GreatSQL执行Update失败案例分析
GreatSQL执行Update失败案例分析
一 问题概述
业务反馈在应用核心库的用户基本信息表执行部分update命令失败，报错如下：
update xxx.xxx_staffbasicinfo set staffidstatus='04’ where staffid in (select * from duyuanyu.tmp_d_xiaoyuan ) > 1265 Data truncated for column 'NOTMODSTATUS at row 1 二 问题分析
经过分析表结构，没有发现异常。
2.1 问题初步定位
$ perror 1265 MySQL error code MY-001265 (WARN_DATA_TRUNCATED): Data truncated for column '%s' at row %ld 进一步分析对于该表的存储过程、触发器等，发现 xxx.xxx_staffbasicinfo 表上建了8个触发器，其中有包括3个update类型触发器。
分析每个update类型触发器，发现xxx.xxx_STAFFBASICINFO_U 触发器作用是在满足指定条件时将xxx.xxx_staffbasicinfo原来记录或者新的记录insert 到xxx.xxx__STAFFBASICINFO_LOG表中
GreatSQL [information_schema]> show create trigger xxx.xxx_STAFFBASICINFO_U\G
*************************** 1. row ***************************
Trigger: xxx_STAFFBASICINFO_U
sql_mode: PIPES_AS_CONCAT,ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION
SQL Original Statement: CREATE DEFINER=`icdpub`@`%` TRIGGER `TRG_T_UCP_STAFFBASICINFO_U` AFTER UPDATE ON `t_ucp_staffbasicinfo` FOR EACH ROW BEGIN
DECLARE v_havenew BOOLEAN DEFAULT FALSE;
DECLARE v_haveold BOOLEAN DEFAULT FALSE;
DECLARE v_action VARCHAR(32);
DECLARE v_staffid_ct BIGINT;
select count(STAFFID) into v_staffid_ct from xxx.lpr_sys_staff where STAFFID=old.STAFFID;
set v_havenew := TRUE;
set v_action := 'UPDATE';
set v_haveold := TRUE;
IF TRUE = v_haveold and v_staffid_ct>0
THEN
INSERT INTO xxx.xxx_staffbasicinfo_log (STAFFID,
STAFFNAME,
STAFFSTATE,
STAFFIDSTATUS,
DLEVELID,
DLMODULUS,
SECONDPOST,
DUTYID,
SECONDDUTY,
PTEAMID,
ORGAID,
POSTID,
STAFFACCOUNT,
DISABLEBEGINDATE,
DISABLEENDDATE,
HOSTEDCCID,
PERSONALCFGID,
UPDATETIME,
BATCHNO,
STAFFTYPE,
ISMANAGER,
HRSTATUS,
CREATEDATE,
STATUSDATE,
REMARK,
REGION,
BEGINDATE,
ENDDATE,
RELESTAFFID,
WORKEFFICIENCY,
TELNO,
LOGINTYPE,
WORKTYPE,
AREAID,
EMPLOYEETYPE,
STAFFNUMBER,
STAFFIDUSE,
ISADMIN,
PETNAME,
ISMODIFYCONTROL,
RESPCITYID,
NOTMODSTATUS,
t_operator,
t_action,
t_date,
t_remark)
VALUES (old.STAFFID,
old.STAFFNAME,
old.STAFFSTATE,
old.STAFFIDSTATUS,
old.DLEVELID,
old.DLMODULUS,
old.SECONDPOST,
old.DUTYID,
old.SECONDDUTY,
old.PTEAMID,
old.ORGAID,
old.POSTID,
old.STAFFACCOUNT,
old.DISABLEBEGINDATE,
old.DISABLEENDDATE,
old.HOSTEDCCID,
old.PERSONALCFGID,
old.UPDATETIME,
old.BATCHNO,
old.STAFFTYPE,
old.ISMANAGER,
old.HRSTATUS,
old.CREATEDATE,
old.STATUSDATE,
old.REMARK,
old.REGION,
old.BEGINDATE,
old.ENDDATE,
old.RELESTAFFID,
old.WORKEFFICIENCY,
old.TELNO,
old.LOGINTYPE,
old.WORKTYPE,
old.AREAID,
old.EMPLOYEETYPE,
old.STAFFNUMBER,
old.STAFFIDUSE,
old.ISADMIN,
old.PETNAME,
old.ISMODIFYCONTROL,
old.RESPCITYID,
old.NOTMODSTATUS,
USER(),
v_action,
SYSDATE(),
'old');
END IF;
IF TRUE = v_havenew and v_staffid_ct>0
THEN
INSERT INTO xxx.xxx_staffbasicinfo_LOG (STAFFID,
STAFFNAME,STAFFSTATE,STAFFIDSTATUS,DLEVELID,DLMODULUS,SECONDPOST,
