="“Esc”键取消"
sdxPreview="预览(&W)"
sdxPreviewAutoHeight="自动高度(&U)"
sdxPreviewColor="预览颜色(&P):"
sdxPreviewFont="预览字体"
sdxPreviewLineCount="预览行数(&T):"
sdxPreviewMaxLineCount="最大行数(&M): "
sdxPreviewNotRegistered="没有已注册的预览表单"
sdxPreviewStyle="预览"
sdxPreviewTab="预览"
sdxPriceCaption="价格"
sdxPrimaryTimeZone="主要"
sdxPrintDeviceError="打印机出错 ！"
sdxPrintDeviceIsBusy="打印机正忙"
sdxPrintDeviceNotReady="打印机尚未安装或者没有就绪"
sdxPrintDialogAll="所有(&A)"
sdxPrintDialogAllPages="所有"
sdxPrintDialogCaption="打印"
sdxPrintDialogCollateCopies="逐份打印(&T)"
sdxPrintDialogComment="注释:"
sdxPrintDialogCopies=" 副本 "
sdxPrintDialogCurrentPage="当前页(&E)"
sdxPrintDialogEvenPages="偶数页"
sdxPrintDialogInPrintingState="打印机正在打印。请稍候。"
sdxPrintDialogInvalidPageRanges="无效的页码范围"
sdxPrintDialogName="名称(&N):"
sdxPrintDialogNumberOfCopies="份数(&C):"
sdxPrintDialogNumberOfPages="页数(&U):"
sdxPrintDialogOddPages="奇数页"
sdxPrintDialogOpenDlgAllFiles="所有文件"
sdxPrintDialogOpenDlgPrinterFiles="打印机文件"
sdxPrintDialogOpenDlgTitle="选择文件名称"
sdxPrintDialogPageNumbersOutOfRange="页码超出范围 (%d - %d)"
sdxPrintDialogPageRange=" 页面范围 "
sdxPrintDialogPages="页(&P):"
sdxPrintDialogPrinter=" 打印机 "
sdxPrintDialogPrintStyles=" 打印样式(&Y) "
sdxPrintDialogPrintToFile="打印到文件(&F)"
sdxPrintDialogPSBusy="忙"
sdxPrintDialogPSDoorOpen="通道打开"
sdxPrintDialogPSError="错误"
sdxPrintDialogPSInitializing="正在初始化"
sdxPrintDialogPSIOActive="输入输出有效"
sdxPrintDialogPSManualFeed="手工送纸"
sdxPrintDialogPSNotAvailable="不可用"
sdxPrintDialogPSNoToner="没有墨粉"
sdxPrintDialogPSOFFLine="脱机"
sdxPrintDialogPSOutBinFull="输出储存器已满"
sdxPrintDialogPSOutOfMemory="内存溢出"
sdxPrintDialogPSPagePunt="页平底"
sdxPrintDialogPSPaperJam="卡纸"
sdxPrintDialogPSPaperOut="纸张跳出"
sdxPrintDialogPSPaperProblem="纸张问题"
sdxPrintDialogPSPaused="暂停"
sdxPrintDialogPSPendingDeletion="正在删除"
sdxPrintDialogPSPrinting="正在打印"
sdxPrintDialogPSPrintingAndWaiting="正在打印：%d份文档，请等待"
sdxPrintDialogPSProcessing="正在处理"
sdxPrintDialogPSReady="就绪"
sdxPrintDialogPSTonerLow="墨粉较少"
sdxPrintDialogPSUserIntervention="用户干涉"
sdxPrintDialogPSWaiting="正在等待"
sdxPrintDialogPSWarningUp="正在预热"
sdxPrintDialogRangeLegend="输入页码和/或页范围 \n用逗号隔开。例如：1,3,5-12。"
sdxPrintDialogRequiredPageNumbers="输入页码"
sdxPrintDialogSelection="选择(&S)"
sdxPrintDialogStatus="状态:"
sdxPrintDialogType="类型:"
sdxPrintDialogWhere="位置:"
sdxPrintedBy="打印由 "
sdxPrintedOn="打印在 "
sdxPrinterIndexError="打印机索引超出范围"
sdxPrinting="打印进度"
sdxPrintingReport="正在打印报表：已完成%d页。 按ESC键中断"
sdxPrintingReportStatusText="打印报表 - 按ESC键取消"
sdxPrintOrder=" 打印次序 "
sdxPrintPreview="打印预览"
sdxPrintRangeEnd="结束(&E):"
sdxPrintRanges="打印范围"
sdxPrintRangeStart="开始(&S):"
sdxPrintStyleCaptionDaily="每日样式"
sdxPrintStyleCaptionDetails="详细日历样式"
sdxPrintStyleCaptionMemo="备注样式"
sdxPrintStyleCaptionMonthly="每月样式"
sdxPrintStyleCaptionTimeLine="时间线样式"
sdxPrintStyleCaptionTrifold="三栏样式"
sdxPrintStyleCaptionWeekly="每周样式"
sdxPrintStyleCaptionYearly="每年样式"
sdxPrintStyleDailyLayout1PPD="1 页/天"
sdxPrintStyleDailyLayout2PPD="2 页/天"
sdxPrintStyleDetailsStartNewPageEach="开始一个新页每个:"
sdxPrintStyleDontPrintWeekEnds="不打印周末(&D)"
sdxPrintStyleInclude="包含:"
sdxPrintStyleIncludeNotesAreaBlank="备注区域（空白）(&B)"
sdxPrintStyleIncludeNotesAreaLined="备注区域（分行）(&L)"
sdxPrintStyleIncludeTaskPad="任务板(&P)"
sdxPrintStyleLayout="布局(&L):"
sdxPrintStyleMemoPrintOnlySelectedEvents="仅打印选定的事件"
sdxPrintStyleMemoStartEachItemOnNewPage="启动新一页上的每个项目"
sdxPrintStyleMonthlyLayout1PPM="1 页/月"
sdxPrintStyleMonthlyLayout2PPM="2 页/月"
sdxPrintStyleMonthlyPrintExactly1MPP="打印每页一个月的(&E)"
sdxPrintStyleMonthPerPage="月/页(&M):"
sdxPrintStyleNameDaily="日"
sdxPrintStyleNameDetails="详细信息"
sdxPrintStyleNameMemo="备注"
sdxPrintStyleNameMonthly="月"
sdxPrintStyleNameTrifold="三栏"
sdxPrintStyleNameWeekly="周"
sdxPrintStylePrimaryPageHeadersOnly="仅主页标题"
sdxPrintStylePrimaryPageScalesOnly="仅主页标尺"
sdxPrintStylePrintFrom="打印从(&F):"
sdxPrintStylePrintTo="打印到(&T):"
sdxPrintStyleShowEventImages="显示活动图片"
sdxPrintStyleShowResourceImages="显示资源图像"
sdxPrintStyleTrifoldSectionLeft="左侧的部分(&L):"
sdxPrintStyleTrifoldSectionMiddle="中间的部分(&M):"
sdxPrintStyleTrifoldSectionModeDailyCalendar="日历"
sdxPrintStyleTrifoldSectionModeMonthlyCalendar="月历"
sdxPrintStyleTrifoldSectionModeNotesBlank="备注 (空白)"
sdxPrintStyleTrifoldSectionModeNotesLined="备注 (分行)"
sdxPrintStyleTrifoldSectionModeTaskPad="任务板"
sdxPrintStyleTrifoldSectionModeWeeklyCalendar="周历"
sdxPrintStyleTrifoldSectionRight="右侧部分(&R):"
sdxPrintStyleWeeklyArrange="排列(&A):"
sdxPrintStyleWeeklyArrangeL2R="从左到右"
sdxPrintStyleWeeklyArrangeT2B="从上到下"
sdxPrintStyleWeeklyDaysLayout="天布局(&D):"
sdxPrintStyleWeeklyDaysLayoutOC="一列"
sdxPrintStyleWeeklyDaysLayoutTC="两列"
sdxPrintStyleWeeklyLayout1PPW="1 页/周"
sdxPrintStyleWeeklyLayout2PPW="2 页/周"
sdxPrintStyleWorkTimeOnly="仅在工作时间(&W)"
sdxPrintStyleYearly12MPP="12 个月/页"
sdxPrintStyleYearly1MPP="1 个月/页"
sdxPrintStyleYearly2MPP="2 个月/页"
sdxPrintStyleYearly3MPP="3 个月/页"
sdxPrintStyleYearly4MPP="4 个月/页"
sdxPrintStyleYearly6MPP="6 个月/页"
sdxPrintUsingGrayShading="使用灰色阴影打印(&G)"
sdxProcessExactSelection="处理精确选择(&X)"
sdxProcessSelection="处理选择(&S)"
sdxProperties="属性(&P)"
sdxProtectSheetDialogAllowDeleteColumns="删除列"
sdxProtectSheetDialogAllowDeleteRows="删除行"
sdxProtectSheetDialogAllowEditContainers="编辑容器"
sdxProtectSheetDialogAllowEditHyperlinks="编辑超链接"
sdxProtectSheetDialogAllowFormatCells="单元格格式"
sdxProtectSheetDialogAllowInsertColumns="插入列"
sdxProtectSheetDialogAllowInsertRows="插入行"
sdxProtectSheetDialogAllowResizeColumns="调整列宽"
sdxProtectSheetDialogAllowResizeRows="调整行"
sdxProtectSheetDialogAllowSelectLockedCells="选择锁定的单元格"
sdxProtectSheetDialogAllowSelectUnlockedCells="选择未锁定的单元格"
sdxProtectSheetDialogAllowSort="排序"
sdxProtectSheetDialogButtonCancel="取消"
sdxProtectSheetDialogButtonOK="确定"
sdxProtectSheetDialogCaption="保护页"
sdxProtectSheetDialogPassword="要撤消工作表保护密码:"
sdxProtectSheetDialogPermissions="允许此工作表的所有用户:"
sdxProtectSheetDialogProtect="保护锁定单元格的工作表和内容"
sdxProtectWorkbookDialogButtonCancel="取消"
sdxProtectWorkbookDialogButtonOK="确定"
sdxPSReportFiles="报表文件"
sdxPt="磅。"
sdxPurchaseMonth="购买月份"
sdxPurchaseQuarter="购买季度"
sdxPureColorAqua="浅绿色"
sdxPureColorBlack="黑色"
sdxPureColorBlue="蓝色"
sdxPureColorCream="乳白色"
sdxPureColorFuchsia="紫红色"
sdxPureColorGray="灰色"
sdxPureColorGreen="绿色"
sdxPureColorLime="浅绿色"
sdxPureColorMaroon="褐色"
sdxPureColorMedGray="中灰色"
sdxPureColorMoneyGreen="钱绿色"
sdxPureColorNavy="深蓝"
sdxPureColorOlive="黄绿"
sdxPureColorPurple="紫色"
sdxPureColorRed="红色"
sdxPureColorSilver="银色"
sdxPureColorSkyBlue="天蓝色"
sdxPureColorTeal="青色"
sdxPureColorWhite="白色"
sdxPureColorYellow="黄色"
sdxQuantity="数量"
sdxRectangle="矩形"
sdxRecurrenceLabelCaption="重复:"
sdxRecurrenceNoneMessage="(无)"
sdxRecurrencePatternLabelCaption="循环模式:"
sdxRefinements="修正"
sdxRegular="常规"
sdxRename="重命名(&M)"
sdxRenameDialogCaption="重命名页"
sdxRenameDialogSheetName="页名称:"
sdxRepeatHeaderRowAtTop="在顶端重复标题行"
sdxReportCellClassNotRegistered="%s类没注册。 请确保相应的报表链接单元已经添加到了应用程序"
sdxReportDesignerCaption="报表设计"
sdxReportDocumentIsCorrupted="(文件不是报表文件或已损坏)"
sdxReportExplorer="报表浏览器"
sdxReportFootnotesDlgCaption="报表页脚"
sdxReportGroupNullLookAndFeel="空"
sdxReportGroupOfficeLookAndFeel="办公室"
sdxReportGroupStandardLookAndFeel="标准"
sdxReportGroupWebLookAndFeel="网页"
sdxReportLinksTab="总设计师"
sdxReportTitleDlgCaption="报表标题"
sdxRequiredFileName="输入文件名。"
sdxResourceCountPerPage="资源/页(&R):"
sdxReverseDiagonalStripeFillPattern="逆对角线条纹"
sdxReverseOnEvenPages="偶页相反(&R)"
sdxRibbonColorGalleryAutoColor="自动"
sdxRibbonColorGalleryGroupCustomColors="自定义颜色"
sdxRibbonColorGalleryGroupStandardColors="常用颜色"
sdxRibbonColorGalleryGroupThemeColors="主题颜色"
sdxRibbonColorGalleryMoreColors="更多颜色(&M)..."
sdxRibbonCustomizationFormAddErrorMsg="命令需要添加到自定义组. 要创建一个分组，在列表中选择一个选项卡，单击新建分组."
sdxRibbonCustomizationFormAllCommands="所有命令"
sdxRibbonCustomizationFormAllTabs="所有选项卡"
sdxRibbonCustomizationFormBeginGroup="<分隔符>"
sdxRibbonCustomizationFormCaptionAdd="添加(&A)"
sdxRibbonCustomizationFormCaptionAddNewContext="添加新的上下文(&C)"
sdxRibbonCustomizationFormCaptionAddNewGroup="添加新分组(&G)"
sdxRibbonCustomizationFormCaptionAddNewTab="添加新选项卡(&T)"
sdxRibbonCustomizationFormCaptionCancel="取消(&C)"
sdxRibbonCustomizationFormCaptionCommandsSource="选择命令从(&H):"
sdxRibbonCustomizationFormCaptionMoveDown="下移(&D)"
sdxRibbonCustomizationFormCaptionMoveUp="上移(&U)"
sdxRibbonCustomizationFormCaptionNewElement="添加(&A)"
sdxRibbonCustomizationFormCaptionOK="确定(&O)"
sdxRibbonCustomizationFormCaptionQuickAccessToolbar="自定义快速访问工具栏(&Q):"
sdxRibbonCustomizationFormCaptionQuickAccessToolbarShowBelowRibbon="显示在功能区下方快速访问工具栏"
sdxRibbonCustomizationFormCaptionQuickAccessToolbarTitle="自定义快速访问工具栏"
sdxRibbonCustomizationFormCaptionRemove="删除(&R)"
sdxRibbonCustomizationFormCaptionRename="重命名(&M)..."
sdxRibbonCustomizationFormCaptionReset="重置(&E)"
sdxRibbonCustomizationFormCaptionResetAllCustomizations="重置所有自定义(&L)"
sdxRibbonCustomizationFormCaptionResetOnlySelectedTab="仅重置选择的选项卡(&S)"
sdxRibbonCustomizationFormCaptionResetSelectedTab="重置选项卡(&B)"
sdxRibbonCustomizationFormCaptionRibbonSource="自定义功能区(&B):"
sdxRibbonCustomizationFormCaptionRibbonTitle="自定义功能区"
sdxRibbonCustomizationFormCaptionShowTab="显示选项卡(&S)"
sdxRibbonCustomizationFormCommandsNotInTheRibbon="不在功能区中的命令"
sdxRibbonCustomizationFormCustomElementSuffix=" (自定义)"
sdxRibbonCustomizationFormCustomGroups="自定义分组"
sdxRibbonCustomizationFormCustomTabsAndGroups="自定义选项卡和分组"
sdxRibbonCustomizationFormDelimiterContextTab=" | "
sdxRibbonCustomizationFormDisplayName="显示名称"
sdxRibbonCustomizationFormMainTabs="主选项卡"
sdxRibbonCustomizationFormNewContext="新建上下文"
sdxRibbonCustomizationFormNewGroup="新建分组"
sdxRibbonCustomizationFormNewTab="新建选项卡"
sdxRibbonCustomizationFormRename="重命名"
sdxRibbonCustomizationFormTabSuffix=" 选项卡"
sdxRibbonCustomizationFormToolTabs="工具选项卡"
sdxRibbonPrintPreviewClosePrintPreview="关闭打印预览"
sdxRibbonPrintPreviewGroupFormat="格式"
sdxRibbonPrintPreviewGroupInsertName="名称"
sdxRibbonPrintPreviewGroupInsertPageNumber="页码"
sdxRibbonPrintPreviewGroupNavigation="导航"
sdxRibbonPrintPreviewGroupOutput="输出"
sdxRibbonPrintPreviewGroupParts="部分"
sdxRibbonPrintPreviewGroupReport="报表"
sdxRibbonPrintPreviewGroupZoom="缩放"
sdxRibbonPrintPreviewPagesSubItem="页"
sdxRichEditBookmarkDialogBookmarkName="书签名称(&B):"
sdxRichEditBookmarkDialogButtonAdd="添加(&A)"
sdxRichEditBookmarkDialogButtonCancel="关闭"
sdxRichEditBookmarkDialogButtonDelete="删除(&D)"
sdxRichEditBookmarkDialogButtonGoTo="转到(&G)"
sdxRichEditBookmarkDialogForm="书签"
sdxRichEditBookmarkDialogSortBy="排序:"
sdxRichEditBookmarkDialogSortByLocation="位置(&L)"
sdxRichEditBookmarkDialogSortByName="名称(&N)"
sdxRichEditBorderLineStyleNone="无"
sdxRichEditBorderShadingDialogAll="全部(&A)"
sdxRichEditBorderShadingDialogApplyTo="应用到(&L):"
sdxRichEditBorderShadingDialogApplyToCell="单元格"
sdxRichEditBorderShadingDialogApplyToTable="表格"
sdxRichEditBorderShadingDialogBorderLineColor="颜色(&C):"
sdxRichEditBorderShadingDialogBorderLineStyle="样式(&Y):"
sdxRichEditBorderShadingDialogBorderLineWeight="宽度(&W):"
sdxRichEditBorderShadingDialogBorders="边框(&B)"
sdxRichEditBorderShadingDialogBox="框(&X)"
sdxRichEditBorderShadingDialogButtonOptions="选项(&O)..."
sdxRichEditBorderShadingDialogCustom="自定义(&U)"
sdxRichEditBorderShadingDialogForm="边框和阴影"
sdxRichEditBorderShadingDialogGrid="表格(&D)"
sdxRichEditBorderShadingDialogNone="无(&N)"
sdxRichEditBorderShadingDialogPreview="预览"
sdxRichEditBorderShadingDialogPreviewTxt="单击下方图示或使用按钮可应用边框"
sdxRichEditBorderShadingDialogShading="阴影(&S)"
sdxRichEditBorderShadingDialogShadingFill="填充"
sdxRichEditBulletedListDialogAlignedAt="对齐(&A):"
sdxRichEditBulletedListDialogBulletCharacter="项目符号字符(&U)"
sdxRichEditBulletedListDialogBulletPosition="项目符号位置"
sdxRichEditBulletedListDialogButtonCharacter="字符(&C)..."
sdxRichEditBulletedListDialogForm="自定义项目符号列表"
sdxRichEditBulletedListDialogIndentAt="缩进(&I):"
sdxRichEditBulletedListDialogTextPosition="文本位置"
sdxRichEditCaption_EvenPageFooter="偶数页页脚"
sdxRichEditCaption_EvenPageHeader="偶数页页眉"
sdxRichEditCaption_FirstPageFooter="第一页页脚"
sdxRichEditCaption_FirstPageHeader="第一页页眉"
sdxRichEditCaption_OddPageFooter="奇数页页脚"
sdxRichEditCaption_OddPageHeader="奇数页页眉"
sdxRichEditCaption_PageFooter="页脚(&F)"
sdxRichEditCaption_PageHeader="头"
sdxRichEditCaption_SameAsPrevious="与上一节相同"
sdxRichEditCaptionUnitCentimeters="厘米"
sdxRichEditCaptionUnitInches="英寸"
sdxRichEditCaptionUnitMillimeters="毫米"
sdxRichEditCaptionUnitPercent="百分比"
sdxRichEditCaptionUnitPoints="点"
sdxRichEditColumnsSetupDialogApplyTo="应用到(&A):"
sdxRichEditColumnsSetupDialogColumnCount="列数(&N):"
sdxRichEditColumnsSetupDialogColumnNumber="列 #(&C):"
sdxRichEditColumnsSetupDialogColumnsPresetLeft="左"
sdxRichEditColumnsSetupDialogColumnsPresetOne="一(&O)"
sdxRichEditColumnsSetupDialogColumnsPresetRight="右(&R)"
sdxRichEditColumnsSetupDialogColumnsPresetThree="三(&T)"
sdxRichEditColumnsSetupDialogColumnsPresetTwo="二(&W)"
sdxRichEditColumnsSetupDialogEqualColumnWidth="列等宽(&E)"
sdxRichEditColumnsSetupDialogForm="列"
sdxRichEditColumnsSetupDialogLineBetween="行间(&B)"
sdxRichEditColumnsSetupDialogPresets="预设"
sdxRichEditColumnsSetupDialogSpacing="间距(&S)"
sdxRichEditColumnsSetupDialogStartNewColumn="开始新列(&U)"
sdxRichEditColumnsSetupDialogWidth="宽度(&I)"
sdxRichEditColumnsSetupDialogWidthSpacing="宽度和间距"
sdxRichEditCommandAddParagraphsToTableOfContentsDescription="将当前段落添加为内容表中的条目。"
sdxRichEditCommandAddParagraphsToTableOfContentsMenuCaption="添加文本"
sdxRichEditCommandAddSpacingAfterParagraphDescription=" "
sdxRichEditCommandAddSpacingAfterParagraphMenuCaption="段后添加空格(&A)"
sdxRichEditCommandAddSpacingBeforeParagraphDescription=" "
sdxRichEditCommandAddSpacingBeforeParagraphMenuCaption="段前添加空格(&B)"
sdxRichEditCommandAddWordToDictionaryDescription="添加到目录"
sdxRichEditCommandAddWordToDictionaryMenuCaption="添加到目录"
sdxRichEditCommandBackSpaceKeyDescription="BackSpaceKey"
sdxRichEditCommandBackSpaceKeyMenuCaption="BackSpaceKey"
sdxRichEditCommandBookmarkDescription="书签..."
sdxRichEditCommandBookmarkMenuCaption="书签..."
sdxRichEditCommandBrowserPrintDescription="打印文档与浏览器打印功能."
sdxRichEditCommandBrowserPrintMenuCaption="浏览器打印"
sdxRichEditCommandBrowserPrintPreviewDescription="打印前在浏览器中预览."
sdxRichEditCommandBrowserPrintPreviewMenuCaption="浏览器预览"
sdxRichEditCommandCapitalizeEachWordTextCaseDescription="每个单词首字母大写."
sdxRichEditCommandCapitalizeEachWordTextCaseMenuCaption="每个单词首字母大写"
sdxRichEditCommandChangeColumnCountDescription="列"
sdxRichEditCommandChangeColumnCountMenuCaption="列"
sdxRichEditCommandChangeColumnSizeDescription="ChangeColumnSizeDescription"
sdxRichEditCommandChangeColumnSizeMenuCaption="ChangeColumnSize"
sdxRichEditCommandChangeCurrentBorderRepositoryItemColorDescription="改变笔的颜色."
sdxRichEditCommandChangeCurrentBorderRepositoryItemColorMenuCaption="笔颜色"
sdxRichEditCommandChangeCurrentBorderRepositoryItemLineStyleDescription="修改边框样式."
sdxRichEditCommandChangeCurrentBorderRepositoryItemLineStyleMenuCaption="线条样式"
sdxRichEditCommandChangeCurrentBorderRepositoryItemLineThicknessDescription="边框宽度."
sdxRichEditCommandChangeCurrentBorderRepositoryItemLineThicknessMenuCaption="线条宽度"
sdxRichEditCommandChangeFloatingObjectAlignmentDescription="在页面上定位所选的对象。文字自动设置为环绕对象."
sdxRichEditCommandChangeFloatingObjectAlignmentMenuCaption="位置"
sdxRichEditCommandChangeFloatingObjectFillColorDescription="用纯色填充所选的形状."
sdxRichEditCommandChangeFloatingObjectFillColorMenuCaption="形状填充"
sdxRichEditCommandChangeFloatingObjectOutlineColorDescription="指定所选形状的轮廓颜色."
sdxRichEditCommandChangeFloatingObjectOutlineColorMenuCaption="形状轮廓"
sdxRichEditCommandChangeFloatingObjectOutlineWidthDescription="指定所选形状轮廓的宽度."
sdxRichEditCommandChangeFloatingObjectOutlineWidthMenuCaption="形状轮廓宽度"
sdxRichEditCommandChangeFloatingObjectTextWrapTypeDescription="更改所选对象周围的文字环绕方式。若要配置对象，以便它与周围的文字一起移动，请选择 \"与文本对齐\"."
sdxRichEditCommandChangeFloatingObjectTextWrapTypeMenuCaption="自动换行"
sdxRichEditCommandChangeFontColorDescription="改变字体颜色."
sdxRichEditCommandChangeFontColorMenuCaption="字体颜色"
sdxRichEditCommandChangeFontNameDescription="改变字体外观."
sdxRichEditCommandChangeFontNameMenuCaption="字体"
sdxRichEditCommandChangeFontSizeDescription="改变字体大小."
sdxRichEditCommandChangeFontSizeMenuCaption="字体大小"
sdxRichEditCommandChangeIndentDescription="ChangeIndentDescription"
sdxRichEditCommandChangeIndentMenuCaption="ChangeIndent"
sdxRichEditCommandChangeLanguageDescription="设置用于拼写和语法检查的所选文字的语言."
sdxRichEditCommandChangeLanguageMenuCaption="语言"
sdxRichEditCommandChangeMistakenWordDescription="(没有拼写建议)"
sdxRichEditCommandChangeMistakenWordMenuCaption="(没有拼写建议)"
sdxRichEditCommandChangeNoProofDescription="更改没有证据"
sdxRichEditCommandChangeNoProofMenuCaption="NoProof"
sdxRichEditCommandChangePageColorDescription="选择页面的背景颜色."
sdxRichEditCommandChangePageColorMenuCaption="页面颜色"
sdxRichEditCommandChangeParagraphBackColorDescription="更改所选段落的背景."
sdxRichEditCommandChangeParagraphBackColorMenuCaption="阴影"
sdxRichEditCommandChangeParagraphLineSpacingDescription="更改文本行之间的间距.\r\\n\r\\n您还可以自定义添加段落之前和之后的空间量."
sdxRichEditCommandChangeParagraphLineSpacingMenuCaption="行间距"
sdxRichEditCommandChangeParagraphRightIndentDescription="ChangeParagraphRightIndentDescription"
sdxRichEditCommandChangeParagraphRightIndentMenuCaption="ChangeParagraphRightIndent"
sdxRichEditCommandChangeParagraphStyleDescription="ChangeParagraphStyle"
sdxRichEditCommandChangeParagraphStyleMenuCaption="ChangeParagraphStyle"
sdxRichEditCommandChangeSectionLineNumberingDescription="添加行号."
sdxRichEditCommandChangeSectionLineNumberingMenuCaption="行号"
sdxRichEditCommandChangeSectionPageMarginsDescription="选择整个文档或当前节的边距大小."
sdxRichEditCommandChangeSectionPageMarginsMenuCaption="边距"
sdxRichEditCommandChangeSectionPageOrientationDescription="切换页面的纵向和横向版式."
sdxRichEditCommandChangeSectionPageOrientationMenuCaption="方向"
sdxRichEditCommandChangeSectionPagePaperKindDescription="选择当前节的纸张大小."
sdxRichEditCommandChangeSectionPagePaperKindMenuCaption="尺寸"
sdxRichEditCommandChangeStyleDescription="标题格式、应用和其他文本使用此样式库."
sdxRichEditCommandChangeStyleMenuCaption="快速样式"
sdxRichEditCommandChangeTableBordersDescription="自定义所选单元格的边框."
sdxRichEditCommandChangeTableBordersMenuCaption="边框"
sdxRichEditCommandChangeTableCellAlignmentPlaceholderDescription="自定义选定的单元格的对齐方式."
sdxRichEditCommandChangeTableCellAlignmentPlaceholderMenuCaption="对齐"
sdxRichEditCommandChangeTableCellsContentAlignmentDescription="单元格对齐方式"
sdxRichEditCommandChangeTableCellsContentAlignmentMenuCaption="单元格对齐方式"
sdxRichEditCommandChangeTableCellShadingDescription="所选单元格的背景色."
sdxRichEditCommandChangeTableCellShadingMenuCaption="阴影"
sdxRichEditCommandChangeTextCaseDescription="将所有选定的文本更改为全部大写，小写字母，或其他通用大写."
sdxRichEditCommandChangeTextCaseMenuCaption="更改大小写"
sdxRichEditCommandCheckSpellingDescription="对文档中的文本进行拼写检查."
sdxRichEditCommandCheckSpellingMenuCaption="拼写检查"
sdxRichEditCommandCheckSyntaxDescription="CheckSyntax"
sdxRichEditCommandCheckSyntaxMenuCaption="CheckSyntax"
sdxRichEditCommandClearFormattingDescription="清除所有所选内容格式，只留下纯文本."
sdxRichEditCommandClearFormattingMenuCaption="清除格式"
sdxRichEditCommandClearUndoDescription="清除撤消缓冲区"
sdxRichEditCommandClearUndoMenuCaption="ClearUndo"
sdxRichEditCommandClosePageHeaderFooterDescription="关闭页眉和页脚工具.\r\\n\r\\n您也可以双击文档区域以返回到编辑它."
sdxRichEditCommandClosePageHeaderFooterMenuCaption="关闭页眉和页脚"
sdxRichEditCommandCollapseOrExpandFormulaBarDescription="折叠或展开公式栏(Ctrl+Shift+U)"
sdxRichEditCommandCollapseOrExpandFormulaBarMenuCaption="折叠或展开公式栏"
sdxRichEditCommandCommentDescription="选择突出显示文档中的注释."
sdxRichEditCommandCommentMenuCaption="查看注释"
sdxRichEditCommandCopySelectionDescription="复制所选内容并把它放在剪贴板上."
sdxRichEditCommandCopySelectionMenuCaption="复制(&C)"
sdxRichEditCommandCreateBookmarkDescription="创建书签"
sdxRichEditCommandCreateBookmarkMenuCaption="创建书签"
sdxRichEditCommandCreateCommentDescription="创建注释"
sdxRichEditCommandCreateCommentMenuCaption="创建注释"
sdxRichEditCommandCreateFieldDescription="创建域"
sdxRichEditCommandCreateFieldMenuCaption="创建域"
sdxRichEditCommandCreateHyperlinkDescription="CreateHyperlinkDescription"
sdxRichEditCommandCreateHyperlinkMenuCaption="CreateHyperlink"
sdxRichEditCommandCutSelectionDescription="剪切所选内容从文档并把它放在剪贴板上."
sdxRichEditCommandCutSelectionMenuCaption="剪切(&T)"
sdxRichEditCommandDecreaseFontSizeDescription="减小字体大小."
sdxRichEditCommandDecreaseFontSizeMenuCaption="缩小字体"
sdxRichEditCommandDecrementFontSizeDescription="DecrementFontSize"
sdxRichEditCommandDecrementFontSizeMenuCaption="DecrementFontSize"
sdxRichEditCommandDecrementIndentDescription="减少段落的缩进量."
sdxRichEditCommandDecrementIndentMenuCaption="减少缩进量"
sdxRichEditCommandDecrementNumerationFromParagraphDescription="DecrementNumerationFromParagraph"
sdxRichEditCommandDecrementNumerationFromParagraphMenuCaption="DecrementNumerationFromParagraph"
sdxRichEditCommandDecrementParagraphLeftIndentDescription="DecrementParagraphLeftIndentDescription"
sdxRichEditCommandDecrementParagraphLeftIndentMenuCaption="DecrementParagraphLeftIndent"
sdxRichEditCommandDecrementParagraphOutlineLevelDescription="降低大纲级别"
sdxRichEditCommandDecrementParagraphOutlineLevelMenuCaption="降低大纲级别"
sdxRichEditCommandDeleteBackCoreDescription="DeleteBackCoreDescription"
sdxRichEditCommandDeleteBackCoreMenuCaption="DeleteBackCore"
sdxRichEditCommandDeleteBackDescription="DeleteBack"
sdxRichEditCommandDeleteBackMenuCaption="DeleteBack"
sdxRichEditCommandDeleteBookmarkDescription="删除书签"
sdxRichEditCommandDeleteBookmarkMenuCaption="删除书签"
sdxRichEditCommandDeleteCommentDescription="删除注释"
sdxRichEditCommandDeleteCommentMenuCaption="删除注释"
sdxRichEditCommandDeleteCoreDescription="DeleteCoreDescription"
sdxRichEditCommandDeleteCoreMenuCaption="DeleteCore"
sdxRichEditCommandDeleteDescription="删除"
sdxRichEditCommandDeleteMenuCaption="删除"
sdxRichEditCommandDeleteNumerationFromParagraphDescription="DeleteNumerationFromParagraph"
sdxRichEditCommandDeleteNumerationFromParagraphMenuCaption="DeleteNumerationFromParagraph"
sdxRichEditCommandDeleteRepeatedWordDescription="删除重复的单词"
sdxRichEditCommandDeleteRepeatedWordMenuCaption="删除重复的单词"
sdxRichEditCommandDeleteTableCellsDescription="删除行、列或单元格."
sdxRichEditCommandDeleteTableCellsMenuCaption="删除单元格..."
sdxRichEditCommandDeleteTableCellsMenuItem="删除单元格..."
sdxRichEditCommandDeleteTableColumnsDescription="删除列"
sdxRichEditCommandDeleteTableColumnsMenuCaption="删除列"
sdxRichEditCommandDeleteTableDescription="删除整个表格."
sdxRichEditCommandDeleteTableElementsDescription="删除行、列、单元格或整个表格."
sdxRichEditCommandDeleteTableElementsMenuCaption="删除"
sdxRichEditCommandDeleteTableMenuCaption="删除表"
sdxRichEditCommandDeleteTableRowsDescription="删除行"
sdxRichEditCommandDeleteTableRowsMenuCaption="删除行"
sdxRichEditCommandDeleteTableStyleMenuCaption="删除表格样式..."
sdxRichEditCommandDeleteWordBackCoreDescription="DeleteWordBack"
sdxRichEditCommandDeleteWordBackCoreMenuCaption="DeleteWordBack"
sdxRichEditCommandDeleteWordBackDescription="DeleteWordBack"
sdxRichEditCommandDeleteWordBackMenuCaption="DeleteWordBack"
sdxRichEditCommandDeleteWordCoreDescription="DeleteWordCoreDescription"
sdxRichEditCommandDeleteWordCoreMenuCaption="DeleteWordCore"
sdxRichEditCommandDeleteWordDescription="DeleteWord"
sdxRichEditCommandDeleteWordMenuCaption="DeleteWord"
sdxRichEditCommandDeselectAllDescription="重置文档选择."
sdxRichEditCommandDeselectAllMenuCaption="取消全选"
sdxRichEditCommandDraftViewDescription="草稿视图"
sdxRichEditCommandDraftViewMenuCaption="草稿视图"
sdxRichEditCommandEditHyperlinkDescription="编辑超链接..."
sdxRichEditCommandEditHyperlinkMenuCaption="编辑超链接..."
sdxRichEditCommandEditPageFooterDescription="编辑文档的页脚.\r\\n\r\\n在页脚中的内容将显示在每个打印页的底部."
sdxRichEditCommandEditPageFooterMenuCaption="页脚"
sdxRichEditCommandEditPageHeaderDescription="编辑文档的页眉中.\r\\n\r\\n标头中的内容将出现在每个打印页的顶部."
sdxRichEditCommandEditPageHeaderMenuCaption="标头"
sdxRichEditCommandEditTOCMenuCaption="编辑表的内容..."
sdxRichEditCommandFindDescription="在文档中查找文本."
sdxRichEditCommandFindMenuCaption="查找"
sdxRichEditCommandFindNextDescription="重复上次搜索."
sdxRichEditCommandFindNextMenuCaption="查找下一个"
sdxRichEditCommandFindPrevDescription="重复上次搜索落后."
sdxRichEditCommandFindPrevMenuCaption="查找上一条"
sdxRichEditCommandFirstDataRecordDescription="第一条记录"
sdxRichEditCommandFirstDataRecordMenuCaption="第一条记录"
sdxRichEditCommandFitHeightDescription="调整文档的缩放比例来编辑表面尺寸使整个页面高度."
sdxRichEditCommandFitHeightMenuCaption="适应高度"
sdxRichEditCommandFitToPageDescription="调整文档的缩放比例，以适应整个页面编辑表面尺寸."
sdxRichEditCommandFitToPageMenuCaption="适合页面"
sdxRichEditCommandFitWidthDescription="调整文档的缩放比例、，以适应整个页面宽度对编辑的表面尺寸."
sdxRichEditCommandFitWidthMenuCaption="适应宽度"
sdxRichEditCommandFloatingObjectBringForwardDescription="置后选择的对象,它将被在它之前的对象隐藏."