DUTYID,SECONDDUTY,PTEAMID,ORGAID,POSTID,STAFFACCOUNT,
DISABLEBEGINDATE,DISABLEENDDATE,HOSTEDCCID,
PERSONALCFGID,UPDATETIME,BATCHNO,STAFFTYPE,ISMANAGER,HRSTATUS,CREATEDATE,
STATUSDATE,REMARK,REGION,BEGINDATE,ENDDATE,RELESTAFFID,WORKEFFICIENCY,TELNO,
LOGINTYPE,WORKTYPE,AREAID,EMPLOYEETYPE,STAFFNUMBER,STAFFIDUSE,ISADMIN,
PETNAME,ISMODIFYCONTROL,RESPCITYID,NOTMODSTATUS,t_operator,t_action,
t_date,t_remark)
VALUES (new.STAFFID,
new.STAFFNAME,
new.STAFFSTATE,
new.STAFFIDSTATUS,
new.DLEVELID,
new.DLMODULUS,
new.SECONDPOST,
new.DUTYID,
new.SECONDDUTY,
new.PTEAMID,
new.ORGAID,
new.POSTID,
new.STAFFACCOUNT,
new.DISABLEBEGINDATE,
new.DISABLEENDDATE,
new.HOSTEDCCID,
new.PERSONALCFGID,
new.UPDATETIME,
new.BATCHNO,
new.STAFFTYPE,
new.ISMANAGER,
new.HRSTATUS,
new.CREATEDATE,
new.STATUSDATE,
new.REMARK,
new.REGION,
new.BEGINDATE,
new.ENDDATE,
new.RELESTAFFID,
new.WORKEFFICIENCY,
new.TELNO,
new.LOGINTYPE,
new.WORKTYPE,
new.AREAID,
new.EMPLOYEETYPE,
new.STAFFNUMBER,
new.STAFFIDUSE,
new.ISADMIN,
new.PETNAME,
new.ISMODIFYCONTROL,
new.RESPCITYID,
new.NOTMODSTATUS,
USER(),
v_action,
SYSDATE(),
'new');
END IF;
END
character_set_client: utf8mb4
collation_connection: utf8mb4_0900_ai_ci
Database Collation: utf8mb4_0900_bin
Created: 2022-04-13 00:32:05.13
1 row in set (0.01 sec)但xxx.XXX_STAFFBASICINFO_LOG表NOTMODSTATUS字段为 varchar(1) ，而 xxx.xxx_staffbasicinfo表NOTMODSTATUS字段为 varchar(8),字段长度不足导致insert失败。
GreatSQL [information_schema]> desc xxx.XXX_STAFFBASICINFO_LOG -> ;
+------------------+--------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+------------------+--------------+------+-----+---------+-------+
| STAFFID | varchar(20) | NO | | NULL | |
| STAFFNAME | varchar(100) | NO | | NULL | |
| STAFFSTATE | varchar(2) | NO | | NULL | |
| STAFFIDSTATUS | varchar(2) | NO | | NULL | |
......
......
| ISADMIN | varchar(1) | YES | | NULL | |
| PETNAME | varchar(100) | YES | | NULL | |
| ISMODIFYCONTROL | varchar(1) | YES | | NULL | |
| RESPCITYID | varchar(40) | YES | | NULL | |
| NOTMODSTATUS | varchar(1) | YES | | NULL | |
| T_OPERATOR | varchar(100) | YES | | NULL | |
| T_ACTION | varchar(100) | YES | | NULL | |
| T_DATE | datetime | YES | | NULL | |
| T_REMARK | varchar(100) | YES | | NULL | |
+------------------+--------------+------+-----+---------+-------+
46 rows in set (0.01 sec)1 row in set (0.00 sec)
GreatSQL [information_schema]> desc xxx.xxx_staffbasicinfo;
+------------------+--------------+------+-----+-------------------+-------------------+
| Field | Type | Null | Key | Default | Extra |
+------------------+--------------+------+-----+-------------------+-------------------+
| STAFFID | varchar(20) | NO | PRI | NULL | |
| STAFFNAME | varchar(100) | NO | | NULL | |
| STAFFSTATE | varchar(2) | NO | | NULL | |
....