sdxRichEditCommandFloatingObjectBringForwardMenuCaption="置后"
sdxRichEditCommandFloatingObjectBringForwardPlaceholderDescription="置前选择的对象,它将被它之后的对象隐藏."
sdxRichEditCommandFloatingObjectBringForwardPlaceholderMenuCaption="置前"
sdxRichEditCommandFloatingObjectBringInFrontOfTextDescription=" "
sdxRichEditCommandFloatingObjectBringInFrontOfTextMenuCaption="浮于文字上方"
sdxRichEditCommandFloatingObjectBringToFrontDescription="浮于文字上方."
sdxRichEditCommandFloatingObjectBringToFrontMenuCaption="置前"
sdxRichEditCommandFloatingObjectSendBackwardDescription="下移所选的对象，它隐藏在它前面的对象下."
sdxRichEditCommandFloatingObjectSendBackwardMenuCaption="下移一层"
sdxRichEditCommandFloatingObjectSendBackwardPlaceholderDescription="下移所选的对象，它隐藏在它前面的对象下."
sdxRichEditCommandFloatingObjectSendBackwardPlaceholderMenuCaption="置后"
sdxRichEditCommandFloatingObjectSendBehindTextDescription=" "
sdxRichEditCommandFloatingObjectSendBehindTextMenuCaption="衬于文字下方"
sdxRichEditCommandFloatingObjectSendToBackDescription="衬于文字下方."
sdxRichEditCommandFloatingObjectSendToBackMenuCaption="置后"
sdxRichEditCommandFontSubscriptDescription="在文本行下方键入非常小的文字."
sdxRichEditCommandFontSubscriptMenuCaption="下标"
sdxRichEditCommandFontSuperscriptDescription="在文本行上方键入非常小的文字."
sdxRichEditCommandFontSuperscriptMenuCaption="上标"
sdxRichEditCommandGoToNextHeaderFooterDescription="导航到下一节的页眉或页脚."
sdxRichEditCommandGoToNextHeaderFooterMenuCaption="显示下一个"
sdxRichEditCommandGoToPageDescription="转到页面"
sdxRichEditCommandGoToPageFooterDescription="激活此页的页脚，以便您可以编辑它."
sdxRichEditCommandGoToPageFooterMenuCaption="转到页脚"
sdxRichEditCommandGoToPageHeaderDescription="激活此页上的标题，以便您可以编辑它."
sdxRichEditCommandGoToPageHeaderMenuCaption="转到标题"
sdxRichEditCommandGoToPageMenuCaption="转到页面"
sdxRichEditCommandGoToPreviousHeaderFooterDescription="导航到前一节页眉或页脚."
sdxRichEditCommandGoToPreviousHeaderFooterMenuCaption="显示上一个"
sdxRichEditCommandHighlightTextDescription="使文本看起来像用荧光笔作了标记."
sdxRichEditCommandHighlightTextMenuCaption="文字高亮颜色"
sdxRichEditCommandHyperlinkDescription="超链接..."
sdxRichEditCommandHyperlinkMenuCaption="超链接..."
sdxRichEditCommandIgnoreAllMistakenWordsDescription="全部忽略"
sdxRichEditCommandIgnoreAllMistakenWordsMenuCaption="全部忽略"
sdxRichEditCommandIgnoreMistakenWordDescription="忽略"
sdxRichEditCommandIgnoreMistakenWordMenuCaption="忽略"
sdxRichEditCommandIncreaseFontSizeDescription="增加字体大小."
sdxRichEditCommandIncreaseFontSizeMenuCaption="增大字体"
sdxRichEditCommandIncrementIndentDescription="增加段落的缩进量."
sdxRichEditCommandIncrementIndentMenuCaption="增加缩进量"
sdxRichEditCommandIncrementParagraphOutlineLevelDescription="提高大纲级别"
sdxRichEditCommandIncrementParagraphOutlineLevelMenuCaption="提高大纲级别"
sdxRichEditCommandInsertBreakDescription="向文档中添加页、节或分栏符."
sdxRichEditCommandInsertBreakMenuCaption="分栏符"
sdxRichEditCommandInsertBulletListDescription="开始创建项目符号列表."
sdxRichEditCommandInsertBulletListMenuCaption="项目符号"
sdxRichEditCommandInsertCaptionPlaceholderDescription="为图片或其他图像添加注释。\\n\\n注释是文本对象,用来描述它的下方显示的行."
sdxRichEditCommandInsertCaptionPlaceholderMenuCaption="插入标题"
sdxRichEditCommandInsertColumnBreakDescription="显示分栏符后面的文本将在下一列开始."
sdxRichEditCommandInsertColumnBreakMenuCaption="列"
sdxRichEditCommandInsertEquationsCaptionDescription="添加一个相等的标题."
sdxRichEditCommandInsertEquationsCaptionMenuCaption="相等的标题"
sdxRichEditCommandInsertFiguresCaptionDescription="添加一个图表标题."
sdxRichEditCommandInsertFiguresCaptionMenuCaption="图表标题"
sdxRichEditCommandInsertFloatingObjectPictureDescription="插入来自文件的图片."
sdxRichEditCommandInsertFloatingObjectPictureMenuCaption="图片"
sdxRichEditCommandInsertMergeFieldDescription="插入合并域."
sdxRichEditCommandInsertMergeFieldMenuCaption="插入合并域"
sdxRichEditCommandInsertMultilevelListDescription="启动多级列表."
sdxRichEditCommandInsertMultilevelListMenuCaption="多级列表"
sdxRichEditCommandInsertPageBreak2Description="从当前位置开始下一页."
sdxRichEditCommandInsertPageBreak2MenuCaption="分页符"
sdxRichEditCommandInsertPageBreakDescription="从当前位置开始下一页."
sdxRichEditCommandInsertPageBreakMenuCaption="页面"
sdxRichEditCommandInsertPageCountFieldDescription="插入文档的总页数."
sdxRichEditCommandInsertPageCountFieldMenuCaption="页总数"
sdxRichEditCommandInsertPageNumberFieldDescription="向文档中插入页码."
sdxRichEditCommandInsertPageNumberFieldMenuCaption="页数"
sdxRichEditCommandInsertPictureDescription="从文件中插入内嵌图片."
sdxRichEditCommandInsertPictureMenuCaption="内嵌图片"
sdxRichEditCommandInsertSectionBreakContinuousDescription="插入一个分节符并在同一页上开始新节."
sdxRichEditCommandInsertSectionBreakContinuousMenuCaption="节 (连续)"
sdxRichEditCommandInsertSectionBreakEvenPageDescription="插入一个分节符并在下一个偶数页上开始新节."
sdxRichEditCommandInsertSectionBreakEvenPageMenuCaption="节 (偶数页)"
sdxRichEditCommandInsertSectionBreakNextPageDescription="插入一个分节符并在下一页上开始新节."
sdxRichEditCommandInsertSectionBreakNextPageMenuCaption="节 (下一页)"
sdxRichEditCommandInsertSectionBreakOddPageDescription="插入一个分节符并在下一个奇数页上开始新节."
sdxRichEditCommandInsertSectionBreakOddPageMenuCaption="节 (奇数页)"
sdxRichEditCommandInsertSimpleListDescription="开始创建编号的列表."
sdxRichEditCommandInsertSimpleListMenuCaption="编号"
sdxRichEditCommandInsertSymbolDescription="不用键盘插入符号，如版权符号、 商标符号、 段落标记和 Unicode 字符的符号."
sdxRichEditCommandInsertSymbolMenuCaption="符号"
sdxRichEditCommandInsertTabDescription="InsertTab"
sdxRichEditCommandInsertTableCellsDescription="插入单元格"
sdxRichEditCommandInsertTableCellsMenuCaption="插入单元格"
sdxRichEditCommandInsertTableColumnToTheLeftDescription="直接向所选列的左边添加一个新列."
sdxRichEditCommandInsertTableColumnToTheLeftMenuCaption="在左边插入"
sdxRichEditCommandInsertTableColumnToTheRightDescription="直接向所选列的右侧添加一个新列."
sdxRichEditCommandInsertTableColumnToTheRightMenuCaption="在右边插入"
sdxRichEditCommandInsertTableDescription="向文档中插入一个表."
sdxRichEditCommandInsertTableElementMenuCaption="插入"
sdxRichEditCommandInsertTableMenuCaption="表格"
sdxRichEditCommandInsertTableOfContentsDescription="向文档中添加内容表.\\n\\n一旦你添加了内容表格中，单击添加文本按钮来添加条目的表."
sdxRichEditCommandInsertTableOfContentsMenuCaption="表格内容"
sdxRichEditCommandInsertTableOfEquationsDescription="插入一个相同的表格到文档中.\\n\\n插入的表格与原表格完全相同，包括公式."
sdxRichEditCommandInsertTableOfEquationsMenuCaption="相同的表格"
sdxRichEditCommandInsertTableOfFiguresDescription="文档中插入一个数字表。\\n\\n数字表包含文档中所有的数字列表."
sdxRichEditCommandInsertTableOfFiguresMenuCaption="图表目录"
sdxRichEditCommandInsertTableOfFiguresPlaceholderDescription="文档中插入一个数字表.\\n\\n数字表包含文档中所有的人物、 表或方程的列表."
sdxRichEditCommandInsertTableOfFiguresPlaceholderMenuCaption="插入图表目录"
sdxRichEditCommandInsertTableOfTablesDescription="插入图表目录."
sdxRichEditCommandInsertTableOfTablesMenuCaption="表中表"
sdxRichEditCommandInsertTableRowAboveDescription="在所选行的上方添加新行."
sdxRichEditCommandInsertTableRowAboveMenuCaption="在上方插入"
sdxRichEditCommandInsertTableRowBelowDescription="在所选行的下方添加新行."
sdxRichEditCommandInsertTableRowBelowMenuCaption="下方插入"
sdxRichEditCommandInsertTablesCaptionDescription="添加表格标题."
sdxRichEditCommandInsertTablesCaptionMenuCaption="表格标题"
sdxRichEditCommandInsertTextBoxDescription="插入一个文本框到文档中."
sdxRichEditCommandInsertTextBoxMenuCaption="文本框"
sdxRichEditCommandLanguageDescription="设置用于拼写和语法检查的所选文字的语言."
sdxRichEditCommandLanguageMenuCaption="语言"
sdxRichEditCommandLastDataRecordDescription="最后一条记录"
sdxRichEditCommandLastDataRecordMenuCaption="最后一条记录"
sdxRichEditCommandLoadDocumentDescription="打开一个文档."
sdxRichEditCommandLoadDocumentMenuCaption="打开"
sdxRichEditCommandMailMergeSaveDocumentAsCommandDescription="邮件合并"
sdxRichEditCommandMailMergeSaveDocumentAsCommandMenuCaption="邮件合并"
sdxRichEditCommandMakeTextLowerCaseDescription="将所有选定的文本更改为小写."
sdxRichEditCommandMakeTextLowerCaseMenuCaption="小写"
sdxRichEditCommandMakeTextUpperCaseDescription="将所有选定的文本更改为全部大写."
sdxRichEditCommandMakeTextUpperCaseMenuCaption="大写"
sdxRichEditCommandMergeTableCellsDescription="将所选单元格合并为一个单元格."
sdxRichEditCommandMergeTableCellsMenuCaption="合并单元格"
sdxRichEditCommandModifyTableStyleMenuCaption="修改表格样式..."
sdxRichEditCommandNewEmptyDocumentDescription="创建一个新的文档."
sdxRichEditCommandNewEmptyDocumentMenuCaption="新建"
sdxRichEditCommandNewTableStyleMenuCaption="新建表格样式..."
sdxRichEditCommandNextDataRecordDescription="下一条记录"
sdxRichEditCommandNextDataRecordMenuCaption="下一条记录"
sdxRichEditCommandOpenHyperlinkDescription="打开超链接"
sdxRichEditCommandOpenHyperlinkMenuCaption="打开超链接"
sdxRichEditCommandParagraphAlignmentCenterDescription="文本居中."
sdxRichEditCommandParagraphAlignmentCenterMenuCaption="居中(&C)"
sdxRichEditCommandParagraphAlignmentJustifyDescription="将文本与页边距的左和右，添加额外的空间，作为必要的单词之间的对齐。\r\\n\r\\n这将创建一个干净的外观，沿左侧和右侧的页面."
sdxRichEditCommandParagraphAlignmentJustifyMenuCaption="两端对齐(&J)"
sdxRichEditCommandParagraphAlignmentLeftDescription="将文本向左对齐."
sdxRichEditCommandParagraphAlignmentLeftMenuCaption="文本左对齐(&L)"
sdxRichEditCommandParagraphAlignmentRightDescription="将文本向右对齐."
sdxRichEditCommandParagraphAlignmentRightMenuCaption="右对齐文本(&R)"
sdxRichEditCommandParagraphSuppressHyphenationDescription="抑制当前段落断字功能"
sdxRichEditCommandParagraphSuppressHyphenationMenuCaption="抑制当前段落断字功能"
sdxRichEditCommandParagraphSuppressLineNumbersDescription="取消当前段落"
sdxRichEditCommandParagraphSuppressLineNumbersMenuCaption="取消当前段落"
sdxRichEditCommandPasteDescription="粘贴剪贴板的内容."
sdxRichEditCommandPasteFilesDescription="作为嵌入式文件插入剪贴板的内容."
sdxRichEditCommandPasteFilesMenuCaption="文件"
sdxRichEditCommandPasteHtmlTextDescription="插入剪贴板的内容作为 HTML 格式."
sdxRichEditCommandPasteHtmlTextMenuCaption="HTML格式"
sdxRichEditCommandPasteImageDescription="将剪贴板中的内容作为图片插入."
sdxRichEditCommandPasteImageMenuCaption="图片"
sdxRichEditCommandPasteMenuCaption="粘贴(&P)"
sdxRichEditCommandPasteMetafileImageDescription="插入剪贴板的内容作为图元文件."
sdxRichEditCommandPasteMetafileImageMenuCaption="图元文件"
sdxRichEditCommandPastePlainTextDescription="将剪贴板中的内容作为文本插入不带任何格式."
sdxRichEditCommandPastePlainTextMenuCaption="无格式的文本"
sdxRichEditCommandPasteRtfTextDescription="将剪贴板中的内容作为文本插入带有字体和表格格式."
sdxRichEditCommandPasteRtfTextMenuCaption="带格式的文本(RTF)"
sdxRichEditCommandPasteSilverlightXamlTextDescription="将剪贴板中的内容作为文本插入与字体格式."
sdxRichEditCommandPasteSilverlightXamlTextMenuCaption="格式化的文本(XAML)"
sdxRichEditCommandPreviousDataRecordDescription="上一条记录"
sdxRichEditCommandPreviousDataRecordMenuCaption="上一条记录"
sdxRichEditCommandPrintDescription="选择一台打印机，副本，数目和其他打印选项打印前."
sdxRichEditCommandPrintMenuCaption="打印(&P)"
sdxRichEditCommandPrintPreviewDescription="在打印前预览页面."
sdxRichEditCommandPrintPreviewMenuCaption="打印预览(&V)"
sdxRichEditCommandPrintViewDescription="打印视图"
sdxRichEditCommandPrintViewMenuCaption="打印视图"
sdxRichEditCommandProtectDocumentDescription="帮助从编辑文档通过指定密码限制的人."
sdxRichEditCommandProtectDocumentMenuCaption="保护文档"
sdxRichEditCommandQuickPrintDescription="该文件将直接发送到默认打印机不需要更改."
sdxRichEditCommandQuickPrintMenuCaption="快速打印(&Q)"
sdxRichEditCommandReadingViewDescription="阅读视图"
sdxRichEditCommandReadingViewMenuCaption="阅读视图"
sdxRichEditCommandRedoDescription="重做最后一次操作."
sdxRichEditCommandRedoMenuCaption="重做(&R)"
sdxRichEditCommandRemoveHyperlinkDescription="删除超链接"
sdxRichEditCommandRemoveHyperlinkMenuCaption="删除超链接"
sdxRichEditCommandRemoveSpacingAfterParagraphDescription=" "
sdxRichEditCommandRemoveSpacingAfterParagraphMenuCaption="删除段后的空格(&A)"
sdxRichEditCommandRemoveSpacingBeforeParagraphDescription=" "
sdxRichEditCommandRemoveSpacingBeforeParagraphMenuCaption="删除段前的空格(&B)"
sdxRichEditCommandReplaceDescription="替换文档中的文字."
sdxRichEditCommandReplaceMenuCaption="替换"
sdxRichEditCommandResetCharacterFormattingDescription="使选定内容应用样式的默认字符格式."
sdxRichEditCommandResetCharacterFormattingMenuCaption="重新设置字符格式"
sdxRichEditCommandResetTableCellsBordersDescription="自定义所选单元格的边框."
sdxRichEditCommandResetTableCellsBordersMenuCaption="无边框(&N)"
sdxRichEditCommandReviewersDescription="选择的审阅的批注，以在文档中突出显示."
sdxRichEditCommandReviewersMenuCaption="审阅"
sdxRichEditCommandReviewingPaneDescription="显示或隐藏一个单独的窗口中的文档注释."
sdxRichEditCommandReviewingPaneMenuCaption="审阅窗格"
sdxRichEditCommandSaveDocumentAsDescription="打开另存为对话框选择一种文件格式，并将文档保存到新的位置."
sdxRichEditCommandSaveDocumentAsMenuCaption="另存为"
sdxRichEditCommandSaveDocumentDescription="保存文档."
sdxRichEditCommandSaveDocumentMenuCaption="保存"
sdxRichEditCommandScrollDownDescription="向下滚动"
sdxRichEditCommandScrollDownMenuCaption="向下滚动"
sdxRichEditCommandSelectAllDescription="选择整个文档的内容."
sdxRichEditCommandSelectAllMenuCaption="全选(&A)"
sdxRichEditCommandSelectBookmarkDescription="选择书签"
sdxRichEditCommandSelectBookmarkMenuCaption="选择书签"
sdxRichEditCommandSelectCommentDescription="选择注释"
sdxRichEditCommandSelectCommentMenuCaption="选择注释"
sdxRichEditCommandSelectTableCellDescription="选择单元格"
sdxRichEditCommandSelectTableCellMenuCaption="选择单元格"
sdxRichEditCommandSelectTableColumnsDescription="选择列"
sdxRichEditCommandSelectTableColumnsMenuCaption="选择列"
sdxRichEditCommandSelectTableDescription="选择表格"
sdxRichEditCommandSelectTableElementsDescription="选择当前单元格、行、列或整个表格."
sdxRichEditCommandSelectTableElementsMenuCaption="选择"
sdxRichEditCommandSelectTableMenuCaption="选择表格"
sdxRichEditCommandSelectTableRowDescription="选择行"
sdxRichEditCommandSelectTableRowMenuCaption="选择行"
sdxRichEditCommandSetDoubleParagraphSpacingDescription=" "
sdxRichEditCommandSetDoubleParagraphSpacingMenuCaption="2.0"
sdxRichEditCommandSetFloatingObjectBehindTextWrapTypeDescription=" "
sdxRichEditCommandSetFloatingObjectBehindTextWrapTypeMenuCaption="在文本后面"
sdxRichEditCommandSetFloatingObjectBottomCenterAlignmentDescription="底部居中，四周型文字环绕"
sdxRichEditCommandSetFloatingObjectBottomCenterAlignmentMenuCaption="底部居中"
sdxRichEditCommandSetFloatingObjectBottomLeftAlignmentDescription="在底部的位置留下四周型文字环绕"
sdxRichEditCommandSetFloatingObjectBottomLeftAlignmentMenuCaption="下左"
sdxRichEditCommandSetFloatingObjectBottomRightAlignmentDescription="位置在底端居右，四周型文字环绕"
sdxRichEditCommandSetFloatingObjectBottomRightAlignmentMenuCaption="下右"
sdxRichEditCommandSetFloatingObjectInFrontOfTextWrapTypeDescription=" "
sdxRichEditCommandSetFloatingObjectInFrontOfTextWrapTypeMenuCaption="在文本前面"
sdxRichEditCommandSetFloatingObjectMiddleCenterAlignmentDescription="中部居中，四周型文字环绕"
sdxRichEditCommandSetFloatingObjectMiddleCenterAlignmentMenuCaption="中部居中"
sdxRichEditCommandSetFloatingObjectMiddleLeftAlignmentDescription="位置在中间居左，四周型文字环绕"
sdxRichEditCommandSetFloatingObjectMiddleLeftAlignmentMenuCaption="中部居左"
sdxRichEditCommandSetFloatingObjectMiddleRightAlignmentDescription="在右，四周型文字环绕中间位置"
sdxRichEditCommandSetFloatingObjectMiddleRightAlignmentMenuCaption="中部居右"
sdxRichEditCommandSetFloatingObjectSquareTextWrapTypeDescription=" "
sdxRichEditCommandSetFloatingObjectSquareTextWrapTypeMenuCaption="正方"
sdxRichEditCommandSetFloatingObjectThroughTextWrapTypeDescription=" "
sdxRichEditCommandSetFloatingObjectThroughTextWrapTypeMenuCaption="穿过"
sdxRichEditCommandSetFloatingObjectTightTextWrapTypeDescription=" "
sdxRichEditCommandSetFloatingObjectTightTextWrapTypeMenuCaption="紧密"
sdxRichEditCommandSetFloatingObjectTopAndBottomTextWrapTypeDescription=" "
sdxRichEditCommandSetFloatingObjectTopAndBottomTextWrapTypeMenuCaption="顶部和底部"
sdxRichEditCommandSetFloatingObjectTopCenterAlignmentDescription="顶部居中，四周型文字环绕"
sdxRichEditCommandSetFloatingObjectTopCenterAlignmentMenuCaption="顶部居中"
sdxRichEditCommandSetFloatingObjectTopLeftAlignmentDescription="在顶部的位置留下四周型文字环绕"
sdxRichEditCommandSetFloatingObjectTopLeftAlignmentMenuCaption="上左"
sdxRichEditCommandSetFloatingObjectTopRightAlignmentDescription="顶端居右，四周型文字环绕"
sdxRichEditCommandSetFloatingObjectTopRightAlignmentMenuCaption="上右"
sdxRichEditCommandSetLandscapePageOrientationDescription=" "
sdxRichEditCommandSetLandscapePageOrientationMenuCaption="横向"
sdxRichEditCommandSetModerateSectionPageMarginsDescription=" "
sdxRichEditCommandSetModerateSectionPageMarginsMenuCaption="适中\r\\n顶部:\t{1,10}\t底部:\t{3,10}\r\\n左:\t{0,10}\t右:\t\t{2,10}"
sdxRichEditCommandSetNarrowSectionPageMarginsDescription=" "
sdxRichEditCommandSetNarrowSectionPageMarginsMenuCaption="狭窄\r\\n顶部:\t{1,10}\t底部:\t{3,10}\r\\n左:\t{0,10}\t右:\t\t{2,10}"
sdxRichEditCommandSetNormalSectionPageMarginsDescription=" "
sdxRichEditCommandSetNormalSectionPageMarginsMenuCaption="正常\r\\n顶部:\t{1,10}\t底部:\t{3,10}\r\\n左:\t{0,10}\t右:\t\t{2,10}"
sdxRichEditCommandSetParagraphBodyTextLevelDescription="不在表内容中显示"
sdxRichEditCommandSetParagraphBodyTextLevelMenuCaption="不在表内容中显示"
sdxRichEditCommandSetParagraphHeadingLevelDescription="等级{0}"
sdxRichEditCommandSetParagraphHeadingLevelMenuCaption="等级{0}"
sdxRichEditCommandSetPortraitPageOrientationDescription=" "
sdxRichEditCommandSetPortraitPageOrientationMenuCaption="纵向"
sdxRichEditCommandSetSectionColumnsDescription="将文本拆分为两个或多个列."
sdxRichEditCommandSetSectionColumnsMenuCaption="列"
sdxRichEditCommandSetSectionLineNumberingContinuousDescription="连续"
sdxRichEditCommandSetSectionLineNumberingContinuousMenuCaption="连续"
sdxRichEditCommandSetSectionLineNumberingNoneDescription="无行号."
sdxRichEditCommandSetSectionLineNumberingNoneMenuCaption="无"
sdxRichEditCommandSetSectionLineNumberingRestartNewPageDescription="重置每一页"
sdxRichEditCommandSetSectionLineNumberingRestartNewPageMenuCaption="重置每一页"
sdxRichEditCommandSetSectionLineNumberingRestartNewSectionDescription="重置每一段"
sdxRichEditCommandSetSectionLineNumberingRestartNewSectionMenuCaption="重置每一段"
sdxRichEditCommandSetSectionOneColumnDescription="一列."
sdxRichEditCommandSetSectionOneColumnMenuCaption="一"
sdxRichEditCommandSetSectionThreeColumnsDescription="三列."
sdxRichEditCommandSetSectionThreeColumnsMenuCaption="三"
sdxRichEditCommandSetSectionTwoColumnsDescription="两列."
sdxRichEditCommandSetSectionTwoColumnsMenuCaption="二"
sdxRichEditCommandSetSesquialteralParagraphSpacingDescription=" "
sdxRichEditCommandSetSesquialteralParagraphSpacingMenuCaption="1.5"
sdxRichEditCommandSetSingleParagraphSpacingDescription=" "
sdxRichEditCommandSetSingleParagraphSpacingMenuCaption="1.0"
sdxRichEditCommandSetWideSectionPageMarginsDescription=" "
sdxRichEditCommandSetWideSectionPageMarginsMenuCaption="宽阔\r\\n顶部:\t{1,10}\t底部:\t{3,10}\r\\n左:\t{0,10}\t右:\t\t{2,10}"
sdxRichEditCommandShowAllFieldCodesDescription="查看文档标记以显示其富文本代码的动态元素."
sdxRichEditCommandShowAllFieldCodesMenuCaption="显示所有的域代码"
sdxRichEditCommandShowAllFieldResultsDescription="查看文件的内容与显示实际数据的动态元素."
sdxRichEditCommandShowAllFieldResultsMenuCaption="显示所有域结果"
sdxRichEditCommandShowBookmarkFormDescription="创建一个书签，将名称分配给文档中的特定点\r\\n\r\\n您可以直接跳转到一个书签的位置的超链接."
sdxRichEditCommandShowBookmarkFormMenuCaption="书签"
sdxRichEditCommandShowColumnsSetupFormDescription="显示列对话框可自定义列宽."
sdxRichEditCommandShowColumnsSetupFormMenuCaption="更多列(&C)..."
sdxRichEditCommandShowCommentFormDescription="显示注释对话框."
sdxRichEditCommandShowCommentFormMenuCaption="注释"
sdxRichEditCommandShowEditStyleFormDescription="显示编辑样式对话框."
sdxRichEditCommandShowEditStyleFormMenuCaption="修改样式..."
sdxRichEditCommandShowFloatingObjectLayoutOptionsFormDescription="显示布局对话框."
sdxRichEditCommandShowFloatingObjectLayoutOptionsFormMenuCaption="更多布局选项..."
sdxRichEditCommandShowFontFormDescription="显示字体对话框."
sdxRichEditCommandShowFontFormMenuCaption="字体(&F)..."
sdxRichEditCommandShowHyperlinkFormDescription="创建一个链接到一个网页、 图片、 电子邮件地址或程序."
sdxRichEditCommandShowHyperlinkFormMenuCaption="超链接"
sdxRichEditCommandShowInsertMergeFieldFormDescription="向文档添加域从收件人列表或从一个数据表格."
sdxRichEditCommandShowInsertMergeFieldFormMenuCaption="插入合并域"
sdxRichEditCommandShowLineNumberingFormDescription="行号选项..."
sdxRichEditCommandShowLineNumberingFormMenuCaption="行号选项(&L)..."
sdxRichEditCommandShowLineSpacingFormDescription=" "
sdxRichEditCommandShowLineSpacingFormMenuCaption="行间距选项..."
sdxRichEditCommandShowMergeDatabaseRecordsFormDescription="合并到新的文档"
sdxRichEditCommandShowMergeDatabaseRecordsFormMenuCaption="合并到新的文档"
sdxRichEditCommandShowNumberingListDescription="显示编号列表对话框."
sdxRichEditCommandShowNumberingListMenuCaption="项目符号和编号(&B)..."
sdxRichEditCommandShowPageMarginsSetupFormDescription=" "
sdxRichEditCommandShowPageMarginsSetupFormMenuCaption="自定义边距(&A)..."
sdxRichEditCommandShowPagePaperSetupFormDescription=" "
sdxRichEditCommandShowPagePaperSetupFormMenuCaption="更多的纸张大小(&A)..."
sdxRichEditCommandShowPageSetupFormDescription="显示页面设置对话框."
sdxRichEditCommandShowPageSetupFormMenuCaption="页面设置"
sdxRichEditCommandShowParagraphFormDescription="显示段落对话框."
sdxRichEditCommandShowParagraphFormMenuCaption="段落(&A)..."
sdxRichEditCommandShowPasteSpecialFormDescription="选择性粘贴"
sdxRichEditCommandShowPasteSpecialFormMenuCaption="选择性粘贴"
sdxRichEditCommandShowRangeEditingPermissionsFormDescription="授予用户的权限来编辑文档的选定的部分."
sdxRichEditCommandShowRangeEditingPermissionsFormMenuCaption="编辑权限的范围"
sdxRichEditCommandShowSymbolDescription="显示符号对话框."
sdxRichEditCommandShowSymbolMenuCaption="符号"
sdxRichEditCommandShowTableOptionsFormDescription="自定义单元格边距和单元格之间的间距."
sdxRichEditCommandShowTableOptionsFormMenuCaption="单元格合并"
sdxRichEditCommandShowTablePropertiesFormDescription="显示表属性对话框来更改高级的表格属性，如缩进和文字环绕选项."
sdxRichEditCommandShowTablePropertiesFormDescriptionMenuItemMenuCaption="显示表属性对话框."
sdxRichEditCommandShowTablePropertiesFormMenuCaption="属性"
sdxRichEditCommandShowTablePropertiesFormMenuItemMenuCaption="表格属性..."
sdxRichEditCommandShowTabsFormDescription="制表符"
sdxRichEditCommandShowTabsFormMenuCaption="制表符..."
sdxRichEditCommandSimpleViewDescription="简单视图"
sdxRichEditCommandSimpleViewMenuCaption="简单视图"
sdxRichEditCommandSplitTableCellsDescription="将所选单元格拆分为多个新单元格."
sdxRichEditCommandSplitTableCellsMenuCaption="拆分单元格"
sdxRichEditCommandSplitTableCellsMenuItemMenuCaption="拆分单元格..."
sdxRichEditCommandSplitTableDescription="将表拆分为两个表.\r\\n\r\\n在所选的行将成为新表的第一行."
sdxRichEditCommandSplitTableMenuCaption="拆分表格"
sdxRichEditCommandSwitchToDraftViewDescription="作为草案若要快速编辑文本查看该文档.\r\\n\r\\n某些元素如页眉和页脚的文档将不会在此视图中可见."
sdxRichEditCommandSwitchToDraftViewMenuCaption="草稿视图"
sdxRichEditCommandSwitchToPrintLayoutViewDescription="它会出现在打印页上查看的文档."
sdxRichEditCommandSwitchToPrintLayoutViewMenuCaption="打印布局"
sdxRichEditCommandSwitchToSimpleViewDescription="查看文档作为一个简单的备忘录.\r\\n\r\\n这种观点忽略了要提请注意文本编辑页面布局."
sdxRichEditCommandSwitchToSimpleViewMenuCaption="简单视图"
sdxRichEditCommandSymbolFormInsertButtonMenuCaption="插入"
sdxRichEditCommandTabKeyDescription="TabKey"
sdxRichEditCommandTabKeyMenuCaption="TabKey"
sdxRichEditCommandToggleAuthorVisibilityDescription="切换作者可见性"
sdxRichEditCommandToggleAuthorVisibilityMenuCaption="切换作者可见性"
sdxRichEditCommandToggleBandedColumnDescription="显示镶边的列，这些列上的偶数列和奇数列的格式互不相同.\r\\n\r\\n这带可以使表更易于阅读."
sdxRichEditCommandToggleBandedColumnMenuCaption="带区列"
sdxRichEditCommandToggleBandedRowsDescription="显示镶边的行，这些行上的偶数行和奇数行的格式互不相同。\r\\n\r\\n这带可以使表更易于阅读."
sdxRichEditCommandToggleBandedRowsMenuCaption="带区行"
sdxRichEditCommandToggleDifferentFirstPageDescription="指定文档唯一的第一页的页眉和页脚."
sdxRichEditCommandToggleDifferentFirstPageMenuCaption="首页不同"
sdxRichEditCommandToggleDifferentOddAndEvenPagesDescription="指定奇数页应该有不同的页眉和页脚从偶数页."
sdxRichEditCommandToggleDifferentOddAndEvenPagesMenuCaption="不同的奇数页和偶数页"
sdxRichEditCommandToggleFieldCodesDescription="切换域代码"
sdxRichEditCommandToggleFieldCodesMenuCaption="切换域代码"
sdxRichEditCommandToggleFirstColumnDescription="显示表的第一列的特殊格式."
sdxRichEditCommandToggleFirstColumnMenuCaption="第一列"
sdxRichEditCommandToggleFirstRowDescription="显示表的第一行的特殊格式."
sdxRichEditCommandToggleFirstRowMenuCaption="标题行"
sdxRichEditCommandToggleFontBoldDescription="将选定的文本变为粗体."
sdxRichEditCommandToggleFontBoldMenuCaption="粗体(&B)"
sdxRichEditCommandToggleFontDoubleStrikeoutDescription="双删除线"
sdxRichEditCommandToggleFontDoubleStrikeoutMenuCaption="双删除线"
sdxRichEditCommandToggleFontDoubleUnderlineDescription="双下划线"
sdxRichEditCommandToggleFontDoubleUnderlineMenuCaption="双下划线"
sdxRichEditCommandToggleFontItalicDescription="将所选的文本设置为倾斜."
sdxRichEditCommandToggleFontItalicMenuCaption="斜体(&I)"
sdxRichEditCommandToggleFontStrikeoutDescription="画一条线穿过所选文本的中间."
sdxRichEditCommandToggleFontStrikeoutMenuCaption="删除线"
sdxRichEditCommandToggleFontUnderlineDescription="所选的文本添加下划线."
sdxRichEditCommandToggleFontUnderlineMenuCaption="下划线(&U)"
sdxRichEditCommandToggleHeaderFooterLinkToPreviousDescription="链接到前一节的页眉和页脚当前节中的包含上一节相同的内容."
sdxRichEditCommandToggleHeaderFooterLinkToPreviousMenuCaption="连接到前一页"
sdxRichEditCommandToggleHiddenTextDescription="隐藏."
sdxRichEditCommandToggleHiddenTextMenuCaption="隐藏"
sdxRichEditCommandToggleLastColumnDescription="显示表中最后一列的特殊格式."
sdxRichEditCommandToggleLastColumnMenuCaption="最后一列"
sdxRichEditCommandToggleLastRowDescription="显示表的最后一行的特殊格式."
sdxRichEditCommandToggleLastRowMenuCaption="总行数"
sdxRichEditCommandToggleOvertypeDescription="改写"
sdxRichEditCommandToggleOvertypeMenuCaption="改写"
sdxRichEditCommandToggleShowHorizontalRulerDescription="查看水平标尺上，用于测量和对齐文档中的对象."
sdxRichEditCommandToggleShowHorizontalRulerMenuCaption="水平标尺"
sdxRichEditCommandToggleShowTableGridLinesDescription="显示或隐藏表格中的网格线."
sdxRichEditCommandToggleShowTableGridLinesMenuCaption="查看网格线(&G)"
sdxRichEditCommandToggleShowVerticalRulerDescription="查看垂直标尺，用于测量和对齐文档中的对象."
sdxRichEditCommandToggleShowVerticalRulerMenuCaption="垂直标尺"
sdxRichEditCommandToggleSpellCheckAsYouTypeDescription="键入时检查拼写"
sdxRichEditCommandToggleSpellCheckAsYouTypeMenuCaption="键入时检查拼写"
sdxRichEditCommandToggleTableAutoFitContentsDescription="自动调整表格的内容."
sdxRichEditCommandToggleTableAutoFitContentsMenuCaption="内容自动调整"
sdxRichEditCommandToggleTableAutoFitPlaceholderDescription="基于文字自动调整列宽.\r\\n\r\\n你可以设置表格的宽度，基于窗口的大小或将其转换回使用固定列宽."
sdxRichEditCommandToggleTableAutoFitPlaceholderMenuCaption="自动调整"
sdxRichEditCommandToggleTableAutoFitWindowDescription="到窗口自动调整表格."
sdxRichEditCommandToggleTableAutoFitWindowMenuCaption="窗口自动调整表格"
sdxRichEditCommandToggleTableCellsAllBordersDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsAllBordersMenuCaption="所有边框(&A)"
sdxRichEditCommandToggleTableCellsBottomBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsBottomBorderMenuCaption="下边框(&B)"
sdxRichEditCommandToggleTableCellsBottomCenterAlignmentDescription="文字居中，并靠单元格的底部对齐."