| ISMODIFYCONTROL | varchar(1) | YES | | 0 | |
| RESPCITYID | varchar(40) | YES | | NULL | |
| NOTMODSTATUS | varchar(8) | YES | | NULL | |
| CURRENTORGAID | varchar(32) | YES | MUL | NULL | |
| CURRENTREGION | int | YES | | NULL | |
| SALESCENE | varchar(2) | YES | | NULL | |
| CHANNELTYPE | varchar(2) | YES | | NULL | |
| LOGINCHKPHOTO | varchar(2) | YES | | 0 | |
| UPLOADPHOTO | varchar(2) | YES | | 0 | |
| USERNAME | varchar(100) | YES | | NULL | |
| JKAPPROLE | varchar(64) | YES | | NULL | |
| JKAPPLEVEL | varchar(1) | YES | | NULL | |
| UPLOADPHOTODATE | date | YES | | NULL | |
| UPLOADPHOTOOPER | varchar(32) | YES | | NULL | |
+------------------+--------------+------+-----+-------------------+-------------------+
53 rows in set (0.01 sec)以前长期运行过程中，未暴露此问题的原因是由于NOTMODSTATUS字段在之前处理的记录中全部为null。
GreatSQL [information_schema]> select NOTMODSTATUS ,count(*) from xxx.XXX_STAFFBASICINFO_LOG group by NOTMODSTATUS;
+--------------+----------+
| NOTMODSTATUS | count(*) |
+--------------+----------+
| NULL | 762 |
+--------------+----------+
1 row in set (0.00 sec)2.2 问题复现
greatsql> show create table students\G
*************************** 1. row ***************************
Table: students
Create Table: CREATE TABLE `students` (
`id` int NOT NULL,
`name` varchar(20) DEFAULT NULL,
`chinese` int DEFAULT NULL,
PRIMARY KEY (`id`),
KEY `ind_chinese` (`chinese`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci STATS_PERSISTENT=0 STATS_AUTO_RECALC=0 STATS_SAMPLE_PAGES=100
1 row in set (0.00 sec)
greatsql> CREATE TABLE `students_hist` (
-> `id` int NOT NULL,
-> `name` varchar(10) DEFAULT NULL,
-> `chinese` int DEFAULT NULL,
-> PRIMARY KEY (`id`),
-> KEY `ind_chinese` (`chinese`)
-> ) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci STATS_PERSISTENT=0 STATS_AUTO_RECALC=0 STATS_SAMPLE_PAGES=100;
Query OK, 0 rows affected (0.41 sec)
greatsql> CREATE TRIGGER tri_update_stu
-> BEFORE update
-> ON test.students FOR EACH ROW
-> insert into test.students_hist (id,name,chinese) values (OLD.id,OLD.name,OLD.chinese);
Query OK, 0 rows affected (0.01 sec)在students表上执行update语句
greatsql> select * from students;
+----+----------------+---------+
| id | name | chinese |
+----+----------------+---------+
| 1 | yaojunz | 99 |
| 5 | yaojunzhuo8000 | 72 |
| 6 | zhao | 88 |
| 10 | xiao | 90 |
+----+----------------+---------+
4 rows in set (0.00 sec)
greatsql> update students set name='yaojunzhuo80000' where id=5;
ERROR 1265 (01000): Data truncated for column 'name' at row 1三 解决方案
将xxx.xxx_staffbasicinfo表上触发器中所涉及表的表字段和xxx.xxx_staffbasicinfo修改为一致，问题得到解决。
Enjoy GreatSQL :)
关于 GreatSQL
GreatSQL是适用于金融级应用的国内自主开源数据库，具备高性能、高可靠、高易用性、高安全等多个核心特性，可以作为MySQL或Percona Server的可选替换，用于线上生产环境，且完全免费并兼容MySQL或Percona Server。
相关链接： GreatSQL社区 Gitee GitHub Bilibili
GreatSQL社区：
社区有奖建议反馈： https://greatsql.cn/thread-54-1-1.html
社区博客有奖征稿详情： https://greatsql.cn/thread-100-1-1.html
（对文章有疑问或者有独到见解都可以去社区官网提出或分享哦~）
技术交流群：
微信&QQ群：
QQ群：533341697
微信群：添加GreatSQL社区助手（微信号：wanlidbc ）好友，待社区助手拉您进群。