sdxRichEditCommandToggleTableCellsBottomCenterAlignmentMenuCaption="底部居中对齐"
sdxRichEditCommandToggleTableCellsBottomLeftAlignmentDescription="将文本与单元格的左下角对齐."
sdxRichEditCommandToggleTableCellsBottomLeftAlignmentMenuCaption="底部左对齐"
sdxRichEditCommandToggleTableCellsBottomRightAlignmentDescription="将文本与单元格的右下角对齐."
sdxRichEditCommandToggleTableCellsBottomRightAlignmentMenuCaption="底部右对齐"
sdxRichEditCommandToggleTableCellsInsideBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsInsideBorderMenuCaption="内部边界(&I)"
sdxRichEditCommandToggleTableCellsInsideHorizontalBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsInsideHorizontalBorderMenuCaption="内部横框线(&H)"
sdxRichEditCommandToggleTableCellsInsideVerticalBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsInsideVerticalBorderMenuCaption="内部竖框线(&V)"
sdxRichEditCommandToggleTableCellsLeftBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsLeftBorderMenuCaption="左边框(&L)"
sdxRichEditCommandToggleTableCellsMiddleCenterAlignmentDescription="文本在单元格内水平和垂直都居中."
sdxRichEditCommandToggleTableCellsMiddleCenterAlignmentMenuCaption="居中对齐"
sdxRichEditCommandToggleTableCellsMiddleLeftAlignmentDescription="文字垂直居中，并对齐到单元格的左侧."
sdxRichEditCommandToggleTableCellsMiddleLeftAlignmentMenuCaption="居中左对齐"
sdxRichEditCommandToggleTableCellsMiddleRightAlignmentDescription="文字垂直居中，并对齐到单元格的右侧."
sdxRichEditCommandToggleTableCellsMiddleRightAlignmentMenuCaption="居中右对齐"
sdxRichEditCommandToggleTableCellsOutsideBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsOutsideBorderMenuCaption="外部边框(&S)"
sdxRichEditCommandToggleTableCellsRightBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsRightBorderMenuCaption="右边框(&R)"
sdxRichEditCommandToggleTableCellsTopBorderDescription="自定义所选单元格的边框."
sdxRichEditCommandToggleTableCellsTopBorderMenuCaption="上边框(&P)"
sdxRichEditCommandToggleTableCellsTopCenterAlignmentDescription="文字居中，并靠单元格的顶部对齐."
sdxRichEditCommandToggleTableCellsTopCenterAlignmentMenuCaption="顶部居中对齐"
sdxRichEditCommandToggleTableCellsTopLeftAlignmentDescription="将文本与单元格的左上角对齐."
sdxRichEditCommandToggleTableCellsTopLeftAlignmentMenuCaption="顶部左对齐"
sdxRichEditCommandToggleTableCellsTopRightAlignmentDescription="将文本与单元格的右上角对齐."
sdxRichEditCommandToggleTableCellsTopRightAlignmentMenuCaption="靠上右对齐"
sdxRichEditCommandToggleTableFixedColumnWidthDescription="将表大小设置为固定宽度."
sdxRichEditCommandToggleTableFixedColumnWidthMenuCaption="固定列宽"
sdxRichEditCommandToggleTextCaseDescription="切换大小写."
sdxRichEditCommandToggleTextCaseMenuCaption="切换大小写"
sdxRichEditCommandToggleViewMergedDataDescription="你文档中的合并域替换从收件人列表中的实际数据，所以你可以看到它是什么样子."
sdxRichEditCommandToggleViewMergedDataMenuCaption="查看合并数据"
sdxRichEditCommandToggleWhitespaceDescription="显示段落标记和其他隐藏的格式符号."
sdxRichEditCommandToggleWhitespaceMenuCaption="显示/隐藏 ?"
sdxRichEditCommandUndoDescription="撤消上次操作."
sdxRichEditCommandUndoMenuCaption="撤销(&U)"
sdxRichEditCommandUnprotectDocumentDescription="使用户能够编辑该文档."
sdxRichEditCommandUnprotectDocumentMenuCaption="解除文档保护"
sdxRichEditCommandUpdateFieldDescription="更新域"
sdxRichEditCommandUpdateFieldMenuCaption="更新域"
sdxRichEditCommandUpdateFieldsDescription="更新域"
sdxRichEditCommandUpdateFieldsMenuCaption="更新域"
sdxRichEditCommandUpdateTableOfContentsDescription="更新表的内容，使所有条目都指向正确的页码."
sdxRichEditCommandUpdateTableOfContentsMenuCaption="更新表"
sdxRichEditCommandUpdateTableOfFiguresDescription="更新数字表来包含文档中的所有条目."
sdxRichEditCommandUpdateTableOfFiguresMenuCaption="更新表"
sdxRichEditCommandZoomDescription="缩放"
sdxRichEditCommandZoomInDescription="放大以获得文档的特写视图."
sdxRichEditCommandZoomInMenuCaption="放大"
sdxRichEditCommandZoomMenuCaption="缩放"
sdxRichEditCommandZoomOutDescription="缩小以查看更多页以减小的尺寸."
sdxRichEditCommandZoomOutMenuCaption="缩小"
sdxRichEditCustomNumberingListAlignedAt="对齐(&A):"
sdxRichEditCustomNumberingListButtonFont="字体(&F)..."
sdxRichEditCustomNumberingListDisplayFormat="数字格式(&O):"
sdxRichEditCustomNumberingListIndentAt="缩进(&I):"
sdxRichEditCustomNumberingListNumberFormat="数字格式(&O)"
sdxRichEditCustomNumberingListNumberPosition="数字位置(&U)"
sdxRichEditCustomNumberingListNumberStyle="数字样式(&N):"
sdxRichEditCustomNumberingListStartAt="开始(&S):"
sdxRichEditCustomNumberingListTextPosition="文本位置"
sdxRichEditCustomTableOptionsDialogBottomMargin="下(&B):"
sdxRichEditCustomTableOptionsDialogLeftMargin="左(&L):"
sdxRichEditCustomTableOptionsDialogRightMargin="右(&R):"
sdxRichEditCustomTableOptionsDialogTopMargin="上(&T):"
sdxRichEditDeleteTableCellsDialogCellOperationDeleteColumn="删除整列(&C)"
sdxRichEditDeleteTableCellsDialogCellOperationDeleteRow="删除整行(&R)"
sdxRichEditDeleteTableCellsDialogCellOperationShiftLeft="单元格左移(&L)"
sdxRichEditDeleteTableCellsDialogCellOperationShiftUp="单元格上移(&U)"
sdxRichEditDeleteTableCellsDialogForm="删除单元格"
sdxRichEditDialogButtonCancel="取消"
sdxRichEditDialogButtonOK="确定"
sdxRichEditEditStyleDialogButtonFormat="格式(&O)"
sdxRichEditEditStyleDialogCurrentParagraphText="示例文本 "
sdxRichEditEditStyleDialogCurrentStyle="当前样式:"
sdxRichEditEditStyleDialogDecrementIndent="减少缩进量"
sdxRichEditEditStyleDialogDecrementIndentHint="减少缩进量"
sdxRichEditEditStyleDialogEmptyParentStyle="(基础属性)"
sdxRichEditEditStyleDialogFollowingParagraphText="下一段 "
sdxRichEditEditStyleDialogFontDialog="字体..."
sdxRichEditEditStyleDialogForm="修改样式"
sdxRichEditEditStyleDialogFormatting="正在格式化"
sdxRichEditEditStyleDialogIncrementIndent="增加缩进量"
sdxRichEditEditStyleDialogIncrementIndentHint="增加缩进量"
sdxRichEditEditStyleDialogName="名称(&N):"
sdxRichEditEditStyleDialogParagraphDialog="段落..."
sdxRichEditEditStyleDialogPreviousParagraphText="前一段 "
sdxRichEditEditStyleDialogProperties="属性"
sdxRichEditEditStyleDialogSelectedStyle="选择样式"
sdxRichEditEditStyleDialogStyleBasedOn="样式(&B):"
sdxRichEditEditStyleDialogStyleForFollowingParagraph="后续段落样式(&S):"
sdxRichEditEditStyleDialogTabsDialog="制表符..."
sdxRichEditEditStyleDialogToggleFontBold="粗体(&B)"
sdxRichEditEditStyleDialogToggleFontBoldHint="粗体"
sdxRichEditEditStyleDialogToggleFontItalic="斜体(&I)"
sdxRichEditEditStyleDialogToggleFontItalicHint="斜体"
sdxRichEditEditStyleDialogToggleFontUnderline="下划线(&U)"
sdxRichEditEditStyleDialogToggleFontUnderlineHint="下划线"
sdxRichEditEditStyleDialogToggleParagraphAlignmentCenter="中间(&C)"
sdxRichEditEditStyleDialogToggleParagraphAlignmentCenterHint="中间"
sdxRichEditEditStyleDialogToggleParagraphAlignmentJustify="两端对齐(&J)"
sdxRichEditEditStyleDialogToggleParagraphAlignmentJustifyHint="两端对齐"
sdxRichEditEditStyleDialogToggleParagraphAlignmentLeft="文本左对齐(&L)"
sdxRichEditEditStyleDialogToggleParagraphAlignmentLeftHint="左对齐"
sdxRichEditEditStyleDialogToggleParagraphAlignmentRight="文本右对齐(&R)"
sdxRichEditEditStyleDialogToggleParagraphAlignmentRightHint="右对齐"
sdxRichEditExceptionBookmarkCreationFailing="已存在具有相同名称的书签。要替换吗?"
sdxRichEditExceptionCantDeleteDefaultStyle="不能删除默认的样式."
sdxRichEditExceptionCantResetDefaultProperties="可以不重置默认样式设置."
sdxRichEditExceptionClickToFollowHyperlink="单击以跟踪链接"
sdxRichEditExceptionContinueSearchFromBeginningQuestion="你想要从文档的开头开始搜索吗?"
sdxRichEditExceptionContinueSearchFromEndQuestion="你想要从文档末尾开始搜索吗?"
sdxRichEditExceptionContinueSearchInRemainderQuestion="你想要搜索文档的其余部分吗?"
sdxRichEditExceptionCreateHyperlinkError="不能创建超链接。指定范围中的超链接已存在."
sdxRichEditExceptionDeleteTableStyleQuestion="你想要从文档中删除样式 %s?"
sdxRichEditExceptionDocumentPositionDoesntMatchDocument="错误: 指定的文档位置或范围属于其他文档或子文档"
sdxRichEditExceptionDocumentProtectionInvalidPassword="密码不正确!"
sdxRichEditExceptionDocumentProtectionInvalidPasswordConfirmation="确认密码不匹配."
sdxRichEditExceptionDuplicateBookmark="文档中已存在具有该名称的书签"
sdxRichEditExceptionEncryptedFile="不支持加密文件"
sdxRichEditExceptionErrorLinkDeletedStyle="错误: 无法链接已删除的样式"
sdxRichEditExceptionIncorrectBookmarkName="书签名称应以字母开头，只能包含字母数字字符和下划线."
sdxRichEditExceptionIncorrectNumericFieldFormat="错误: 指定的格式无法用数量表示."
sdxRichEditExceptionIncorrectPattern="不正确的模式."
sdxRichEditExceptionInvalidBeginInit="错误: 调用BeginInit里面的BeginUpdate"
sdxRichEditExceptionInvalidBeginUpdate="错误: 调用BeginUpdate里面的BeginInit"
sdxRichEditExceptionInvalidCopyFromDocumentModel="错误: 源和目标文档模型不同"
sdxRichEditExceptionInvalidDivisor="数字必须是%s的除数."
sdxRichEditExceptionInvalidDocumentModel="错误: 文档模型不同"
sdxRichEditExceptionInvalidEndInit="错误: 调用EndInit或CancelInit没有BeginInit或里面的BeginUpdate"
sdxRichEditExceptionInvalidEndUpdate="错误: 调用EndUpdate或CancelUpate没有BeginUpdate或里面的BeginInit"
sdxRichEditExceptionInvalidFontSize="数字必须在%s到%s之间."
sdxRichEditExceptionInvalidImageFile="指定的图像不是有效的."
sdxRichEditExceptionInvalidNavigateUri="此网站的地址不是有效的。请检查地址，然后重试."
sdxRichEditExceptionInvalidNumber="不是一个有效的数字."
sdxRichEditExceptionInvalidNumberingListIndex="NumberingListIndex指向的不是存在的列表."
sdxRichEditExceptionInvalidNumberingListStartAtValue="此格式下"开始"必须在%s到%s之间"
sdxRichEditExceptionInvalidParagraphContainNumbering="错误: 段落已经包含编号"
sdxRichEditExceptionInvalidParentStyle="错误: 无效的父样式分配造成循环引用"
sdxRichEditExceptionInvalidSetCharacterProperties="错误: 不能设置属性，没有BeginInit或没有添加对象到文档"
sdxRichEditExceptionInvalidSetParagraphProperties="错误: 不能设置属性，没有BeginInit或没有添加对象到文档"
sdxRichEditExceptionInvalidStyleName="无效的样式名称"
sdxRichEditExceptionInvalidTabStop="这不是一个有效的制表符."
sdxRichEditExceptionInvalidValueRange="值必须在%s到%s之间."
sdxRichEditExceptionIsNotValid=""%s"不是有效的"%s"的值"
sdxRichEditExceptionLeftRightSectionMarginsTooLarge="左/右页边距是太大，在一些段的页面高度."
sdxRichEditExceptionMagicNumberNotFound="您试图打开的文件的格式与文件扩展名的格式不同."
sdxRichEditExceptionMissingOperator="!缺少运算符."
sdxRichEditExceptionNoDefaultTabs="无法设置默认制表位."
sdxRichEditExceptionNoTocEntriesFound="找到没有表的目录条目."
sdxRichEditExceptionNumberingListNotInListCollection="不能使用编号的列表。编号列表中必须添加到 Document.NumberingLists 集合"
sdxRichEditExceptionParagraphStyleNameAlreadyExists="此样式名称已经存在."
sdxRichEditExceptionReplacementsCount="%s 替换了."
sdxRichEditExceptionSearchComplete="搜索已完成."
sdxRichEditExceptionSearchInBackwardDirectionComplete="已达到文档的开头."
sdxRichEditExceptionSearchInForwardDirectionComplete="已达到文档的末尾."
sdxRichEditExceptionSearchInSelectionComplete="所选内容中的搜索完毕."
sdxRichEditExceptionSearchItemNotFound="未找到搜索项目."
sdxRichEditExceptionSelectBookmarkError="不能选择非活动子文档的书签."
sdxRichEditExceptionStyleAlreadyLinked="错误: 样式已经包含链接的样式"
sdxRichEditExceptionSyntaxErrorInFieldPattern="语法错误, %s."
sdxRichEditExceptionTableIntegrityError="错误: 表格不完整"
sdxRichEditExceptionThrowInternalException="发生了一个内部错误"
sdxRichEditExceptionTopBottomSectionMarginsTooLarge="顶部/底部边距都太大，在一些段的页面高度."
sdxRichEditExceptionUnexpectedEndOfFormula="!意外的公式结尾."
sdxRichEditExceptionUnknownSwitchArgument="错误!未知的开关参数."
sdxRichEditExceptionUnmatchedQuotesInFieldPattern="错误: 模式字符串包含不匹配的引号."
sdxRichEditExceptionUnsupportedDocVersion="仅支持MS Word 97和之后的版本"
sdxRichEditExceptionUnsupportedFormatException="文件格式不受支持"
sdxRichEditExceptionUseDeletedBookmarkError="错误: 使用已删除的书签"
sdxRichEditExceptionUseDeletedFieldError="错误: 使用域段"
sdxRichEditExceptionUseDeletedHyperlinkError="错误: 使用已删除超链接"
sdxRichEditExceptionUseDeletedParagraphError="错误: 使用已删除的段落"
sdxRichEditExceptionUseDeletedSectionError="错误: 使用已删除的节"
sdxRichEditExceptionUseDeletedStyleError="错误: 使用已删除的样式"
sdxRichEditExceptionUseDeletedTableCellError="错误: 使用已删除的表格单元格"
sdxRichEditExceptionUseDeletedTableError="错误: 使用已删除的表"
sdxRichEditExceptionUseDeletedTableRowError="错误: 使用已删除的表行"
sdxRichEditExceptionUsedWrongUnit="未正确指定的度量单位."
sdxRichEditExceptionUseInvalidCharacterProperties="错误: 字符属性不再有效"
sdxRichEditExceptionUseInvalidDocument="错误: 此文档已不再有效"
sdxRichEditExceptionUseInvalidParagraphProperties="错误: 段落属性不再有效"
sdxRichEditExceptionVariableDeletedOrMissed="错误: 文档变量是丢失或已删除(从变量集合)"
sdxRichEditExceptionZeroDivide="!除数为0."
sdxRichEditFileFilterDescription_AllFiles="所有文件"
sdxRichEditFileFilterDescription_BitmapFiles="Windows位图"
sdxRichEditFileFilterDescription_EmfFiles="微软增强型图元文件"
sdxRichEditFileFilterDescription_GifFiles="图形交换格式"
sdxRichEditFileFilterDescription_JPEGFiles="JPEG文件交换格式"
sdxRichEditFileFilterDescription_OpenXmlFiles="Word 2007文档"
sdxRichEditFileFilterDescription_PNGFiles="可移植网络图形"
sdxRichEditFileFilterDescription_RtfFiles="富文本格式"
sdxRichEditFileFilterDescription_TextFiles="文本文件"
sdxRichEditFileFilterDescription_TiffFiles="标记图像文件格式"
sdxRichEditFileFilterDescription_WmfFiles="Windows元文件"
sdxRichEditFontDialogAllCaps="全部大写(&A)"
sdxRichEditFontDialogButtonColorAuto="自动"
sdxRichEditFontDialogDoubleStrikeout="双删除线(&G)"
sdxRichEditFontDialogEffects="效果"
sdxRichEditFontDialogFontColor="字体颜色:"
sdxRichEditFontDialogFontName="字体:"
sdxRichEditFontDialogFontNotInstalled=""
sdxRichEditFontDialogFontSize="尺寸:"
sdxRichEditFontDialogFontStyle="字体样式:"
sdxRichEditFontDialogFontStyleBold="粗体"
sdxRichEditFontDialogFontStyleBoldItalic="加粗倾斜"
sdxRichEditFontDialogFontStyleItalic="斜体"
sdxRichEditFontDialogFontStyleRegular="常规"
sdxRichEditFontDialogForm="字体"
sdxRichEditFontDialogHidden="隐藏(&H)"
sdxRichEditFontDialogPreview="预览"
sdxRichEditFontDialogStrikeout="删除线(&K)"
sdxRichEditFontDialogSubscript="下标(&B)"
sdxRichEditFontDialogSuperscript="上标(&P)"
sdxRichEditFontDialogUnderlineColor="下划线颜色:"
sdxRichEditFontDialogUnderlineStyle="下划线样式:"
sdxRichEditFontDialogUnderlineStyleDouble="双"
sdxRichEditFontDialogUnderlineStyleNone="(无)"
sdxRichEditFontDialogUnderlineStyleSingle="单一"
sdxRichEditFontDialogUnderlineWordsOnly="只有词下划线(&U)"
sdxRichEditHyperlnkDialogAddress="地址:"
sdxRichEditHyperlnkDialogBookmark="书签(&O):"
sdxRichEditHyperlnkDialogForm="超链接"
sdxRichEditHyperlnkDialogLinkTo="链接到:"
sdxRichEditHyperlnkDialogLinkToDocument="文档中的位置"
sdxRichEditHyperlnkDialogLinkToWebPage="已存在的文件或网页"
sdxRichEditHyperlnkDialogSelectionInDocument="在文档中选择"
sdxRichEditHyperlnkDialogTarget="目标框架(&G):"
sdxRichEditHyperlnkDialogTargetFrameDescription_Blank="新窗口"
sdxRichEditHyperlnkDialogTargetFrameDescription_Parent="父框架"
sdxRichEditHyperlnkDialogTargetFrameDescription_Self="同样的框架"
sdxRichEditHyperlnkDialogTargetFrameDescription_Top="整页"
sdxRichEditHyperlnkDialogText="要显示的文本(&T):"
sdxRichEditHyperlnkDialogTooltip="屏幕提示(&P):"
sdxRichEditHyperlnkEditHyperlinkTitle="编辑超链接"
sdxRichEditHyperlnkInsertHyperlinkTitle="插入超连接"
sdxRichEditHyperlnkSelectedBookmarkNone="<无>"
sdxRichEditHyperlnkSelectionInDocument="在文档中选择"
sdxRichEditInsertMergeFieldAddressFieldsSource="地址域(&A)"
sdxRichEditInsertMergeFieldButtonCancel="关闭"
sdxRichEditInsertMergeFieldButtonInsert="插入(&I)"
sdxRichEditInsertMergeFieldDatabaseFieldsSource="数据库域(&D)"
sdxRichEditInsertMergeFieldFields="域:"
sdxRichEditInsertMergeFieldForm="插入合并域"
sdxRichEditInsertMergeFieldInsert="插入:"
sdxRichEditInsertTableCellsDialogCellOperationDeleteColumn="整列插入(&C)"
sdxRichEditInsertTableCellsDialogCellOperationDeleteRow="整行插入(&R)"
sdxRichEditInsertTableCellsDialogCellOperationShiftLeft="单元格右移(&I)"
sdxRichEditInsertTableCellsDialogCellOperationShiftUp="单元格下移(&D)"
sdxRichEditInsertTableCellsDialogForm="插入单元格"
sdxRichEditInsertTableColumns="列数(&C):"
sdxRichEditInsertTableForm="插入表格"
sdxRichEditInsertTableRows="行数(&R):"
sdxRichEditInsertTableTableSize="表格大小"
sdxRichEditInvalidMeasurement="这不是一个有效的尺寸"
sdxRichEditInvalidMeasurementValue="尺寸必须在%s到%s之间."
sdxRichEditInvalidNumber="不是一个有效的数字."
sdxRichEditInvalidSize="数字必须在%d到%d之间."
sdxRichEditLineNumberingDialogAddLineNumbering="添加行号(&L)"
sdxRichEditLineNumberingDialogCountBy="计数(&B):"
sdxRichEditLineNumberingDialogForm="行号"
sdxRichEditLineNumberingDialogFromText="文本(&T):"
sdxRichEditLineNumberingDialogNumbering="编号:"
sdxRichEditLineNumberingDialogNumberingRestartContinuous="连续(&C)"
sdxRichEditLineNumberingDialogNumberingRestartEachPage="重置每一页(&P)"
sdxRichEditLineNumberingDialogNumberingRestartEachSection="重置每一段(&S)"
sdxRichEditLineNumberingDialogStartAt="开始(&A):"
sdxRichEditMergeOptionsDialogForm="合并选项"
sdxRichEditMergeOptionsDialogMergeAllRecords="全部(&A)"
sdxRichEditMergeOptionsDialogMergeRecords="合并记录"
sdxRichEditMergeOptionsDialogMergeSelectedRecords="已选择(&S)"
sdxRichEditMergeOptionsDialogMergeTo="合并到"
sdxRichEditMergeOptionsDialogMergeToFile="文件(&F)"
sdxRichEditMergeOptionsDialogMergeToWindow="窗口(&W)"
sdxRichEditMsg_Loading="正在读取..."
sdxRichEditMsg_Saving="正在保存..."
sdxRichEditMultiLevelNumberingListDialogFollowNumberWith="从数字(&W):"
sdxRichEditMultiLevelNumberingListDialogForm="自定义多级符号列表"
sdxRichEditMultiLevelNumberingListDialogLevel="级别(&V)"
sdxRichEditMultiLevelNumberingListFollowNumberNothing="无"
sdxRichEditMultiLevelNumberingListFollowNumberSpace="空格"
sdxRichEditMultiLevelNumberingListFollowNumberTabCharacter="制表符"
sdxRichEditNumberingListBoxNone="无"
sdxRichEditNumberingListDialogBulleted="项目符号(&B)"
sdxRichEditNumberingListDialogButtonCustomize="自定义..."
sdxRichEditNumberingListDialogForm="项目符号和编号"
sdxRichEditNumberingListDialogNumbered="编号(&N)"
sdxRichEditNumberingListDialogOutlineNumbered="多级符号(&U)"
sdxRichEditPageSetupDialogApplyTo="应用到(&Y):"
sdxRichEditPageSetupDialogDifferentFirstPage="首页不同(&P)"
sdxRichEditPageSetupDialogDifferentOddAndEvenPage="奇偶页不同(&O)"
sdxRichEditPageSetupDialogForm="页面设置"
sdxRichEditPageSetupDialogHeadersAndFooters="页首页尾"
sdxRichEditPageSetupDialogLandscape="横向(&S)"
sdxRichEditPageSetupDialogMarginBottom="下(&B):"
sdxRichEditPageSetupDialogMarginLeft="左(&L):"
sdxRichEditPageSetupDialogMarginRight="右(&R):"
sdxRichEditPageSetupDialogMargins="边距"
sdxRichEditPageSetupDialogMarginTop="上(&T):"
sdxRichEditPageSetupDialogOrientation="方向"
sdxRichEditPageSetupDialogPageLayout="布局"
sdxRichEditPageSetupDialogPageMargins="边距"
sdxRichEditPageSetupDialogPagePaper="纸张"
sdxRichEditPageSetupDialogPaperHeight="高度(&H):"
sdxRichEditPageSetupDialogPaperSize="纸张大小(&R)"
sdxRichEditPageSetupDialogPaperWidth="宽度(&W):"
sdxRichEditPageSetupDialogPortrait="纵向(&P)"
sdxRichEditPageSetupDialogSection="分段"
sdxRichEditPageSetupDialogSectionStart="段落开始(&R):"
sdxRichEditPageSetupSectionStartColumn="新列"
sdxRichEditPageSetupSectionStartContinuous="连续"
sdxRichEditPageSetupSectionStartEvenPage="偶数页"
sdxRichEditPageSetupSectionStartNextPage="新建页"
sdxRichEditPageSetupSectionStartOddPage="奇数页"
sdxRichEditPaperKindA2="A2"
sdxRichEditPaperKindA3="A3"
sdxRichEditPaperKindA3Extra="特大A3"
sdxRichEditPaperKindA3ExtraTransverse="横向特大A3"
sdxRichEditPaperKindA3Rotated="A3 旋转"
sdxRichEditPaperKindA3Transverse="横向A3"
sdxRichEditPaperKindA4="A4"
sdxRichEditPaperKindA4Extra="特大A4"
sdxRichEditPaperKindA4Plus="A4 Plus"
sdxRichEditPaperKindA4Rotated="A4 旋转"
sdxRichEditPaperKindA4Small="小A4"
sdxRichEditPaperKindA4Transverse="横向A4"
sdxRichEditPaperKindA5="A5"
sdxRichEditPaperKindA5Extra="特大A5"
sdxRichEditPaperKindA5Rotated="A5 旋转"
sdxRichEditPaperKindA5Transverse="横向A5"
sdxRichEditPaperKindA6="A6"
sdxRichEditPaperKindA6Rotated="A6 旋转"
sdxRichEditPaperKindAPlus="SuperA/SuperA/A4"
sdxRichEditPaperKindB4="B4"
sdxRichEditPaperKindB4Envelope="B4 Envelope"
sdxRichEditPaperKindB4JisRotated="JIS B4 Rotated"
sdxRichEditPaperKindB5="B5"
sdxRichEditPaperKindB5Envelope="B5 Envelope"
sdxRichEditPaperKindB5Extra="ISO B5 Extra"
sdxRichEditPaperKindB5JisRotated="JIS B5 Rotated"
sdxRichEditPaperKindB5Transverse="JIS B5 Transverse"
sdxRichEditPaperKindB6Envelope="B6 Envelope"
sdxRichEditPaperKindB6Jis="JIS B6"
sdxRichEditPaperKindB6JisRotated="JIS B6 Rotated"
sdxRichEditPaperKindBPlus="SuperB/SuperB/A3"
sdxRichEditPaperKindC3Envelope="C3 Envelope"
sdxRichEditPaperKindC4Envelope="C4 Envelope"
sdxRichEditPaperKindC5Envelope="C5 Envelope"
sdxRichEditPaperKindC65Envelope="C65 Envelope"
sdxRichEditPaperKindC6Envelope="C6 Envelope"
sdxRichEditPaperKindCSheet="C纸张"
sdxRichEditPaperKindCustom="自定义"
sdxRichEditPaperKindDLEnvelope="DL Envelope"
sdxRichEditPaperKindExecutive="行政纸张"
sdxRichEditPaperKindFolio="对开"
sdxRichEditPaperKindGermanLegalFanfold="德国正规复写簿"
sdxRichEditPaperKindJapaneseDoublePostcard="日本双明信片"
sdxRichEditPaperKindJapanesePostcard="日本明信片"
sdxRichEditPaperKindJapanesePostcardRotated="日本明信片"
sdxRichEditPaperKindLedger="帐簿"
sdxRichEditPaperKindLegal="法定"
sdxRichEditPaperKindLegalExtra="特大信纸"
sdxRichEditPaperKindLetter="信封"
sdxRichEditPaperKindLetterExtraTransverse="横向特大信封"
sdxRichEditPaperKindLetterPlus="Letter Plus"
sdxRichEditPaperKindLetterRotated="信封 旋转"
sdxRichEditPaperKindLetterSmall="小信封"
sdxRichEditPaperKindLetterTransverse="横向信封"
sdxRichEditPaperKindMonarchEnvelope="Monarch Envelope"
sdxRichEditPaperKindNote="记事本"
sdxRichEditPaperKindNumber10Envelope="Number 10 Envelope"
sdxRichEditPaperKindNumber11Envelope="Number 11 Envelope"
sdxRichEditPaperKindNumber12Envelope="Number 12 Envelope"
sdxRichEditPaperKindNumber14Envelope="Number 14 Envelope"
sdxRichEditPaperKindNumber9Envelope="Number 9 Envelope"
sdxRichEditPaperKindPersonalEnvelope="Personal Envelope (6 3/4)"
sdxRichEditPaperKindPrc16K="16开"
sdxRichEditPaperKindPrc16KRotated="中国16开 旋转"
sdxRichEditPaperKindPrc32K="32开"
sdxRichEditPaperKindPrc32KBig="Prc 32K Big"
sdxRichEditPaperKindPrc32KBigRotated="Prc 32K Big Rotated"
sdxRichEditPaperKindPrc32KRotated="中国32开 旋转"
sdxRichEditPaperKindPrcEnvelopeNumber1="Prc Envelope Number 1"
sdxRichEditPaperKindPrcEnvelopeNumber10="Prc Envelope Number 10"
sdxRichEditPaperKindPrcEnvelopeNumber10Rotated="Prc Envelope Number 10 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber1Rotated="Prc Envelope Number 1 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber2="Prc Envelope Number 2"
sdxRichEditPaperKindPrcEnvelopeNumber2Rotated="Prc Envelope Number 2 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber3="Prc Envelope Number 3"
sdxRichEditPaperKindPrcEnvelopeNumber3Rotated="Prc Envelope Number 3 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber4="Prc Envelope Number 4"
sdxRichEditPaperKindPrcEnvelopeNumber4Rotated="Prc Envelope Number 4 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber5="Prc Envelope Number 5"
sdxRichEditPaperKindPrcEnvelopeNumber5Rotated="Prc Envelope Number 5 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber6="Prc Envelope Number 6"
sdxRichEditPaperKindPrcEnvelopeNumber6Rotated="Prc Envelope Number 6 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber7="Prc Envelope Number 7"
sdxRichEditPaperKindPrcEnvelopeNumber7Rotated="Prc Envelope Number 7 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber8="Prc Envelope Number 8"
sdxRichEditPaperKindPrcEnvelopeNumber8Rotated="Prc Envelope Number 8 Rotated"
sdxRichEditPaperKindPrcEnvelopeNumber9="Prc Envelope Number 9"
sdxRichEditPaperKindPrcEnvelopeNumber9Rotated="Prc Envelope Number 9 Rotated"
sdxRichEditPaperKindQuarto="四开"
sdxRichEditPaperKindStandard10x11="Standard 10x11"
sdxRichEditPaperKindStandard10x14="Standard 10x14"
sdxRichEditPaperKindStandard11x17="Standard 11x17"
sdxRichEditPaperKindStandard12x11="Standard 12x11"
sdxRichEditPaperKindStandard15x11="Standard 15x11"
sdxRichEditPaperKindStandard9x11="Standard 9x11"
sdxRichEditPaperKindStatement="清单"
sdxRichEditPaperKindTabloid="文摘"
sdxRichEditPaperKindTabloidExtra="Tabloid Extra"
sdxRichEditPaperKindUSStandardFanfold="US Standard Fanfold"
sdxRichEditParagraphDialogAfter="之后(&E):"
sdxRichEditParagraphDialogAlignment="对齐(&G):"
sdxRichEditParagraphDialogAt="在(&A):"
sdxRichEditParagraphDialogBefore="之前(&B):"
sdxRichEditParagraphDialogButtonTabs="制表符(&T)..."
sdxRichEditParagraphDialogBy="通过(&Y):"
sdxRichEditParagraphDialogDontAddSpace="在相同样式的段落间不添加空格(&C)"
sdxRichEditParagraphDialogForm="段落"
sdxRichEditParagraphDialogGeneral="常规"
sdxRichEditParagraphDialogIndentation="缩进"
sdxRichEditParagraphDialogIndentsAndSpacing="缩进和间距(&I)"
sdxRichEditParagraphDialogKeepLinesTogether="将行放在一起(&K)"
sdxRichEditParagraphDialogLeft="左(&L):"
sdxRichEditParagraphDialogLineAndPageBreaks="换行和分页(&P)"
sdxRichEditParagraphDialogLineSpacing="行间距(&N):"
sdxRichEditParagraphDialogOutlinelevel="大纲级别(&O):"
sdxRichEditParagraphDialogPageBreakBefore="段前分页(&B)"
sdxRichEditParagraphDialogPagination="分页"
sdxRichEditParagraphDialogRight="右(&R):"
sdxRichEditParagraphDialogSpacing="间距"
sdxRichEditParagraphDialogSpecial="特殊(&S):"
sdxRichEditSearchTextDialogAnyOneCharacterInTheSet="集合中的任何一个字符"
sdxRichEditSearchTextDialogAnyOneCharacterNotInTheSet="不在集合中的任何一个字符"
sdxRichEditSearchTextDialogAnySingleCharacter="任何单个字符"
sdxRichEditSearchTextDialogBeginningOfLine="段落的开头"
sdxRichEditSearchTextDialogBeginningOfWord="单词开头"
sdxRichEditSearchTextDialogButtonFindNext="查找下一个(&F)"
sdxRichEditSearchTextDialogButtonReplaceAll="全部替换(&A)"
sdxRichEditSearchTextDialogButtonReplaceNext="替换(&R)"
sdxRichEditSearchTextDialogDirection="搜索(&:):"
sdxRichEditSearchTextDialogDirectionAll="全部"
sdxRichEditSearchTextDialogDirectionDown="下"
sdxRichEditSearchTextDialogDirectionUp="上"
sdxRichEditSearchTextDialogEndOfLine="段末"
sdxRichEditSearchTextDialogEndOfWord="单词结尾"
sdxRichEditSearchTextDialogEscapeSpecialCharacter="转义特殊字符"
sdxRichEditSearchTextDialogFind="查找(&D)"
sdxRichEditSearchTextDialogFindWholeWord="全字匹配(&Y)"
sdxRichEditSearchTextDialogForm="查找与替换"
sdxRichEditSearchTextDialogInteger="整数"
sdxRichEditSearchTextDialogMatchCase="匹配大小写(&H)"
sdxRichEditSearchTextDialogOneOrMore="一个或更多"
sdxRichEditSearchTextDialogOr="或者"
sdxRichEditSearchTextDialogRegex="正则表达式(&G)"
sdxRichEditSearchTextDialogReplace="替换(&P)"
sdxRichEditSearchTextDialogRplReplaceString="替换为(&I):"
sdxRichEditSearchTextDialogSearchString="查找(&N):"
sdxRichEditSearchTextDialogSpaceOrTab="空格或制表符"
sdxRichEditSearchTextDialogTagExpression="标记表达式"
sdxRichEditSearchTextDialogTaggedExpression="带标记的表达式"
sdxRichEditSearchTextDialogWordCharacter="单词字符"
sdxRichEditSearchTextDialogZeroOrMore="零个或更多"
sdxRichEditSimpleNumberingListDialogForm="自定义编号列表"
sdxRichEditSplitTableCellsDialogForm="拆分单元格"
sdxRichEditSplitTableCellsDialogMergeBeforeSplit="合并单元格前拆分"
sdxRichEditSplitTableCellsDialogNumberOfColumns="列数(&C):"
sdxRichEditSplitTableCellsDialogNumberOfRows="行数(&R):"
sdxRichEditSymbolDialogCharacterCode="字符代码(&C):"
sdxRichEditSymbolDialogFont="字体(&F):"
sdxRichEditSymbolDialogForm="符号"
sdxRichEditTabForm_All="全部"
sdxRichEditTableCellOptionsDialogFitText="适应文字(&F)"
sdxRichEditTableCellOptionsDialogForm="单元格选项"
sdxRichEditTableCellOptionsDialogMargins="单元格合并"
sdxRichEditTableCellOptionsDialogOptions="选项"
sdxRichEditTableCellOptionsDialogSameAsWholeTable="整个表相同(&S)"
sdxRichEditTableCellOptionsDialogWrapText="文本换行(&W)"
sdxRichEditTableOptionsDialogAllowCellSpacing="允许的单元格之间的间距(&S)"
sdxRichEditTableOptionsDialogDefaultCellSpacing="默认单元格间距"
sdxRichEditTableOptionsDialogForm="表格选项"
sdxRichEditTableOptionsDialogMargins="默认单元格边距"
sdxRichEditTableOptionsDialogOptions="选项"
sdxRichEditTableOptionsDialogResizeToFitContent="自动调整大小以适应内容(&Z)"
sdxRichEditTablePropertiesDialogButtonBorder="边框和阴影..."
sdxRichEditTablePropertiesDialogButtonCellOptions="选项(&O)..."
sdxRichEditTablePropertiesDialogButtonNextColumn="下一列(&N)"
sdxRichEditTablePropertiesDialogButtonNextRow="下一行(&N)"
sdxRichEditTablePropertiesDialogButtonPreviousColumn="上一列(&P)"
sdxRichEditTablePropertiesDialogButtonPreviousRow="上一行(&P)"
sdxRichEditTablePropertiesDialogButtonTableOptions="选项(&O)..."
sdxRichEditTablePropertiesDialogCantSplit="允许跨页断行(&K)"
sdxRichEditTablePropertiesDialogCell="单元格(&E)"
sdxRichEditTablePropertiesDialogCellVerticalAlighment="垂直对齐方式"
sdxRichEditTablePropertiesDialogCellVerticalAlignmentBottom="下(&B)"
sdxRichEditTablePropertiesDialogCellVerticalAlignmentCenter="中间(&C)"
sdxRichEditTablePropertiesDialogCellVerticalAlignmentTop="上(&P)"
sdxRichEditTablePropertiesDialogColumn="列(&U)"
sdxRichEditTablePropertiesDialogColumnNumber="列"
sdxRichEditTablePropertiesDialogForm="表格属性"
sdxRichEditTablePropertiesDialogHeader="作为标题行在每页的顶端重复(&H)"
sdxRichEditTablePropertiesDialogIndentFromLeft="左缩进(&I):"
sdxRichEditTablePropertiesDialogPreferredWidth="首选宽度(&W):"
sdxRichEditTablePropertiesDialogRow="行(&R)"
sdxRichEditTablePropertiesDialogRowHeightType="行高(&I):"
sdxRichEditTablePropertiesDialogRowNumber="行"
sdxRichEditTablePropertiesDialogRowOptions="选项(&O)"
sdxRichEditTablePropertiesDialogSize="尺寸"
sdxRichEditTablePropertiesDialogSpecifyHeight="指定高度(&S):"
sdxRichEditTablePropertiesDialogTable="表格(&T)"
sdxRichEditTablePropertiesDialogTableAlignmenCenter="中间(&C)"
sdxRichEditTablePropertiesDialogTableAlignmenRight="右(&H)"
sdxRichEditTablePropertiesDialogTableAlignment="对齐"
sdxRichEditTablePropertiesDialogTableAlignmentLeft="左(&L)"
sdxRichEditTablePropertiesDialogWidthType="度量单位(&M):"
sdxRichEditTablePropertiesHeightTypeExact="精确"
sdxRichEditTablePropertiesHeightTypeMinimum="至少"
sdxRichEditTabsDialogAlignment="对齐"
sdxRichEditTabsDialogButtonClear="清除(&E)"
sdxRichEditTabsDialogButtonClearAll="全部清除(&A)"
sdxRichEditTabsDialogButtonSet="设置(&S)"
sdxRichEditTabsDialogCenter="中间(&C)"
sdxRichEditTabsDialogDecimal="十进制(&D)"
sdxRichEditTabsDialogDefaultTabStops="默认制表符长度(&F):"
sdxRichEditTabsDialogDots="点(&O)"
sdxRichEditTabsDialogEqualSign="等号(&Q)"
sdxRichEditTabsDialogForm="制表符"
sdxRichEditTabsDialogHyphens="连接符(&H)"
sdxRichEditTabsDialogLeader="首领"
sdxRichEditTabsDialogLeft="左(&L)"
sdxRichEditTabsDialogMiddleDots="中间点(&M)"
sdxRichEditTabsDialogNone="(无)(&N)"
sdxRichEditTabsDialogRight="右(&R)"
sdxRichEditTabsDialogTabStopPosition="制表符位置(&T):"
sdxRichEditTabsDialogTabStopsToBeCleared="被清除的制表符:"
sdxRichEditTabsDialogThickLine="粗实线(&I)"
sdxRichEditTabsDialogUnderline="下划线(&U)"
sdxRichEditUnitsCentimeters=" cm"
sdxRichEditUnitsInches="""
sdxRichEditUnitsMillimeters=" mm"
sdxRichEditUnitsPercent="%"
sdxRichEditUnitsPicas=" pi"
sdxRight="右边(&G):"
sdxRightMargin="右边界"
sdxRiseActiveToTop="活动层级显示在顶部"
sdxRoot="根(&R)"
sdxRootBorders="根边框(&B)"
sdxRoundRect="圆角矩形"
sdxRoundSquare="圆角正方形"
sdxRowAutoHeight="自动计算行高(&W)"
sdxRowFields="行字段(&R)"
sdxRowHeadersOnEveryPage="行标题"
sdxRows="行数(&R)"
sdxSalesAndMarketing="销售和\r\\n市场营销"
sdxSample="示例:"
sdxSampleText="示例 Sample Text"
sdxSave="保存(&S)..."
sdxSaveReportDataToFileTitle="另存报表"
sdxScaling="比例(&S)"
sdxSchedulerContent="内容"
sdxSchedulerDateNavigatorContent="DateNavigator 内容"
sdxSchedulerDateNavigatorHeader="DateNavigator 标题"
sdxSchedulerDayHeader="日标题"
sdxSchedulerEvent="事件"
sdxSchedulerNotesAreaBlank="备注区域（空白）"
sdxSchedulerNotesAreaLined="备注区域（分行）"
sdxSchedulerResourceHeader="资源标题"
sdxSchedulerSchedulerHeader="调度计划标题"
sdxSchedulerTaskPad="任务板"
sdxSchedulerTimeRuler="时间标尺"
sdxSecondaryTimeZone="次要"
sdxSectionPropertiesApplyToCurrentSection="当前节"
sdxSectionPropertiesApplyToSelectedSections="已选节"
sdxSectionPropertiesApplyToWholeDocument="整个文档"
sdxSeeAboveMessage="请参见上面"
sdxSelectAll="全选(&S)"
sdxSelection="选择"
sdxSelectionStyle="选择"
sdxSelectNewRoot="选择报表保存的根路径"
sdxSeparators="分隔"
sdxSeptember="九月"
sdxSeptemberShort="九月"
sdxShading=" 阴影 "
sdxShadow="阴影"
sdxShiftCellsDown="活动单元格下移(&D)"
sdxShiftCellsLeft="活动单元格左移(&L)"
sdxShiftCellsRight="活动单元格右移(&I)"
sdxShiftCellsUp="活动单元格上移(&U)"
sdxShiftColumn="整列(&C)"
sdxShiftRow="整行( &R)"
sdxShortcutMenusBar="快捷菜单"
sdxShow="显示"
sdxShowGridLines="网格行"
sdxShowRowAndColumnHeadings="行和列标题(&R)"
sdxShowTimeAsFreeMessage="释放"
sdxShowTimeAsLabelCaption="时间显示为:"
sdxShowTimeAsOutOfOfficeMessage="外出"
sdxShowTimeAsTentativeMessage="暂定"
sdxShrinkHeight="收缩高度"
sdxShrinkWidth="收缩宽度"
sdxSize="尺寸"
sdxSizes="大小"
sdxSkinElementNotFound="成员"%s"没找到"
sdxSkinGroupNotFound="组"%s"没找到"
sdxSkinInvalidStreamFormat="流格式无效"
sdxSkinParentNotFound="父皮肤"%s"没找到"
sdxSkinsRootFolder="My DX_VCL Skins"
sdxSkipEmptyGroups="跳过空分组"
sdxSkipEmptyViews="跳过空视图"
sdxSlantedDashDotEdgePattern="斜短画线-点"
sdxSoft3D="软三维(&T)"
sdxSoftwareDepartment="软件部门"
sdxSolidEdgePattern="实线"
sdxSolidFillPattern="实线"
sdxSouth="南方"
sdxSpacing="间隔"
sdxSparklineNoData="<无数据>"
sdxSpellCheckerActive="激活(&A)"
sdxSpellCheckerAddButton="添加(&A)"
sdxSpellCheckerApplylButton="应用(&A)"
sdxSpellCheckerAutoCorrect="自动更正"
sdxSpellCheckerAutoCorrectAutomaticallyUseSuggestions="自动使用拼写检查器提供的建议"
sdxSpellCheckerAutoCorrectCapitalize="大写"
sdxSpellCheckerAutoCorrectCorrectCapsLock="校正意外 CAPS LOCK 键用法(&L)"
sdxSpellCheckerAutoCorrectCorrectInitialCaps="校正连续两个大写字母(&I)"
sdxSpellCheckerAutoCorrectCorrectSentenceCaps="句首字母大写(&S)"
sdxSpellCheckerAutoCorrectDisableCapsLock="禁用Caps Lock键"
sdxSpellCheckerAutoCorrectExceptionsFormCaption="异常"
sdxSpellCheckerAutoCorrectOptionsFormCaption="自动更正选项"
sdxSpellCheckerAutoCorrectReplace="替换(&R):"
sdxSpellCheckerAutoCorrectReplacementExistMessageFormat="自动校正条目 %s 已存在。是否要重新定义它？"
sdxSpellCheckerAutoCorrectReplaceTextAsYouType="替换文本"
sdxSpellCheckerAutoCorrectWith="和(&W):"
sdxSpellCheckerAutoInclude="自动包含(&U)"
sdxSpellCheckerCancelButton="取消"
sdxSpellCheckerChangeAllButton="改变所有(&L)"
sdxSpellCheckerChangeButton="改变(&C)"
sdxSpellCheckerChangeTo="改变为(&T):"
sdxSpellCheckerCloseButton="关闭"
sdxSpellCheckerConfirmUseUnknownWord="您已选择在主要的或自定义词典中找不到的单词。您要使用这个词并继续检查吗？""
sdxSpellCheckerCustomDictionaryFormCaption="自定义词典"
sdxSpellCheckerDeleteAllButton="全部删除(&L)"
sdxSpellCheckerDeleteButton="删除(&D)"
sdxSpellCheckerEditButton="编辑..."
sdxSpellCheckerExceptionsButton="异常(&E)"
sdxSpellCheckerFileFormatMismatch="文件格式不匹配"
sdxSpellCheckerFirstLetterExceptions="缩写 (没有后续的大写)"
sdxSpellCheckerHunspellDictionary="拼写检查"
sdxSpellCheckerIgnoreAllButton="全部忽略(&G)"
sdxSpellCheckerIgnoreButton="忽略(&I)"
sdxSpellCheckerIgnoreEmails="忽略电子邮件"
sdxSpellCheckerIgnoreMixedCaseWords="忽略的单词 MiXeDcASe"
sdxSpellCheckerIgnoreRepeatedWords="忽略重复的单词"
sdxSpellCheckerIgnoreUpperCaseWords="忽略大写的单词"
sdxSpellCheckerIgnoreUrls="忽略网站"
sdxSpellCheckerIgnoreWordsWithNumbers="忽略带数字的单词"
sdxSpellCheckerInitialCapsExceptions="具有两个字母连续大写的单词"
sdxSpellCheckerISpellDictionary="ISpell"
sdxSpellCheckerMoreThanOne="一个执行程序中只能运行一个TdxSpellChecker"
sdxSpellCheckerNoActiveDictionaries="词典不可用"
sdxSpellCheckerNoSuggestions="(不建议)"
sdxSpellCheckerNotInDictionary="不在字典里:"
sdxSpellCheckerNotUseChangeAll="更改所有选项不可用的,\r\\n因为您已修改文本而不是真正的拼写错误,选择修改这句话，或撤消修改恢复原来的句子""
sdxSpellCheckerOkButton="确定(&O)"
sdxSpellCheckerOpenOfficeDictionary="OpenOffice"
sdxSpellCheckerOptionsButton="选项(&O)..."
sdxSpellCheckerRepeatedWord="重复的单词:"
sdxSpellCheckerReplaceButton="替换(&A)"
sdxSpellCheckerSelectionCheckIsFinished="选择检查完毕。是否要继续检查文档的其余部分？"
sdxSpellCheckerSpellingComplete="拼写检查结束。"
sdxSpellCheckerSpellingFormCaption="拼写检查"
sdxSpellCheckerSpellingLanguage="语言:"
sdxSpellCheckerSpellingOptionsEditCustomDictionaryGroupBox="编辑自定义词典"
sdxSpellCheckerSpellingOptionsEditCustomDictionaryText="从自定义词典中添加、修改或删除单词。"
sdxSpellCheckerSpellingOptionsFormCaption="拼写选项"
sdxSpellCheckerSpellingOptionsGeneralOptionsGroupBox="常规选项"
sdxSpellCheckerSpellingOptionsInternationalDictionariesGroupBox="国际字典"
sdxSpellCheckerSpellingOptionsInternationalDictionariesText="选择检查拼写时要使用的词典。"
sdxSpellCheckerSpellingOptionsMainGroupBox="拼写检查"
sdxSpellCheckerSuggestButton="建议(&S)"
sdxSpellCheckerSuggestions="建议(&N):"
sdxSpellCheckerUndoButton="撤销(&U)"
sdxSpellCheckerUndoEditButton="撤消编辑(&U)"
sdxSpellCheckerUndoLastButton="撤消上次操作(&U)"
sdxSpellCheckerUserDictionary="用户"
sdxSpreadSheetActionAutoFitColumnWidthCaption="自动适合行宽"
sdxSpreadSheetActionAutoFitColumnWidthHint="自动适合行宽"
sdxSpreadSheetActionAutoFitRowHeightCaption="自动适合行高"
sdxSpreadSheetActionAutoFitRowHeightHint="自动适合行高"
sdxSpreadSheetActionBordersBottomCaption="下框线"
sdxSpreadSheetActionBordersBottomDoubleCaption="双下框线"
sdxSpreadSheetActionBordersBottomDoubleHint="双下框线"
sdxSpreadSheetActionBordersBottomHint="下框线"
sdxSpreadSheetActionChangeFillColorCaption="填充颜色"
sdxSpreadSheetActionChangeFillColorHint="填充颜色"
sdxSpreadSheetActionChangeFontColorCaption="字体颜色"
sdxSpreadSheetActionChangeFontColorHint="字体颜色"
sdxSpreadSheetActionChangeFontNameCaption="字体"
sdxSpreadSheetActionChangeFontNameHint="字体"
sdxSpreadSheetActionChangeFontSizeCaption="大小"
sdxSpreadSheetActionChangeFontSizeHint="大小"
sdxSpreadSheetActionClearAllCaption="全部清除"
sdxSpreadSheetActionClearAllHint="全部清除"
sdxSpreadSheetActionClearContentsCaption="清除内容"
sdxSpreadSheetActionClearContentsHint="清除内容"
sdxSpreadSheetActionClearFormatsCaption="清除格式"
sdxSpreadSheetActionClearFormatsHint="清除格式"
sdxSpreadSheetActionCopySelectionCaption="复制"
sdxSpreadSheetActionCopySelectionHint="复制"
sdxSpreadSheetActionCutSelectionCaption="剪贴"
sdxSpreadSheetActionCutSelectionHint="剪贴"
sdxSpreadSheetActionDeleteColumnsCaption="删除列"
sdxSpreadSheetActionDeleteColumnsHint="删除列"
sdxSpreadSheetActionDeleteCommentsCaption="删除注释"
sdxSpreadSheetActionDeleteCommentsHint="删除注释"
sdxSpreadSheetActionDeleteRowsCaption="删除行"
sdxSpreadSheetActionDeleteRowsHint="删除行"
sdxSpreadSheetActionDeleteSheetCaption="删除页"
sdxSpreadSheetActionDeleteSheetHint="删除页"
sdxSpreadSheetActionFreezeFirstColumnCaption="冻结首列"
sdxSpreadSheetActionFreezeFirstColumnHint="冻结首列"
sdxSpreadSheetActionFreezePanesCaption="冻结窗格"
sdxSpreadSheetActionFreezePanesHint="冻结窗格"
sdxSpreadSheetActionFreezeTopRowCaption="冻结道行"
sdxSpreadSheetActionFreezeTopRowHint="冻结道行"
sdxSpreadSheetActionGroupColumnsCaption="创建列分组"
sdxSpreadSheetActionGroupColumnsHint="创建列分组"
sdxSpreadSheetActionGroupRowsCaption="创建行分组"
sdxSpreadSheetActionGroupRowsHint="创建行分组"
sdxSpreadSheetActionHideColumnsCaption="隐藏列"
sdxSpreadSheetActionHideColumnsHint="隐藏列"
sdxSpreadSheetActionHideRowsCaption="隐藏行"
sdxSpreadSheetActionHideRowsHint="隐藏行"
sdxSpreadSheetActionHideSheetCaption="隐藏页"
sdxSpreadSheetActionHideSheetHint="隐藏页"
sdxSpreadSheetActionIncreaseFontSizeCaption="增加字体大小"
sdxSpreadSheetActionIncreaseFontSizeHint="增加字体大小"
sdxSpreadSheetActionInsertColumnsCaption="插入列"
sdxSpreadSheetActionInsertColumnsHint="插入列"
sdxSpreadSheetActionInsertPictureCaption="图片"
sdxSpreadSheetActionInsertPictureHint="图片"
sdxSpreadSheetActionInsertRowsCaption="插入行"
sdxSpreadSheetActionInsertRowsHint="插入行"
sdxSpreadSheetActionInsertSheetCaption="插入页"
sdxSpreadSheetActionInsertSheetHint="插入页"
sdxSpreadSheetActionMergeCellsAcrossCaption="跨越合并"
sdxSpreadSheetActionMergeCellsAcrossHint="跨越合并"
sdxSpreadSheetActionMergeCellsAndCenterCaption="合并后居中"
sdxSpreadSheetActionMergeCellsAndCenterHint="合并后居中"
sdxSpreadSheetActionMergeCellsCaption="合并单元格"
sdxSpreadSheetActionMergeCellsHint="合并单元格"
sdxSpreadSheetActionNewCommentCaption="新的评论"
sdxSpreadSheetActionNewCommentHint="新的评论"
sdxSpreadSheetActionNewDocumentCaption="新建"
sdxSpreadSheetActionNewDocumentHint="新建"
sdxSpreadSheetActionNextCommentCaption="下一个评论"
sdxSpreadSheetActionNextCommentHint="下一个评论"
sdxSpreadSheetActionOpenDocumentCaption="打开"
sdxSpreadSheetActionOpenDocumentHint="打开"
sdxSpreadSheetActionPasteSelectionCaption="粘贴"
sdxSpreadSheetActionPasteSelectionHint="粘贴"
sdxSpreadSheetActionProtectSheetCaption="保护页"
sdxSpreadSheetActionRedoCaption="重做"
sdxSpreadSheetActionRedoHint="重做"
sdxSpreadSheetActionSaveDocumentAsCaption="另存为"
sdxSpreadSheetActionSaveDocumentAsHint="另存为"
sdxSpreadSheetActionShowConditionalFormattingRulesManagerCaption="管理规则"
sdxSpreadSheetActionShowConditionalFormattingRulesManagerHint="管理规则"
sdxSpreadSheetActionShowHideCommentsCaption="显示 / 隐藏 注释"
sdxSpreadSheetActionShowHideCommentsHint="显示 / 隐藏 注释"
sdxSpreadSheetActionShowHyperlinkEditorCaption="超链接"
sdxSpreadSheetActionShowHyperlinkEditorHint="超链接"
sdxSpreadSheetActionSortAscendingCaption="排序A到Z"
sdxSpreadSheetActionSortAscendingHint="排序A到Z"
sdxSpreadSheetActionSortDescendingCaption="排序Z到A"
sdxSpreadSheetActionSortDescendingHint="排序Z到A"
sdxSpreadSheetActionTextIndentDecreaseCaption="减少缩进"
sdxSpreadSheetActionTextIndentDecreaseHint="减少缩进"
sdxSpreadSheetActionTextIndentIncreaseCaption="增加缩进"
sdxSpreadSheetActionTextIndentIncreaseHint="增加缩进"
sdxSpreadSheetActionTextWrapCaption="文字换行"
sdxSpreadSheetActionTextWrapHint="文字换行"
sdxSpreadSheetActionToggleFontBoldHint="粗体"
sdxSpreadSheetActionUnfreezePanesCaption="取消冻结窗格"
sdxSpreadSheetActionUnfreezePanesHint="取消冻结窗格"
sdxSpreadSheetActionUngroupColumnsCaption="取消列组"
sdxSpreadSheetActionUngroupColumnsHint="取消列组"
sdxSpreadSheetActionUngroupRowsCaption="取消行组"
sdxSpreadSheetActionUngroupRowsHint="取消行组"
sdxSpreadSheetActionUnhideColumnsCaption="显示隐藏列"
sdxSpreadSheetActionUnhideColumnsHint="显示隐藏列"
sdxSpreadSheetActionUnhideRowsCaption="显示隐藏行"
sdxSpreadSheetActionUnhideRowsHint="显示隐藏行"
sdxSpreadSheetActionUnhideSheetCaption="显示隐藏页"
sdxSpreadSheetActionUnhideSheetHint="显示隐藏页"
sdxSpreadSheetActionUnmergeCellsCaption="取消单元格合并"
sdxSpreadSheetActionUnmergeCellsHint="取消单元格合并"
sdxSpreadSheetActionZoomInCaption="缩小"
sdxSpreadSheetActionZoomInHint="缩小"
sdxSpreadSheetActionZoomOutCaption="放大"
sdxSpreadSheetActionZoomOutHint="放大"
sdxSquare="正方形"
sdxStandardBar="标准"
sdxStandardStyle="标准样式"
sdxStartFromActiveDetails="从当前细节开始"
sdxStartLabelCaption="开始:"
sdxStateImages="状态图像(&S)"
sdxStatus="状态:"
sdxStatusGenerateReport="创建报表。已完成 %d%%"
sdxStatusPrinting="正在打印。已完成 %d 页"
sdxStatusReady="就绪"
sdxStyle="样式(&S):"
sdxStyleName="样式名称(&N):"
sdxStyles="样式"
sdxStyleSheetNameAlreadyExists="样式表"%s"已存在"
sdxStyleSheets="样式表"
sdxSubjectLabelCaption="主题:"
sdxSummary="概要"
sdxSummaryFormat="计数 = 0"
sdxSuppressBackgroundBitmaps="压缩背景纹理(&S)"
sdxSuppressContentColoration="禁止内容的着色(&C)"
sdxSuppressSourceFormats="禁止源格式(&S)"
sdxSwimmingPool="游泳池"
sdxSysColor3DDkShadow="三维暗阴影"
sdxSysColor3DLight="三维亮"
sdxSysColorActiveBorder="活动边框"
sdxSysColorActiveCaption="活动标题"
sdxSysColorAppWorkSpace="应用程序工作空间"
sdxSysColorBackground="背景"
sdxSysColorBtnFace="按钮表面"
sdxSysColorBtnHighligh="按钮高亮"
sdxSysColorBtnShadow="按钮阴影"
sdxSysColorBtnText="按钮文本"
sdxSysColorCaptionText="标题字体"
sdxSysColorGrayText="灰色字体"
sdxSysColorHighLight="高亮"
sdxSysColorHighLighText="高亮文本"
sdxSysColorInactiveBorder="非活动边框"
sdxSysColorInactiveCaption="不活动标题栏"
sdxSysColorInactiveCaptionText="不活动标题文字"
sdxSysColorInfoBk="信息背景"
sdxSysColorInfoText="信息文本"
sdxSysColorMenu="菜单"
sdxSysColorMenuText="菜单文字"
sdxSysColorScrollBar="滚动条"
sdxSysColorWindow="窗口"
sdxSysColorWindowFrame="窗口框架"
sdxSysColorWindowText="窗口文本"
sdxSystemProgrammers="系统程序员"
sdxTabbedMDIManagerAlreadyExists="TabbedMDIManager已存在"
sdxTabbedMDIManagerFormIsNotMainForm="选项卡式MDI管理器窗体不是应用程序的主窗体"
sdxTabbedMDIManagerFormIsNotMDIForm="选项卡式MDI管理器窗体不是MDI窗体"
sdxTabbedMDIOwnerIsNotForm="所有者不是TForm"
sdxTabPrintStyles="打印样式"
sdxTabs="标签页"
sdxTall="页高(&T)"
sdxTaskPad="任务板"
sdxTechnicalDepartment="技术部门"
sdxText="文本(&T)"
sdxTextAlign="文本排列(&A)"
sdxTextAlignBottom="下"
sdxTextAlignCenter="居中"
sdxTextAlignHorz="水平(&Z)"
sdxTextAlignJustified="对齐"
sdxTextAlignLeft="左"
sdxTextAlignRight="右"
sdxTextAlignTop="上"
sdxTextAlignVCenter="居中"
sdxTextAlignVert="垂直(&V)"
sdxTexture="纹理(&T)"
sdxTextureBlueTissuePaper="蓝色砂纸"
sdxTextureBouquet="花束"
sdxTextureBrownMarble="棕色大理石"
sdxTextureCanvas="画布"
sdxTextureCork="软木塞"
sdxTextureDenim="斜纹布"
sdxTextureFishFossil="鱼类化石"
sdxTextureGranite="花岗岩"
sdxTextureGreenMarble="绿色大理石"
sdxTextureMediumWood="深色木质"
sdxTextureNewSprint="新闻纸"
sdxTextureOak="栎木"
sdxTexturePaperBag="纸袋"
sdxTexturePapyrus="纸莎草纸"
sdxTextureParchment="羊皮纸"
sdxTexturePinkMarble="粉色砂纸"
sdxTexturePurpleMesh="紫色网格"
sdxTextureRecycledPaper="再生纸"
sdxTextureSand="沙滩"
sdxTextureStationary="信纸"
sdxTextureWalnut="胡桃"
sdxTextureWaterDroplets="水滴"
sdxTextureWhiteMarble="白色大理石"
sdxTextureWonenMat="编织物"
sdxThereAreNowItemsForShow="没有项目"
sdxThereIsNoPictureToDisplay="无图片可显示"
sdxThickCrossHatchFillPattern="粗对角线剖面线"
sdxThickness="宽度:"
sdxThickSolidEdgePattern="粗实线"
sdxThinDiagonalCrossHatchFillPattern="细对角线剖面线"
sdxThinDiagonalStripeFillPattern="细对角线条纹"
sdxThinHorizontalCrossHatchFillPattern="细水平剖面线"
sdxThinHorizontalStripeFillPattern="细水平条纹"
sdxThinReverseDiagonalStripeFillPattern="细逆对角线条纹"
sdxThinSolidEdgePattern="中实线"
sdxThinVerticalStripeFillPattern="细垂直条纹"
sdxTitleModeNone="无"
sdxTitleModeOnEveryTopPage="在每张顶页"
sdxTitleModeOnFirstPage="在第一页"
sdxTLBand="项目数据"
sdxTLColumnAxisymmetric="轴对称"
sdxTLColumnItemShape="形状"
sdxTLColumnName="名称"
sdxTop="上(&T):"
sdxTopMargin="上边距"
sdxTotal="合计"
sdxTPicture="TPicture"
sdxTransparent="透明(&T)"
sdxTransparentColumnGraphics="图形透明(&G)"
sdxTransparentGraphics="图形透明(&T)"
sdxTransparentRichEdits="RichEdit内容透明(&R)"
sdxTransparents="透明"
sdxTreeEffects="树效果"
sdxTreeLines="树线(&T)"
sdxTreeLinesColor="树线颜色(&R):"
sdxTrue="True"
sdxTwoPages="两页"
sdxUnableToGenerateReport="不能生成报表"
sdxUncheckAllChildren="取消选中所有的子项(&A)"
sdxUnhideSheetDialogCaption="显示"
sdxUnhideSheetDialogHiddenSheets="显示页(&U):"
sdxUnitPrice="单位价格"
sdxUnitsCentimeters="厘米"
sdxUnitsCentimetersName="厘米"
sdxUnitsDefaultName="默认"
sdxUnitsInches="在..中"
sdxUnitsInchesName="英寸"
sdxUnitsMillimeters="毫米"
sdxUnitsMillimetersName="毫米"
sdxUnitsPicas="像素"
sdxUnitsPicasName="点"
sdxUnitsPoints="磅"
sdxUnitsPointsName="点"
sdxUnmergeCellsConfirmation="确定取消合并的单元格?"
sdxUnnamedStyleSheet="未命名"
sdxUnwrap="自动折行(&U)"
sdxUnwrapTabs="不换行的标签页(&U)"
sdxUnwrapTopLevel="禁止顶层自动折行(&W)"
sdxUse3DEffects="使用三维效果(&3)"
sdxUseNativeStyles="使用本地样式(&U)"
sdxUserDefined="[自定义]"
sdxVertAlignBottom="靠下"
sdxVertAlignCenter="居中"
sdxVertAlignDistributed="分散对齐"
sdxVertAlignJustify="两端对齐"
sdxVertAlignment="垂直对齐"
sdxVertAlignTop="靠上"
sdxVertical="垂直(&V)"
sdxVerticalFillPattern="垂直"
sdxVertically="垂直(&V)"
sdxVerticalStripeFillPattern="垂直条纹"
sdxVertLines="垂直线(&V)"
sdxViewAlreadyExists="相同的视图 = %d 已经存在。"
sdxViewTab="视图"
sdxVisible="可见(&V)"
sdxWeek="周"
sdxWest="西方"
sdxWholePage="整页"
sdxWidenToSourceWidth="扩展到原始宽度"
sdxWidth="宽"
sdxWizardControlButtonBack="上一步(&B)"
sdxWizardControlButtonCancel="取消(&C)"
sdxWizardControlButtonFinish="完成(&F)"
sdxWizardControlButtonHelp="帮助(&H)"
sdxWizardControlButtonNext="下一步(&N)"
sdxWizardControlErrorWrongChild="只能插入一个TdxWizardControlPage到TdxWizardControl中。"
sdxWizardControlErrorWrongPageIndex="%d不是有效的PageIndex值. PageIndex必须在0到%d之间"
sdxWizardControlErrorWrongParent="只能插入一个TdxWizardControlPage到TdxWizardControl中。"
sdxWizardControlPageDefaultDescription="页描述:这将帮助用户完成一个子任务"
sdxWizardControlPageDefaultTitle="页标题"
sdxWrapData="自动折行(&W)"
sdxWrapRecords="记录折行(&W)"
sdxZoomDlgCaption="缩放"
sdxZoomDlgFontPreview=" 12pt Times New Roman "
sdxZoomDlgFontPreviewString="AaBbCcDdEeXxYyZz"
sdxZoomDlgFourPages="四页(&F)"
sdxZoomDlgManyPages="多页(&M):"
sdxZoomDlgPageWidth="页宽(&W)"
sdxZoomDlgPercent="百分比(&E):"
sdxZoomDlgPreview=" 预览 "
sdxZoomDlgTwoPages="两页(&T)"
sdxZoomDlgWholePage="整页(&H)"
sdxZoomDlgZoomTo=" 缩放至 "
sdxZoomParameters=" 缩放(&P) "
secxAllDay="全天"
secxAlldayevent="全天事件"
secxBillingInformation="次序"
secxCategories="分类"
secxDescription="描述"
secxEndDate="结束日期"
secxEndTime="结束时间"
secxExportStorageInvalid="没有指派存储"
secxFalse="FALSE"
secxFinish="完成"
secxLocation="位置"
secxMeetingOrganizer="会议组织者"
secxMeetingResources="会议资源"
secxMileage="目的"
secxNo="否"
secxNormal="一般"
secxOptionalAttendees="可选与会者"
secxPriority="优先"
secxPrivate="私人"
secxReminder="提醒"
secxReminderDate="提醒日期"
secxReminderonoff="提醒开关"
secxReminderTime="提醒时间"
secxRequiredAttendees="必选与会者"
secxSensitivity="敏感"
secxSetDateRangeAnd="并且"
secxSetDateRangeCaption="设置日期范围"
secxSetDateRangeText="导出并创建单个的约会或任务之间发生的事件:""
secxShowtimeas="时间显示"
secxStart="开始"
secxStartDate="起始日期"
secxStartTime="起始时间"
secxState="状态"
secxSubject="主题"
secxTrue="TRUE"
secxYes="是"
SHintCaption="示例"
SHintText="预览提示"
SShellDefaultModifiedStr="已修改"
SShellDefaultNameStr="名称"
SShellDefaultSizeStr="尺寸"
SShellDefaultTypeStr="类型"
SXmlCanNotBindToReservedNamespace="无法绑定到保留的命名空间。"
SXmlCannotStartDocumentOnFragment="使用ConformanceLevel.Fragment创建的WriteStartDocument不能调用。"
SXmlCannotWriteXmlDecl="无法写入 XML 声明。XML 声明可以仅在文档的开头。"
SXmlClosedOrError="编写器已关闭或处于错误状态。"
SXmlConformanceLevelFragment="请确保 ConformanceLevel 设置被设置为 ConformanceLevel.Fragment 或 ConformanceLevel.Auto,乳沟你要写入一个XML片段.""
SXmlDupAttributeName=""%s"是一个重复的属性名称。"
SXmlDupXmlDecl="无法写入 XML 声明。WriteStartDocument 方法已经写了它。"
SXmlEmptyLocalName="空字符串不是有效的本地名称。"
SXmlEmptyName="空字符串不是有效的名称。"
SXmlIndentCharsNotWhitespace="XmlWriterSettings.CheckCharacters 和 XmlWriterSettings.NewLineOnAttributes 时，XmlWriterSettings.%s 可以包含只有有效的 XML 空白字符。""
SXmlInvalidCharacter="%s, 十六进制值%s,是一个无效的字符。"
SXmlInvalidCharsInIndent="当XmlWriterSettings.CheckCharacters为True时,WriterSettings.%s只有包含有效的XML文本内容字符. %s"
SXmlInvalidHighSurrogateChar="无效的高代理项字符(%s).一个高代理项字符必须有一个值，范围(0xD800 - 0xDBFF)。"
SXmlInvalidNameCharsDetail=""%s"中有无效的名称字符. %d个字符,十六进制值%s,不能包含在一个名称中。"
SXmlInvalidOperation="由于该对象的当前状态，操作无效。"
SXmlInvalidSurrogateMissingLowChar="代理项对是无效的。缺少一个低代理项字符。"
SXmlInvalidSurrogatePair="代理项对 (%s，%s) 是无效的。一个高代理项字符 (0xD800-0xDBFF) 总是必须搭配低代理项字符 (0xDC00-0xDFFF)。""
SXmlInvalidXmlSpace=""%s"是一个无效的xml:空值。"
SXmlNamespaceDeclXmlXmlns="前缀"%s"无法映射到命名空间名称为"xml"或"xmlns"保留。"
SXmlNonWhitespace="只能使用空白字符。"
SXmlNoRoot="文档没有根元素。"
SXmlNoStartTag="没有XML开始标记是开放的。"
SXmlNotImplemented="未实现。"
SXmlNotSupported="不支持。"
SXmlPrefixForEmptyNs="不能使用空的命名空间前缀。"
SXmlRedefinePrefix="前缀"%s"不能重新定义从"%s"到"%s"的相同的开始元素标记内。"
SXmlUndefNamespace="命名空间"%s"没定义。"
SXmlWrongToken="令牌 ord = %d 在状态 ord = %d 会导致无效的 XML 文档。"
SXmlXmlnsPrefix="前缀"xmlns"供 XML 的使用。"
SXmlXmlPrefix="前缀"xml"用于按保留 XML 并可以映射只到命名空间信息名称"http://www.w3.org/XML/1998/namespacequot"(&Q)"
USA_STR="美国"

[Custom Resource Strings]
CHINA_STR="China"
USA_STR="USA"

 

转载于:https://www.cnblogs.com/usegear/p/10543216.html